Hi all,
Since re-installing activesync my PC will not pair with my PDA. The PDA connects as a guest and I can use activesync to install software and browse files, but I cannot sync!
I believe a sync wizard is supposed to open but this doesn't happen.
I really hope you can help as I currently have no calendar or contact data on the PDA.
K
Kavafy said:
Hi all,
Since re-installing activesync my PC will not pair with my PDA. The PDA connects as a guest and I can use activesync to install software and browse files, but I cannot sync!
I believe a sync wizard is supposed to open but this doesn't happen.
I really hope you can help as I currently have no calendar or contact data on the PDA.
K
Click to expand...
Click to collapse
Open AtiveSync with phone NOT connected, goto "File" and "remove portable device" (or similar, I've italian version, I don't know exacly string in english).
If there is an old configuration, in this way you'll remove it, then it must start the wizard... (I hope...)
Hi!
Thanks for the reply! There are no existing partnerships in Activesync, because it is a new installation!
K
Kavafy said:
Hi!
Thanks for the reply! There are no existing partnerships in Activesync, because it is a new installation!
K
Click to expand...
Click to collapse
I thought it was a re-install... You can try removing all drivers and ActiveSync and reinstalling all, it seems an istallation problem or a wrong ActiveSync version...
Try to download ActiveSync newly
If you have any kind of firewall software try to disable it...
Then, if activesync works, you have to set up new firewall rules...
Did any of these methods work? did you do something else to make it work??
This is how I got it working.....
go to settings/connections, open USB-PCand untick "the enable advanced network configuration"
if this does not work, and if your trying to sync to an outlook server then in settings/connection, choose connections, chose advanced tab, select networks, then ensure both have chosen the same network ( ie my Work Network). On the chosen network chose edit, and you should see a Proxy Setting tab.. Choose this and ensure the only top box is ticked ( this network connects.....)
worked for me... dunno why?
yeah try xda-boj's one it should work fine
start\settings\connections\usb to pc and uncheck 'enable advanced network functionality'
Thanks for the suggestions. I know I wasn't clear in my earlier posts, so:
- I had Activesync 4.5 installed, and it worked.
- Then file transfer from the PDA to the PC stopped working (the files appeared to transfer, but did not appear on the PC)
- So, I uninstalled Activesync 4.5, downloaded it again, and reinstalled it.
- After the re-install, Activesync would not create a partnership with my PDA running WM6.
- The partnership wizard does not start!
- I don't get any error message; in fact nothing happens, except that the PDA connects as a "guest", so I am able to browse files and install software but not actually sync.
- I have tried: disabling Windows Firewall; disabling Avast! anti-virus; checking that all connection protocols are enabled in the "network connections" control panel; re-installing Activesync again; and finally I got the same error on another PC.
- I haven't yet tried unchecking the "Enable advanced network functionality" box - I'll try that as soon as I get home tonight.
Beyond uninstalling Activesync, is there anything else I should be doing to start with a clean system?
Thanks again,
K
I have the same problem.
You can try reinstall the active sync app (repair option) and then reconnect and uncheck "the enable advanced network configuration".
I am doing this evey time
I've tried unchecking "Enable advanced network functionality", but that doesn't solve it!
K
lhrt said:
I have the same problem.
You can try reinstall the active sync app (repair option) and then reconnect and uncheck "the enable advanced network configuration".
I am doing this evey time
Click to expand...
Click to collapse
Where can I find this option?
K
start->settins->USD to PC-> Enable advanced network functionality
Oh, OK. I'd already done that! Keep coming in with suggestions though!
Related
just updated and this is a HUGE speed boost on my 8525. A few questions though, does anyone know where i can get the video call cab or the name of it in the ext_rom to see if i have it saved on my pc, also i updated and as soon as i plugged my usb cable in it tried to install some RSID(cant remember exactly what it was) drivers and i read a solution to take out the entries in the registry on my pc but now it tries to install windows mobile drivers and once it finishes i get the yellow exclamation mark and a failed to install message so now im unable to sync and my 8525 doest detect it like it did before. does anyone have a fix for this? also im running the latest ActiveSync 4.5
EDIT: I read on here that someone had this issue and it was fixed via the 5-in-1 addons is this true? is there another way to get mine working, anyone have a link to the htc usb drivers?
To sync correctly you need to do the following:
(on your device) Goto start>settings>connections>USB to PC and untick "Enable advanced network functionality". This should allow the device to talk to activesync.
(on your pc) Go into activesync (without the device connected) and goto File>Connection Settings, in the drop-down menu titled "This computer is connected to:" select "The Internet".
Hope this works ok. The video call option is enabled using the files in this post.
wow man thanks your a life saver it worked like a charm.
mrvanx said:
To sync correctly you need to do the following:
(on your device) Goto start>settings>connections>USB to PC and untick "Enable advanced network functionality". This should allow the device to talk to activesync.
(on your pc) Go into activesync (without the device connected) and goto File>Connection Settings, in the drop-down menu titled "This computer is connected to:" select "The Internet".
Hope this works ok. The video call option is enabled using the files in this post.
Click to expand...
