THIS METHOD IS ONLY FOR TRADITIONAL CHINESE
i think there is several hong kong or twiwan user of WM6.1 KisS20.4 Rom here..
this is my first time flash my rom in english......
after flash..i found that it is a very good rom that run fast and smooth..
however,i found that it is not available that install ce-star or monstar chinese with the UC package with M2D....
i like this rom and thank spocky12 very much
after i try more than 20 methods...i find several software is available for type and read chinese with M2D and run smooth....
i suppose all of you have this rom
here you go!!!!
1.Install UC package With M2D
2.go start->setting->system->remove program
DelETE the fontchange
3.download this..
http://www.sendspace.com/file/9it37b
install it
4.this is a typing method which hong kong user know about that..
筆劃輸入法
http://www.badongo.com/file/9838987
soft reset
5.go HKLM/software/Microsoft/Fontlink/SystemLink
HelveticaNeue LT 35 Thin=RAMdisk\Windows\Fonts\MSYH.TTF,微软雅黑
HelveticaNeue LT 55 Roman=RAMdisk\Windows\Fonts\MSYH.TTF,微软雅黑
SOFT RESET..FINISH~
Great Job!!!
I am a HK user, and i have searched this great job for 6 months, but I still cannot find any posts except this post that teach traditional chinese's user to flash UC rom and make it to read and type traditional chinese.
Thank you very much, however, i will try this method for my KS20 after spocky12 release the new rom soon.
p.s. Thank you for spocky12
Great job bun_0806 !
I've updated first post of KisS20 thread to add a link here.
Thanks
I remember to have installed Ce-star after flashing spocky's rom. But after many bugs I simply removed Ce-star. Then I preferred installing a single font with respective registry modifications. By the way I'll try your method to see if it will give any different result. Thank you
Lemark
may you upload some detail for me?
i want to try your method
bun_0806 said:
Lemark
may you upload some detail for me?
i want to try your method
Click to expand...
Click to collapse
You can put your font in the windows directory of your phone and then modify the registry values. I have msyh.ttf (font name YaHei) for example, so I need to modify the registry values under
[HKEY_LOCAL_MACHINE\Software\Microsoft\FontLink\SystemLink]
as
"YaHei"="\\Windows\\tahoma.ttf,Tahoma"
"Tahoma"="\\Windows\\msyh.ttf,Yahei"
"Courier New"="\\Windows\\msyh.ttf,YaHei"
"Arial"="\\Windows\\msyh.ttf,YaHei"
"Times New Roman"="\\Windows\\msyh.ttf,YaHei"
Main disadvantage of this method is that non-unicode Chinese characters become gibberish. Also China will still be unavailable in the regional settings.
Your method is superior to mine as it can truly enable Chinese support
The cab file in following link will install a font and modifies the respective registries. You can install it on top of Spocky's rom. It was made by someone named samau, so all credits should go to him.
http://www.megaupload.com/?d=JK4PDYWK
http://www.rayfile.com/files/e6e3307d-f9f3-11dd-b9f8-0014221b798a/
support and display T.Chinese
hi all~
there is a useful site included how to make eng wm to support T.Chinese and change the interface to T.Chinese that i found.
http://www.studiokuma.com/wm/?section=support
i tested on my ks20 with KisS20.4 Rom already.
it can be read and write/type chinese perfectly, write chinese meaning it support handwriting input But, the problem is cannot use PlumSIP6 after that. Can anyone solve it??
finally, i havn't test the chinese interface, if anyone interest, go try and report.
Here, I hope someone can develop a perfect T.chinese version rom for HK ppl, the original rom in HK was very very weak...
Thankyou!
**Remark** install Enable_No_Policy.cab first before you do anything is a must.
karltong said:
hi all~
there is a useful site included how to make eng wm to support T.Chinese and change the interface to T.Chinese that i found.
http://www.studiokuma.com/wm/?section=support
i tested on my ks20 with KisS20.4 Rom already.
it can be read and write/type chinese perfectly, write chinese meaning it support handwriting input But, the problem is cannot use PlumSIP6 after that. Can anyone solve it??
finally, i havn't test the chinese interface, if anyone interest, go try and report.
Here, I hope someone can develop a perfect T.chinese version rom for HK ppl, the original rom in HK was very very weak...
Thankyou!
**Remark** install Enable_No_Policy.cab first before you do anything is a must.
Click to expand...
Click to collapse
HAY GUY...the file i uploaded is the full version of MSJH.TTF
the file you find in KUMA is good but not function on kiss 20
because it will reload the wince back to your ppc
it will lead many many problems there
for example...you have to reset your ks20 successful more than 10 times
hi bun,
thanks a lots, your method can run chinese smoothly, but I get some problem when I use, detail as below:
after upgrade WM6.1 KisS20.4 Rom, this rom is fastest and stable one that I try in my KS20, after upgrade all sim card cannot work. I use this phone in Hong Kong and had tried 3 Hong Kong (3G), PCCW (3G), People and China mobile sim card also. All have same problem - cannot register the network.
I also copy the xml from HK10a rom of HK telecom provider in /windows/networkprofile, can select my telecom provider name but also the same.
