Related
Has any one got MS Voice command to work on XDA Live... I can't get 1.5 to work and really don't want to spend more money to upgrade to 1.6 anyone know why it won't work. It gives Error at start up. Also does anyone know how to get the threaded sms off of my palm treo705 to put on my hermes?
chrisryn said:
Has any one got MS Voice command to work on XDA Live... I can't get 1.5 to work and really don't want to spend more money to upgrade to 1.6 anyone know why it won't work. It gives Error at start up. Also does anyone know how to get the threaded sms off of my palm treo705 to put on my hermes?
Click to expand...
Click to collapse
I had the same trouble with MS 1.5 in the AKU 3.3 upgrade and when I went to MS 1.6 it worked. MS 1.6 works fine in the XDA Live rom. I am afraid you may have to upgrade.
SK
I have installed it and It does activate VC but only through the device mic not through the headset. What is strange is that on my Wizard with WM6 VC1.6 worked perfectly straight away.
Can anyone post the Cyberon Voice Dial cab. I would like to try that with my Headset Thanks
Jules
Same here the headset doesn't work but thats no surprise really it NEVER works..
I have even tried the old hack and all it does is crash with an error..
VC 1.6 Required
As XDA-Live is a post AKU3 OS, you have to use VC 1.6 to have any of the capabilities. VC 1.5 only works up thru AKU2 ROMs.
I also am unable to get VC 1.6 to work with my headset, the XCSdM patch crashes on me (as mentioned in another post).
Dean
Cingular 8500
XDA-Live
Radio 1.35
Try This
Here everyone, this file got my bluetooth headset to work with VC 1.6 in Crossbow on my old wizard. Maybe it'll work for you, I haven't tried it on the Hermes.
Unfortunately, the hermes has something different in its MS bluetooth stack and that's why there are issues with MS VC..It is even listed on microsoft that there are issues with the bluetooth stack for hermes and a few other phones.
I tried the Widcomm stack and it seems to work well with MS VC and WM6 on the hermes, but be aware the Widcomm stack is still in developmental stages...so don't complain if you find issues with it...but it works for me
eagle 1 said:
Unfortunately, the hermes has something different in its MS bluetooth stack and that's why there are issues with MS VC..It is even listed on microsoft that there are issues with the bluetooth stack for hermes and a few other phones.
I tried the Widcomm stack and it seems to work well with MS VC and WM6 on the hermes, but be aware the Widcomm stack is still in developmental stages...so don't complain if you find issues with it...but it works for me
Click to expand...
Click to collapse
Can you activate VC through the headset though?
drbowden said:
As XDA-Live is a post AKU3 OS, you have to use VC 1.6 to have any of the capabilities. VC 1.5 only works up thru AKU2 ROMs.
I also am unable to get VC 1.6 to work with my headset, the XCSdM patch crashes on me (as mentioned in another post).
Dean
Cingular 8500
XDA-Live
Radio 1.35
Click to expand...
Click to collapse
I as well.... i guess it was a bad time to upgrade since i'm going on vacation tomorrow... oh well... atleast AD2P works great with WM6 and my SE 970
I installed VC1.6 and the BT Voice Command Hack by XCSdM
http://forum.xda-developers.com/showthread.php?t=283412
....my VC1.6 is working thru my Jawbone except for notifications......If I say "dial xxx-xxxx" it repeats the query back to me thru the jawbone!
8525 sim/cid unlock
XDALIVE w/ updates
Radio 1.34
Jawbone BT set
FU5 KONA said:
I installed VC1.6 and the BT Voice Command Hack by XCSdM
http://forum.xda-developers.com/showthread.php?t=283412
....my VC1.6 is working thru my Jawbone except for notifications......If I say "dial xxx-xxxx" it repeats the query back to me thru the jawbone!
8525 sim/cid unlock
XDALIVE w/ updates
Radio 1.34
Jawbone BT set
Click to expand...
Click to collapse
I have the .9f BT VC hack from xcsdm which isn't working...... i have never edit the registry before manually but willing to do it as it looks like the error of the program is that it isn't saving properly..... where can i find the values to change?
You shouldn't have to edit the registry with that fix. The fix is only for VC1.6, which is the only version of VC that is compatible with WM6. Think of it as when you updated to Windows 95, and your Windows 3.11 programs wouldn't all work - you're doing the same thing to your phone .
