guys very sorry if this is in the wrong section
I have a massive problems been reading for days now and i cant seem to sort the problem out, going mad please please i beg you to help me....... ok here goes
i have a htc touch hd, with my chaeffer work software on it, now this software works perfect no problem job come through, messages ect.......
now when the screensaver kicks in the application is still running, however the ring tones/alert on the application turns off.... the job/message come through however it does not ring or alert me the way it should do when screensaver is off
this then cause me to loose the job or miss the message until i physical unlock the screen and check ever couple fo mins
this is a massaive problem as i have turned of my screensaver from the settings and the battery is getting drained
is there a fix for this please? please advise as i dont mind testing/replacing or even repairing files
you guys are my only hope, i have read someone (biker) had the same problem for tomtom7 when the screen locks tomtom volume cuts out
thanks
Moved to Themes, Applications and Software forum.
Im guessing by screensaver you mean screen turns off/dims?
Which ROM are you using and what screensaver app are you running?
ClydeB1 said:
Which ROM are you using and what screensaver app are you running?
Click to expand...
Click to collapse
yes i mean the dim/ blank screen
not sure about the rom but the phone is box standard no other apps have been put on it apart from this work application
screen is normally on, dims after few seconds manbe 1 minute, then goes blank (or like a sleep mode) however this sleep mode is where the problems start
thanks guys any help will be appreciated.
hi,
when i connect my touch HD a screen comes up that asks if i want activesync or to use the card reader mode etc. how can I pull up this program anytime i want without having to unconnect -> reconnect the device? anyone know the path to this program?
tgwaste said:
hi,
when i connect my touch HD a screen comes up that asks if i want activesync or to use the card reader mode etc. how can I pull up this program anytime i want without having to unconnect -> reconnect the device? anyone know the path to this program?
Click to expand...
Click to collapse
stop hi-jacking threads
ddino said:
stop hi-jacking threads
Click to expand...
Click to collapse
huh?? this thread doesnt say "htc touch hd" ?
how bout you provide a VALUABLE reply instead of this nonsense.
anyone got any update on this? i believe tomtom stops working also when this screen saver kicks in please help me out
as it is draining my battery life
How do your messages come through? Are they via sms? If so you can use an app called HD Tweak to wake device on new message. As for TT, perhaos invest in a car charger and then you don't have to worry about the battery.
ddino said:
anyone got any update on this? i believe tomtom stops working also when this screen saver kicks in please help me out
as it is draining my battery life
Click to expand...
Click to collapse
I know this is not much of a solution but if you go to settings tab -- all settings (bottom left corner) and then in the middle tab (cant remember the name) --- power.
in here, go to the 3rd (last tab) and there you can disable the screen dimming and and sleep mode (first 2 options) by unchecking them
I am also using TomTom in the car at the moment and yes it does drain the battery...i think that asides from getting a car charger (they're cheap - just look for a in-car USB charger and use your USB cable), the best alternative is to let the screen dim, but NOT switch off. So let your screen turn off its backlight, and that should extend your battery life considerably.
Also, maybe try some of the solutions listed in this thread:
http://forum.xda-developers.com/showthread.php?t=483034
(i got that from a forum-wide search)
Good luck
ok guys bit more info
not worried about tomtom working whilst screen off that was just a example i gave, however my chaeffer work software does not ring/alert me when the screen is locked
now the software works via gprs and log's into my office server when they get the booking it gets logged into there system and routinly passed down to the drivers
i have a car charger but the problem is i am not in the car all the time, or near a mains supply only go to the car when booking come through
now is this a programming issue by the company i work for? if so, what could be done to correct this?
i am looking at some after market apps play around with them and see how i get on.
thanks you for all your help so far
Related
Hi,
If you click on the on/off button, does the ppc really turn off ?
In fact I'd like to know how works the alarms ? Because you turn off the PPC and something (a system process ..?) must check the hour to wake up the ppc, launch the alarm ...
So is it possible to let an application running when the ppc is off ?
I answer myself
The solution for me is to use CeRunAppAtTime which wakes up the PPC with an application at the time set. Don't know if the standard alarm use this function but for my purpose it is perfect.
Love this site
Hmm, except that if you keep the GPRS connection up when in suspend mode, the CeRunAppAtTime runs the app, but does not turn on the display!
I have also tried raising a notification, and the display commands that media player uses to toggle the screen, but these don't work either.
Does anyone know how to get the display to come back on programatically when the device is suspended but the GPRS session is still connected?
Many thanks
Matt
zendrui said:
I answer myself
The solution for me is to use CeRunAppAtTime which wakes up the PPC with an application at the time set. Don't know if the standard alarm use this function but for my purpose it is perfect.
