Develop Bugs

History Recall/Redial WM6

Hi,
I installed the LVSW (Pro Style) ROM, and when I press the Dial button (green) - it goes into phone mode, great.
Now.
If I were to press the button again (to dial the last dialed number) then it doesnt work.
also if I press the joystick UP it doesn't go to history - like it used to with the original ROM.
any ideas on how to fix this?
thank you.

romka said:
Hi,
I installed the LVSW (Pro Style) ROM, and when I press the Dial button (green) - it goes into phone mode, great.
Now.
If I were to press the button again (to dial the last dialed number) then it doesnt work.
also if I press the joystick UP it doesn't go to history - like it used to with the original ROM.
any ideas on how to fix this?
thank you.
Click to expand...
Click to collapse
I've been asking the same question without any fixes. Not sure how to do it. There was a utility called "Smartskey" used in WM5. But I am not 100% certain that was employed in some of the WM5 cooked ROMS (Can someone confirm this??). I thought it was built into the functionality of the Hermes. I would love to have this functionality again.

anubus12 said:
I've been asking the same question without any fixes. Not sure how to do it. There was a utility called "Smartskey" used in WM5. But I am not 100% certain that was employed in some of the WM5 cooked ROMS (Can someone confirm this??). I thought it was built into the functionality of the Hermes. I would love to have this functionality again.
Click to expand...
Click to collapse
Either use the WM5 dialler (just change to a WM5 dialler skin as described 200 times already) or simply notice that call history and speed-dials are already in the shortlist above the keypad with the WM6 dialler (unless you;ve changed settings in phone.).

I notice the same in all WM6 and it is a pain in the ass too. But the WM5 dialer did NOT work for me, I use a WM 5 dialer since it looks better but still no fix. I agree and have come accustomed to using the history and speeddial list a lot more.

wpbear said:
I notice the same in all WM6 and it is a pain in the ass too. But the WM5 dialer did NOT work for me, I use a WM 5 dialer since it looks better but still no fix. I agree and have come accustomed to using the history and speeddial list a lot more.
Click to expand...
Click to collapse
I agree it's a pain. Can someone please fix this? Or do we have to install smartskey?

Anyone noticed that the latest Black v2.0 reverts back to the older style that we are looking for? Anyone know how this was done? Is it a new dialer or even an old WM5 dialer? The reason I would like to know is because other ROMs don't have this feature. I would like to install it manually on those ROMs.
I love the functionality of pushing the up directional button to get to history and not to scroll through smartdial.

romka said:
If I were to press the button again (to dial the last dialed number) then it doesnt work.
also if I press the joystick UP it doesn't go to history - like it used to with the original ROM.
any ideas on how to fix this?
thank you.
Click to expand...
Click to collapse
EDIT Registry::
HKLM\Security\Phone\Skin
Enabled = 1
.
.
.
Is this OK?

romka said:
I installed the LVSW (Pro Style) ROM, and when I press the Dial button (green) - it goes into phone mode, great.
Now.
If I were to press the button again (to dial the last dialed number) then it doesnt work.
also if I press the joystick UP it doesn't go to history - like it used to with the original ROM.
any ideas on how to fix this?
Click to expand...
Click to collapse
Start -> Settings -> System (tab) -> TweakUI. Make sure that "Enable VideoCall" is selected (checked). Restart your device. You now have a WM5-like smart dialer with the features you want enabled. Up or Right for call history, Down or Left for Speed Dial entries.
John

install HTC_smartdialer2.5 and any wm5 dial skin and you will get the speed dial and history functions back. Can't remember were I found it sorry.

johnburn said:
Start -> Settings -> System (tab) -> TweakUI. Make sure that "Enable VideoCall" is selected (checked). Restart your device. You now have a WM5-like smart dialer with the features you want enabled. Up or Right for call history, Down or Left for Speed Dial entries.
John
Click to expand...
Click to collapse
I don't have TweakUI on Black 2.5. Where do I get that?

[APP] LockMeLite (another screen lock app) :-) (1.3 RELEASED!!!)

