No Phone/No Service - MDA III, XDA III, PDA2k, 9090 General

Hi all
I've got a problem regarding my Phone Service.
I woke up and my BA suddenly stopped blinking green on the Right led.
then i found out the icon saying no service.
i have been receiving service since i bought this phone,
this is just the first time it say something like this.
i tried everything upgrade/downgrade, changed sims and still it says that. "No Service"
i had put a sim PIN prompt so that i can detect if it's reading my sim.
it asks me for my pin but still... "No Service"
the one thing i noticed is that it doesnt scan anymore for services...
like the moving dots beside the antennae icon.
when i tried to bring out the option from the phone dialer it sometimes says "The phone is not ready. Wait 15 seconds and try again"
have anybody had this kind of problem? how did you solved it?

Never heard of this kind of problem...Try contacting your supplier.

It seems that this problem appears on coutries where 850Mhz GSM networks exist.
There some topics about this, but no definitive solution yet. Upgrading radio to 1.15.00 helps, but doesn't solve this.
Which country are you using your BA ? Do you know if those networks exists there ?
JP

JPBRA said:
It seems that this problem appears on coutries where 850Mhz GSM networks exist.
There some topics about this, but no definitive solution yet. Upgrading radio to 1.15.00 helps, but doesn't solve this.
Which country are you using your BA ? Do you know if those networks exists there ?
JP
Click to expand...
Click to collapse
Location: Philippines
Im using BA (O2 XDA2s)
R 1.15
G Variable (Been changing back and forth to 2003 and WM6)
D Variable (Been changing back and forth to 2003 and WM6)
Tried to change band on 2003 but to no avail.
Now i've upped again to WM6 and still no signal...
one thing has changed though...
it starts searching for service(running dots) but now it wont stop.

It seems that there are not 850Mhz or 1.900Mhz bands in Philippines, however there is 3G and uplink in 3G is usually 1.900Mhz.http://www.gsmworld.com/roaming/gsminfo/cou_ph.shtml
Which GSM bands are you using ? Did you try disabling 850 and 1.900 ?
JP

i did all the combinations... no go.
i've been searching for a program to diagnose the phone module, but cant find any.
i only wish someone in the technical side can help us with this.

Have you tried the sim car on another phone and see if you get service? Or try a sim card from a working phone to see if it works.

szfjcr said:
Have you tried the sim car on another phone and see if you get service? Or try a sim card from a working phone to see if it works.
Click to expand...
Click to collapse
i did.
i have my old trusty N6110 and N3210 for my backup.
i swapped sims but still only my BA wont cooperate.
i just want to know if there's a Test Mode for BAs.

SilverSamurai said:
i did all the combinations... no go.
i've been searching for a program to diagnose the phone module, but cant find any.
i only wish someone in the technical side can help us with this.
Click to expand...
Click to collapse
I've been searching other forums and found complaints and claims that this is a bug in the GSM radio. I've found complaints about this problem with BA, Himalaya, Atom and i-mate Jam (don't know the last two phones).
I've downgraded my BA to 1.42.00 (WM2003SE) and installed the following cab: http://forum.xda-developers.com/showthread.php?t=240080&page=2 (be careful, the .cab on the first page is a modified version).
After installed select band 900 / 1800 only that should solve the problem.
I've only been using it for less than 24 hours, but so far so good. It seems that this cab is only compatible with WM2003, but i haven't tried with WM5 or WM6.
If you want to try on your own risk go ahead. Please report the results you had.
JP

Thanks JP
will try it asap.

SilverSamurai said:
Thanks JP
will try it asap.
Click to expand...
Click to collapse
thanks JP
still doesnt work///

Mine did this, freaked me the bleeding hell out, it did.
I tried:
A hard reset
A few soft resets
Leaving the battery out for a while (was checking against a known good phone to make sure it wasn't my carrier)
After that, it started working again.

