Develop Bugs

XDA IIi - Please help me !!

Hello Guys
Firstly, Ive been thru this forum and wiki and have tried various things without major success............Im now getting pretty fed-up.
Ive got an O2 XDA IIi, which Ive unlocked ready for my Orange Contract SIM.
My SIM works for phone and text, but keeps getting "no modem" errors if I try to connect GPRS.
Ive downloaded Resco and can see the Extended Rom folder.
Ive downloaded 3 or 4 different Ext Rom Unlockers - without success (Ive deleted each in turn, installed the next version and soft-reset as I went).
I actually have all of the Orange CAB files, which seem to load onto the PDA if i put them in My Docs and click each in turn - BUT, I still cant connect and all reverts back to O2 if I hard-reset.
So, now I have done a hard-reset and soft reset prior to O2 stuff being auto-installed from Ext Rom (?).
Im getting pretty frustrated at not being able to access the write-protected Ext Rom in order to swap the O2 stuff for my Orange settings.
PLEASE - can anyone give me some step-by-step instructions on what I can do ?
AND - let me know if Im looking in the totally wrong place to start with.
Thanks
Paul
My XDA IIi details are :-
Model No PH10C
Windows Mobile 2003 2nd Edtn
Processor Intel PXA272
Speed 520MHz
Flash Size 64MB
Memory 122.04MB
ROM Version 1.10.00 WWE
ROM Date 12/24/04
Radio Version 1.00.00
Protocol Version 1337.39
ExtROM Version - Not Showing as soft-reset during software load

http://wiki.xda-developers.com/index.php?pagename=HimalayaRomkitchen
the last part
unhide your rom and unlock you rom
copy the cab files to the extented rom dir
edit the txt file to include the new added cab files
and remove the entry for the ones you are removing
hide and lock your rom
and hardreset

Thanks Rudegar
Unfortunately, Ive already tried the unlocker tool (and several different versions of them).
Ive just tried again with the one mentioned (it tells me that the software was written for an older version of windows software), and when i select Unhide, the image turns grey but nothing happens.
When I select unlock, i get an error message and "FL_IOCTL_BDTL_HW_PROTECTION"
When I click OK, i get "- A device attached to the system is not functioning."
Clicking OK again, gives me "extrom unlocked" - but it ISNT unlocked.
Any ideas ?
Thanks
Paul

Also,
As I can see the Ext Rom folder, I tried to edit the config.txt file (just to see if it could be edited).
I got a message "No Storage memory available. Tap Cancel, use File Explorer to delete some files and try again. Or, move the note to an alternative storage location. Tap discard to close the document without sving changes"
If I then try to move or delete the config.txt (or any other) file, I get "The media is write protected"
I then installed the Repart_DOC_with_Default tool to make the Ext Rom file larger.
Unfortunately, I get an error "FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed" message and I cannot increase the folder size.
Anyone have any ideas please ?
Thanks
Paul

no if i were you i would try asking or looking in the apline forum because the IIi is alpine and there may be more people there who knows any special things you need to do to unlock alpine devices

Thanks Rudegar
Ive placed a link to this thread in the Alpine section, but as there are so few posts there Im not too hopeful.
Does anyone have any ideas on this please ?
I dont mind paying (or donating) a fair amount in order to get this sorted.
Cheers
Paul

For the mobile that can not unlock by the Extended ROM Unlocker, You have to use the method that DrChair posted here.
You have to find the start point of the ExtROM image which is in Fat16 format, by using Hex Editor and Find "eb fe 90 4d 53 57 49 4e 34 2e 31" (Hex). Copy from this location till 23.2 MB of file size. Open it as virtual disk, then you can do modification.

