Ok, it seems there is a position sensor in TyTN (correct me if I'm wrong). When my phone is in its case on my belt and it's turned on (usually by a call), it's rotated (as if the keyboard's open). It takes too long time for it to rotate, and I can't answer the call until it rotates back to normal. So my question is, can this sensor be turned off, or is there other thing, that makes the screen to rotate and eventually how can I solve the problem? Thanks in advance.
P.S. I'm useing Schap's ROM, but the problem existed in the official rom, and the Black rom, and the official WM5 rom
no position sensor that I know of and I have never had this problem :s
[email protected]™ said:
Ok, it seems there is a position sensor in TyTN (correct me if I'm wrong). When my phone is in its case on my belt and it's turned on (usually by a call), it's rotated (as if the keyboard's open). It takes too long time for it to rotate, and I can't answer the call until it rotates back to normal. So my question is, can this sensor be turned off, or is there other thing, that makes the screen to rotate and eventually how can I solve the problem? Thanks in advance.
P.S. I'm useing Schap's ROM, but the problem existed in the official rom, and the Black rom, and the official WM5 rom
Click to expand...
Click to collapse
Yeah, there is a position sensor on the hermes. It's a magnetic sensor that detects whether the keyboard is open or not.
The problem is most likely your case. I've heard of issues like yours. The magnetic snap on the case fools the hermes into thinking the keyboard is open.
I don't believe that there is a fix to bypass the sensor, as it is hardware. But I may be wrong. If not then you might need to look at another case that uses velcro or something.
intrglctcrevfnk said:
Yeah, there is a position sensor on the hermes. It's a magnetic sensor that detects whether the keyboard is open or not.
The problem is most likely your case. I've heard of issues like yours. The magnetic snap on the case fools the hermes into thinking the keyboard is open.
I don't believe that there is a fix to bypass the sensor, as it is hardware. But I may be wrong. If not then you might need to look at another case that uses velcro or something.
Click to expand...
Click to collapse
ah now that would make sense, i never use that stupid case that comes with it, they are really ugly! so that would explain why i never noticed it.
My wife came up with a great solution when I had this poblem (standard case causing phone to start in landscape) - turn the phone the other way round! Now I have the screen facing my belt and the phone is ALWAYS in portrait when I get it out.
Sounds silly, but try it - it works!
Yep, that's a sollution, but there is one other detail. There's no other position I can plug the earphones .
[email protected]™ said:
Yep, that's a sollution, but there is one other detail. There's no other position I can plug the earphones .
Click to expand...
Click to collapse
Solution..... Bluetooth Headphones.
It appears to be a magnetic switch...
Your case must have a strong magnet on it, I can't get it to effect the switch if the phone is completely closed. Only if I have it partially open.
GldRush98 said:
It appears to be a magnetic switch...
Your case must have a strong magnet on it, I can't get it to effect the switch if the phone is completely closed. Only if I have it partially open.
Click to expand...
Click to collapse
I have exactly the same problem. Also, my phone is NEVER put into standby before closing the keyboard.
I'm going to try storing it with the screen facing towards my belt.
I simply use Brando case and HTC BT S-100 headset. and never have a problem with phone starting in landscape.
http://www.boxwave.com/images_bw/products/thumbnails/dlc_htc_tytn_frtbck_lg.jpg
FINALLY... WHAT YOU HAVE ALL BEEN WAITING FOR
Originally posted from here
shlomki said:
I've come to notice that no one REALLY knew how to fully disable screen rotation on WM devices.
Some offered 3rd party apps to get the job done, some only knew how to disable automatic rotation, but when the device went into standby and woke up again - the screen rotated back. So that didnt really work.
So if you're as desperate as i was about screen rotation,
this is what you need to do:
1. Get dotfred's free taskmanager HERE, and run it.
2. Go to "Devices" tab, and look for "MIS1:" device (oem_misc.dll)
3. Long-Tap on it, and tap on "Stop"
4. Long-Tap on it again, and now choose "Set Manual"
5. Go to "Notifications" tab, and look for "Notifications\NamedEvents\VCPowerWakeupEvent"
6. Tap on it to make it selected
7. Disable it
(In dotfred's taskmanager, there should be a button for disabling it, but for some reason some devices couldn't see the button icons, although the buttons are still clickable. Under the notifications list there is an empty light-blue line - the buttons are there, eventough you can't see them.