SilverSamurai said:
thanks JP
still doesnt work///
Click to expand...
Click to collapse
Silver,
Did you manage to run the .cab without errors ? Are you using WM6 ?
I can confirm to you that after using the BA with WM2003SE and this .cab for a week the problem has no longer appeared, so it seems solved on this OS anyway.
JP

Alternativa solution
Silver,
I've found this .cab in another thread. It seems to only enable bandswitch between 3G and GSM, but i thing it is worth a try in your case: http://commmgrpro.com/_wsn/page2.html
Here is the link for the cab: http://commmgrpro.com/db5/00454/commmgrpro.com/_download/BandSwitch.V2.4.2.CAB
JP

JPBRA said:
Silver,
I've found this .cab in another thread. It seems to only enable bandswitch between 3G and GSM, but i thing it is worth a try in your case: http://commmgrpro.com/_wsn/page2.html
Here is the link for the cab: http://commmgrpro.com/db5/00454/commmgrpro.com/_download/BandSwitch.V2.4.2.CAB
JP
Click to expand...
Click to collapse
Hey JP,
Thanks for all the help,
I tried every suggestions you said but still the phone aint working.
So i've decided to go look for a service center.
They said it was the mobo. *sigh*
I returned my item to where i bought it and exchanged it for a fee.
I got my semi-new BA again.
If ever that thing will happen... i know where to look.
Thanks again.

Silver, did you tried this ? This is what worked for me.
I don't think the service center will solve your problem, i'm convinced that this a bug on the radio.
JP
JPBRA said:
I've been searching other forums and found complaints and claims that this is a bug in the GSM radio. I've found complaints about this problem with BA, Himalaya, Atom and i-mate Jam (don't know the last two phones).
I've downgraded my BA to 1.42.00 (WM2003SE) and installed the following cab: http://forum.xda-developers.com/showthread.php?t=240080&page=2 (be careful, the .cab on the first page is a modified version).
After installed select band 900 / 1800 only that should solve the problem.
I've only been using it for less than 24 hours, but so far so good. It seems that this cab is only compatible with WM2003, but i haven't tried with WM5 or WM6.
If you want to try on your own risk go ahead. Please report the results you had.
JP
Click to expand...
Click to collapse

yup i did all possible fix.
i have my new BA now... (still Xda 2s)
it's working flawlessly.
thanks again JP.

Related

bad phone reception

i recently had too much spare time and tried installing a few new roms on my xda1 (wallaby). i used originally the 4.00.33. after the installs of windows mobile 2003 SE as well other beta versions only resulted in "autentification failures" and "red bands of death" i am now back at 4.00.33. i never chanced the radio software it has always been 4.21.
problem is that since i did this, my phone reception has gotten really bad. the phone no longer finds O2 as a network (i am in germany). only uses t-mobile network - but very poorly.
any idea what might have happen?
thx.
woody
anyone ???? :?
Woody said:
after the installs of windows mobile 2003 SE
Click to expand...
Click to collapse
Never had seen any WM2003 SE ROM. Neither for the XDA1 nor for the XDA II, so i don't belive this.....
Woody said:
problem is that since i did this, my phone reception has gotten really bad. the phone no longer finds O2 as a network (i am in germany). only uses t-mobile network - but very poorly.
any idea what might have happen?
Click to expand...
Click to collapse
Some ROMs set a device to 900/1900 band. Maybe this is your problem.
Enter Bootloader and set it back to 900/1800.
Only problem with this: Entering bootloader is the same as doing a hardreset. So all you data will be gone...
HTH
Stefan
hey, thanks so much. i set it to 900/1800 and everything's back to normal.
thanks, woody

Orange UK Only - What's Best Radio with WM6?

