Help:How to dump wm6 rom of hx2000 - Upgrading, Modifying and Unlocking

Hi all!
This is my first post here.
I have upgraded my 2415 to wm6 (PDAVIET version) and it is grade!
But I still want to make some modification of it, to delete some build-in tools, to get Chinese support and ....... I want to cook my own rom base on this rom.
However, I can not dump a full pdaviet rom folder when I used all the tools I can find in internet.
The command I used:
"prepare_imgfs nk.nbf"----------->break the nk.nbf file into two BIN files
"viewimgfs imgfs_raw_data.bin"------------>can not finish the procedure and pop up the error (Unknown header type and some address issues)
I suspect that some passwords or others should be add after the command of "prepare_imgfs nk.nbf".
Anyone can help me to fix it?

Hello,
You need first to convert your nbf file to nba with HP2000_tool.
Tutorial here :
http://forum.xda-developers.com/showthread.php?t=330034
Laurent

Thanks a lot !
Actually,I have followed that tutorial and downloaded the tools, but also failed.
Now, with the help of you lucky man, I did it.

Related

Has the XDA2i Extended Rom Been Exposed Yet?

Has any one managed to expose the extended rom on the XDA2i for custom instalation on boot.
Also Vodafone Instalation cab works fine on XDA2i with all functions working.
I'm trying to do the same thing - has anyone managed to expose the extended rom on the XDA2i?
It was dumped a long time ago. The 3900 build of Bluetooth drivers comes from there.
Qtek 2020i problem
hi mamaich
I have bought Qtek 2020i before 2 days, can you please direct me how to unlock my extended rom? I will be very thankful to you if you help me in this issue
note: I tried the extended rom unlocker that was prepared for Himalaya and the one for Blueangel too and didn't show even my extended rom folder after soft reseting.
Re: Qtek 2020i problem
I don' have 2020i, so I cannot help with extrom unlocking.
Is there an Extended Rom Unlock Utility for the 2i?
We are desparately in need of a way to unlock the extended ROM of the XDA2i. The reason for this is that our application--for whatever reason--is not compatible with the 3900 bluetooth build, but IS compatible with earlier builds such as that found on the XDA2s.
If it is true that the ROM has been unlocked to gain the 3900 bluetooth build--then can someone please post a link to the way in which this was done and any utilities or software used to do it?!
Re: Is there an Extended Rom Unlock Utility for the 2i?
You can manually edit extended ROM image (NBF file) with extended ROM editor tool (I'don't remember its exact name, look into WiKi), delete CAB file and reflash. But I don't think that downgrading to build 3501 would help. You'd better fix your app.
I've tried this, used ER2003Edit_1_4_26. I have the nbf but it is telling me I can't open them because the password is incorrect. I have looked around quite a bit for a solution but have found none.
Is there a password which will allow one to gain entry to (ie edit and repackage) such that I can truly update the extended ROM of an XDA2i?
ERROR, ERROR ERROR
Sorry for my english
Since April i search a way to edit ExtRom on Qtek 2020i, but it seems that is to complicate for developers.
Status at this day
1) You can see extrom and by this way copy and save cab on other place. To do that you must reset just after steep 1 of hard reset and use your explorer. Other way, with your explorer, go to windows folder and simply run LoadVDisk.exe
2) You can't write into ExtRom
3) You can't edit rom with actuals tools (ER Edit, Dump ....). Passwords is unknow and i think memory adresses are differents
4) Also If you can't write in your Storage, because looked after used differents tools proposed by many peoples who know, to unlock your Extrom, flashing rom do not return Storage in normal status. It's my case and somebody with apparent good intention, but totaly incompetent, can you push to make an fatal error, thank's to all.
I'm am ungry when i read some absurbity (exemple in this forum). When we don't know, we must no speak
so is it impossible now to get the Srorage folder as before, I have this problem now in my 2020i, I cannot write into Storage HELPPPPPPPPP
It's exactly tha i said
DON'T USE FOR MOMENT ANY EXISTANT TOOLS TO UNLOK QTEK 2020I
Any progress in unlocking the extended ROM on XDA 2i anyone?
if somebody can povide me with valid source code I may try converting it for xdaIIi, I have one source now but missing some header files which I couldnt find like Pwinuser.h