After I flash back HK 10a.rom (http://rapidshare.com/files/12754205...2008_.rar.html), now the phone still the same cannot register any network, but can search its own network.
I use LGMDP_EURO to flash the rom in emergency mode with unbranded rom (since I heard all HK LG ks20 is unbranded) KisS20.4Rom
Now even I flash other rom still get the same problem.
please help, thanks
pinstudio said:
hi bun,
thanks a lots, your method can run chinese smoothly, but I get some problem when I use, detail as below:
after upgrade WM6.1 KisS20.4 Rom, this rom is fastest and stable one that I try in my KS20, after upgrade all sim card cannot work. I use this phone in Hong Kong and had tried 3 Hong Kong (3G), PCCW (3G), People and China mobile sim card also. All have same problem - cannot register the network.
I also copy the xml from HK10a rom of HK telecom provider in /windows/networkprofile, can select my telecom provider name but also the same.
After I flash back HK 10a.rom (http://rapidshare.com/files/12754205...2008_.rar.html), now the phone still the same cannot register any network, but can search its own network.
I use LGMDP_EURO to flash the rom in emergency mode with unbranded rom (since I heard all HK LG ks20 is unbranded) KisS20.4Rom
Now even I flash other rom still get the same problem.
please help, thanks
Click to expand...
Click to collapse
are you lost your NV FILES?
is possible to have handwriting for chinese
Related
It's have been released already the P535 english version... even sold on Ebay.... there's some good soul that would supply image of this ROM? so i can finally install in my chinese version?!!? thanks!
It seems ASUS has just posted it at their website... ftp://ftp.asus.com/pub/ASUS/IA/P535/V4315_WWE_MS00.rar
but I'm not sure is it an English ROM as no instruction yet. Pls try it with precaution!
Besides, you may need other tools to switch the location lock, but I don't know where to get it.
Cheers,
A_C
WWE == world wide english
Its about time!!!!!
Guys this is my first time installing a new ROM, can anyone please give me a full installation instructions??? Thanks!!
A_C u are the best!!!
Thanks A_C! Really on time!
Also, quite curious! they released also one version:
P535_V4315_WWE_TH00.rar and V4315_WWE_MS00.rar in same folder! I will check what's difference! Thanks!
Sorry that finally figure out the MS00 is only for Malaysia while TH00 is only for Thailand... hope no one gets hurt.
Asus PDA Phone P535's latest firmware for Malaysia
Additional features and improvements:
1. Improve communication stability of phone and GPRS.
2. Improve noise during camera preview.
3. Improve stability in idle mode.
4. Improve stability in A2DP connection.
5. Improve keypad reaction time.
6. Improve volumn stability during communication in earphone, headset or Bluetooth headset.
7. Improve WiFi WPA-PSK connection stability.
8. Change partitial system message description.
9. Improve security for My Secret Folder.
10. Improve driver will fail to connect to a WPA AP when the process of reconnect failed.
Caution:
1. Do not upgrade to different language or regional version onto your PDA Phone.
2. Please also install phone module firmware V4.3.0 or above.
3. After the installation, previous data will not be found.
Please backup by using bundled backup software before installation.
4. After the installation, please go to "Start"=>"Programs" and restore back to default.
Cheers,
A_C
Bummer!!!
Do you think that they will release also a HK version?
or is it possible to edit this one to work also on HK version?
Hey guys,
I've just picked up a french P535 while on holiday here in France. Has anyone tried flashing the WWE ROM to a non-English phone? I'm afeared of bricking my device, but my English is much better than my française, and it would be nice to have the device in English.
I've decided to just grab my cajones and go for it.
I've installed the 4.3.0 worldwide boot ROM firmware and that was happy, then downloaded the P525 cooked ROMs to get the ASUS language unlock utility, and ran that. It reported my country code as 420c (France) and proceded to unlock the device, so all should be well. I'm downloading the Malaysian WWE 4.3.15 firmware now, and will report back with how it goes once it's on the phone.
Wish me luck!
(for some reason I'm only getting 5kb/s off ASUS' ftp server, so could be 30 mins or so...)
Ok, update...
The WWE firmware won't apply using the ASUS autoupdater. I'm able to get into the bootloader flasher by holding Power-Record-Camera and hitting reset, but it complains about not finding ROMGalaxyII.nb0.
I understand that this is the decrypted version of the ROM update, but I don't know how to get that from the WWE firmware I have. Is anyone able to help me work this out?
Thanks in advance.
couldnt you use the p525romtool -d command as explained in the p525 rom cooking thread
JJ15k said:
couldnt you use the p525romtool -d command as explained in the p525 rom cooking thread
Click to expand...
Click to collapse
No as apparently the ROM structure, however I've just found out you can flash the 535 roms using the 525 patched Autorun.exe, see http://forum.xda-developers.com/showthread.php?t=284379 for details if anyone is interested in upgrading their 535.
Did you try falshing with this patched autorun?
That's what I mean yeah, I have a P535 I bought in France, I've now got a WWE ROM on it after using the patched autorun. All it does is hand the ROM to the BIOS's bootloader flash program, bypassing the region check the official one does.
