I wanted to free up more device memory, but the Office 2007 CABs (I could find) would only install to the device. So I edited the CAB I had, to give you the choice (device or storage card).
It seems to work OK. The shortcuts, on the start menu, weren't pointing to the new location... but I think I have fixed that. Not sure what happens on non-english devices.
The bugbears I have found are;
Hitting the new button in Word generates an error. I think it is because the default template is in the wrong place. So if anyone can shed some light on that, I would be grateful. It's not a biggie tho' I just created a document called "blank.doc" and open that instead.
And the File Associations are pointing to the old location. I edited the registry changes in the CAB, but I screwed up (it couldn't handle the space in 'Storage Card'... hmmm). So I went back to the earlier version, and you have to edit the file associations manually. #
Is anyone willing to lend me a brain cell here?
I'm sure someone will come along now and say, "there is already a CAB that does this".... but I did spend two days looking for one!
Here it is anyway,
LINK REMOVED, see the much better CAB below
gadgetuk437 said:
I'm sure someone will come along now and say, "there is already a CAB that does this".... but I did spend two days looking for one!
Click to expand...
Click to collapse
your right my brother
similar cab has available on my 4shared at my signature
and his cab works perfectly I might add
MrDSL said:
and his cab works perfectly I might add
Click to expand...
Click to collapse
and it has in addition AdobeReader LE and Notepad included, if I may add
thank you anyway for your offer and to Abusalza also for sure
@ MrDSL and farres,
which one are you referring.....the one posted here or abusalza's?
dinoalbert said:
@ MrDSL and farres,
which one are you referring.....the one posted here or abusalza's?
Click to expand...
Click to collapse
they are talking about our chef's office cab my friend
ah okay...will check out his folder then
thanks..
MrDSL said:
and his cab works perfectly I might add
Click to expand...
Click to collapse
I think he means this one,
http://www.4shared.com/file/55837778/39d36bc2/PDACorner_Office2007.html?dirPwdVerified=10fcd677
Thanks for the headzup on that one... saves me a lot of bother!
edit: mistaken for the hacking/development forum.
wich one?
The one that say..... (SC) or the one that dont say (SC)... PDACorner_office2007.rar
Office in Storage Card? it must be good... anyone that can be sure of wich one is the correct one?
+ Que PPC said:
The one that say..... (SC) or the one that dont say (SC)... PDACorner_office2007.rar
Office in Storage Card? it must be good... anyone that can be sure of wich one is the correct one?
Click to expand...
Click to collapse
This one,
http://www.4shared.com/file/55837778/39d36bc2/PDACorner_Office2007.html?dirPwdVerified=10fcd677
How can i uninstall Ofice2007 from my phone mates?Thanks in advance.
Thanks men!!!
gadgetuk437 said:
This one,
http://www.4shared.com/file/55837778/39d36bc2/PDACorner_Office2007.html?dirPwdVerified=10fcd677
Click to expand...
Click to collapse
Thanks a lot!!
The one that dont say (SC)
@[email protected] said:
How can i uninstall Ofice2007 from my phone mates?Thanks in advance.
Click to expand...
Click to collapse
Anyone can help me out mates????
@[email protected] said:
How can i uninstall Ofice2007 from my phone mates?Thanks in advance.
Click to expand...
Click to collapse
there are 3 cases for for software on PDA devices:
applications that are cooked with the ROM installed on your device (in this situation you can not uninstall these applications)
applications that installed as a part of the post-flash customization.
applications that you install yourself
for the 2nd and 3rd situation you may go to "Settings/[Tab: System] Remove Programs" if you want to know which programs are installed on your device and from there you can uninstall the programs that you don't need.
I hope this was a kind of useful for you and it answered your question.
Thanks for replay mate,my case is # applications that are cooked with the ROM installed on your device (in this situation you can not uninstall these applications)so,can't do anything.
@[email protected];2839342 said:
,my case is applications are cooked with the ROM installed on device (in this situation you can not uninstall these applications)so,can't do anything.
Click to expand...
Click to collapse
other than changing to another ROM (without Office cooked in)... there's a fair choice!
I'll just point out that this cab breaks the finger friendly menus in 6.5.3 File Explorer...
Related
Hi Guys
I have copied all the T-Mob customisations out, but have not uploaded them to the FTP, if you need them pls IM and I will send them to you.
This is not just the ExtROM, this includes the customisation cab that they have planted in the Windows folder too, inc XML files.
Hope you find them useful.
I would find these very useful.
Any chance you could put on rapidshare or the like.
Stu
Oh god yes! I upped to WM6 without thinking this through, just days before selling on my Vario2. I don't think I'll have to much problem putting my 'Phone on ebay with WM6 on it but I'm sure it will be be less 'saleable' without the T-Mobile look'n'feel.
Please PM/email me!
Jygar said:
Hi Guys
I have copied all the T-Mob customisations out, but have not uploaded them to the FTP, if you need them pls IM and I will send them to you.
This is not just the ExtROM, this includes the customisation cab that they have planted in the Windows folder too, inc XML files.
Hope you find them useful.
Click to expand...
Click to collapse
Hi, I'd also love a copy of this please if you could PM me!
Thanks very much
me three!
Hi dude, any chance of the link as well. Cheers
Lots of messages, added to MegaUpload:
T-Mobile Customisation Cabs
Hi, I'm new at this so I was wondering how do I do this as I have putthe files on my storage card clicked the autorun and nothing has changed.
londonmandan said:
Hi, I'm new at this so I was wondering how do I do this as I have putthe files on my storage card clicked the autorun and nothing has changed.