Could I please be so greedy as to have a Orange-UK only thread?
I am been reading and searching in earnest to see what other peoples experiences are with the various Radio ROMs. It seems most people are happy with 1.38.00.10, although seems to be a few instances of people sticking with older versions because of battery life/drop outs/data freezes. But I am unable to establish what other people are experiencing in the UK on Orange's network.
I am well familiar with the Radio ROM 1.38 + WM6 - good or bad? thread, but not many people in there commenting on Orange UK.
If you are on Orange UK, please can you share you experiences here?
My own experience has been thus.
Before upgrading to WM6, was on stock M3100, which had Radio 1.06 I beleive. This worked flawlessy with push email (Exch 2003), and never had any problems at all with it. This was also the case when I upgraded to LVSW 20070315, leaving Radio Rom as was.
Then I upgraded to Black 2.0 last week, and did the Radio to 1.34 with it. I didnt notice any problems at first, or rather didnt take much notice of not getting email notifications whilst at work. But on Friday I realised the Data connections were freezing.
I have tried going to 1.38.00.10, to 1.35, back to 1.06, even 1.27. Have also tried going back to LVSW 20070315, and am now on LVSW 20070408
I have narrowed it all down to the "common" problem in swicthing between GSM and 3G. At home I seem to be between 3 transmitters, and swicthing is common. Hence the problems I was having Friday.
The Excellent commmgrpro has helped here. Also Bandswitch.
Anyway, with Phone set to GSM only I have no problems. Odd thing is, driving to Sheffield and back yesterday (dont mention the football!!), with phoen set to Auto, I had no problems at all.
Yet at home, and at work, on auto the data connection freezes.
So.... Whats everyone else using on Orange?
i've been using rom 3.23.0.2 with radio 1.38.00.10 on a spv m3100. this device is been freezing like you described in your post, thing is, it's become unuseable since you have to reboot after the freeze and it happens almost continiously... driving me insane.
if anyone knows of a way how to get back wm5, i'd appreciate it!
freben
When I upgraded a while ago I was wondering the same thing. The only negatives re 1.38 at the time seemed to come from orange UK customers so I went for the 1.27 radio and it seems fine.
Have not yet stepped up further, and at the moment, see no reason to.
Especially as I can even get the H now and then. (If it aint broke...)
@Phil, I've "gone black" (v 2.0) with Radio 1.38.00.10 - only since Saturday, so it may be too early to tell. I've got a push email account with Mail2Web, which I don't tend to use that regularly - it's good for aggregating lots of mail stuff when I go away on business, but my data package ain't up to much (don't get me started ) so I only switch it on when required.
Since installing the new ROM/Radio/SPL, my M3100 seems to be much better than it was prior to the update. I've reinstalled all my apps (apart from PPCProfilesPRO - I'll do that tonight) and the phone seems really stable - no more random lockups when taking it off charge and only a couple of "slowdowns" when ending calls, or if Activesync'ing....can't really complain if I'm honest
I'll keep an eye on things - and maybe switch on the Exchange push email for a couple of days - and I'll post again if the situation changes.
Cheers,
Mark.
PS - Message for @freben; read MrVanx's guide on downgrading to WM5 - see THIS POST for details of how to find it.
MrVanx kindly provides a guide here: http://www.mrvanx.myzen.co.uk/hermes_guide/Downgrade/
Do please read very carefully before trying it
Yep...1.27 for me. No real radio problems to report.
Spent a couple of weeks with WMXL 2.0 and the last two weeks with Black 2.0. Both work fine with Orange with 3g (inc HSDPA) and voice. Direct push/web/pop email all fine.
One freeze this morning (first one in two weeks) but dont know if it was radio or os or an app?
Can;t compare with other radios but simply can say am happy with 1.27 (hence why I havent tried 1.38 etc)
Having no problems with set up in sig.
had the freezing with the stock set up.
Could/should we be more scientific here and use one of the many web2.0 survey sites to do a ROM/OS survey to find the right mix?
with a little effort we could then find the most reliable Radio ROM and view by Country/OS/carrier/etc.
just a suggestion..
Mark Crouch said:
but my data package ain't up to much (don't get me started ) so I only switch it on when required.
.
Click to expand...
Click to collapse
@Mark,
try Orange World Browsing, 8ukp for unlimited data access 24/7
Give O a call on 150 and then the billing option, 4
Orange World Browsing is what is what the O rep told me it was listed as. I think one of the key points is the cost, it’s 6.81 exc VAT or 8 inc VAT, that’s the way to check you have the right package.
And you need to be on a 35ukp per month tarif or more to get it.
apologies for off topic post!!
(I was told it was Orange World Unlimited)
unwired4 said:
(I was told it was Orange World Unlimited)
Click to expand...
Click to collapse
My bill confirms it as Orange World Browsing -although I too thought it was OWU.
Not sure if it is still so hard to get as it once was.
Sheep_Head - Well, I am definetely up for using a survey site - any recommendations?
I gave re-flashed my phone back to Black 2.0. Seems to be what most people are using here (IMHO). Have tried Radio 1.27, 1.38.00, and right back to 1.07.
With a totally clean device (i.e. straight after flashing), setting up the orangeinternet connection manually, the thing just wont connect to 3G. Only when I have Band set to GSM will it connect.
