Related
Hi
can anybody please help with decomiling ETEN Romz so that we can customise it and tweak it like HTC romz.
reo
Try this attach
Usage:
prepare_imgfs_eten.exe temp.dat
then mamaich viewimgfs
Hi
thanks i have this file, and yes it does work to disassemble rom. but i had a problem reassembling.
i am still testing this, i will fill everyone in.
regards
reo
OK, continue
...modify "dump" directory as you need...
BuildImgfs.exe
make_imgfs_eten.exe temp.dat
hi
thanks, but my problem was actually this part. i should have been more clear. when i done a recompile with build the OS did not come out correct. it seems that it got damamged and when i loaded it to my phone it froze up on boot logo.
is there a limit on the amount of changes u can make in the OS part ? mayb it must not go higher than a certain file size ?
i however have successfully changed the startup logo, and extrom and created a new ROM. only the OS part has been a problem.
regards
reo
How Can I extract the ROM from Eten?
reo
These tools were tested on M500, M600, G500.
If you disassemble temp.dat to dump folder, and then built temp.dat without any changes in the dump folder, the resulting file temp.dat is working?
I tested this, but unfortunately after i reassemble it does not recombile identically. so when i compare there are differences.
however, i have noticed that if you do not have the PPM from itsme repository then you will get 652 files extracted, when you should actually recieve 1117 files
regards
reo
prepare and make imgfs works. when i open reassembled temp.dat again with prepareimgfs - viewimgfs extracts files normally (About 102mb). But comparing with hex editor, first 51,880,508 byte is ok then it changes. After every 513 bytes there is extra 7 bytes in orginal rom. I think Eten made some protection. For example in rom ver.230 bootscreen image (JPG) is located at first lines of rom. But every 512bytes of image there is FFFF FFFF. So i removed FFs and i got bootscreen image
uas, could you give me prepare_imgfs_eten source? i want to see how it works. i am not a programmer but i made a little perl code which adds FFFF every 512bytes of a file. For making bootimages for putting into rom.
Reo i couldn't start bootloader anymore after i made a modification on rom. Could you give me any suggesttions? Forgive my english if there is sth wrong....
All perl scripts for eten roms are in the Russian forum
http://forum.wce.by/viewtopic.php?p=78923#78923
(Registration required)
thanks very much..
can someone make a Eten G500 rom with a bigger page pool ?
UAS,
Thanks a lot for your tools. It works perfectly on my M600 and I am going to write up an tutorial how to customize the rom in detail
jackleung said:
UAS,
Thanks a lot for your tools. It works perfectly on my M600 and I am going to write up an tutorial how to customize the rom in detail
Click to expand...
Click to collapse
oh, please do.......i have been eagerly waiting for someone who are able to explain the extraction of eten rom in details, please jackleung.
sfliu said:
oh, please do.......i have been eagerly waiting for someone who are able to explain the extraction of eten rom in details, please jackleung.
Click to expand...
Click to collapse
My draft (not finished yet)
http://www5.discuss.com.hk/viewthread.php?tid=4127717&extra=page=1
jackleung said:
My draft (not finished yet)
http://www5.discuss.com.hk/viewthread.php?tid=4127717&extra=page=1
Click to expand...
Click to collapse
thank you very much for your effort, this really make my daylooking forward to your complete tutorial.
initflashfiles.dat you can get from the windows folder on your device.
It must be in Unicode but without the first two bytes FFFE Unicode sign.
Localized names must be like as:
Directory("\Windows"):-Directory("\x0428\x0440\x0438\x0444\x0442\x044B")
uas said:
initflashfiles.dat you can get from the windows folder on your device.
It must be in Unicode but without the first two bytes FFFE Unicode sign.
Localized names must be like as:
Directory("\Windows"):-Directory("\x0428\x0440\x0438\x0444\x0442\x044B")
Click to expand...
Click to collapse
But seem like Eten's PDA doesn't come w/ one. Use initflashfiles.dat from other as template and make one from scratch is quite time consuming and error prone (especially w/ Chinese rom w/ chinese file name and directory). For me, I just manually move the files and directories once. Do a SPB backup and use the backup files for initialization after ROM update.
How to custom build Eten Rom
Let me thanks UAS for the tools first
I put all require programs, and user.txt and default.txt (registry for *** Traditional Chiniese Rom ***) into a signle package. Here http://rapidshare.com/files/30073907/eten_rom_cook_package.zip.html
Steps
******************
U will find the steps are very similar to cooking Asus P525 here http://www5.discuss.com.hk/viewthread.php?tid=3788644&extra=page%3D2
***** Section 1: obtain the imgfs_raw_data.bin from the rom *****
1. Download my Rom edit and update package (addfile.exe, buildimgfs.exe .... etc.)
2. In File Explorer, put "%temp%" as address and it should bring you system temp directory probably "C:\Documents and Settings\<yr winodows user id>\Local Settings\Temp", U may want to do some clean up if lots of files there.
3. Run the Eten Rom update program (e.g.: EUU_M600_CHT_R22_101_0230HK_WinXP.exe)
4. No need to connect yr M600. Follow the update instructions step by step and you will eventually see a files: temp.dat (~73mb). Copy the Rom file (Temp.dat) to other folder and extract my package there.