OMG - I thought things were complicated already.
Surely there must be an easier way to edit Extended Rom on XDA IIi ?
All of the other models appear to have fairly straightforward methods to edit - all except for the XDA IIi
Im afraid all of the link you gave has gone way above my head - it is far too complicated for me.
............
1. First dump your rom to a SD-card, using the well know method.
Which method ? - its not well known to me as i havent found it yet ?
2. Next get the rom to your pc, using ntrw
ntrw ?
3. Using a Hex-editor, copy 2BC019C (HEX) till 3EC019C (HEX) to a file.
ok, i think i will be able to do this.
4. Mount that file as a virtual Harddisk (I use the virtualdisk-plugin for total commander)
??
5. Modify your ExtROM on that Virtualdisk.
ok, i think i know what this means.
6. Umount the Virtualdisk.
??
7. paste the contents of the (modified) file back into the rom-file, at precicly the same position and save it under a different name.
can i do this if the files are write protected ?
8. put the modified rom back onto your SD-card, using ntrw.
? as per 2.
9. Flash your Magician, with the new rom.
Flash ? - and I dont have a Magician, I have an Alpine.
Anyone able to clarify all of this please ??
Paul

Since you are not that technical, I suggest you to forget about it. Or else you may destroy your IIi.
Be understand that architecture of IIi II and Mini are all different. Extended ROM of II is located at DOC (disk on Chip) ROM. But Mini and IIi are not. Mini Extended ROM is located at normal flash memory and not locked READ HERE. I think IIi is the same as Mini. So, wait for some good programmer or hacker to do it. Which may be forever.
You can get some flavour by reading Here. Eventhough you could not read the language, but all the pictures will tell you something.

but it should not be requred to add the stuff to the extented rom to get it to access gprs and mms it's just about putting in the settings
and making sure the right settings are used if there are still
the old settings there

Thanks Guys
I have copied several .cab files onto the PDA for Orange UK Contract settings.
My concerns are that I know the Extended Rom is full of references to O2 and will revert to O2 should I need to hard reset (unless I always keep Orange settings on my MMC).
BUT, Im not convinced that simply clicking onto the Orange .cab files has given me the correct set-up to access GPRS etc - as I cannot access at all.
I keep thinking that somewhere in the darkest depths of the system those original O2 settings are still controlling my PDA.
If someone can confirm for me that by installing and running all of the orange .cab files will indeed set-up the PDA for full Orange access (with no O2 settings running from within the Ext Rom), then I can cope with having to store a copy on my MMC.
Thank very much guys
Paul

if you search the networking forum with the text
GRPS AND <insert your cellphone company>
you are sure to find the right settings plus how to manualy set it up
and when you then sync with activesync you can set it to backup
your settings so if you hardreset you can just restore your backup
and get your settings the way they were

Orange GPRS Settings on 02 xda i
The settings are:-
In New Connections:
SELECT A MODEM = Cellular Line (GPRS)
ACCESS POINT NAME = orangeinternet
USER NAME = Blank
PASSWORD = Blank
DOMAIN = Blank
IN ADVANCED SETTINGS TCP/IP TAB
TICK User server assigned IP address
TICK Use Server Assigned Addresses - SERVERS TAB
You then tap on the G Symbol at the top of the screen and then tap on
Connect GPRS
Two seconds later you are connected.

Thanks Silverhill,
Unfortunately, those setings are already in the PDA and dont connect.
I get a "modem not found" error message.
I can connect with WAP dial-up, but not GPRS.
.....
I have now ordered both O2 AND Orange pre-pay SIM Cards (as they cost less than £10 for the two).
If I do a hard-reset and the O2 SIM doesnt work, I will know the PDA is faulty.
If it works, I can then load the Orange .cab files (after doing a soft-reset during the hard-reset so as not to pre-load O2 from the Ext Rom).
I will then try the Orange Pre-Pay SIM to see if that works.
If it doesnt, it would suggest that the O2 files on the Ext Rom are indeed controlling the settings - even though I stopped them from loading on the reset.
Other than that, I am totally stuffed.
It may be that I have to do a number port of my valuable mobile number and go onto the O2 network.
Cheers
Paul