Allright I will try too.
I live in france but I have all my IT in english, plus I use qwerty KB.
Thanks for the heads up, I ll report soon.
Well, I did try the update and it worked. I don t think I would have found the trick of putting a galaxy.cap with the hacked autorun the bypass the langage check without you/pntzamaras.
Now I have the qwerty kb and consistent language on my device!
I hope they release a french ROM someday so I could sell it to fund my next purchase
JJ15k said:
Well, I did try the update and it worked. I don t think I would have found the trick of putting a galaxy.cap with the hacked autorun the bypass the langage check without you/pntzamaras.
Now I have the qwerty kb and consistent language on my device!
I hope they release a french ROM someday so I could sell it to fund my next purchase
Click to expand...
Click to collapse
Sorry but could you explain all the steps you followed to reach this successful upgrade?
Sure:
1) Download the sorg p525 cooked rom in the forum thread.
2)Download the p535 ROM.
3)Extract the p535 ROM and the p525 archive
4)Replace in the 535 ROM the autorun.exe by the one in the p525 archive.
5)Put the unlocklangID.exe utility in the same dir as the autorun you just overwrited.
6)Rename GalaxyII.cap to Galaxy.cap and put another copy of galaxyII.cap in the same folder (ie: instead of having just GalaxyII.cap you have the same file twice, named GALAXY.cap and GalaxyII.cap)
7)Put the 535 rom where you replaced the autorun on the SD card.
At this point you should have on your SD card the 2577 folder with autorun and unlocklangid.exe, and in the root, GalaxyII.cap and GALAXY.cap.
8)Insert Card and run the unlocklangdID utility.
9)Run the autorun, it should say the update is ok for your device, click file-update.
10)After you reset the flash utility appears and the device begins flashing, it takes around 5 min.
PERFECT !!!
Thanks you so much !!
hi, thanks so much for posting the solution.
on a side note, how long does it usually take for the P535 to connect to a WPA-PSK AES encrypted network?
it used to be fast before i changed to the WWE interface as per the instructions, but now the phone seems to be stuck in the authentication stage and will not be assigned an IP address by the router.
although when i turned off the wireless security, i was still able to connect to my unsecured network quickly.
Hi!
Some days ago I have bought an Asus P535.
The S.O.'s language is ITALIAN....well, I have understand how change it to WWE....however, I don't understand Which ROM I can use !
On the Asus's site, there are the only (newest) firmware that I have found:
V4.3.25 (ONLY for Hong Kong user) - 47mb
V4.3.25 (ONLY for Taiwan user) - 47mb
...where is an WWE rom ???
P.s.
I have also found a "P535 Phone Module Firmware V4.5.0 - 1mb"
...is for ALL LANGUAGE ???
nobody ???
AX3L said:
...where is an WWE rom ???
Click to expand...
Click to collapse
ftp://dlsvr01.asus.com/pub/ASUS/IA/P535/
Any rom with WWE in the name will do.
Use the instructions here:
http://forum.xda-developers.com/showthread.php?t=295778
I have also found a "P535 Phone Module Firmware V4.5.0 - 1mb"
...is for ALL LANGUAGE ???
Click to expand...
Click to collapse
yes.
I haven't upgraded the rom myself, but I have installed that phone firmware upgrade on an australian rom.
And no, I don't know where to get the australian rom - the shop installed it for me and refused to give me a copy.
I found:
P535_V4315_WWE_TH00.rar
and
V4315_WWE_MS00.rar
which one is the newest??
try using an ftp client.
an alternative ftp site, which has the same files:
ftp.asus.com.tw/pub/ASUS/IA/P535
ok tnks....however,
which one is the newest??
Tnks again!
the one with the highest version number
That would be 4.3.15 for the wwe version.
There's a couple of roms with 4.3.35 version but those are for taiwan and hongkong.
I've seen someone mention that the russian (RU) version has some russian rubbish that you do not want/need, so I suggest you go for the thailand (TH) or malaysia (MS) version.
I have never tried to change rom myself, so I am afraid I am unable to help you if you run into trouble. But please post your results, I want to try it at some point.
so....
TH = Thailand
and
MS = Malesia
????
Both are in english/WWE ???
As I said, I have not done this upgrade myself.
Read the thread I linked to above. It should answer a few questions.
But as I understand it, both of these are WWE yes.
bredita said:
the one with the highest version number
That would be 4.3.15 for the wwe version.
There's a couple of roms with 4.3.35 version but those are for taiwan and hongkong.
I've seen someone mention that the russian (RU) version has some russian rubbish that you do not want/need, so I suggest you go for the thailand (TH) or malaysia (MS) version.
I have never tried to change rom myself, so I am afraid I am unable to help you if you run into trouble. But please post your results, I want to try it at some point.
Click to expand...
Click to collapse
So far in this forum the ROM upgrade was academic.
Here is reality
My P535 is bricked!!
During Rom Update (following all the rules as posted) The process stopped.
It gets stuck on the start menu (Asus Screen).
The Hard reset does not work. ( Reset + Power button).
I can get to the bootloader screen (Power button + right mike(?) button+Reset)
and it just shows a screen with the waiting on.