Love this site
Click to expand...
Click to collapse
doesn't seem to work anymore with 2003 though. Except when the device is connected to AC power.
Personnally I used CappRunAtTime to make my own alarm app to wake me up with mp3. And it works well. If the PPC is on it just launches the app, if the PPC is off it starts the PPC (screen on ...) then launch my app ...
mattevans said:
Does anyone know how to get the display to come back on programatically when the device is suspended but the GPRS session is still connected?
Matt
Click to expand...
Click to collapse
You mean that if you have your GPRS always on, you turn off the ppc et the CeappRunatTime does not come back on ?
Wow I'm waiting my SD card adaptater to install the new rom, mainly for the 'always GPRS on'.
A question for both of you: does the standard alarm work ? I mean does it turn your screen on..? Because I supposed that the standard alarms work with CEappRunatTime ?
Hi
Yes the alarms turn the screen back on when gprs is set to always on. And that was how I thought the system did it by triggering the calnot.exe and clocknot.exe apps using cerunappattime. Although I was triggering the app to run a second in advance, and since then we have changed that to 10 seconds that that seems to work ok, it now turns the screen back on even when the device is 'pretending' to be suspended when gprs is always on.
Just curious, why do you need an SD card adaptor for upgrading the rom? You can just use the usb cradle, of course you have to have a pc and all the software i suppose...
Matt
mattevans said:
we have changed that to 10 seconds that that seems to work ok
Matt
Click to expand...
Click to collapse
I did the same thing (sleep(2000)) in my application to be sure that all the system processes are well woke up before I start the mp3 functions. I'll keep in mind that woke up the ppc, when GPRS is always on, may take a little more time.
mattevans said:
Just curious, why do you need an SD card adaptor for upgrading the rom? You can just use the usb cradle, of course you have to have a pc and all the software i suppose...
Matt
Click to expand...
Click to collapse
I just wait the SD card adaptator to save my actual rom, which is a French Rom, before doing the upgrade. Just in case because I don't think Bouygues (from which I bought my XDA) will provide updated rom in french.
It seems that the cerunappattime doesn't like waiting for the time if you set it less that about 10 secs in the future, seems to just run the app straight away, and that didn't trigger the ce to wake up...
wierd, put it to 10 secs and it woke up fine. Don't think it has anything to do with powering up the system as it is mostly powered up anyway when gprs is always on.
Matt
well I always test it by launching an application one minute in the future so I never saw that case :wink:
Hi, first of all thanks for taking the time to read this.
I have a problem with my artemis p3300, it´s not concerned with any rom since it does it with the original ROM too.
So the thing is.
when it enters stand by mode, if i have ANY multimedia player, ie. media player, S2p or any other open, it didn´t have to be playing, only open in bg, i can´t enable the phone again, i have to keep with the button pressed until the message if i want to turn my phone off appears, or else it turns of again.
i searched everywhere if anyone else is having this specific problem, but i can´t find the right words to describe it in a search engine
anyway, thanks for the time you took to read the thread and please if you have any info regarding my problem i would appreciate it.
Thanks
Hevvy said:
Hi, first of all thanks for taking the time to read this.
I have a problem with my artemis p3300, it´s not concerned with any rom since it does it with the original ROM too.
So the thing is.
when it enters stand by mode, if i have ANY multimedia player, ie. media player, S2p or any other open, it didn´t have to be playing, only open in bg, i can´t enable the phone again, i have to keep with the button pressed until the message if i want to turn my phone off appears, or else it turns of again.
i searched everywhere if anyone else is having this specific problem, but i can´t find the right words to describe it in a search engine
anyway, thanks for the time you took to read the thread and please if you have any info regarding my problem i would appreciate it.
Thanks
Click to expand...
Click to collapse
This must be a really rare thing since 117 views and not just one knows anything about it
its a common battery issue
does this meen i win for answering? lol
1) you need to buy a new battery from ebay (or somewere simular)
2) keep device off after inserting new battery.
3) charge untill device shows green LED
4) turn device on
click the thanks button, you know you want to
thanks
i will try that and see how it goes
np dude,
BUT...
if i was you i would flash a new rom before you buy a new battery.
*if it still happens with the new rom, its definatly the battery.
i already tried a looooot of roms and all do the same, even original one´s..
thanks once again
cool, definatly the battery then dude..
make sure you dont turn the device on untill the battery is fully charged..
also, make sure you buy an Original Artemis/P3300 battery..
(i wont bore you with the reasons why, its just better if you do )
Hi guys!