Jeez!
I am now in the process of going back to an Orange WM5 rom, to see if it makes any difference, (albeit the Romanian one, so will have to reset the internet connection).
Getting mildly frustrated now.
OK, I'm now back to Orange Radio version, and Orange WM5 -(Romanian!)
Entered Orange Internet settings. And have gained nothing. COnnects via GSM, but not via 3G.
Grrrrrr....
Spoke to Orange CS - no reported 3G problems in my area (well, what about me???).
What's the panel's opinion on sending a phone back to O with OliPro's bootloader on it? (well, and the Romanian Rom, but they prob wouldnt spot that).
I have insurance etc, so would get a replacement in advance....
philg2000 said:
OK, I'm now back to Orange Radio version, and Orange WM5 -(Romanian!)
Entered Orange Internet settings. And have gained nothing. COnnects via GSM, but not via 3G.
Grrrrrr....
Spoke to Orange CS - no reported 3G problems in my area (well, what about me???).
What's the panel's opinion on sending a phone back to O with OliPro's bootloader on it? (well, and the Romanian Rom, but they prob wouldnt spot that).
I have insurance etc, so would get a replacement in advance....
Click to expand...
Click to collapse
dude as a last ditch attempt can you try out flashing LVSWs latest ROM?? Make sure your settings are good and post the results?? (it wont take long)
Hey guys - mega useful thread.
I 'thought' I had solved all of my woes and was feeling bloody smug with myself as I thought I had managed to keep the stupid questions down to a minimum. After reading this obviously not .
I am running Black v2.0 (happily) and the rest of the handset is as per my sig block but I have removed spb pocketbooks and replaced it with shell. I thought it was all working correctly but I am suffering the same connectivity issues as yourself (gprs and not 3G).
Also - and I have read the threads but still not working (was going to try again after a re-re-re build I still have no VM notifications.
Anything I can help with or test let me know and I will do what I can.
Bezman.
wberesford said:
Also - and I have read the threads but still not working (was going to try again after a re-re-re build I still have no VM notifications.
Bezman.
Click to expand...
Click to collapse
I have just tested the voicemail fix again since my reinstall and the certificates cab plus installing the sms dll has always worked for me.
Are you having any specific issues with it?
CrazyC,
I am struggling with the whole copying over of the .dll file in the widows directory. Like I said I have done a search of the wiki on VM notifications etc and followed the directions. I have attempted using Activesync but keep getting a response saying that the destination is in use. I have tried directly on the handset (not expecting it to work) and it doesn't and finally I tried by using Total Commander. Still no joy. I will keep going with it though as I was thinking about building again from fresh anyways, and then attempting the vm notification from clean.
Gonna wait out for black v2.5 before I do that however.
Cheers for getting back to me though!
Bezman.
mrvanx said:
dude as a last ditch attempt can you try out flashing LVSWs latest ROM?? Make sure your settings are good and post the results?? (it wont take long)
Click to expand...
Click to collapse
Hmmm... I dont think that will achieve anything. I have had the latest LVSW ROM on there a while bad, with the same problem.
I'd really like to hear from anyone who has returned a flashed M3100 to Orange.
wberesford said:
CrazyC,
I am struggling with the whole copying over of the .dll file in the widows directory. Like I said I have done a search of the wiki on VM notifications etc and followed the directions.
Bezman.
Click to expand...
Click to collapse
The only way I have done this recently is using Resco File Explorer. You need to go into the Options menu to ensure you can see all files, then copy the sms_providers.dll into the \Windows directory. It warns you, but if you say yes it lets it happen. I have done this numerous times (have flashed my phone about 10 times recently!) without any problems!
wberesford said:
CrazyC,
I am struggling with the whole copying over of the .dll file in the widows directory. Like I said I have done a search of the wiki on VM notifications etc and followed the directions. I have attempted using Activesync but keep getting a response saying that the destination is in use. I have tried directly on the handset (not expecting it to work) and it doesn't and finally I tried by using Total Commander. Still no joy. I will keep going with it though as I was thinking about building again from fresh anyways, and then attempting the vm notification from clean.
Gonna wait out for black v2.5 before I do that however.
Cheers for getting back to me though!
Bezman.
Click to expand...
Click to collapse
First few times I did this, it just copied OK with the file explorer. Most recently tho it gave me the same error - so I went to the zip file on my ppc and told it to extract directly to the windows folder, said yes to overwrite and it did. Maybe worth a try. (install the certs first incase it makes a difference.)
SMS Providers CAB
To make my life easier I put the sms_providers.dll from WM5 into a CAB. To install make sure you've installed the sdk certificates (http://forum.xda-developers.com/attachment.php?attachmentid=35814&d=1174572298) first and then install this cab - a soft reset is requested at the end of installation and is required.
I've tested this on the latest LVSW ROM and it works perfectly, hopefully will overcome peoples issues with copying this file.

