Hi,
i got a problem with my pda whan i want to use wifi...I can' activate it :
with com manager i click on WLAN, WLAN come gray while pda is calculating and wifi come back to off ;o( same result in setting/wifi...
Did someone know this problem, a way to resolve it or a way to diagnostic it ?
Hermes history :
- originaly SPV M3100 orange with wm5 rom
- official update to wm6
- flash and unlocking to schap's wm6 pro 3.57a (1st wifi problem)
- flash to schap's wm6 pro 4.31 (same problem)
Thanks for your help
TSyst.
open you registry editor.goto HKLM>Software>HTC>CommManager>WLAN>DeviceName
open it up and make sure the end of the command is "\TIACXWLN1"
hope this helps
Hi,
tks for answer.
The regkey is in a register base and with the good end of cmd (\TIACXWLN1),
so...another idea ;o)
Tks
TSyst
Check the WAN card still has a MAC address listed, I had an issue where it dissapeared and had to hack the Rom to get it back, if that's the case have a search on here for the thread which had all the instructions to resolve it.
Hi,
How can i check if the WAN card still has a MAC address somewhere ?
Tks
hi,
following your idea of hacking rom (markafreeman) i've found this thread in the upgradinf forum : http://forum.xda-developers.com/showthread.php?t=322225
tks for help, i'll ask some details in this thread and try to apply it on my device, but it's not really clear for my poor english and a newbies like me...so...hopping evrything 'll go in the good way and to not definitivly crash my hermes
tks for idea
Tsyst.
problem resolved
Tks markafreeman, following your idea i have read the post listed above and resolved my problem Wlan is now active...
Great tks for your answer
TSyst.
Related
If you want Information and support, please go here:
forum.xda-developers.com/showthread.php?t=283594
Look in the first Posting of this thread.
Look in the first post of this thread.
Look forward to seeing the new release, and keen to see if the 'phone' issues some of us are experiencing are fixed / not there.
Thanks Ivan
Re: AKU3.2 Rom for Universal
Lt.Cmdr.Ivan said:
Bugs2 known WIFI)
WIFI error1 (1 user reported it)
Universal goes to standby mode with Wi-Fi turned on, then I switch the device on, and it starts trying to register in Wi-Fi net forever (shows "tower" but without circle and rays)
WIFI error2 (1 user reported it)
Sometimes when I close Comm Manager device draws only upper part of screen and hangs, but if you wait for about half minute, it returns to life
Click to expand...
Click to collapse
I have this errors too...
Can i fix this or wait for next beta?
New Beta 8
Hi Ivan
I see a Beta8 with today's date on it, is that the new ROM????
No its just the beta8 repacked and reuploaded, because the rar on the ftp wasn't accurately packed.
...just to be in the thread.
:wink:
for info:
at the under side of the page is a link, click to warch or stop watching this thread.... :wink:
Save contact to SIM
I'm using rc1.
Contacts/tapping any contact/Menu/Save to SIM. The last item namely "Save to SIM" is not available (grey color, not black). Looks it's necessary to change a value somewhere in registry, but I did not manage to find what and where.
Does some1 face such problem? Or there is a solution the problem? Does this bug exists in beta8?
Thx in advance
[edit]
yes, "Save to SIM" is active and works.
hi Ivan
it will hang up when synchronizing with pc some times,and will show cannot get IP from server.I use beta 8.
We want the new rom! We want the new rom !
geovass said:
We want the new rom! We want the new rom !
Click to expand...
Click to collapse
YES, YES, YES !!
Cheers
hrb
2s to universal
Hi Ivan,
I back with you! Also upgraded from 2s to universal. Will try beta 8 on weekend. Anything to watch out for as I do also use the unit for live work...
Regards,
Simon
Hi! I used the beta 6 with pleasure ;-) But now i switched back to the qtek rom - i need a german ROM. I hope ther will be a german release.
Greetings Flo
did anybody try the *ARM*CAB? (BTP). I've downloaded it, the BT manager has changed but when I search for the Universal's services on my notebook, I get only the same 3 services az before...
I tried to flash de beta8 but i get country ID error 120... i read the readme file and it says:
Q14: I get “error 120: Country id error”, what should I do?
A: It may due to you get the wrong image. Please check your device’s device name and language type and download RUU package from the vender web site again and reset your device and then run RUU again.
