Related
Hi All,
I have looked all over the place but i can not find any rom updates for the Vodafone V1620 (PH20B2) Device - can anyone point me the the right place.
I have tested various files but i just keep getting errors and i don't want to make a paper weight out of my PDA just yet.
My PDA also has the qwerty keyboard for info.
Looking forward to a responce. Thanx in advance.
Pedro Goncalves said:
Hi All,
I have looked all over the place but i can not find any rom updates for the Vodafone V1620 (PH20B2) Device - can anyone point me the the right place.
I have tested various files but i just keep getting errors and i don't want to make a paper weight out of my PDA just yet.
My PDA also has the qwerty keyboard for info.
Looking forward to a responce. Thanx in advance.
Click to expand...
Click to collapse
have read this ???
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
because this is a German ROM "CE Rom 1.40.01" Does it mean that the operation system will be in German? if so is it possiable to get an english version.
Thanx for your help.
because this is a German ROM "CE Rom 1.40.01" Does it mean that the operation system will be in German? if so is it possiable to get an english version.
Thanx for your help.
I'm getting ERROR 120: Country ID ERROR 44-44-45-45 with "gm_vodade_14001_206_11300_ship.exe" if it helps.
hanx for your help in advance.
Pedro Goncalves said:
I'm getting ERROR 120: Country ID ERROR 44-44-45-45 with "gm_vodade_14001_206_11300_ship.exe" if it helps.
hanx for your help in advance.
Click to expand...
Click to collapse
used this tools
http://semrawut.net/indra9110/mda_ROM/upgrageNoId/UpgradeNoId.rar
put all the file: ms_.nbf/nk.nbf/radio_.nbf on that folder and put your BA to Bootloader and makesure activesync not active ... and then just start upgrade....
I'm getting ERROR 120: Country ID ERROR 44-44-45-45 with "gm_vodade_14001_206_11300_ship.exe" if it helps.
hanx for your help in advance.
Pedro Goncalves said:
Hi All,
I have looked all over the place but i can not find any rom updates for the Vodafone V1620 (PH20B2) Device - can anyone point me the the right place.
I have tested various files but i just keep getting errors and i don't want to make a paper weight out of my PDA just yet.
My PDA also has the qwerty keyboard for info.
Looking forward to a responce. Thanx in advance.
Click to expand...
Click to collapse
Hi Pedro
If you ever get a solution that works PLEASE let me know.
I have one of these devices as well and the bloody thing keeps slipping into 'divert all calls' without any input from me.
Also poor Blue Tooth sound is REALLY annoying.
Robin
Hi indra9110,
I now get an error 123: Radio Image File Checksum Error.
Vodafone are bloody useless.
I have just spent 27 minutes on the phone with Vodafone trying to persuade them that they actually sell this phone and should support it.
The latest they have suggested is that they will replace my V1620 with a Qtec 9090!!!!!!!!!!!!!!!
What a waste of time and effort....
Robin
I did the same when they gave us the qtek 2020i, we had so many issues with the devices so they gave us these new ones and basically told us that there is no support available for it.
They will just keep replacing them then i guess.
Pedro,
Trying to help, but really confused...
You're in the UK, so I assume you got your V1620 from them. I'd never heard of that, so I typed it in their web search engine and it comes up with... nothing...
You list your device as a PH20B2. That's what I've got, and it's a Blue Angel, so replacing it with a QTek9090 is pointless as it's the same thing!
VF UK did rebadge the Blue Angel (aka QTek 9090) as the VPx, starting sometime around a year ago, but only users who berated their lack of a PDA strategy seemed to get one. As you can see, it still has never made their website, comes up as unknown.
For your info, if you go to the xda-developers Blue Angel site, use the QTek 9090 1.40 WWE ROM (which includes the 1.12 radio). I can confirm that that worked on my PH20B2.
One quirk I'll also alert you to is unlocking. First, check that your unit is indeed simlocked, as some weren't. Second, "maimach's" universal unlock code works with PH20B1's but not the (seemingly rarer) PH20B2's.
FYI - I'm having some difficulty with the 1.13 ROM update, but that's a minor irritation, and probably something I'm doing wrong.
Hope this helps.
br
Well I have a Vodafone box with Vodafone labels all over it and all the details say it is a V1620.
As did the brochure.
But talking to anyone at Vodaphone about it is a total waste of time.
