When fixing my loose stylus I managed to break the small spring loaded volume slider. It appears that when I disassembled I lost a part that fits between the slider button and the electronic component on the circuit board. Does anyone know if there is a removeable part here that can be lost? Anyone want to donate one. Or lastly how about a place to buy one? Thanks.
Anyone have any spare volume slider button to sell ? Mine on black DOPOD 818 Pro is broken, desperately need the replacement. Help please... Thank you....
congpay said:
Anyone have any spare volume slider button to sell ? Mine on black DOPOD 818 Pro is broken, desperately need the replacement. Help please... Thank you....
Click to expand...
Click to collapse
I have sets of spare buttons. The side buttons (camera, volume slider, comm manager, power, that purple plastic bit that covers the infrared, and the little rubber thing that goes on the camera panel above the speaker) are $5 for the set. Delivery is about $3.
Nicholas, thanks for the reply. Anyway, please check your PM. Hope we could do business immediately...
Hi All,
I broke my DHD volume button and I order a new one from eBay.
Does any body know what is the right way to replace it ( I want to do it by my self) ?
I didn't nothing on YouTube
Thanks
Kobibo said:
Hi All,
I broke my DHD volume button and I order a new one from eBay.
Does any body know what is the right way to replace it ( I want to do it by my self) ?
I didn't nothing on YouTube
Thanks
Click to expand...
Click to collapse
Here's the official HTC-Video for disassembling the Device.
Take out the back cover of the phone n i mean only the back aluminium cover as shown in the video thn fit the new volume keys where the old ones used to b but remember to put the end with the steel on the upper side and one with rubber on the bottom side though u might need to slightly bend the volume keys to be able to fit thm in but be gentle and careful not to bend it too much tht it breaks just a little but so that u can get the rubber end in.once it press the volume keys down to level the bend which may hv caused prevoiusly.n voillla ur volume keys are fixed.u dnt need to do anything else.hope this helps
Sent from my Desire HD using xda premium
hi all.
Please, don't shout me! I would like as much help as possible for my damage :crying:. I am concerned, i don't know what else I can do!
Unfortunately, while I mounted the new digitizer to my defy I mistakenly blew up a piece of the motherboard. the piece in question is the power/lock button.
here's how the power and volume buttons are normally presented and my power button is presented on the motherboard.
I looked all over the web for repairing this damage or to buy directly a new motherboard. the problem is that on the web are not for sell replacement parts like this
I also suggested to bring it to assistance putting all the small pieces of broken button inside the phone to make it look like a fault, but it's clearly visible that the phone is half worn considering the new digitizer and the screws are stripped so you can see clearly that was disassembled and tampered...can anybody help me?
N34S said:
hi all.
Please, don't shout me! I would like as much help as possible for my damage :crying:. I am concerned, i don't know what else I can do!
Unfortunately, while I mounted the new digitizer to my defy I mistakenly blew up a piece of the motherboard. the piece in question is the power/lock button.
here's how the power and volume buttons are normally presented and my power button is presented on the motherboard.
I looked all over the web for repairing this damage or to buy directly a new motherboard. the problem is that on the web are not for sell replacement parts like this
I also suggested to bring it to assistance putting all the small pieces of broken button inside the phone to make it look like a fault, but it's clearly visible that the phone is half worn considering the new digitizer and the screws are stripped so you can see clearly that was disassembled and tampered...can anybody help me?
Click to expand...
Click to collapse
It's broken so needs replacement with a new 'tact' switch by soldering a replacement in it's place. I repair similar equipment and know it's possible to do although not a home diy repair unless you're skillful with a soldering iron and can buy the replacement part. I would hope a phone repair workshop could help with this.
Tact switches come in all shapes and sizes so you need to find a suitable one.
Sorry it's not much help.
edit: This site sells them:http://stellatech.com/site_stellatech/motorola-defy-mb525-power-switch-(electrical),a,en,811504.html
and these on Ebay look similar (but only a quess) http://www.ebay.co.uk/itm/10pcs-4-7...al_Components_Supplies_ET&hash=item460b40052a
spannerz said:
It's broken so needs replacement with a new 'tact' switch by soldering a replacement in it's place. I repair similar equipment and know it's possible to do although not a home diy repair unless you're skillful with a soldering iron and can buy the replacement part. I would hope a phone repair workshop could help with this.
Tact switches come in all shapes and sizes so you need to find a suitable one.
Sorry it's not much help.
edit: This site sells them:http://stellatech.com/site_stellatech/motorola-defy-mb525-power-switch-(electrical),a,en,811504.html
and these on Ebay look similar (but only a quess) http://www.ebay.co.uk/itm/10pcs-4-7...al_Components_Supplies_ET&hash=item460b40052a
Click to expand...
Click to collapse
I never thought of being able to fix something like that The important thing is that one can fix this damage and that's really enough now there's nothing left for me to order those buttons and to solder it on the mobo. I have found those momentary tact buttons that you linked from ebay on amazon.com so I can ship it in my country I have the uncle of my friend who has a soldier station that can do the job thank you so much for the answer, you've given back my hope :victory:
and sorry for my bad english!
N34S said:
I never thought of being able to fix something like that The important thing is that one can fix this damage and that's really enough now there's nothing left for me to order those buttons and to solder it on the mobo. I have found those momentary tact buttons that you linked from ebay on amazon.com so I can ship it in my country I have the uncle of my friend who has a soldier station that can do the job thank you so much for the answer, you've given back my hope :victory:
and sorry for my bad english!
Click to expand...
Click to collapse
When soldering the new part be very careful! - do not heat the pins of the tact switch for too long or you'll possibly damage the new tact switch. These items are very small and the heat from the soldering iron can damage if you keep soldering the metal legs too long. Good luck!
N34S said:
hi all.
Please, don't shout me! I would like as much help as possible for my damage :crying:. I am concerned, i don't know what else I can do!
Unfortunately, while I mounted the new digitizer to my defy I mistakenly blew up a piece of the motherboard. the piece in question is the power/lock button.
here's how the power and volume buttons are normally presented and my power button is presented on the motherboard.
I looked all over the web for repairing this damage or to buy directly a new motherboard. the problem is that on the web are not for sell replacement parts like this
I also suggested to bring it to assistance putting all the small pieces of broken button inside the phone to make it look like a fault, but it's clearly visible that the phone is half worn considering the new digitizer and the screws are stripped so you can see clearly that was disassembled and tampered...can anybody help me?
Click to expand...
Click to collapse
most likely you have also damaged other parts of the board. replacing the power button may or may not fix it.
consider ordering a new/used board from china websites.
Can somebody identify this part that goes behind the volume and power buttons and gives it a clicky sound and feel. I accidentally lost it while replacing the housing. Hopefully I can find this part online so I could purchase it. Thanks