Has anybody had this problem..I bought my device as qtek9000 via the official vendor of HTC pda's in Holland... I bought it through my girlfriends telecom company... it comes with WM5.0 UK...
it's not simlocked..of course i just updated the radio rom from 1.9.0 to 1.13 with the tools provided by this forum.
alexei said:
I tried to flash de beta8 but i get country ID error 120... i read the readme file and it says:
Q14: I get “error 120: Country id error”, what should I do?
A: It may due to you get the wrong image. Please check your device’s device name and language type and download RUU package from the vender web site again and reset your device and then run RUU again.
Has anybody had this problem..I bought my device as qtek9000 via the official vendor of HTC pda's in Holland... I bought it through my girlfriends telecom company... it comes with WM5.0 UK...
it's not simlocked..of course i just updated the radio rom from 1.9.0 to 1.13 with the tools provided by this forum.
Click to expand...
Click to collapse
You have to use MupgradeNoid.exe
Lt.Cmdr.Ivan said:
Perfectly functioning VGA Mode (regarding to some users)
http://www.jaml.com/MvRTrueVGA/
If you have this problem:
GPRS is connected but the icon is stuck in a loop showing it trying to connect
go here:
http://forum.xda-developers.com/viewtopic.php?t=34995
************************************************************
************************************************************
Aku3.2 compatibility list:
Working
ClearVue 2.3
GSplayer 2.25
ScummVM 0.8 and 0.9
TomTom 5.21
Not working
Blackberry Connect
Special Thanks to
Mamaich
Thanks to
Bepe and friends for his Rom kitchen (This is definitely perfect)
bbs.pdafans.org (For their Rom)
Xda-developers (Knowledge and tools)
Buzzdev.net (Knowledge and tools)
Tuatara (Special tips and tools)
Sub69 (network settings for aku3.2 beta3 and 4 as testing for pushmail)
baudy2 (for compatability of the BB client)
All People submitting programs to working or non working list.
All the testers out there.
All i forgot
Click to expand...
Click to collapse
Hello there guys.
I got some version of Windows Mobile 5 on my phone working with BB Connect but was wondering if any1 released WM6 working wif BB Connect yet ???
Apologise now if this has been asked b4 but cudnt find anything.
kame1986 said:
Hello there guys.
I got some version of Windows Mobile 5 on my phone working with BB Connect but was wondering if any1 released WM6 working wif BB Connect yet ???
Apologise now if this has been asked b4 but cudnt find anything.
Click to expand...
Click to collapse
Try searching with a google advanced search - limiting your results to http://forum.xda-developers.com
Try say "BBconnect Trinity" or "Blackberry Trinity".
It's there I promise.
If its there plz point me in the rite direction. wud appreciated muchly !
will also search though.
For KAME1986
Hello,
I have just finish to upload the .cab on rapidshare.
http://rapidshare.com/files/50855639/bbconnect_wm6_pro_4.0.0.90.cab.html
Enjoy.
Private69.
@++++
could you upload not in Rapid pls..
thx
Finally i have a steady WM6 version with works with BBConnect !!
Thx
try this...working on my trin
try the steps here to get bbconnect working.
http://www.sems.org/entry.asp?ENTRY_ID=276
Graytraveler, try .84, 90 did not work for me with a stock Tytn II, but 84 did. Or I used Dutty's latest ROM from Xda-developers.com and .92 worked fine with that.
Hchickers, you can try this:
1. Hard reset.
2. Change device ID, from Start -> Settings -> System -> About -> Device ID to HTC_P3450
3. Install a registry editor, such as Resco (www.resco-net.com) or Total Commander (www.ghisler.com, I use 2.5 beta 3). Then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .0.4.2
Then soft reset and install Blackberry Connect. This method worked for some people (they weren't using 750, but still). It might work for you as well.
Click to expand...
Click to collapse
even if this isn't any help for people getting started with BBC on there trins, all new BBC updates get posted there.
p.s. If u dont have bb service from your network before!!, then bbc will never work.
I just flashed schaps rom 3.60a and now my bluetooth will not turn on. this has happened before and normally a hardreset fixes the problem but does anyone know of a way to fix it with out defaulting the device.
thanks a bunch.
it is my problem. I can't turn on the bluetooh....
i need a solution
Why don't you look in the schaps 3.60 thread?
There is no soultion right now
Just set the checkbox to be on for Bluetooth and reboot the device.