The problem is I am not savy when it comes to these updates.
I need something REALLY simple that says 'install this' and it will all work.
I have not seen that yet for my device.
Oh it IS simlocked to Vodafone but I don't care as I am ON vodafone.
Robin
OK, first port of call is:
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
Have a good read of the how to's... print 'em...
I selected the Qtek 1.40.147 download, as recommended by 'jbn' who gave me the confidence to do it (top bloke).
Just follow the instructions...
Make sure you back up everythin before you start as it wipes the PDA.
Also, write down the Vodafone GPRS/CSD settings etc. Saves a call to VF helpdesk...
Takes 10 mins. Well worthwhile...
Any yes, Vodafone UK did release a device they don't understand, are too afraid to market mainstream, don't have anyone to support, and don't provide updates... There's no sign of a specialist internal tech group, despite months of trying. Something to remember when your contract is up.
I'm not bitter, but I was a little bent out of shape till I discovered this site! Now I'm OK.
br
I GOT IT SORTED OUT :lol: :lol: :lol: :lol: :lol:
I'LL POST IT WHEN I GET A LITTLE TIME I'M CREATING THE STEP BY STEP NOTES FOR IT.
Pedro,
Nice job. Before you go set the thing up just so, try and add the Radio 1.13 ROM, as it requires a hard reset. That will save you wasted time. Let me know how you get on. br
Okay have not done Radio 1.13 ROM yet oops, need to look into it.
Thanx for the reminder - any ideas on how to add it on it's own or do i have to do the whole process again?
You can just add it on its own - as in the Wiki link I sent you. I have not done this yet, as I made the mistake of putting everything back as I liked it after the 1.40, then realised the Radio ROM required a hard reset. Planning unfortunately really was the last phase of implementation!
br + good upgrading.
Thanks bossye....
There seems to be no plan by Vodafone to upgrade the VPx or V1620. Development of WM2003 does not have much priority compared with WM5 and there is precious little chance of them providing such an image for these models. Personally I am not yet convinced that we are missing anything there.
As noted, although these are the PH20B2 and differ slightly from other models that are more widely supported on this site (for example the SP unlocker does not at time of writing handle this model, but you can always ask), the generic images for iMate PDA2K and Qtek 9090 seem to be reasonably OK. I have tried both and currently run the PDA2K image. However I did not bother with the radio upgrade. I would only be interested in solving the problem of echo when used with Bluetooth car kits and this is not solved with that upgrade according to most users.
Pedro, the upgrade steps are documented in Wiki, including the use of the MaUpgradeUt_NoID.exe. This may save you some writing.
Hope this helps.
i can't upgrade the Radio 1.13 ROM or anything now it's not accepting anything, it just says congratulations and do a hard reset but everything remains the same.
I've read through the WWE thread and still haven't managed to find people's experiences with this ROM and their UK Orbit's.
Can people please post any issues, and more importantly if I'll brick my Orbit (as from the shop so unsure whether CID locked / unlocked) if I follow the steps in the original thread?
Thanks.
I had no luck. I'm waiting for WM6 ROM from O2 UK to get the phone working again as I can still access the bootloader.
Same for me. Followed all the steps, but still my phone bricked. Mine was CID locked, but because there were several succesful upgrades on CID locked devices I also tried it. I'm also still able to enter bootlloader, so just have to wait for retail WM6 ( have no RUU signed update to restore my device )
I moved from a Orbit with a HTC P3300 Rom (CID Unlocked) to a WM6 Bebe Rom at the first attempt.
It's so much quicker than the WM5 Rom. It's a lot more stable.
If you want me to post the steps and a Apps I've tested I'll do so tomorrow.
I couldn't get Bepe's to load with the boot loader, but the next part with the windows.nb file worked..........
Sort of, I think the bluetooth is not working properly as I can't create a port to allow me to sync with my pc. Apart from that it is working fine. (Touch wood)
doesn't seem worth the risk...
sounds to me like it isn't worth trying at the moment then! shame cause i want to get wm6 running but would rather not have a bricked device ... and the odds look high!
come on o2... where's our official rom?
I've just upgraded my O2 Orbit and it worked fine. CID unlocked it with IMEI-Check and then followed Bepe's instructions.
mmmm... fair enough but i just don't wanna shell out $20 to get a cracked rom...