5. create the imgfs_raw_data.bin file by "prepare_imgfs_eten.exe" ONLY
***** Section 2a (Modify Rom content by Add/Remove files) ******
This method is very easy and relative low risk
1. Remove files in the Rom by "Delfile.exe <file name in the rom>"
2. Add files to the Rom by "Addfile.exe <file in yr computer>" (If the program crash, the rom is probably full)
***** Section 2b (Modify Rom content by extract and re-package) *****
More complicate and BuildImgfs.exe take a long time to build a package. But this method ismore flexable and manageable.
1. extract the content by "viewimgfs.exe imgfs_raw_data.bin"
2. add/replace/remove files in the dump directory
3. package the content by back to imgfs_raw_data.bin by "BuildImgfs.exe" (take a shower then come back )
****** Section 3 (optional: Modify the registy content of the Rom file) ******
1. Get the default.hv and user.hv from 2b.1
2. do the following in DOS to convert the registry to readable format :
REM ****************************
SET _FLATRELEASEDIR=.
rgucomp -o default.hv -nologo > wwedefault.txt
rgucomp -o user.hv -nologo > wweuser.txt
REM ****************************
(note: If you are modifing Chinese Rom, rgucomp does not support Chinese Ouput and you need to manually fix the output file (or use mine in the package as yr template)
3. Add "REGEDIT4" in the beginning of the files, leave a blank line atthe end of the file and save the file as UTF-16 or Unicode format. (Ultra-Edit is very good editor for this)
4. Edit the files for registry setting
5. Do the following to replace the registy file w/ yr modification
REM *** Registry ****
Delfile.exe default.hv
Delfile.exe user.hv
attrib -h -s -r *.hv
SET _FLATRELEASEDIR=.
copy /y wwedefault.txt boot.rgu
RGUCOMP -b
copy /y boot.hv default.hv
Addfile.exe default.hv
copy /y wweuser.txt boot.rgu
RGUCOMP -b
copy /y boot.hv user.hv
Addfile.exe user.hv
REM *** Registry ****
******** Section 4 (Optional: Create Folders or copy files from \Windows to other directory)
1. initflashfiles.dat not present in Eten rom, U can create one and put it in the rom. But I can't make my M600 to boot properly w/ this
******* Section 5 Convert imgfs_raw_data.bin temp.dat***************
1. make_imgfs_eten.exe
******* Section 6 Update yr M600 w/ the modified rom***************
1. Copy the temp.dat and RUU.exe (from my package) back to %temp% directory
2. Connect yr M600 and wait for MS Activesync to connect first
3. Run RUU.exe and follow the instruction.
My customized M600 Hong Kong Rom
Don't ask me for M600+ rom since I don't have M600+, and I will not have time to customize build for others. So, take it or leave it (but I might do bug fix and update if there's any). Please feel free to give comment.
*** ROM based on Hong Kong 230 ROM (EUU_M600_CHT_R22_101_0230HK_WinXP.exe) ***
What's get removed from my customized rom:
1. Eten phone firewall (replaced by CALL SMS Blocker)
2. MSN & Msn messenger (replaced by MSN Live and Live Messenger)
3. Eten phone profile manager (Replaced by Pocketmax Phone alarm)
4. Calculator (replaced by Omega 1-Calc)
5. Pocket Excel (Install Softmaker Office if you need a REAL excel program)
6. Pocket Powerpoint
7. Mandarin Voice Command (replaced by Cantonese)
8. Error Reporting and Irda driver
9. Eten backup problem (Replaced by SMS backup Genius and SPB Backup)
10. Quick Link
11. Lots of other junks
What's buildin: (all the tricks I mentioned here: http://www5.discuss.com.hk/viewthread.php?tid=2505945&extra=page=1)
1. USB Host
2. Eten backup battery patch
3. Eten Skype Setting, and Skype
4. SPB Safe Mode and AltTab
5. AE Button Plus
6. Resco Audio Recoarder
7. Resco File Exploer 5.42
8. MemEmpty
9. Multipad.exe
10. No Plugins Today
11. TCPMP Player
12. Pocket Alarm
13. Resco Photo Viewer and screen capture
14. Task Manager
15. Celedial and CeleTask
16. WM5NewMenu
17. Wisbar Lite
(Not all the apps are registed or some of them registered under my name, you may need to look for the SN yrself)
To Install:
1. Follow instruction 6 on my previous post to load the rom
2. put the exe file on yr PDA and run it to have the needed files in place
Dowload link: http://rapidshare.com/files/30225309/eten.rar.html
Hi!
After a long time of trying to cook custom roms in greek language I am ready to post a small tutorial on how to translate your Rom to your Language using kitchens with a quick and dirty way .
Attention there is a better way to do so but this is what I Do to make my Greek ROMS
Step 1)
a)Download your language emulator Files from
http://www.microsoft.com/downloads/details.aspx?FamilyID=38c46aa8-1dd7-426f-a913-4f370a65a582&DisplayLang=en#filelist
(b) extract the files in a new folder.
Slumpolo 's suggestion:
-----
to extract files from the emulation rom follow this direction:
- Download Tadzio's imgfs excelent tools in: http://forum.xda-developers.com/showthread.php?t=298327
- Unzip the tools along with the image in any folder.
- Rename the image to A.BIN (to make the next commands easier to type).
- Open a D.O.S. command window and perform these commands:
Code:
> NBSPLIT -emu A.BIN
(it generates two files: A.BIN.EXTRA and A.BIN.PAYLOAD)
> IMGFSFROMNB A.BIN.PAYLOAD IMGFS.BIN
(it generates the file IMGFS.BIN)
> IMGFSTODUMP IMGFS.BINAnd that's all. Files are dumped in /Dump directory
-----
Click to expand...
