Till now i have found just about everything in xda! Even a similar thread for the same problem but no solution at all!
Thing is, my hd takes too long to wake up for an incoming call..resulting in missed calls all the time..Ring starts in about 3,5 tones..!!! It wakes almost instandly (backlight) but it takes a lot of time to draw the picture etc and THEN starts ringing..
[i am on MIRIS V18 wm6.5, using the default WM dialer with the sliders (not htc's one!) and csdev for autolocking after wake up]
I had similar problems in many roms, even 6.1 .. with the fastest one being 1,5 tone then ring.. Its allready too long for me! I have tried some tweaks, i am not using mp3 for ringtone, using instant ring from hdtweak and no ring delay setting etc..still no luck..
What can be done? I know that many users have the same problem, even with stock roms.. Its same for such a device to be able to do everything sooo sweat but not the phone function!!
So any special tricks?? (font, gdi cache etc settings?) i heard that with sktools and advanced configuration tool etc you can do actually much about that!
Feel free to post your experinces as well, hoping that someone can provide us with a solution or a worthy workaround..!!
I've got the same problem, always have to call people back. Mostly takes about 5 seconds before the answerbutton works, while ringtone is already pissing off the other passengers in the bus
I still think the slow buildip is caused by Wisbar Advance, I used the HD Tweak aswell.
Very Good POST yes you are right many peoples have the same problem i have the same problem!
So i try with HD tweak "Ring without delay" i try with Advanced config and etc Again the same really when someone ring me no matter from the ringtone or anything the phone start ringing after few seconds!
I make few test and what i saw is that if the phone is sleeping when someone call you take longer your phone to wake up and ring
then i try again with no sleepy phone, again ring with delay so i can say if the phone sleep he need few seconds to ring like 5 seconds if the phone not sleep he need 3-4 seconds But at all This is serious problem and maybe is time we to fix this!
I don`t see any point this device to be able to do so much things and we always to Upgrade them but the phone function that we use everyday to make us troubles!
I have this problem with the stock room when the phone was brand new, after i flash the phone with Davideuck V 5 have the same and now im with Davideuck v7 and again is the same ! so no matter what kind of room or radio version you use this problem is real... and really the phone ring with DELAY
Will be perfect if anyone can find desigion of this problem and our phones to start ring immediately without any delay !
Thanks
I have been struggling for months with well-known this 2-sec (far more than this !) delay. The HD tweak didn't work for me either. Furthermore, it has been reported that even if this setting is changed, it is self-reset after a soft reset !
The only solution I found is replacing the HD Caller ID with the WM default one. It is very ugly compared to the modern HTC one, but now my phone takes only 1 sec to respond, that is, wake up, show the Caller ID screen and start ringing.
This replacement can be done from the settings of the HD tweak.
Please let me know if this works for you ! I'm running stock ROM.
Yes if we use the default WM dialer the PHONE is very very fast and ring without ANY delay but its very UGLY so maybe the problem is in the dailer!
Like i say no matter what room you use yes its the same for me with the default WM and the phone just think faster than me
Maybe some programers must to chek this out why this heppand maybe the HD dialer is too heavy?
Yes,thats true! But i am using wm dialer, not htc's one!! Still far from fast..(although i am on wm 6.5 where the default wm dialer with the answering sliders looks awesome, its buggy and slow as hell..[because it needs that the phone is locked in order to run so])
So as i asked around in a major greek forum i have found out that 99% of hd users have the same issue! [that 1% doesn't give a s&@t !]
Here too..What can we do about it..?I am starting to think the 1,5 tone delay as acceptable value..[told you i am on 3+ right now!!] Does anybody know if windows 6.5 that lock with external programm [like csdev] on wake up take normaly so long? Ideas...?
it's always not a good idea to fresh new rom too often
coolmicko said:
it's always not a good idea to fresh new rom too often
Click to expand...
Click to collapse
That has nothing to do with the problem man..!
If we could find a way to minimize the load on wakeup!! (so the hd has nothing to load more than the phone function!)is it possible?
Like i told you with the default WM dialer with WM 6.1 the phone ring without delay and is like every normal phone so this mean that the problem is in the dialer..
I think that the HD dialer is too heavy or buggy and this is the reason why take so long to wake up.. the phone!