If I am not mistaken is it not £20 as opposed to dollars I would pay a tenner but like you I will wait for £20
Does anyone know if HTC will require an actual P3300 IMEI in order to download the WM6 update when and if they release it?
itschase said:
Does anyone know if HTC will require an actual P3300 IMEI in order to download the WM6 update when and if they release it?
Click to expand...
Click to collapse
probably, they will require you to give this to prove you have a HTC branded device. TBH they shoudl provide a ROMforAll no matter what provider you have you should be able to upgrade to a clean manufacture rom.
for those who have O2-Orbit UK and can access only bootloader, did U try to flash german WM6? just run file downloaded from german o2 (without any hexedits etc. just run xdaorbit-windows-update.exe). I think it should work, because CID lock is not to lang version, but for operator (02_01) and both UK and DE Orbit are ARTE2000. Worth a try. If it works let it boot to calibration screen plug usb cable and reflash using bepe's ROM. Let us know. I'm not sure if it'll work, I'm CIDunlocked.
phsnake said:
for those who have O2-Orbit UK and can access only bootloader, did U try to flash german WM6? just run file downloaded from german o2 (without any hexedits etc. just run xdaorbit-windows-update.exe). I think it should work, because CID lock is not to lang version, but for operator (02_01) and both UK and DE Orbit are ARTE2000. Worth a try. If it works let it boot to calibration screen plug usb cable and reflash using bepe's ROM. Let us know. I'm not sure if it'll work, I'm CIDunlocked.
Click to expand...
Click to collapse
Do you think the same would apply if you Hex edited ARTE10000 to ARTE2000? Sily question, I know, but is that the only level of security that actually looks for model ID?
in o2 ger image its already ARTE***** so u dont need to change anything (it means it shoul work for arte100,110,1000,200 models maybe 300 as well - htc love) But this is looking only for ModelID, in ROmUpdate Util it checks somehow for ModelVendor/Operator - addr:x0003BA6C - password BsaD5SeoA
I also "BRICKED" my Orbit. I am also the impatient type. Why wait for O2 to release a ROM image? I have spoken with O2 directly. My friend even works for their technical division. As far as I have been able to find out, from friends and his friends at O2, there is NO O2-UK WM6 in the pipeline at the moment. Not enough users apparently. When I found out this I put my Orbit into O2 shop for repair. It was flashed under warranty as a software fault. I have since CID-unlocked it and flashed to WM6.
Absolutely amazing. WM5 to WM6 is night and day. So much faster and a lot nicer looking too.
Shand359 said:
Absolutely amazing. WM5 to WM6 is night and day. So much faster and a lot nicer looking too.
Click to expand...
Click to collapse
My experience: O2 Orbit bought in CZ. My way was: CID unlock -> try-and-brick (...) -> German original O2 WM6 ROM (with bootloader) -> Arte WM6 from bepe.
I am very happy now (extremly stable!) and at this moment I do not plan even upgrade to a new ROM.
Btw solved the issue with localization (keyboard only - Resco works perfectly) and external keyboard support for my beloved iGo Sierra bluetooth keyboard: AE Keyboard mapping SW solved my needs
MY experiences
Being a corporate O2 customer, when I bricked my Orbit they sent me a new one and said I could do what I wanted with the old one.. it's still a brick, having tried every suggestion on this forum!!!
MY new one, however, is running Bepe's WM6, having run the USPL first.
I tried Black&Blue, but found it drained the battery too quickly, and I reall ydon't need all the extras it comes with. I've got Bepe's WM6 running brillianlty - all I add is a cracked version of TomTom 6.02, which runs perfectly, BatteryStatus purely for a power display, no overclocking needed, and TodayAgenda for improved calendar on Today.
I use push mail to connect to my office exchange server, and have all my personal mail ending up at fastmail.net, where I connect to using IMAP - deleting from the phone deletes properly on the IMAP server now, unlike on WM5, so you really can have a synchronised mailbox usin IMAP and a free account at Fastmail.net...
I also have JetwareMobile installed to enable me to use my Siemens HKW600 Car kit (£40 on ebay, superb!), and I have some Sony DR-BT30Q bluetooth headphones which work perfectly...
I have a CID LOCKED UK o2 Orbit. I ran the USPL program by Prof and then Bepe's WWE ROM.
worked fine and WM6 is great!
jamin100 said:
I have a CID LOCKED UK o2 Orbit. I ran the USPL program by Prof and then Bepe's WWE ROM.
worked fine and WM6 is great!