I have free time these days, and I am sure that we have many good people here but maybe we need more effort, so let us share our experience on what we found so far, and try to solve this problem ASAP, what makes me more angrey these days is the Storage which also cannot be unlocked back...
so common guys, let's rock it out!
Hi
About storage i have unlocked mine. This lock Storage was appear after trying to unlock Extrom. Pls read this
http://forum.xda-developers.com/viewtopic.php?t=23154&highlight=
For me Storage locked is finish with this simple action.
For Extrom what header do you need ?
I put here registry and files extract from 2020i about Extrom that is nammed VDISK and use VDISK.dll. We can see ExtRom without reset to run LoadVdisk.lnk or .exe directly
I have also original installation of French ROM 1.11.02, Extended 1.11.115 and Radio 1.02 FRE.
Thank's for your support
I need the C header file not the registry information, read my reply to your post about the Storage, I explained there how does these things work out, at least for the 2020i a far as I could find out, if there is anyone on this forum who can add something or correct me, that would be nice, because we want all to work together to solve this problem ASAP.
I am now trying to find out the functions indside the dll file and find out how do they work, then I will try the password that is provided in this forum to unlock the extended rom. what happens to the Storage is that the old program has 2 parts: lock and unlock, when we tried to unlock, nothing happened because the password and device type was wrong, and when we tried to lock, the code didnt check the device name niether the password and directly locked the diskonchip drive which is in our case the Storage folder. I read the source code and this is what I understood, so I am trying to modify it to unlock one of these folders, and since it was not put completely on the FTP (missing header files) I couldnt compile the code!
EMU, i write respons about Storage in http://forum.xda-developers.com/viewtopic.php?t=23154&highlight=
Let me know if it's ok for you
Désolate for header file, i don't have it
I have an XDA2i. Is there any way I can provide the header files you're talking about? If so, please provide detailed instructions for how I would do it.
Hi Guys,
there is already a new version of ER2003Edit (not published yet!!!) which can open .nbf files of Qtek 2020i. The only problem is with checksum calculation. I am using Itsme's Perl script, but it has a problem calculating the checksum and he didn't have time to fix it yet.
Anyone else...?
Hi EMU
What are the status of your trying to unlol Extrom. Can we help you ?
softworkz said:
Hi Guys,
there is already a new version of ER2003Edit (not published yet!!!) which can open .nbf files of Qtek 2020i. The only problem is with checksum calculation. I am using Itsme's Perl script, but it has a problem calculating the checksum and he didn't have time to fix it yet.
Anyone else...?
Click to expand...
Click to collapse
PLs if it has been updated then let us know we are eagerly waiting for it.
thx a lot
jeet

AtomLife ROMs extract! Help pls

Hi all,
I am trying to port the mediaplus from AtomLife ROMs which has the second version of mediaplus with icons in circle.
I was successfull in extracting the imgfs.bin but there is onemore file ExROM.img which is not giving up.
I Tried
1. winimage
2. extended drive creator
3. scooter kitchen tools
but i am not able to look into the contents, it has the required _QHiddenPartition directory which has all the theme and image files for FMRadio/Mediaplus and Equaliser.
can anybody help me .
regards
Shreedhara
Mediaplus is very tricky..the images are in Ext ROM..but the links to executables are somewhere from the XIP section..any way keep working
Well
I don't think u understand my problem.
I was able to run the Mediaplus(v1.0) app on my Eten M700 earlier when I had WM5 on my eten.
But after I changed it to WM6, I want something new and hence I am trying to get the Atom Life Mediaplus (v2.0), which is better looking than the earlier one.
But SInce the latest ROM's from O2 have differenct format
It contains
lot of asm.mbss files (Motherboard assembly ) and FLASH.DIO and ExROM.img
with XLDR.nb and EBoot.nb0 files also.
But that Extended rom is hardnut to crack, it does not open at all for any tools we have here.
That'swhy I asked for help, so that I can extract it.