Maybe some programers must to chek this out what is the diference betwen the default WM dialer and HD dialer we all know what is the diference.. but i mean the diference not how they look like how they are made and all other litle codec files..
So maybe we can find solution to update the HD dialer to be fast as the default WM one..
No matter you are with WM 6.5 and etc.. because till the problem is not solved no matter what room you will use the dialers will be the same made from the same files..
to resolve this we need to know what exactly is the problem to be able to fix it!
Like i say i think that we can find answers in the DIALER but im not programer..
this is very true and this is a very good post gonna supscribe to instant email about it right now ... i think the problem is not only in the dialer i have a stock rom and i had the problem since the very first day but i got a greater delay after installing spb pocket plus while i am not actually using manilla anymore and even a greater delay after installing wisbar advance 3 ... maybe the solution would be in the processor priorities i dont know
So far, i haven't found any solution .
I already made the same post a few months ago :
http://forum.xda-developers.com/showthread.php?p=3902624#post3902624
there's got to be a way guys!!
Some time ago, both sides recording was a total NO(!) for htc devices!! They say it was HARDWARE ISSUE and nothing could be done!(for over a year+) Then .. ICR and..voila! We even got tmc now! !
Is it possible to have the slugiest of all phones?? no way!
I think is a question of time we to find solution for our problem with the phone ringing delay!
Managed to get it to 1,5 rings in the same situation!( as i described before, no rom change etc..i was on 3,5 + rings remember!!)
I installed advanced config tool and played with the phone and performance settings.. performance almost set to max values..(font cache etc..)
Phone settings no delay, end key delay from 3000ms to 0 etc..(there are some settings there, so be sure to know what you are doing or backup first!)
Think i can get it to 1..!which will be extremely fast from what i experienced so far!!
Note: the improvements are for the second+ call after a softreset! The first one is ALWAYS slugish!!
Hi kostasalfa,
Mind posting your Adv Config settings? Thanks.
After long... long search I found maybe a solution:
HKCU\ControlPanel\Sounds\RingTone0
Script value to av0pr
I'm going to test but it seems the true way ^^ (thx to AX3L)
D'rath
Ok .. not a "true" solution but got INSTANT ring! (before the end of the first tone!!)
As i said i was on wm 6.5 using the kinda buggy default lock etc...After my advan.config setting which was an improvement i did the following! Stopped csdev and so the deafult lock! I did go back to S2U2 !! (warning,important: set delay after wake up to 300 or better 400 ms!!) And then i tried resco contact manager!(again!) But there is a new beta free for all of you in their forum!( http://www.resco.net/forums/ShowPost.aspx?PostID=24957 ) Set it to HANDLE INCOMING CALLS! Soft reset.. and voila!! (install s2u2 in device..resco better in sd!)
As i said..not a true solution but i GOT INSTANT RING!!
DONT FORGET TO USE HD TWEAK TO REVERT TO DEFAUL WM DIALER, NOT HTC;S ONE!!!
Try abd tell me if it worked for you!
i use the new energy rom 6.5 standard hav no problems with ring time or receive any late calls or miss calls u guys must check out the roms before loading them
Thanks for suggesting to try Resco Contact Manager. The new beta version seems to have corrected the incoming call delay. So far, my HD responded just before the first ring ends. Still testing.
tatou said:
Thanks for suggesting to try Resco Contact Manager. The new beta version seems to have corrected the incoming call delay. So far, my HD responded just before the first ring ends. Still testing.
Click to expand...
Click to collapse
Good news! Resco did it i think..
(i may try the energy rom as wingtytn suggested but i dont think its a roms issue..Ps:wingtytn try to call yourself from another phone to see WHEN it starts ringing..if you got no issues i would lke to know!you use wm stadar dialer?etc!)
Related
hy all. after using this rom for a month now i ran into several probs.
1) when i lock my tytn, and someone calls me, i cant answer the call, then i cant unlock the phone because the unlock in the lower left corner is replaced by the lost call notification. the first half of the month i have this problem not very often, but now i have it on every call. so i loose every call, the SR, then unlock, then call back. (really cool this problem)
2) bluetooth worked fine, but now i cant enable it without doing a SR before enabling it.