Hi to all!
After trying almost every app that locks the screen and keys so it can prevent accidentally pressing the answering key or reject or both :-D i decide to build my own (had a little extra time).
This is a specially light release for HTC Diamond, HD, Touch Pro (v1.0 and v1.1 tested by me)
WHAT IT CAN DO:
The only thing that it can do is lock the buttons and screen when you switch on your phone or an incoming call has arrived.
USAGE:
To unlock just slide down a 45% (could be a user define value... later) of the screen and..... that's it!
SETUP:
No setup (yet) just create a folder in your \Program Files (ex. \Program Files\LockMeLite) and after you download the .zip file extract it and copy the LockMeLite.exe and the CloseLmL.exe to the folder you've just create.
Execute it and your good to go.
EXIT:
Want to exit the application?
v1.0 just tap 3 times on the screen and a message will appear.
v1.1 just execute CloseLmL and select 'Yes' on the message.
REBOOT:
After a reboot you must manually start the application again.
RUNTIME:
Requires .NET Compact Framework 3.5
This is the required runtime library from MS. If you don't have it.
If you are having problem downloading this try to right click on the link and choose "Save link as..."
After downloading copy the file to your mobile and execute it.
DOWNLOAD APP:
LockMeLite v1.0
v1.0 features:
Displays the time
******************************************
No Setup (plain copy)
LockMeLite v1.1
Setup (Special thanks to nitroblu)
geoks100 LockMeLite v1.1.cab
geoks100 LockMeLite v1.1 (autostart).cab
v1.1 features:
Show unread sms/mms count!
Show missed calls!
Show incoming caller name/number!
Displays signal bars!
New application included. CloseLmL
Just execute CloseLmL and select 'Yes' from the message box and the next time you turn your device on, LmL will not be there!
******************************************
No Setup (plain copy)
LockMeLite v1.2
v1.2 features:
Display background image!
How? just copy in LmL folder a jpeg image with filename lmlback.jpg and when the LockMeLite.exe starts the image will be used as background
Keep unlock while talking (stop annoying lock while talking on the phone)!
*******************************************
No Setup (plain copy)
LockMeLite v1.3
v1.3 features:
Unread e-mails
Voice mail count
Auto unlock screen on incoming call, keep keys locked
User define unlock percentage
User define background image (using various filenames)
User interface for settings
-Unlock on incoming
-Unlock percentage
-Background image selection
Note1: In order for user changes to take effect you must restart LmL.
Note2: In order to restart LmL execute CloseLmL select Yes and switch device (suspend) off/on
*******************************************
*USER REQUESTS*
v1.1 1. Missed calls
v1.1 2. Unread SMS
v1.1 3. Incoming caller
v1.2 4. Keep unlock while talking on the phone
v1.2 5. User define background image
v1.3 6. Unread e-mails
v1.3 7. Voice mail count
v1.3 8. Auto unlock screen on incoming call, keep keys locked
v1.3 9. User interface for settings
v1.3 10. User define unlock percentage
vX.X 11. Battery meter indicator
vX.X 12. Transparent background
vX.X 13. Switch off screen after user specified time if locked
vX.X 14. 12h clock
vX.X 15. User define on-screen graphics/notifications
vX.X 16. User define font and color for on-screen notifications
vX.X 17. MSN notification
vX.X 18. Vibration on unlock
vX.X 19. Enable headset answer without unlock
vX.X 20. Multiple language support
vX.X 21. Display date
Comments, requests are welcome.
Thank you!
PS. This app is just one of many releases i have build so far with extra features including missed calls
and sms notification on screen and also incoming caller display and more....
This one was just a "last night release"
I hope you enjoy it. Its free after all
PS1. After getting a message for a kind donation i include the button on the bottom.
PS2. Any donation, small or large, helps this project continues. Thanks again !