Click to expand...
Click to collapse
Anyone know how to do this yet?
Just click the files
londonmandan said:
Hi, I'm new at this so I was wondering how do I do this as I have putthe files on my storage card clicked the autorun and nothing has changed.
Click to expand...
Click to collapse
If you are of a mind to, the easy way is to use WinRar to inpack the bundle into a folder on your comptuer with the phone synced using ActiveSync. Then run the autorun's. The second option is to put only the cabs that you want to use on the storage card and, one at a time, click on them and they will individually install on your device.
Either way should work. I hope this is helpful.
Hi ,
I have been trying different vesion of Comm Manager on X01HT, most of them are good and installation without problem. When I tried to install the schen 10 button version, sys said no premission or something like that , So I kept reading the thread and then I found and installed the "sdkcerts.cab" (from the same thread), after that, install this 10 button Comm Manager and it could be installed this time.
So I am wondering what is this sdkcerts.cab?
What's the function of it?
I am a bit confused. Hope someone could explain it to me. thanks a lot guys!
kinghung said:
Hi ,
I have been trying different vesion of Comm Manager on X01HT, most of them are good and installation without problem. When I tried to install the schen 10 button version, sys said no premission or something like that , So I kept reading the thread and then I found and installed the "sdkcerts.cab" (from the same thread), after that, install this 10 button Comm Manager and it could be installed this time.
So I am wondering what is this sdkcerts.cab?
What's the function of it?
I am a bit confused. Hope someone could explain it to me. thanks a lot guys!
Click to expand...
Click to collapse
SDK Cert is a certificate used by the developers or programmers to sign the file/s you're using to make it/them eligible to be installed on the device. It's just like a consent from the developers for their OEM softwares to their users. To make the device accepts the file/s, the SDKCert have to be installed on the device for key matching purposes.
cyphol said:
SDK Cert is a certificate used by the developers or programmers to sign the file/s you're using to make it/them eligible to be installed on the device. It's just like a consent from the developers for their OEM softwares to their users. To make the device accepts the file/s, the SDKCert have to be installed on the device for key matching purposes.
Click to expand...
Click to collapse
Thanks so much for your description,
is this sdk certs an universial file? or specific for a particular program (unique) to install?
For example, if I have 2 program A and B need to install sdk certs, do I need to install one for A and the other for B program? or just install one and then not need to install anymore?
Sorry for my stupid questions
kinghung said:
Thanks so much for your description,
is this sdk certs an universial file? or specific for a particular program (unique) to install?
For example, if I have 2 program A and B need to install sdk certs, do I need to install one for A and the other for B program? or just install one and then not need to install anymore?
Sorry for my stupid questions
Click to expand...
Click to collapse
Install once only.
cyphol said:
Install once only.
Click to expand...
Click to collapse
Thanks mate!
What would happen if you installed it more than once?
ericc191 said:
What would happen if you installed it more than once?
Click to expand...
Click to collapse
Doesn't matter at all.
And what if I don't want to use it later? I installed SDKcerts to write one read-only file and now I want my WM6 to be idiot-proof again How to unistall SDKcerts?
hello sir, im new here..my question is where can i download sdkcert 1st.cab for my htc. thank you
Hi everybody!
I have a question: can I savely uninstall the "sdkcerts" after I installed the programms which need sdkcerts (Pro2 Notification Manager and Spike's MicNeo TaskBar Varients)? Or does these programms need the sdkcerts to run on my device?
In advance: thanx for the reply
Greetz,
Michael
Almost all has them
almost all the roms has sdkcerts by default! sometimes it doesnt works so good so the cab must be installed again... only once... if you try to install something and has no permisions intall this sdkcerts and then your new app.... it doenst works... maybe is wrong cooked
for taskbar yes! its needed! to change the dll!
want the sdkcerts cab... search...
Thnx for your reply.
As I wrote in my post, I already installed the sdkcerts.cab and the programms (pro2 notification manager and the stuff from spike).
But my question is: do I have to let it (sdkcerts) on my device or can I uninstall it when the programms are running?
Greetz,
Michaël
michael.neuburger said:
Thnx for your reply.
As I wrote in my post, I already installed the sdkcerts.cab and the programms (pro2 notification manager and the stuff from spike).
But my question is: do I have to let it (sdkcerts) on my device or can I uninstall it when the programms are running?
Greetz,
Michaël
Click to expand...
Click to collapse
Michael, I know this is a slightly old post but did you ever find the answer to your question? I too have been searching for ways to uninstall/remove installed SDKcerts WITHOUT having to perform a Hard Reset.
If you or anyone can answer this or help point me in the right direction, I'd appreciate it.
Thanks a bunch!
Len
escapism2to1 said:
Michael, I know this is a slightly old post but did you ever find the answer to your question? I too have been searching for ways to uninstall/remove installed SDKcerts WITHOUT having to perform a Hard Reset.
If you or anyone can answer this or help point me in the right direction, I'd appreciate it.
Thanks a bunch!
Len
Click to expand...
Click to collapse
this post contains and install and uninstall cab. I haven't tried it yet.
Thanks!
fortunz said:
this post contains and install and uninstall cab. I haven't tried it yet.
Click to expand...