Click to collapse
(c) Rename ALL the 4xx files to 409 (e.g. 0408.mui -> 0.409.mui) Apply this to all files and folders (an eyasier way to do that is to search from windows for all *408* files and then rename them)
Slumpolo's suggestion
----
For step 1c) during the translation of italian rom for the mui files that resides in directory I edited also a file (simply with Supered) that has a line that pointed to the 0410 files (ea. italian) and changed this to 409.
----
Click to expand...
Click to collapse
Step 2)
Find your BASE ROM.
Step 3)
Download your Kitchen. I prefered Anichillus kitchen due to the fact that supports ROM dumping in an easy way
Step 4)
Dump ROM ( If you use Anichullus Kitchen , follow the manual but Stop BEFORE using Bepe's Package TOOL !
Step 5)
Go to DUMP folder ,(eg C:\core\extract\dump) and paste ALL the language files you have renamed from step 1c . ATTENTION you have to copy and paste ALL files from your language folder AFTER you have renamed them to 409 . REPLACE duplicate files
Step 6)
Continue with kitchen steps . For instance if you were to use Bepe's Package TOOL , go on and build the packages.
Step 7)
Edit Initflashes.dat file . Information on how to do that are in every cooking tutorial. In Intflashes.dat file you will have to translate all the links and directories according to your language files. CAUTION if you make mistakes in translation your WM6 will be crappy and programs may not start
->In order to make a good translation check your original rom, or try the WM6 emulator wth your language files and check the directory names (eg
folder Programs in Greek have to be Προγράμματα)
Step 8)
Save Initflashes.dat in unicode and remove first two bytes with a hex editor
Step 9)
Choose your OEM packages.
For GREEK USERS : If you need a greek software keyboard like the original one I have made an OEM package that allows you to do so
Slumpolo's suggestion
------
For step 9) / 10) about keyboard, you must add with a oem package also:
- dictionary in your language
- settings for your language
- t9 dictionary for your language
- for keyboard layout make this registry mod:
Code:
Registry Editor:
HKCU >> ControlPanel >> Keybd
Create a string "Locale" with "0410" vale. Everything without "Where 0410 is your country value.
------
Click to expand...
Click to collapse
Step 10)
build your rom according to your kitchen manual
I hope this helps
Good luck with your tries
I have used the same method for the italian version but you must translate also some parts of .hv files and .rgu or you must pay more attention during the translation of initflashfiles.dat because not all links and directories can be translated without .hv and .rgu editing.
My suggestion? Edit only initflashfiles.dat
Some add for your excellent tutorial:
----
For step 1b) to extract files from the emulation rom follow this direction:
- Download Tadzio's imgfs excelent tools in: http://forum.xda-developers.com/showthread.php?t=298327
- Unzip the tools along with the image in any folder.
- Rename the image to A.BIN (to make the next commands easier to type).
- Open a D.O.S. command window and perform these commands:
Code:
> NBSPLIT -emu A.BIN
(it generates two files: A.BIN.EXTRA and A.BIN.PAYLOAD)
> IMGFSFROMNB A.BIN.PAYLOAD IMGFS.BIN
(it generates the file IMGFS.BIN)
> IMGFSTODUMP IMGFS.BIN
And that's all. Files are dumped in /Dump directory
----
For step 1c) during the translation of italian rom for the mui files that resides in directory I edited also a file (simply with Supered) that has a line that pointed to the 0410 files (ea. italian) and changed this to 409.
----
For step 9) / 10) about keyboard, you must add with a oem package also:
- dictionary in your language
- settings for your language
- t9 dictionary for your language
- for keyboard layout make this registry mod:
Code:
Registry Editor:
HKCU >> ControlPanel >> Keybd
Create a string "Locale" with "0410" vale. Everything without "
Where 0410 is your country value.
Next days I'll try to release an
Ciao
At last
Very good..now i can direct all people who ask this question here.
Great initiative
Thanks
Slumpolo
Updated
Tna said:
Thanks
slumpolo can you post info about the which parts of hv files you edit?
Click to expand...
Click to collapse
I'll post everything next week. All my files are in office
Ciao
btw. as far as i know only certain wm6 builds can be translated using EMU mui files. i dont remember build no's.
Why is that ? What are the restrictions?
does it work for Universal to ?
thats what i wrote above, as far as i know(consulted with bepe) 17913 build its not supported(latest uni) it must be build ???? i remember there is 4 in build no. cannot fint irc log with that conv. with bepe
Hi and thanks for your tutorial. I try to go a different way and want to port over a hermes mui cab to get german wm6. i have some trouble of getting it done.
- the file explorer draws no softkeybar, so it is not usable. does anyone know what files i need therefore?
- the free space when installing a cab isn't displayed correctly
what have i done?
- i took the cab from asukal and removed hermes specific things
- afterwards i copy the files from the emulator image to get newest versions of the files.
if somebody want to test it - here you go:
http://www.gsm-multifund.de/holg/Making_German_Wizard.cab
i would appreciate every help.
best greetings
holg
answer from midget about builds that can be translated:
Code:
the changes from 17740-5 are not language related so the mui's work for all of them
i tried a newer rom and also got no luck with the file explorer. does anybody know what file is responsible for translating the file explorer?
No i don't... since file explorer is the least used program i didn't really care about it ...
so sorry but i can't help in that ... why don't you leave it as it is ?
i think filesys.exe.0409.mui
I think that he has found the file. The problem is about the softkey .