Click to expand...
Click to collapse
Yes, but that doesn't work if you've already bricked your Orbit
Does anyone happen to have a WM5 ROM to restore to if the WM6 goes horribly tits up - I'm not overly looking forward to the idea of not having the pride of the mobile fleet working... the humiliation!
Hello Everyone, Have spent 6 Days hunting for "O2 Orbit Original WM5 Rom ARTE200 1.25.206.2" with little success
I am now putting a bounty on the head of this ROM in the form of a £40 Paypal transaction. I will make instant Payment after the ROM has been verified as the genuine ROM and then make the ROM available to all though Rapidshare, and with some luck help to un-brick a lot of O2 Orbits before O2 UK WM6 is released.
Contact me on [email protected]
Problem caused by - Updating ROM without running USPL on a CID Locked O2 Orbit, The device is USB Bootloader contactable but requires the identical original ROM to restore "Error 244 Device ID"
Many thanks to everyone for their continued help and support.
Rom
1.25.206.2
Radio
02.67.90
Protocol
4.1.13.28
MOD EDIT - SEE POST 12 OF THIS THREAD
the only way you will find this rom, is either on o2 xda website after a WM6 update and hopefully they will do this as a downgrade option after upgrade to wm6.
or
the only other way is to know someone who works for o2 uk, there repair centre will have the only copy, and the only way to maybe even get a copy, is if you are good friends with someone in that department.
currently, there is no rom, for o2 anyway, yet.
goodluck finding it though, you just never know.
oliversettle said:
Hello Everyone, Have spent 6 Days hunting for "O2 Orbit Original WM5 Rom ARTE200 1.25.206.2" with little success
I am now putting a bounty on the head of this ROM in the form of a £40 Paypal transaction. I will make instant Payment after the ROM has been verified as the genuine ROM and then make the ROM available to all though Rapidshare, and with some luck help to un-brick a lot of O2 Orbits before O2 UK WM6 is released.
Contact me on [email protected]
Problem caused by - Updating ROM without running USPL on a CID Locked O2 Orbit, The device is USB Bootloader contactable but requires the identical original ROM to restore "Error 244 Device ID"
Many thanks to everyone for their continued help and support.
Rom
1.25.206.2
Radio
02.67.90
Protocol
4.1.13.28
Click to expand...
Click to collapse
Hi, I have got O2 orbit with this rom and if somebody tells me how to get it from xda into the pc I am happy to do it and share.
majo_scigo said:
Hi, I have got O2 orbit with this rom and if somebody tells me how to get it from xda into the pc I am happy to do it and share.
Click to expand...
Click to collapse
There is already a dump availalbe, but no known way to bypass the bootloader security to load it.
How are the guys at IMEI-Check unbricking them? Either they have a WM5 O2 rom (which means it has leaked) or are they hot-swaping/reflashing roms, or using some vulnerability in the bootloader?
Just out of interest, does anyone have an XDA that has been unbricked by IMEI-Check and did it show any signs of being disassembled?
O2 Orbit Original WM5 Rom ARTE200 1.25.206.2 "IMEI-CHECK" Information
O2 Orbit Original WM5 Rom ARTE200 1.25.206.2
IMEI-CHECK Information
"" The only thing we can offir (for EUROPEAN customers) is to send the device so we can fix it.
We don't have a "magic" ROM which can fix your device. It is hard work to open it and to reflash the rom directly to the flash chip...
IMEI-CHECK Team ""
good guy!
thank you very much!
I would be very very grateful if this ROM appeared!
well, well...
not sure if i'm 100% if this is ground breaking stuff, but i just received my xda from o2 repair centre and when i went to put my sd card in phone there was one in it already from o2 which has WM5 image on it?!
step0011 said:
not sure if i'm 100% if this is ground breaking stuff, but i just received my xda from o2 repair centre and when i went to put my sd card in phone there was one in it already from o2 which has WM5 image on it?!
Click to expand...
Click to collapse
This is indeed quite interesting, it is obviously a SD flash used for restoring the Orbit. If you could make an image of the SD card I'm sure there are many people here who would be eternally grateful.
well, this will be done as soon as i get home tonight, if someone is willing to host the file i will make it available,
step0011 said:
well, this will be done as soon as i get home tonight, if someone is willing to host the file i will make it available,
Click to expand...
