Develop Bugs

looking for upgarde for the xda2i

I have a xda2i with the following info
ROM version 1.10.00 WWE
ROM date 12/24/04
radio version 1.00.00
protocol version 1337.39
ExtRom 1.10.124 WWE
I am looking a for a upgraded version if anyone can help... it would be great if there was a wa to get rid of the o2 custom stuff on the xda too i dont like that too much can anyone help
Acid

At the moment there are no updates for the XDA2i but there is rumours of one in the pipelines... if its true or not remains to be seen but we can only hope.
As for removing the customised crap just do a hard reset (you'll loose all your stuff) , press power + reset.
Then when its installing a box will appear asking "Personal" or "Corporate" user, choose the corporate option and enter the password "0506"

hi
at the moment the only newer rom from our factory rom is that of pda2k.. do a search for my posts and in there you will see where to get it and how to get past the country id error..

Danny-B- I didnt see the box will appear asking "Personal" or "Corporate" user it just says will customize my xda in 3 seconds and i cant do anything to stop it and i cant even uninstall the software it is linked into everything.. its really annoying and this o2 thing is just eating up memory and space... can you help
Acideax
I have a xda2i with the following info
ROM version 1.10.00 WWE
ROM date 12/24/04
radio version 1.00.00
protocol version 1337.39
ExtRom 1.10.124 WWE

Are you sure you didnt miss it ?
Im sure it auto installs personal user if not selected within a certain time.
The best thing to do would be, Hard reset it, then just sit and watch it install till it gets to the choice point.
Another thing that might be slowing your device down can be the SD card if its over 512Mb , the XDA 2i sems to have a slight problem with them and slows everything down, well it does in my case anyway.

rom
my xda2 i spec.
rom version-1.11.00 wwe
rom date-01/27/05
radio -1.00.00
protocol-1337.39
ext rom version-1.11.923 wwe

XDA2i & WM2005 ?!?
HI !
I´m using the XDA2i / O2-Germany with WM2003SE..
ROM 1.11.01GER
Ratio 1.03.00
Protokoll 1337.42
ExtROM 1.11.132GER
I´ve tried to upgrade to WM5 but...
HimaUpgradeUt.exe 1.2.0.0
nk.nbf 1.50f
WM 2003 ROM Image Editor 1.4.26
the firste tries I´ve got ERROR: wrong device, so I changed the devicetype from PH10 to PH10C like written on start-settings-deviceinformations...
I´ve tried again...
I started HimaUpgradeUt.exe and after a few sec. the screen say´s "deviceinformations: XXX
XXX
ROM XXX
Image info´s XXX
.....
if I press UPGRADE the massage "don´t remove USB & power" appiers then a new screen with the status for the upgradeprocess....
BUT... after 20 sec. I always get ERROR 101 (connectionerror).
- any idea ?

The XDA2i does not support the leaked WM2005 it only works on the XDA 2
Although the devices look the same the internal hardware is different.

The XDA2i does not support the leaked WM2005
sad to hear that...
ok, thank you but do you know if it´s possible to get an upgrade in the future ?
do you know where the problem is? (Image ore Updatesoftware?)
???!!!

The problem is that the software (wm2005) has to be custom made to suit the hardware in the phone so ... HTC - the makers of the phone or O2 would have to "build" the software for the phone.
Its because all the correct drivers and such have to be correct for the device to function.
But you never know, it might be a possible upgrade in the future, youll just have to wait and see.

Upgrade for XDA2i
Ok, I´ve found an original Upgrade-Tool & the Rom-files from o2UK....
My next Problem is the Password to edit the nk.nbf to chage the Image...
I´m using WM 2003 ROM Image Editor 1.4.26
Xda IIi ROM v 1.10.124 (43.6MB) - english
AlUpgradeUt.exe 2.0.0.1
when I start the upgrade I always get the
"ERROR 120: COUNTRY ID ERROR".... that´s because I have the
o2 - Germany device...
Can somebody help me to findout the right password for the Rom-editor ?
[/b]

o2 XDA mini not been able to synchronized

hello guys
I broke down my XDA mini as i post before while doing upgradint from german to english but the thing it has blank screeen and I am not been able to synchronize it to the PC with Asynch... its showing serial ver 1.02
hwo to synchronize so that i can install rom
much need help and thanx a lot for help
Imran

Just connect your device to the pc. Then on your mini's screen it will be written USB and etc. AS shouldn't be green. Now you can try to reflash