Click to collapse
This is great news...thanks for the help! I've not tried it yet but will post if I run into any problems.
escapism2to1 said:
This is great news...thanks for the help! I've not tried it yet but will post if I run into any problems.
Click to expand...
Click to collapse
You're welcome. I've tried it since making the above post, and it appears to work. Upon uninstall of the sdkcerts, programs with drivers requiring sdk certs won't function anymore.
...deleted.
MyRho said:
...deleted.
Click to expand...
Click to collapse
Michael, dude you are awesome, you made my day.. i did excatly you said and works fine on my tilt2 phone off the hook bro..
Regds,
RAnkit
Tilt 2 (Using Singapore Signed ROM)
new version and 3d here:
http://forum.xda-developers.com/showthread.php?t=373677
Thanks Ervius,
downloading...
pampito said:
Thanks Ervius,
downloading...
Click to expand...
Click to collapse
and....
if you find other bugs, I try to solve them,
but the ones by HTC Home was terrible..... 6 or 7 mb in memory waste all....
hopeing they' ll solve this big iusse in a next release.....
....... It is not perfect ... he does not make the coffee! I want a rom which prepares the coffee! ERVIUS thanks
marco3254 said:
....... It is not perfect ... he does not make the coffee! I want a rom which prepares the coffee! ERVIUS thanks
Click to expand...
Click to collapse
I'm juts preparing an utility fot that....
wait...
I've just installed it, everything works fine except the Touchpad, it doesn't show up when I change from keyboard to phonepad. I didn't install anything on the PDA yet.
hi ervius i installed your last relase ican say tha previus was better this cometimes ave lock and i lose all controll of my device need soft reset
sip change don't work with pcmkeyboard also if i put the dll. into windows
marcosorano said:
hi ervius i installed your last relase ican say tha previus was better this cometimes ave lock and i lose all controll of my device need soft reset
sip change don't work with pcmkeyboard also if i put the dll. into windows
Click to expand...
Click to collapse
I had a device lock too while using the TouchFlo and needed to reset.
marty_73 said:
I had a device lock too while using the TouchFlo and needed to reset.
Click to expand...
Click to collapse
never seen this problem, for keypad, I made other hard reset and now works, this one is really a mistery for me....
no solution in mind for it...
Hi ervius... where can I find some more info about sdconfig? I'd like to know how to configure it, if I can install apps into main memory too, modify settings, add registry keys...
GDT said:
Hi ervius... where can I find some more info about sdconfig? I'd like to know how to configure it, if I can install apps into main memory too, modify settings, add registry keys...
Click to expand...
Click to collapse
there is a package somewhere, about cabs.... only insert into sdconfig\ folder into storage card, for registry tweak, you must learn about provxml files...
bye!!!
ervius said:
there is a package somewhere, about cabs.... only insert into sdconfig\ folder into storage card, for registry tweak, you must learn about provxml files...
bye!!!
Click to expand...
Click to collapse
And where will the cabs be installed? Into SD Card, into main memory or I can choose it?
GDT said:
And where will the cabs be installed? Into SD Card, into main memory or I can choose it?
Click to expand...
Click to collapse
there is apposite 3d about
http://forum.xda-developers.com/showthread.php?t=372309
Another great work, sdconfig is a very great idea. I have flashed and all work fine but I have a little question: with your weather configurator is possible change between Celsius and Farenhait ? It's necessary for MeteoRay.
Thanks.
mar_60 said:
Another great work, sdconfig is a very great idea. I have flashed and all work fine but I have a little question: with your weather configurator is possible change between Celsius and Farenhait ? It's necessary for MeteoRay.
Thanks.
Click to expand...
Click to collapse
no, only celsius, but we can update it, only, tel me what uou need!!
bye!
MeteoRay software display properly temperature only with Fahrenheit grads in settings otherwise it display temperature in Fahrenheit instead Celsius.
Ciao.
chiamata vocale
I have not "chiamata vocale"
ABOUT THE PHONEPAD BUG: I did a hard reset, the Phonepad worked for a few minutes, then it stopped to work after a soft reset, maybe the bug appears after you get into the SIP properties.
Hi, can someone tell me which is the plugin (and where I can take it) that add the thin line of the battery status on the top of the screen.
Thanks
Bye
actarus999 said:
Hi, can someone tell me which is the plugin (and where I can take it) that add the thin line of the battery status on the top of the screen.
Thanks
Bye
Click to expand...
Click to collapse
batterygauge.... here:
Hello,
This new rom i780MSHC3 includes a new "mouse" driver that supports and press and hold function that simulates the right click menus, etc. My question is that if someone could extract the new mouse drivers and make a cab file or something?
This because i have a portuguese rom with specific service provider settings and utilities which, for now i dont want to loose. Also the rom i have supports the hard reset function which is very important in case of a disaster and is something i definitely don't want to loose.
Thanks,
OliveiraJMR
Joao Oliveira said:
Hello,
This new rom i780MSHC3 includes a new "mouse" driver that supports and press and hold function that simulates the right click menus, etc. My question is that if someone could extract the new mouse drivers and make a cab file or something?
This because i have a portuguese rom with specific service provider settings and utilities which, for now i dont want to loose. Also the rom i have supports the hard reset function which is very important in case of a disaster and is something i definitely don't want to loose.
Thanks,
OliveiraJMR
Click to expand...
Click to collapse
Hi. I´m in the same situation has Joao Oliveira.