The disable buttons is somewhere i the middle of that light-blue line, just tap the center until a message box popps up and asks if you'd like to disable this notification - Tap on yes.)All those steps are a one time deal - they stick even after an SR.
This has been tested on htc universal and works great.
The screen will keep its orientation even if you flip your screen, take out your built in keyboard, or turn the device off and back on.
The only time your screen will revert back to the original orientation is when you soft reset your device.
Hope this helps
Click to expand...
Click to collapse
Confused Stu said:
My wife came up with a great solution when I had this problem (standard case causing phone to start in landscape) - turn the phone the other way round! Now I have the screen facing my belt and the phone is ALWAYS in portrait when I get it out.
Click to expand...
Click to collapse
It's also the way to receive less radiation in your body, because the GSM antenna is pointing away from your waist.
GldRush98 said:
It appears to be a magnetic switch...
Your case must have a strong magnet on it, I can't get it to effect the switch if the phone is completely closed. Only if I have it partially open.
Click to expand...
Click to collapse
I can, and I used a Tesla-meter to measure them:
in-between the two magnets of the case and the lid, there are around 150 mT (Millitesla) which is pretty much!
for comparison:
a usual horseshoe magnet would have 1 mT, the magnetic field of the earth has about 0,05 mT!
Related
It seems the magnet on our old kaiser cases make the tilt 2 screen turn on. We figured it out with a little help from the att sales guy cause the wife was getting pissed that every time she put the phone in the case, the screen turned on.
Cant seem to find any info about it, why it does this. Forget the sales people at the store. They dont know jack
I am also lookng for something that tells what the indicator lights should do. We get a solid left light for charge and a flashing left light for unread anything.
Though there should be a blue flash when blue tooth is enabled,
Judging by the kaiser,
Effects of Magnet on TP2
Yes I have Telstra model TP2 and i can confirm this behaviour as well with a case with magnetic clasp.Also I find that passing it by the magnet will also make TP2 go from portrait mode to landscape .I t can be very annoying because even locking TP2 makes no difference
It due to the keyboard sensor. The phone thinks you are sliding out the keyboard.
There is a patch to disable that "feature" (First thing i do when i install a new ROM)
Is it that or the stylus sensor?
Here's video...
To see this happening, here's a little video of the magnetic effect
http://www.blogologie.be/2009/06/htc-touch-pro-2-en-magnetisme.html
NearDenver said:
It due to the keyboard sensor. The phone thinks you are sliding out the keyboard.
There is a patch to disable that "feature" (First thing i do when i install a new ROM)
Click to expand...
Click to collapse
Do you have a link for this patch?
yes, please link us to the patch.
here's the post I used (key info below, not much else in the actual post): http://forum.ppcgeeks.com/showpost.php?p=1093353&postcount=37
reg edit to disable the ''Slide Wake Up''
[HKEY_LOCAL_MACHINE\Hardware\DeviceMap\Keybd] Create new dword "SlideWakeup" with value of 0 and soft reset.
To revert, delete the key or set it's data to 1
Hmmm, if thats the only way to stop the magnet problem, im not sure i am willing to do that. I like the slide to wake up thing.
well, the other way is a non-magnetic case
I just tried the above reg edit on my TP2 and it did indeed work as described on my unit.Thanks a lot eknutson
Just as an FYI, many if not all HTC devices with slide-out keyboards are like that. My Apache did it, my Kaiser did it, my TP2 does it.
It appears that the OEM case has a magnetic clasp (I just ordered an AT&T Tilt 2, which does not come with a case). Does the magnetic clasp on the OEM case cause the phone to turn on?
I would think a magnet is a magnet. OEM with magnets should see the same result.
I turned on my keyboard sound and ran the magnet over the tiny keypad and i heard the keyboard slide sound while the screen turned on.
I cannot reproduce it in my European pro 2. Am I doing something wrong, or is the case magnet too weak?