Try using reshack tool (it can be found in most kitchens) and open the mui file. search for the softkey
But yet I am not sure ...
yeah thanks for the suggestions
i personally like the build in filexplorer, cause it is fast and has softkey control, it's good if you just browse and open a file.
filesys.exe.0407.mui is already inserted in windows directory, so i will test with reshack,but at the moment i am a little busy.
Doubt about Files
Hi people
About the translation... i have one question.
After doing the "IMGFSTODUMP IMGFS.BIN" command, and all files are in the Dump Directory... besides the files with 4xx names, there are also some folders with 4xx names... and inside those folders are some files also with 4xx names.
Do i have to rename the folders and the files inside those folders, or just the files... or just the folders.
And one thing more... for example the folder "bbcbres.dll.0816.mui" inside these folder, one of the files called "imageinfo.txt".. inside this txt there's something written on the first line : " Module name: bbcbres.dll.0816.mui" if i have to change the name of the file inside the folder called "bbcbres.dll.0816.mui".... do i have to change this line also inside the txt ???
Thanks
how about the hardware keyboard? because I am on a German MDA Vario, Wizard of course, since we are using QWERTZ instead of QWERTY?
Will this be fixed automatically as well?
Cheers.
PauloBarreiros said:
Hi people
About the translation... i have one question.
After doing the "IMGFSTODUMP IMGFS.BIN" command, and all files are in the Dump Directory... besides the files with 4xx names, there are also some folders with 4xx names... and inside those folders are some files also with 4xx names.
Do i have to rename the folders and the files inside those folders, or just the files... or just the folders.
And one thing more... for example the folder "bbcbres.dll.0816.mui" inside these folder, one of the files called "imageinfo.txt".. inside this txt there's something written on the first line : " Module name: bbcbres.dll.0816.mui" if i have to change the name of the file inside the folder called "bbcbres.dll.0816.mui".... do i have to change this line also inside the txt ???
Thanks
Click to expand...
Click to collapse
You have to change all the *0816*. There is no need to change the folders al long as you rename the *.816* files that are included in those folders. There is no need to change the imageinfo since your are not going to replace the original one.
After renaming All the files (including the language files inside the folders) then you shoud copy only THESE files to your dumped ROM .
4irm said:
how about the hardware keyboard? because I am on a German MDA Vario, Wizard of course, since we are using QWERTZ instead of QWERTY?
Will this be fixed automatically as well?
Cheers.
Click to expand...
Click to collapse
no ... look for hades language pack to fix that, too
[APP][May21.v0.29b] High Resolution Wallpaper & Slider Editor [all tabs] Cab Creator
This is a small program that will allow you to create high resolution wallpapers for the TouchFlo 3D interface from any image.
Tested on HTC Touch HD, HTC Touch HD 2, HTC Touch Diamond 2, HTC Touch Pro 2, Dutty's Extreme ROMs, Manila v2.0, v2.1, v2.5, HTC Sense
Portrait & Landscape Mode
.NET Framework v3.5 required
.NET Compact Framework v3.5 required for HDWallS
Creating a high resolution wallpaper in 3 steps:
1. Load Image - Press "Load" or drag&drop the image, select crop & resize options or "Auto Crop & Resize"
- optional: Press "Landscape" & repeat step 1
2. Create CAB File - Press "Create CAB", select "Include Landscape / Portrait Wallpapers", press "Convert", then "Create CAB".
3. Copy and install the CAB on your device
- Please select the Profile for your device under "Config". You can press the "Set default" button on the right to make it your default profile.
If you get a white background, select a "... - No Compression" Profile
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
HDWallS - CAB Wallpaper Browser
- Copy cab wallpapers created by HDWall > v0.24b in a folder on your device, e.g. "\Storage Card\Wallpapers CAB". Copy cab files & the thumbnails created by HDWall Cab Creator, e.g. "MyWallpaper.cab" & "MyWallpaper-P.jpg". If no thumbnail is found, a standard icon will be displayed.
- Install HDWallS_v0.24b.cab (from the HDWall folder), start the application from the Start Menu.
- On the first run, select the cab wallpaper folder (can be changed later from "Options").
- Select the wallpaper and press "Set Wallpaper"
- Install only cab files created with HDWall > 0.24b, cab files created with previous versions & "Restart TouchFLO" enabled may freeze during installation.
Slider Icon Editor
1. Press "Slider" in the Main Window
2. Select the icon by using the slider
3. Click the icons on the right or drag & drop .ico or .png icons.
4. Press "Convert" - the selected profile options will be used.
5. Go to "Create CAB", Enter "Slider Icon Set" under "Application Title", check "Include slider icon set" & press "Create cab".
6. Install cab on device.
The fine print:
- Install HDWall on your PC, not on the device
- Install HDWallS on your device, not on the PC
- Select an appropriate name in "Application Title" in the "Create CAB" Window to avoid uninstallation of other cabs with the same name.
- Select "default wallpaper" / "weather wallpaper" in TouchFlo 3D (for some versions)
- There is no need to restart the device after CAB installation, except for applying the taskbar / softkeybar images.
- Disable any "background for all tabs" addons, except for the official Co0kieMonster HQWallpaper patch.
