Related
is there any software to lock screen for blue angel? thanks
Yes there is...
I just found an excellent program called "ScreenLock". It turns the screen off and locks all the buttons. The only way to unlock the screen is to press button 1 and button 4 together (on the XDAIIs this is the Calender and messenging buttons) or do a soft reset. This program is perfect for listening to music and also save battery life too.
The cab file is attached below. Drag it to your device and run it from there.
Hope this helps.
Dom
Cheers for this!
xdadom - top app, thanks
HPJ
Yep, leapt straight in to my "must have" list.
Fantastic little tool!
The best thing I found to do was assign it a button like the "Record" button which I never used! You can then lock the screen with one touch.
Great when playing MP3s and beats paying loads of dosh for an iPod!
Dom
There's also MortSaver
Take a look at
http://tinyurl.com/3o725
Plenty of regular updates from the author, and highly configurable.
HTH
Mark
http://www.omegaone.com/pass/default.htm
http://www.trancreative.com/nicestart.aspx
Here is 2 more
Thanks XDADOM, works on XDA1 as well.
On my QTEK 9090:
START --> Settings --> System (folder) --> Button lock
No need of 3rd party software.
Joao Caldeira
button lock doesn't work if you want to keep on playing music.
problems with screenlock
Installed screenlock on my blue angel (SX66). When I launch it from the program panel, the screen goes black and then a moment later it flashes, the black then flashes. This continues until I manage to get a screen press in during the momentary flash at which time the screen then remains on and active. Not sure what is happening, anyone else see this or am I trying to use it incorrectly.
Thanks
David
is there anyway to change the unlock key(use other key except calender and message?) how?
I think they're the only keys that you can use. I expect that they are coded into the software itself.
on my imate
START --> Settings --> System (folder) --> Button lock
never the less, good aplication
tnx
Re: problems with screenlock
dtidmore said:
Installed screenlock on my blue angel (SX66). When I launch it from the program panel, the screen goes black and then a moment later it flashes, the black then flashes. This continues until I manage to get a screen press in during the momentary flash at which time the screen then remains on and active. Not sure what is happening, anyone else see this or am I trying to use it incorrectly.
Thanks
David
Click to expand...
Click to collapse
i think you might installed it the storage card. i have same experience as you when i first time install it, you should install it to the default directory.
psShutXP
Try psShutXP, excellent freeware with lot of functionality
Do you guys use media player for playing mp3s? Cause it's pretty damn easy to configure a button to toggle the screen off. And you can still keep your buttons free for song functions like previous, next or volume up/down.
Cheers
screen lock
can anyone tell me if this is necessary on the new updated rom on xda 2s o2?
Re: screen lock
usdiver said:
can anyone tell me if this is necessary on the new updated rom on xda 2s o2?
Click to expand...
Click to collapse
Yes it is.
And it will properbli stay this way at least until WM 2005
Hi all,
A while ago I posted a message about my Bluetooth trouble with my GPS device.
I've narrowed things down to my bluetooth (either the settings, the hardware or the stack). I know for sure that there's nothing wrong with my GPS device...
The following happens:
-I turn on my phone
-I switch on Bluetooth using the Comm Manager
-I pair my GPS device
-Launch Tomtom or Route66 or Google Maps or any other GPS software I've tried
-It works perfectly for a few minutes
-Then suddenly I get the message 'GPS device not found'
-When I quit the application, I still can see the Bluetooth icon in the top bar of my homescreen
-When I enter the Comm Manager there's a red cross in the bluetooth icon, and trying to turn it on doens't work
-The blue light still blinks!!!!
-I can't enter the bluetooth settings, the device gets stuck (it hangs) for a few minutes
The only thing that works is resetting the device (turning it off and on again)
It happened in WM5 and it still happens in WM6!
Does anyone have a clue???
Sorry for my xxxth post on this subject, but I'm pretty much desperate!
TIA!
This May Help You!
