More than half the time I take my phone out of it's case in my pocket to check texts or call somebody, it's always on and eating battery. Alot of the time I have the phone in vibrate or silent because I can't have it going off most of the day, and whenever I get any kind of notification the screen comes on (text, alarm, call, ect.), and then the screen ends up staying on because it's constantly being bumped and never has the time to shut itself down.
Is there any way I can make the screen stay off at ALL times (except on an incoming call), and ONLY come on when I press the unlock/power button on the top of the phone?
I have a TMobile TP2 and I'm running the Nov. 19th, Photon Energy ROM. Upgrading to the Nov. 27th version when it's done downloading but I don't think that will fix the problem as I've changed ROMs before. Thanks to any help.
you will find that when in the case it should be off, on taking the phone out of the case (i assume the HTC one that came with the phone?)
the magnet in the case triggers the keyboard sensor which turns the screen on.
otherwise, you can change the display time out in power options under settings.
Cheers
Steve
That's interesting, I've heard about the case doing that but never thought about it. Would you recommend any cheap cases, or is there a specific magnet location I should be careful of? And do you know if there is a way to keep the screen off when I get a text message for example?
There is a way to fix this... it is to disable "Wake on Slide." I have done this and no more problems.
Here is a link to what to do:
http://forum.xda-developers.com/showpost.php?p=2945249&postcount=3
Hope it helps you, as it did me.
Thanks for the reply and I appreciate the help, but I don't really have a problem with the wake on keyboard slide, it seems that if the phone is in my pocket locked, and I get a text message, the screen comes on to notify me that I have a text message. Then, it's usually being bumped around in my pocket and since the touch screen is usable with any object, it will stay on because something will tap it in my pocket. The phone then heats up over time and drains battery. I want to find a way to keep the screen off at all times unless, I either receive a call, or push the power button. Thanks.
illusion of progress said:
Thanks for the reply and I appreciate the help, but I don't really have a problem with the wake on keyboard slide, it seems that if the phone is in my pocket locked, and I get a text message, the screen comes on to notify me that I have a text message. Then, it's usually being bumped around in my pocket and since the touch screen is usable with any object, it will stay on because something will tap it in my pocket. The phone then heats up over time and drains battery. I want to find a way to keep the screen off at all times unless, I either receive a call, or push the power button. Thanks.
Click to expand...
Click to collapse
Try:
go to HKLM\Drivers\BuiltIn\RIL
change DisableSMSWakeUpEvent to 1 (0 will wake up the device)
On my Rhodium, it does not wake up by default. I hear the notification, but my screen remains dark
Or try this cab file ... soft reset after install
Thanks for the .cab, I'm restarting now to see if it fixes the problem. Kind of random, but I might as well ask here before starting a new thread. I started using Mobile Shell instead of TF3D and so far I love it, but when setting a wallpaper, the wallpapers that I would normally use in TF3D, (480x800), it makes me select or crop out part of the photo to use as a background in Mobile Shell. I can't tell if it actually gets blurry (I would think so, because it's stretching the picture), but does anyone know why it wants me to only use a certain portion of the background instead of just setting the entire picture? Thanks,
More than likely, the version of Mobile Shell you have is either not designed for WVGA or there is a setting somewhere in there that allows you to change it and you haven't found it yet.
Am not a expert on mobile Shell, but according to their website, the latest version (3.5) does support WVGA.
Another option is to, if you have Adobe Photo shop or something similar, scale down the entire picture to the size it reccomends.
Otherwise, if you have a version earlier then 3.5, maybe you could upgrade and see if it makes any difference.
Related
I was looking at my HD today and had an idea.
I use a silicone cover/case, and hence it covers the power button (LED light)... so my idea was some sort of visual notification via the display for various items (such as missed call, new SMS, etc.)
This idea comes in part from the Diamond's visual notification via the round circle/d-pad.
I think this would be possible... here is my thinking:
Since the phone already "wakes up" during a call/missed call... and there is the "wake on SMS" option as well -- then after either, have a program change the screen to black (hide TouchFLO or Today Screen), and display a design or color pattern on the screen. I think the program would also have to prevent the screen from going to sleep and/or offer a timer setting for this. In any case, displaying something on the screen to alert you to a missed call... something like a screen saver.
Once a program is created, then the fun part will be creating new designs / patterns / colors for the screen.
Any ideas on this?
Thanks.
Anyone?
Or anyone at least think this is a good idea? Or perhaps, are there other programs out there like this?
Thanks!
I think it's a great idea, to be honest.
With the creativity of people in these forums, it shouldn't be an impossible mission
keithrl79 said:
I was looking at my HD today and had an idea.
I use a silicone cover/case, and hence it covers the power button (LED light)... so my idea was some sort of visual notification via the display for various items (such as missed call, new SMS, etc.)
This idea comes in part from the Diamond's visual notification via the round circle/d-pad.
I think this would be possible... here is my thinking:
Since the phone already "wakes up" during a call/missed call... and there is the "wake on SMS" option as well -- then after either, have a program change the screen to black (hide TouchFLO or Today Screen), and display a design or color pattern on the screen. I think the program would also have to prevent the screen from going to sleep and/or offer a timer setting for this. In any case, displaying something on the screen to alert you to a missed call... something like a screen saver.