Hi geoks100
Great application. Looks and feel super. The only features i miss is to display missed calls and sms notification on screen and also incoming caller display. You writes that you already made these features.
Can I have for try a new version?
Do not forget. Keep so simple and small the program.
Thanks a lot
wyro
PS: Sorry for my bad English. I hope you understand it nevertheless.

great application .. really love it.
could you add battery meter and missed phones ... sms ...
maybe as an add on .
but a must is incoming caller . also on icoming calls the bottom bar is flickering ... the one where the keyboard icon sits .
i mean really keep it simple and fast .

berkut_g said:
great application .. really love it.
....
also on icoming calls the bottom bar is flickering ... the one where the keyboard icon sits .
i mean really keep it simple and fast .
Click to expand...
Click to collapse
Yes i know it's the phones app that is trying to come in front.
I will leave this "bug" for later release
I'm trying to keep it simple and fast.

this is exactly what i like about this app , simple and fast .
but i would really like to know how's calling me
just name and number ... for eg . simple , elegant .
must think of a way (clever way) to answer the phone safely . it happens often to me to reject an incoming call or answer by mistake when i pull it out of the jacket or pants (don't think dirty , ok ! )

Very nice app

berkut_g said:
...
must think of a way (clever way) to answer the phone safely . it happens often to me to reject an incoming call or answer by mistake when i pull it out of the jacket or pants (don't think dirty , ok ! )
Click to expand...
Click to collapse
So when you pull it out of you jacke or pants (i don't think dirty) you slide the 45% and also answer/reject the call ???? Men you have some clever jacket/pants
If the slide would be not from top to bottom but bottom to top ?? (if i get you correctly) or you just slide it in your pocket upside down.

yup , something like that ... any way really good job.

thanks for sharing

missile2004 said:
thanks for sharing
Click to expand...
Click to collapse
Thanks for using it
Keep watching this thread, more to come

great work,thanks

Great Program.
Can you make the backgroud transparent? Would be better for incoming calls.
And an option to toggle off the 3 taps to end the program. Or make more taps cause if I pull it out of my pocket I happens that I tap the touchdisplay.
Keep this program so small as you can and it would be the best locking program ever I think.

I'm trying to download this app, but its giving me erro that i need to have the latest .net... can you all guys help on how to get the latest .net..
Thanks in advance....

Popi21 said:
I'm trying to download this app, but its giving me erro that i need to have the latest .net... can you all guys help on how to get the latest .net..
Thanks in advance....
Click to expand...
Click to collapse
http://www.microsoft.com/downloads

thanks.. ill try to download it...

Atze001 said:
Great Program.
Can you make the backgroud transparent? Would be better for incoming calls.
And an option to toggle off the 3 taps to end the program. Or make more taps cause if I pull it out of my pocket I happens that I tap the touchdisplay.
Keep this program so small as you can and it would be the best locking program ever I think.
Click to expand...
Click to collapse
I know what you mean about the 3 taps because i'm using it also.
Variant solutions comes in my mind...

Popi21 said:
I'm trying to download this app, but its giving me erro that i need to have the latest .net... can you all guys help on how to get the latest .net..
Thanks in advance....
Click to expand...
Click to collapse
Until i upload the .NET Compact Framework 3.5 runtime try to download it from MS
You must install first this on your pc and then get the appropriate .cab (ex wm,ppc,wce) from the install directory and install it on your device.

May we see some screen shots?
thanks

it's really simple ... black screen , clock on top . when you slide your finger down a % appears . when go over 45% it turns green and when you lift your finger the screen is unlocked.
simple and luvely.

Hi,
installed the app and it works very well on power off/on. - very nice and simple.
Then I had an incoming call while it was off and the screen didnt come up locked - it was straight into the answer ignore screen and unlocked ?
Jim

Phone Screen??

Anyone know how to open the phone screen without pressing the talk/send button? I cannot find a way like you can on the Wing. I am unable to push the hardware buttons due to my severe physical disability (Spinal Muscular Atrophy). Thanks in advance for any help!

bingman9517 said:
Anyone know how to open the phone screen without pressing the talk/send button? I cannot find a way like you can on the Wing. I am unable to push the hardware buttons due to my severe physical disability (Spinal Muscular Atrophy). Thanks in advance for any help!
Click to expand...
Click to collapse
I've never had a problem opening the screen. I usually slide it open using two hands, both thumbs on the edge of the phone. My thumbs go to the center, so I never press the phone button. That's my personal experience.
I never use that tilt-up screen on it, lol. I have no need for that tilt thing.

perhaps your operator can supply you with a special dialling wand?

krisez said:
perhaps your operator can supply you with a special dialling wand?
Click to expand...
Click to collapse
Oh, he's cool. Yea, he's a true badass. How hilarious.

