Develop Bugs

How to set a BT GPS receiver on Universal with WM5???

Hi y'all,
i have a BT GPS receiver that i used with my Qtek 2020 (before this was stolen... ).
Now i have a XDA Exec from O2, but i am not able to set the receiver!
Anyone has any tip for me?
Thanks a lot...

...no one can help me out...??? Please...

Check out this guide and follow from after installing tomtom and you should get BT GPS working with exec, I did!!!
ps search term used was 'tomtom 5.1 guide'
hope this helps!
http://forum.xda-developers.com/viewtopic.php?t=28386

Hello,
first the bad news: not every bt-reciever is working...
but you should try this way:
Connection-Manager
Enable BT
Setting (Connection-Manager) BT-Settings
Tab devices and ad new partnership (be sure, BT-Reciever is on)
Pair it with your Universal (pin is usuall 0000)
Tap Com-Ports: new outgoing Port (your BT-Reciever) set to com 4
Tap Com-Ports: new incomming port (your BT-Reciever) set to com 8
Now it should work!

Thanks for the tipo...now i don't have my GPS receiver with me...but tomorrow i will give it a try.
The only thing that i find strange is: when i try to set the outgoing port i find my BT receiver in a box, but when i try to set the incoming port i dont' find it anywhere.
Something wrong?

Oh...and also...i use the software "GPS View" for the connection with the BT receiver...which port should i open (the COM4, the COM8 or another one?).
I ask you this because i have 10 COM ports available (from 1 to 10), but i cannot open all of them, because some tell me "COM porte error" when i try to open it.
Thanks for your help...

can anyone confirm if haicom-405 bt works with dopod 900?

Hustladave said:
Oh...and also...i use the software "GPS View" for the connection with the BT receiver...which port should i open (the COM4, the COM8 or another one?).
I ask you this because i have 10 COM ports available (from 1 to 10), but i cannot open all of them, because some tell me "COM porte error" when i try to open it.
Thanks for your help...
Click to expand...
Click to collapse
As I wrote before:
Tap Com-Ports: new outgoing Port (your BT-Reciever) set to com 4
Tap Com-Ports: new incomming port (your BT-Reciever) set to com 8
Best wishes
Teja

jona69 said:
can anyone confirm if haicom-405 bt works with dopod 900?
Click to expand...
Click to collapse
I follow the tips ...outgoing port (COM4 - which the only port can be used other failed to open), incoming port (COM8).
But it doesnt work with my Garmin10 .... which work well with my previous XDAIIs. Anyone use Garmin1o with Dopo900?
Thanks

Usually, there's no need to setup an ingoing COM port: my Holux 236 receiver, for instance, works perfectly paired with my Qtek 9000 and only the outgoing COM8 setup'd.
The only thing to pay attention for is that TomTom have to be v5.1 or above (better if v5.21), in order to work properly under Windows Mobile 5.0.

Well...in my previous XDAII worked perfectly using the software MAPSONIC and the GPS VIEWER with my BT receiver (and just setting the outgoing port).
I tried to do like Teja told me in his answer (setting the outgoing COM4 and the incoming COM8), but it still does not work.
I will try to get a TOMTOM 5.1 software to give it a try...

solved...and i don't need to setup the ingoing port...thanks for the tips

Hi there! I have MDA Pro from T-mobile (UK) and until now I couldn't set a COM port appart of COM0 port for BT-GPS...
Now have COM4 for outgoing port and tom tom once is connected after 5 seconds is disconnected and again after 5 seconds is connected and again is disconnected and again......
I am using TT 5.21
Help please

I have set the outgoing port on COM8, no ingoing port needed and it works fine...although i don't have TOMTOM!!!

