Related
Hello everyone, I am really new to this forum having received the Dash 2 days ago. Looking to get it up to speed I flashed the 6.5 Energy Rom according to instructions. I think that was a very bad move, because now the cellphone is stuck on the Loading Energy Rom screen. I have searched the forum for answer and have already tried the following:
1- Entering bootloader and flashing original ROM. No luck because EVERY rom I have gotten, be it from here and T-Mobile, it says invalid vendor ID.
2-Tried to perform a hard reset. Did not work.
3-Flash the original ROM through the memory card. No avail.
The phone cannot connect to active sync, so I can't install any cooked ROMS. I think the solution is installing the original ROM by the bootloader, but I cant seem to find a compatible one. My cell information is the following:
Bootloader screen info: ONBL 1.22.0000 SPL 1.22.0000 IU
EXCA 100 S/N SZ713FE05873.
Is there any way with that information someone can tell me which ROM to use? Or any other tip/hint/suggestion? Any help will be greatly appreciated!
I have the same Bootloader screen info: ONBL 1.22.0000 SPL 1.22.0000 IU value and i was able to restore my phone to working status with the following ROM
http://www.megaupload.com/?d=IJIVTIMF
Hope this help
10507
Thank you very much 10507! I'll download it now and see if it works.
Thanks for the file but it appears that it is for the SDA. It dit not work
luisro said:
Thanks for the file but it appears that it is for the SDA. It dit not work
Click to expand...
Click to collapse
That's odd, I was able to restore my Excalibur/Dash after flashing the corrupted EnergyRom.
Hope you will find a way to resolve your problem.
10507
But how did you do it? Flashing it through USB or through the memory card? The weird thing is that when I run the EXE the cellphone that appears in the picture of the program is an SDA. But well I will try it again and thank you for the help!
I used bootloader method and connected my phone through USB for flashing. Remember to remove your memory card when flashing.
well, I've been in your situation for almost 3 days now, and still no solution for it, maybe it's time to put it in the box and purchase a new one , all thanks to the broken EnergyROM ...
Ok guys. Don't give up. Believe it or not, a Dash is NOT easy to brick like some other devices. the steps are fairly clear but let me refresh:
- Go into bootloader by holding the camera button and powering on the phone
- Connect the USB cable, you will hear the ba-bing USB connect sound on your PC (if u don't thats why you're having issues flashing)
- Download and unpack a "factory sealed" signed ROM. I use this one: http://rapidshare.com/files/7886560...S_1.33.422.1_4.1.13.51_03.07.90_Ship.exe.html
- With USB connected and the phone in the multicolor bootloader, run RomUpdateUtility.exe, check the boxes, it next, bla bla bla.
- It will look for your device for 20 seconds. then hit "update" and next.
- It should then start flashing the Excalibur Brightpoint Factory ROM back onto your phone
- If you can't get this far or it fails, try a different PC or Flash from the SDcard
** NOTE: If flashing from USB, REMOVE the SD CARD! This is the biggest mistake of most people trying to flash from USB.
Good luck.
ookba said:
Ok guys. Don't give up. Believe it or not, a Dash is NOT easy to brick like some other devices. the steps are fairly clear but let me refresh:
- Go into bootloader by holding the camera button and powering on the phone
- Connect the USB cable, you will hear the ba-bing USB connect sound on your PC (if u don't thats why you're having issues flashing)
- Download and unpack a "factory sealed" signed ROM. I use this one: http://rapidshare.com/files/7886560...S_1.33.422.1_4.1.13.51_03.07.90_Ship.exe.html
- With USB connected and the phone in the multicolor bootloader, run RomUpdateUtility.exe, check the boxes, it next, bla bla bla.
- It will look for your device for 20 seconds. then hit "update" and next.
- It should then start flashing the Excalibur Brightpoint Factory ROM back onto your phone
- If you can't get this far or it fails, try a different PC or Flash from the SDcard
** NOTE: If flashing from USB, REMOVE the SD CARD! This is the biggest mistake of most people trying to flash from USB.
Good luck.
Click to expand...
Click to collapse
Thanks ookba for cheering us up. I'm having the same problem like many, many people in this forum hopeless seeing our dash not responding to every solution proposed in this forum and the only thing that we have right now is keep trying to flash and see if it works. I will try again in different PC and see what happens. I'll let all of you know if I finally resurrect my s621.