Anyboby , can you help. Can I do hard reset another way?
It seems that ASUS offers the Rom Update if your ASUS P 535 is running and from the Mini sd card.
All the other Phone PDAs I had before (Qtek 100,s200, O2 atom, HP rw 6828. HTC (Dopod m700) P3300, HTC (Dopod D810) P3600 the bootloader did get the ROM Update file from the PC while in Activ Sync with the USB port. The bootloader in the ASUS products works differently.It does look for the usb connection but the ROM is in the miniSD. Am I doing something wrong?
Can someone point out the error of my ways?
Thanks in advance
I'm sorry to hear that. Very sorry.
I don't know if you did anything wrong. I also have an I-mate K-Jam (HTC Wizard) and it seems easy to recover from a failed upgrade on the wizard.
I haven't seen similar stories about the P535, so don't (yet) know a way to recover from a failed upgrade on the P535. But I will let you know if I find/read about a way to do it.
Maybe you could try contacting the author of the only "homebrew" ROM I know about - his webpage is here: http://norad.shacknet.nu/lifeforce/ and he has a feedback-form for bug reports. He is probably much more experienced with rom updates than I am, so it's worth a try.
(he has also posted an announement for his homebrew rom on xda-dev here: http://forum.xda-developers.com/showthread.php?p=1235311)
I thought the hard reset combo was up+reset...
Maybe it only works if the OS is running - I don't know.
I had an idea:
I tried using the p525 rom tools (http://forum.xda-developers.com/showthread.php?t=284379) to extract "RomGalaxy.NB0" from GalaxyII.cap, and I managed to extract it:
C:\P525RomTool11>P525RomTool.exe -d GalaxyII.cap
ASUS P525 ROM Tool 1.1
Converting ... DONE, to ROMGalaxy.NB0
Click to expand...
Click to collapse
But - I have read that the p525 rom tools don't work on p535 roms (http://forum.xda-developers.com/showthread.php?t=284379&page=7) - so I don't know if this NB0 file is useless/has the wrong checksum or whatever...
If you want you can try the rest of the procedure (I don't dare trying on my own phone):
- flash this NB0 file via the bootloader as it's described (in step 6) in the p525 thread I mentioned above:
Flash ROMGalaxy.NB0 via bootloader (copy it to SD card root, press "camera" fully, press reset).
Click to expand...
Click to collapse
Maybe there's another button combo you have to press on the P535 - Maybe the one you use on your P535 to get into the bootloader - I don't know, I'm just guessing.
Maybe the NB0 file needs to have another name - ROMGalaxyII.NB0? I don't know this either.
I guess this wasn't much help... Let's hope someone more experienced than me can come up with something better...
I downloaded that homebrew rom I mentioned: http://norad.shacknet.nu/lifeforce/ today.
It comes with the following install procedure:
Flashing:
1. Disable USB ActiveSync.
2. Push Off button + rec. button + nav. up + reset 5sec.
3. connect the PDA to PC
4. Start AsusUpdateROM.cmd
Click to expand...
Click to collapse
Which means it does not install from an SD card.
Try that one, see if it works.
P535 ROM update wrong!!!
I need Russian firmware, but my ASUS P535 write "Extended ROM update cannot be Applied to this region's version!"
My ROM version V4.3.15 WWE_EE00 I need upgrade to V4.3.15 WWEL_RU?
What it's doing?
Pleas help my!
Thanks!
turbodebeselis said:
I need Russian firmware, but my ASUS P535 write "Extended ROM update cannot be Applied to this region's version!"
My ROM version V4.3.15 WWE_EE00 I need upgrade to V4.3.15 WWEL_RU?
What it's doing?
Pleas help my!
Thanks!
Click to expand...
Click to collapse
Read.
Read this thread again. Follow the links in the 3rd post and read them threads too.
not kirilica menu
I upgrade to my ASUS P535 to V4.3.6 WWEL_RU but... i not have all russich menu. I need all meniu in kirilica see :-(
turbodebeselis said:
I upgrade to my ASUS P535 to V4.3.6 WWEL_RU but... i not have all russich menu. I need all meniu in kirilica see :-(
Click to expand...
Click to collapse
I don't know if the russian rom has russian menu.
I've seen someone mention that it is mostly english with a few russian add-ons.
But I'm not sure - maybe asus russian website (if it exists) can tell you if the russian p535 has russian or english menus?
bredita said:
I don't know if the russian rom has russian menu.
I've seen someone mention that it is mostly english with a few russian add-ons.
But I'm not sure - maybe asus russian website (if it exists) can tell you if the russian p535 has russian or english menus?
Click to expand...
Click to collapse
It is WWE with some russian add-on, but 99% of the ROM is in english. On the other hand, the device's extrom contains a language extender (in my case this is Hungarian), and it installs during the first booting process along with some network settings. I believe that the russian P535's has the same LENg (of course with russian language).
Read my siggie (signature)...
So where do we stand
Dears
I have the same issue. I have a german Asus P535 and looks like nobody has a solution to change the language.
Anybody interested in exchangin a german phone agianst French or English ?