no incomming calls with wm6

Hi
I just upgraded to the official WM6
The strange thing is that everything is ok except that people are unable to call me on the phone. I tested the sim on another phone and it was ok, but just not on WM6. I can still sms or call out, but just no incomming calls. The radio is 1.46.00.11 I have a suspicion that this could be the problem.
Anyway is anyone else experiencing the same problem? And whats the EASIEST way to fix this? This is driving me nuts!?!?!?!
Thanks
o.. and i also tried unticking the HSDPA in control panel as well as setting it to gsm only. still no luck. Anyone?
luckydip said:
Hi
I just upgraded to the official WM6
The strange thing is that everything is ok except that people are unable to call me on the phone. I tested the sim on another phone and it was ok, but just not on WM6. I can still sms or call out, but just no incomming calls. The radio is 1.46.00.11 I have a suspicion that this could be the problem.
Anyway is anyone else experiencing the same problem? And whats the EASIEST way to fix this? This is driving me nuts!?!?!?!
Thanks
Click to expand...
Click to collapse
Just curious, when you say "except that people are unable to call me on the phone", what does that mean? Do they get your voicemail, or does the phone ring (from their perspective) but you do not hear it actually ringing?
Also, you say you upgraded to the official WM6 rom. Which official one? Be more specific pls. Is it the Australian rom?
which official Rom? the Dopod Rom?
i upgraded to the htc official cht rom 3.00.708.9
When others call me now they jump straight into voicemail.
I actually tried ringing myself with another phone and found something really interesting.....
The wm6 device woke up (just like normal when someone called me) and then instead of ringing, it disconnects itself from the gsm network, and then connects itself again. Strange....
mad mad mad mad mad soon...any help greatly appriciated
Same pb
Just replace your SIM CARD......
cmfund said:
Just replace your SIM CARD......
Click to expand...
Click to collapse
Do you mean remove and it and put it back in? or go buy another sim?
digitalfreeze said:
Do you mean remove and it and put it back in? or go buy another sim?
Click to expand...
Click to collapse
why don't you try first other sim by a friend??
or try to change the radio...
ervius said:
why don't you try first other sim by a friend??
or try to change the radio...
Click to expand...
Click to collapse
I'm not having any problems with mine, just curious about the solution.
I have same problem of 1.46.00.11 or 1.46.30.11
digitalfreeze said:
Do you mean remove and it and put it back in? or go buy another sim?
Click to expand...
Click to collapse
Buy a new sim or change Radio to 1.41.00.11
thanks cmfriend....i tested the phone out with another sim and it works. apparently my phone did not like my sim card. So replacing the sim fixed the problem.
I seem to remember that i left my old sim in the phone when i upgraded to wm6. Was I suposed to take it out when flashing??
Thanks for all your help guys
luckydip said:
thanks cmfriend....i tested the phone out with another sim and it works. apparently my phone did not like my sim card. So replacing the sim fixed the problem.
I seem to remember that i left my old sim in the phone when i upgraded to wm6. Was I suposed to take it out when flashing??
Thanks for all your help guys
Click to expand...
Click to collapse
As far as I know removing the sim during upgrade is not mandatory.
Is the sim of your friend from a different provider?
+1 ----> go back Rom Radio version 1.41.00.11
I have the same probleme : no incoming calls with 1.46.00.11 and 1.46.30.11
i have the same porblem the olny i seem t be able to fix it is to reboot/reset the device
Had a exactly the same problem (including the wake up/disconnect/reconnect GSM symptoms) with Vodafone NZ - reverting to radio version 1.38 was the only fix.
Antzzz said:
Had a exactly the same problem (including the wake up/disconnect/reconnect GSM symptoms) with Vodafone NZ - reverting to radio version 1.38 was the only fix.
Click to expand...
Click to collapse
same for me...but with Fido...no problem since reflashing with 1.38