Orange M5000 and BT GPS and TOMTOM 5.21
I thought I share this just in case there are other like me out there.
I had an Orange M2000 with tomtom 5.0 and 512MB SD card.
I installed TT5 as normal on the PDA but the maps on the 512MB SD card.
I just got an Orange M5000 which is XDA EXEC and could not install TOMTOM 5.0 from CD. The SETUP kept on crashing on XP PC.
Here is the solution:
1) Put the SD card with the maps in M5000
2) Did NOT install TT5 from CD but downloaded navupd521.exe from the tomtom site and installed this on M5000 fine.
NOTE: I did not have to copy CAB files. I just installed this as normal from my PC with the USB cable
3) TT installed fine but I could not get it to recognise the BT GPS
I used the instructions below from the forum:
a) Turn on BT GPS
b) on PDA goto BlueTooth seeting --> New Partnership and supply the password (0000) to pair it.
c) Then in Bluetooth settings select the COM PORTS tab
d) Select Incoming port and set to COM8
e) and again in COM PORTS tab select Outgoing ports and select COM4
f) Start TOMTOM and goto Preferences and find GPS Configuration and select OTHER GPS and select COM4
It works every time... ALL my FAvourites etc are still there so no need to type them again.
So far WM5 and TT5 rocks. I will be testing it on the road with my Plantronics BT headset soon. With my old M2000, usually when TT5 is on the M2000 CPU does not have the juice and Bluetooth devices die or stop responding. Also when I stopped TT5 application the BlueTooth stopped.
We will see how M5000 improves on M2000
Thax...

i believe you shouldnt have a problem running your headset and bluetooth GPS together.
when i had a blue angel i ran TT3 with my SonyErricson Car Kit and the TT3 together and made vioce calls at the same time and even now with the Universal i can do the same! run them both together!
only thing is that occasionaly the TT5 seems to be a little behind my actual location if i have made/received a call luckily by only 30-40 yards so can still use the screen to see where my turnings are.
has anyone else found that and got the cure....
thanks

Using Artemis as GPS receiver for Windows

Hi!
Is there a way to use the GPS receiver that is built into the Artemis as a GPS Device for Windows (XP or Vista).
Maybe over Bluetooth or USB / ActiveSync connection.
I tried to set up Bluetooth COM Ports so Incoming BT connections connect directly to the GPS COM port, but without success... no gps data was coming through.
Also I search for a small tool to test the receiver... just a compass or something.
regards,
Daniel

You cannot just "bridge" the GPS com port to your desktop OS via BT. The BT stack was never designed that way. All BT com ports you use must have a piece of software behind it to fill it with data, or otherwise they are just empty cans.
In your case, you need a GPS splitter to get gps signals from the GPS com port, and then repeat it to a BT com port so that the other end can receive such signal. That will provide a working bridge for your data.
Try software such as gpsgate that works as described above.

Hello, you can try GPS2Blue is a little free program that will let you use your Artemis as a GPS.
You can find it here: http://users.skynet.be/hofinger/GPS2Blue.html
Enjoy.

i got myself GPS2Blue and installed it.
My problem now is, that i cannot set up a BT COM port!
I have the (german) B&Bv3 ROM (WM6). In Bluetooth Settings in the "COM Ports"-Tab. It says "Tap on 'New outgoing port' ..." but theres no button or something. Just the describing text and an empty ListBox.
since I cannot set up my COM port, GPS2Blue won't swich on right?
So... is this a WM6 bug or a B&B Bug or my brain-bug
Setting up COM ports in my firmware WM5 OS worked just fine.
Thanks you guys for the info!
but what to do now?

GPSgate can do what you want (but it is not free)

gpsgate can set up bluetooth com ports? i dont think so
this is not a gps problem anymore!
i posted a new thread for my new problem:
http://forum.xda-developers.com/showthread.php?t=315687

GPSGate can do it!!
Use this is the registration key:AmzeaBjw
Then your Artemis can pass GPS information to your PC through Bluetooth

Fransons GPS Gate will enable the sharing of GPS position to a number of different types of device, I am not too sure about posting a registration key for purchased software as these are specific to an individual user??? - Mike

Share GPS onto a laptop from XDA Orbit?

As the title. I had a search but didn't find anything so was wondering if it was possible to use the gps built into my XDA orbit with autoroute on my laptop?
Thanks in advance!

Have a look at Fransons GPS Gate, it will do exactly what you want try this page for a starter for ten http://franson.com/forum/topic.asp?TOPIC_ID=3968 - Mike

Thanks Mike!

gps2blue does the job too and is freeware. As the title says it works over bluetooth.