Samsung i780 kitchen - release 0.1 BETA

DEPRECATED VERSION: USE 0.2 BETA INSTEAD
PLEASE NOTICE THAT THIS KITCHEN IS A VERY EARLY BETA AS IT HAS NOT BEEN DEEPLY TESTED
*** USE IT AT YOUR OWN RISK! I ASSUME NO RESPONSIBILITY! ***
Hi guys,
after many days of testing I'm releasing my kitchen for i780.
It is very basic: no gui, only batch Windows scripts.
What you can do with this kitchen:
A) Convert your Part02.raw dumped rom to bin flashable PDA rom
B) Create a dump folder to cook your own rom and recreate a bin flashable PDA file.
Please notice that there's no tool included to edit, add or delete modules and files from rom dump.
You must use one of the tools available here in forum to do this or do this by hand.
Donwload the zip file and extract everything.
READ CAREFULLY THE README FILE IN THE ZIP ARCHIVE
This file explains how the procedures work and what you need.
PLEASE TEST THIS KITCHEN AND REPORT YOUR RESULTS
I thank chaimd for his bintonb0 tool, tadzio for his tools and Juggler for conv3 sourcecode.
I also thank Topogigi for his original procedure.
I modified conv3 tool to make it work with i780 rom files and made split and merge tools.
If you want to try this kitchen, I thank you!
[FONT=&quot]If any guru in the forum wants to make a gui for this kitchen or insert tools for module, file and registry editing (like the ones you can find in other kitchens), it would be appreciated.[/FONT]
Issue 1: it seems there's a problem with Part02.raw conversion. It screws up connection settings. Problem is being investigated.
[Partial solution]: it seems that this problem is due to both size and language: I used an English rom to convert an Italian Part02.raw.
Using an Italian rom seems to solve the problem. But you must check the new rom size: if it's too big it gets cut down and it doesn't work.
Amazing Thank you very much!
inertiax3 said:
Amazing Thank you very much!
Click to expand...
Click to collapse
wheres the download link ?
Everything's online now!
Have a good time and let me know!
Thank you very much
And is it possible to use it for create a .bin flashable phone rom ?
sorry for a noobie question.
with this kitchen, can i cook a wm6.1 by replace all the wm6 files with wm6.1 files?
Thanks famucs i have tried your procedure.
It's all ok but i nedd to split i780_XIHA7_Rev12.img in tree part loader, pda and phone.
Can You help me?
sorry for my terrible english.
tatoone said:
Thanks famucs i have tried your procedure.
It's all ok but i nedd to split i780_XIHA7_Rev12.img in tree part loader, pda and phone.
Can You help me?
sorry for my terrible english.
Click to expand...
Click to collapse
thats easy .. heres how to do it
fire up mirage on ur pc and chose the eboot+phone+pda option and select ur file ..
then dont connect the samsung to pc.. instead use file explorer on pc nd go to c and copy the three files to some other folder.. cancel the mirage on pc then
ruffruff said:
sorry for a noobie question.
with this kitchen, can i cook a wm6.1 by replace all the wm6 files with wm6.1 files?
Click to expand...
Click to collapse
i was thinking the same thing.. ? if you try let me know too !
zohaer21 said:
i was thinking the same thing.. ? if you try let me know too !
Click to expand...
Click to collapse
I love your footer about the 8502 being a mistake. I also own one. what a dissappointing and relatively useless machine it is, and I can't find a buyer...
I have tried with dump of HC1 italian but I have more problems.
The more little is the desappear of office folder but most important is the deseppear of remote connection e wifi connection.
tatoone said:
I have tried with dump of HC1 italian but I have more problems.
The more little is the desappear of office folder but most important is the deseppear of remote connection e wifi connection.
Click to expand...
Click to collapse
That's interesting:
can you tell me exactly what rom did you use as a base?
ruffruff said:
sorry for a noobie question.
with this kitchen, can i cook a wm6.1 by replace all the wm6 files with wm6.1 files?
Click to expand...
Click to collapse
Don't think you can.
In another thread, people were talking about a xip part needed to switch from wm6 to wm6.1
famusc said:
That's interesting:
can you tell me exactly what rom did you use as a base?
Click to expand...
Click to collapse
I have the the loader and the phone of i780DXHC4 english.
