Hi all,
This is the first time u can see this in the world,
and i want to post it in my love forum, XDA-Developers
First attached pic is the Schematic of Buffered Wiggler JTAG cable..u can buy it online for example on Ebay or make it yourself...
Second attachment describes BA's JTAG pins...u can see pinout of JTAG on the mainboard...
Unbricking:
1- The maximun lenght of the ribon cable is 40cm .. so 30cm is enough
2- Soldier wires from JTAG header to pinout and connect it to ur pc's parallel port...
3- use a JTAG software (like H-Jtag or JTag) to flash newbootloader to ur device ...
Too late for April Fools day !!!
manufacturers pictures though (10/10)
Unbufferd cable LOL <answers on a post card to . . .
hTC's mid run (BA), assembly line test jig @ 2003/4 AnnoDomine. - <PostMaster, returns an error . . . / TimeTravel ?. . >
Where do you get the plug for the lower connection, what (PCsettings FireWall . . . ) are Via LPT ? (Yes power the unit/or use the "force luke") (pity the middle battery connections are Anonymous !)
Okay, what goes on other side of "30cm(MAX) ribbon cable [2x IC's PROM/[email protected] figment.Co.My.Imagination.TheEither], mounted on VeroBoard (with a number of 100Meg Resisters.Only", R O F L M A O . . .
got me for nearly 30ish seconds - Pity you hav'nt a green [donate here ] Button. . . .
Buy this persons partner (they may need it more) a pint!!
nICE .
DroidDotBot said:
manufacturers pictures though (10/10)
here ] Button. . . .
Buy this persons partner (they may need it more a pint!!)
nICE .
Click to expand...
Click to collapse
Of course it is ! when u have a insane resolution picture of a mainboard u don't need to take a picture again ! or maybe u do things on and on in ur life !! he he !
Discovering JTAG pins are simple ! u can download Intel® PXA26x Processor Family Electrical, Mechanical, and Thermal Specification datasheet ! Load the cpu from mainboard and find the test points with a Multimeter !! not so hard !
after finding pinouts u can show it on ur picture (maybe that's hard for u and u like to do everything on ur own !! R O F L M A O !! he he he he)
U're not going to flash PROM or EPROM ! AFAIK we're going to burn 3Volt Intel®Advanced+BootBlock FlashMemory(C3)Stacked-ChipScale PackageFamily (In other word we're going to flash Intel RD38F1010C0ZTL0's boot block via Intel PXA263 (THE PROCESSOR)'s JTAG interface!)
Another subject u must notice is RESISTANCE measure unit is not MEG ! Meg (MegaBytes) is the measure unit for computer data ! imagine a lamp! it can be on or off ! computer based on this fact ! an eletronic circuit can be on of off ! this means 1 or 0 this call bit ! a bit can be 1 or 0 ! in binary logic ! so they call 8bit, 1byte ! so 1MB= 1024 * 1KB = 1024*1024byte = 1024*1024*8= 8388608bit ! so i told all of this to inform u that measure unit of resistors is Ohm and those resistors in the schematic are 100ohms
of course middle battery connections are anonymous ! they're for battery measurement ! but u can power on ppcs with power supply without using that pins!
U can build a buffered wiggler urself for about 5$ or less ! i built one myself
these are JTAG pinouts ! if u have good idea about programming through jtag tell us, i don't want to miss a party
They would buy u a wife ! so u won't be a chatterbox again
I was reading all of ur posts, U're cool & funny ! God bless u ... Lets have fun outta here !
and that's better for u to ask admin to change ur user ID's font color to Green (R O F L M A O) =))
My apologies borteh - honestly.
As you have pointed out, You actually do know what your on about.
I ( Assumed an April Fools, type post, and finding out I'm wrong, leaves me with no hesitation to say I'm Sorry - I'm Wrong )
I am still sceptical about The process, but that's in my nature.
May your god, go with you. _d.b_
DroidDotBot said:
As you have pointed out, You actually do know what your on about.
I ( Assumed an April Fools, type post, and finding out I'm wrong, leaves me with no hesitation to say I'm Sorry - I'm Wrong )
I am still sceptical about The process, but that's in my nature.
May your god, go with you. _d.b_
Click to expand...
Click to collapse
Gr8 ! add me on ur Y! messenger, so we can work together!
Related
summertime.... I wanna go diving but dont wanna miss my pda underwater. so where can I get a waterresistent bag...
diving .. snorkle
Probably best to have your PDA inserted into your brain.