I'd been using gps2blue (which is freeware) in all my PDA+GPS (current HTC X7500 and previous Mitac Mio A701) works great.
You can... 1) Use the PDA as external GPS for a laptop/UMPC/desktop PC connecting the PDA using BT or USB cable. I use cable most of the times. 2) You can track the PDA possition at home PC. This means you can travel with the PDA and sending thru Internet the live position to be recorded in the home PC.
I was one of the beta testers.
Just give it a try: http://users.skynet.be/hofinger/GPS2Blue.html
Best Regards
mahjong

(Solved) External GPS in Windows mobile 6.5 beta

Has anybody managed to configure an external bluetooth GPS unit with the new windows mobie 6.5beta?
I can pair them, but the JRTGPS (JR-29) remains disconnected and when I try to connect it I get:
Code:
Your device did not connect with JRTGPS. The connection failed or the passcode is incorrect
Tomtom naturally does not see the GPS unit.
See settings at the bottom. By the way the JR-29 are very sturdy, small and compact and used standard nokia batteries so a lovely and cheap 42 channels bluetooth gps receiver!

paired easly by bluetooth gps
hi, i paired my blue angel easly,Garmin xt 5.00.20 software,connected without any problem,my bluetooth gps reciever is hulox slim 236.

homam_france said:
hi, i paired my blue angel easly,Garmin xt 5.00.20 software,connected without any problem,my bluetooth gps reciever is hulox slim 236.
Click to expand...
Click to collapse
Thats one of the best GPS I've had. I had another BT and had problems locking on Sats. Had a wired one and also had problems with Sats. GPSlim 236 always locks on atleast 6 Sats and I've had up to 9 at a time. Great buy!
@Gloomyboy: I haven't flashed 6.5 yet, so can't give you feedback there mate.

I have TomTom GPS and it works well with WM 6.5.

I have a Pharos and it works like a charm.

Well, it must be the JR-29 that doesn´t work with 6.5
pairs ok but afterwards stays disconnected (under the new bluetooth settings) no matter what I do
It works great with my old acer pda with windows 2003 ce

gloomyboy said:
Well, it must be the JR-29 that doesn´t work with 6.5
pairs ok but afterwards stays disconnected (under the new bluetooth settings) no matter what I do
It works great with my old acer pda with windows 2003 ce
Click to expand...
Click to collapse
Verify a few things...
1. Make sure you don't set BT GPS as Serial
2. Make sure you have assigned an Outgoing COM Port to the GPS (You need to know which one your GPS uses. IE: GPSlim236 uses Port 6.
3. Try both, Secured and Unsecured for the port you chose.(I use secured)
4. On Settings>> GPS Settings>>Program: verify that you have (None) for "Program Port Software
5. On Settings>> GPS Settings>>Hardware: Select the same COM port assigned under BT Outgoing Port. (my case Port 6)(Baud Rate 115200)
6. On Settings>> GPS Settings>>Access: Select Automatic
Hope this helps. Good Luck

gloomyboy said:
Well, it must be the JR-29 that doesn´t work with 6.5
pairs ok but afterwards stays disconnected (under the new bluetooth settings) no matter what I do
It works great with my old acer pda with windows 2003 ce
Click to expand...
Click to collapse
Settings for GPS in WM 2003 and WM 6.x are totally different.

thanks to everybody I got it working now!
In case anybody else has a JR-29 (they were very popular on ebay when I bought it some 2 years ago, cheap and with 42 channels)
Bluetooth Settings:
- Outgoing COM PORT 8
- Authentication passkey required = ON
External GPS:
- Program port NONE
- COM Hardware port 8
- Bauds 9600
- manage GPS on (works with off as well but seems to take longer to handshake)

Hi,
I have a gpslim240 but my situation is like gloomyboy. When I tried to pair my gps, it always said "wrong password". Can you tell me more about what you did to make it work ?
Did you do all the settings part BEFORE or AFTER trying to pair the devices ?
The GPS problem is the only thing make me regret to have a BA because all other things work great.
Any help is welcome.
Thx
mik

As soon as I try to pair up I am prompted for a password and enter 0000
that has never been a problem for me
I hear other passwords are 1234
and 00000

I know my password is 0000, I switch to WM2003 each trip I make to be able to use my GPS. I use it also with my laptop.
So I know for sure this is a problem with any rom WM5+. I was hopeless until today. I just want to know exactly what you done because if this is only a settings problem, it's a great new ... I thought it was a driver problem.

well for my GPS it is a MUST to disable secure connection but I have to enable authentica. Play with those settings...