Thanks everyone for all the help! It's hard to find people that are so helpful on internet forums. I'm still in the same situation as gmaniac and alexalexoe but hopefully we can find something that will fix our problems
luisro said:
Thanks everyone for all the help! It's hard to find people that are so helpful on internet forums. I'm still in the same situation as gmaniac and alexalexoe but hopefully we can find something that will fix our problems
Click to expand...
Click to collapse
This problem is ridiculously weird to why some members are able to restore their phone to original factory condition, and others are not able. Therefore, I have search from trustworthy sites and from friends for difference made ROM. Hopefully, one of these ROMs with help out anyone...........
1.33.422.1 (Worldwide English, WM6)
http://rapidshare.com/files/7886560...S_1.33.422.1_4.1.13.51_03.07.90_Ship.exe.html
1.27.405.1 (Worldwide English, WM6)
http://rapidshare.com/files/100235639/HTC_S620_WWE_1.27.405.1.exe
1.22.531.6 (T-Mobile USA, WM6)
http://www.mediafire.com/download.php?z4vjgzxisrz
1.22.531.4 (T-Mobile USA, WM6)
http://www.mediafire.com/download.php?yygkw1d5xmc
1.11.531.1 (T-Mobile USA, WM5)
http://rapidshare.com/files/104641948/T-Mobile_DASH_WM5_V_1.11.531.1.exe.html
Excalibur_BRIGHTSTAR_PTB_1.30.514.2_4.1.13.47_ 02.98.90_Ship
http://www.mediafire.com/?9gbwdzd2omg
Thanks 105507 but no success at all, I even found 2 more factory roms in the web and also they don't work. I own an unbranded international version s621 manufactured by Brightstar corporation (I tried to flash Brightstar's stock rom but it didn't work) and I noticed this because in the warranty docs it says brigthstar corporation and originally the phone came with WM5.
not that this will help. but this is one of the reasons why people should be really installing the hardspl so if you have a bad flash, you dont have to install a stock rom. any rom whether be it cooked or not will work. but this hardspl must be done prior to installing ANY rom. the hard spl is done by jockyw2001. send him a pm to see if theres anyway to get that on the phone, even in its current state.
edit: here's the link to the hardspl: http://forum.xda-developers.com/showthread.php?t=329605
luisro said:
Hello everyone, I am really new to this forum having received the Dash 2 days ago. Looking to get it up to speed I flashed the 6.5 Energy Rom according to instructions. I think that was a very bad move, because now the cellphone is stuck on the Loading Energy Rom screen. I have searched the forum for answer and have already tried the following:
1- Entering bootloader and flashing original ROM. No luck because EVERY rom I have gotten, be it from here and T-Mobile, it says invalid vendor ID.
2-Tried to perform a hard reset. Did not work.
3-Flash the original ROM through the memory card. No avail.
The phone cannot connect to active sync, so I can't install any cooked ROMS. I think the solution is installing the original ROM by the bootloader, but I cant seem to find a compatible one. My cell information is the following:
Bootloader screen info: ONBL 1.22.0000 SPL 1.22.0000 IU
EXCA 100 S/N SZ713FE05873.
Is there any way with that information someone can tell me which ROM to use? Or any other tip/hint/suggestion? Any help will be greatly appreciated!
Click to expand...
Click to collapse
My phone is the same your phone but ONBL 1.33.0000 and SPL 1.33.0000
I'm trying to find the original rom of this line but not found. Please help me!
Have you done a reset? My friend fixed his by trying reset a few times. He reset it, walked away...., it took long time to see whether it booted over; if not, do it again...
By the way, he leave the sim card in; and, you need to remove your micro sd card.
On an official site it is possible download ROM for your phone. It is flashing from bootloder mode. It some times helped me, while I have not flashed hard SPL.
luisro said:
Thanks everyone for all the help! It's hard to find people that are so helpful on internet forums. I'm still in the same situation as gmaniac and alexalexoe but hopefully we can find something that will fix our problems
Click to expand...
Click to collapse
Hi my friend, I wish you lucky!!!
by the way, where country you're from, I have some Shipped Roms here for brazilian Excalibur (S621), maybe it could help, if the answer is yes, let me know to made this one come to you
http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard
Furious Girlfriend (oh My beloved Helloween died with my ROM's)
Boy oh Boy...