I have a rusty axe and some hammers, let me know if you want me to help you...
mmuuuhahahahahaha
i know why e want use them underwater ... diving is soom time boring ... if you must wait 10 min for decompressing.
OK ... noway to use a PDA underwater! the pressure is to high. it must crack the display ... keytapping doesnt work ... sometime like this.
yea well if it is possible for photocamara's it should be possible for the pda
Yea
There are generic camera bags for diving, I sugest one of those, and keep under 6 meter deph. Please coment results, if you dare...
"and keep under 6 meter deph"
hard to get it back up then
I have some experience with JTAG.
Segger J-Link with PSAS.
I have "Testdevice"... broken Display... soon I will try to connect.
Testpoints and JTAG dump floating somewhere in Internet.
My Questions:
1.
Someone tried Segger with S8500?
2.
Many more Questions to come.
Best Regards
P.S.:
http://www.gsmupload.com/beta-test-thread-samsung-wave-s8500-repair-here/
Edit 1:
Tried to edit Thread title...
...and not yet attached my S8500 to JTAG
oh yeah !!! sachinsud an indian guy bought a riff box... and he tried...
i thnik that you are in the right way...
btw have you tried to connect the wave with broken display to a external monitor?
the wave have video output!
cheers!
At the moment my damaged S8500 is good enough for training.
Only glass is broken...
I have an 512 MB dump from S8500 via JTAG... NOT my. But interesting for study.
I play as long as I can with Multiloader. With AMSS and maybe soon with Bootloaders... and only if I brick this S8500, I will try my Segger JTAG...
About TV out.
I bought Original Samsung AV cable, because normal AV cable seems to have other Pins connected.
But very impressive to see some Games or Videos from my handset on TV.
Never seen before...
my last handset is from 2006.
Best Regards
Nice. Found today S8530 JTAG dump from ORT JTAG.
Thanx.
http://srimeenakshimobiles.com/foru...t-s8530-wave-ii-unbrick-repair-dead-boot.html
Nice:
http://www.ort-jtag.com/blog/
About S8500:
http://www.ort-jtag.com/blog/?e=10
Best Regards
Hope I could get one of that ORT Plus software for free!
Today I saw this:
http://www.segger2.com/index.php?page=Thread&postID=1786&highlight=s5pc100#post1786
Found 1 JTAG device, Total IRLen = 0:
#0 Id: 0x1BA00477, IRLen: 04, IRPrint: 0x1, CoreSight JTAG-DP (ARM)
Cortex-A8 identified.
Click to expand...
Click to collapse
So maybe my J-Link will work...
I'll try next month... but started today.
With removing Label.
I can see now Testpoints are big enough for my solder skills.
And easy in 2 rows, with enough space between.
Maybe I'll play solderless... but lonoooog time ago my MSM6250 experiences.
Best Regards
Edit 1.
Or for 8 Euro from Poland:
http://www.multi-com.pl/index.php/en_US,details,id_pr,8047,menu_mode,categories.html
Edit 2.
I hope you see difference between pro stuff.
1 of these 3 Pics is not my...
need some info about connect to Samsung Cortex-A8 S5PC110 and dump internal memory.
what software need with my JTAGs:
- TI XDS560PCI;
- SpectrumDigital XDS510USB;
- Blackhawk USB2000;
- Altera USB-Blaster;
- Altera ByteBlaster2 (LPT);
- Wiggler (LPT);
- Luminary Micro Development Board;
- NXP LPCXpresso LPC1114 Development Board.
According to this:
http://www.segger2.com/index.php?page=Thread&postID=1786&highlight=s5pc100#post1786
...we are able to recognized the cpu type as cortex A8, but all the memory content are zero...
Click to expand...
Click to collapse
The proper Software for S8500 is mandatory and much more important as Hardware.
Few of the JTAG Masters are able to make own JTAG Hardware for less then 20 Euro.
But the Software...
If Bootloader alive, then higher chance to have connection with any JTAG Hardware and CPU only... memory is something different...
But if Bootloader is erased, then CPU Bootcycle... and it is nearly impossible to halt CPU without proper Software to have access to memory... RAM or NAND.
Next week I can maybe answer, if I had success with my J-Link... now I must wait for my second S8500 compatible JTAG.
Best Regards
Try OpenOCD, may (but dont have to) work. It should support A8. Btw in s5pc110 manual we can read about some new debugging interface except jtag, anyone ever seen this?
Last time I checked OpenOCD did not have the driver for writing NAND through s5pc110. Is it available now?
Gah, it isn't, i confused something. :/
Btw.