LG KS20 NAVIGATION-BUG SOLVED(partially)

Guys,
For those that you bought the LG-KS20,propably you have noticed that there is a bug concerning voice announcements of Destinator or TOMTOM.
The voice announcements are cut off most of time.
But if you run in the background a windows media file (f.e an mp3 with no sound) you will see that the voice announcements are fully heard.
I was wondering if a kind developers can help us a bit and explain us why this is happening.
Best Regards
At least I made a small script to start the playback, then start TomTom and after closing TomTom stop the playback.
Maybe someone finds it useful.
Regards
Helmut
Thanks for you soft
i supposed it doesn't resolve the microphone probleme?
Is it possible to resolve the micro problem by the same kind of utilities?
Mouse007
I am the same one who has post post in the french <forummobile> which i was asking the sollution with the microphone.
The thing is that i test my phone yesterday through my office for 1 hour kai 15 minutes in GSM and 1 hour an 35 minutes with 3G.My Microphone did not turned off.
What can i say
moyse007 said:
Thanks for you soft
i supposed it doesn't resolve the microphone probleme?
Is it possible to resolve the micro problem by the same kind of utilities?
Click to expand...
Click to collapse
I'm sorry this has nothing to do with your microphone bug, but since I remember having similar problems with my old SDA smartphone, which were caused by bad hardware design, I would suggest to send your phone to the service center. Maybe some KS20 phones are having similar defects, too. I'm afraid there will be no software solution for this bug.
Regards
Helmut
Thanks a lot , but the problem affects all the ks20 when we're calling outside 3G reception
I'm sure the problem could be solved by the same kind of software ...
I had also this problem occasionally and my favorite PDA reseller / SFR (Vodafone France) representative explained that the same problem occured with Nokia 3G+ phone using SFR networks.
Actually the problem would not lie with LG nor the ROM but with the SFR 3G+ network when the phone is switching between 3G+ and GPRS. The solution - as recommended by Nokia France in an official note further to this problem - is actually simply to block the phone to GPRS (or 3G+ if always available) network (instead of letting it switch automatically) until SFR fixed their network problem. Of course, if blocked to GPRS, you will need to change this everytime you want to use 3G+.
giannis123 said:
Guys,
For those that you bought the LG-KS20,propably you have noticed that there is a bug concerning voice announcements of Destinator or TOMTOM.
The voice announcements are cut off most of time.
Click to expand...
Click to collapse
Maybe it cannot set the Audio buffer size properly... this bug involves not only Tomtom or Destinator but many other GPS navigation software too!!! This phone is FULL of BUGS!!!!! I've also try Miopap (iGo) software but it can't run in fullscreen mode because of top menu bar that cannot be hidden; then...this phone can't run any software using directDraw, so there's no 3D acceleration, no PointUI interface, no games, no iGo8...; I cannot use Skype and this due to the Qualcomm processor architecture...
hope a new rom is coming...now this phone (as is) sucks...
@gregnapola: Look into other posts - there IS a already a new row out for the KS20.
Greetings,
Pax
paxman said:
@gregnapola: Look into other posts - there IS a already a new row out for the KS20.
Greetings,
Pax
Click to expand...
Click to collapse
Thank you paxman, I've already seen it, but they're only SFR or German...I'm waiting for an English one at least(10e or better 10f)...so the only thing I can do now is playing (crying ) with my 10c italian ROM...
Here is the dutch version of the *Fix* for the LG KS20.
I also changed the dummy.asx a little. Instead of calling dummy.mp3 times 40. I've now made that script to call dummy.mp3 one time and then it will call dummy.asx again.
This means the loop is continuous instead of having it end after 40 times (20 hrs).
Hope it's useful.
I want to thank lindih for the original fix.
This is a cool looking phone.
Who is the maker of this phone? Quanta, the maker of O2 Atom?
CWKJ said:
This is a cool looking phone.
Who is the maker of this phone? Quanta, the maker of O2 Atom?
Click to expand...
Click to collapse
I don't know exactly where all the hardware pieces are from, but the phone is sold by LG and caries the LG logo. So I suspect it could be made by LG.
lindih said:
At least I made a small script to start the playback, then start TomTom and after closing TomTom stop the playback.
Maybe someone finds it useful.
Regards
Helmut
Click to expand...
Click to collapse
Hi I have downloaded the file and see the folders and files inside can you please confirm the steps required to install.
I assumed copying the files into the relevent folders on the device is this correct?. and where do i put the "MortScript-4.1-PPC.cab" file and what do i do with it? do i just install it?
Cheers
Darren (NEWBE)