Click to collapse
I send you on PM.
Mac
http://rapidshare.com/files/41574866/Arteimg.nbh
rite, uploading to mac now, managed to upload to rapidshare, (address in title)
It's works!!!
http://makus.folijka.pl/OrbitO2UK.rar
set as sticky if you can )
Thanks !
Mak
Thanks Step0011 for the rom image and makus for confirming that is works - i have made the thread a sticky - will download the image and confirm it works myself.
Step0011 should get the £40 bounty from oliversettle!
I Just UNBRICKED my orbit with this
Hi. A BIG BIG THANX !!!!! I just unbricked my orbit with this. I tried to flash it with WM6 and failed to run the USPL and bricked it. Now using this original WM5 put it back where it was before I bricked it. I had usee Artemis USPL and replaced the RUU_USPL_signed.nbh with this and worked like a charm from boot loader. (record button and softreset) Now I can flash anything I want and bring it back if I brick it again. Thanx a lot. YeeeeeHa
Hey guys,
I'm new to this forum but I must say that I am very impressed abt the works done. I do have a very expensive brick!! Ya! Ya.. my orbit is a BRICK. well I didn't do it, A friend of mine did.. tried to flash WM6 mini O2 into the orbit and VIOLA!. A BRICK!! Well! I knew this wud happen but hey, it wasn't me who did it.Hence I'm in this forum day in day out. tried every possible thing. flashing with SD or MTTY, every thing U guys had offer but got the same device ID error. so far no hope, but am currently downloading the image thru rapidshare http://makus.folijka.pl/OrbitO2UK.rar. Have to get a rapidshare account though. Hope this works.... will post soon.... keep ur fingers crossed.
A Big Hug to step0011. for a hope.
And the rest for the XDA developers.. all i can offer is my wallet.cause I'm not a software developer, but am into hardware repairing. And I will post the results if any for u guys who keeps this forum alive and kicking.
cheers pof and to all.
Another happy WM5 Orbit user again. It has beena chore using an OLD spve200 for the last few weeks. Taught me a valuable lesson though.
Thanks for the up.
Bravo! And well done to the O2 service bod who forgot to take the MicroSD card out!
Now how do I use it? Put it on a SD card and switch on?
i just replaced the german rom file with the uk orbit one (renamed to match original) and then ran the update from windows (phone in bootloader via usb).
A little suprised it actually worked in vista!
Yippeeeeeeeeee!!!!
Fisrt of all whoever he is he owes step0011 40 bucks..
Lots and lots of thanks to step0011 for providing the ROM image and also to the guy who forgot to remove the SD card. He had made a lot of people happy.
Hi guys.
I did it. My orbit is alive and kicking. there is nothing to it, just download the ROM and run RUU. and VIOLA! good as knew.below are the details
bootloader (this is all I can see now but before when it was bricked it showed the GSM no. too )
IPL 1.25.0001
SPL 1.25.0000
Device information
ROM version: 1.25.206.2 WWE
ROM Date : 10/4/06
Radio version : 02.67.90
Protocol version : 4.1.13.28
ExtROM version : 1.25.206.10
Works like a charm. to think that I wud have to wait for official ROM release.
Now I can do anything I want. I can brick it as much as I can. and flash the WM6 ROM. Now I am thinking of tinckering with the ROM cooking steps u guys are telling abt. I'm going to customise my own ROM. . First of all to superCID the orbit. wish me luck.
much thanks to all who keeps this forum alive.
BRB.
Hi everyone,
I picked up the Softbank X02HT but it came with the Chinese ROM.
Since I'm using it in Japan, I'd like to switch over to the Japanese ROM.
I wasnt able to find the Softbank Japanese ROM anywhere online... perhaps someone had a suggestion?
Thanks for your help!
also very much interested in that
i am in a similar situation and already posted several requests about switching my Dopod ROM to a Softbank one or at least get all the important functions of the Softbank ROM working on my Dopod 730...but so far no reply.
if you receive any enlightenment please share it with me.
cheers
beefandcorn,
Im in the same boat as I picked it up in HK to use here in Tokyo
kinda ironic how it was setup to use here and now it only partially functions.
I cant seem to find a ROM anywhere for it as well
some of the settings from the X01HT will work.
Im tempted to go to softbank and get them to reflash it back but i have a feeling ill get busted for having an unlocked one.