OK
I received my new Orange PAYG Sim Card, registered it and it worked first time. (I did the same with the new O2 Sim and that worked too.)
Instant GPRS connection - wonderful.
SO, we know that the settings I have on my XDA IIi are correct for Orange and that there isn't any hardware conflict and also that my PDA is not faulty.
A quick phone call to Orange Tech Support AND THEY ASK YOU TO ENTER ALL OF THE SETTINGS AND TELL YOU THE PDA MAY NOT BE COMPATABLE WITH ORANGE !!!!
They really are useless !
I explain (argue) that the PDA must be compatable as the new Orange Sim works fine.
Im told that the only way to check is to go to an Orange Shop and ask them to test my Sim Card in one of their GPRS phones - "which will prove the Sim Card is perfectly OK and the problem is with the PDA" (their words).
I travel 25 miles to a shop and the Sim Card DOES NOT work in their phone.
The assistant offers to call Orange Tech for me to confirm the situation. After being kept on hold for 35 minutes, Orange inform her that my Sim is an older (brown in colour) card and it isnt possible to programme it for newer technologies.
The assistant asks for a new replacement for me and is told that because my PDA is not an Orange supported phone, there is no way for them to run a diagnostic check on it and therefore no way to be 100% sure the Sim is the problem - despite the Orange Sales Assistant confirming it does not work on their GPRS phone.
I am then informed that I can BUY a new Sim Card (blue in colour) for £20 that will work.
At this point I have spent a week trying various settings at home and have stood in the Orange shop for over an hour, so I agree to buy the new card.
Hopefully, it will arrive today or tomorrow and all will be well.
My only "worry" is that I still have all of the O2 settings on my extended rom - so I will keep looking on the forums over the next few months to see if anyone has any better solutions to those currently available.
Thanks everyone for you feedback and assistance.
Paul

buy?
odd when i had my old xda1 stolen i just called my cellphone company
and said it was stolen and they sendt me a new sim card
no charge
same thing had i lost it

Hi Rudegar
Yes - BUY
Ive been an Orange Contract customer for around 9 years (OK, so my monthly bill is only around £3).
They are happy to change my account to Orange World (GPRS enabled) and charge me an extra £4 a month min.
They are told by their own staff that my Sim is actually faulty - the Sim they originally supplied.
They are shown that the XDA IIi is not at fault.
And then they insist on charging me to be able to access the things they are charging me to access.
Like I said, Orange really are a joke.
I have actually placed my mobile phone number (it is pretty special) for sale on ebay http://cgi.ebay.co.uk/Rarely-Availa...429158530QQcategoryZ29781QQrdZ1QQcmdZViewItem
When it sells, I will be moving network and will just go to pre-pay with any bog std number as my call charges and usage are so small.
Thanks
Paul
PS, I hope I wont get told off for plugging my ebay sale.

cant you transfer your nr to your new sim with another company ?
here you can but they take a month to do it guess as a punishment because the thing only takes them 1 sec

SCREAM !!!!!!!
OK, thats out of my system now.
Ive just had the new Orange Sim Card for my contract with them.
Ive tried to register it with them and they REFUSE to pair the new Sim with my XDAIIi
They inform me that because it is a non-Orange phone the insurance would be invalidated - I explained that I do NOT have any insurance to worry about invalidating.
I asked why they were happy to pair a new PAYG Sim Card with the phone a couple of days ago but not my Contract Sim Card.
Their reply was that "by pairing the PAYG Sim and the non-Orange handset, we get new business, but by pairing your contract with a non-Orange phone, we are losing money because you've performed a back-door upgrade".
CAN YOU BELIEVE THESE PEOPLE.
I havent a clue what to do next, as Im getting pretty fed-up of dealing with them.
Paul

lol brand now world where the customer is never right and a bit of a bother
and should count himself lucky that they want to talk to him at all
is at hand
take would take my business elsewhere and never look back
here orange just became more and more unpopular untill they sold their
department to telia and left the country