Why do you want to make full internal memory dumps, while these seems to be ones you're looking:
http://forum.gsmhosting.com/vbb/f665/share-full-flashes-1245293/
Compared S8530 FULL_RAW posted there with boot_loader.mbn, first bytes are exactly the same
Of course these could be RAM images, but why would them be called "full flashes"? ;d
@ Rebellos
Very good Link.
S5250 + S8500 + S8530 JTAG Dump.
And meanwhile ... I9000 Dump for study.
Thank you very much.
Best Regards
First attempt.
I have soldered 8 wires...
Anyone found Pictures of soldered wires in S8500...
Please post.
Any hints/tips are welcome. As I have at the moment no idea if I can insert Battery... or I have to hold... maybe I have to insert something to protect wires...
Thanx in advance.
Battery pins are quite big, try to use ac/dc 3-4V converter stabilised by some capacitor and clips on pins.
This is my wires for JTAG. Used standart battery for power.
and pinout for JTAG.
Thanks, how are you powering Wave? does battery fits together with cables or have to wire DC too?
In theory you can use USB cable to power on...
I have only used battery and pressed Button.
Now my S8500 is alive again.
Next attempt is to prepare my XXJB6 Bootloader... I will see if Wave is then dead again or Bootloader is usable...
Best Regards
Seems I'll need 30 minutes for 256 MB reading...
So 512 MB complete 1 hour...
Ehm, I'm tooo dumb to dump OneNAND.
Can someone please help me.
What I need to set/enter/press...
This is what I did... See Screenshot. I can read something from 0x42480000... but this is not what I want.
Please correct settings needed.
Thanx in advance.
Best Regards
It isn't "Memory reading" for sure, not directly at least.
Probably oneNAND reading isn't possible by some clicks and you need driver for oneNAND in script. oneNAND is controlled by modifying special registers under 0xB000_0000 address space. If you want oneNAND dumps you have to find driver for that or do it through FOTA using BL3 function Flash_Read_Data and rebell_memdump from our SVN repo.
Maybe I've found my mistake...
Now I can read something at 0... will see in an hour what it is.
Best Regards
Edit 1.
Okay, I have my 512 MB Dump.
But under DCC Red/Write Tab... and need to set few things... so not only press 1 Button.
Less then 30 minutes for 512 MB Reading...
Now I have to learn how to write safe.
As I don't need Full 512 MB write, only 4 MB at Start...
to prevent erase full 512 MB
hello,
While solving the wifi issue, accidentally wifi pin(spring) from motherboard got broken and now i m not able to do soldering and my wifi is not working.
I need PCB Layout (or motherboard layout or main board layout or circuit diagram) for HTC One X so that i can trace the connection for wifi and directly connect there if possible.
I tried to search on google but cudnt find it. can someone plz provide the layout??
I dont know why its not easily available on internet. do companies hide this kind of info?
bcoz my phone is imported from another country, HTC service center refused to repair it...
plz help me..
thank you.
broken antenna is shown in the pic.
plz tell me if i can solve this issue somehow. i have attached the pic which shows the broken part.
anksh said:
hello,
While solving the wifi issue, accidentally wifi pin(spring) from motherboard got broken and now i m not able to do soldering and my wifi is not working.
I need PCB Layout (or motherboard layout or main board layout or circuit diagram) for HTC One X so that i can trace the connection for wifi and directly connect there if possible.
I tried to search on google but cudnt find it. can someone plz provide the layout??
I dont know why its not easily available on internet. do companies hide this kind of info?
bcoz my phone is imported from another country, HTC service center refused to repair it...
plz help me..
thank you.
Click to expand...
Click to collapse
Your cellphone is a Quadcore..and I took my tester and betwen the 2 pins there are 1.2 omhs so is the same point of the PBC..in the backdoor both pins touch the same plate..maybe you only need is try to separate a little the pin to be sure it touches the plate in the backdoor
I hope this help..sorry bad english
Thanks for replying ...! Finally some1 replied...
Slight confusion here..
Plz tell me what shud I do exactly? Shud I use the other pin instead of that broken pin? Bcoz they r the same..?
HOX
CID: VODAP021 (Aus voda),
HBOOT: 1.36
S-ON
ARHD 19
anksh said:
Thanks for replying ...! Finally some1 replied...
Slight confusion here..
Plz tell me what shud I do exactly? Shud I use the other pin instead of that broken pin? Bcoz they r the same..?