The keyboard layout is f'd up not all the keys match, I can send SMS but cannot receive, and I cannot access internet via 3G...
What is your experience like so far in Japan for the dopod rom?
Using foreign ROM on Softbank network
Actually, I’m also using the HK ROM on the Softbank branded X02HT in Japan.
SMS and 3G Packet service works okay but it seems the MMS is impossible to get working.
Just to confirm, here are my settings for internet access.
In “Connections”, I have a connection that “Connects To” “The Internet”.
The access point is “softbank”, the username is “[email protected]” and password is “softbank”.
In “Proxy”, I didn’t have anything setup.
This is the paid packet service, where you pay per use.
I think you also need Softbank to have your plan include “packet service”.
It looks like you can also setup the flat rate internet service but I haven’t tried that.
Sorry, I’m not sure about SMS issues.
Is it possible to dump the ROM from a retail Softbank X02HT?
Then, we could flash the official ROM onto the phones and all the problems go away.
Hope it helps…
i agree
yes if somebody could provide a ROM dump of the softbank rom that would help... well also need to figure out HOW to flash it then...
The company I bought my phone from (mail order from the US) offered me to reflash the phone to the Softbank ROM but it is not cheap and I also would need to send it back to the US for that (and pay for the DHL/UPS costs)
So I would prefer doing it myself (if its not such a hassle)
Yea. I got my X02HT in HK, and although everything works fine here on AT&T, I'm having an issue with remembering where some of the symbols are.. since some of them don't match up... any luck finding the Original ROM?
It seems that the original Japanese ROM also has English. and I would assume that this ROM maps the Keys correctly... as opposed to the Dopod ROM installed now...
Please HLP w/ Tmobile WIZA200 in JAPAN...cant get signal
I'm starting to think there is no solution I have unlocked and uploaded and reloaded and re-unlocked, etc but still the same problem...My phone can not access the cellular network. I did a manual search and my phone does not acknowledge the JP Softbank network. I have put different kinds of ROM's and OS upgrades, etc, but still no success. I'm starting to think that these great unlocked PDA's only work in Europe and North America and not in JAPAN.
I have seen several other threads with others having the same problem so I am going to try to ask this question in several different threads.
I have no errors and everything works fine in the process, just like everybody says it does, but still nothing for acquiring a signal. It just either shows an exclamation point or searching dots. I have compared the various carrier options on my phone to other Softbank phones and everything is the same networks except acknowledging the Softbank network.
I'm praying there is some smart person out there who can figure this out...PLEASE...PRETTY PLEASE...
Works on DoCoMo but NOT on Softbank
I also have a Dopod ROM and funny thing is, the phone works like a charm on the DoCoMo Network (Phone and SMS) but when I pop in a Vodafone SIM it cannot even connect to the Softbank network
Very Strange...
we have a thread going on this issue and maybe you can add some input.
http://forum.xda-developers.com/showthread.php?p=1942813&posted=1#post1942813
I had a Softbank X02HT. Stumbled my way thru a DOPOD "cook (?)" and used it in Australia and Guam on GSM. Came back to Japan, threw in the softbank card...CHANGED THE NETWORK BAND...to Japan and AUTO. Worked perfect on DOPOD ROM. No 3G. I am working that right now.....
anybody dumped the rom yet???
This is the Softbank rom from X02HT
First Boot screen show "Test Only Not for Sale SOFTBANK" Just ignore it....hopefully when done with cooking WM6.1 with softbank rom, kindly erase that Boot Screen.....
Hopefully Anyone can make X02HT Softbank rom WM6.1.....Please share......
heres the link......
http://rapidshare.com/files/149405794/RUU_Cavalier_VF_KK_1.20.761.4_1.46.50.10_182_Test.exe
P.S.
cruzzmz really donno to upload it to ftp em sorry dude....
wowwwwwww I don't know how, but this ROM worked for me!!! The ****** SIM Locked message dissapear! Now, I can put a unlock code for my cell..... I'm going to see how (Any suggestion ?)
Thx!!!
What do you recommend me... still with this Softbank rom or install a Dopod (One from the fTP)?? I need english language!
pls wait a lill bit
ppls pls wait a lill bit more since i am on a long vacation now. ive dloaded the softbank rom. ive dump it & will cook a wm6.1 on it soon. just one catch though the chome screen will b in english i think hv to cook & try it on my dopod 1st ... will keep u all posted
cruzzmz said:
ppls pls wait a lill bit more since i am on a long vacation now. ive dloaded the softbank rom. ive dump it & will cook a wm6.1 on it soon. just one catch though the chome screen will b in english i think hv to cook & try it on my dopod 1st ... will keep u all posted
Click to expand...