Bugs74 said:
Hi all,
A while ago I posted a message about my Bluetooth trouble with my GPS device.
I've narrowed things down to my bluetooth (either the settings, the hardware or the stack). I know for sure that there's nothing wrong with my GPS device...
The following happens:
-I turn on my phone
-I switch on Bluetooth using the Comm Manager
-I pair my GPS device
-Launch Tomtom or Route66 or Google Maps or any other GPS software I've tried
-It works perfectly for a few minutes
-Then suddenly I get the message 'GPS device not found'
-When I quit the application, I still can see the Bluetooth icon in the top bar of my homescreen
-When I enter the Comm Manager there's a red cross in the bluetooth icon, and trying to turn it on doens't work
-The blue light still blinks!!!!
-I can't enter the bluetooth settings, the device gets stuck (it hangs) for a few minutes
The only thing that works is resetting the device (turning it off and on again)
It happened in WM5 and it still happens in WM6!
Does anyone have a clue???
Sorry for my xxxth post on this subject, but I'm pretty much desperate!
TIA!
Click to expand...
Click to collapse
Ok, girlfriend try this [HKEY_CURRENT_USER\Software\HTC\BTProfile] "ON"= dword:00000001 -> 0 if off! BTProfile is the new key! Babygirl, give it a shoot!
Intergalactic said:
Ok, girlfriend try this [HKEY_CURRENT_USER\Software\HTC\BTProfile] "ON"= dword:00000001 -> 0 if off! BTProfile is the new key! Babygirl, give it a shoot!
Click to expand...
Click to collapse
Thanks, hunk!
But uhhh.... Despite of my avatar, me = man...
Anyways...
I don't have that registry-key, I'll try to create one, but any idea why I don't have that key??
Create A New Key
Bugs74 said:
Thanks, hunk!
But uhhh.... Despite of my avatar, me = man...
Anyways...
I don't have that registry-key, I'll try to create one, but any idea why I don't have that key??
Click to expand...
Click to collapse
Sorry about the Gender mix up, but you will have to create a new key, Oh! the key is not in any windows device, that why you are going to create one thats works!.......!
[offtopic]
Hahaha, I just thought the lady on the avatar is sooooo damn cool!!!! She's a beauty of the eighty's (her name is Joyce Drake by the way http://rateyourmusic.com/artist/joyce_drake )
[/offtopic]
I've tried to edit my registry an add the key, but I find PHM registry editor quite confuding, so maybe I've added a wrong key or value...
So far, no succes, but I'll try another registry editor to check my editing skills!
I'll keep you posted!
Resco Smartphone Version!
Bugs74 said:
[offtopic]
Hahaha, I just thought the lady on the avatar is sooooo damn cool!!!! She's a beauty of the eighty's (her name is Joyce Drake by the way http://rateyourmusic.com/artist/joyce_drake )
[/offtopic]
I've tried to edit my registry an add the key, but I find PHM registry editor quite confuding, so maybe I've added a wrong key or value...
So far, no succes, but I'll try another registry editor to check my editing skills!
I'll keep you posted!
Click to expand...
Click to collapse
Or try Total Commander!
I have tomtom 6 on my dash with other tweaks to run it.
Go into the settings click on the "Power Management" scroll down to the "Display Time Out" and choose NEVER and then go to the "Home Screen" settings for the "Time Out" choose NEVER also. Hope this resolves your issue.
Another issue could be due to your dash/s620 not being App Unlocked.
Thanks for your reply. I'll try it first thing in the morning!
BTW, do I have to apply the app-unlock again after upgrading the ROM?
LovnGrlyGrlz said:
I have tomtom 6 on my dash with other tweaks to run it.
Go into the settings click on the "Power Management" scroll down to the "Display Time Out" and choose NEVER and then go to the "Home Screen" settings for the "Time Out" choose NEVER also. Hope this resolves your issue.
Another issue could be due to your dash/s620 not being App Unlocked.
Click to expand...
Click to collapse
What other tweaks? I'm curious!!