Thanks
What’s in P3600i ? (Also called CHT9110 or D810x)
Recently I bought a new Trinity~CHT9110 that is known
as P3600i or D810x in other countries.
The WM6 ROM of my new Trinity is in Chinese Traditional Version.
The hardware differences between P3600 and P3600i are
CPU 400Mhz upgraded to 500Mhz and storage memory
128MB upgraded to 256MB. ( Please see cap01)
I post what I found with P3600i in these days and
hope every body provides what they found as well
so that we can gather enough information to deal
with P3600i.
1) We can’t use any non-official ROM update utilities
to flash P3600i :
The Hard-SPL, CID unlocker, SSPL-TRIN or any other
update utilities couldn’t work for P3600i.
I tried to down grade to WM5 ROM, and it also failed
at 1%. I hope somebody can work out a new patch
that works..
2) Currently the only way to upgrade the Radio
ROM of P3600i to 1.50.08.11:
Originally the radio version of P3600i is
1.46.00.11
32.79.7020.19H
The radio update utility couldn’t work, either.
So currently the only way for us to upgrade to
1.50.08.11
32.83.7020.20H
is to download official upgrade ROM that is with
new radio version.
The latest official WM6 Chinese Traditional version
has updated to radio 1.50.08.11. So I can update
my new Trinity by flashing the entire official ROM.
(Please see cap02)
3) P3600 and P3600i use the same WM6 ROM:
In fact, the latest official WM6 ROM mentioned above
is released for CHT9100 (or P3600, D810) in HTC’s
web site.
I use this ROM to flash CHT9110 (or P3600i, D810x)
and it works perfectly without any error.
So we get a conclusion that the WM6 ROM released
for P3600 is the same as that used in P3600i.
4) The Extended ROM of CHT9110 (or P3600i,
D810x) has write-back design:
I found a way to mount the Extended ROM and
delete all the files in it. Just follow the two steps:
HKEY_LOCAL_MACHINE / System / StorageManger / Profiles / EXT_FLASHDRV /
----> Modify the value of MountHidden from “1” to “0”.
HKEY_LOCAL_MACHINE / System / StorageManger / Profiles / EXT_FLASHDRV / FATFS /
----> Modify the value of EnableCache from “0” to “1”.
Please see cap03. The Extended ROM is totally 9.94MB,
7.51MB in use and 2.43MB free. You can view all the
Extended ROM files in cap04.
After modify the registry, you can delete all the files
in the Extended ROM. If you occur the “ Action Failed”
notification, just try again and then the Extended ROM
becomes 0 MB in use.
(Please see cap05)
You can also try copying some files into the
Extended ROM.
But after a soft reset, the files you put into
Extended ROM disappeared and the original files
of Extended ROM are all written back to it.
5) There is one more different file in CHT9110’s
Extended Rom than CHT9100’s.
PT_Enable_WCC.cab
----> I don’t know what’s the usage of this file
This is very useful information. Can I ask you please where can I find the updated ROM you have mentioned, with the new radio??
---quoted
So currently the only way for us to upgrade to
1.50.08.11
32.83.7020.20H
is to download official upgrade ROM that is with
new radio version.
The latest official WM6 Chinese Traditional version
has updated to radio 1.50.08.11. So I can update
my new Trinity by flashing the entire official ROM.
Does this also mean that the wm6voip.cab wont run on the P3600i?
can you upload the full official p3600i ROM with radio version 1.50 to rapidshare?
also, can you test cpu usage when using stylus, on P3600 there is some issue with this, for example when you play some games and use stylus to navigate frame rate drops considerably, I'm just courious if this has been fixed..
yeah I want to know too
from teh HTC web site I can't find the ROM you mentioned above
A leakage of HTC's download website
SeaPea said:
This is very useful information. Can I ask you please where can I find the updated ROM you have mentioned, with the new radio??
Click to expand...
Click to collapse
I found a method that works currently to download
official WM6 ROM of different languages from HTC’s
website.
I guess HTC might close the download access if they
find the leakage mentioned below.
First, go to the HTC’s worldwide website:
http://www.htc.com/
Select the Region & Language you prefer.
Try to join the membership for free~ choose the way
that doesn’t need any purchased device s/n number.
For example, you select Australia-English.
Choose “Service & Support” --> “Download Now”
--> “Join Now, Go”
Then complete the Join Member Process.
If you choose Hong Kong-繁中(Hong Kong- Chinese Traditional)
or Taiwan-繁中(Taiwan-Chinese Traditional),
just choose “會員專區”(Member District)
--> “加入會員”(Join Membership)
Second, go to the official WM6 download website:
http://hsc.asia.htc.com/e-club/download/login.aspx
Select the language and region you’ve just join a membership.
Then you can see the latest WM6 ROM of that language.
HTC provides this rapid download website to customers
due to that the official websites often got stuck when
the WM6 first released in July.
You can join the membership in the www.htc.com website
then go to this rapid download website to log in and enjoy.
I have log in all the different regions and languages that HTC provided.
Only the Taiwan (Chinese) version has the latest radio
ROM of 1.50.08.11.
As you can see in the shortcuts below.