Anyone could make a cab with the new mouse driver?
thanks a lot
Nuno
Lets keep trying
Come on people...
Can someone please try to extract the new mouse that has the new feature of press and holding.....
lets keep this thread alive
Joao Oliveira.
Yes, this would be usefull to many people out there
Best regards,
LoGiKZ
bump please
some one who already has a dumped rom .. plz create a cab with the new mouse files
thanks
i guess no one will do it...
can anyone help us to get this driver ?
Hello,
Any news on this??????
Still waitnig?
REaly no one has idea how to do that???
regards,
MB
dzikunek said:
Still waitnig?
REaly no one has idea how to do that???
regards,
MB
Click to expand...
Click to collapse
Try this.
Take the new mouse driver (mouse.dll), rename it as mouse-new.dll and put it in the \windows directory.
Use a registry editor and change all the mouse.dll values in mouse-new.dll, then softreset the device and see what happens.
Samsung SGH-I780 - i780MSHC3 mouse driver? Reply to Thread
The Solutor said:
Try this.
Take the new mouse driver (mouse.dll),
Click to expand...
Click to collapse
but where can i get it?
I've tried to use kitchen with rom file but I think I am not enough educated to use this tool.
hope you'll help... many people here will be happy
regards,
dzikunek said:
but where can i get it?
I've tried to use kitchen with rom file but I think I am not enough educated to use this tool.
hope you'll help... many people here will be happy
regards,
Click to expand...
Click to collapse
This is from the latest rom
The Solutor said:
Try this.
Use a registry editor and change all the mouse.dll values in mouse-new.dll, then softreset the device and see what happens.
Click to expand...
Click to collapse
Another "success-breaker":
I am using Mobile Registry Editor, and
1. I can find only touch.dll i HKLM\HARDWARE\DEVICEMAP\TOUCH. I can't find mouse.dll in the registry at all.
2. Any way: I can't make changes there... "Access denied message apears.."
Please Solutor! Don't give me up!
dzikunek said:
Another "success-breaker":
I am using Mobile Registry Editor, and
1. I can find only touch.dll i HKLM\HARDWARE\DEVICEMAP\TOUCH. I can't find mouse.dll in the registry at all.
2. Any way: I can't make changes there... "Access denied message apears.."
Please Solutor! Don't give me up!
Click to expand...
Click to collapse
I fixed #2 using Resco, but i still cannot find mouse.dll on my device
Another point:
3. I took touch.dll from rom i780MSHC3_UKENG_PDA and when I place it into device my touchpad dies at all (both stylus and touchpad)
regards,
realy?
realy no one can help?
Solutor, even you?
reg.
dzikunek said:
realy no one can help?
Solutor, even you?
reg.
Click to expand...
Click to collapse
I' have posted a coocked rom with the new and old drivers but seem tath noone has tried to see if it helps.
http://forum.xda-developers.com/showpost.php?p=2772920&postcount=55
The rom is an italian one, but if it works I can do WWE olmouse edition, very quickly.
mouse.dll
But any way, what if I have no mouse.dll on my ROM?
There is nothing to change, except touch.dll...
I am wondering if it is possible at all to change the driver without changing all ROM, what you think Solutor?
regards,
how do i install this mouse driver on my Touch Pro and Samsung i730 with wm6.
bump please......
hi folks, i've found out recently that Swype v3.9.10.10.5032
(the HD2 version) has been cabbed up for use on any(w)vga device.
i've been having a hell of a job trying to convert the cab to an EXT but it keeps failing
i'd be very grateful if someone would be willing to post a working ext for this new version?
many thanks in advance for any help
Chris
chrisd1a1 said:
hi folks, i've found out recently that Swype v3.9.10.10.5032
(the HD2 version) has been cabbed up for use on any(w)vga device.
i've been having a hell of a job trying to convert the cab to an EXT but it keeps failing
i'd be very grateful if someone would be willing to post a working ext for this new version?
many thanks in advance for any help
Chris
Click to expand...
Click to collapse
hi chris
i can make it work for you if yo uhave the cab for me
one other thing though can you help me out whit something?
i am loking for al vga ext packages
i have found a thread whit manilla packs ported to vga but only manill packs arent enough
can you help me on all ext packages that will work whit sense 2012
best regards
chris
miniterror said:
hi chris
i can make it work for you if yo uhave the cab for me
one other thing though can you help me out whit something?
i am loking for al vga ext packages
i have found a thread whit manilla packs ported to vga but only manill packs arent enough
can you help me on all ext packages that will work whit sense 2012
best regards
chris
Click to expand...
Click to collapse
the swype cab is available below (us english only)
http://forum.ppcgeeks.com/showthread.php?t=101376
i'm assuming you mean just the base sense packages you need?
i'm happy to upload to my 4shared and post a link for you but they are also available in the post below
http://forum.xda-developers.com/showpost.php?p=5635954&postcount=2
you need the vga, wvga and the required packages.
instructions on how to cook in are in the post below
http://forum.xda-developers.com/showpost.php?p=5636160&postcount=6
hope this helps
hi chris
i will downlaod it and make it tomorow for you if you are alright whit it as it is 23:15 here and the misses wants me gone from the computer
as for the packages i mean every package
not only manilla packs but the entire ext packages
also all cm packages all htc packages
i need everything
i downloaded a kitchen from deepshinning and i know how to make roms as i make my own for my blackstone
although it is 23017 its not a problem ill update it to 21895 myself(this isnt the problem
the problem is i cant find any up to date ext packages except the manilla packs:S
and as a cook you know there are way more ext packages besides the manilla packs
so can you provide me whit all ext packages to make a full sense 2012 vga rom
best regards
chris
couldnt help myself
see attachment this should work
dont forget you need to add lines to youre initflash.dat to make swype work
miniterror said:
couldnt help myself
see attachment this should work
dont forget you need to add lines to youre initflash.dat to make swype work
Click to expand...