There are more eligant solutions, but you must search to find them
I will help you a bit , because you should also do something by yourself to solve it.
Look in the schap's 3.60 thread . In the last pages (5-10) there is a permanent solution by deleting some registry values about SAPsettings I think.Good luck
I don't think I ever saw a resolution to this problem, is there a solid fix to the soft reset problem exhibited by Dopod's WM6 Rom. Currently running rom version 3.00.707.18 (07/24/07)
The problem is simple, set up some IMAP devices, configure, Push Email, Pair a bluetooth device. Soft reset the device a few times and eventually one or all the settings get lost. Added email accounts get lost, Paired bluetooth device is no longer paired, ActiveSync loses the password... you get the idea
Hi,
You should try the latest ROM releases, i never had that problem again since.
I'm currently using build 18533.0.7.0 without any loss of information after a soft-reset.
Bye.
shoey5 said:
I don't think I ever saw a resolution to this problem, is there a solid fix to the soft reset problem exhibited by Dopod's WM6 Rom. Currently running rom version 3.00.707.18 (07/24/07)
The problem is simple, set up some IMAP devices, configure, Push Email, Pair a bluetooth device. Soft reset the device a few times and eventually one or all the settings get lost. Added email accounts get lost, Paired bluetooth device is no longer paired, ActiveSync loses the password... you get the idea
Click to expand...
Click to collapse
for mail account being lost after few softresets, you can try the mail account recovery software
http://nicolasmauri.blogspot.com/2007/01/wm5-utility-recover-your-lost-mail.html
it have repair after softreset feature, which give you auto repair your mail account with your provided info.
it works for me using pdaviet's rom
Hi, just tried last build 18533.0.7.0 (faman 3.6) but i have the same problem.
lost email accounts can be repared with the mailaccountrepair.exe app and works fine. But GPRS settings, wifi keys , BT paring disapear too on soft reset.
we realy need a solution/fix
regards.
Up !
all new roms cooked with the dopod official wm6 have this problem
can't find a solution, except don't soft reset...
people can live without softrest ?? lol
does this affect all new wm6 build on other phones? or just dopod's trinity rom bug?
anyway the first wm6 "leak" rom for trinity is not affected by this problem.
We allready know that!
All the rom's based on Dopod wm6, have that problem.
It is something from XIP section and not from the OS.
I have allready contact with mun_rus and ervius!
Mun_rus think's the problem is from the Dopod nk.exe.
So this is a bug found only on Trinity device's cause the fault from Dopod wm6 XIP!
All the new cooked rom's today use the XIP section from Oficiall Dopod wm6 rom's.
The only think sometimes changed in XIP section by cooker's is
coredll.dll-(From change the OS version) and
flashdrv.dll-(To merge the extended_rom)
Also sometime's edit the boot.hv and boot.rgu.
All the other file's in XIP stay the same.
The first wm6 leaked rom for trinity is not affected by this problem cause mun_rus use XIP section from ovosleep (Dont know where ovosleep found it).
Thank's
This is what I do and it really works for me:
[!] For prevent password and account dissapearing u should (you should make this procedure immidiatly after first soft reset ):
1. Set up your connection settings
2. Open IExplorer / Set up Ineternet connection / Open some internet page
3. Click Disconnect button to close internet connection
4. Hold power button and turn off your phone
5. Power on your phone.
After that procedure your password wont dissapear. I think that you should repeat the same for mail account (set up mail account / try to send or recieve your mail / hold disconnect button / turn off your phone)
dta1974 said:
This is what I do and it really works for me:
[!] For prevent password and account dissapearing u should (you should make this procedure immidiatly after first soft reset ):
1. Set up your connection settings
2. Open IExplorer / Set up Ineternet connection / Open some internet page
3. Click Disconnect button to close internet connection
4. Hold power button and turn off your phone
5. Power on your phone.
After that procedure your password wont dissapear. I think that you should repeat the same for mail account (set up mail account / try to send or recieve your mail / hold disconnect button / turn off your phone)
Click to expand...
Click to collapse
Yes this is what mun_rus say on his first wm6 release.
Maybe that help but...
In many time's after you flash a new rom and after the auto-costumization end the device auto soft reset.
So after boot again maybe you allready have corruption your registry!
Thank's for the solution but we have to focus at these problem and find the real soution!
I allready make my XIP test's but i nead help from someone to really know how.