- Disable the default wallpaper for the Home Tab in Manila v2.1 & HTC Sense by removing the data found at HKCU\Software\HTC\Manila\HomeBackgroundPath (don't delete the key, just the valuedata)
- If you get the error "-2147024891" when installing a cab with HDWallS, you can install the cab files manually from File Explorer or try lowering the security policy on your device by changing HKLM\Security\Policies\Polices --> change "0000101a" to "1"
- Change the start menu background in WM 6.5 from Settings - All Settings - Today, or "right click" on an image in File Explorer & select "Set as background".
- If your computer screen has a lower resolution than your phone use the "Zoom out" button on the main window
- On Co0kie's Home Tab v.1.8.5 don't install the wallpaper patch, select "HDWall" in CHT Editor - Miscellaneous - Wallpaper mode, then apply the changes.
ChangeLog:
v0.29b May 21
- New: HTC Sense Landscape support for Co0kieMonster's patch
v0.28b Nov.24
- New: HTC Sense Profiles for Co0kieMonster's Patch
v0.27b Nov.06
- Fix: Landscape Mode in WM 6.5 Profiles
v0.26b Nov.04
- New: HTC Sense (Manila 2.5) Profiles
- New: Rotastrain's Horizon Profile
v0.25b Jul.31
- New: WM 6.5 Profile (beta)
- Skinning of WM 6.5 Taskbar & Softkeybar
- Added Profile for TouchFLO v2.5 BETA
- Slider Editor: Added the very popular Programs Tab
- Removed Folder Browser Component to prevent crashes
v0.24b Jul.24
- TouchFLO Slider Editor
- Selection for standard TouchFLO v2.1 Icon Set
- Import multipage ico & png icons
- Conversion of slider icons based on current profile options
- HDWallS Wallpaper Browser
- Display wallpaper thumbnails
- Silent cab installation
- Select cab folder
- Works with cabs created by HDWall > 0.24b with "Restart TouchFLO" enabled
- Fix: Recompiled SetupDLL v0.2b, fix for freeze during TouchFLO restart
- Improved JPEG Thumbnail Quality
- Increased CompositingQuality
...
How to get HIGH QUALITY wallpaper on your Touch HD! by Rozenthal
CFC - THE Manila/TF3D Image Editor by Chainfire
[Manila Patch] High Quality Wallpaper for Home Tab & Manila Start Menu by Co0kieMonster
Rabbit Slider Icon Set - View attachment Rabbit_Slider_Icon_Set.cab - Icon source here.
DeskToon Slider Icon Set - View attachment DeskToon_Slider_Icon_Set.cab - Icon source here.
to support free software & don't be afraid to say "thank you" in the thread...
Total downloads < v0.25b: 16360
ai nimerit-o!
it works! great! there are times when i really love the noobs!
congrats and kudos to all the ones that opened this road. another ****up of HTC cleared up!
Didn't work for me, but then I'm on Dutty 2.6 and I'm assuming the manila files are different.
I also had trouble getting the app to generate the manila files. I resized a pic, loaded it into the app and clicked create png. Then clicked compress. Although I had several CMD windows open/close and the app stated that it had created the manilas in the same directory as the source image, no manila files were actually created.
What I did to get output files was before clicking create png and compress, I changed the output directory from where the source file was located. Then, when I clicked compress, the CMD window froze open and I had to close it manually. Twice I did this, but the output files appeared in the directory I had specified. Odd, huh?
The file compression can take several minutes so please wait for the command windows to close. I have not done this asynchronously yet, so the main app freezes until the cfc app in the cmd window ends.
I'm having an odd issue with this app. When I click Compress, the CMD windows
comes up and disappears but the 2 manilla file's can't be seen.
Here's what it say's in the app:
Code:
Converting PNG -> QTC... Please wait...
Compressing QTC -> CFC... Please wait...
Padding file... Please wait...
Created C:\Documents and Settings\Dally\My Documents\HTC Touch HD Stuff\Wallpapers\70083a29_manila
Converting PNG -> QTC... Please wait...
Compressing QTC -> CFC... Please wait...
Padding file... Please wait...
Created C:\Documents and Settings\Dally\My Documents\HTC Touch HD Stuff\Wallpapers\77feee1d_manila
Weirdly enough, when I downloaded Rozenthal's example wallpapayer "BlackEarth" from the Tutorial thread, I could see the manilla file's in the .RAR archieve
but couldn't see them whe I extracted the files.
Hope someone can help
do not put yr original jpg file too deep into the directories tree (like hd\highres\test). the program can not handle it.
build a directory close to the root (like c:\test).
Sorry, I forgot to use " for files and folders with spaces... Try v0.2b
a picture worth....
here u have it, before (original jpg file) and after
after posting i realized that the differences are very hard to detect in the attached files. maybe if u'll download them...
anyway, the difference on the HD are striking!
I cant get it to work with the old manila(stock manila) when I copy manila files to windows dir - it doesnt overwrite anything.... -- disabled, reenabled manila- set to default =black screen for bckground..
is it something with background for all tabs( it is installed by default in kwbr latest rom)
Kristaps-K9-Lv said:
I cant get it to work with the old manila(stock manila) when I copy manila files to windows dir - it doesnt overwrite anything.... -- disabled, reenabled manila- set to default =black screen for bckground..
is it something with background for all tabs( it is installed by default in kwbr latest rom)
Click to expand...
Click to collapse
I'm having exactly the same problem. I'm using the an Original ROM and when I
copy over the 2 Manilla file's into the Windows DIR, nothing get's overwritten.
Also v0.2b solved my earlier problem
Thank you
I guess the files in original ROMs have different names.