HOX
CID: VODAP021 (Aus voda),
HBOOT: 1.36
S-ON
ARHD 19
Click to expand...
Click to collapse
I think that is the same You should start by cleaning the plate in the backdoor and pull gently the pin .and assambly again.hope it helps
it is the same point, juste solder a wire between the remaining good point and the antena in the housing, be careful not to breack the only one point left.
if you don't want to use soldering any more, juste gently pull the pin to make it touch the antena, remember you have to do it gentely !!!!
its working now..!
amino1 said:
it is the same point, juste solder a wire between the remaining good point and the antena in the housing, be careful not to breack the only one point left.
if you don't want to use soldering any more, juste gently pull the pin to make it touch the antena, remember you have to do it gentely !!!!
Click to expand...
Click to collapse
jabo7 said:
I think that is the same You should start by cleaning the plate in the backdoor and pull gently the pin .and assambly again.hope it helps
Click to expand...
Click to collapse
thanks for helping..! i took the help of an expert for soldering purpose and its done..!! now wifi is working nicely.. :good:
but i feel that its fluctuating many times. means at the same place suddenly there will be more signal strength and suddenly it will decrease also..!! (i think thats not something to worry bcoz it happens at the places which are lil far from router.)
anksh said:
thanks for helping..! i took the help of an expert for soldering purpose and its done..!! now wifi is working nicely.. :good:
but i feel that its fluctuating many times. means at the same place suddenly there will be more signal strength and suddenly it will decrease also..!! (i think thats not something to worry bcoz it happens at the places which are lil far from router.)
Click to expand...
Click to collapse
happy to hear it worked, you did the best solution, asking help of expert in soldering :good:
don't worry about the fluctuating of wifi since you are far from the router, this is normal.
amino1 said:
happy to hear it worked, you did the best solution, asking help of expert in soldering :good:
don't worry about the fluctuating of wifi since you are far from the router, this is normal.
Click to expand...
Click to collapse
Should look like this
First of all, hello to everybody. I wish that I will never log in in to xda forum to ask this kind of question but c'est la vie
Friday my HOX fall down and the touchscreen was broked, it is a problem this one but another huge problem appears the next day when, I tried to use the phone but then I can't saw anything, when my phone falls down it was still 100% functionally even with the touchscreen broked and before to don't show anything it makes me freezes of the image but the phone respond to the commands. Now I have a question, guys do you think it is a problem allso with the chipset that is not showing me anythig or is only the display fault. I ask you because is verry expensive the touchscreen + display to replace it and I don't wanna to have surprises to replace it and then to see is allso a chipset problem. Another thing In the time that I can't see anything I can controll my HOX by remote with my computer using androidscreencast.
Thanks everyone for every post wich will came.
If you still can control your phone and everything is working then my guess its only a screen problem. If you had chipset/mainboard problems i doubt it would have booted up fine.
The only way you can be 100% sure is to replace the screen !
Mr Hofs said:
If you still can control your phone and everything is working then my guess its only a screen problem. If you had chipset/mainboard problems i doubt it would have booted up fine.
The only way you can be 100% sure is to replace the screen !
Click to expand...
Click to collapse
Allso I was thinking the same like you but you know when you spend more then your half salary is better to ask to don't have surprises... danke mister
Its a difficult matter.....you can never tell for sure !
I have huge emotions for tomorrow... my display + touchscreen will came ... finger-cross for my hox
Ow nice ! I hope it will be fine too !!! :thumbup:
Mr Hofs said:
Ow nice ! I hope it will be fine too !!! :thumbup:
Click to expand...
Click to collapse
I'm verry nervous I just put other touch and still nothing displays but the phone is on ... what can I try now mr ?
I'm no hardware expert ! But logically i would say that you must open it up, check all connections and boot it up without the casing on it....faster to check and you don't need to take it out again and again to check more.
Mr Hofs said:
I'm no hardware expert ! But logically i would say that you must open it up, check all connections and boot it up without the casing on it....faster to check and you don't need to take it out again and again to check more.
Click to expand...
Click to collapse
I just followed this tut http://www.youtube.com/watch?v=OIeO0DueMcg at the min 5:40 is exactly what you say.... I try this now after few hours of tring the phone with the case I'm afraid to don't damage this display. the phone is still recgonized by pc and I can see the homescreen via remote
So, I have the verditc, the phone si totaly death someone from a gsm service told me that is not advantageous to fix it... so I gonna quit this forum. It was a verry nice pleasure to meet you guys and I dream to see you in HTC One theard . <3 u guys . I don't have so much money to fix it.