Thank's
I know that ausdim,but that´s what I do and afterwards I clean the registry with sktools.Seems to work. ;-)
ausdim said:
Thank's for the solution but we have to focus at these problem and find the real soution!
I allready make my XIP test's but i nead help from someone to really know how.
Thank's
Click to expand...
Click to collapse
I agree, problem needs to be figured out and corrected, makes WM6 on Trinity pretty useless otherwise
Is any one to know about XIP's for help??
I upload the two xip's.bin
The one is from the first leaked wm6 for trinity and the other is from Dopod wm6.
We whant to replace the nk.exe from the new xip.bin with the old nk.exe.
Also we whant to merge the extended_rom.
Please these is very usefull for all of us couse make the trinity doesn't loose after any soft-reset tha mail acount's the wifi data and few other think's.
So if any one know (Bepe,ervius,mun_rus.....) please help.
Many thank's
i'm a bit confused.. i've tried almost every ROM for the trinity, and i've never lost my account/connection settings after soft reset...
racerx_ At you it is established SuperSid? At the some people passwords are lost, at the some people are not present. It can it is guilty?
I Am sorry for my English
no, i haven't super-cid'd... is that the cause of the problem?
I have the same problem with ADW's ROM. He suggested that I only soft reset by pressing the powerbutton and really close down the device. I now use this procedure always for a softreset and since then I did not lose any passwords or pairing info.
I agree with most of you that there is no sense of upgrading ROMs with every build release if we don't solve this BIG bug. We are releasing a rom every week but all of them buggy.
In my case I've seen that even only using PowerDown Button reseting, somehow registry corruption happens.
I don't know if someone could fix this, but in case someone does and does need some help, count with me.
I manage to port the old good xip section...
So i open a new thread to deal with that.
http://forum.xda-developers.com/showthread.php?t=342269
For now we have to build all the new rom's with that rom folder in kitchen's.
Thank's
racerx_ You have not understood - at whom is SuperSid at that passwords are lost. Who does not have SuperSid that has no such problem.
colorist said:
racerx_ You have not understood - at whom is SuperSid at that passwords are lost. Who does not have SuperSid that has no such problem.
Click to expand...
Click to collapse
Hi all,
like racerx_ I have tried many ROM and never I've lost my settings too
my device isn't SuperCid too, pheraps you must look at what SuperCid-ing a device do..
Hope this help and excuse for my english.
Bye
got it... thanks!
Hey I've just install WM6 on my HTC P3300 and the GPS stopped working at all and navigation software doesn't even know that there is internal GPS what can I do ? (I dont reall care if I have to downgrade to WM5 just tell me HOW) Thank You guys !!!
dor515 said:
Hey I've just install WM6 on my HTC P3300 and the GPS stopped working at all and navigation software doesn't even know that there is internal GPS what can I do ? (I dont reall care if I have to downgrade to WM5 just tell me HOW) Thank You guys !!!
Click to expand...
Click to collapse
Hi! tell us more about: - which country did you buy your P3300
- which ROM did you install
I have WM6 and Ibought it on the US
dor515 said:
I have WM6 and Ibought it on the US
Click to expand...
Click to collapse
Ok did you read the howto flash a ROM on ARTEMIS?
If yes you probably saw a line that told you to flash twice your P3300.
It often resolve flashing problems. GPS usually use COM4
You can test with free GPS software or with Navio software.
COM Ports
I may be wrong but I seem to have a vague recollection that in the US, the original ROMs use COM9 for GPS (can anyone confirm?). Flashing to a new rom will have changed this to COM4 so you may just need to reconfigure your GPS settings in the individual applications.
Hey thank you for a quick response but i followed the rulles how to install and its still not working after many times please i you can send me a link with the Windows mobile 5 so i will try to reinstall the original WM that came with the phone thanks anyway
dor515 said:
Hey thank you for a quick response but i followed the rulles how to install and its still not working after many times please i you can send me a link with the Windows mobile 5 so i will try to reinstall the original WM that came with the phone thanks anyway
Click to expand...
Click to collapse
Official HTC WWE WM6 SHOULD work with any P3300, that couln't be yours that is not possible to run GPS part.