Alva said:
Just connect your device to the pc. Then on your mini's screen it will be written USB and etc. Active Sync shouldn't be green. Now you can try to reflash
Click to expand...
Click to collapse
with a shipped rom (.exe file on your PC) or follow the instructions for SD card upgrade. You'll need a copy of your own rom though and transfer the first 416 bytes or so on the downloaded rom-image.
By the way how did you break it? Shipped rom, SD-card or ...?
Cheers, M

HOW TO CHANGE LANGUAGE in o2 xda mini...
hello guys i got o2 xda mini in germany (OS German) and i would like to change it to english version...at first i made a backup of the existing rom.. and when i tried to do the rom update with couple of rom updates
MaUpgradeUt_noID.exe( i got this error "upgrade utility error 101")
ROMUpgradeUt.exe(connection error 101)
iam not sure of the suitable rom update to change german version to english ...please help find the suitable romupdate for my o2 xda mini....
specifications
ROM version 1.12.01 GER
Rom date 05/28/05
Radio version 1.12.00
Protocol version 1337.42
ExtRom version 1.12.144 GER
Model number M10A
Plat form POCKET PC
IMEI 357308001351036
Thanks in advance

You can find the info in thisbthread about 1.13 WWE rom
http://forum.xda-developers.com/viewtopic.php?t=33475
read it carefully though.
Good luck, m

i got it thank u very much oltp
hi oltp
thank u very much
actually i had synchrinisation .....and i dont know the version with which i should update...ur info helped me a lot thank u very much..
justin

up-grade to wm6 and reset problem

Hello
I am new here, i have a qtek 9000 that run wm5, what should i do to up-grade to wm6. What up-grade do you suggest i need in order to increase the performance of my phone.
Here is all the information that i have on the phone.
rom version : 1.30.77 wwe
rom date 02/20/06
radio version; 1.11.00
Protocol version: 42.45.P
ExtROM version: 1.30.9090
The second problem that i hace is that the phone is constanly reseting, i don't know why, but when battery reach approx. 80% it turn off and reset. Then i have to plug in the charger in order for it to restart? Can anybody help me
thanks

My first post !
Hi, for the reset problem I suggest you to look to the wiki, you will find some types of strategies to fix this, it seems to be a battery problem(just my opinion). For the upgrade you have to look wath's the boothloader version of your device. If you have 1.00, you have to upgrade the boothloader before flashing a new wm6 rom. In any case you will find all this and other informations in the wiki. When you will be done, if you want, I will suggest you the best roms available .
P.S.: excuse me for bad english.

keleric said:
Hello
I am new here, i have a qtek 9000 that run wm5, what should i do to up-grade to wm6. What up-grade do you suggest i need in order to increase the performance of my phone.
Here is all the information that i have on the phone.
rom version : 1.30.77 wwe
rom date 02/20/06
radio version; 1.11.00
Protocol version: 42.45.P
ExtROM version: 1.30.9090
The second problem that i hace is that the phone is constanly reseting, i don't know why, but when battery reach approx. 80% it turn off and reset. Then i have to plug in the charger in order for it to restart? Can anybody help me
thanks
Click to expand...
Click to collapse
before upograding you have first to make a lot ( I really mean it) of reading thru 1) XDA_wiki and 2) all 3d you can on the different wm6 available ROMs ( see upgrade wm6 section) You can have an idea of what are the problems users have/are encountering.
My 1 cent
a)Enter into bootlader mode ( pls don t ask how, look and search) and find out if you have a G3 device ( vers 1.0x) or G4 ( vers 2.x) . Depending on this you have to first check if the ROM upgrade you ve selected among the different available is OK for your device. Few ROMS infact have different version for G3 and G4) . If you have a bootload vers 1.0 or below, first upgrade to a more recent version before even thinking to upgrade ROM.
the upgrade Bootload tools are available in general on your device site ( I have an Imate , I have the sw there) or look and search here....in this site there is EVERYTHING! go to the ftp section , link unders XDA-Wiki, Universal and search
b) upgrade to Active e Synch 4.5
c) Create a folder where you ll put the selected Wm6 version that you ve picked and unzip it.
d) You ll see the following files:
EnterBL
Get device data
RUU.conf
Ruu.dl
Ruuenc.dll
UI.dll
ROMUPGRADE.exe AND !!!!
nk-.nbf ( this is the ROM UPGRADE)
ms.-nbf ( this is the external ROM)
This is almost all what you need to start to upgrade. Infact you might also want to upgrade to a most recent radio version ( radio._nbf) . I am using 1.15 that is very stable and powerfull but pls read comment of users using the selected Wm6 you ve picked and check their coments. A higher version is not implicitely a better version.It depends on Wm6 rom version and the operator you re using.
Therefore, if you want to upgrade the radio as well , proceed to the FTP of universal, and download the radio version you like . Unzip the file , copy and paste JUST the radio._nbf file to the folder above created.
e)Connect to AS and make the last synch before the upgrade and disconnect
f) take sim and sd card out.
g) put down firewalls and antivirus on your PC
h) open AS and uncheck File/connection Settings/ USB connection
i) connect device to PC, you ll see AS wont start ( of course)
l) enter into bootloader mode
m) click on Romupgrade.exe
n) follow EXACLY instructions on your PC screen...be cool, be patiente. It will take some 20 minutes....
when everything is finished , disconnect , do a NORMAL soft reset and here you are.
Flag again USB connection in AS and synch. you have now a wm6 version. I am using Ranju 7.1 and it flys as an angel on my JJ, but I suppose there are plety good ones around