If you want to find them, you have to copy *_manila files from the windows folder on your device, then use CFC GUI to find the ones that look like the default wallpaper (512 x 512 for the top slice and the bottom slice 512 x 256 which is black)
I can do what your sayin Maranell0, but how do I access the windows folder
of my device using ActiveSync?
It doesn't seem to let me do this.
Edit:
I can see the folder now, had to set show all folders in XP to access it
Now for some odd reason I can't seem to copy the neccessary manila file's to the
windows directory of my device.
Gives me a permission error everytime
I've tried doing this with XP as well but still no luck.
Total Commander isn't helping either.
EDIT:
I managed to copy both manila file's over but the wallpaper is still the stock one.
Here are the manila file's I think I had to replace
1ae0036d_manila - The bottom bit
7def6761_manila - The top bit
Here are the 2 file's in CFG GUI. I may have got the wrong file's but just wanted a confirmation. I couldn't find any other file's that could've
been the stock wallpaper.
Did you disable / enable TouchFLO in Today Settings?
The manila files in your ROM are not CFC compressed, try decompressing the files after creating them, so that you will have "AP" instead of "APC" to the right of each file.
maranell0 said:
Did you disable / enable TouchFLO in Today Settings?
The manila files in your ROM are not CFC compressed, try decompressing the files after creating them, so that you will have "AP" instead of "APC" to the right of each file.
Click to expand...
Click to collapse
Yeh mate I did disable and then enable TouchFLO.
I tried decompressing but all I can still see is the Stock Wallpaper
0.2 corrected my problem, thanks man.
I assume from the additional buttons that have appeared that some additional features are forthcoming? I await with keen interest.
One thing I did note; the resulting image is much darker than the source... intentional?
Major_Sarcasm said:
0.2 corrected my problem, thanks man.
I assume from the additional buttons that have appeared that some additional features are forthcoming? I await with keen interest.
One thing I did note; the resulting image is much darker than the source... intentional?
Click to expand...
Click to collapse
The image is slightly darker, it's the way it's being displayed by Manila.
I'm working on additional features, but I'm still learning c#...
I've tried everything now but just can't get these wallpapers to work
I think I may have got the top part of the manila wallpaper file wrong
but just can't figure out which one it could be.
i cant copy that manila files to the windows directory. it gives me a permission errors... any ideas?
Saaw said:
i cant copy that manila files to the windows directory. it gives me a permission errors... any ideas?
Click to expand...
Click to collapse
those are sys files. use resco explorer.
01/04/2010 update - program can read list of modules from text file.
download link: http://www.4shared.com/file/255038195/c2b5de9b/RecModFolder_04.html
mirror: http://narod.ru/disk/19297102000/RecModFolder_04.zip.html
how to use
1. create text file RecModFolder.txt,
2. write list of modules to this file, for example:
SYS\MediaOS\wmpocx.dll
SYS\OS\dw.exe
SYS\OS\dwui.dll
SYS\OS\DwXfer.dll
3. pass RecModFolder.txt as a parameter:
RecModFolder.exe RecModFolder.txt
that's it.
and, of course, you can convert all modules in folder like this
RecModFolder.exe SYS\AdobeFlash
RecModFolder.exe SYS\AdobeFlashCodecs
there are sample RecModFolder.txt and cmd file that I use with OSBuilder
cmd file is executed from the root of my kitchen, program is in the tools\RecMod subfolder
====================================================
old post:
I developed small tool which helps me to update my kitchen with new OS build.
My device has wm6.1 kernel and I get tired with "too many modules" problem.
I know I can use RecMod to convert modules to files, but it's so slow and inconvenient:
find folder with module,
drop it on recmod.exe,
get new file out of this folder,
delete folder,
move file back,
find, drop, get, delete, move...
find, drop, get, delete, move...
GRRR!!!! =)
My tool will do all these steps for me.
I just select parameters:
1. Folder - folder with modules, for example SYS\21872,
2. Mask (optional) - any mask that is valid in windows is acceptable,
(common masks are *.dll, *.cpl, *.exe, *.mui), no mask means "*".
3. Count (optional) - how many modules to convert, no count means "convert all".
[new in v0.3] If Count is 0, program will only display all modules matching the mask,
and do not change your files.
=======================================
Example 1:
>RecModFolder.exe c:\xda\v1\SYS\21054
means - RecMod all modules in c:\xda\v1\SYS\21054 recursive
=======================================
Example 2:
>RecModFolder.exe c:\xda\v1\SYS\21054 *.exe
means - RecMod all exe modules in c:\xda\v1\SYS\21054 recursive
=======================================
Example 3:
>RecModFolder.exe c:\xda\v1\SYS\21054 *.dll 10
means - RecMod first 10 dll modules in c:\xda\v1\SYS\21054 recursive
=======================================
Algorithm
Code:
read parameters from command line
find all modules in given folder (recursive) using given mask
for each module folder
{
call RecMod
create temporary unique file name (GUID for safety reason)
move new file to parent folder and assign it temporary name
delete module folder (with all files)
rename new file, give it real module name
if (count >= requested count)
{
stop
}
}
=======================================
Installation
make sure you can run RecMod from console, add its folder to PATH or drop RecModFolder.exe to the same folder.
That's it.
=======================================
Tips
You can create shortcut to RecModFolder and drop folders on it from explorer or Total Commander. RecModFolder will convert all modules in that folder to files.