For the record, I'm running VC 1.6 on the Vanilla WM6 Rom, using the XCSdM patch only.
Heres my fix
Ok I got vc1.6 to sorta work the way I want it to. I upgraded to the widcomm stack and added the btfix hack listed in other thread. I can get vc1.6 to work with ptt button but not headset button. Hopefully this will be fixed with final development of widcomm. Haven't had a chance to check if all notifications come through bt or not.
I had to manually go in and ad a value to the reg in order to get the button on the BT to work as well as using the patch.....this is the setup.....
1. Install VC 1.6 (make sure it is in Main memory)
2. Download Bluetooth Voice Command 0.9f.cab
3. Download BTVoiceCommand.exe
4. Create the Folder \Program Files\Bluetooth Voice Command
5. Copy BTVoiceCommand.exe into this folder
6. Run .9f Hack
7. Go to newly created BT Voice Command config (in Programs) and tick off the check box "Enabled"
8. Set command duration to 30
9. Set or check that the following registry keys are set (I had to manually change Path to BTVoiceCommand.exe.)
10. HKLM\SOFTWARE\OEM\VoiceCommand\Path = "\Program Files\Bluetooth Voice Command\BTVoiceCommand.exe"
11. HKLM\SOFTWARE\OEM\VoiceCommand\VoiceCmdDuration = 30
12. HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\BTA GExtModule = "\Windows\btagext.dll"
a. (For reference: http://forum.xda-developers.com/show...=283412&page=7 )
13. *Go into the registry and set HKLM\SOFTWARE\OEM\VoiceCommand\ LaunchAPEnable to 1 (I wasn't sure if this was necessary...but it's working now)
14. Soft reset 8525
15. Delete Headset Pairing
16. Recreate Headset Pairing.
17. Set Side button to VoiceCommand
18. Reset Device
Thanks tp BKBrolier for posting this! The red section is what I had to manually add....once added I was flyin high!!!
Good news is coming
<WARNING: ELEVATED HOPES TO FOLLOW>
I have been working diligently on getting VC to actually WORK. The reg edits above will work with the 0.9f patch.
I am creating an new version of the BTAGEXT.DLL file that will work with VC the way it was intended. I'm getting close, but I'm hitting a couple difficult areas, so I'm not giving any ETA yet.
However, WHEN I'm finished, EVERYTHING will work as intended, commands, notifications... you name it. even caller id
XCSdM
Bravo, xcsdm! Look forward to the update. I have to be sure M$ VC 1.6 will work before I go to WM6.
Ben
VC 1.6 & WM6 Announce Incomming Calls
Thanks for all the efforts working to get VC 1.6 working through BT headsets. I am awaiting my new headset Plantronics 665. However, I have installed VC 1.6 and mainly want to use it for incoming voice notification of person ringing. This always worked out of the box before. I have ticked all the right boxes under settings (Ticked) Speak notifications through device speaker or wired headset only and (Ticked) Announce incomming calls.
The phone rings, vibrates but not VC announcements of incoming call. Thanks for taking the time to read and any ideas/suggestions welcome. Worked perfectly, well most of the time under 1.5?
Tom (Blackburn UK)
xcsdm BT VC 1.6 hack
I don't even get the shortcut in programs and btvoicecommand if I click it it just starts voice command.
xcsdm said:
<WARNING: ELEVATED HOPES TO FOLLOW>
I have been working diligently on getting VC to actually WORK. The reg edits above will work with the 0.9f patch.
I am creating an new version of the BTAGEXT.DLL file that will work with VC the way it was intended. I'm getting close, but I'm hitting a couple difficult areas, so I'm not giving any ETA yet.
However, WHEN I'm finished, EVERYTHING will work as intended, commands, notifications... you name it. even caller id
XCSdM
Click to expand...
Click to collapse
Thanks for the patch working good so far. Let me know when you get the new btagext.dll done i'll test it for you if need be. Keep up good work.
You are my hero man!!!
MS Voice Command is proving to be a real PIA to embedd into the Rom but We're probably better of not doing that anyway as tere are many who don't user or want it (yeah I know) and even a few who prefer Cyberon's Version....
xcsdm said:
<WARNING: ELEVATED HOPES TO FOLLOW>
I have been working diligently on getting VC to actually WORK. The reg edits above will work with the 0.9f patch.