Maybe someone could create an app? Something I can add to Start menu or Programs tab.
Sliding the phone open is not an option. It has to be touch activation.
On the Wing "phone" was a program in the start menu that brought up the dialing pad.

bingman9517 said:
Maybe someone could create an app? Something I can add to Start menu or Programs tab.
Sliding the phone open is not an option. It has to be touch activation.
On the Wing "phone" was a program in the start menu that brought up the dialing pad.
Click to expand...
Click to collapse
Ohhh, I thought you meant slide the screen open, lol.
Hmm, they don't have a shortcut for the phone, anywhere. But, it should be possible to create a shortcut. Lemme visit the file exporer for a few minutes...

You can add Phone to the start menu...

SOLUTION
Create a shortcut:
Go to the File Explorer
Navigate to the \Windows directory on your Device Memory
Scroll down to the file name, "cprog" (use the scrollbar, since kinetic scrolling is too slow)
Right click it, and click copy
Now scroll to the top of that list (use the scrollbar again)
Open the Start Menu folder (your filepath should be \Windows\Start Menu now)
Right click in the empty space, and then click "Paste Shortcut"
Now right click the "Shortcut to cprog" file, and click Rename, so that you can give it a more personable title
Now it's in your Start Menu! You can also add it to your Programs tab on TouchFlo.
Only problem is that there's no icon, but it works, right! (I'll read what was just posted...Beat you to the answer, Leanne, lol)

THANK YOU! Thanks for the solution, worked perfectly. I love my TP2 even more now!

[REQ] use g sensor to enable landscape in HTC Messaging

I use htc messaging for sms and i would to rotate automaticly in landscape with the g sensor.
the problem is if I use app to autorotate with g sensor (flip it, changescreen, gyrator....), it rotate also the home screen and all the manila because it has the same windows name (Manila).
so is there a solution to rotate only the htc messaging, renaming its windows for example or other solutions?
it would be very useful for me because i like to have the landscape keyboard when writing sms.
thanks

If you go to your Message-Tab and select New Message, the process will have another name. if you add this to changescreen it will allow you to write textmessages in landscape.
but if you choose reply it will be the manila one which will not be rotatet. so everytime you write a message you have to choose it as new message. thats the way i did it. runs like a charm now on my touch hd with htc messaging. still annoying that it wouldnt rotate when you choose reply, but at least i can write in landscape.
i solved it with changescreen. it will show you the appname while you are about to write a new message.
hope it works for you to.

ok thanks, but it's really annoying because i like to see the sms in wich I reply, I want use the threaded mode that allow the htc messaging app.
anyone for another solution?

unfortunately, there's no solution for that at this point.

GSen
i use the application GSen
put this app in your startmenu
everytime you get a sms or mail
click first on gsen at the starmenu
then on you message
now you phone will switch in landscape mode if you want

The only way I have found to type messages in landscape while not affecting manilla ( the dialler rotating is very annoying) is to do a manual rotation when in messaging mode by long pressing the dial button.
To enable this go to Settings ... Personal ... Buttons ... Button 1 , then assign Rotate Screen from drop down list at bottom.
Then when you are replying to text just press and hold dial button and it will go into landscape and keyboard works ok this way , when done just long press to exit landscape.

Enter to send?

Can somebody make a tweak where you would be able to press enter on the keyboard and send a text message. I Love sense 2.5 but when im using HTC messaging i tend to forget that its not like the standard WM messaging where the send button is at the bottom. And ill hit back and have to type my message ALL over again. so either have the enter button to be able to send or move the send button on the SENSE 2.5 to the bottom row and remove the back button?

yes this can be done with to programs...mortscript and rhodium keyboard control...you can write a script to mouse click in the send spot...then map it to the enter key...hope this helps!!

jdmsleepr said:
yes this can be done with to programs...mortscript and rhodium keyboard control...you can write a script to mouse click in the send spot...then map it to the enter key...hope this helps!!
Click to expand...
Click to collapse
How on earth do I do this? I need like step by step on this one? sorry I've never touched mortiscript before

^^^i'd like to know that as well, cause i can't seem to figure it out^^^
guess no one knows how...=/