I have processed a dump of italian rom version i780XIHC1 with yor software.
Peraphs the dump of italian rom is broken??
tatoone said:
I have the the loader and the phone of i780DXHC4 english.
I have processed a dump of italian rom version i780XIHC1 with yor software.
Peraphs the dump of italian rom is broken??
Click to expand...
Click to collapse
No, I think there's a problem with payload update.
Thanks i will try it
where to get the part02.raw from ? i wanna work with dh4 rom ?
thanks
Convert Part02.raw to .bin
Hello famusc,
Thanks for your effort to create a kitchen for the i780! I wanted to create a backup of my Dutch i780-rom (PDA: i780XKHA3) and I managed to dump part00.raw, part01.raw and part02.raw.
Now I wanted to convert part02.raw to a flashable .bin file so I could reflash this Dutch rom if I want to go back to factory defaults, but the warnings make me a bit scary to test the .bin I created, so I wanted to ask some questions first:
-The .bin has to be as large as possible, I have the i780pda_WWE_test2.bin which is 78.512 kB and my Part02.raw is 79.104 kB. The .bin I get when the conversion is finished has a size of 78.512 kB. Does this mean some data of my original dump is lost? (I kinda understand your conversion tool replaces the part02.raw file of a flashable .bin rom with another part02.raw which in my case is the Dutch part., but is all the information still in it?)
-My second question is if it is a problem if I used an English .bin with a Dutch .raw?
If you could please anwer my questions I would be very happy, because I have seen some requests for Dutch i780 roms and it might come in handy for other languages, because in this rom Windows Live Messenger is included (and obviously working). So maybe someone can extract it.
If you are interested I could upload the .raw files i have dumped and maybe you or someone else can create a flashable Dutch rom from it (or extract WLM if it is needed).
Grtz,
Manchurian
Manchurian said:
Hello famusc,
Thanks for your effort to create a kitchen for the i780! I wanted to create a backup of my Dutch i780-rom (PDA: i780XKHA3) and I managed to dump part00.raw, part01.raw and part02.raw.
Now I wanted to convert part02.raw to a flashable .bin file so I could reflash this Dutch rom if I want to go back to factory defaults, but the warnings make me a bit scary to test the .bin I created, so I wanted to ask some questions first:
-The .bin has to be as large as possible, I have the i780pda_WWE_test2.bin which is 78.512 kB and my Part02.raw is 79.104 kB. The .bin I get when the conversion is finished has a size of 78.512 kB. Does this mean some data of my original dump is lost? (I kinda understand your conversion tool replaces the part02.raw file of a flashable .bin rom with another part02.raw which in my case is the Dutch part., but is all the information still in it?)
-My second question is if it is a problem if I used an English .bin with a Dutch .raw?
If you could please anwer my questions I would be very happy, because I have seen some requests for Dutch i780 roms and it might come in handy for other languages, because in this rom Windows Live Messenger is included (and obviously working). So maybe someone can extract it.
If you are interested I could upload the .raw files i have dumped and maybe you or someone else can create a flashable Dutch rom from it (or extract WLM if it is needed).
Grtz,
Manchurian
Click to expand...
Click to collapse
Thank you for using my kitchen.
First of all I ask you to use version 0.2 BETA: it contains some important corrections in conv3 tool.
Now:
1) Part02.raw is usually bigger than required. So we are interested into its shrinked size. I think that your 78512K bin file should be good.
In 0.2 kitchen it is explained how to check bin size is enough for new data.
2) It's not clear whether you'll have problem with a bin of a different language than raw file. As for my experience, I always got connection problem when I used a different language bin. You can try and then have a look at connection settings and at wifi Internet-Work settings. If you find no connection defined or you can't connect through wifi, than it doesn't work.
You should use a Dutch bin to be sure you'll have no problem.
Hope I helped you,
Bye
Hi, Thank You for your I780 Kitchen ,
this is first time i build a rom,
may i know that where can i found the file
part02.raw?
Thank You for reply =)