Click to collapse
many thanks, specifically what do i need to add. i'll upload my packages to 4shared and post the link tomorow
cheers again
Chris
ok the sense packages are in a zip file below
http://www.4shared.com/file/246352120/ca008eb6/upload_files.html
unzip and add all of them to EXT>Diamond>common
the ereader and footprints are not needed as they are not ported or working fully yet.
enable them all and you should be up and running.
any other packages are optional and down to the individual
i would suggest using l3v5y's kitchens. very stable and easy to use.
i'm going to be upgrading my phone in a few weeks so will think about uploading and posting my kitchen at that stage. look out for it
regards
Chris
chrisd1a1 said:
ok the sense packages are in a zip file below
http://www.4shared.com/file/246352120/ca008eb6/upload_files.html
unzip and add all of them to EXT>Diamond>common
the ereader and footprints are not needed as they are not ported or working fully yet.
enable them all and you should be up and running.
any other packages are optional and down to the individual
i would suggest using l3v5y's kitchens. very stable and easy to use.
i'm going to be upgrading my phone in a few weeks so will think about uploading and posting my kitchen at that stage. look out for it
regards
Chris
Click to expand...
Click to collapse
hey chris
thank you verry much for uploading it
this is gonna save me alot of time
as for what t add to initflash.dat ill have to come back to teel you that as i have read that swype must be added to initflash but im not sure what to add
as i dont use swype
luckily there is a kitchen uploaded in the blackstone kitchen whit swype in it
so ill check it out there if its in
otherwise i know the person who wrote it and we swich pm so i could ask him what to add
so i can tell you what to add but give me a little time
best regards
chris
miniterror said:
hey chris
thank you verry much for uploading it
this is gonna save me alot of time
as for what t add to initflash.dat ill have to come back to teel you that as i have read that swype must be added to initflash but im not sure what to add
as i dont use swype
luckily there is a kitchen uploaded in the blackstone kitchen whit swype in it
so ill check it out there if its in
otherwise i know the person who wrote it and we swich pm so i could ask him what to add
so i can tell you what to add but give me a little time
best regards
chris
Click to expand...
Click to collapse
many thanks
and here it is
i dont know f it works right for you as vga as some thing say wvga
you can always try and otherwise i have looked in the app.dat file that is in the 0409 folder
it looks the same so you could also use that entire entry i think
one other thing
i loked at the packages and for example there isnt a youtube package in
you think i can use the youtube package i have in my wvga kitchen?
best regards
chris
;***IME_SWYPE***
Directory("\Windows\"):-Directory("Swype")
Directory("\Windows\Swype\"):-Directory("Azerty_LS")
Directory("\Windows\Swype\"):-Directory("Azerty_PT")
Directory("\Windows\Swype\"):-Directory("Qwertz_LS")
Directory("\Windows\Swype\"):-Directory("Qwertz_PT")
Directory("\Windows\Swype\"):-Directory("SwypeRef_LS")
Directory("\Windows\Swype\"):-Directory("SwypeRef_LS_Editing")
Directory("\Windows\Swype\"):-Directory("SwypeRef_LS_Numeric")
Directory("\Windows\Swype\"):-Directory("SwypeRef_PT")
Directory("\Windows\Swype\"):-Directory("SwypeRef_PT_Editing")
Directory("\Windows\Swype\"):-Directory("SwypeRef_PT_Numeric")
Directory("\Windows\Swype"):-File("SwypeArrowLeft_Blue.bmp","\Windows\SwypeArrowLeft_Blue.bmp")
Directory("\Windows\Swype"):-File("SwypeAzerty-LS-Latin1.zkb.le","\Windows\SwypeAzerty-LS-Latin1.zkb.le")
Directory("\Windows\Swype"):-File("SwypeAzerty-PT-Latin1.zkb.le","\Windows\SwypeAzerty-PT-Latin1.zkb.le")
Directory("\Windows\Swype"):-File("SwypeBasicWCL.bmp","\Windows\SwypeBasicWCL.bmp")
Directory("\Windows\Swype"):-File("SwypeBlueKey.bmp","\Windows\SwypeBlueKey.bmp")