(I have lost the original case, and I have an EASECASE with 2 magnets now...)
carhigh said:
It seems the magnet on our old kaiser cases make the tilt 2 screen turn on. We figured it out with a little help from the att sales guy cause the wife was getting pissed that every time she put the phone in the case, the screen turned on.
Click to expand...
Click to collapse
[HKEY_LOCAL_MACHINE\Hardware\DeviceMap\Keybd] Create new dword "SlideWakeup" with value of 0 and soft reset.
ButtonBoy said:
[HKEY_LOCAL_MACHINE\Hardware\DeviceMap\Keybd] Create new dword "SlideWakeup" with value of 0 and soft reset.
Click to expand...
Click to collapse
Thanks for this reg edit....worked perfectly for me. I am a bit bummed I lost the wake to slide feature but the magnetic clasp is more important to me then a velcro case thus I'm willing to lose the wake up feature....thanks.
I tried this on my Tilt 2 and my magnetic case ans could not reproduce the issue. Maybe my magnets are too weak. Seem it may not be an issue for everyone.
True, the magnet issue may not be an issue for everyone - but it also applies if you open the keyboard just a tad while it's locked.
This was problematic for me when the phone was set to wake when the keyboard opens - it'll bypass the lock application (at least it did for me w/ my setup). Adding the reg value prevented me from accidentally unlocking the device when I'm trying to grab it out of the case - which while fumbling around you may tap the wrong part of the screen and can ignor an incoming call
Well, i have thought about this a little more. I am thinking, WHEN the heck do i grab my phone (while its sleeping) and pop the keyboard out to wake it up .... NEVER
I never slide the keyboard out unless there is a reason. ONLY when i am using the programs or get a notifacation. When i get a notifacation, the screen turns on, so ...
I guess i will be turning off the slide to wake after all, since i come to realize it is a useless feature to me anyways.
Hello, I wasn't able to find anything but does anyone know of any settings or a program that will lock the clock on the home screen. The phone unlocks in my holster or pocket and i always hit the clock and keep changing the time.
Random thought/stupid question. I assume that you are using the built in "lock" and not just turning the screen off correct? I know others have had problems with a magnetic latching case activating the "you pulled your stylus out sensor." It shouldn't be a problem with you keeping your phone in your pocket, but if it's just in the case when this happens try getting a case that uses something other than magnets as the catch.
Personally I love this little gem:
Smartlock
After you install it, you can find it under Settings > System. You can set it to lock the screen when you push the power button, when it fades out by itself, even when someone calls you. Very handy.
Also you can install this one here to make the lockscreen look alot better:
Dusk 6.5 lockscreen
I use both and I'm very happy with it
mhurg said:
Personally I love this little gem:
Smartlock
After you install it, you can find it under Settings > System. You can set it to lock the screen when you push the power button, when it fades out by itself, even when someone calls you. Very handy.
Also you can install this one here to make the lockscreen look alot better:
Dusk 6.5 lockscreen
I use both and I'm very happy with it
Click to expand...
Click to collapse
Thanks mhurg, I will try both of these.
brad_wp said:
Random thought/stupid question. I assume that you are using the built in "lock" and not just turning the screen off correct? I know others have had problems with a magnetic latching case activating the "you pulled your stylus out sensor." It shouldn't be a problem with you keeping your phone in your pocket, but if it's just in the case when this happens try getting a case that uses something other than magnets as the catch.
Click to expand...
Click to collapse
Actually i just wanted something in general. Just cuz the clock doesnt need to be changed all the time and i always hit it and it always goes into the clock settings or my alarm clock settings.
Good luck =)
the only way to change the behavior of this is to mod the lua file that controls it!! usually not fun or easy to do
torint said:
Hello, I wasn't able to find anything but does anyone know of any settings or a program that will lock the clock on the home screen. The phone unlocks in my holster or pocket and i always hit the clock and keep changing the time.
Click to expand...
Click to collapse
Create an unlock password and it will not unlock in your pocket or holster. Problem is that without a password, the phone will unlock when it thinks the keyboard is slid out. It can think this if 1) keyboard is slid out 2) phone come in close proximity with a magnet (some holsters have magnetic covers)
Have had my new Sprint TP2 for a couple of weeks now, really enjoying it. First "smartphone" for me, figured it's time to join the 21st century.