Samsung i780 kitchen - release 0.2 BETA (New Version!)

PLEASE NOTICE THAT THIS KITCHEN IS A VERY EARLY BETA AS IT HAS NOT BEEN DEEPLY TESTED
*** USE IT AT YOUR OWN RISK! I ASSUME NO RESPONSIBILITY! ***
Hi guys,
after many days of testing I'm releasing my kitchen for i780.
It is very basic: no gui, only batch Windows scripts.
What you can do with this kitchen:
A) Convert your Part02.raw dumped rom to bin flashable PDA rom
B) Create a dump folder to cook your own rom and recreate a bin flashable PDA file.
Please notice that there's no tool included to edit, add or delete modules and files from rom dump.
You must use one of the tools available here in forum to do this or do this by hand.
Donwload the zip file and extract everything.
READ CAREFULLY THE README FILE IN THE ZIP ARCHIVE
This file explains how the procedures work and what you need.
PLEASE TEST THIS KITCHEN AND REPORT YOUR RESULTS
I thank chaimd for his bintonb0 tool, tadzio for his tools and Juggler for conv3 sourcecode.
I also thank Topogigi for his original procedure.
I modified conv3 tool to make it work with i780 rom files and made split and merge tools.
If you want to try this kitchen, I thank you!
[FONT=&quot]If any guru in the forum wants to make a gui for this kitchen or insert tools for module, file and registry editing (like the ones you can find in other kitchens), it would be appreciated.[/FONT]
Issue 1: it seems there's a problem with Part02.raw conversion. It screws up connection settings. Problem is being investigated.
[Partial solution]: it seems that this problem is due to both size and language: I used an English rom to convert an Italian Part02.raw.
Using an Italian rom seems to solve the problem. But you must check the new rom size: if it's too big it gets cut down and it doesn't work.
Version 0.2: this version contains a new conv3 release. This release it's a little bit more complicated than the previous one but it supports a wider variety of rom images and guarantees correct conversions. Previous release could lead to incorrect roms so you should consider it as deprecated.
For Issue 1, limitations are still the same: you should use a rom of the same language of the dump and mind the result size
this is just great
great job
great effort for the great device.
I will try for sure, thanks a lot
Recreate???
At first thanks for the kitchen!!!
But I got one question... How can I rebuild the dump folder and what files are needed in the kitchen directory to recreate???
Do I just have to start RecreateBin.bat and it uses the files from the dump-directory???
THANKS!!
mievalt said:
At first thanks for the kitchen!!!
But I got one question... How can I rebuild the dump folder and what files are needed in the kitchen directory to recreate???
Do I just have to start RecreateBin.bat and it uses the files from the dump-directory???
THANKS!!
Click to expand...
Click to collapse
You must read the PDF file in the kitchen directory. Some parameters may change according to the ROME used
Hi Famusc,
Great Kitchen!
I have some questions before I can try your kitchen.
In the PDF you mentioned, an existing bin PDA ROM, what do you mean by that and how to get it? I have E1 ROM .raw files with me but not the .bin file.