Directory("\Windows\Swype"):-File("SwypeButtonWatchVideo.bmp","\Windows\SwypeButtonWatchVideo.bmp")
Directory("\Windows\Swype"):-File("SwypeCafeWCL.bmp","\Windows\SwypeCafeWCL.bmp")
Directory("\Windows\Swype"):-File("Swypecancel_VGA.png","\Windows\Swypecancel_VGA.png")
Directory("\Windows\Swype"):-File("SwypeCapitalization.bmp","\Windows\SwypeCapitalization.bmp")
Directory("\Windows\Swype"):-File("SwypeComma.bmp","\Windows\SwypeComma.bmp")
Directory("\Windows\Swype"):-File("SwypeEdit-LS-Latin1.zkb.le","\Windows\SwypeEdit-LS-Latin1.zkb.le")
Directory("\Windows\Swype"):-File("SwypeEdit-PT-Latin1.zkb.le","\Windows\SwypeEdit-PT-Latin1.zkb.le")
Directory("\Windows\Swype"):-File("SwypeEnglishUS.htm","\Windows\SwypeEnglishUS.htm")
Directory("\Windows\Swype"):-File("SwypeEnglishUS.zdb.le","\Windows\SwypeEnglishUS.zdb.le")
Directory("\Windows\Swype"):-File("SwypeFastSloppy.bmp","\Windows\SwypeFastSloppy.bmp")
Directory("\Windows\Swype"):-File("SwypeFrench.htm","\Windows\SwypeFrench.htm")
Directory("\Windows\Swype"):-File("SwypeFrench.zdb.le","\Windows\SwypeFrench.zdb.le")
Directory("\Windows\Swype"):-File("SwypeFullLogo.bmp","\Windows\SwypeFullLogo.bmp")
Directory("\Windows\Swype"):-File("SwypeGerman.htm","\Windows\SwypeGerman.htm")
Directory("\Windows\Swype"):-File("SwypeGerman.zdb.le","\Windows\SwypeGerman.zdb.le")
Directory("\Windows\Swype"):-File("SwypeInfoIcon.bmp","\Windows\SwypeInfoIcon.bmp")
Directory("\Windows\Swype"):-File("SwypeInfoIconFlashBig_Blink.png","\Windows\SwypeInfoIconFlashBig_Blink.png")
Directory("\Windows\Swype"):-File("SwypeInfoIconFlashBig_Normal.png","\Windows\SwypeInfoIconFlashBig_Normal.png")
Directory("\Windows\Swype"):-File("SwypeInfoIconFlash_Blink.png","\Windows\SwypeInfoIconFlash_Blink.png")
Directory("\Windows\Swype"):-File("SwypeInfoIconFlash_Normal.png","\Windows\SwypeInfoIconFlash_Normal.png")
Directory("\Windows\Swype"):-File("SwypeIntroVideo.wmv","\Windows\SwypeIntroVideo.wmv")
Directory("\Windows\Swype"):-File("SwypeItalian.htm","\Windows\SwypeItalian.htm")
Directory("\Windows\Swype"):-File("SwypeItalian.zdb.le","\Windows\SwypeItalian.zdb.le")
Directory("\Windows\Swype"):-File("SwypeKey.bmp","\Windows\SwypeKey.bmp")
Directory("\Windows\Swype"):-File("SwypeLicense","\Windows\SwypeLicense")
Directory("\Windows\Swype"):-File("SwypeLogo.bmp","\Windows\SwypeLogo.bmp")
Directory("\Windows\Swype"):-File("SwypeLogoIcon.png","\Windows\SwypeLogoIcon.png")
Directory("\Windows\Swype"):-File("Swypemore_VGA.png","\Windows\Swypemore_VGA.png")
Directory("\Windows\Swype"):-File("SwypeNoSpaceKey.bmp","\Windows\SwypeNoSpaceKey.bmp")
Directory("\Windows\Swype"):-File("SwypeNoSpaceOverlay.png","\Windows\SwypeNoSpaceOverlay.png")
Directory("\Windows\Swype"):-File("SwypeNumbers-LS-Latin1.zkb.le","\Windows\SwypeNumbers-LS-Latin1.zkb.le")
Directory("\Windows\Swype"):-File("SwypeNumbers-PT-Latin1.zkb.le","\Windows\SwypeNumbers-PT-Latin1.zkb.le")
Directory("\Windows\Swype"):-File("SwypePeriod.bmp","\Windows\SwypePeriod.bmp")
Directory("\Windows\Swype"):-File("SwypePool.bmp","\Windows\SwypePool.bmp")
Directory("\Windows\Swype"):-File("Swypeprev_VGA.png","\Windows\Swypeprev_VGA.png")
Directory("\Windows\Swype"):-File("SwypePut.bmp","\Windows\SwypePut.bmp")
Directory("\Windows\Swype"):-File("SwypeQuestionMark.bmp","\Windows\SwypeQuestionMark.bmp")
Directory("\Windows\Swype"):-File("SwypeQwerty-LS-Latin1.zkb.le","\Windows\SwypeQwerty-LS-Latin1.zkb.le")
Directory("\Windows\Swype"):-File("SwypeQwerty-PT-Latin1.zkb.le","\Windows\SwypeQwerty-PT-Latin1.zkb.le")
Directory("\Windows\Swype"):-File("SwypeQwertz-LS-Latin1.zkb.le","\Windows\SwypeQwertz-LS-Latin1.zkb.le")
Directory("\Windows\Swype"):-File("SwypeQwertz-PT-Latin1.zkb.le","\Windows\SwypeQwertz-PT-Latin1.zkb.le")
Directory("\Windows\Swype"):-File("SwypeReturnKeyIcon.png","\Windows\SwypeReturnKeyIcon.png")
Directory("\Windows\Swype"):-File("SwypeScreen.ini","\Windows\SwypeScreen.ini")
Directory("\Windows\Swype"):-File("SwypeSpanish.htm","\Windows\SwypeSpanish.htm")