Daxian T32 Phones

Okay so i ordered and received a Daxian T32 phone. This phone is great in all, no problems except for the wifi not working. It has it built in phone it has been disabled and only a wifi firmware update will enable it and whenever that will be out and i dont want to wait. Is there anyway to enable it? Tronicvasion were i got it from said that there might be a hack for it i guess. I was wondering do anyone have any info on this. Thanks.
thepindoctor said:
Okay so i ordered and received a Daxian T32 phone. This phone is great in all, no problems except for the wifi not working. It has it built in phone it has been disabled and only a wifi firmware update will enable it and whenever that will be out and i dont want to wait. Is there anyway to enable it? Tronicvasion were i got it from said that there might be a hack for it i guess. I was wondering do anyone have any info on this. Thanks.
Click to expand...
Click to collapse
I have heard that there is a hack for it, but haven't been able to find it anywhere. It's probably all over the Chinese forums...in Chinese....
daxian
hi folks!
i got an daxian x999 (which is the same as your t32) and i´m desperatly trying to dump the rom, because i want to modify or even replace it!
if u got to know somethings about hacks or tweaks, please tell me about it!
if someone can tweak it, maybe he even can dump the rom
thanx in advance
chuckbert
p.s.
to have wifi in my phone would be quite cool, too
Hello,
i have the x999+ with working wifi.
If it would be possible to read out my rom. could this be helpfull for you?
michael
rom!
sure it would be helpful... if it would be possible!
i´m trying to do this for a couple of days and i desperately need help from some kind of "rom-god"
so all u "rom-gods" reading this: gimme a hand, please!!!
I do have the 8 Gig mini sd card update for it, but nothing for the wifi yet. I dont even know how to get into the rom to enable it. As for the GPS chip it is over in europe from what i heard.
update
@thepindoctor
what kind of update is it?
just a .cab or something to flash the device?
It is just a cab file for the 8 gig memory card to work and i sure the wifi update will be the same way. I am having so much trouble with this phone rebooting at times and even hard resetting at times, im so glad i kept my wing, gave that to my wife but now im taking it back.
wifi
where did you get the information about the possible wifi-upgrade from?
i´m still very interested in it...
p.s.
i never experienced these kind of problems, though i keep playing around with my daxian to get the bootloader out! kinda strange...
T32 8 gig cab
thepindoctor said:
It is just a cab file for the 8 gig memory card to work and i sure the wifi update will be the same way. I am having so much trouble with this phone rebooting at times and even hard resetting at times, im so glad i kept my wing, gave that to my wife but now im taking it back.
Click to expand...
Click to collapse
Hi,
Were I can find this 8 gig card cab? In my device with wifi has just up to 2 gig.
Thank you in advance!
BR
SDHC update and WIFI
To enable SDHC, you can just look for it on the forum, it is on here several times...
Am not sure, but don't think that there will be an "update" for wifi...
The daxian x999/t32 doesn't have it, the daxian x999+/t32+ (which I have) does however...
So don't think you should get your hopes on for a "wifi update", if you would have a wifi antenna built-in, don't you think they would try to make it work from the beginning?