I wonder if you can use the Taiwan (Chinese) version
since you might not buy the CHT9110 in Taiwan.
Please note that the Hard-SPL, CID unlocker or SSPL-TRIN couldn’t work for P3600i.
Please also note that all the wm6 roms are for d810, p3600 or cht9100.
But until now I can get the cht9100 wm6 rom work perfectly for my cht9110,
nice exploit!!!
here is the direct link to the firmware...
http://210.64.124.194/download/CHT9100_TWN_WM6_Upgrade_20070705.zip
Thks for information, I got CHT9110, and have up to latest ROM, but any one can help that I need to flash to WWE (ebglish) Rom, as mention above Hard SPL,CID unlock or any other utility I search and found here can not help to change the rome to English..waiting for help.
to be frank,i won't buy it
kalechen said:
to be frank,i won't buy it
Click to expand...
Click to collapse
For people who are currently using CHT9100, P3600 or D810,
I suggest them to keep using~
it's not very necessary to change from CHT9100 to CHT9110.
But if you are planning to buy Trinity
or your Trinity is broken or got lost,
you are suggested to buy CHT9110
for the following two reasons.
1) CPU speed is promoted by 25%~comparing under the same brand.
2) The flash ROM is doubled~total 256MB, about 168MB available for storage.
That means you don't have to worry about
not enough space for installing progarms in the future.
4) The Extended ROM of CHT9110 (or P3600i,
D810x) has write-back design:
I found a way to mount the Extended ROM and
delete all the files in it. Just follow the two steps:
HKEY_LOCAL_MACHINE / System / StorageManger / Profiles / EXT_FLASHDRV /
----> Modify the value of MountHidden from “1” to “0”.
HKEY_LOCAL_MACHINE / System / StorageManger / Profiles / EXT_FLASHDRV / FATFS /
----> Modify the value of EnableCache from “0” to “1”.
Please see cap03. The Extended ROM is totally 9.94MB,
7.51MB in use and 2.43MB free. You can view all the
Extended ROM files in cap04.
After modify the registry, you can delete all the files
in the Extended ROM. If you occur the “ Action Failed”
notification, just try again and then the Extended ROM
becomes 0 MB in use.
(Please see cap05)
You can also try copying some files into the
Extended ROM.
But after a soft reset, the files you put into
Extended ROM disappeared and the original files
of Extended ROM are all written back to it.
5) There is one more different file in CHT9110’s
Extended Rom than CHT9100’s.
PT_Enable_WCC.cab
----> I don’t know what’s the usage of this file[/QUOTE]
Any ideas on how to flash the extended rom?
I'm guessing that we'd need to complie a new NBH with the desired programs.
I'm using 3600i , and waiting for cooking rom
craig_shih said:
I found a method that works currently to download
official WM6 ROM of different languages from HTC’s
website.
I guess HTC might close the download access if they
find the leakage mentioned below....
[/B][/COLOR]
Click to expand...
Click to collapse
wow, I got it now. and may consider updating it next time when my system hanged. I just got my HK version P3600i one month ago, and in satisfactory performance. Just see if it is worth the while updating the Radio. But will see.
Thank you very much for this leak....
I can get that rom for taiwan site too
thanks
but I dare not flash it as I want to backup the existing rom first.....
there's no method to backup the rom yet.......
I will keep noticing if someone works out the solution for us. I 'll post it here once the solution come out.
Radio rom with Bouygues
Hi
Someone knows if the radio rom of P3600i works with bouygues an if i can put it on my P3600 ?
Thanks a lot
Any New English ROM and radio for P3600i!!
hi25man said:
Any New English ROM and radio for P3600i!!
Click to expand...
Click to collapse
Are you currently using an English Rom? The Rom and Radio listed in your Signature matches mine exactly. And mine is the AUS WWE Rom. And if that's the case, can the others in this post flash this rom to their P3600i's?
SuperSport said:
Are you currently using an English Rom? The Rom and Radio listed in your Signature matches mine exactly. And mine is the AUS WWE Rom. And if that's the case, can the others in this post flash this rom to their P3600i's?
Click to expand...
Click to collapse
Yes, my Rom is an Engish. I am looking forward to using 6.1 & 6.0 cook ROM
My company got some phones to send to the people in China and I'm having some problems getting this Phone to install Windows Mobile 6 Chinese version. I was wonder if anyone could help me out. Here's where I'm at
Microsoft said the vendor HTC doesn't support it but this ROM should work.
Link To Rom:
http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
(I'm using the one that says Chinese Version (CHT))
This is what they sent. Well I've tried using this ROM and I'm getting an 264 Error (I can't read the rest cause its in chinese but it seems from doing some research that it says it can't connect to the Device.) Even though i have it plug in with a USB cable and its at the tri-color screen and says USB.
The Tri-Color Screen Says
Herm200
IPL-1.00
Herm200
SPL-1.10
MS internal use only (side note these were donated from Microsoft)
I've done the HERM_Unlock_v2a and it said success also did the Radio part no problem there either but I still got the same 264 error.
This is for a very very good cause and if I could get some help I'd be really thankful.