Directory("\Windows\Swype"):-File("SwypeSpanish.zdb.le","\Windows\SwypeSpanish.zdb.le")
Directory("\Windows\Swype"):-File("SwypeThe.bmp","\Windows\SwypeThe.bmp")
Directory("\Windows\Swype"):-File("Swypewcw_divider_ls_VGA.png","\Windows\Swypewcw_divider_ls_VGA.png")
Directory("\Windows\Swype"):-File("Swypewcw_left_ls_VGA.png","\Windows\Swypewcw_left_ls_VGA.png")
Directory("\Windows\Swype"):-File("Swypewcw_left_pt_VGA.png","\Windows\Swypewcw_left_pt_VGA.png")
Directory("\Windows\Swype"):-File("Swypewcw_middle_ls_VGA.png","\Windows\Swypewcw_middle_ls_VGA.png")
Directory("\Windows\Swype"):-File("Swypewcw_middle_pt_VGA.png","\Windows\Swypewcw_middle_pt_VGA.png")
Directory("\Windows\Swype"):-File("Swypewcw_popup_left_VGA.png","\Windows\Swypewcw_popup_left_VGA.png")
Directory("\Windows\Swype"):-File("Swypewcw_popup_middle_VGA.png","\Windows\Swypewcw_popup_middle_VGA.png")
Directory("\Windows\Swype"):-File("Swypewcw_popup_right_VGA.png","\Windows\Swypewcw_popup_right_VGA.png")
Directory("\Windows\Swype"):-File("Swypewcw_right_ls_VGA.png","\Windows\Swypewcw_right_ls_VGA.png")
Directory("\Windows\Swype"):-File("Swypewcw_right_pt_VGA.png","\Windows\Swypewcw_right_pt_VGA.png")
Directory("\Windows\Swype\Azerty_LS"):-File("Azerty_LS_Blue_Shifted_WVGA.png","\Windows\Azerty_LS_Blue_Shifted_WVGA.png")
Directory("\Windows\Swype\Azerty_LS"):-File("Azerty_LS_Blue_WVGA.png","\Windows\Azerty_LS_Blue_WVGA.png")
Directory("\Windows\Swype\Azerty_LS"):-File("Azerty_LS_Standard_CapsLock_wBlue_WVGA.png","\Windows\Azerty_LS_Standard_CapsLock_wBlue_WVGA.png")
Directory("\Windows\Swype\Azerty_LS"):-File("Azerty_LS_Standard_Shifted_wBlue_WVGA.png","\Windows\Azerty_LS_Standard_Shifted_wBlue_WVGA.png")
Directory("\Windows\Swype\Azerty_LS"):-File("Azerty_LS_Standard_wBlue_WVGA.png","\Windows\Azerty_LS_Standard_wBlue_WVGA.png")
Directory("\Windows\Swype\Azerty_PT"):-File("Azerty_PT_Blue_Shifted_VGA.png","\Windows\Azerty_PT_Blue_Shifted_VGA.png")
Directory("\Windows\Swype\Azerty_PT"):-File("Azerty_PT_Blue_VGA.png","\Windows\Azerty_PT_Blue_VGA.png")
Directory("\Windows\Swype\Azerty_PT"):-File("Azerty_PT_Standard_CapsLock_wBlue_VGA.png","\Windows\Azerty_PT_Standard_CapsLock_wBlue_VGA.png")
Directory("\Windows\Swype\Azerty_PT"):-File("Azerty_PT_Standard_Shifted_wBlue_VGA.png","\Windows\Azerty_PT_Standard_Shifted_wBlue_VGA.png")
Directory("\Windows\Swype\Azerty_PT"):-File("Azerty_PT_Standard_wBlue_VGA.png","\Windows\Azerty_PT_Standard_wBlue_VGA.png")
Directory("\Windows\Swype\Qwertz_LS"):-File("Qwertz_LS_Blue_Shifted_WVGA.png","\Windows\Qwertz_LS_Blue_Shifted_WVGA.png")
Directory("\Windows\Swype\Qwertz_LS"):-File("Qwertz_LS_Blue_WVGA.png","\Windows\Qwertz_LS_Blue_WVGA.png")
Directory("\Windows\Swype\Qwertz_LS"):-File("Qwertz_LS_Standard_CapsLock_wBlue_WVGA.png","\Windows\Qwertz_LS_Standard_CapsLock_wBlue_WVGA.png")
Directory("\Windows\Swype\Qwertz_LS"):-File("Qwertz_LS_Standard_Shifted_wBlue_WVGA.png","\Windows\Qwertz_LS_Standard_Shifted_wBlue_WVGA.png")
Directory("\Windows\Swype\Qwertz_LS"):-File("Qwertz_LS_Standard_wBlue_WVGA.png","\Windows\Qwertz_LS_Standard_wBlue_WVGA.png")
Directory("\Windows\Swype\Qwertz_PT"):-File("Qwertz_PT_Blue_Shifted_VGA.png","\Windows\Qwertz_PT_Blue_Shifted_VGA.png")
Directory("\Windows\Swype\Qwertz_PT"):-File("Qwertz_PT_Blue_VGA.png","\Windows\Qwertz_PT_Blue_VGA.png")
Directory("\Windows\Swype\Qwertz_PT"):-File("Qwertz_PT_Standard_CapsLock_wBlue_VGA.png","\Windows\Qwertz_PT_Standard_CapsLock_wBlue_VGA.png")
Directory("\Windows\Swype\Qwertz_PT"):-File("Qwertz_PT_Standard_Shifted_wBlue_VGA.png","\Windows\Qwertz_PT_Standard_Shifted_wBlue_VGA.png")
Directory("\Windows\Swype\Qwertz_PT"):-File("Qwertz_PT_Standard_wBlue_VGA.png","\Windows\Qwertz_PT_Standard_wBlue_VGA.png")
Directory("\Windows\Swype\SwypeRef_LS"):-File("SwypeRef_LS_Blue_Shifted_WVGA.png","\Windows\SwypeRef_LS_Blue_Shifted_WVGA.png")
Directory("\Windows\Swype\SwypeRef_LS"):-File("SwypeRef_LS_Blue_WVGA.png","\Windows\SwypeRef_LS_Blue_WVGA.png")
Directory("\Windows\Swype\SwypeRef_LS"):-File("SwypeRef_LS_Standard_CapsLock_wBlue_WVGA.png","\Windows\SwypeRef_LS_Standard_CapsLock_wBlue_WVGA.png")