Click to collapse
Can anybody tell me is it fine if i run this rom on my x02ht without running anything else first?i mean any spl thing required?any did the enter the unlock code screen really appeared?
ipratik said:
Can anybody tell me is it fine if i run this rom on my x02ht without running anything else first?i mean any spl thing required?any did the enter the unlock code screen really appeared?
Click to expand...
Click to collapse
Yeah dude! Try it, at least, it worked for me. Now I can play with the WM registry and those things that was unavaible after.
Good luck
caza00 said:
Yeah dude! Try it, at least, it worked for me. Now I can play with the WM registry and those things that was unavaible after.
Good luck
Click to expand...
Click to collapse
yes!!!!!!!!!i tried and it went with no problem. thanks for showing the way ...and atleast now there is a space to put the unlock code...good luck with your newborn x02ht. and the internet settings are also in place. so can use softbank unlimited plans...
Did you try to install another ROM, a Dopod ROM or something??
I wanna try one but i don't know if it is a good idea or not ...
caza00 said:
Did you try to install another ROM, a Dopod ROM or something??
I wanna try one but i don't know if it is a good idea or not ...
Click to expand...
Click to collapse
no. i didnt try anything else as i didnt have time and was quite satisfied with the softbank rom. but yes the network seems to be weak compared to the original rom.
Hi, I was wondering if someone could help me out with detailed instructions.
I am faily new to the world of PDA's and smart phones.
I just bought HTC touch Pro 2 from Telstra. Its all customised with Telstra/Bigpond.
My question is how can I remove Telstra customisation completely from the phone?
FYI,
Device Information.
Rom Version: 1019.841.3 (51489) WWE
Rom Date: 06/04/2009
Radio Version: 3.44.25.27
Windows 6.1
Your help would be highly appreciated. Also, could you please provide complete steps for the solution you provide.
Thanks for your help
Nothing much you can do. You can flash a custom ROM if you want to totally remove Telstra stuff.
Having said that there are some good stuff in Telstra ROM. Free web browsing to certain sites (BigPond, Sensis, Yellow Pages, Trading Post, etc.....) And there are free apps like WhereIs where the data download is not counted towards your usage. And there are 2 free apps Jetcet Print and Jetcet Presenter. The former for printing directly from phone and the latter for creating/editing Powerpoint slides.
But if you don't want any of these, you can always flash a custom ROM of your choice.
Yep just flash a custom rom simple
If you don't mind me asking, did you buy the phone outright or on a plan?
If outright, how much did you pay?
i'd like to get rid of the the telstra things too
phrak, i just bought mine yesterday at harvey norman, it was $1479 outright and with extended warranty (ex wty was 99)
pinkdiamonds said:
i'd like to get rid of the the telstra things too
phrak, i just bought mine yesterday at harvey norman, it was $1479 outright and with extended warranty (ex wty was 99)
Click to expand...
Click to collapse
Well you can always flash a cooked ROM if you like. I haven't yet as I'm quite happy with the Telstra ROM. I don't like the purple color theme so I installed another theme. I am quite happy with what I have got so far. Would wait for Telstra WM6.5 upgrade and see if it is any good.
You can manually remove Telstra items by editing registry
Check this forum.
http://forums.whirlpool.net.au/forum-replies-archive.cfm/1286616.html
Hi Guys
anyone know how i can get back my Original Telstra rom !
thanks
Touch Pro 2 Sprint on NextG
Hi I just got a Touch Pro 2 Sprint CDMA GSM version from the USA. I know you'd probably wonder why but because it has the inbuilt 3.5mm headphone jack. I unlocked everything on the phone and changed the radio to the 2.05.00WU (USCC test edited) version, changed the ROM to try the 6.5.3 energy rom. I know the phone supports CDMA 850. But aren't sure if it's now possible to get it to work on NextG.
Is anyone able to confirm if it's possible? I think it runs on the CDMA2000 1X 1900/800 band. And from what I've been reading it mightn't support the 2100 band, so mightn't be able to get it to work at all.