I too have a problem like gloomyboy while using Windows mobile 6.5 beta without Ramdisk version. But I can connect to my external GPS Holux 1000 by using Garmin XT 5.00.20 software.
I didnt face any problems pairing or conecting to my holux 1000 with ramdisk version from Sundream's one.

Try swampys V3 full rom (not the basic version), it definately has working bluetooth drivers.
Setting up external Bluetooth GPS
You only have to do this, if you want to use an external Bluetooth GPS. If you have never used your external Bluetooth GPS, this takes five minutes.
Connecting via bluetooth
* Make sure that the Bluetooth GPS device is turned on.
* On your phone go to Start-->Settings-->Connections-->Bluetooth.
* Set the checkbox "Turn on bluetooth" on the "Mode" tab.
* Go to the "devices" tab and choose "Add new device".
* Your bluetooth GPS device should appear in the list, otherwise recheck that its bluetooth functionality is turned on.
* Select your GPS device and click "continue" on the very bottom of the screen.
* You may be asked for a password - if you know the password enter it of course. Probably you don't because you didn't configure it.
o If you don't know the password, first try entering nothing (empty password) and continue.
o If that doesn't work try entering four zeroes "0000".
o Otherwise try reading the GPS devices manual or the manufacturer's web page.
* After you took that hurdle, check "serial port" as connection service - then click finish.
* Your device should now be listed on the bluetooth devices tab.
Configuring the COM port
* Go to the COM tab in the same Bluetooth system settings.
* Select "new connection".
* Select your Bluetooth GPS device.
* A COM connection will be shown "e.g. COM8", note this down, and click finish.
* Go to Start-->Settings-->GPS (or External GPS).
* Go to the "Hardware" tab and make sure that the GPS hardware connection is the COM connection you just noted down.
Check if your GPS works
* Start TomTom and configure other bluetooth device, port8
mik- said:
I know my password is 0000, I switch to WM2003 each trip I make to be able to use my GPS. I use it also with my laptop.
So I know for sure this is a problem with any rom WM5+. I was hopeless until today. I just want to know exactly what you done because if this is only a settings problem, it's a great new ... I thought it was a driver problem.
Click to expand...
Click to collapse

gloomyboy said:
Try swampys V3 full rom (not the basic version), it definately has working bluetooth drivers.
Setting up external Bluetooth GPS
You only have to do this, if you want to use an external Bluetooth GPS. If you have never used your external Bluetooth GPS, this takes five minutes.
Connecting via bluetooth
* Make sure that the Bluetooth GPS device is turned on.
* On your phone go to Start-->Settings-->Connections-->Bluetooth.
* Set the checkbox "Turn on bluetooth" on the "Mode" tab.
* Go to the "devices" tab and choose "Add new device".
* Your bluetooth GPS device should appear in the list, otherwise recheck that its bluetooth functionality is turned on.
* Select your GPS device and click "continue" on the very bottom of the screen.
SEE NOTE 1 >>* You may be asked for a password - if you know the password enter it of course. Probably you don't because you didn't configure it.
SEE NOTE 1 >>o If you don't know the password, first try entering nothing (empty password) and continue.
SEE NOTE 1 >>o If that doesn't work try entering four zeroes "0000".
o Otherwise try reading the GPS devices manual or the manufacturer's web page.
SEE NOTE 2 >>* After you took that hurdle, check "serial port" as connection service - then click finish.
* Your device should now be listed on the bluetooth devices tab.
Configuring the COM port
* Go to the COM tab in the same Bluetooth system settings.
* Select "new connection".
* Select your Bluetooth GPS device.
SEE NOTE 3 >>* A COM connection will be shown "e.g. COM8", note this down, and click finish.
* Go to Start-->Settings-->GPS (or External GPS).
* Go to the "Hardware" tab and make sure that the GPS hardware connection is the COM connection you just noted down.
Check if your GPS works
* Start TomTom and configure other bluetooth device, port8
Click to expand...
Click to collapse
Sorry for the clarification/correction for the benefit of the forum users.
NOTE 1 >> So far in the years I've been using BT Devices, all of them always use password 0000.
NOTE 2 >> Serial port is only used for WIRED attachments using a Data Cable. If its BT, do not check Serial.
NOTE 3 >> COM ports are not chosen randomly. You need to know the specific port that your device uses.
@mik-
You can go to BuyGPSNow and click on Customer Service... Ask a Question... and get the exact COM port that GPSlim 240 uses.