My ROM's are now in heaven
Girlfriend deleted they (I'm so sorry...)
But, pay attention in this thread
http://forum.xda-developers.com/showthread.php?t=381726
In there have a sort of shipped ROM's and maybe coud help you
Good luck my friends
A friend from XDA have some Shipped Rom's and will upload it for you, shortly he'll post something here
Hey there,
After lots of problems with my P3300 (see this thread), I've decided to flash it to see if that helps. I'm not too bothered about getting the GSM working again as I have another phone, but I'd like to be able to run all apps again.
So... I'd like some advice please.
What would be the best ROM for me to use if I just want to use the phone as a GPS device, portable wifi web browser and notepad?
Basically something pretty stripped down with as good battery life as possible.
Is there any advantage with going for WM6 over WM5?
Bear in mind I've never done this before and am currently reading up on all of it.
From what I've read so far I'll have to do the CID unlock first (currently have WM5 in french installed and would like an english ROM)? I think it may be unlocked already but am not sure. Is there a way to check? Do I risk anything if I run USPL even though the phone is already unlocked?
Thanks in advance for any advice!
You can check if your phone is CID unlocked if the SPL number which comes up while booting during the big white HTC screen says 1.11.0000. If it says anything other than that then it's not unlocked.
Best stripped rom for me is Sheen's clean base version 3. Check it out, it's on the first page of the thread.
alternatively, if u want fast and stripped, go for yues extraclean (see my signature)
greetz
ferfecir Clean
This is the best clean rom which is a modified version of Yues clean with 30mb free ram.
http://forum.xda-developers.com/showthread.php?t=531972&highlight=ferfecir
mta33 said:
This is the best clean rom which is a modified version of Yues clean with 30mb free ram.
http://forum.xda-developers.com/showthread.php?t=531972&highlight=ferfecir
Click to expand...
Click to collapse
Pagepool 4 MB
RAM 32 MB
ROM 69 MB
Thanks for the replies. My SPL says 1.12.0000 so I guess I need to do the CID unlock.
Ferfecir Build 20931 looks like the most promising from those.
Can anyone please point me to a good tutorial for flashing the ROM via activesync? I'd rather not have to format the memory card if I can avoid it and my soft reset button is broken. (I have serached but had no luck)
Thanks!
download uspl from here http://forum.xda-developers.com/showthread.php?t=311403
and any rom you want...
unpack the uspl
plug the cable in the device and establish a usb connection
run the "start_uspl.exe" be patient...after being prompted to click some "next buttons" follow the procedure...and i mean it...follow the procedure...that with 50% battery,no programs running on the pc,no unplugging the cable and so on...
and you will have the uspl flashed
go to boot loader...The bootloader is invoked by pressing down the Power and Voicedialer buttons simultaneously, and using the stylus at the same time to press the RESET button at the left side. Continue pressing the two buttons for a few seconds after pressing and releasing the reset button until the bootloader screen appears.
if uspl says 1.11.000 then you are good to go
now you can flash any rom (cooked for artemis) and any artemis radio (i recommend you the 3.34.90.) onto your artemis
simply download,extract,run the rom update utility (RUU) ,follow the procedure and watch the show...
if you ever get an error during flash or anywhere else in the rom update utility...refer to this page and troubleshoot your troubles http://wiki.xda-developers.com/index.php?pagename=RUU_Errors
if you get an error saying invalid file size or something like that (you will get it if you try eg this rom..http://forum.xda-developers.com/showthread.php?t=465291)
go to this thread http://forum.xda-developers.com/showthread.php?t=521406 download the file and flash it if it is an ordinary rom...just run the RUU
afterwards just check it in the bootloader if it says 1.11.cmon it is ok....and you will be able to flash virtually any rom cooked for artemis onto yours
i must be damn crazy to post this thing...because it is all there in the wiki and the forum stickies,believe it or not
Thank you very much for the detailed instructions.
Just two more questions!
My reset button is broken. Can I just turn the phone off and back on to check if I have 1.11.0000 instead of using the bootloader?
And the RUU is this one? http://code.google.com/p/htc-flasher/downloads/list (only file I have for the new Ferfecir ROM is a .nbh, is that all I need?)
Thanks again.
this is a very open-ended question.
Everyone on here will have their own favourite rom....if there was 1 definate fits-all "best" rom ...everyone would be using it..but there isnt and we are all using the rom that suits us best
some people want their phone to be more like an iPod and so the multimedia aspect is a priority along with decent graphics and animated menus
some people want the PDA functionality most so they want a really stripped-down fast rom that is reliable and handles email well
everyone wants to use it their own way....thats why this site exists.
The guys who make these ROMS are the guys who say "this is good, but i want it to be more like THIS."
Follow farukb's (excellent) instructions....unlock your device properly....if you get any problems, search for the answer before asking for help....chances are hundreds of people will have had the same problem and hundreds of people will have already given the answer...and then ....just look around the site. See which roms are available that fit YOUR needs, and flash it....if you dont like it, try another.
I'm trying 6.5 roms at the moment and love it....i've flashed it probably once a week with a new ROM each time a new version is released and have seen the OS evolve....right now i'd say PDhee's Mega 6.5 M2D rom is the best of the bunch providing you're not planning on installing LOTS of exra programs.
that's the beauty of these things, if you dont like the ROM, just try another. Sometimes the ROM won't work quite right (especially if flashing ROMs between different cooks) so just try flashing it again to make sure it resets everythin correctly. If it's still not right, try a different ROM.
farukb said:
i must be damn crazy to post this thing...because it is all there in the wiki and the forum stickies,believe it or not
Click to expand...
Click to collapse
yeah, unfortunately (and it seems to have increased over the last year or so) nost people on here are noobs who can't be bothered to read through some threads or use the search and we just get the same questions asked constantly.
I dont minds helping people....providing they've looked for the answer themselves first.
every time a new rom is released there will be people asking what error 260 or 270 means?, do they need to USPL? etc etc
it's easier to ask someone else to take time out of their day to aswer your question than just type "error 260" into the search box and find out for yourself. They dont consider that people are having to answer these questions 10 times a week, in their own time, for no thanks, just to have the same question asked the next day. Purely becuase they couldn't be bothered to see if anyone else has asked that question before.
sorry...rant over....i love you all
seebasso said:
Thank you very much for the detailed instructions.
Just two more questions!
My reset button is broken. Can I just turn the phone off and back on to check if I have 1.11.0000 instead of using the bootloader?
And the RUU is this one? http://code.google.com/p/htc-flasher/downloads/list (only file I have for the new Ferfecir ROM is a .nbh, is that all I need?)
Thanks again.
Click to expand...
Click to collapse
no
you need to use the reset button (stick the stylus in the reset hole) .
Reset is like turning your computer off and on again
Power button is like turning the monitor off....it doesnt stop programs running and it doesnt properly reboot the device.
Your only alternative is taking the batter out i think (just like pulling the plug out will also reboot your computer).
If you havent already run USPL, then you probably WILL need to do it.
i dont know the specific ROM you're talking about, but just an NBH file will NOT work. You need the EXE file to run it.
Just download any suitable ROM off this site and it will have the whole package....if you're downloading from another site you'll have to ak that other site for help
my reset button doesn't work. i took the phone apart to change the touchscreen and must have misaligned something when putting it back together. sticking the stylus in the hole doesn't do anything anymore. will take the battery out instead, thanks.
regarding the rom, it is one i downloaded from here: http://forum.xda-developers.com/showthread.php?t=531972&highlight=ferfecir
the rar file downloaded from 4share (http://www.4shared.com/file/112067347/72728603/ARTEIMG-Ferfecir_-_20931_en_gncel_hali.html) only contains the nbh, no exe.
and for the record, i've spent all afternoon/evening researching this, searching this forum and the wiki etc! i appreciate it's annoying answering the same noob questions over and over again but i thought my thread was specific enough to warrant it and am grateful for all the replies.
seebasso said:
regarding the rom, it is one i downloaded from here: http://forum.xda-developers.com/showthread.php?t=531972&highlight=ferfecir
the rar file downloaded from 4share (http://www.4shared.com/file/112067347/72728603/ARTEIMG-Ferfecir_-_20931_en_gncel_hali.html) only contains the nbh, no exe.
and for the record, i've spent all afternoon/evening researching this, searching this forum .....
Click to expand...
Click to collapse
...yeah, and if you read ferfercirs description fully, you will come past "sd-card-flashing" which is the way to flash the *.nbh -part of your rom in a way without needing an activesync connecton
greetz
i did read that bit
but as mentioned a couple of times in this thread already, my reset button is not operational so i cannot use bootloader (afaik). so i assumed there was another way.
but i guess i'll find a rom that comes an an exe and save myself some trouble
no need to keep searching,
u can simple take the provided *.nbh file that came without an exe, rename it to ruu_signed.nbh, exchange the existing RUU from a complete installer-routine and off u go, provided u have used uspl first
greetz
ok thank you once again, i'll try it tonight.
one final question! do i need to have a sim card inserted while running USPL or does it not matter?
It is recommended to remove both your SIM card and your MicroSD card during any type of flashing, whether it be USPL or ROM. Even my reset button is not working anymore, my phone got dropped in water and I had to give it for repairs. After motherboard change they assembled it slightly wrong I guess, and it doesn't work. But I can still get into bootloader by just pressing the Voice record and power buttons together for 10 seconds. Try that.
Secondly, I hate to be plugging myself here, but I have just cooked a clean 6.1 ROM myself, with the latest build of 6.1 that is 21054. you might want to check that out, it comes with the full package and not just the nbh
here it is - (http://forum.xda-developers.com/showthread.php?t=551728)
Again, sorry, but Im giving you an option thats all
thormdac said:
no need to keep searching,
u can simple take the provided *.nbh file that came without an exe, rename it to ruu_signed.nbh, exchange the existing RUU from a complete installer-routine and off u go, provided u have used uspl first
greetz
Click to expand...
Click to collapse
ok i need help again sorry! i tried this but i got an error after 5% saying the .nbh was an invalid size
i used the ROMUpdateUtility.exe from Arte_WM65_23009_M2D_Mega_beta1 ROM (i removed Arte_WM65_23009_Mega_b1.nbh from the folder and replaced it with Ferfecir's .nbh which I had renamed to ruu_signed.nbh)
What did I do wrong?
I ended up flashing with Arte_WM65_23009_Mega_b1.nbh and it worked great but that ROM is too much for me and I want Ferfecir's simpler one.
Thanks
You need to flash the newer USPL which allows nbh files of a smaller size to be flashed.
thanks! it worked. everything working perfectly and my gsm works again too. woohoo.
Please save sarcasm when responding. I have been reading and would onlt ask for help a last option.
My phone - HTC Pro 2 (I bought it from a authorized t-mobile store)
Need help with - ugrading it to 6.5 or any cooked version that will work
History - my phone is already unlocked as I had unlock kings do it. I tested it and I can put any sim it and it works fine.
Problem - every time I try and install a new rom on it I get one the follwing errors or issues: My usb connection stop when the install starts and the process times out, or I get a host of errors messeges from invild device to wrong version.
I need very simple instructions on what I need to do upgrade my os and then later migrate to some of the really roms I have seen on this site.
Please help.
Did you hardSPL? If not go here: HardSPL
Nothing
I DL'ed the fle and followed directions (auto option). Nothing happened.
bigdaddy67 said:
I DL'ed the fle and followed directions (auto option). Nothing happened.
Click to expand...
Click to collapse
When you read those 11 steps in the HSPL thread, where is it, where you say: nothing happends?
As it stands, you will only be able to install an official T-Mobile ROM if it is a T-Mobile-branded phone.
So installing HardSPL will let you flash whatever ROM you want, any of the official ones (including, say, HTC official 6.5), or one of the fine cooked ones from this forum.
If you are having trouble with HardSPL, you really need to post on that in the HardSPL sticky.
no matter what I do, the connection always times out. It seems my phone will not allow anything rom software to be installed. Where can I find enableapnew.cab? The rom software told me i needed that.
@bigdaddy67
This sounds like a USB issue, try this:
1. Power off your TP2
2. Press and HOLD the volume down button, press and HOLD power button until you see the multi-coloured screen (bootloader mode)
3. Connect your TP2 to your computer via USB
4. You should now see the letters USB at the bottom of the TP2 screen
5. If you DO, run hardSPL
If you DON'T, try a different USB cable and/or port on your computer.
If none of the above helps, take a screen shot of your bootloader screen and post it.
How to get a screenshot:
1. Go to http://www.mymobiler.com and download/install the software.
2. Open it and take a screen shot
3. Post it here.
We are here to help, but need some additional details!!!
Russ
bigdaddy67 said:
no matter what I do, the connection always times out. It seems my phone will not allow anything rom software to be installed. Where can I find enableapnew.cab? The rom software told me i needed that.
Click to expand...
Click to collapse
normally I would tell you to go search but you seem to be in a pickle so here...
Russ
bigdaddy67 said:
Please save sarcasm when responding. I have been reading and would onlt ask for help a last option.
My phone - HTC Pro 2 (I bought it from a authorized t-mobile store)
Need help with - ugrading it to 6.5 or any cooked version that will work
History - my phone is already unlocked as I had unlock kings do it. I tested it and I can put any sim it and it works fine.
Problem - every time I try and install a new rom on it I get one the follwing errors or issues: My usb connection stop when the install starts and the process times out, or I get a host of errors messeges from invild device to wrong version.
I need very simple instructions on what I need to do upgrade my os and then later migrate to some of the really roms I have seen on this site.
Please help.
Click to expand...
Click to collapse
Welcome to forums
Hope this guide help you:
http://forum.xda-developers.com/showthread.php?t=550540
And don´t forget to vote!
bigdaddy67 said:
no matter what I do, the connection always times out. It seems my phone will not allow anything rom software to be installed. Where can I find enableapnew.cab? The rom software told me i needed that.
Click to expand...
Click to collapse
Also, which OS are you running on your PC? If its Windows XP, make sure you download Active Sync and install/run it. If you run Vista / 7, make sure you run the Mobile Device Center.
moved you're thread out of rom dev section, best of luck sir.
Update -
My OS is win xp and copied and installed the cab on my device. then I re-powered hold down the volume and got that tri-color screen with the usb connected. Started the HardSP app and have been waiting for 15 minutes as nothing seems to be working.
Did I miss something?
Got error 262
Ok I finally got an 262 error. I am not what I missed. Dl'ed the cab re-powered holding down vol key started HardSp app.
Help.
Stil need help
I am at home and my pc is vista. Can someone pls help get over this hurdle?
Please Please Please
Hi,
experiencing a problem with my Xda O2 branded German Touch Diamond:
after switching on the WiFi the device rebooted itself and continued to reboot permanently until I remove the battery. Battery is full actually.
I flashed the original ROM successfully (previous one was a BliZZard custom ROM v5), but the device is still continues to reboot.
For warranty reasons I need to flash the original stock SPL back, but no success with this. I flashed it couple ot times and the flashing CustomRUU.exe showed success each time. But after prooving the SLP it still shows 1.93.Olinex.
I tried also any other HardSPLs like Olinex 1.37... again the same problem. 1.93.Olinex is showed on boot.
Any idea how to solve the flashing problem or maybe also any hint about the reboot problem?
I have important stuff on the 4 GB internal flash. How can I read the contets considering the above problem?
Any help highly apprechiated!
Cheers
same problemm
Same problem. Any help?
tekata said:
Hi,
experiencing a problem with my Xda O2 branded German Touch Diamond:
after switching on the WiFi the device rebooted itself and continued to reboot permanently until I remove the battery. Battery is full actually.
I flashed the original ROM successfully (previous one was a BliZZard custom ROM v5), but the device is still continues to reboot.
For warranty reasons I need to flash the original stock SPL back, but no success with this. I flashed it couple ot times and the flashing CustomRUU.exe showed success each time. But after prooving the SLP it still shows 1.93.Olinex.
I tried also any other HardSPLs like Olinex 1.37... again the same problem. 1.93.Olinex is showed on boot.
Any idea how to solve the flashing problem or maybe also any hint about the reboot problem?
I have important stuff on the 4 GB internal flash. How can I read the contets considering the above problem?
Any help highly apprechiated!
Cheers
Click to expand...
Click to collapse
Any chance to MTTY? Might help, just guessing...
Or try to flash a new radio ROM as the wifi hardware might be stuck in a state that is unknown to the drivers. Flashing a radio is supposed to reset hardware but I may be wrong.
Really guessing here but symptoms shows relation to radio hardware.
Cheers,
Cina.
sspl
You need to run sspl first before flashing to the stock SPL. I did had this same problem changing my HSPL before.
You can find the sspl on the olipro CID/Security/Sim Unlocker, I think.
Hello, my solution to this was conductive interconnect of metalic parts as you can see here
://i.ytimg.com/vi/UUnH8O-1jII/0.jpg
(of course with http on the beginning, i'm not allowed to post links)
on the left with aluminium tape (sorry for image quality, found it on web).
It also seems that the sim card reader has to be conductively connected with the above em shielding.
Hope it will help
it´s a battery problem ... get a different one and your phone should be fine
Dreamtheater2003 said:
You need to run sspl first before flashing to the stock SPL. I did had this same problem changing my HSPL before.
You can find the sspl on the olipro CID/Security/Sim Unlocker, I think.
Click to expand...
Click to collapse
Please correct me if I am wrong. But as far as I understood, it is only possible to SSPL the phone after running the system on it (e.g. inside windows mobile) and not from outside (e.g. USB connection or so). The problem is, that I cannot access win mobile at all! It is continuosly rebooting in an infinite loop. Not even able to see the windows mobile logo at start.
@cina
how do I MTTY the phone? any idea, link, tool? again: if I have to be "in the system" in order to check, whats wrong, then it will fail.
@edefux
Do you already had such a case? I am not sure, if buying a new battery is economical enough only in order to try, if it works. I admit, it could be the battery. But running the phone with the charger switched on, should show if its the battery or not. I tried with charger on, but obviously this didn't solve the problem. Or do you mean, that in the battery there is some sort of "short circuit", that's confusing the Diamond no matter if the charger is on or not?
@DiamondFlower
Thanks for the suggestion. I'll give it a try, when I tried everything else
This will be the final try before burrying the precious Diamond.
Cheerz
MTTY.
tekata said:
Please correct me if I am wrong. But as far as I understood, it is only possible to SSPL the phone after running the system on it (e.g. inside windows mobile) and not from outside (e.g. USB connection or so). The problem is, that I cannot access win mobile at all! It is continuosly rebooting in an infinite loop. Not even able to see the windows mobile logo at start.
@cina
how do I MTTY the phone? any idea, link, tool? again: if I have to be "in the system" in order to check, whats wrong, then it will fail.
...
Cheerz
Click to expand...
Click to collapse
See this post for MTTY. This is the second post on Diamond ROM thread pinned for easy access anyway. Please search before you post!
If you can enter bootloader mode with VolDown pressed while reboot you're off to go. You can plug in USB cable and you can flash SPL, Radio or any new ROM. I assumed this based on your first post:
tekata said:
I flashed the original ROM successfully (previous one was a BliZZard custom ROM v5), but the device is still continues to reboot.
Click to expand...
Click to collapse
Cheers,
Cina.
it is a battery problem i´m 99,9% sure of it - i had the same case ... it was driving me crazy ... different roms, radios, but the problem persisted - luckily at that time i was working at a cell phone provider and could try different hardware, which finally brought me to the solution to switch the battery.
edefux said:
it is a battery problem i´m 99,9% sure of it...
Click to expand...
Click to collapse
Maybe I'm a bit unlucky, but I've got the 0,1%. Took a new battery, this didn't solve the problem though.
i´m sorry it didn´t work for you ... !
it's ok! it didn't work - actually I could have thought about it wont work: beforehand I sent the item to the mobile operator guarantee team and they returned it back - no warranty of course (due to olinex bootloader which I wasn't able to remove) and stating: Fremdeinwirkung/ Totalschaden (total loss). And because I sent it without battery and they obviously checked it ... suppose with a fresh or "good" battery. And it still didn't work for them, so...
I'll try to open it and see if there is some short circuit around the metal shielding. Maybe I'm lucky then.
Anyway thanks guys about the hints and suggestions!
tekata said:
Please correct me if I am wrong. But as far as I understood, it is only possible to SSPL the phone after running the system on it (e.g. inside windows mobile) and not from outside (e.g. USB connection or so). The problem is, that I cannot access win mobile at all! It is continuosly rebooting in an infinite loop. Not even able to see the windows mobile logo at start.
Click to expand...
Click to collapse
I'm not sure if its called sspl but you can run it from boot loader and it will black out your phone. after that you need flash the new bootloader.
I'm thinking its not a bootloader problem though...
hello everyone..
this morning I was intended to revert my kaiser back to WM 6.1,
I followed the instruction to put the ROM to my SD card along with KAISDIAG.nbh.
but maybe I chose a wrong rom, as the process goes, I just realize that the process was deleting my hard SPL..
now the text my 3 color display only says "SPL-1.56.0000"
but the android is still working....
so now my phone run on android without hard SPL...
could anyone help me? is it possible to install a hard SPL from android?
flashing from SD card doesn't works because I don't have any hard SPL installed..