Biggest issue so far:
When putting the phone into a holster, it comes out of sleep mode (display comes on) - no, I'm not hitting the Power key when I do this. Something here doesnt seem right, but that's what happens...
At that point, on occasion the Dial key may get hit while in the holster (I can understand this, it's a hardware key) - which if the key kets tagged 2x while out of sleep-mode does a pocket dial to the last number called/received.
My original fix to this was to enable the password lock. While a PITA to unlock the phone every time, I'd rather do that than pocket dial. HOWEVER, when running an output only app (such as Google Maps or Navigation) the phone keeps going into lock mode and asking for the password - NOT a good situation while driving down the road...
So my question(s) are:
1. Is there a way to keep the phone from exiting sleep mode while entering a holster?
2. Is there a way to keep the phone from locking up and requesting a password during apps such as Navigation?
(I found this thread while searching, but still un-answered... [Thread 614599; vBulletin wont let me post the URL...)
Thanks in advance for any help!
Jim
This is a completely stock phone, no mods (so far...) other than a couple of applications added (Google Mobile apps, WSOP Poker).
The first question I have for you. Is the case/holder specific to HTC TP2 or is it generic and originally designed for a blackberry?
I ask this because no matter what blackberry case i've ever tried, they always bring my phone out of sleep mode. The reason is the magnet in the case that is designed to put the BB INTO sleep mode.
The case is specific for the Sprint TP2, from ThinkTouchPro2.com. It's the [HTC Touch Pro 2 Naztech Kaskade Vertical Pouch Case - Black], since I still cant post a url... well, I guess I can fake one:
thinktouchpro2.com/htc-touch-pro-2-cases-7462.html
It's definitely the magnet that's doing the trick. The phone comes out of sleep mode just as it starts to go into the case, so it's not a function of hitting any buttons.
Somehow I got into the habit of hitting the power button to put it to sleep before going into the holster, SOOOO thinking maybe it's a 2-way deal I tried leaving the phone awake and putting into the holster - no dice, still awake.
Test 2 was to put the phone into the holster, and then force to sleep. Removing it wakes the phone up, that I'm cool with. But I'm still left with the issue of pocket dialing whenever I use the holster...
Maybe the best solution would be to go to a non-magnetic holster?
Jim
that would be it.
The device uses a magnetic switch to tell it when you slide the keyboard out. So by pulling the device in/out of the case the magnet is triggering the switch leading the device to think you've slid out the keyboard and it should wake up.
I think Advanced config has an option to disable the device from waking up when the keyboard is slid open.
Actually I believe it's the magnet on the stylus, it doesn't have anything to do with the sliding function.
There was a solution for this somewhere around the forums.
If I'm not mistaken, removing the "wake up when keyboard is out" setting, solved the problem with cases that have a magnet.
j0shtalgia said:
Actually I believe it's the magnet on the stylus, it doesn't have anything to do with the sliding function.
Click to expand...
Click to collapse
my laptop uses a magnet to secure the screen when i close it and if i slide my tilt2 across where the magnet is with the stylus in or out, the device wakes up and goes into landscape for a second then switches back to portrait.
dont think the stylus magnet would cause it because the stylus is still in the device and the magnet is securing it in. I think it has another sensor in the stylus slot and just uses the magnet to suck it in because on older devices (wizard) the stylus would go loose, but then again those devices didn't wake when the stylus was removed.
fone_fanatic said:
my laptop uses a magnet to secure the screen when i close it and if i slide my tilt2 across where the magnet is with the stylus in or out, the device wakes up and goes into landscape for a second then switches back to portrait.
dont think the stylus magnet would cause it because the stylus is still in the device and the magnet is securing it in. I think it has another sensor in the stylus slot and just uses the magnet to suck it in because on older devices (wizard) the stylus would go loose, but then again those devices didn't wake when the stylus was removed.
Click to expand...
Click to collapse
Ah, I see. Interesting!
fone_fanatic said:
... if i slide my tilt2 across where the magnet is with the stylus in or out, the device wakes up and goes into landscape for a second then switches back to portrait.
Click to expand...
Click to collapse
BINGO, think we're onto it as I've seen this behavior as well.