Upgrade to WM6 fails ERROR [260]: CONNECTION

Hi everybody,
I'm stuck trying to upgrade my TyTn to WWE WM6 (HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108.exe).
After following all the steps of the upgrade wizard, the screen of the Tytn goes black and subsequently the ActiveSync connection is lost. After a while i then get the dreaded "ERROR [260]: CONNECTION".
I am running the original ROM (ROM 1.18.255.3) , and active sync 4.5 on Windows XP SP2. I downloaded the WM6 upgrade directly from HTC website after properly registering my device.
I even tried upgrading to SPL version is 2.10.olipro, but i still get the same behaviour.
[EDIT] Another thing i noticed is that when launching the upgrade executable, when it "veryfies informationj on my computer", if the TyTn is already connection via ActiveSync, it automatically resets into bootloader (4 colors window) and i am forced to perform a soft reset before re-trying the upgrade.
Could anybody help me out here?
Thx!

few people have seen this - no solution as yet.

Best workaround is to use the SD Card update method. No USB connection required.

todd_jg, could you please point me out to a procedure for upgrading to WM6 via SD card?
Thank you in advance.

dondobert
There is a description in the WIKI, just go HERE for instructions on how to flash from SD card.
Best wishes

I'm having the same exact problem....
I'll try the SD card method I guess. I'm suspecting it has something to do with how activesync recognizes my phone, because when I just sync normally it doesn't do it as well as previous phones, for example when I plug in the phone it wont auto recognize, I hafta manually start active sync on my computer before it starts.

this is because the usb port in the device is crap...it gets worn and then the cable gets lose....im having the same problem ,it is a nitemare...new usb cable sometime fixes the problem.i have tried 7 new cables the same happens. it gets so bad tha you will be unabled to charge the device,im afraid we got to send the device to htc for repair.

Still nothing...
Just tried for a few hours to perform the upgrade via SD card... but no way!
After reading various threads on the forum i think i tried every tweak and twist in order to have the upgrade via SD card method work (made sure the SD card is formatted as FAT32, not corrupted and with only the HERMING.nbh on it; tried also with SSPL-HERM.exe; etc.) but still no success at all.
Like other users i read of, after entering bootloader, my TyTn just sits there and the only way to proceed is to perform a soft reset.
Any idea?
Has anybody who has the USB upgrade problem been able to succesfully upgrade with the SD card method, or does there seem to be some kind of connection between the two failures?
Thx

@dondobert -
i assumed, you have already tried to uninstall and re-install ActiveSych 4.5 and recreate the synch profile.
OR
try this -
#1. on your phone device goto start-settings-connections-USB to PC
and set the tick mark to Enable advanced network.
#2. synch your device via ActiveSync
#3. do your upgrade OS or Radio
#4. once you are completed the install, undo #1.
Note 1: only do the above steps if you are having continously encountered the lost connectivity to ActiveSynch during the OS or Radio upgrade.
Note 2: your device must has either HardSPL Olipro method or SuperCID

The best way I have found to work around error 260 is
First disable Antivirus software
Next Go into Windows Firewall then exception tab, and search for "Windows Mobile-based Device Connectivity". Check it as an exception.
For the people who use Microsoft Live OneCare,
Go to "Change OneCare Settings" then go to the "Firewall" tab then click the "Firewall Connection Tool" . Make sure the Active Sync/Windows Mobile Device Center is checked on
Good luck
Let me know if this works

dondobert said:
Just tried for a few hours to perform the upgrade via SD card... but no way!
After reading various threads on the forum i think i tried every tweak and twist in order to have the upgrade via SD card method work (made sure the SD card is formatted as FAT32, not corrupted and with only the HERMING.nbh on it; tried also with SSPL-HERM.exe; etc.) but still no success at all.
Like other users i read of, after entering bootloader, my TyTn just sits there and the only way to proceed is to perform a soft reset.
Any idea?
Has anybody who has the USB upgrade problem been able to succesfully upgrade with the SD card method, or does there seem to be some kind of connection between the two failures?
Thx
Click to expand...
Click to collapse
I had this problem, and managed to upgrade with my SD card just fine. In fact, my upgrade died and the device was stuck on bootloader mode.
The SD upgrade method is so reliable I may just do it now for every upgrade.