Backup your files. This tool doesn't ask any questions,
it just informs you in case of error and stops immediately.
Save log file and check it for errors.
This is console application - you can use it in bat files.
You can save output of this program to text file - add >fileName.txt to your command line.
example:
RecModFolder.exe c:\xda\v1\SYS\21054 *.dll 10 >log.txt
this command will call RecMod first 10 dll modules in c:\xda\v1\SYS\21054 recursive
and save its output to log.txt.
Do not open folders you want to delete (replace with files) in explorer (or Total Commander, FAR, etc.) while this program works.
very nice, but there is already a similar app which does it from right click menu..
see here -> recmod by OndraSter
you probably have more options on the whole process, but the other tool might be more convenient.. anyways i will try
serfer222, you know that you may be responsible for whole lots of nab made VERY bad rom releases now, lol?
hheh, thanks for that tool anyway.
nosedive said:
very nice, but there is already a similar app which does it from right click menu..
see here -> recmod by OndraSter
you probably have more options on the whole process, but the other tool might be more convenient.. anyways i will try
Click to expand...
Click to collapse
I can explain what is the main difference:
If I choose one module folder, for example
Code:
SYS\21055\SHARED\COMMON\BROWSING\browser.dll\
and select osRecmod "Recmod this folder" it will work.
but if I select parent folder
Code:
SYS\21055\SHARED\COMMON\BROWSING\
osRecmod will just delete this folder and create empty file BROWSING
in the SYS\21055\SHARED\COMMON\
So, you see, it doesn't work for me.
I want to convert all modules inside folder
Code:
SYS\21055\SHARED\COMMON\BROWSING\
in one step. I drag this folder on my tool and all modules are converted to files. That's what I want =)
pupakota said:
serfer222, you know that you may be responsible for whole lots of nab made VERY bad rom releases now, lol?
Click to expand...
Click to collapse
You know, there are a lot of such rom developers already here.
This tool will just save their time and maybe they will find out whole new world outside computer and then will quit rom development... =)
Thank you serfer222 for this application, which complements my kitchen.
By
New version - v0.3.
new option is added - if you set Count to 0 program will just display list of matching modules.
Example: I want to see a list of *.mui module folders that can be converted to files.
Command: >RecModFolder.exe d:\mega2\SYS\21874\ *.mui 0
Output:
Code:
d:\mega2\SYS\21874\SHARED\0409\AdobeFlash_LANG_0409\flashresource.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Autoupdate_Lang_0409\AutoUpdateRes_wpc.exe.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Base_Lang_0409\commctrl.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Base_Lang_0409\commdlg.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Base_Lang_0409\coredll.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Base_Lang_0409\coreres.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Base_Lang_0409\crypt32.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Base_Lang_0409\fatutil.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Base_Lang_0409\filesys.exe.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Base_Lang_0409\gwes.exe.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Base_Lang_0409\ieceext.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Base_Lang_0409\jscript.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Base_Lang_0409\miscres.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Base_Lang_0409\netmui.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Base_Lang_0409\notify.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Base_Lang_0409\OutlookLiveUpdaterResources.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Base_Lang_0409\outres.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Base_Lang_0409\quartz.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Base_Lang_0409\shellres.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Base_Lang_0409\shellresapps.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Base_Lang_0409\syncres.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Base_Lang_0409\tapres.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Base_Lang_0409\tshres.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Base_Lang_0409\unimodem.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Base_Lang_0409\waveapi.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Base_Lang_0409\wsp.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Browsing_Lang_0409\browsres.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Browsing_Lang_0409\mlang.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Browsing_Lang_0409\shdoclc.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Browsing_Lang_0409\shlwapi.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Browsing_Lang_0409\urlmon.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Browsing_Lang_0409\wininet.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\CHome_Lang_0409\cmhomeres.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Entertainment_Lang_0409\bbcbres.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Fwupdate_Lang_0409\MdsRes_wpc.exe.0409.mui
d:\mega2\SYS\21874\SHARED\0409\IPSECVPN_Lang_0409\ipsecvpnres.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\Skybox_Lang_0409\MyPhoneConsole.exe.0409.mui
d:\mega2\SYS\21874\SHARED\0409\WMWidgets_LANG_0409\riahostres.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0409\WMWidgets_LANG_0409\wmwidgetinstallerres.dll.0409.mui