Click to collapse
No problem
Hello,
I've upgraded my HTC P3300 with the htt://member.htc.com downloadable HTC_P3300_FRA_3.13.406.1_4.1.13.44_02.94.90_Ship_R.exe
The ROM updated like a charm.
Since done I can no more connect my P3300 to Internet through my PC while using ActiveSync (4.5).
This worked correctly with WM5, on standard settings.
The USB to PC "Enhanced network" setting is enabled, I tried to disable and enable it again with no change. All settings are by default.
My PC get a 169.254.2.2 IP adress and I can Ping 169.254.2.1
Trying to load a page in IE returns a warning window "Connection impossible, go to connections settings"
Thanks for any suggestion,
Jean-Jacques
Astier said:
Hello,
I've upgraded my HTC P3300 with the htt://member.htc.com downloadable HTC_P3300_FRA_3.13.406.1_4.1.13.44_02.94.90_Ship_R.exe
The ROM updated like a charm.
Since done I can no more connect my P3300 to Internet through my PC while using ActiveSync (4.5).
This worked correctly with WM5, on standard settings.
The USB to PC "Enhanced network" setting is enabled, I tried to disable and enable it again with no change. All settings are by default.
My PC get a 169.254.2.2 IP adress and I can Ping 169.254.2.1
Trying to load a page in IE returns a warning window "Connection impossible, go to connections settings"
Thanks for any suggestion,
Jean-Jacques
Click to expand...
Click to collapse
check out your settings in active sync, ive had this problem a few times and when i change the settings to work in the config page of active sync, the problem goes away.
Found, thanks
On the PC in ActiveSync:
File/Connection settings/ This computer is connected to ... Internet !
Jean-Jacques
Could you have it set to Automatic?
I had the same issue, solved it with this post http://forum.xda-developers.com/showthread.php?t=321471
It's always started on my TyTN. I don't know why, but when shutdown AS, after few minutes it's started again. Also problem is that I don't see him in Running programs list ???? I have WM6.
shumar said:
It's always started on my TyTN. I don't know why, but when shutdown AS, after few minutes it's started again. Also problem is that I don't see him in Running programs list ???? I have WM6.
Click to expand...
Click to collapse
go into comm manger and disable direct push
egoist6 said:
go into comm manger and disable direct push
Click to expand...
Click to collapse
Direct Push is disabled.
Problem is that ActiveSync is only started, it's not trying to synchronize. So no Data connection.
Also everything worked perfect, and I think that problem caused installation of FlexiMail, which is uninstalled, but problem stay...
just a try: use schap's advanced config tool and uncheck "connection always on"
another try might be to make sure that AS is really closed (and not minimized). use htc task-manager or x-button change the settings to "close apps" when pressing the x-button.
Unchecked and closed, but showing again.
another try might be:
go to activesync, menu->schedule
and set "peak times" and "off-peak times" to "manually"
already adjust like that and doesn't help.
I seem to have the same issue...seen it with wm6 and now wm6.1
hm.
maybe one of the following might help:
use htweakc and disable "GPRS/G3 Auto Attach"
goto activesync, menu options and delete your exchange server (be sure to backup your data as it deltes all your emails, contacts, etc.)
delete all of your internet/isp connections and your work network connections and re-add them.
if these do not work, please check if there is a 3rd party software which might be configured properly.
Hey all, ever sinced i flashed 6.1 to my phone, I cant connect to active sync. I have been flashing thru boot loader with no problems, but I need to get activesync woking again. Can anyone help? I have hard splv7 and and using CRC ver7. I have deleted and downloaded activesync and checked all connection settings on the pc and phone, no joy. thanks for any info.
Never mind, I figured it out. on phone Settings/Connections/USB-to-PC uncheck (or check) "Enable advanced network functionality" I had to uncheck the box.
Hi,
when I connect it to the PC me appears the window of "chosen connect" but any options use, start always the option selectionated in preselesction SETTING-> USB to PC also if I check option " you ask type of logon when me connection"
sorry for my english
tahnk you
Are you trying to say that your phone always connects to your computer as a USB device even if you select something different?
Sounds like it.
I've got a similar issue, my screen is dead so I can't select anything and it comes up as a disk drive. Kinda need to get it to active sync so I can back the phone up to restore to my new one.
Without being able to see or use the screen I can't, unless there is a keyboard method to choose activesync.
when I connect htc (with USB) to PC, appears this option selection:
(whatch the image to the link)
farm3.static.flickr.com/2007/4514994648_92afa7bd15.jpg
now, if I select the option disk-drive,
don't start option disk-drive but activesync because is preselect in menu "SETTING-> USB to PC"
(whatch the image to the link)
farm5.static.flickr.com/4060/4496803689_c5ace06880.jpg
the same think if I select the option activesync but the preselect in menu "SETTING-> USB to PC" is diskdrive, start option activesync...
the same think if I select the option activesync but the preselect in menu "SETTING-> USB to PC" is diskdrive, start option activesync...
Click to expand...
