Hi there,
In Midget's Vanilla Crossbow ROM there are only three buttons to set in "Settings - Buttons", which are Contacts, Camera and Speech. I am missing others like PIE and the bulb button.
Is this right? Is this a known issue in Midget's ROM and is there a solution?
Thanks again folks!
here is the solution:
I found this some time ago and it works:
....
add the following key to the registry:
HKLM\SOFTWARE\Microsoft\Shell\Keys\40C8
and create values just like another key (i.e. 40C5)
soft-reset and then you are able to program the button.
Can anyone expand to his instructions please. Did anyone tried to remap their backlight button yet?
I just tried and it works. Copy the complete key for 40C5 and call it 40C8. Choose a different name for the button (e.g. 'Button Light').
40C1-Contacts
40C2-Video Telephony
40C3-Camera
40C4-Voice Recorder
40C5-Speed Dial
40C6-Volume Up
40C7-Volume Down
40C8-Backlight (now added)
40C9-Calendar
That helped!! Thanks!!
It says acces denied when i try to create a new key.
I did it with Total Commander but any Regedit should do!
calvin42, thank you for this information!
I tried all this keys and it works except for:
* "Volume Up" / "Volume Down" do not work;
* I have no "Calendar" key, where is it?
* I do not know how to set proper icons for keys, can anyone with "normal" firmware save and post "HKLM\SOFTWARE\Microsoft\Shell\Keys" for us?
calvin42 said:
here is the solution:
I found this some time ago and it works:
....
add the following key to the registry:
HKLM\SOFTWARE\Microsoft\Shell\Keys\40C8
and create values just like another key (i.e. 40C5)
soft-reset and then you are able to program the button.
Can anyone expand to his instructions please. Did anyone tried to remap their backlight button yet?
I just tried and it works. Copy the complete key for 40C5 and call it 40C8. Choose a different name for the button (e.g. 'Button Light').
40C1-Contacts
40C2-Video Telephony
40C3-Camera
40C4-Voice Recorder
40C5-Speed Dial
40C6-Volume Up
40C7-Volume Down
40C8-Backlight (now added)
40C9-Calendar
Click to expand...
Click to collapse
Dumb question time
40C4-Voice Recorder
40C5-Speed Dial
These are both to the same key, the one next to the camera button yes?
If so, why can't I get a push and hold to work, I only get the value in 40C4 to work?
Wow...Dead thread? Is there no solution to this?
I'm looking for the code, dll, or application location that locks the keypad on wm phones. I'm looking to map one of my keys to lock the keypad whenever pressed. I thought the lock functionality on wm phones was an application but tons of searching turned nothing up.
Specifically, I have a t-mobile dash (htc s620) and want to map my t-zones key to lock my phone by editing the \Windows\short_IE.lnk file which controls the key's mapping
lock app
im looking for that too did you find it?
the closest i got was this:
http://forum.xda-developers.com/showthread.php?t=446689
keep looking
Function said:
I'm looking for the code, dll, or application location that locks the keypad on wm phones. I'm looking to map one of my keys to lock the keypad whenever pressed. I thought the lock functionality on wm phones was an application but tons of searching turned nothing up.
Specifically, I have a t-mobile dash (htc s620) and want to map my t-zones key to lock my phone by editing the \Windows\short_IE.lnk file which controls the key's mapping
Click to expand...
Click to collapse
Hey, you can use the star key and it will lock your phone. Also holding the end call key will lock your phone. Additionally if you want to download the new 3volution ROM by Ookba on the Dash/Excalibur forum it comes with a built in keylock that locks the keypad after 10 seconds of inactivity. If you come post over in the Dash forum I'll hunt you down an app to solve whatever problem you have.
I figured out how to do this:
1) Find the DeviceLock.exe in windows/
2) Tap and hold on the EXE file, and select Copy from the context menu that popped up.
3) Navigate to Windows\Start Menu and you will see your current start menu programs in that folder. Scroll all the way to the bottom of the list and tap and hold in white space (a blank part of the screen below all other programs), then choose Paste Shortcut. This will place a shortcut in your start menu. You can then rename the shortcut to whatever you choose.
Then you can go an modify the button mappings in settings and select the new shortcut you created in the start menu and you're done.
goosed said:
I figured out how to do this:
1) Find the DeviceLock.exe in windows/
2) Tap and hold on the EXE file, and select Copy from the context menu that popped up.
3) Navigate to Windows\Start Menu and you will see your current start menu programs in that folder. Scroll all the way to the bottom of the list and tap and hold in white space (a blank part of the screen below all other programs), then choose Paste Shortcut. This will place a shortcut in your start menu. You can then rename the shortcut to whatever you choose.
Then you can go an modify the button mappings in settings and select the new shortcut you created in the start menu and you're done.
Click to expand...
Click to collapse
In WM6.0 Pro I didn't had the DeviceLock.exe on windows folder. so I had to use the cab above.
Still I don't get it why in a Samsung Omnia with WM6.1 you can lock the keyboard by pressing for 2 seconds the end call button and on HTC P3600 with WM6.0 the end call button doesn't do that.