I am creating an new version of the BTAGEXT.DLL file that will work with VC the way it was intended. I'm getting close, but I'm hitting a couple difficult areas, so I'm not giving any ETA yet.
However, WHEN I'm finished, EVERYTHING will work as intended, commands, notifications... you name it. even caller id
XCSdM
Click to expand...
Click to collapse
Hi guys,
First of all - I'm very glad to be here. On the last few days I red a couple of threads (a very lot of) but now I would like to ask two questions...
1.)
When I install MS Voice Command 1.6 (German Version) with AX3L_WM6_WWE_v2.0.8.1 Image, all is the voice stuff recognition stuff is working, but the announcments of incoming calls und mails are not. For sure I have activated this feature in settings dialog. There was a post around in this forum about the replacing of files (I did - but doesn't work)
By the way I have the newsest version of Voice Command but still not working. (is is a global wm6 issue with this product or only image related?)
2.)
Sometimes if I try to turn bluetooth on it doesn't... only after a warm reboot Bluetooth works. I know this problem from my old HP hx4700. Is this only a specific Image problem, or is this normal on today's images?
EDIT: Of course I red also the threads about this specific problem.. but before testing all cooked roms - is it in gerneral a problem with bluetooth turning on?
Thanks,
kind regards,
Pinocchios
sorry for my bad english - I'm austrian
I am having the same problem trying to get WM6 and VC 1.6 to announce incoming call.
Bluetooth and GPRS issue solved
Hi there,
My problem (described above) is solved now. I read an article about a memory leak in SPB Mobile Shell.. And yes, when I turn off the TODAY plugin (program starter, weather preview) I can turn on Bluetooth when a celular data connection is established.
It's reproduceable.. the today plugin consumes too much memory.
(the now screen turned on from mobile shell will function as usual)
I am not able to install MS Voice command 1.6. It gives an error during the installation concerning the certificates etc... The install is then terminated. What should I do?
Thanks
I still can't get voice command 1.6 to announce incoming call on any trinity wm6 rom. not on the bluetooth headset and not on the device speaker. did you succeed?
No - I can't get it working.
seems as microsoft have to develop this product for wm6
Hi there,
I have the v1.6.17919 on the earlys Ger WM6 bepe rom in use and I'am surprice to tell you that the incomming calls where brought to me over the internal speaker!!!! Thats a cool feature, to here the name of the person that is calling!!!
Lalle
Hi
really?? I have tried bepe's newest rom, but there's an issue with active sync.. the exchange server sync get stuck and after an reboot of the mobile device, windows doesn't continue to boot - I just see windows mobile screen.
.. with other images is no problem..
.. another question... VOIP is working in bepe's rom?
on AX3L I can't get it working. there is only noise coming from the internal speaker.
regards,
Pinocchios
I installed MS Voice Command for a little while on WM6 (official release) but I found it to be pretty useless, don't know if it was because it was WM6 as I haven't used MS Voice Command on WM5. Anyway, switched back to Cyberon Voice Commander for the mean time, maybe when microsoft release a new version I will look at trying it again.
I have installed Cyberon Voice Speed Dial on my i780, which basically works OK, but I can't activate voice dial panel when pressing voice dial button on my BT headset. It always activates phone pad instead. I've googled around and found some reghack suggestions, but non of these work. I've also upgraded CVSD to ver. 1.2 build 70917, using cab downloaded from cyberon.com.tw - again, no luck.
Anyone has been successful tackling this problem? Any help appreciated.
I am having same issues with microsoft voice command, would like to hear an answer too
ofird said:
I am having same issues with microsoft voice command, would like to hear an answer too
Click to expand...
Click to collapse
How come?
It's documented that you won't get the output from MS Voice Commander to your BT headset,
but I have no problems in activating the voice command through the headset -
Dialing or any other command.
No special tweaks needed.
eranro said:
but I have no problems in activating the voice command through the headset -
Dialing or any other command.
No special tweaks needed.
Click to expand...
Click to collapse
I didn't have that issue either with HTC Kaiser. It's only happening on Samsung i780, and I'm desperately looking for solution. No luck so far...
eva_d said:
I didn't have that issue either with HTC Kaiser. It's only happening on Samsung i780, and I'm desperately looking for solution. No luck so far...
Click to expand...