Cheers,
Vibranze
vibranze said:
Hi Famusc,
Great Kitchen!
I have some questions before I can try your kitchen.
In the PDF you mentioned, an existing bin PDA ROM, what do you mean by that and how to get it? I have E1 ROM .raw files with me but not the .bin file.
Cheers,
Vibranze
Click to expand...
Click to collapse
you need flashable pda part file for convert,
like XHD1 pda file (you can find in this forum).
vibranze said:
Hi Famusc,
Great Kitchen!
I have some questions before I can try your kitchen.
In the PDF you mentioned, an existing bin PDA ROM, what do you mean by that and how to get it? I have E1 ROM .raw files with me but not the .bin file.
Cheers,
Vibranze
Click to expand...
Click to collapse
Hi,
Existing bin file will be used as a model ton convert your raw file. Famusc said that the bin file must be the largest possible. So far, we use the D1 bin file. The probleme is E1 raw file part is larger than D1 bin file.
There may also have concerns related to the language of ROM file. I try to cook a French raw file with an UK D1 rom, and the result is a broken ROM
Hi Eunjea & Webise,
Thanks for the explanation.
My current stock ROM is D1 and how to convert it to .bin format if I want to use mine?
Actually I always use English ROM and replace the wince.nls and add some fonts to support Chinese reading
Btw, how do I know what is the value for first jump, footer start and footer checksum address? In the PDF, the first jump address is on 444400 and in my bintonb0.txt I also have 444400, can I follow the same address?
Cheers,
Vibranze
webise said:
Hi,
Existing bin file will be used as a model ton convert your raw file. Famusc said that the bin file must be the largest possible. So far, we use the D1 bin file. The probleme is E1 raw file part is larger than D1 bin file.
There may also have concerns related to the language of ROM file. I try to cook a French raw file with an UK D1 rom, and the result is a broken ROM
Click to expand...
Click to collapse
I just want to backup my ROM which is built by my operator so that if I have problems with the upgrade I can always go back to my original ROM.
How can I create the bin files for te part 1 and 3?
Can anyone advise, as there is no bin file for the Omnia this kitchen will not be compatible, right? Or is there a way to create one?
I managed to dump an Dutch rom, version E1.. Could you explain how I can make a flashable image for the complete rom and/or how to make a radio rom from the three parts I dumped?
Furthermore, i have had some issues when I dumped the rom with the instructions that were in the readme.pdf.
There are some connection problems, that the originally phone doesnt have..when I flashed my rom, there werent any connection settings visible. e.g. settings > connections > connections > advanced > select networks, here was nothing visible.
It seems a bit like the same problem that people had with the english dumped E1 rom. Is there a chance that certain files from the raw files werent correctly put in the i780_flashable.bin (final product) ?
Is this the latest version of famusc's kitchen?

