Related
I was upgrading my imate jasjar radio to the 1.04.02 version but by mistake i executed the file EnterBL.exe
Now my imate just show a screen with Serial and v1.00 wrote on it!!!....
softreset and hardreset dont work...
please help!!!
It could be worse!
Hold down power and press reset, I think that clears it on JASJAR
hollinshead said:
It could be worse!
Hold down power and press reset, I think that clears it on JASJAR
Click to expand...
Click to collapse
thx but i tried tha and no good
Ok, well to hard reset it, you can hold down the 2 - - at the top of the keyboard, then press reset.
hollinshead said:
Ok, well to hard reset it, you can hold down the 2 - - at the top of the keyboard, then press reset.
Click to expand...
Click to collapse
soft and hard reset dont work too
Now that it is in booloader, try running the entire rom upgrade rather than the radio upgrade
Wiz said:
Now that it is in booloader, try running the entire rom upgrade rather than the radio upgrade
Click to expand...
Click to collapse
very very vey gratefull!!! it worked!!! thx a bunch for the help!
seltun said:
very very vey gratefull!!! it worked!!! thx a bunch for the help!
Click to expand...
Click to collapse
Hello,
Can you explain me the process of ROM Upgrading my Jasjar is dead and when i try to Hard Reset it after pressing 0 ( zero ) it shuts down again. At first i thought it was battery problem but when i replaced the battery i got the same error.
Regards,
ZODI.
ZODI said:
Hello,
Can you explain me the process of ROM Upgrading my Jasjar is dead and when i try to Hard Reset it after pressing 0 ( zero ) it shuts down again. At first i thought it was battery problem but when i replaced the battery i got the same error.
Regards,
ZODI.
Click to expand...
Click to collapse
Please READ the Wiki
Hi Guys,
i think i may have bricked my hermes. my phone froze so i did a soft reset, but everytime i do a soft reset it does not go past the windows mobile 6 screen
If i do a hard reset im stuck on the Hard SPL screen.
Any ideas how i can get it to work again?
or is it bricked?
I have custels rom at the moment
Thanks in advance
moosa19 said:
Hi Guys,
i think i may have bricked my hermes. my phone froze so i did a soft reset, but everytime i do a soft reset it does not go past the windows mobile 6 screen
If i do a hard reset im stuck on the Hard SPL screen.
Any ideas how i can get it to work again?
or is it bricked?
I have custels rom at the moment
Thanks in advance
Click to expand...
Click to collapse
See here:
http://forum.xda-developers.com/showthread.php?t=320903
Hi Thanks for this
Awesome!!!!
moosa19 said:
Hi Thanks for this
Awesome!!!!
Click to expand...
Click to collapse
No probs...
Excuse my poor writing English.
I was cleanig my sd card whith sk tools program, and I made a mistake and clean all files from main memory.
Now I don't have access to the programs, and the soft reset and the camaras buttons don't work.
How can I do a hard reset in these circumstances?
Please help. I really need the phone working.
Thanks.
hard reset is usually done by holding in the top two inner (menu) buttons while pressing the soft reset button, let go the reset button first then when the warning comes on screen release the other 2. Then press call to start the reset process.
Thank you for the answer.
The problem is the soft reset button doesn't work.
Is there other way to do the hard reset?
hard reset
You shold do:
Start>settings>system>clear storage> it is a hard reset too
Surely if the files on the phones memeory has been wiped the pressing the buttons on the handset will be pointless as there will be no programmes/commands linked to them
Sounds pretty serious to me
reset problem
Gift said:
Thank you for the answer.
The problem is the soft reset button doesn't work.
Is there other way to do the hard reset?
Click to expand...
Click to collapse
Maybe you can try a reflash of the rom?
Thank you.
It seems that I have a serious problem.
If somebody know another way of doing the hard reset, please inform.
Gift said:
Thank you.
It seems that I have a serious problem.
If somebody know another way of doing the hard reset, please inform.
Click to expand...
Click to collapse
AeronK 's solution should work fine.
Hard reset how do?
hallo
i have another problem..my XDA ist blocked(security code ist unknown, job of my soon..
when i making hard reset, then XDA in the screen has 3 collored thong with these nr"I PL 1.25.0001 and SPL 1.25.0000"
when i push volume button up or down, with reset button xda start normally but ask for code
What ??is this??
P.S.
and i must wait for acces to enter code 8 to 16 min
Regards for All
Arthur
Ok, seems that the only way is to do a refash of the rom.
How do I make that?
Please help
Thanks.