I've poked around looking for this, but the closest I've found is the "Keyboard Sliding Sound", but there's not an option to kill the wake-up function. Can someone point me in the direction of the "Advanced Config"?
Jim
So why not use pocket sheild? It has a 15 sec timer on it, so if you put it in your holster and it "wakes up", after 15 seconds it will turn the phone off again if there isn't any action done on it. Use it to only turn on with the light sensor when you pull it out of you pocket or a finger swipe from top to bottom. Also, you can tell it what apps that it cannot go into sleep mode on.
aj48198 said:
So why not use pocket sheild?
Click to expand...
Click to collapse
That's actually on my list of apps to take a look at, but for a different reason. I'd still like it to not come on at all, as the pocket dial I made was well w/in the 15s timeout for PS.
Ok, so the search originally didnt work for me because I didnt realize it was the magnet causing the wake-up. Knowing that now, I found the registry change I need to make in another thread.
Now for the total noob quesion:
How do I get into the registry to edit it?
I gather Total Commander is the popular tool of choice, and now have that installed. But my searches keep coming up with various tweaks to MAKE in the registry, but not how to GET TO it. I was unable to find this in the TC docs, either...
Thanks for the patient assistance to a WM noob.
(tho I'm a .Net programmer, so not a complete ijit - unless you want to hold being a .Net programmer against me, which I really couldnt blame you for - but it beats the heck outta COBOL...)
Jim
PHM Registry Editor. I would have posted a link but I don't have enough posts to do so!! Just google it and it should come up I got mine off of freewareppc com
Pocket Sheild will not let anything happen what so ever. Unless you physically make it happen, it will do nothing but sit there at the unlock screen waiting for input. If nothing happens, the screen will go back into sleep mode. Check the website out, that should help you make your decision easier. You can change the timer to be 10 seconds as well but I think that is about as close as you can get beside turning the phone off!!
SailCO26 said:
Have had my new Sprint TP2 for a couple of weeks now, really enjoying it. First "smartphone" for me, figured it's time to join the 21st century.
Biggest issue so far:
When putting the phone into a holster, it comes out of sleep mode (display comes on) - no, I'm not hitting the Power key when I do this. Something here doesnt seem right, but that's what happens...
At that point, on occasion the Dial key may get hit while in the holster (I can understand this, it's a hardware key) - which if the key kets tagged 2x while out of sleep-mode does a pocket dial to the last number called/received.
My original fix to this was to enable the password lock. While a PITA to unlock the phone every time, I'd rather do that than pocket dial. HOWEVER, when running an output only app (such as Google Maps or Navigation) the phone keeps going into lock mode and asking for the password - NOT a good situation while driving down the road...
So my question(s) are:
1. Is there a way to keep the phone from exiting sleep mode while entering a holster?
2. Is there a way to keep the phone from locking up and requesting a password during apps such as Navigation?
(I found this thread while searching, but still un-answered... [Thread 614599; vBulletin wont let me post the URL...)
Thanks in advance for any help!
Jim
This is a completely stock phone, no mods (so far...) other than a couple of applications added (Google Mobile apps, WSOP Poker).
Click to expand...
Click to collapse
I think this is what you need:
1) this is a magnet holster issue -- FIX: from wmexpert touch-pro-2-tip-fix-cases-magnets-issue-registry-fix *attached Cab
2) To stop certain apps from locking automatically I use S2U2 *zip attached (Slide to Unlock) there is a list of applications that you can set not to lock when active. I use this for GPS navigation for example. showthread.php?t=527523
You can set a password with this or not as you wish. You'll like it.
Keep in mind that the one sideeffect of the magnet fix is that the phone will not automatically unlock on opening the keyboard. You have to hit the power button. Personally I don't have any problem with this.
aj48198 said:
Pocket Sheild will not let anything happen what so ever. Unless you physically make it happen, it will do nothing but sit there at the unlock screen waiting for input. If nothing happens, the screen will go back into sleep mode. Check the website out, that should help you make your decision easier. You can change the timer to be 10 seconds as well but I think that is about as close as you can get beside turning the phone off!!
Click to expand...