3) omg, it is so slow after a month of use! i SR nearly every day, i delete temps with cleartemp, but its so slow now. for example, when i write a new message, and then switch to landscape, i think i have to wait about 20-30 secs, before its rendered. and the same after sending sms and switching back to portrait home screen.
4) sometimes it looks like everything is ok, but when i try to tab something a realise, that my tytn is completly dead. (i have bought a second mobile phone and use it, when the tytn is dead. and what i want to say o this bug: nice piece of software ms! i feel like an alpha tester for ms! but i had to pay for it. )
all these bugs appeared after a few weeks!
installed software:
pocketrar (newest)
htc task manager 1.51
htc music plugin 1.0
adobe reader 2
cleartemp (newest)
emil andersson pocket sudoku
i hope some ms devs read this thread, think about it and learn something for the future.
regards chief
Why not giving one of mine a try (look in my signature)??
Most that use them are excited of the speed
Olioaglio
Chiefcooker said:
... i hope some ms devs read this thread, think about it and learn something for the future.
regards chief
Click to expand...
Click to collapse
I am running the same T-Mobile Germany ROM and have no such issues! It looks to me like your device is running out of memory! How much memory is still available on your device? Where did you install your apps - phone or card?
Try to run your device without the TASK MANAGER for a while, maybe that is what is eating your memory ...
Junner2003 said:
I am running the same T-Mobile Germany ROM and have no such issues! It looks to me like your device is running out of memory! How much memory is still available on your device? Where did you install your apps - phone or card?
Try to run your device without the TASK MANAGER for a while, maybe that is what is eating your memory ...
Click to expand...
Click to collapse
hi, i have installed the apps in unlocked extrom.
and i dont have the tmobile version, i have the original htc german version.
Olioaglio said:
Why not giving one of mine a try (look in my signature)??
Most that use them are excited of the speed
Olioaglio
Click to expand...
Click to collapse
i have used schaps 3.54 ger rom a long time, and i had many probs with bluetooth too with this rom, and your rom is based on it, but i think i'll try the superstoragerom. looks really good. gut gemacht! der inhalt von pro home sieht ja cool aus.
mfg chief
I'm loving NFSFAN's new Bell ROM, but i'm not crazy about the slide to answer on the phone canvas.
I'm looking for a way to replace the slide to answer / ignore with buttons instead of a slider while keeping everything else the same.
I've researched different skins for this dialer (there are some cool looking ones out there!!) but none of these change the slider.
Any help would be appreciated.
This one works for me; http://forum.xda-developers.com/showthread.php?t=429179. There is also a black version somewhere Google 'Black Minimal Dialer'
I've now been using NFSFAN's ROM for a few days now.
Must say i've gotten quite used to the dialer. I like all of the other features. Especially the "in call curtain". While i'm still not in love with slide to answer I understand the concept of why it was created. If I want to press a button that's what the hardware key is for!!
I wasn't really looking for a new dialer, but i've learnt the slide is an integral part of the package.
Thanks for the response anyways. You were the only one to do so. (everyone else was probably busy shaking their heads!!!)
now mine might sound like a really stupid question, but can I install the opal's slide to answer dialer on my sprint htc vogue ? are all the ## codes working for you on your phone ?
Yes, everything works (911 etc)
In NFSFAN's words, the data connection is not active during a call, it just breaks the data errors.
The dialer is included in his ROM, i'm not really sure if the same one is found anywhere in CAB format. A quick google search for "opal slide to answer CDMA" should yield some results for you.
http://forum.xda-developers.com/showthread.php?t=466519
http://forum.ppcgeeks.com/showthread.php?t=44017
http://forum.ppcgeeks.com/showthread.php?t=53599
and many others!!
Happy hunting,
Jason
thanks jmitr for your patient answer and the links to the solutions.. really really appreciate your patience and yes I just installed it and working fine now.. love the new dialer...
i spoke too sooon... i installed the complete cab by mbarvian and then tried juggaloo's cab but it was for VGA graphics, i tried mbarvian and conflippers cab but that messed up everything...
just mbarvians cab - didn't display the incall screen properly.... it was all greyed out...
now i can't find a single good cab which displays everything like it should... i don't want to do any more trial and error and find out... please help me on this ...
i dont mind not having the canvas - atleast i get a bigger picture on caller screen and thats all i want right now...