@dondobert -
on your reply post #8, you have mispelled on the HERMING.nbh file name. it should be HERMIMG.nbh
please verify the file name on your SD card, and rerun the SD procedure.

I had the same 260-error. Fixed:
- Did a "Clear Storage" (factory settings)
- Did all the "settings up your new device"-stuff.
- Did new active sync to computer (vista)
- Flashed just fine from original exe. (And i do have olipro SPL)

I have problem and resolved
Hi I have a same problem but, i just try to upgrade with mobile in boot mode and appears the error, but when connect normally mobile to pc and start upgrade error dissapear, and upgrade full, schap's spanish and radio 1.50 try this method cheers

Had the same problem and got it working
You need to set you TyTn in bootloader (4 color screen) mode and then connect it to the computer. then start loading the WM6 and you should be fine. I had done it using Schaps wm6 and it worked fine...
good luck.

Hi there ...
I had the same Prob with error 260 ...
- After i disabled the "USB-TO-PC" extendet function
- Reboot the PC
- Soft Reset my Vario II
ist works, but i don't know why
I hope it will work on yout decive to ... CU No.Trace !!!

Successful!!!
Thank you all for the great support!
For all of those out there still struggling with the problem, for me it finally worked following hellomotto's suggestion.
Regarding otoro_315 remark: yes, my mispelling int he post, file name on SD card was indeed HERMIMG.nbh.
Thank you all again!
Cheers

Had exactly the same problem. Resorted to SD upgrade - went very smoothly (Official Cingular WM6). However, will keep these suggestions in mind for the future.
I think the SD upgrade probably also eliminates some possible points of failure. According to wiki instructions, SD must be erased except for the img file - takes a bit to transfer 2G to/from SD. Don't know if this is a must - but didn't want to take a chance. Might just buy a cheapie SD just for upgrades.

One more for the SD card method. Extremely quick too ...I was really amazed that a 45MB ROM would flash in less than 5 minutes.
And it worked fine for me WITHOUT even formatting the SD Card first, I just pasted the extracted .nbh file to the root folder and loaded the SSPL file.

You mean the SD card was not erased and there were other files on it? (You don't say that explicitly).
I too was amazed at the speed - the wiki said it takes about 30 minutes - when it indicated complete in less than 10 min, I let it alone for about 15 min. because I thought it was going to do something else!
consul said:
One more for the SD card method. Extremely quick too ...I was really amazed that a 45MB ROM would flash in less than 5 minutes.
And it worked fine for me WITHOUT even formatting the SD Card first, I just pasted the extracted .nbh file to the root folder and loaded the SSPL file.
Click to expand...
Click to collapse

O2 XDA Orbit and Copilot Live 7

Hi All,
I just purchased an o2 XDA Orbit with the free Copilot software. I installed it from the mini sd card and all seemed ok. I entered the product key and activation code which all went well.
Then I proceeded to setup the options but under 'Set Language' there is not language to choose and no voice either. I tap 'Next' anyway and choose Mile as my 'Map Units', tap next and I cannot get pasted the warning screen that mentions 'exercising caution whilst using the product'. I have re-installed and searched the Internet all day and cannot find anything. I'm bored and tired.
Does any have a solution or experienced this problem? I guesing it's something to the with paths pointing to the wrong location but I'm not sure.
Regards,
Aston

Never used my free CPL software just got Tomtom straight away.
Try reinstalling it maybe ? there are 3 CDs with it so do you have to add the voices via a cable PC connection ?

the screen exerciseing caution is a us requirement so is put in all versions you should be able to tap an ok or next button an then you should be able us the application

Hello,
I have recently installed CPL7 with no problems having uninstalled CPL6, this ran with no problems aswell. I have a 2GB Micro SD card, so I copied all the folders/files from the install card directly to the 2GB card, then once inserted into the phone, the phone found the install and installed CPL7. All the folders/files from the install card remain on the card now. Did you install from the card then remove the card(don't know if this is important or not)?
HTH

SDHC not working for 8525. Please help!