I have Artemis with battery drain after chinesse charger damaged (something exploded inside charger)
Tryed with new battery - less then 12 hours and discharged.
HELP!!!
I don't know what goes wrong...in recent days, the screen auto turn itself back on even I press the right side button to close it... I don't know what to do now.. is there some app run itself to turn the screen on??? it's very annoying.. how can I found out the root cause for it and fix it???
Thanks a lot!!!
Your USB port is probably messed up and your screen is turning on because the phone thinks its charging.
Clean out your port and make sure the connector is straight.
Sent from my Galaxy Nexus using xda premium
You mean physically clean the USB port on the bottom of the phone? But the screen auto on issue happens even when my phone is not plugged in USB.... Thanks
minidisc_md said:
You mean physically clean the USB port on the bottom of the phone? But the screen auto on issue happens even when my phone is not plugged in USB.... Thanks
Click to expand...
Click to collapse
El Daddy suspects the USB port is somehow dirty enough to make the phone *think* it's being charged, wich causes it to turn on the screen. You could test this by using the Tasker app: make it write to a logfile or give a toast/notification on the state power (any). If it logs a power source while there is no cable connected: tada.
I'm not sure if there is a permission in Android that allows an app to turn on the screen. I doubt it however.
Human interesting insight... is the application called "tanker"? Is there any free application can do this log?
I once thought there are some app that used my GPS or running in background to periodically turn my screen on....
It's called Tasker. You can download a trial version (7 days) here: http://tasker.dinglisch.net/download.html
it's hard to say how many applications can do this. you'd better list all you applications here.
Hi,
Ive googled about this matter and cant seem to find a solution for the galaxy tab s lte but for other samsung devices since s3 is possible.
Ive also tried the Auto Power On app (paid apps) both of them didnt work and requested a refund.
It seems that we have to modify the file /system/bin/playlpm or /system/bin/lpm or /system/bin/ipod for this to work.
Ive tried everything and still doesnt work on the galaxy tab s lte.
What i need is for the tablet to boot upon connected to charger when the state is off. Now all i can see is the battery icon stating its charging but never boot into android.
Anyone have any idea how to make this work for the galaxy tab s lte?
Cheers.
Well it begs the question as to why in the world would anyone want this?
I wouldn't want my tab on every time I charge it.
I think you would need a custom rom, don't the apps you can download/buy, need your device to be already running so they can shutdown or run an app or change a mode when they detect you plugging in or removing the charger.
John.
ashyx said:
Well it begs the question as to why in the world would anyone want this?
I wouldn't want my tab on every time I charge it.
Click to expand...
Click to collapse
ashyx said:
Well it begs the question as to why in the world would anyone want this?
I wouldn't want my tab on every time I charge it.
Click to expand...
Click to collapse
Why would anyone need this? Let me answer you.
Some of us use our android tablets in cars ... There's app to make the tablet shutdown when u turn off the engine and the power is disconnected (tons of them).
But when u start the engine back and the power is re-connected, the tablet wont turn on. Right now the only solution i can do is to use tasker to airplane mode on the device when the display is off, and airplane mode off when the display turns back on. This saves power so that the tablet doesnt run out of juice overnight in the car.
So most of this has to do with in-car tablet systems that you want it to boot up as you start your engine. I can custom rom my tablet to run CM12 however even CM12 doesnt boot up, some settings needs to be changed and im not sure which part so i need some help on this.
Cheers.
ashyx said:
Well it begs the question as to why in the world would anyone want this?
I wouldn't want my tab on every time I charge it.
Click to expand...
Click to collapse
And btw .... iPhone iOS Behavior is exactly like this ... So no body is begging the question of why anyone would want this ... Just you i guess
arsyan said:
And btw .... iPhone iOS Behavior is exactly like this ...
Click to expand...
Click to collapse
Another reason not to want it then
LOL thats a good one ....
Anyway back to serious matter ... Any one out here can help me with this problem? I think it would help a lot others too that are looking for a solution. a CM12 solution would be great also coz i can flash the tablet with CM12.
Thanks in advance.
arsyan said:
And btw .... iPhone iOS Behavior is exactly like this ... So no body is begging the question of why anyone would want this ... Just you i guess
Click to expand...
Click to collapse
C'mon. You and I both know that this is a niche scenario, and normally it's a bad idea. If your running low enough on battery to run you device dead, you want it to charge a while before turning on. We've all been waiting on a dead phone to get a few percentage points charged so that way it doesn't die immediately upon startup.
I've been leaving my Tab S on a constant power supply in the car. This means I have to turn it on and off manually. I have been toying with using Tasker to turn the screen on/off based on connection with a BT device that would be powered by an switched power source.