Click to collapse
well he is making it physically happen, but unintentionally. The magnet in the holster is waking the device up by making it think the keyboard has slid open, then the call button is being pressed against the case causing the device to place a call.
as i stated earlier, its best to disable wake-up when keyboard is slid out which is provided in a cab in the post right before this one.
Thanks aj and fwp, I think I've got it now.
Backed into a copy of the PHM RegEdit, and the slide fix worked great! No worries about the kb not waking the phone up, never used that function anyway.
Re the S2U2 app and preventing lock during some apps, does PocketShield also do this - or would I need to run both to keep GPS apps alive?
Thanks again!
Jim
fone_fanatic said:
well he is making it physically happen, but unintentionally. The magnet in the holster is waking the device up by making it think the keyboard has slid open, then the call button is being pressed against the case causing the device to place a call.
as i stated earlier, its best to disable wake-up when keyboard is slid out which is provided in a cab in the post right before this one.
Click to expand...
Click to collapse
I get that, and if the cab fixes the issue, thats great. What I was saying was that pocket sheild will not unlock at all, be it the keyboard slid open or the stylus came out, unless you program it to do so. I just tried to make it unlock by sliding the keyboard open and the only thing it did was go into landscape, still locked tho.
aj48198 said:
I get that, and if the cab fixes the issue, thats great. What I was saying was that pocket sheild will not unlock at all, be it the keyboard slid open or the stylus came out, unless you program it to do so. I just tried to make it unlock by sliding the keyboard open and the only thing it did was go into landscape, still locked tho.
Click to expand...
Click to collapse
ahh ok, not familiar with that app and thought you were saying that it would wait for an input (i.e. buttons pressed) for a set time, and if nothing happened then it would lock the device after a set time period.
SailCO26 said:
Thanks aj and fwp, I think I've got it now.
Backed into a copy of the PHM RegEdit, and the slide fix worked great! No worries about the kb not waking the phone up, never used that function anyway.
Re the S2U2 app and preventing lock during some apps, does PocketShield also do this - or would I need to run both to keep GPS apps alive?
Thanks again!
Jim
Click to expand...
Click to collapse
PS does do that (preventing lock during some apps) You just have to tell it when you are in the settings.
Thanks for all the great info! Have the phone "safe" now, but will be looking into PocketShield as the next app.
Jim
After a few months of use...
Notifications - opens every (ear listening) call, apparently my ear shape hits the top bar and the machine thinks I want to see notifications. Since the machine knows it's orientation - it there a way to prevent an ear-activated notification request when phone is vertical, or during a call?
Screen overlays - I bought some and added one, it got scratched and I peeled it off, and now I see at least 2 more! I think I see a glass that fills the frame, a smaller overlay, and another, smaller overlay. My basic thought is to keep peeling as they scratch. I want to make sure that if I get to 'glass' that I have not messed anything up - a decorative overlay (maybe with the browser size slider markings?) or a functional part of the touchscreen assembly. Is there anything I can mess up if I just keep peeling?
Thanks any and all!
Eep, I know know if I'd "keep peeling". If you feel like the screen itself is pulling back, I wouldn't do it. Resistive touchscreens do have 'layers' if you will...
Weird, in WinMo the prox sensor should work just fine - make sure it's enabled, the screen should turn off when your face gets close to the screen.
See this video for a demo.
Thanks for reply.
I'll look for cabs that may have affected the sensor (basically OEM update + a few goodies) as I can find no HTC/WinMo setting.
Were you saying you don't know if you'd... or now know?
Should there be a factory layer, exposed the user, that I should NOT peel off? ( I knew factory touchscreen at one time, they were soft overlays over CRT's.)
THX
tshephard said:
Thanks for reply.
I'll look for cabs that may have affected the sensor (basically OEM update + a few goodies) as I can find no HTC/WinMo setting.
Were you saying you don't know if you'd... or now know?
Should there be a factory layer, exposed the user, that I should NOT peel off? ( I knew factory touchscreen at one time, they were soft overlays over CRT's.)
THX
Click to expand...
Click to collapse
I have no idea, since I can't see what you're peeling. I've never completely disassembled one of these, but I've seen pics/videos. I also know a little bit about how touchscreens work (a little!) and I know there are layers that you should not be peeling back - without seeing a detailed pic or the device in person, I don't feel comfortable saying "yea, peel away" when you could be potentially damaging your phone.