I downloaded and installed the AT&T official build from this thread:
http://forum.xda-developers.com/showthread.php?t=317952
It says it has 4 GB SDHC support, but my phone still says there is no storage card installed.
Anyone have any tips please?

Have you tried a soft reset?

Yes, I have. Still says it's not installed.

Well, in the specs it does say that it has "4gb SDHC support."
If you can find it in File Explorer, check to see that it's not the card by putting it in a card reader and having the computer detect it.

hey
i just got a samsung i780 and i forgot my password and its locked and i got it wrong like 3 times and it locked a different way . this is what it says-- several incorrecct passwords have been entered. To continue password entry, enter 'a1b2c3'.In case of emergency,enter an emergency phone number-- i dont wanna go to the supplier is it possible to do this myself??? pls asap help =]

4GB SDHC card on WM5 XDA Orbit

Hi Everyone,
I have Xda Orbit by O2 bought in 2007, used it for only few months and since then it's been sat there in the box, have just started using it again and needed to put a bigger card (I have never used any memory card in it, and it dosn't even detect my SanDisk 4gb SDHC), now after all the search, it says i'd have to put a newer version of windows mobile in it, mine one is on WM5.
O2's website won't provide me with an update as they only have new XDA's listed on their website. upon my research i have found out on this forum that by putting this file called "SDHC-Artemis.cab" would make SDHC 4gb up and running, now the question is will this .cab file work on WM5? Where from i get it and how do i install it?
Plus any suggestions on how can i upgrade my WM5 to WM6 as i don't have any genuine copy of it, are the ones available around some cracked versions or something?
Many thanks in advance!!!

did u get your phone from the UK??
try this thread....I just flashed it today, works perfectly!
http://forum.xda-developers.com/showthread.php?t=455130
You may want to upgrade the radio rom to 3.34.90
...and I have no idea about the SDHC issue.

Thanks Klee, Yes i bought the phone from UK around Jan, 2007. Just called O2people but they said they can't do anything, which was very bad, and we can't even go to the manufacturer.
Sony Erricsson provides 3 years manufacturer's warranty even after your service provider stops.
well, have you tried putting in any bigger memory card after you have put WM6 in your phone?
which installation process did you follow, any tips? shall i use AutoSync which came with the phone originally?
Many Thanks for your help, Much Appreciated!!!!
by the way Would i have to Crack this windows or is it ready to go or something?

Basically first install activesync, run activesync and connect your phone to the computer
wait until your phone finishes syncing and all that, double click the exe file you downloaded in the thread I gave you earlier.... follow the instructions, after ~10 minutes, a working wm6 phone!
This is the official upgrade, so there is no need to unlock the phone first.
about the sdhc issue....I've never tried anything over 1GB, as I don't have the need for a bigger card, so I've no idea. I believe there is an SDHC cab somewhere floating around here, try searching for it
Hope this helps.

Thanks a lot mate,
this surely and definitely is helpful, i have downloaded the file, but haven't put it on the phone yet, as i don't have any spare phone for "just in case".
once i get a cheap standby phone i'll install it, very much looking forward to it.
and yes, i have thoroughly searched about the SDHC issue, and there is a patch available which i'll run once i have got WM6 sorted!
Kind Regards!!

Xda orbit rom download link please
Hi did u flush your xda orbit with windows mobile 6 if yes which one because on the site it don’t show the xda orbit, (which rom shall I select) , if yes can u provide the link to download the rom please, also after flushing with wm6 lot of people on the forum claiming problem with wifi, gps, and Bluetooth one or the other , have u had any problem with any of this, please help will be appreciated thanks

Hi klee,
I have managed to put the newer version of windows you suggested onto my phone, and it seems to work fine, have got my 4gb MicroSD card working too, by the help of above .Cab file i mentioned. can't manage to stream videos despite of trying several different utilities, i have installed .Net framework as well but still can't run the Cab files, any suggestions?
Best Regards,
Ahsan