Intergalactic said:
Ok, girlfriend try this [HKEY_CURRENT_USER\Software\HTC\BTProfile] "ON"= dword:00000001 -> 0 if off! BTProfile is the new key! Babygirl, give it a shoot!
Click to expand...
Click to collapse
Like this?
Bugs74 said:
What other tweaks? I'm curious!!
Click to expand...
Click to collapse
i have to use a program called fake cursor and i enabled the jogg bar feature, fake cursor acts like a virtual mouse cursor so i can type in the address, choose options etc. i can use majority of the menus without it but you do need it some times, since tomtom is more for touch screen devices anyways. the joggbar i use mainly for the shortcut for the fakecursor. the bottom touch shortcut is set for the fake cursor app and the top shortcut is either tomtom or as mine is set to the fake cursor menu so i can disable it when im done.
So did it work? Another suggestion that might help, when I installed tomtom on my dads ppc and i couldnt get the blue2th gps recvr to sync properly, got really frustrated... I figured out that the my dash was the culprit, turn off any blue2th devices near you and then it worked instantly.
I posted a screenshot (post #10) to verify if I added the right settings. If I did it right, they didn't work!!
The disconnection of the bluetooth connection also appears when I'm in my car, and the only bluetooth devices there are my HTC and my GPS.
Thanks for your suggestions! I'm getting pretty desperate by now. The only thing I can try is using a different GPS device.
I'll keep you guys (& gals?) posted!
There is a BT icon at the top of my phone, all the time, 24/7 (whenever bluetooth is enabled).
If I connect A2DP or a headset, *another* icon also appears that shows the headset type.
The first icon is what I want gone. It was added when I flashed the latest NFSFan custom rom for my Vogue. The icon is not useful to me because I always have bluetooth enabled, I don't need an icon telling me as such.
It was not there in the custom ROM I flashed before this, so I know there is some way to disable it (or not add it). I just can't figure it out.
Another post on XDA said it was tied to the phone dialer skin, and indeed, if I turn off the dialer skin, the icon *goes away*, but then the dialer is busted.
I need to know what creates this icon - is it a registry key, a DLL I can replace, some combination??? I am pretty technical and am open to anything to try. No one seems to be able to answer my question in the NFSFan thread.
Bump.....
Bump.....
Sometime when i wake up TP2 i can see icon that it it charging but it is not connected to anything, after while it is normal and showing battery status, sometimes i have to sleep and wake it up again, then is it okay...
Anybody seen this issue?
Next thing is when i'm running S2U2, then i have on top icon like connected headset...? Im not using TF3D
Thanx a lot
vikino said:
Sometime when i wake up TP2 i can see icon that it it charging but it is not connected to anything, after while it is normal and showing battery status, sometimes i have to sleep and wake it up again, then is it okay...
Anybody seen this issue?
Next thing is when i'm running S2U2, then i have on top icon like connected headset...? Im not using TF3D
Thanx a lot
Click to expand...
Click to collapse
same here.... i also have a connected headset...
wonder what does that means....
s_ibiza98 said:
same here.... i also have a connected headset...
wonder what does that means....
Click to expand...
Click to collapse
Hmm, the only way i can get rit of the Headset icon is plug in a headset and then removed it, then it gone. I also noticed, the handset icon always come back again whenever I going into the S2U2 setting and then exit.
This is surely the S2U2 bug :>
As a Vogue owner, I use mine for GPS in the car, as well as being my media player, and also (obviously) as a phone.
This usage finds me frequently rotating the screen to the right, and turning on BT when I get in the car. Then when I get out, I have to undo those changes. It's a number of clicks to do this each time, and becoming something of a hassle.
I'm thinking of writing an application to automate the process. I wanted to get some feedback before I start.
1. Is anyone else interested in a project like this? (Note that this is just the beginning, additional functionality could be added, feel free to brainstorm!)
2. Is anyone who is interested in this project willing to beta-test this software?
Thanks for your input!