PS: In the process I hope not to use the active sync, because it doesn't work in my computer
dude i guess you need to reflash the rom
yes you need active synch to run uspl which you need before you flash/reflash a rom
your alternatives
use SD flashing read about it in wiki xda developers i never used it but its there
all the best sincere wishes to recover your pda
Gift said:
Excuse my poor writing English.
I was cleanig my sd card whith sk tools program, and I made a mistake and clean all files from main memory.
Now I don't have access to the programs, and the soft reset and the camaras buttons don't work.
How can I do a hard reset in these circumstances?
Please help. I really need the phone working.
Thanks.
Click to expand...
Click to collapse
just another two thoughts are you aware that if you hold the power button the phone restart it like soft reset!! so i guess you may want to try this b4 anything else i mean hold the two soft buttons & attempt reset via power!!
you may also want to try a programme called IBE Tweaks it has HARD RESET feature built in it!!
let us know how things go
Reflash the rom & dont forget to run a uspl first
After several attempts finally I managed to do the hard reset using the buttons, and my pda is work fine again
In any way, I will try your indications to prevent futures problems.
Thanks jahrami, you have been very useful.
U most welcome so glad u got ur phone back
Congratulations
hi all
i have i-mate pda2. when i updated it and update completed
it stop working , give my only black screen without any words
what can i do plase
amar ali2 said:
hi all
i have i-mate pda2. when i updated it and update completed
it stop working , give my only black screen without any words
what can i do plase
Click to expand...
Click to collapse
have you done the hard reset after flashing?maybe not ryt> if you did try, reflash again...remember hard reset of wm 2003 is different on wm 5 above..
my friend
please can you help me more
i try all ways to restart it
when the update completed the screen become black
and i can't do any thing
and i can't do any update
when i try i found connection error
amar ali2 said:
please can you help me more
i try all ways to restart it
when the update completed the screen become black
and i can't do any thing
and i can't do any update
when i try i found connection error
Click to expand...
Click to collapse
ok..you said you finish the flasing...after that have you perform hard reset?
lets take it one by one..
creso said:
ok..you said you finish the flasing...after that have you perform hard reset?
lets take it one by one..
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=630416
read this from chef tony..if you red it b4..read it again...it will solve your problem 100%
ok
no i didn't hard restart after update
when i finished the phone is be die
plz
my email if you want to talk in messenger for best
[email protected]
[email protected]
i'm online now
thank you too much
i did
i read it
but i can't go to Bootloader Mode and don't see any words on the screen
what can i do more
amar ali2 said:
i read it
but i can't go to Bootloader Mode and don't see any words on the screen
what can i do more
Click to expand...
Click to collapse
do you have full charge of battery before you start the upgrading?
i know that problem
i also had that problem and used to hard reset into bootoptions mode. after that i started via softreset
hope it helps
Hi guys,
Can anyone help me here ?
When I try to start up my Phone, it always loads the bootloader ...
I tried running reflashing a rom and task29, but no help there :s
Does anyone have an idea what to try ?
Tnx
Nick
Some people with the same problem said that their batterie was broken. Can you try another batterie?
I'll give it a try
Will let you know ...
Lennyz1988 said:
Some people with the same problem said that their batterie was broken. Can you try another batterie?
Click to expand...
Click to collapse
Nope, doesnt help.
Tried with a friend's battery, and have the same result.
Also tried using his phone with my battery and worked perfectly.
Any other ideas?
Trickass said:
Nope, doesnt help.
Tried with a friend's battery, and have the same result.
Also tried using his phone with my battery and worked perfectly.
Any other ideas?
Click to expand...
Click to collapse
Just to ask: You're not (accidentally) holding down the volume key when you press the power key (or reset) to turn on, are you? That puts it into bootloader.
MCbrian said:
Just to ask: You're not (accidentally) holding down the volume key when you press the power key (or reset) to turn on, are you? That puts it into bootloader.
Click to expand...
Click to collapse
No, I'm not doing that
I thought maybe it got stuck though, something like that :s but when I do press it, I hear a pretty clear "click", so I guess it's not broken at all...
Also, I noticed that when I try to reflash a ROM, the "current image" (or whatever it's called) is blank ...
(I mean the thing that sais the version number of the currently installed rom)
Okay, sounds dumb I know, but did you flash a new rom after flashing Task29?
It is used to wipe the OS out completely BUT you then have to re-install a new OS...
Just thought I'd ask.....
Same issues.
Same issues on my touch pro 2.
The only solution i find in order to make it boot is with mtty on a Windows xp pc with no activesync.
Perform a
set 14 0
task 8
then the phone boot on the os but on the next reset stay in bootloader !
ultramag69 said:
Okay, sounds dumb I know, but did you flash a new rom after flashing Task29?