HP iPAQ 21x Custom ROMs-Help Needed!

Hello, I'm new here, and I have been attempting to make two custom ROMs for the HP iPAQ 21x series, and I ran into a huge problem. I have two dump folders, and I can't figure out how to turn either of them into an NBH(or NBF) file. Any help would be highly appreciated.
Edit:Oh, and also, in case anyone was wondering, I'm trying to make them a Windows Mobile 6.1 ROM and a Windiows Mobile 6.5 ROM, and they are both(as far as I know) clean, except for the HP stuff.
nbh or nbf... ? for what ? it is inpossible to flash it back, you need bldiag.nb0 and hpimage.bin (foxconn format) but fortunatly pdocwrite works fine, so you need to: dump or download dump of imgfs (part02, os) unpack it via imgfstodump, cook to wm 6,1 or 6.5, then convert back to imgfs via imgfsfrom dump, and write via pdocwrite, xip can be also writed by this way, xip is part01, it works but i'm not a rom cooker so I cant cook it myself...
edit: it is also possible to edit marvell obm's and bootloader, but only via linux
edit2: here is my post about ipaq 214 and pdocwrite http://forum.brighthand.com/showpost.php?p=1762892&postcount=4
edit3: it will also works on any 21x and 11x and as I think on other hp devices manufactured by foxconn
I'm sorry elektrownik, but I don't really get what you're saying, I'm not very experienced with this ROM stuff, this is the first time I've ever tried to make one. But in response to what you're asking(I think), I was going to make them NBH files, make a backup ROM image of the device, and then use the HP RUU, which I have made to look for a file called 'RUU_signed.nbh'(what I will name them), to update the device via Activesync connection.
Update:OK, I've managed to get a little further, and now I have two BIN files, and two NB.PAYLOAD files, and I'm pretty close to turning them into NB Files.
But how do you want to sign it for hpruu it need hp cert and key, or did you cracked it. Anyway here is default rom. http://rapidshare.com/files/2236847...n_marked_internally_with_custom_extra_data.7z
Oh, well I didn't know it had to be signed, but in the ROM files which I was basing mine off of(which I thought you made) was an HP digital signature file(.cer) that said it went an HP 21x Image Update, I clicked on it, Windows said it installed the certificate, and then the file dissapeared. I'm not sure if that will help use the HP RUU or not, but I found it kind of odd. Also, if you'd like to take a look at it I can put it up for download somewhere(there was another one).
Fdo35 said:
Oh, well I didn't know it had to be signed, but in the ROM files which I was basing mine off of(which I thought you made) was an HP digital signature file(.cer) that said it went an HP 21x Image Update, I clicked on it, Windows said it installed the certificate, and then the file dissapeared. I'm not sure if that will help use the HP RUU or not, but I found it kind of odd. Also, if you'd like to take a look at it I can put it up for download somewhere(there was another one).
Click to expand...
Click to collapse
just do what I wrote - cook wm 6.1 or 6.5 to romdump convert it back to imgfs and it will be posible to write it to device by pdocwrite application
Fdo35 said:
Update:OK, I've managed to get a little further, and now I have two BIN files, and two NB.PAYLOAD files, and I'm pretty close to turning them into NB Files.
Click to expand...
Click to collapse
What parameters did you use for Tadzio's imgfs tools on NBSplit?
Fdo35 do you know how to flash ipaq 21x?
Maybe you can work together with some people already trying to make wm6.5 rom....
Kind regards,
W.
Steven855 said:
What parameters did you use for Tadzio's imgfs tools on NBSplit?
Click to expand...
Click to collapse
What's "parameters", I don't know what you mean. Also I don't remember using NBSplit, I started out with a IMG file which I then dumped.
Edit:Oh wait, I see what you mean. I didn't use NBSplit, I was following the attached directions to reconstruct ROM, except it wasn't for the device the file specified, and instead of 'imgfs.bin', I used a file called 'ipaq214.img', and instead of 'Windows.nb' I used a file called 'flash.nb'. And, I'm pretty sure that elektrownik made both files.
lol why you all dont read what i wrote, i have rom, which was reconstructed from dump, but it impossible to flash it from sd like on htc by flash.bin, ipaq 214 need bldiag.nb0 and hpimage.bin to be flashed from sd, but those files never was released so it is impossible to study format in which they coming, 214 can be also flashed from pc, but it need foxconn application and like before hpimage.bin, and there is official metchod - hpruu, but files which it use need to be signed first, we dont have cert and key to sign them, it wold be possible to patch hpruu to delate sign validation but i dont see anyone who working on this, as i wrote only one working metchod is pdocwrite application, i check it and it works, but i'm not room cooker so i cant cook wm 6.1 or 6.5 imgfs...
I think there are quite few topics about it.
It would be maybe better to have EVERYTHING relevant in one so everyone who posesses knowledge can help.
Now it looks that we (you) are inventing hot water... no offence - i appreciate all the hard work you put into this. But we (you) need better cooperation and clean topic.
I am grateful to everyone who share and try to make something. Respect to you all!
Kind regards,
WODP
The HP iPAQ 110 has a ROM update on HP's website, is it possible to get any of those files from that?
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=215348&prodSeriesId=3644061&prodNameId=3644062&swEnvOID=4014&swLang=13&mode=2&taskId=135&swItem=hh-59617-3

Categories

Resources