Also a stick would be nice
I'm a Chinese user from Hong Kong and I'll try my best to help you out. Just curious, which part of China are you sending the Hermes devices to? Only Hong Kong people use Traditional Chinese, the rest of China use Simplified Chinese.
Are you flashing it with Windows XP or Windows Vista? Have you tried flashing from a microSD card? What are the devices branded as? HTC TyTN, Dopod 838pro, Softbank X01HT or something else? Did you flash HardSPL onto them before flashing the ROM you want?
Phil_123 said:
I'm a Chinese user from Hong Kong and I'll try my best to help you out. Just curious, which part of China are you sending the Hermes devices to? Only Hong Kong people use Traditional Chinese, the rest of China use Simplified Chinese.
Are you flashing it with Windows XP or Windows Vista? Have you tried flashing from a microSD card? What are the devices branded as? HTC TyTN, Dopod 838pro, Softbank X01HT or something else? Did you flash HardSPL onto them before flashing the ROM you want?
Click to expand...
Click to collapse
They are going to the CDC in China. I flashed them with HardSPL and managed to get the ROM to load. Is there a keyboard I can load to them if they want to type in Simplified? Other then CE-Star of course. Looking for something free. Or do you have a ROM that has simplified on it? I contacted microsoft and they said they didn't have it which I found strange the ROM i linked from earlier is the only one they know about. 10 bucks says I wasn't talking to the right person that would know.
The guys down here in Atlanta said that most people and China can read Traditional just most can't type it. So if I can find a keyboard to load on all these phones we should be okay. Sorry its taking me so long to respond I've been loading phones for 2 or 3 days now
Oh and its Windows Mobile 6 and HTCs
cobra2497 said:
They are going to the CDC in China. I flashed them with HardSPL and managed to get the ROM to load. Is there a keyboard I can load to them if they want to type in Simplified? Other then CE-Star of course. Looking for something free. Or do you have a ROM that has simplified on it? I contacted microsoft and they said they didn't have it which I found strange the ROM i linked from earlier is the only one they know about. 10 bucks says I wasn't talking to the right person that would know.
The guys down here in Atlanta said that most people and China can read Traditional just most can't type it. So if I can find a keyboard to load on all these phones we should be okay. Sorry its taking me so long to respond I've been loading phones for 2 or 3 days now
Oh and its Windows Mobile 6 and HTCs
Click to expand...
Click to collapse
In case you flashed CHT Rom, I suspect, simplified Chinese character set is not loaded at all. No matter what keyboard you use no way to show simplified characters, respectively the typing will be for traditional only.
There is a MS SIP for Chinese characters, but honestly I found it not that good as CE-Star. Dont have a link but believe you can find it on MS sites
There is another SIP named PlumSIP, which I use, but only the version for hardware keyboard. I found it very convenient. Search google and sure will find a link to dev page.
btw, I use english Rom with installed Chinese characters support - works very well for me - no probs with text, e-mails and surfing internet
If you can read chinese. go to this forum http://bbs.xbeta.cn there's a chinese rom for the hermes and has chinese read/write capability.
In this case, I suggest you go to the most popular PDA forum in the main land of China and the web site is bbs.pdafans.com. You can find all kinds of CHS roms for Hermes and most of them are very good.
I'm in China main land and I'm using Hermes as well, but I'm running WWE rom on my hermes as I prefer to official rom's I just replace the original file wince.nls with another one which Chinese is supported with and add Chinese fonts and tweak registry. As a result of all what I do, simply Chinese is supported very well in a WWE rom.
I'm hoping this helps.
I believe this is what you need. I think you need to register to view the post.
http://bbs.xbeta.cn/viewthread.php?tid=7821&extra=page=1&filter=type&typeid=53
seasky3246 said:
In this case, I suggest you go to the most popular PDA forum in the main land of China and the web site is bbs.pdafans.com. You can find all kinds of CHS roms for Hermes and most of them are very good.
I'm in China main land and I'm using Hermes as well, but I'm running WWE rom on my hermes as I prefer to official rom's I just replace the original file wince.nls with another one which Chinese is supported with and add Chinese fonts and tweak registry. As a result of all what I do, simply Chinese is supported very well in a WWE rom.
I'm hoping this helps.
Click to expand...
Click to collapse
Hi, can you go into a little more detail about which replacement wince.nls you use and the other mods you do to increase your CHinese support? I currently run a wwe ROM with chinese fonts and input added by cab files (CE-Star sucks but it's all there is and I have no idea why there is nothing better when the market for something as good as the vista Chinese IME would be HUGE)
thanks!
mlalahoi said:
Hi, can you go into a little more detail about which replacement wince.nls you use and the other mods you do to increase your CHinese support? I currently run a wwe ROM with chinese fonts and input added by cab files (CE-Star sucks but it's all there is and I have no idea why there is nothing better when the market for something as good as the vista Chinese IME would be HUGE)
thanks!
Click to expand...
Click to collapse
I'm a Traditional Chinese user so I can't help you with Simplified Chinese input right now.