It is used to wipe the OS out completely BUT you then have to re-install a new OS...
Just thought I'd ask.....
Click to expand...
Click to collapse
Lol yeah I know that
Thanks anyway
Frederic.james said:
Same issues on my touch pro 2.
The only solution i find in order to make it boot is with mtty on a Windows xp pc with no activesync.
Perform a
set 14 0
task 8
then the phone boot on the os but on the next reset stay in bootloader !
Click to expand...
Click to collapse
Hm, I'll see if I can find a Windows XP pc somewhere and try ... MTTY doesn't seem to work with Win7 x64
Trickass said:
Lol yeah I know that
Thanks anyway
Hm, I'll see if I can find a Windows XP pc somewhere and try ... MTTY doesn't seem to work with Win7 x64
Click to expand...
Click to collapse
Hummm i have see somwhere a howto for mtty on W7... but i'm a little lazy i have choose to do this on a old windows xp
But this command are just temporary i'm searching for something more stable !
Some news from my Rhodium Stuck in bootloader
I have try to Hardspl it (Olinex 0.85)
The good news is i have manage to do it, the bad news is after that even the
set 14 0
don't manage to make it boot.
After a while searching, (thanks wiki of another phone) i have find those command :
password BsaD5SeoA
set 14 0 # Maybe it's usless now but in fact i don't know
set 1 0
task 8
And now i'm back to my start....
I tried using the MTTY commands, and when I did it the first time, the phone booted and performed its "first run setup" thing.
After rebooting though, it went back to the tricolor screen, and I can't get past it anymore, even with the same MTTY commands ...
Any other ideas ? :/
mtty, a lot of post on the internet...
hi,
I think we are a the same point !
I have find a way to start a boot with the HTC screen but the phone tel me that a txt file is missing on the sd card ???!!!???
with mtty :
boot
yes it's quite simple why i haven't think of that befor i don't know... but that didn't solve my problem at all.
I have send a mail to HTC in order to have a diferent point of view but all they said to me is doing a hard reset (who didn't do anything...)
I will post the avancement of my test but i feel a little stuck.
Note : After searchin on the internet, the set 14 0 tel to the phone to boot on the os after a flash (sometime the phone don't reconize the end of flash)
the set 16 0 (or set 16 1) disable (or enable) the RUUNBH tag on boot loader.
More Infos...
I have find a post on a other forum whos said that a defective battery could result to an unstable beaviour of the phone.
I have let it without battery for a day and, today it has directly boot on the OS.
I have ordered a battery on ebay and waiting for it maybe the solution ?
Frederic.james said:
I have find a post on a other forum whos said that a defective battery could result to an unstable beaviour of the phone.
I have let it without battery for a day and, today it has directly boot on the OS.
I have ordered a battery on ebay and waiting for it maybe the solution ?
Click to expand...
Click to collapse
Oke, I will try to take out the battery tomorrow as well ... Although, I tried using a different battery and it didn't help ...
Right now, I managed to boot using mtty set 14 0 > task 8, which seems to work
(sometimes, I need to do the task 8 twice in a row ...)
So as of now, I managed to flash a stock rom onto the phone, and only have to try and reset hardspl back to stock as well.
Waranty here I come ...
lol mine is out of waranty, and it's the solution i ve find everywhere !
did you try hard reset by holding the call and hang up button together when you power up the phone.
last time I remove a program and tha cause me to boot ot a black screen after teh bootloader. Hard reset fix the issue as it return teh phone to the sotck setting of the rom.
PUTALE said:
did you try hard reset by holding the call and hang up button together when you power up the phone.
last time I remove a program and tha cause me to boot ot a black screen after teh bootloader. Hard reset fix the issue as it return teh phone to the sotck setting of the rom.
Click to expand...
Click to collapse
yes, i've try it (HTC has send me the same advise) and... same issue !
In order to done the hard reset (who didn't execute when the phone is to boot in bootloader) i have do a set 14 0 and reset with power and holding the two call hang and power.
But thanks for the advise !
Frederic.james said:
lol mine is out of waranty, and it's the solution i ve find everywhere !
Click to expand...
Click to collapse
Out of warranty ?
How old is it then ?
Mine is just under 1 year old, so I'm lucky I guess ... and I hope
Trickass said:
Out of warranty ?
How old is it then ?
Mine is just under 1 year old, so I'm lucky I guess ... and I hope
Click to expand...
Click to collapse
Hum it's the phone of a firend who give it to me... and he has buy it on e-bay.... for the waranty sound difficult to retreive a bill and... I will search till i find something to do