I'd like one with the headphone jack but like the keyboard also. Don't really want a Touch HD2 thought they would be alright with the 1Ghz CPU.
My problem is the Telstra Next g version is a Rhod110, not Rhod100. This means that when attempting to put Hard SPL on my brand new toy it comes up with a "fatal error"... No way am I gonna try putting a new rom on without Hard SPL... Soft SPL just freezes the whole thing and the only fix is to pull the battery...
Its also a different series from the other touch pro 2 available, 7381, not 7373...
Guess I'm stuck with the bloated stock rom until Telstra releases a wm6.5 rom or a new Hard SPL or Soft SPL are conjured up....
Downloaded the file enablerapinew.cab, able to flash Hard SPL... SWEET....
I have the same problem !
Hi there, it sounds like Im in the same boat as you are or were... I also have a RHOD110 from Telstra but I want to upgrade it to win 6.5 and I'm just not sure which ROM will be applicable a) for this model or b) for the Australia service (3g)
I wonder did you manage to get this sorted out and would you be kind enough to give me any info that may help from your own experence ?
Thanks in advance !
I have the same problem ! HELP NEEDED
ultramag69 said:
My problem is the Telstra Next g version is a Rhod110, not Rhod100. This means that when attempting to put Hard SPL on my brand new toy it comes up with a "fatal error"... No way am I gonna try putting a new rom on without Hard SPL... Soft SPL just freezes the whole thing and the only fix is to pull the battery...
Its also a different series from the other touch pro 2 available, 7381, not 7373...
Guess I'm stuck with the bloated stock rom until Telstra releases a wm6.5 rom or a new Hard SPL or Soft SPL are conjured up....
Downloaded the file enablerapinew.cab, able to flash Hard SPL... SWEET....
Click to expand...
Click to collapse
I have the same problem !
Hi there, it sounds like Im in the same boat as you are or were... I also have a RHOD110 from Telstra but I want to upgrade it to win 6.5 and I'm just not sure which ROM will be applicable a) for this model or b) for the Australia service (3g)
I wonder did you manage to get this sorted out and would you be kind enough to give me any info that may help from your own experence ?
Thanks in advance !
ultramag69 said:
My problem is the Telstra Next g version is a Rhod110, not Rhod100. This means that when attempting to put Hard SPL on my brand new toy it comes up with a "fatal error"... No way am I gonna try putting a new rom on without Hard SPL... Soft SPL just freezes the whole thing and the only fix is to pull the battery...
Its also a different series from the other touch pro 2 available, 7381, not 7373...
Guess I'm stuck with the bloated stock rom until Telstra releases a wm6.5 rom or a new Hard SPL or Soft SPL are conjured up....
Downloaded the file enablerapinew.cab, able to flash Hard SPL... SWEET....
Click to expand...
Click to collapse
Hi there, I'm kinda new at all this as well and I'm in the same boat as you are or were. I also have a Telstra RHOD110 and I want to upgrade to win 6.5, however, Im just not sure about a) which rom upgrade will work on the 110 or b) which one will be compatable with Australian 3G services ?
ANY help or assistance in this area will be greatfully appreciated !
Thanks in Advance
Download & install enablerpinew.cab. You should then be able to Hard SPL.. I also have Rhod110 from Telstra.
Next G works fine, its a hardware feature so it will always pick up Next G, but you may need to get the GPRS settings from Telstra and manually input them.
Use Manual Hard SPL if auto doesn't work, just need to install enablerpinew.cab 1st, and only once... After that any rom works finre...
Cheers...
ultramag69 said:
Download & install enablerpinew.cab. You should then be able to Hard SPL.. I also have Rhod110 from Telstra.
Next G works fine, its a hardware feature so it will always pick up Next G, but you may need to get the GPRS settings from Telstra and manually input them.
Use Manual Hard SPL if auto doesn't work, just need to install enablerpinew.cab 1st, and only once... After that any rom works finre...
Cheers...
Click to expand...
Click to collapse
I have an import RHOD100 that I bought SH. I have Flashed it with both the Aus Telstra Roms and neither seems to access 3G signal. Does this mean the phone physically cant or is there something else I can do???
FYI it actually gets better coverage than my Snap did and that was a telsta phone. But I dont know what the coverage will be like further out of town.
Im running:
1.86.710.3 WWE Rom
4.49.25.17
RHOD100
T7373
i myself want an RHOD110 because of the fact it is the AU model :/