The + version has also been released a couple of months ago and if there would be such an update, I think they would've released it then.
is the sdhc hack a standard wm6 update for all phones? can't find a specific T32 one on here
I have the Wifi Hack App
Its a little dificult to do this:
1) get the pocket hack master (trial version)
http://store.handmark.com/p/910/Pocket_Hack_Master_for_Windows_Mobile_Pocket_PC
2) Shut off BLUETOOTH on 13%
3) Download http://www.freewarepocketpc.net/get-wmwifirouter-v0-89.html
WIFI router
4) on T32 (only T32) go to Settings - Connections - GPRS Stup, name it WIFI (on gprs internet)
5) save and restart t32. Run the wifi router and it will find your connection
And your using T32 wifi . thanks Rex909 the ghost hack master
i think i explained it right if i left something out let me know
That doesn't really make any sense. I've never been able to get Pocket Hackmaster to work with my T32. And how would one "shut off BLUETOOTH on 13%"??? And what would Hackmaster and the WiFi router have to do with each other?
any answer to the sdhc update whereabouts?
shambolic said:
any answer to the sdhc update whereabouts?
Click to expand...
Click to collapse
the cab that i use is SDHC.777 and is working, do a search with this name
problem with my daxian x999
Hello my friends
I really need your help. My phone starts to fail during booting and also if boot has problem reading some applications.
I made a hard reset as were explained before, blue screen...
So far so good, but still the some problem, I looks like some files are missing, shortcut invalid and my documents some times stay some no.
I am newbie with this but I think there is a problem with the rom.
thanks.
Have you used WMStorage 1.8, SPB MobileShell2.x or the TomTom Navigator with the phone before?
Until now i have found 4 cases of that behavior with the T32+ (including mine and yours)
I want to know what caused the malfunction. My phone is on the way back to me from china where it was repaired and i dont want it to break down again - so if you have any suspision please share it with me.
Other Software i used:
S2U2, S2P, S2V, and many more...
Draque:the_Plaque said:
Have you used WMStorage 1.8, SPB MobileShell2.x or the TomTom Navigator with the phone before?
Until now i have found 4 cases of that behavior with the T32+ (including mine and yours)
I want to know what caused the malfunction. My phone is on the way back to me from china where it was repaired and i dont want it to break down again - so if you have any suspision please share it with me.
Other Software i used:
S2U2, S2P, S2V, and many more...
Click to expand...
Click to collapse
****, YES !!! S2U2 and S2V,
Tomorrow, I'll send to china. Now the phone doesn't boot. Only shows windows mobile screen (blue). Nothing more
It's good to know which soft we have to avoid.
I didn't use WMStorage 1.8, SPB MobileShell2.x or the TomTom Navigator.
Only used S2UD and S2V.
Thanks for your info and share it!
personally i dont really think that s2u2 is responsible but maybe...
On the other Hand i had the following sw installed:
OmapClock - which failed at 204 MHZ
ActiveGCSync - a Google Calender Sync Application
GooSync - also a Google Calender Sync App
opera_wm5_ppc_865 - Browser
osmtracker
PCMKeyboard
Pointui 1.51a
SetVolume
SkypeForPocketPc
many GPS and Geocaching Apps
i also deleted the launcher startup link and the TouchFlo3D App.
btw: did s2u3 always behave right when you rotated the screen?
Good luck for your phone

Categories

Resources