Directory("\Windows\Swype\SwypeRef_LS"):-File("SwypeRef_LS_Standard_Shifted_wBlue_WVGA.png","\Windows\SwypeRef_LS_Standard_Shifted_wBlue_WVGA.png")
Directory("\Windows\Swype\SwypeRef_LS"):-File("SwypeRef_LS_Standard_wBlue_WVGA.png","\Windows\SwypeRef_LS_Standard_wBlue_WVGA.png")
Directory("\Windows\Swype\SwypeRef_LS_Editing"):-File("SwypeRef_LS_Editing_WVGA.png","\Windows\SwypeRef_LS_Editing_WVGA.png")
Directory("\Windows\Swype\SwypeRef_LS_Numeric"):-File("SwypeRef_LS_Numeric_WVGA.png","\Windows\SwypeRef_LS_Numeric_WVGA.png")
Directory("\Windows\Swype\SwypeRef_PT"):-File("SwypeRef_PT_Blue_Shifted_VGA.png","\Windows\SwypeRef_PT_Blue_Shifted_VGA.png")
Directory("\Windows\Swype\SwypeRef_PT"):-File("SwypeRef_PT_Blue_VGA.png","\Windows\SwypeRef_PT_Blue_VGA.png")
Directory("\Windows\Swype\SwypeRef_PT"):-File("SwypeRef_PT_Standard_CapsLock_wBlue_VGA.png","\Windows\SwypeRef_PT_Standard_CapsLock_wBlue_VGA.png")
Directory("\Windows\Swype\SwypeRef_PT"):-File("SwypeRef_PT_Standard_Shifted_wBlue_VGA.png","\Windows\SwypeRef_PT_Standard_Shifted_wBlue_VGA.png")
Directory("\Windows\Swype\SwypeRef_PT"):-File("SwypeRef_PT_Standard_wBlue_VGA.png","\Windows\SwypeRef_PT_Standard_wBlue_VGA.png")
Directory("\Windows\Swype\SwypeRef_PT_Editing"):-File("SwypeRef_PT_Editing_VGA.png","\Windows\SwypeRef_PT_Editing_VGA.png")
Directory("\Windows\Swype\SwypeRef_PT_Numeric"):-File("SwypeRef_PT_Numeric_VGA.png","\Windows\SwypeRef_PT_Numeric_VGA.png")
miniterror said:
and here it is
i dont know f it works right for you as vga as some thing say wvga
you can always try and otherwise i have looked in the app.dat file that is in the 0409 folder
it looks the same so you could also use that entire entry i think
one other thing
i loked at the packages and for example there isnt a youtube package in
you think i can use the youtube package i have in my wvga kitchen?
best regards
chris
Click to expand...
Click to collapse
many thanks, will give it a go wvga will build but it won't size right
run a search, you should find what you need
chrisd1a1 said:
many thanks, will give it a go wvga will build but it won't size right
run a search, you should find what you need
Click to expand...
Click to collapse
thx for the rep
i think i will have to start building the rom to see what i actually miss
if i miss a thing and cand find it can ask if you have it?
miniterror said:
thx for the rep
i think i will have to start building the rom to see what i actually miss
if i miss a thing and cand find it can ask if you have it?
Click to expand...
Click to collapse
feel free, my diamond just died on me so i may be stuck for a while...
chrisd1a1 said:
feel free, my diamond just died on me so i may be stuck for a while...
Click to expand...
Click to collapse
sorry to hear that mate
can you still enter bootloader or is bootloader also dead?
miniterror said:
sorry to hear that mate
can you still enter bootloader or is bootloader also dead?
Click to expand...
Click to collapse
it's dead, dead.. no lights, no power. nothing.
good thing i've still got 20 days of the warranty.
chrisd1a1 said:
it's dead, dead.. no lights, no power. nothing.
good thing i've still got 20 days of the warranty.
Click to expand...
Click to collapse
you think it will work:-o
if you send it for repair and the manage to get it working again they will see the changed spl and rom
but i sure hope they can manage to fix it for you whitout complaining about it
miniterror said:
you think it will work:-o
if you send it for repair and the manage to get it working again they will see the changed spl and rom
but i sure hope they can manage to fix it for you whitout complaining about it
Click to expand...
Click to collapse
lol, it's an O2 XDA, i work for em and know the process. it it doesn't boot they are likely to swap it for a reconditioned one. (at least they have in the past) it costs less than trying to fix it.
here is hoping cos i wanted to get my build working fully before my upgrade