The problem I get is warning messages about trying to charge the battery while it is too hot or too cold.
stm8 said:
I've been leaving my Tab S on a constant power supply in the car. This means I have to turn it on and off manually. I have been toying with using Tasker to turn the screen on/off based on connection with a BT device that would be powered by an switched power source.
The problem I get is warning messages about trying to charge the battery while it is too hot or too cold.
Click to expand...
Click to collapse
Why dont u try this app https://play.google.com/store/apps/details?id=com.as.powerchecker it will close the android once ur power is disconnected from the car ...
As for turning it back on when u start. Still no solution ...
Any help guys? Last time asking ...
Using Tasker and Secure Settings, I can get the tablet to turn the screen on and off when the power is connected. If rooted, you could turn Airplane Mode on and off in Tasker also. But short of a change in the firmware, I have no idea how to power off and restart based on external power connection.
From what I remember, when CM12 was still buggy... when you connect a charger when it was powered off, it would show the battery icon and automatically reboot into recovery. Of course that was a bug, so I don't really know.
-DUHA
Same here, did you find an answer?
Same here but no solution found
Iam trying to set my tablet to auto start/boot when charger is connected in mini usb port. I didnot find lpm.sh in root\system\bin folder to modify. But i found ilm file with below script. Plz tell how to modify to make powered off tablet to boot when charger is connected.
Script to start "pm" on the device, which has a very rudimentary
# shell.
#
base=/system
export CLASSPATH=$base/framework/ime.jar
exec app_process $base/bin com.android.commands.ime.Ime "[email protected]"
You can instruct init to reboot the device whenever charger mode is detected. Create a new .rc file or edit any existing one:
# /system/etc/init/off_mode_charge.rc
on charger
setprop sys.powerctl reboot,leaving-off-mode-charging
Source: https://android.stackexchange.com/q...ower-on-android-when-the-charger-is-connected
Just got my H7x Saturday and am blowin away that a phone this nice can be had for under $200usd.
Anyways, Whenever I have the phone connected to the power-cord(charging) the screen won't turn off. I'll wait for the 60sec I have it set to, fade, the screen turns off, and then right back on immediately. Does the same when connected to USB on a windows computer. Charging only, file transfer etc. does it no matter the mode.
Any input with help would be greatly appreciated... Thank you
edit***All software is up to date via OTA
NeWcS said:
Just got my H7x Saturday and am blowin away that a phone this nice can be had for under $200usd.
Anyways, Whenever I have the phone connected to the power-cord(charging) the screen won't turn off. I'll wait for the 60sec I have it set to, fade, the screen turns off, and then right back on immediately. Does the same when connected to USB on a windows computer. Charging only, file transfer etc. does it no matter the mode.
Any input with help would be greatly appreciated... Thank you
edit***All software is up to date via OTA
Click to expand...
Click to collapse
This setting is normally defaulted to off, but check the development option "stay awake"
No, it's set to off. But good call.
It seems like the screen saver would make it do this too. I just noticed that everytime the screen comes on, it's a different picture. However, settings>display>screen saver is off.
Just figured it out.
Under settings>Apps and notif...>notification and status bar> I had 'notifications turn on screen' turned on. That's what was causing it. Strange...
Can anyone else test for this?
NeWcS said:
Just figured it out.
Under settings>Apps and notif...>notification and status bar> I had 'notifications turn on screen' turned on. That's what was causing it. Strange...
Can anyone else test for this?
Click to expand...
Click to collapse
Most users are on roms right now, I suggest you do he same.
And, no need for other people to test for this, you fixed the problem.
crayonicle said:
Most users are on roms right now, I suggest you do he same.
And, no need for other people to test for this, you fixed the problem.
Click to expand...
Click to collapse
I guess I could root and rom. I am just so impressed with the battery on the stock rom I was going to try and keep it as long as I can.
What ROM do you suggest?
And I didn't fix the issue. Just turned it off... Its still an issue for people who want thier screen to turn on when they get notifacations.
Thanks for the help!
NeWcS said:
I guess I could root and rom. I am just so impressed with the battery on the stock rom I was going to try and keep it as long as I can.
What ROM do you suggest?
And I didn't fix the issue. Just turned it off... Its still an issue for people who want thier screen to turn on when they get notifacations.
Thanks for the help!
Click to expand...
Click to collapse
Openkirin roms are good, but the support chat in telegram is a bit toxic...
Also, any hi6250 rom will work well, like with the p8 lite 2017; roms there work on the honor 7x too, i've tested.