Thx a lot all !!!!
I can now use my GPS !!!!
Here is what I did :
-Add BT device.
-When Asked for password : 0000 ====> Error
-When Asked for password : 0000 ====> Error
-When Asked for password : 0000 ====> No error
Now I can choose a "BT Service" but no service are in the list.
-Save
-In the BT devices list, choose "Edit" for the GPS.
-Go in the "BT Services" and hit "refresh 4-5 times (until the serial service is shown).
-Choose Serial
-Create a new outgoing port (com 6) without secure connection.
In external GPS,
-Choose Hardware Com 6, 38400
Use COM 6 in any GPS software.
I tried to use COM 9 for "program port", but the GPS softwares didn't find a GPS on this port. But since COM 6 works, I'm REALLY happy.
Thank you very much.

so what is the cheapest GPS unit I can buy for BA?

2 years ago I bought my JRT-29 for 35 euros on ebay
It was advertised as bluetooth GPS 42 channels and is black and probably 5cm x 5cm (or 2" x 2" if you are in the states)
It uses standard nokia phone batteries which are easy to source so a very good purchase as far as I am concerned and works with the BA

markanthonypr said:
Sorry for the clarification/correction for the benefit of the forum users.
NOTE 1 >> So far in the years I've been using BT Devices, all of them always use password 0000.
NOTE 2 >> Serial port is only used for WIRED attachments using a Data Cable. If its BT, do not check Serial.
NOTE 3 >> COM ports are not chosen randomly. You need to know the specific port that your device uses.
@mik-
You can go to BuyGPSNow and click on Customer Service... Ask a Question... and get the exact COM port that GPSlim 240 uses.
Click to expand...
Click to collapse
Hi,
Beg to differ with you:
1. I personally have a BT carkit mirror that has a pairing code of 8888, and I once had a BT headset that had the pairing code printed on a label hidden under the battery. So it is not always 0000 although most of the time it is.
2. Serial is NOT only for wired use. Older BT stacks used to use a virtual serial port for BT protocol communication and some still do. I have a Holux GPSlim 236 and the only service that shows up after I pair it is Serial.
3. The COM port used is not random, but you can pick any one that is free. I have successfully use COM6, COM7 and COM8 with the Holux connecting to IGO. You just have to make sure that you set up the same COM port in the BT settings and in the GPS program.
Personally, I dont even use the external GPS program. I set up the BT device and COM port in BT settings, then I go into the GPS program (IGO or Google Maps) and set the same settings there and it all works.
Hope this helps anybody who is having problems.

Use GPS via tablet via Bluetooth?

Is it possible to use a Touch Pro2 GPS on a laptop via bluetooth?

I wouldnt bother. You can probably get a gps reciever for your comp for pretty cheap. Then you wouldnt have to use your phone at all. Using your phone as a gps reciever and sending the signal to your laptop might run your phones battery dead faster, so if you were gonna use your phone as gps reciever, youd probly want to use usb rather than bluetooth, then the phone is charging and you have your bluetooth freed up for phone calls. But I would still suggest a reciever for your laptop, you wouldnt have to bother hooking your phone up n setting everything up every time you want to use gps
But yes i believe it is possible, Im pretty sure I saw a program for windows phones somewhere, that did send the phones gps info thru bluetooth to comp

It is called GPS2Blue and I never had any luck with it on bluetooth, but have via USB.

i just tried gps2blue again after years , now with rhodium and could get to work both tcp -> com and bluetooth -> com
WORKS GREAT with garmin on my tablet pc. and garmin-pc is even kind of made the way to use it on touch screens.
what do you have for a software?
here's what I have done:
cable:
on PC, install the Czech program called 'virtual serial port for tcp/ip'
Instructions where to get it and how to set it are here: http://users.skynet.be/hofinger/GPS2BlueFAQ.html#USB
on pda in gps2blue check TCP and choose com4 (or your gps SW EMULATED com port)
in gps program on pc choose to connect to the com port you just created with 'virtual serial port'
bluetooth:
choose com2 in gps2blue and click ON, rhodium's bluetooth manager should popup asking what to do, create a new port for your PC and go.
there is a little mess with this, it created two com2 ports on pda, till one was asking for a pairing code, the other just get connected. And is not showing them in list, or sometimes showing one, but then not showing activesync port. But nevermind. it's working.