There is an ARTEMIS or HTC P3300 model that have no GPS inside ? or I've just misinterpret what you said maybe you can give me a link with a refresh WM5 software the will surely work with mine ?
dor515 said:
There is an ARTEMIS or HTC P3300 model that have no GPS inside ? or I've just misinterpret what you said maybe you can give me a link with a refresh WM5 software the will surely work with mine ?
Click to expand...
Click to collapse
No, All HTC P3300 have got a GPS inside (it remember M$ pub ) only some P3300 haven't got Wifi inside.
You should forget about WM5. I said that I am pretty sure WM6 should work with your GPS.
I can give you a WM5 but it is French orange switzerland version
Was your Wm6 an original HTC WWE version?
NO its a custom something (I dont know) but for sure not an original one please if you can send me link off and World wide English official HTC manufacturing version and i would install it ASAP
Try this...
Start -> Settings -> System Tab -> Clock & Alarms
On Time tab, make sure your time AND time zone is set correctly
Start -> Settings -> System Tab -> Regional Settings
On Region tab, make sure your region is set correctly
Start -> Settings -> System Tab -> External GPS
On Program tab, make note of GPS Program Port
Download & Install VisualGPSce
http://www.visualgps.net/VisualGPSce/VisualGPSceInstall.CAB
Run Visual GPSce
Go to Connect -> Serial port
Set Port to that in "External GPS" setting above and Click OK
If the red dot in the bottom right flashes then your GPS is ok! You may just have to wait for a lock (look for QuickGPS too).
dor515 said:
NO its a custom something (I dont know) but for sure not an original one please if you can send me link off and World wide English official HTC manufacturing version and i would install it ASAP
Click to expand...
Click to collapse
Hi! Download from this link I found on XDA ARTEMIS Wiki
http://rapidshare.com/files/60087606/HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_R.exe
PS: Link of the XDA ARTEMIS Wiki : http://wiki.xda-developers.com/index.php?pagename=HTC_Artemis
Tell us if it is working after this HTC WWE release.
Hey about the GPS solution its not working it says "could not initialize communication buffer size" than when i press OK another windows pops up and says "Unable to open port please close the application accessing thecommuinication port" and i press OK and nofting change can you help me with that .... thanking you in advance!!!
dor515 said:
Hey about the GPS solution its not working it says "could not initialize communication buffer size" than when i press OK another windows pops up and says "Unable to open port please close the application accessing thecommuinication port" and i press OK and nofting change can you help me with that .... thanking you in advance!!!
Click to expand...
Click to collapse
Did you reinstall the official ROM version?
Hey when I try to install the ROM WWE after I press the update button it sends me in a white screen and than he gives me ERROR 260 means cant connect with the device what should I do
p.s. by the way my operation system is Vista so just let you know if there is any kind off significance to the subject
Darren.
When I try to install it without memory card he gives me new error after 2 percent says ''INVALID MODEL ID" this utility can't be use on your PDA ... bla bla bla ... !!! you have any king of advice hint or any kind off something helpful
Try hard reset
First you can try to hard reset your device (pressing the 2 soft key and reset at the same time) You will get a message, press the green phone button. If this does not resolve your problem... you can read first post in the forum, to learn how to flash a new ROM. Does your gps ever worked ?
dor515 said:
When I try to install it without memory card he gives me new error after 2 percent says ''INVALID MODEL ID" this utility can't be use on your PDA ... bla bla bla ... !!! you have any king of advice hint or any kind off something helpful
Click to expand...
Click to collapse
Ok, the best thing to do is to CID unlock your device (I thaught you already done that)
Read this Thread carefully it will explain why!http://forum.xda-developers.com/showthread.php?t=308242
Then use only this to CID unlock your device : http://rapidshare.com/files/119852558/Artemis_USPL.rar.html
After that reinstall the original HTC WWE ROM.
Your problems are from flashing from vista, there are a lot of threads about this, but basically you have to piss about untill you have found out how to install a bunch of old xp drivers and then no more 260 errors. When you have done that you can tell us all here just how you did it and post the drivers again because they are getting harder and harder to find.
uniqueboy said:
Your problems are from flashing from vista, there are a lot of threads about this, but basically you have to piss about untill you have found out how to install a bunch of old xp drivers and then no more 260 errors. When you have done that you can tell us all here just how you did it and post the drivers again because they are getting harder and harder to find.
Click to expand...
Click to collapse
Uniqueboy you are too funny...but the easiest way is SDCARD flashing...have a look at XDA-Artemis-Wiki http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing