Develop Bugs

Stoopid noob needs advice,please dont flame.

Just been given a Vodafone u.k 1605(hermes),the digitiser was trashed so ive soldered in a new one.I would love to install Black 2.5 for T-moblie u.k which is my sim network.Do i just install this to the phone or do i have to take any other action first?The phone is unlocked.
Sorry,i imagine this has been asked many times before.I have seen mention of Hard spl's and other thing a ma jigs lol.
Many thanks Tony

You really have a lot of reading to do. So much that we cannot post it all here. It has taken an entire forum for all of the information. You need to start here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
Get familiar with what you can do. First thing you are going to want to do is update the boot loader so you don't brick your device. Read here for more information:
http://wiki.xda-developers.com/index.php?pagename=Hermes_HardSPL

maxoutput said:
Just been given a Vodafone u.k 1605(hermes),the digitiser was trashed so ive soldered in a new one.I would love to install Black 2.5 for T-moblie u.k which is my sim network.Do i just install this to the phone or do i have to take any other action first?The phone is unlocked.
Sorry,i imagine this has been asked many times before.I have seen mention of Hard spl's and other thing a ma jigs lol.
Many thanks Tony
Click to expand...
Click to collapse
Do not "just install" ... ideally read the wiki first, and then follow instructions on Mrvanx's Guide. Upgrading is pretty painless and easy ... and the guide should keep you on track.

A ha ,i knew there would be more to it than that,not sure what a wiki is lol but looks like im gonna find out.
If someone could just give me a list of things to do before hand ill do the appropriate reading
i.e 1 upgrade the boot loader etc etc ,please dont go into detail a mere shopping list will do.
,thanks for the links by the way.
Best wishes tony

maxoutput said:
A ha ,i knew there would be more to it than that,not sure what a wiki is lol but looks like im gonna find out.
If someone could just give me a list of things to do before hand ill do the appropriate reading
i.e 1 upgrade the boot loader etc etc ,please dont go into detail a mere shopping list will do.
,thanks for the links by the way.
Best wishes tony
Click to expand...
Click to collapse
If you follow the advice in link #3 above you wont go wrong.
The site referred to gives you all the knowledge and confidence to do the job.
Trust me I learnt the same way, by reading threads.
good luck!

Sorry peeps,just reading the guide above.I typed before i looked,hopefully all will become clear....ish lol

maxoutput said:
A ha ,i knew there would be more to it than that,not sure what a wiki is lol but looks like im gonna find out.
If someone could just give me a list of things to do before hand ill do the appropriate reading
i.e 1 upgrade the boot loader etc etc ,please dont go into detail a mere shopping list will do.
,thanks for the links by the way.
Best wishes tony
Click to expand...
Click to collapse
Here is the list you wanted:
Read the wiki
Read the installation guides.
Read the threads concerning the threads on available roms.
Understand what you have read.
Flash your phone.

Here you go... step by step list of everything you need to do to upgrade to the Black 3.0:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=45&Itemid=26

Just about to hard spl and reported bat below 50% so have to wait now for it to charge a little lol.Just tried to download black 3.0 and the link seems to be down,i have black 2.5 is that a good one to flash?
Thanks for everyones help thus far by the way.

maxoutput said:
Just about to hard spl and reported bat below 50% so have to wait now for it to charge a little lol.Just tried to download black 3.0 and the link seems to be down,i have black 2.5 is that a good one to flash?
Thanks for everyones help thus far by the way.
Click to expand...
Click to collapse
My subjective pick is Black 3.01 ...
Remember to go "Hard SPL" first, and that you need to upgrade your radio seperately.

Right just updated the Hard splv7 and my radio to 1.41.00.10,ive also flashed with black 3.0. Now i cant seem to get a wireless link to work or turn on my bluetooth?
Also does this mean i can flash any cooked rom?
Many thanks Tony

Update: it just needed a reboot and all was well.
Getting back to the above question-can i flash with any coocked rom now?
Thanks for all your help.Tony

maxoutput said:
Update: it just needed a reboot and all was well.
Getting back to the above question-can i flash with any coocked rom now?
Thanks for all your help.Tony
Click to expand...
Click to collapse
generally speaking, yes.... but be sure you are flashing OS only (unless you want to upgrade your radio too). Most folks are putting out OS only upgrades now, but some replace the radio. once you are hard spl and no longer a flashing virgin, it becomes second nature.

Thanks for everyones help,all sorted,nice one!

Wow what a refreshing read. A noob explaining himself and asking clear questions and members helping him out in an open and non-judgemental way...
Well done everyone!

...and no flames...
Kudos go to MrVanx for those incredible guides.

Yep superb guides and a very noob friendly thread,thanks again peeps.Flashed to a couple of different roms today to check them out.

Cook your own ROM

can someone please advice where i can the tools for this from?
not too sure where to look on here...
if someone can point me in the right direction
thanx in advance

sorry maybe i was a bit vague, i wna trya nd make my own rom and just wna know where i can find software/tools from or even a basic run through
cheers

I think you can find everything you need here
http://forum.xda-developers.com/showthread.php?t=310076

DonAkino said:
I think you can find everything you need here
http://forum.xda-developers.com/showthread.php?t=310076
Click to expand...
Click to collapse
thanks mate appreciate that

im still having a bit of difficulty on cookin my own rom... does anyone have a better step by step guide of cooking a rom... the one that comes with it is maily based on the hermes as oppose to the artemis..
either im dumb and just not understanding it, or theres somethings in that guide that dont actually occur when im doing the extraction part

terabaap said:
im still having a bit of difficulty on cookin my own rom... does anyone have a better step by step guide of cooking a rom... the one that comes with it is maily based on the hermes as oppose to the artemis..
either im dumb and just not understanding it, or theres somethings in that guide that dont actually occur when im doing the extraction part
Click to expand...
Click to collapse
Why ask here, and not in the thread you were directed to? All the experts are there, and not here.
Have you read the thread at all? The extraction part is not the most difficult part.

grun said:
Why ask here, and not in the thread you were directed to? All the experts are there, and not here.
Have you read the thread at all? The extraction part is not the most difficult part.
Click to expand...
Click to collapse
OK thanks, but there was no need to get your nickers in a twist...

how to upgrade?

sry guys am new at this but any of you know an exact link to go to so i can download an upgrade for my tmobile wing

i need help anyone please show me how to update my wing ty

Read here for more info:
http://forum.xda-developers.com/showthread.php?t=369397
Next time just try to search it in the forum.
Cheers

Try to search next time, or follow the link on my sign.....

wat is the best update for the wing and the link for it

and i also need to kno how to do cu i been lookin but cant find anythin please help

I give up...

sry guys am really new at this

You're the one that have to see the ROMs availlable and choose one that you like. For one people one is the best, but for other is other... Because all ROMs have different softwares, tweaks, etc...
Just follow the link that i gave and see wich ROMs are availlable.
In the same link there is a "How 2to flash" that explains you how to do it...
There is all on this link... PLEASE use it!
http://forum.xda-developers.com/showthread.php?t=369397
Cheers

does anybody have the iphone theme for the wing and instructions on how to do it appreciated thanks

The idea is
1. Read the forum ….a lot first get an idea on what’s what and how it works!
2. Go to the relevant sub section for your phone.
3. Read that forum a lot.
4. Search for the how to update my phone guide via the search function.
5. Follow the guide and then if your not certain or stuck THEN post a help request.
I think you will find that there are many different versions of the rom and you will want try the different ones yourself and see what works for you.
As a rule what one person thinks is the best thing since sliced bread the next will think is a pile of manure you ultimately will need to make a decision and once you have followed a guide (and I do mean follow to the letter) and seen how easy it is to do you will feel less worry about the process.
Have fun

Question on flahs rom with Unsigned-Hard-SPL-Diamond-OliNex

Hey guys,
I was using Unsigned-Hard-SPL-Diamond-OliNex to flash b4 installing the new rom. it is showing 100% done and my phone reset, and all look fine...
however when entering bootloader screen it is showing me the version as 1.34.00 (sth like this), and check from the rom in the setting of the phone..it is still 1.34.xx (the original rom).
I was following the steps from some posts in the forums...but still the same..
Can anyone please help? sorry i am a newbie to pda phone...
Thanks again guys

can you follow the steps here exactly and let me know the result?
hard-spl upgrade guide

I have a similar problem. When i made HARD SPL everything is ok, but when i try to make a ROM update there is an error massage on the screen. I tried with 2 or 3 ROMs and always the same ****... I downloaded the official one and it's the same... I made printscreen here it is ---> http://img29.picoodle.com/img/img29/4/7/2/f_gggm_0346e0b.jpg any ideas ?

maybe you installed the rom using sspl and hard spl did not install when you tried to install it. Not sure if this is possible.

Let check the Hard-SPL installed:
press volume down and soft reset (small red button) together and keep until comes out the 3 colored band in the screen, read the Hard-SPL version, it must be 1.40.
Let us know, ciao.

that's the windows error message saying it needs to close.. what's the error message the RUU gives.. it should have a number, or description of what happened. sure your download is not simply corrupt?

Well I have downloaded it 3 times already and every time i tried to make ROM update after HARD SPL my device cannot make upgrade and this error massage is on the screen.. I made soft reset after HARD SPL and there was no 3, but 4 colors on my screen...I thought that I ****ed up the phone, but for my luck I'm not hehe. BUT The f***in version is the same:
ROM version: 1.34.831.1 WWE. ROM date: 05/25/08. Radio version: 0.93.25.NS16. Protocol Version: 52.24.25.08H.
Please help, I don't know WTF!?!? That version is just NO COMMENT!
Thanks...

yeah can you please state the exact error message that comes up?
also, can you confirm you have Hard-SPL on your device.. if so, which version? (signed or unsigned)

racerx_ said:
can you follow the steps here exactly and let me know the result?
hard-spl upgrade guide
Click to expand...
Click to collapse
Yea after i followed the steps it is working all fine for me. I think my original problem is the way to enter boot loader screen, but then during the flash of the signed rom (1.37.456.2) i found that the version for boot loader is SPL-1.40.OliNex .
Now all is working fine, thx guys!!!
1 more question, if i have the hard spl installed, flashed a new rom. What should i do if i wanna flash another rom? (let say, after RUU-1.37.456.2 i wanna flash 1.37.401.3). Should i sspl and hardspl and install the new rom? Or i just simply install the new rom without hardspl again?
Thanks again!!

no, hard-spl is 'permanent' on your device unless you manually revert to stock SPL or something..
just flash another ROM without flashing Hard-SPL again

racerx_ said:
can you follow the steps here exactly and let me know the result?
hard-spl upgrade guide
Click to expand...
Click to collapse
Could you please stop flashing your site all the way here? Here at XDA there is a lot of info how to flash your phone, it is not needed to flash your site all the time here. One time is enough.

i'm not 'flashing' my site.. if one time was enough he would have already gone through the guide. i didn't even MENTION the site, either, simply gave him a link to the guide. if you take time to read the thread you'll find that it actually helped him get hard-spl on his diamond which is why the site was created so we can minimize these kind of questions and threads in the forums.. if you spent more time actually helping people instead of writing ridiculous posts like this maybe we'd have a cleaner and more productive forum

Thankz guys thatz helpful

racerx_ said:
if you spent more time actually helping people instead of writing ridiculous posts like this maybe we'd have a cleaner and more productive forum
Click to expand...
Click to collapse
I'm sorry? Ridiculous posts?
I don't take you serious anymore. Saying that i am posting ridicolous posts while you are spamming all the way in here.
I just asked it friendly and now again, stop spamming your site. I find it in every support topic now a days and you are telling ME about a cleaner and more productive forum???
The info you have on your site is the same info as what can be found in here.

sumitescp said:
maybe you installed the rom using sspl
Click to expand...
Click to collapse
not possible, at all, and don't try either, you could screw the device up if you try to flash a ROM we signed.

Yzord said:
I'm sorry? Ridiculous posts?
I don't take you serious anymore. Saying that i am posting ridicolous posts while you are spamming all the way in here.
I just asked it friendly and now again, stop spamming your site. I find it in every support topic now a days and you are telling ME about a cleaner and more productive forum???
The info you have on your site is the same info as what can be found in here.
Click to expand...
Click to collapse
Is it me, or does his site look like a rip-off of mrvanx.org ?

Yzord said:
I'm sorry? Ridiculous posts?
I don't take you serious anymore. Saying that i am posting ridicolous posts while you are spamming all the way in here.
I just asked it friendly and now again, stop spamming your site. I find it in every support topic now a days and you are telling ME about a cleaner and more productive forum???
The info you have on your site is the same info as what can be found in here.
Click to expand...
Click to collapse
ya, ridiculous cause there is no step by step upgrade guide with pics in the forum, and yeah all the info was there, but obviously some ppl have trouble reading so i gave him the info he needed. You on the other hand have yet to say anything helpful in this thread. So stop being a troll and post something useful. this will definitely be the last reply i waste on you
Olipro said:
Is it me, or does his site look like a rip-off of mrvanx.org ?
Click to expand...
Click to collapse
i think it looks like the stock Joomla template that comes with a Joomla installation cause i couldn't find a cool enough template for this site Actually, i offered to help MrVanx add a trinity section to his site before i started my previous site, but no reply so i decided to help some non-hermes users.. this sure is a lot of drama for trying to help people with their noob questions

racerx_ said:
...I think it looks like the stock Joomla template that comes with a Joomla installation cause i couldn't find a cool enough template for this site Actually, i offered to help MrVanx add a trinity section to his site before i started my previous site, but no reply so i decided to help some non-hermes users.. this sure is a lot of drama for trying to help people with their noob questions
Click to expand...
Click to collapse
I like the site and the content. Update it always like MrVanx did before to his info site. There's no harm done here.

Installing a New ROM on T-mobile Dash

I have been looking through this forum and havent come across exactly how to install a new ROM on my t-mo dash... So I am sorry if these are dumb questions... But I do have a touch pro 2 and they explained to me how to install a new ROM on it. Is it the same concept for the Dash? Do I have to flash it with an SPL? If someone could explain all this to me it would be appreciated, or if you could direct me to a part of the forum that will assist me. I want to change the ROM on my dash for practice before I do my TP2...

I'll explain the forum has a sticky & the top take your time to read........... Does say read before posting so as to stop ?'s that are already answered........
The choice if HSPL is yours most people don't but is available in sticky, the noobs guide to flashing is there too.
Good luck.

stylez said:
I'll explain the forum has a sticky & the top take your time to read........... Does say read before posting so as to stop ?'s that are already answered........
The choice if HSPL is yours most people don't but is available in sticky, the noobs guide to flashing is there too.
Good luck.
Click to expand...
Click to collapse
I couldn't have said it better myself