Click to collapse
I don't know about CVSD, but have you tried Micrsoft Voice commander?
I don't use it now, but on my Samsung i780 I don't remember experiencing the problems "ofird" describes.
Except for not getting the speaker output to my headset, which is a documented "feature" of M$VC with Samsung smartphones...
eranro said:
I don't know about CVSD, but have you tried Micrsoft Voice commander?
Click to expand...
Click to collapse
Unfortunately MSVC doesn't suit me, as it doesn't recognise non-english names very well, and these are most of my contacts. This is why I prefer Cyberon VSD where I can train my own voice tags to most contacted numbers.
OK, so it's for all Windows Mobile compatible devices, but how cool (with varying degree of usefulness) would voice commands be on the Touch HD!
I just saw this: http://uk.youtube.com/watch?v=uLAbwT521Fs
and the product is here: http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/about-voice-command.mspx
SingaporeAirlines said:
OK, so it's for all Windows Mobile compatible devices, but how cool (with varying degree of usefulness) would voice commands be on the Touch HD!
I just saw this: http://uk.youtube.com/watch?v=uLAbwT521Fs
and the product is here: http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/about-voice-command.mspx
Click to expand...
Click to collapse
Hopefully I'm receiving my HD this morning. I'll load MS Voice Command 1.6 and see how it performs then report back. I find it a must have app.
When I'm in my car using TomTom, it is great to use my BT headset button to talk to my Trinity. I can tell it to "start" TomTom, email and explorer and any other apps in the Start Menu. For example, I say "call" Joe Black, it then asks if I want to call Joe Black at home, office, mobile. I say "mobile " my phone then dials Joe Black on his mobile phone without touching the phone. There is no need to program voice tags for MS Voice Command, it takes the names directly from your contact database. There is a special hack file to get my BT working with MS voice, I hope it works on my HD as well.
version 2.5 is on the Diamond and my 810 had it as well so i would imagine it's on the HD
2unique said:
version 2.5 is on the Diamond and my 810 had it as well so i would imagine it's on the HD
Click to expand...
Click to collapse
I didn't know that Microsoft Voice Command has ever come pre-installed on a WM Device....... Am I Wrong??
seal said:
I didn't know that Microsoft Voice Command has ever come pre-installed on a WM Device....... Am I Wrong??
Click to expand...
Click to collapse
AFAIK the latest "Microsoft Voice Command" is version 1.6, which I have. I only bought it a month ago.
seal said:
I didn't know that Microsoft Voice Command has ever come pre-installed on a WM Device....... Am I Wrong??
Click to expand...
Click to collapse
Hi.
My HTC Wizard has it for sure. And iPAQ 514 also has it in standard.
Can someone please confirm if MS Voice Command is installed on the Touch HD ......and what version.
Thanks.
Beards
voice command is not installed.
sail0r said:
Hi.
My HTC Wizard has it for sure. And iPAQ 514 also has it in standard.
Click to expand...
Click to collapse
mine didn't have it...
my bad, we get the cyberon version here in Thailand with the Diamond as standard but MS works on the diamond too
MS Voice Command only ships on devices if the Operator requests it.
AT&T did not include Voice Command on the Tilt until their WM6.1 ROM was released, but it will ship from the start on the HTC Fuze. When I purchased an unlocked US 3G Diamond, it also had Voice Command on it.
Just for the record, nobody should ask for/post their CAB installer for Voice Command since it would technically be warez. On the devices that ship with it preloaded, it comes in the form of an OEM package, not a CAB file.
So I really would like to know if MS voice command 1.6 works on the touch hd. especially with the bluetooth headset. Can anyone confirm that this works? Matterhorn?
Thanks.
I have installed it on my HD and it works fine via a long key press on the left virtual button. It cooperates nicely with my Jabra handsfree also.
Zusan said:
So I really would like to know if MS voice command 1.6 works on the touch hd. especially with the bluetooth headset. Can anyone confirm that this works? Matterhorn?
Thanks.
Click to expand...
Click to collapse
I can confirm that MS Voice Command 1.6 is working great on my HD. It did give some kind of error message when it installed but just ignore it. It must be installed to internal memory...supposedly. It is working great with my JawBoneII BT headset. Long press activates voice command. You'll need to go into the buttons settings on your HD and set the long press of the "Call" button to VoiceCommand.