My HOX had the tegra 3 chipset broken today maximum monday I gonna reball it and then,........ Guess who will be back ><
Good for you...
Mr Hofs said:
Good for you...
Click to expand...
Click to collapse
You really don't know how happy I'm .... even the phone is still broke but I know that I will repair it
Hello.
This is thread for these who have seriously problem with their Samsung Wave s8500.
PROBLEM
- Restaring itself after some use.
- Charging problem ( No charger connected, but it say that phone is connected and charging )
- Other weird things happening with Samsung Wave S8500
SOLUTIONS THAT DIDNT FIX PROBLEM
- Software ( Bada 1.0, Bada 1.2, Bada 2.0 )
- Factory Reset
- Master Reset
- Memory Card OUT
- SIM Card OUT
MAYBE SOLUTION
- Android ( i dont have USB to try this )
- Firefox OS by Tigrouzen
- Ubuntu Phone
MY COMMENT
- Lots of guys having these problem with their waves,, i just one day start do happening.. first i thinked that i was software problem, but i changed lots of other softwares ( Bada ) and same. Its working 3-4 minutes, then turn off itself, and waiting 15 sec to turn it on.
Everybody who know someting that we could try, or it can help, post here, so that other members with this problem can SEE
Cheers :laugh:
Galaxy3HELL said:
Hello.
This is thread for these who have seriously problem with their Samsung Wave s8500.
PROBLEM
- Restaring itself after some use.
- Charging problem ( No charger connected, but it say that phone is connected and charging )
- Other weird things happening with Samsung Wave S8500
SOLUTIONS THAT DIDNT FIX PROBLEM
- Software ( Bada 1.0, Bada 1.2, Bada 2.0 )
- Factory Reset
- Master Reset
- Memory Card OUT
- SIM Card OUT
MAYBE SOLUTION
- Android ( i dont have USB to try this )
- Firefox OS by Tigrouzen
- Ubuntu Phone
MY COMMENT
- Lots of guys having these problem with their waves,, i just one day start do happening.. first i thinked that i was software problem, but i changed lots of other softwares ( Bada ) and same. Its working 3-4 minutes, then turn off itself, and waiting 15 sec to turn it on.
Everybody who know someting that we could try, or it can help, post here, so that other members with this problem can SEE
Cheers :laugh:
Click to expand...
Click to collapse
Mine isn't restarting.
problem is auto switch off.
and this problem comes 1 time per 15days ,
and problem remains about 1 hour.
kktkaran said:
Mine isn't restarting.
problem is auto switch off.
and this problem comes 1 time per 15days ,
and problem remains about 1 hour.
Click to expand...
Click to collapse
Yeah, that how my problem start...
It was one restart in one week, then it started all day.
Its same problem.
- Android ( i dont have USB to try this )
Click to expand...
Click to collapse
If you can use Multiloader or Kies for Update, then same cable to flash/copy files for Android.
Or why you can't test Android?
Or how you flash Firmware with Wave?
Best Regards
Edit 1.
- Charging problem ( No charger connected, but it say that phone is connected and charging )
Click to expand...
Click to collapse
I know this also from old Siemens Qualcomm handsets... if USB itself was damaged or parts of Resistors or some other SMD parts damaged or missing complete...
= HARDWARE damage/defect
- Other weird things happening with Samsung Wave S8500
Click to expand...
Click to collapse
Maybe something like Input without pressing something? Or close Application?
My damn S8600 has damaged Touch... autoshut down off Apps... damn End key...
Also Hardware damaged/defect...
S8600 was bought as damaged handset from Ebay...
So maybe you bought also damaged S8500...
Sorry.
Again, I have no idea why you create again new Thread...
GT-S8500 | Wave - Restarting Problem
GT-S8500 Restarting ITSELF EVERY 30MIN
Thread for: S8500 Restarting ITSELF
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2343067
http://forum.xda-developers.com/showthread.php?t=2294795
Best Regards
adfree said:
If you can use Multiloader or Kies for Update, then same cable to flash/copy files for Android.
Or why you can't test Android?
Or how you flash Firmware with Wave?
Best Regards
Edit 1.
I know this also from old Siemens Qualcomm handsets... if USB itself was damaged or parts of Resistors or some other SMD parts damaged or missing complete...
= HARDWARE damage/defect
Maybe something like Input without pressing something? Or close Application?
My damn S8600 has damaged Touch... autoshut down off Apps... damn End key...
Also Hardware damaged/defect...
S8600 was bought as damaged handset from Ebay...