qtek 9090 upgrading problem

Hi, im newbe so, please be patient.
i've upgraded mi qtek 9090 frow win 2003 se to win mobile 6 but i have some problem
the phone module is not working anymore ( it's no possible to turn phone on)
the pda do not save the gps settings after it discover by blutooh ( every time i turn off the gps reciver and turn on again i have to set again the serial port, the passkey etc ).
i've tryed to upgrade the radio but i'm not able do download file from ftp at the following link because ftp doesn't work:
ftp://xda:[email protected]/BlueAngel/Radio_Roms/Radio_1.15_Type_II/BA_RRPT_Radio_11500.exe
at the moment my configuration is:
rom vers 5.60.00.wwe
rom date 03/02/05
radio verison 1.13.00
protocol version 1.337.42
ext rom version none
at the time im writing it seems that phone module is working again( ghosts in my pda ? )....anyway
can someone help me suggesting something or can someone send my the file i need to upgrade my radio or blutooh version (if this can help ) by email?([email protected])
thank you in advance and sorry 4 my english.

i think this is a wrong place to post.
i'll post it again in bluangel 3d
sorry

All device info gone ???

Hey,
I'm pretty new at this, so I'll explain how i've gotten in to this.
1. Bought a HTC tytn UK and I wanted it in dutch
2. Since I couldn't find an original rom i flashed it to the dutch rom from shap's (wich is actually great)
3. Then i did find an original rom but wasn't able to flash it so i used "HTC Hermes SIM & CID Unlock - v3a"
4. The original dutch rom works fine now, except when i go to device info
Rom version: empty
Rom date: empty
Radio version: empty
Protocol version: empty
CPU: 8 squars
speed: 6 squarsBe...
No imei number and so on.
Can someone please help me, maybe in the future when i try to sell the phone this must be ok.
Thx a lot to all xda developers here !!!
edit: original bootloader and ipl were: SPL-2.05 IPL-1.04 (maybe it has something to do with that?)

roeldm said:
Hey,
I'm pretty new at this, so I'll explain how i've gotten in to this.
1. Bought a HTC tytn UK and I wanted it in dutch
2. Since I couldn't find an original rom i flashed it to the dutch rom from shap's (wich is actually great)
3. Then i did find an original rom but wasn't able to flash it so i used "HTC Hermes SIM & CID Unlock - v3a"
4. The original dutch rom works fine now, except when i go to device info
Rom version: empty
Rom date: empty
Radio version: empty
Protocol version: empty
CPU: 8 squars
speed: 6 squarsBe...
No imei number and so on.
Can someone please help me, maybe in the future when i try to sell the phone this must be ok.
Thx a lot to all xda developers here !!!
edit: original bootloader and ipl were: SPL-2.05 IPL-1.04 (maybe it has something to do with that?)
Click to expand...
Click to collapse
1) you need to flash HardSPL
2) make sure you have flashed a new radio after using the CID/SIM unlocker, due to the fact that it downgrades it to a very old radio for it to work.

I had this issue when I tried a version of HTC Home Customizer that I found somewhere on the net.
To make it all come back, I had to hard reset, and not reinstall the program that caused it. I'm not sure if any other programs could cause that issue, or why it was caused.

I've flashed my device to HardSPL. now wich radio rom should I use?
I've found several radio rom but I don't have a clue wich one is best for me (Belgium, Mobistar)

flash a shipped ROM from here, there is a dutch HTC from there. get to boot loader, pressing the ok on the left, power on right, and stick stylus in at the same time. plug it to active sync, and run the exe file from the WM 6 rom upgrade/downgrade.