Shidell
Hm. I guess nobody else uses a screen flip & BT regularly as they enter/exit their vehicles? Or perhaps I'm uninformed on a better of way of doing so?
Comments/thoughts, anyone?
I would love to have a one button access to this too. On my Dream I have the power control widget. And although there is something similar for WinMo 6.5, its doesnt do the screen flip. Only Bluetooth.
I am not a developer, but I dont mind putting my Vogue up as a guinea pig!
bt
what do you use bt for? the external gps or to your stereo or monitor? My gps is internal myslf.
But otherwise yes I use mine for the exact same purpose, I would also like to output the video to my stereo monitor for larger view, audio is already working but I havent found anyway to output video either. I dont think you can on the touch vogue.
i keep BT on all the time (not discoverable though), and i used AEbutton Plus to set my camera button to rotate the screen when i hold it down.
mrono said:
i keep BT on all the time (not discoverable though), and i used AEbutton Plus to set my camera button to rotate the screen when i hold it down.
Click to expand...
Click to collapse
That would be cool, I'd be willing to beta-test for you.
mapping the camera button to screen rotate is a work around but it's just that.......a work around. I use my camera function alot as well, this would be a neat app.
Glad to see there's some interest! I figured I wasn't alone. I was also using AEButton to map a flip, but then found I would flip, turn on BT, etc. Anyhow, on to the beta.
This is simply a proof of concept to prove it works functionally. This *should* work on all Vogues (and probably most other model phones), but again, this is still a beta.
Please note that there is no installer (.cab) package right now, nor any icon, and no application settings. When you launch the application, it will determine your screen's current orientation and flip it, and it will also determine your BT's current setting and flip it. That's all this will do in it's current state.
What I need from you:
What model phone do you have (assuming Vogue?)
Did the functionality work as I described? Any problems?
How would you change/improve this application?
I am considering adding a first-run type setup to determine how you want to run the flip--IE just turn on BT (as a shortcut), etc. Ideas?
Note: As it stands right now, V15 of NFSFAN's ROM using M2D will not "flip" orientation. Titanium is fine, but M2D doesn't like the "flip" and the screen will revert to standard orientation, even though the application runs as normal and will enable/disable BT.
Simply unzip this package and place it on your phone's memory--local, SD card, it doesn't matter. Make sure you include the .exe and the .dll. Then you can run the application by clicking it. Note that you can click and hold on the app. to send a shortcut to "Programs", to make it convenient to launch.
http://www.easy-share.com/1907580543/Vehicle_Flip.zip
Thanks!
1. I copied the zip to my documents, unzipped it, made a shortcut
2. Pressed start, selected the (non-existant!!) icon
It works!!!!
I was able to flip screen orientation back and forth.
1. Manila
It also worked for me with Manila. The actual Manila doesn't like being in landscape, but it did not revert, and I used the start menu to launch TomTom and it stayed in landscape. Orientation did flip as you stated when exiting TomTom. When selecting the application again to turn off bluetooth it did, but ther orientation flipped portrait-landscape-portrait while bluetooth turned off
2. Titanium
Worked very well
I usually use 2 things in my car (at the same time), audio manager and TomTom, I launch each separately, have TT displayed, press the red home key, then use task manager to flip to audiomanager to switch a song if I want, then back to TomTom. I was able to do all of this and the screen stayed in landscape the whole time.
Not working with Manila isn't a big deal for me, M2D never has behaved well in Landscape, but some prgrams do (audiomanager, phone canvas). I also prefer the stand alone audio manager screen for in the car because the buttons are more finger friendly than the music tab on M2D.
I would make an icon for this program, and that's about it. Sometimes simplicity is the best.
My info is in my sig. You should preview and link this thread to the dev and hacking section. You'd get more notice and feedback.
Greeat Job!!!
I just have the camera button mapped to rotate screen; and if you hold down the camera button for a while, it opens the camera. Makes rotating the screen fast and easy.