I use WWE ROMs on my X01HT, replaced the wince.nls, installed "CHT_IME_QVGA_F.cab" ripped from a official ROM for Traditional Chinese input (Chu on/Changjie keyboard input, Handwriting recognition) and a 14MB Microsoft JhengHei Bold font. Now it is capable of writing Traditional Chinese and viewing both Simplified Chinese and Traditional Chinese, Japanese, and Korean.
Wince.nls:
http://www.sendspace.com/file/cv2n4u
CHT_IME_QVGA_F.cab:
http://hn801.hkes.com/Data/SIP/CHT_IME_QVGA_F.zip
I saw somebody will come CDC in China, they are our counterpart.
I am working at US Embassy CDC department in China Beijing, If you have any problem with Herm200, please contact me, I can update this phone operating system to Chinese version.
My email: [email protected]
adminsun said:
I saw somebody will come CDC in China, they are our counterpart.
I am working at US Embassy CDC department in China Beijing, If you have any problem with Herm200, please contact me, I can update this phone operating system to Chinese version.
My email: [email protected]
Click to expand...
Click to collapse
We have a bunch of phones that I think are heading towards you. Not really sure I know there is some stuff going on this week. Had to take emergency leave last week so thats why I haven't been on here. PM me if you read this I will give you more details and call you.
adminsun said:
I saw somebody will come CDC in China, they are our counterpart.
I am working at US Embassy CDC department in China Beijing, If you have any problem with Herm200, please contact me, I can update this phone operating system to Chinese version.
My email: [email protected]
Click to expand...
Click to collapse
I sent you a PM. The guys left out this morning so I don't think you will see them till Monday or it could be all the way till Wednesday. Depending on what goes on.
cobra2497 said:
: Need Help with ROM install its for CHINA (come quick) ......
Also a stick would be nice
Click to expand...
Click to collapse
hahahhahahahahahahahahahahahhahahahahhahahahhahahahahahaha
mlalahoi said:
Hi, can you go into a little more detail about which replacement wince.nls you use and the other mods you do to increase your CHinese support? I currently run a wwe ROM with chinese fonts and input added by cab files (CE-Star sucks but it's all there is and I have no idea why there is nothing better when the market for something as good as the vista Chinese IME would be HUGE)
thanks!
Click to expand...
Click to collapse
Hey, I'm not sure if you have got this issue resolved. Here the following is what I usually do after a hard reset or flashing a new WWE ROM.
1. Replace with the original wince.nls file in \windows wiuth the one attached below. You can do this with resco file explorer or other app.
2.Copy the Chinese font file to \windows.
http://rapidshare.com/files/121391687/msyh.ttf
3.Implement a registry import for the fonts as attached file Reg Fonts.zip to get a good look.
4.Tweak the registry as following:
add HKEY_LOCAL_MACHINE\System\GDI\FontLinkMethods=1(string)
Then Chinese performs perfect in a WWE ROM. And also you can choose Chinese PRC in Regional Setting page.
Hi
this might be very stupid question
i have a htc tytn
i cant seems to see a /windows folder i only see " my windows base devics"
But it does not have the wince file .
What did i do wrong. is this drive not for my devices.
i have scahp's rom install
leetless said:
Hi
this might be very stupid question
i have a htc tytn
i cant seems to see a /windows folder i only see " my windows base devics"
But it does not have the wince file .
What did i do wrong. is this drive not for my devices.
i have scahp's rom install
Click to expand...
Click to collapse
You should see the /windows folder with a file explorer, either the one in the ROM or the well known resco file explorer. But maybe you can not find the file wince.nls as it's hidden by default. You can unhidden all files with resco file explorer and then you can see it. Antually you don't need to see this file. Just put the wince.nls attached in /windows folder and press OK to replace the original file.
Hi All
i am very new in this handheld business and before i go ahead and crash the device i thought i could get some assistance , i already read some of the threads regarding from french to english and chinese to english.My thing is i just bought this yesterday in italy and once i get started with it . reallized that the whole thing is ,in italian its from a cell provider called TİM in italy.So can anyone guide my step by step what to do in order to make this device all english
İ really appreciate all your help folks
You must download from ASUS 2 firmwares, ENG and CHN.
Extract in your SD the folder 2577 from ENG version
Overwrite autorun.exe in SD\2577 with the one in CHN version.
Put your SD in your p320 and play!!!
The difference is in autorun.exe, chinese version doesn't check language, so you can flash what you want!!!
Thanks i will try it as soon as possible , since i work on a cruiseship , the internet connection is very bad , so first i have to get the chinese firmware since i have the the ENG version , from the CHN version i just need the autorun.exe nothing else right and delete the autorun from the ENG version.
I ll give it a try and post it but really appreciate it
ASUS TIM Italina to English language
Hi
i tried to flash the english.bin using the chinese autorun.exe but it still doesn't work , i even tried to flash the whole chinese 2577 file first to see , if that would make a difference , in the end it still gives failed message (during soft reset) or it tells me to ensure its the same language .
So i am looking for other ways.
Please anymore assistance is needed
thats it
no more help i guess from members of this site , very disappointed , i have spoken finally with Asus here and the advised me to sent the device in they will be loading the mobile 6.1 professional english version for $ 30.
Again thanks for those who at least tried to respond to me