Click to collapse
This is the proper behavior
siusky said:
when I connect htc (with USB) to PC, appears this option selection:
(whatch the image to the link)
farm3.static.flickr.com/2007/4514994648_92afa7bd15.jpg
now, if I select the option disk-drive,
don't start option disk-drive but activesync because is preselect in menu "SETTING-> USB to PC"
(whatch the image to the link)
farm5.static.flickr.com/4060/4496803689_c5ace06880.jpg
Click to expand...
Click to collapse
This is not the correct behavior.
So it seems like it works properly if you have the preselection set as "diskdrive" One option could be to just leave it set there.
A common problem though, and is probably what is giving you trouble, is the checkbox "enable faster data syncronization". Frequently, this just doesn't work out (not sure why) and the computer can not establish an active sync connection. The ppc or activesync self corrects by defaulting to a diskdrive connection.
uncheck the "enable faste data syncronization" box in settings, restart your phone and pc (verify the box is still unchecked after restart) and try the active sync again. Let us know how it goes... good luck.
cbeck said:
This is the proper behavior
This is not the correct behavior.
So it seems like it works properly if you have the preselection set as "diskdrive" One option could be to just leave it set there.
A common problem though, and is probably what is giving you trouble, is the checkbox "enable faster data syncronization". Frequently, this just doesn't work out (not sure why) and the computer can not establish an active sync connection. The ppc or activesync self corrects by defaulting to a diskdrive connection.
uncheck the "enable faste data syncronization" box in settings, restart your phone and pc (verify the box is still unchecked after restart) and try the active sync again. Let us know how it goes... good luck.
Click to expand...
Click to collapse
Tried with the faster data box and without, mine starts active sync...which I want and need, it lasts for about one minute, then it disconnects and can no longer recognize the device unless I shut down the computer and do it again....but it just repeats this same things every time.
siusky said:
Hi,
when I connect it to the PC me appears the window of "chosen connect" but any options use, start always the option selectionated in preselesction SETTING-> USB to PC also if I check option " you ask type of logon when me connection"
sorry for my english
tahnk you
Click to expand...
Click to collapse
Hello!
Please insert this into registry:
Code:
[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers]
"DefaultClientDriver"="RNDIS"
[HKEY_CURRENT_USER\Software\HTC\BootLauncher\Services\HTCUSBToPCPopUp]
"Module"="\\Windows\\HTCUSBToPCSrv.dll"
"Prefix"="UTP"
"Index"=dword:00000000
"Info"=dword:00000000
"Order"=dword:0000000a
"Flags"=dword:00000000
"Keep"=dword:00000001
"Context"=dword:00000000
"DisplayName"="HTCUSBToPC Service"
"Description"="USB To PC PopUp Service"
[HKEY_LOCAL_MACHINE\Software\OEM\USBtoPC]
"AskConnect"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\HTC\USBToPCPopUP]
"OnlyTwoChoice"=dword:00000000
"ItemFlags"=dword:0000001f
"DeviceCompanion"=dword:00000000
"ShowTime"=dword:00000005
[HKEY_LOCAL_MACHINE\Software\OEM\USBtoPC]
"SyncMode"=dword:00000000
"EnableAdvanceChecked"=dword:00000001
"DisablePopUpUI"=dword:00000000
This should reset USB_To_PC to default settings and also ensure that you're running the proper driver.
Have a nice day,
Jackos
Just tried another cable...and it's working...idk why, but glad it's working again.
I have changed the keys of registry but i have the problem because ther is not some keys....
[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers]
--> "DefaultClientDriver"="RNDIS" <----> (the value is Mass_Storage_Class) <--
[HKEY_CURRENT_USER\Software\HTC\BootLauncher\Services\HTCUSBToPCPopUp]
"Module"="\\Windows\\HTCUSBToPCSrv.dll"
"Prefix"="UTP"
"Index"=dword:00000000
"Info"=dword:00000000
--> "Order"=dword:0000000a <----> my value is 10(0X00000A) <--
"Flags"=dword:00000000
"Keep"=dword:00000001
"Context"=dword:00000000
"DisplayName"="HTCUSBToPC Service"
"Description"="USB To PC PopUp Service"
[HKEY_LOCAL_MACHINE\Software\OEM\USBtoPC]
"AskConnect"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\HTC\USBToPCPopUP]
"OnlyTwoChoice"=dword:00000000
--> "ItemFlags"=dword:0000001f <----> I have not this key <--
--> "DeviceCompanion"=dword:00000000 <----> I have not this key <--
--> "ShowTime"=dword:00000005 <----> I have not this key <--
I have --> "Option" = 1(0X00001)
[HKEY_LOCAL_MACHINE\Software\OEM\USBtoPC]
"SyncMode"=dword:00000000
"EnableAdvanceChecked"=dword:00000001
"DisablePopUpUI"=dword:00000000
Just create the keys.
I tried to make a cab from those reg entries but couldn't make it install successfully...
There might be typo ("Advance" instead of "Advanced" ?) or is the cab I made not good for my machine (TP2) ?
Could anyone make OR help me make a working cab installer (without confirmation please, my "touch" screen is broken and I need it to put the original rom back before sending my TP2 back) ?
Thanks a lot