There is no way at present to install hardspl from android, since we cannot run jumpspl, however you should still be able to flash a stock 6.1 rom using usb method.
Sent from my HTC Dream using Tapatalk
I have tried, but the process always failed with connection notification.It says that update utility cannot connect with my pda phone.
Well the problem is, flashing with usb method needs activesync connection with the computer. since microsoft activesync doesn't applicable anymore, I have no idea how to build connection with my phone. Besides, nothing seems happened every time I connect my phone with usb cable. Its just like my pc couldn't detect the device.
Should I install some kind of programs first on my pc? or am I miss some steps to make my phone detected by my computer?
I'm using windows xp by the way..
The CustomRUU still works for me if you boot the phone into SPL first (reset and camera+power buttons) then plug it into the computer and run the RUU (no activesync connection), so you should be able to flash a WM ROM, then you can sort out the HardSPL later
EDIT: Or does that only work for me because I have already got HardSPL?
yes it works..
the process goes, but only for 1 % . my phone reset itself and the notification on my pc says about invalid vender ID "this update utility cannot be used for your PDA phone, please check your update utility."
since the only stock rom that I found is .exe which is extract itself, I couldn't use The CustomRUU. Could this be the problem? or do I choose a wrong rom?
edit : I'm trying to install Factory Shipped ROM form HTC
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
Do you know where to find stock rom for kaiser? most of the post about stock rom leads me to wiki xda, which is not available anymore.
thanks.
Not sure if these will work, but there are links to original HTC and ATT ROMs here
Also at the bottom of that post is a link to some reconstructed original ROMs
I have no idea if these will work any better than the one you've already tried, but it's probably worth having a go
thanks for the link..
I have visited that thread before, actually the 1st ROM that I tried to flash is also from that page. Both original ROMs for HTCor ATT doesn't works for my phone. But thanks to you I just realize the link about some reconstructed original ROMs.
Well, My phone is KAIS-100 which is made in Taiwan.
I guess I'll try Chinesse HTC 1.56.708.3.
I hope this one will make a progress.
-----------------------------------------
aww... still not working..
with reconstructed ROM, the process stuck at 0%, give me error [262] notification : update error. The manual said that if this kind of error occurred, I just need to do soft reset and run RUU again. I have tried several times even restart my pc first, but still not working.. any suggestion?
Try to flash radio. If you can't do it i think that you have messed up the bootloader
I can't...
the result is same, I'm trying to flash KAIS_Radinly_1701909 or KAIS_RADIO_ONLY_1710901_Custom, I got stuck in 0% with error [262]
The text in my bootloader says
KAIS-100
SPL-1.56.0000
CPLD-8
So, is there nothing else I could do if I have broke my bootloader?
No one can help me anymore? T-T
(running to the middle of the street and shout "why God, why??")
So, the lesson is :
If you are trying to flash back to windows mobile, DO NOT use factory shipped rom. Because it will modify your hard SPL and downgrade your radio version.
If the process failed and your hard SPL gone, you will get stuck in half working android without being able to flash anything, including correct your radio version, or reflash your kernel to fix your panel setting.
correct me if I'm wrong..
well, I hope my experience could be useful for you.
Thanks.
You can extract the exe file with winrar and you'll have all the files including RUU_signed.nbh
Rename it to kaisimg.nbh and copy to sdcard
Don't know if you can install from sdcard but since it's the shipped rom it might let you.
thank you salac..
I also have tried that method, using winrar to extract exe files.
but still, no luck for me..
Flashing via SD card got me stuck at loading screen, and I also tried to use custom RUU to flash the files via usb but my phone reset itself at 1% of the process and gives me error message [294] : invalid vender ID.
SOLVED
Finally
after days of yearning..
I found a suitable WM 6.1 ROM for my kaiser.
My phone is KAIS 100 HTC P4551. Usually, KAIS 100 model is for AT&T but mine is HTC branded, so that's why AT&T stock ROM won't works and my phone was originally shipped for US, that's why most of WWE stock ROMs always give me error 294.
So, basically I have to use HTC WWE ROM for US and this is really gives me hard time since HTC US website only provide ROM for AT&T.
In case you have same problem with me, I have uploaded the ROM at rapidshare
and you could find it here.
Now, I can flash a hardSPL, fix my radio version....
and flash back to android..