Is it possible to assign to xpanel button switching between programs? i don't use this button and this option would be great for it i think.
p.s
don't redirect me to thread where is written how to assign exe to xpanel button
Hah found how to do it I will write tutorial maybe someone need it.
1. We need software called AltTab.exe
Download and put in Windows directory
2. Take any registry editor and go to ( thanks to jackleung )
HKLM\Software\SonyEricsson\PanelManager\ApplicationName
and Change it to \..\Windows\AltTab.exe
3. Nothing more now xpanel button switches between running programs
amazing.
Will test this now.
hi,
i've been lookong for this so long. thanks!
unfortunately reg hack does not work here for the X button assignment (energy rom with new panel manager installed). any tip? or i have to reset my systm...
rosz said:
hi,
i've been lookong for this so long. thanks!
unfortunately reg hack does not work here for the X button assignment (energy rom with new panel manager installed). any tip? or i have to reset my systm...
Click to expand...
Click to collapse
yes, you have to reset your system, but NOT the "hard" way...
go to \windows\startup and delete the panelmanager.lnk in there. do a softreset. now change the reg-key like mentioned above. do NOT press the x-panel-key!!! (you can use any program-file, i use it for starting comm-manager)
one more softreset and you're done.
the reason for this is:
if you press the panel-key the first time after flashing a rom, a .lnk get's put into the startup-folder, starting panelmanager with every boot and overwriting any changes to the reg-key you may have made. (kinda like autostart on your pc)
Inspired!
Not only got rid of the panel manager, but can also cycle through open apps.
However... it seems to cycle through just 2 apps. If 3 or more applications are open, it will just cycle through the last 2.
I followed the instructions as above - maybe there is another tweak?
Try installing TaskFacade and assigning the X-button to it. Really nice program, all cred goes to GPS-lover.
http://forum.xda-developers.com/showthread.php?t=420220
Use the fist state on the camera button instead. That isn't used for anything anyway. Assign alttab.exe with AE Button Plus. I use it with double tap on the button so I don't press it by mistake. When entering the xperia camera it works as usual. So you don't need to worry about that.
paul c said:
Inspired!
Not only got rid of the panel manager, but can also cycle through open apps.
However... it seems to cycle through just 2 apps. If 3 or more applications are open, it will just cycle through the last 2.
I followed the instructions as above - maybe there is another tweak?
Click to expand...
Click to collapse
If you press Xpanel button fast it will switch between other apps.
I loved TaskFacade
If you want to assign TaskFacade to Xpanel - you just write \TaskFacade\TaskFacade.exe
fantastic, thanks a lot to vladimired and caliban2! Now I can finally switch between programs (and also turn to the today screen) with the X-Panel button and close programs quickly with the OK button.
For this I do not use TaskFascade. I prefer the app switcher from Spb Pocket Plus. If you use this program, just copy the AltTab.exe in the folder ...\programs\PocketPlus into the windows folder like mentioned above. The rest is similar.
Im kinda lost, can you post clearer instructions on how to do this with the tab.exe and taskfacacde, thanx
Here is video how everything works with TaskFacade
http://www.youtube.com/watch?v=bw1dIW-YBLA
i will write more detailed manual lately today, if my work will not swallow me
TaskFacade its the best aplication i have in my x1a thanx
TaskFacade is a very nice app, but it does take some time for the images of the open applications to appear.
I'm after speed... compared to TaskFacade, it's faster to go to the Manila home page and click on the "OK" button area, and then switch as necessary.
That was the benefit of AltTab... but it'll only cycle through 2 open applications
I've installed Ae Buttons but i don't figure what button from the menu is the X Panel button? Any ideea?
I want the x panel button to open the panel manager when pressed short, and another program when pressed long.
Cheers!
Edit: I found this: Press File->Add button and press the button. The X-Panel button code: #00EA. Now i try to make it work on long press
Later Edit: Done. If you select from the drop down menu and chose "4.Long press" you can choose an action. I thought that if i select "4.Long press" , the "1.Single press" will become inactive, but i was wrong. Now my Xperia is Perfect
Hi all,
i'd like to inform You about small application that could be useful with changing mapped x-panel button:
RWA - Run With Argument - 1.0
small application that allows to run any other *.exe file with arguments...for some reasons it can be useful especially when working on HTC devices...
so we bind XPanel to RWA, and in RWA for ex. tmail.exe with SMS argument... to we get SMS Inbox under XPanel Button
and that's all... maybe somebody could find it as an useful application ...
XDA Thread Link
thank you!!
thanks to vladimired for this trick, very usefull
i set XPanel Button with TaskFacade (that looks like a Panel Manager ) and it works fine
ok, i'm not getting a response in q&a, so, sorry if this is in the wrong section...
anyone know if it's possible to assign a shortcut to the softkey action
(ie. the softkeys are different in word to those on the today screen, can i assign a shortcut to that action)
i use a bluetooth keyboard which can be configured to any shortcut. it would be real handy to be able to just hit a couple of keys rather than reach for the devices tiny screen everytime i want to activate the menu.
cheers
or even just to have the pop up menu in word would be real handy
cheers
anyone!???