OK - I removed all cabs, still not working, did reflash, same, did task 29 and reflashed, still not working.
Found something called 'Advanced Configuration', played with Light sensor settings, and now that works great, never knew it didn't before (auto did nothing).
Is there something similar for proximity settings? ( I would have thought a connector inside was loose - that's why I messed with light sensor - but that 'healed' and now I want to 'heal' Prox too!)
I peeled down to a full chrome-filling ?glass? layer that looks thick and just a bit wavy - still no Prox activity - and put a new screen saver on that - so that's not it.
Anyone know settings/cab/registry for Prox activity?
Still don't have proximity function... I'm thinking in call, object (ear) near HTC symbol should blank screen and also deny touch response.
I downloaded registry editor, and found some settings. Tried, well many combinations but no results.
I do find that some don't stay set - I change them, and reboot, and they go back to say "0". They are ProximityDetectStatus and ProximitySensorOn . I'm thinking (supposition) resistry settings are static - that they do not reflect machine activity, only editor or user's other software actually changing values to store - rather than indicators of current machine activty (button is now pressed, button is now un-pressed). Is my regedit process (change, close, boot) correct?
I'm left wondering - are registry settings reflective of current activity while regedit is open or even the moment it opened? IE, can I use regedit to show me if a switch is pressed?
Anyone else, help?
I'm on OE ROM, CHT and CHT editor
I always seems to be rotating and un-rotating my screen to get it to turn the way I want it to.
I had trouble with the Note1 with this and thought/hoped this new "smart rotation" camera checking you face position thing would help and I don't really think it helps at all.
It makes me especially nuts when I have my note 2 in Landscape mode in a holder in the car and my GPS software is shown the wrong way ...
I have also noticed that when using multiview that it gets more confusing.
Is this just more or are others not thrilled?
I would love to have a way to have a single button to make it rotate on demand and one then.
(NOT the don't rotate option that exists )
am I missing something basic?
THanks
Allen
I think its just the size of the phone, you try hold it and do stuff in one hand as you're used to, but because you have to hold it weird to get anything done, it rotates when you dont want it to. Only thing you can really do is disable autorotate. It would be good if you could adjust the threshold when to rotate, but of course on the other side of it, people will then say its too slow etc
Can't say this has been an issue for me. Seems to usually be in the correct orientation for what I want.
el_roy1985 said:
Can't say this has been an issue for me. Seems to usually be in the correct orientation for what I want.
Click to expand...
Click to collapse
IT will be interesting ot hear if I am the only one who sees thins as a problem or if lots of people have issues
akrasna said:
IT will be interesting ot hear if I am the only one who sees thins as a problem or if lots of people have issues
Click to expand...
Click to collapse
I know exactly what you mean. That's why I use display orientator. It places an rotate icon anywhere on your screen. So when you hold the phone in landscape. press the icon. and it stays locked in landscape.
When you're done in landscape, and hold your phone in portrait. press the rotate icon again, and it now returns to portrait.
perfect for me. No more flip floping rotating screen unless I want it to rotate.
el_roy1985 said:
Can't say this has been an issue for me. Seems to usually be in the correct orientation for what I want.
Click to expand...
Click to collapse
+1 never had an issue. As suggested there will be an app for that.
snoopycr said:
That's why I use display orientator. . No more flip floping rotating screen unless I want it to rotate.
Click to expand...
Click to collapse
Thanks - Display Orientator seems to be somewhat helpful.
He anyone seen thgouh any value added in this "smart rotate" in terms of using the camera to see where your face is? I have not found it helpful
I only ever had problems when changing between apps. I turned off the face checking orientation but it didn't conserve any more battery. On stock rom.
Nuts? Like hell, like Woods, like Savimbi. Seriously. I wondered no one had this issue unit I saw this topic. And that Smart Stay is a gimmick I think, I've no idea what it does basically!
I'll try that orientator app. Thanks.
Swyped from my GT-N7100
I don't use Smart Rotate but I do find the phone way too sensitive at turning to landscape. Sometimes the phone is only barely tipped towards that way when placing it down and it rotates.
Any way to adjust at what angle it turns?