So maybe you bought also damaged S8500...
Sorry.
Again, I have no idea why you create again new Thread...
http://forum.xda-developers.com/showthread.php?t=2343067
http://forum.xda-developers.com/showthread.php?t=2294795
Best Regards
Click to expand...
Click to collapse
i know you will post you answer.
I cant try Android becaouse i dont have USB, i was use friend USB.
I created this thread for other members who have same problems.
Touch screen is working great.
I mean I have damaged devices, because they are damaged.
I've bought them because the are damaged... = cheaper...
HARDWARE DEFECT.
I don't know how to write in your language...
In German:
kaputt
In your Language:
сломљен, неисправан
You need professional help of skilled guys to repair handset, or buy next time handset WITHOUT Hardware damage.
I don't know, if it is an good idea for you, to change self PCB...
Better buy complete handset for 20 $...
Sorry for you, that your Wave is damaged and nearly unusable...
But it is IMPOSSIBLE to fix your problem by Software...
Das kann doch nicht so schwer zu verstehen sein...
Best Regards
adfree said:
I mean I have damaged devices, because they are damaged.
I've bought them because the are damaged... = cheaper...
HARDWARE DEFECT.
I don't know how to write in your language...
In German:
kaputt
In your Language:
сломљен, неисправан
You need professional help of skilled guys to repair handset, or buy next time handset WITHOUT Hardware damage.
I don't know, if it is an good idea for you, to change self PCB...
Better buy complete handset for 20 $...
Sorry for you, that your Wave is damaged and nearly unusable...
But it is IMPOSSIBLE to fix your problem by Software...
Das kann doch nicht so schwer zu verstehen sein...
Best Regards
Click to expand...
Click to collapse
Dead Adfree, we all know that new motherboard is solution.
Im started this thread, because i wanted to help other guys, just post something that could try.
I have nothing to lose, i will opet my phone and remove every thing what you think thats solution.
Give people hope, dont say that.
we all know that new motherboard is solution
Click to expand...
Click to collapse
This is not 100 % correct.
PCB is only 1 part...
It is possible, after PCB change SAME problem...
And PCB change is not easy... sometimes risk to damage more then before...
Connectors etc...
Easy/easier would be to test Android, if same Problem persists...
But you are not willing or USB cable or no idea...
And 3 Threads for 1 problem is hard to understand...
Dead Adfree..
Click to expand...
Click to collapse
Sorry, I am alive.
Best Regards
adfree said:
This is not 100 % correct.
PCB is only 1 part...
It is possible, after PCB change SAME problem...
And PCB change is not easy... sometimes risk to damage more then before...
Connectors etc...
Easy/easier would be to test Android, if same Problem persists...
But you are not willing or USB cable or no idea...
And 3 Threads for 1 problem is hard to understand...
Sorry, I am alive.
Best Regards
Click to expand...
Click to collapse
that should be DEAR ADFREE.
2 thread is opened.
First it was my problem.
Second is for other to help.
Why you cant understand that?
Why you cant understand that?
Click to expand...
Click to collapse
Because important/interesting details are spread over 3 Threads...
Your summary is "incomplete"...
I hope you will not open 4. Thread with same problem or more.
Technical discussion...
Click to expand...
Click to collapse
You can read this in Forum title...
So you have open your Wave and check for VISIBLE damages?
Little inspiration, read this document.
http://forum.xda-developers.com/showpost.php?p=43867955&postcount=28
Disassemble Docs are in same Thread... also Videos available for open Wave...
If you are scared... to open handset. Then ""new"" idea is to try Android...
Maybe Android more stable... because SECOND CPU not used... nearly...
Maybe Qualcomm CPU is damaged or parts of CP....
I don't know...
USB cable you can take from your friend.
USB cable is minimum requirement if you really want solution.
Repair has nothing todo with hope, dream...
Only with skills and money.
Only skills also work :good: :good:
But no skills, no money and no will = NO repair.
It's NO shame to have no money.
Maybe sell your Wave as defect/damaged on Ebay.
And use other handset.
Best Regards
Maybe it's only the damn samsung automatic reboot.
If you keep the power button (on all samsung devices i tested s1,s2, s3, other bada, next) for 10-15 seconds it reboot itself.
I found this while i keep my wave2 in my pocket and i found it at pin screen.
Bye
Thank you all for help, but u sold this phone and buy motorola milestone 2
i think i made good chooise.
bye
hello
i had the same problem (wave restarting himself)
it was a 3g problem (umts) and no problem in 2g (gsm)