On my Trinity I had a hack file to get the BT headset working with Voice Command. I needed BTtools to get the Activesync working over BT. I never could get GPS to work on more than one app at once. These are all problems of the past! The HD is taking everything that I throw at it...so far.
How do you initiate a voice command without a headset?
MS Voice Command works
I have MS VC on my HD and it works great. I had purchased it a while back. I believe 1.6 is the latest version. I have it working with my bluetooth in my car. I have an Alpine radio. It has a Bluetooth connect that when you activate blue tooth, it announces over the speakers in my car. Its very nice. I remapped MS VC to my Volume control using AE Button Plus. Both are great programs and im loving my HD more every day.
SingaporeAirlines said:
How do you initiate a voice command without a headset?
Click to expand...
Click to collapse
Look at my post above
Go to settings/buttons and change the "long-press" to MS VoiceCommand. It is the answer button.
It is really fantastic to see Voice Command 1.6 perform on the HD, way better than the first versions I used in the past. If only there would be a way to make VC understand that my music collection is mostly English titles - they sound really funny in the German VC version
how much does voice commander 1.6 cost?
jackthekayman said:
how much does voice commander 1.6 cost?
Click to expand...
Click to collapse
I believe it's around $25 USD online, and worth every penny.
Greetings,
I ahve a HTC Touch Pro 2 T7373, Windows 6.1 and have installed Cyberon Voice Dialer V 1.2 Build 061226.
I can activate voice command through the phone, but when connected via bluetooth to the Parrot Car Kit, i can not activate through voice command to dial a number.
Any assistance would be greatly appreciated.
Regards kii
kii said:
Greetings,
I ahve a HTC Touch Pro 2 T7373, Windows 6.1 and have installed Cyberon Voice Dialer V 1.2 Build 061226.
I can activate voice command through the phone, but when connected via bluetooth to the Parrot Car Kit, i can not activate through voice command to dial a number.
Any assistance would be greatly appreciated.
Regards kii
Click to expand...
Click to collapse
I tell you what I understood.
Cyberon is based on Microsoft Bluetooth driver.
TP2 uses another driver (Maybe it's called Broadcom).
Ok.
So, if you want to solve this problem you need to:
- ask cyberon to develop theyr application on Broadcom drivers..
- ask HTC to change BT driver..
I think it is obvious that none of them will help us.
So we payed about 700€ for a mobile phone that can't do a basic function.
Even my old Universal could use voice dialer..
Voice Command can dial as well and works over bluetooth. What else does Cyberon Voice Dialer do that VC doesn't?
jmmmmm said:
Voice Command can dial as well and works over bluetooth. What else does Cyberon Voice Dialer do that VC doesn't?
Click to expand...
Click to collapse
Well.. Can Voice Command understand italian language?
Tip: watch the flag in my post..
DJ Palmis said:
Well.. Can Voice Command understand italian language?
Tip: watch the flag in my post..
Click to expand...
Click to collapse
Whooo down boy... you are not the original poster and the original poster didnt mention being or speaking Italian.
DJ Palmis said:
I tell you what I understood.
Cyberon is based on Microsoft Bluetooth driver.
TP2 uses another driver (Maybe it's called Broadcom).
Ok.
So, if you want to solve this problem you need to:
- ask cyberon to develop theyr application on Broadcom drivers..
- ask HTC to change BT driver..
I think it is obvious that none of them will help us.
So we payed about 700€ for a mobile phone that can't do a basic function.
Even my old Universal could use voice dialer..
Click to expand...
Click to collapse
Thanks for the quick response and clarification. I agree that neither HTC noe Cyberon will bother to rectify the problem.
Cheers
i also prefer cyberon voice commander to MSVC. Cyberon is *much* better at recognizing names (particularly asian names) and it gives me the option to have it read my sms's when i want to, not just when it comes in. and it also has voice tagging for literally everything it covers and digit voice training, which MSVC lacked last i checked.
anyway, it's not the most elegant solution, but what i've done to get around it is to install both. i have MSVC set only to start up programs (disabled the rest) and use it to start up cyberon, after which i use cyberon.
like i said, not the best solution, but it's the only one working for me at this point in time.
somynex said:
like i said, not the best solution, but it's the only one working for me at this point in time.
Click to expand...
Click to collapse
That's a good workaround, but, as you said.. Not too easy.
Thank you anyway.