I know s2u2 has a large picture to answer the phone with.
I don't use it anymore, I found it drained my battery too fast. With NFSFAN's rom and the opal dialer it isn't really needed anyways.
Sorry none of the links led to anything fruitful, my only experience with this dialer is in the custom ROM. Must say it has grown on me though!!
myshinynewtouch said:
i spoke too sooon... i installed the complete cab by mbarvian and then tried juggaloo's cab but it was for VGA graphics, i tried mbarvian and conflippers cab but that messed up everything...
just mbarvians cab - didn't display the incall screen properly.... it was all greyed out...
now i can't find a single good cab which displays everything like it should... i don't want to do any more trial and error and find out... please help me on this ...
i dont mind not having the canvas - atleast i get a bigger picture on caller screen and thats all i want right now...
Click to expand...
Click to collapse
I've been using this on my Sprint Touch for months now with out any issues. Here's a link for a post I have up at PPCGeeks for you to check out . Please let me know if you have any problems. If you don't want the lock feature, don't install Albert's cab...
myshinynewtouch said:
i spoke too sooon... i installed the complete cab by mbarvian and then tried juggaloo's cab but it was for VGA graphics, i tried mbarvian and conflippers cab but that messed up everything...
just mbarvians cab - didn't display the incall screen properly.... it was all greyed out...
now i can't find a single good cab which displays everything like it should... i don't want to do any more trial and error and find out... please help me on this ...
i dont mind not having the canvas - atleast i get a bigger picture on caller screen and thats all i want right now...
Click to expand...
Click to collapse
I had trouble getting the dialer to work initially also. It seemed to be tied to the rom build that something changed after the 20XXX rom build was released. If I used anything earlier it wouldn't work. If your on a stock rom that may be part of the issue. Not sure, but just my experience in fixing the issue.
It is tied to a shell component.
NFSFAN said:
It is tied to a shell component.
Click to expand...
Click to collapse
Hey thanks for the reply NFSFAN, the slide to answer was the only part of your ROM that I didn't really like......at first. I couldn't imagine going back to the old dialer now.
It is good to learn what's possible and what's not though, thanks again for the answer.
Cheers,
Jason
jmitr said:
Yes, everything works (911 etc)
In NFSFAN's words, the data connection is not active during a call, it just breaks the data errors.
The dialer is included in his ROM, i'm not really sure if the same one is found anywhere in CAB format. A quick google search for "opal slide to answer CDMA" should yield some results for you.
http://forum.xda-developers.com/showthread.php?t=466519
http://forum.ppcgeeks.com/showthread.php?t=44017
http://forum.ppcgeeks.com/showthread.php?t=53599
and many others!!
Happy hunting,
Jason
Click to expand...
Click to collapse
Codes don't work for me on the verizon beta rom. Is it just me or do you have to use the folder rather than the dialer?
hello frnd. i have faced a few problems cooking wm6.5 roms recently. which if you find a solution then share with me asap. am not releasing newer version of my roms cause am busy with my exams and not able to get enough time to fix these bugs.
1st of all am using da_g's kitchen for wm6.5:
here are the problems i am having..
1st. i use youtube that does not require touch flo 3d. you only provided me with the oem. i open application. it loads the videos section. but when i click on any video to view it, i get an error " cannot play this video" i have tried to cook flashlite3 as well as the oone in da_g's kitchens but with no help.
2nd where can i get oem or cab for htc gesture 2. tried searching.
3rd Da_g's recording modification with wm dialer is great. but is it possible to add it to htc dialer?? although have sent him this ques but still if other could fine a soln.
4th how to change link to chome photos directry
5th i dont want date and time setting to start on clicking clock at chome. i dont want anything to happen when i click on clock in titanium.
6th the volume managers do install and work fine normally. but during call, i do not get the call volume display to change call volume. instead i get the usual system and ring volume control display and am unable to change call volume. i have tried both standard and topaz volume manager. could be a build issue but not able to fins a soln yet.
am using notification menu with buttons. could this be causing the issue.?
if you are able to find any possible solutions then feel free to let me know.
Some of you guys might share one issue that I have with my blackstone device:
when waking up the phone, the unlock-slider remains unresponsive for two or so seconds. Thanks to edwardandtubs this has been resolved now. There's a simple registry value that needs to be changed in order to make the unlock-slider response immediately after waking up the device.