d:\mega2\SYS\21874\SHARED\0419\AdobeFlash_LANG_0419\flashresource.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Autoupdate_Lang_0419\AutoUpdateRes_wpc.exe.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Base_Lang_0419\commctrl.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Base_Lang_0419\commdlg.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Base_Lang_0419\coredll.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Base_Lang_0419\coreres.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Base_Lang_0419\crypt32.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Base_Lang_0419\fatutil.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Base_Lang_0419\filesys.exe.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Base_Lang_0419\gwes.exe.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Base_Lang_0419\ieceext.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Base_Lang_0419\jscript.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Base_Lang_0419\miscres.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Base_Lang_0419\netmui.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Base_Lang_0419\notify.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Base_Lang_0419\OutlookLiveUpdaterResources.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Base_Lang_0419\outres.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Base_Lang_0419\quartz.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Base_Lang_0419\riresdll.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Base_Lang_0419\shellres.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Base_Lang_0419\shellresapps.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Base_Lang_0419\syncres.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Base_Lang_0419\tapres.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Base_Lang_0419\tshres.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Base_Lang_0419\unimodem.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Base_Lang_0419\waveapi.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Base_Lang_0419\wsp.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Browsing_Lang_0419\browsres.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Browsing_Lang_0419\mlang.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Browsing_Lang_0419\msscript.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Browsing_Lang_0419\shdoclc.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Browsing_Lang_0419\shlwapi.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Browsing_Lang_0419\urlmon.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Browsing_Lang_0419\wininet.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\CHome_Lang_0419\cmhomeres.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Entertainment_Lang_0419\bbcbres.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Fwupdate_Lang_0419\MdsRes_wpc.exe.0419.mui
d:\mega2\SYS\21874\SHARED\0419\IPSECVPN_Lang_0419\ipsecvpnres.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\MediaOS_Lang_0419\wmploc.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\RemoteDesktopMobile_Lang_0419\wpctsc.exe.0419.mui
d:\mega2\SYS\21874\SHARED\0419\Skybox_Lang_0419\MyPhoneConsole.exe.0419.mui
d:\mega2\SYS\21874\SHARED\0419\WindowsLive_Lang_0419\WLMContactsResources.dll.0419.MUI
d:\mega2\SYS\21874\SHARED\0419\WindowsLive_Lang_0419\WLMDeckResources.dll.0419.MUI
d:\mega2\SYS\21874\SHARED\0419\WindowsLive_Lang_0419\WLMHSContainerResources.dll.0419.MUI
d:\mega2\SYS\21874\SHARED\0419\WindowsLive_Lang_0419\WLMHSMailResources.dll.0419.MUI
d:\mega2\SYS\21874\SHARED\0419\WindowsLive_Lang_0419\WLMHSMeResources.dll.0419.MUI
d:\mega2\SYS\21874\SHARED\0419\WindowsLive_Lang_0419\WLMHSMessengerResources.dll.0419.MUI
d:\mega2\SYS\21874\SHARED\0419\WindowsLive_Lang_0419\WLMHSSearchBarResources.dll.0419.MUI
d:\mega2\SYS\21874\SHARED\0419\WindowsLive_Lang_0419\WLMHSSplashResources.dll.0419.MUI
d:\mega2\SYS\21874\SHARED\0419\WindowsLive_Lang_0419\WLMHSSyncResources.dll.0419.MUI
d:\mega2\SYS\21874\SHARED\0419\WindowsLive_Lang_0419\WLMMailResources.dll.0419.MUI
d:\mega2\SYS\21874\SHARED\0419\WindowsLive_Lang_0419\WLMMessengerResources.dll.0419.MUI
d:\mega2\SYS\21874\SHARED\0419\WindowsLive_Lang_0419\WLMServiceResources.dll.0419.MUI
d:\mega2\SYS\21874\SHARED\0419\WindowsLive_Lang_0419\WLMSharedResources.dll.0419.MUI
d:\mega2\SYS\21874\SHARED\0419\WindowsLive_Lang_0419\WLMSpacesResources.dll.0419.MUI
d:\mega2\SYS\21874\SHARED\0419\WindowsLive_Lang_0419\WLMSyncResources.dll.0419.MUI
d:\mega2\SYS\21874\SHARED\0419\WMWidgets_LANG_0419\riahostres.dll.0419.mui
d:\mega2\SYS\21874\SHARED\0419\WMWidgets_LANG_0419\wmwidgetinstallerres.dll.0419.mui
97 modules found.
download it from the first post.
have fun =)
keep on
good job man
I have an idea for next update.
Now I'm using 21874 with my wm6.1 kernel and just simple update it to 21876 is a headache. This tool helps me to convert modules fast, but I still must choose what should be converted. I'm lazyyyy. I did it for 21874 and want to REUSE my old work.
Idea is:
1. run application and choose good existing build AS TEMPLATE.
2. select new build folder and drink a cup of coffee.
3. my app will do the job - take old working build as template and prepare new build exactly the same way.
What do you think? Is there a program that already implement this feature or
I need to create it? (lazy question)
=)
When I start doing recmod the recmodefolder.exe shows this message "Do you have RecMod.exe in PATH?" and then stops.
What happens?
program is updated, list-mode added,
first post is updated
hi, friends, it seems an excerllent apps, but how can i download it? when i visit that link, it seems a Russian web, i even don't know one letter!
can you upload it rapishare ?
www.4shared.com link in the first post
useful App ,, Thanks
when selecting or specifying 1 module folder, it doesen't work for me.
It shows "RecMod 0 modules completed"
It works only using multiple (eg: *.mui).
Maybe the first prob. will be replaced by osrecmod, & ur tool for multiple files ,, LoL
------------
ANY idea of converting back file to module?
-Yasser-
MUI Folders Cleaner - this simple batch file removes all unneeded resources in the MUI folders, in this case it deletes all 96DPI folders, all 128DPI folders, and all resolutions but 800x480. With notepad and a few seconds of your time you can adjust it to delete/leave anything you want. Just put every MUI in a 4-characters hex folder name (like 0409, 0410, etc.) and the tool will do the rest.
HTC RUUs InitFlashFiles.dat extractor - this tool instead takes RUU EXE Updaters (put them in the RUUs folder), unpacks them, dumps the imgfs and gets all the initflashfiles (saved in the Output\RUUs folder). You can of course edit this script too to extract any other file you want.
HTC LEO (1.48) initflashfiles collection - this archive contains all the localized initflashfiles from all the HTC LEO roms I could get, if some are missing please tell me where to download the ruu updater for the language and I'll update the archive