That key is:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]"FirstCalibration"
Change the value from "1" to "0", softreset and you're done. Or download the cab I made, install it and softreset your device. It will change the registry entry for you.
According to edwardandtubs it's best to softreset the device by using the stylus and the softreset button on the back of the blackstone rather than softresetting it via software..
Can confirm this works with EnergyROM 23569 Sense 2.5 May 16th Co0kie's Home Tab
Thanks dkp1977
hi,
i have hd with 6.1 stock rom ...
i have battle ,when i make a phone call ,to unlock it.
the lock icon , remained unresponsive and i had to keep on pressing..icon.. two or three times to get response...!
( problem is ...my phone is set by me, to turn off screen ..also i have a tweak ..to lock screen on top of that )
with this reg . tweak ,i hardly touch icon and it unlocks ..!!!!!
no delay ...
working really smooth ,
thank you for sharing
willcor
Amazing stuff, this has been a niggly bug for ages. Many thanks
further to my above post,
i have also notice .......
when i " wake " phone from sleep and unlock it ..
there is... no lag on the homescreen and homescreen response, is immediately and very smooth .......!!!
this reg. tweak should also be in the
xda wiki - hd
" tweaks ,tricks and tips for your blackstone...!!" section.
thank you ..again
willcor
The guys who came up with that reg tweak deserve your props, mates. I just made an installable cab.
Just need a slider tweak that works nice and fast for htc sense on the blackstone, that can lag big time at times
This is what I've been looking for. Awesome. I'm gonna test it right now.
Must admit, I thought I thought it was just my HD being bloody slow off the mark.
But just installed, and that's sooo much better
Much thanks for this little one
cab is not working for me, using Energy.BLACKSTONE.23569.Sense2.5.Cookie.Jun.06.Release2. Tried again after hard reset, same result.
but the manual way, i.e. changing the reg in regeditor works. anyway, thank you! credits to you for sharing and to the one who performed the magic
Which phone canvas do you use for WM6.5.5?
I have found only those working solution:
Huashan_Phone_Canvas_Enhancement_5_0_61220152721_0
but this canvas has a dialler id issue (no visibility of Caller for incoming call)
or
pyrorob_Phone_Canvas_Enhancement_2G_4_2_62120113_VGA_FOR_6.5.x
wrong position according to soft bar and no support for video call.
Actually the most important file from those canvas is phcanhtc.dll. If I replace this file from one to one I change also issue of those two canvas...
is there anyone who solved this problem? Or do you have any other advice for phone canvas supporting video call with right position?
does this help you?
http://forum.xda-developers.com/showthread.php?t=695166
don't know if video calling works, but as phone canvases go i think Iconsoft Phone Extension is probably the best (isn't free though). it's fast, looks good, doesn't eat up memory an procesor like htc canvas....
15$ is a bit pricey, but works as advertised.
sheennick123456: even this canvas has same problem with position like pyrorob_Phone_Canvas, but it is supporting video call, so for the moment, winner...
rape_artist: not bad, but I prefer original HTC canvas...
I cannot believe, that no one solve this problem...
can you post a screenshot explaining the exact problem???
i know there is a perfect VGA dialer for WM 6.5.5
It is the same problem like in this tread:
http://forum.xda-developers.com/showpost.php?p=6575782&postcount=15
Unfortunately Veisen_qilin_Phone_Canvas_Enhancement_4_3_61120121529_0_VGA do support video call but video call is not working...
pls post the link for the dialler, I will try it...
look at this thread
http://forum.xda-developers.com/showthread.php?t=666409
check post #4
Does not work... I tried this allready
if i recall correctly status rom 3.0a has fully functional phone canvas on 6.5.5. maybe a place to start looking.
THX for the tip, I will try it. It is Tachi canvas, so I suppose that it is this one:
Tachi_Phone_Canvas_Knoop_v2d
I tried it before, it was not correct too, so maybe Status make some fix. Only I am afraid of response. Tachi is for diamond with 6.5.x quit slow...
I let know, how it works...
Edit:
Status wrote:
[What's new?]
1. ...
2. ...
3. ...
4. New PhoneCanvas now works with Windows Phones 6.5.5. This is so hard. Thanks god.