Once a program is created, then the fun part will be creating new designs / patterns / colors for the screen.
Any ideas on this?
Thanks.
Click to expand...
Click to collapse
Sounds interesting I wonder how it would be on the battery though. I think it would be nice if the screen would light up but maybe not as bright as the notification on the Raphael but something to that effect. I like the idea though.
i like it too.. i think im gonna try writing something for this one!
Any updates on this one?
Or any one know of any other programs out there that might do something similar. I hate not knowing I have missed calls/SMS.
Thanks all...
I saw in an other post a program that vibrates/sounds the device in a set interval until you acknowledge the missed call/sms.
No idea where it's located, but the search functionallity can do wonders.
I use S2U2, and if I understand your requirements correctly, it does exactly that.
I usually have the phone switched off using the power button (so the screen is blank). If there is a missed call or a new sms, my phone automatically wakes up and S2U2 gives me notifications about new SMS and/or missed call.
Under the Windows power settings, I have the phone configured to turn off backlight after 10 seconds, and the the option 'Turn off device if not used for' option disabled. This makes sure my device does not go back to sleep if there is a missed call or SMS. You also need to have the option to show missed calls and SMS alerts in S2U2 settings enabled. So when a call is missed or new SMS, my phone will be awake with backlight switched off. If I tap on the screen, S2U2 will show my anything I have missed.
I think you also need 'Wake up on new SMS' option enabled in HD Tweak.
PhoneAlarm
Or you can use Phone Alarm, this can be set to repeat alarm noticifcations for missed calls, messages, etc including vibration and sound options for each type of alarm. Also, offers an otpion whether or not the backlight comes on. Have been using this softwarte for years, also provides profile options.
www.pocketmax.net
Hennyb said:
Or you can use Phone Alarm, this can be set to repeat alarm noticifcations for missed calls, messages, etc including vibration and sound options for each type of alarm. Also, offers an otpion whether or not the backlight comes on. Have been using this softwarte for years, also provides profile options.
www.pocketmax.net
Click to expand...
Click to collapse
Hi, Checked out the Website, Looks Good... Does it work with TF3D??
Tnx
Thanks for the replies,
I actually already use PhoneAlarm from Pocketmax. It works GREAT on my Touch HD. What's neat about it, is that it has an option where it makes a softkey at the bottom to toggle between your Today Screen and TouchFLO.
What exactly I was looking for was some "visual" notification of a missed call/sms. This would be both functional and "cool" to see.
The thought comes from the HTC Diamond, where the light around the d-pad flashes in a circle.
Of course on the Touch HD, the only option would be on the display. So I was thinking of cool screen designs (like a screensaver), where if you had a missed call or SMS, the phone would "wake up" but then show some sort of design.
[As I was typing this I paused at this point and went to research S2U2 more... and I am going to try it out right now -- it does seem to do what I am looking for!]
However, if anyone reads what I mentioned above and has any other ideas (or even a more of a simple program) that would do the same, let us know... THANKS AGAIN EVERYONE!!
-Keith
I installed S2U2 and i didn't find it of any use (My original intention was to install to provide the Iphone Like Slier). I recall it does show you on screen if you have received a text, not sure if their was a visual notification.
I will have to read up on S2U2 and see what other benefits it has.
So many Apps out their that do so many different things, it's like being a kid in a sweetshop. I guess it's about deciding which app to use based on what you need it for.
Nevertheless...Absolutely brilliant work from all those who actually take time out to develop these apps - and can't thank them enough!
Let me know how S2U2 works for you and meanwhile i'll read up on it again
All the best...
I tried phonealarm, but
Heh Keith,
I actually love phonealarm and have used it for years. But now, though I've been in touch with the developer who btw provides excellent cs, I'm quite convinced that PA is causing a heavy battery drain. I've been experimenting with PA on, then uninstall it, reinstall it, etc. Yesterday, started with a full charge and with PA, 5 hours later down to 60%. I was able to uninstall PA with about 60% charge remaining and immediately, the drain stopped. Charge stayed above 60% for the next several hours. BTW, this is on a fuze. I've also checked all settings in PA. The developer says he did note that he saw a big power drop from the PA logs, but couldn't determine what caused it. Curious how PA is working for you.
I just don't get it
So maybe I'm making a fool of myself-talking to myself at least. I just did a whole day's worth of testing with and without PA. Now there seems to be no difference or perhaps just a very little. The only things that I did different this time was loaded PA after I installed all of the other apps (rather than before) and I didn't enable touch flo support. I wonder if that could be it. With touch flo support enabled, then touch flo runs in the background? Did I read that somewhere in another thread?
If you dont want/need all the bells & whistles & want a 'light' program try alarm pal by the same mob as phone alarm.
I've been using it for awhile on the HTC HD.
If I miss a call/sms/mail it plays an alert every few minutes till I acknowledge it.
I figure I am more likely to 'hear' an alert than 'see' an alert
http://www.pocketmax.net/alarmPal.html
Hi All,
Does anyone know how to get this working on our beloved HD's? I hate the way the screen goes completely black during a call, we can't use the light sensor to tell the phone that the call has finished and it is away from your ear (so screen comes back on a la iphone), and i keep doing things during a call with my ear!!
So this seems like the ideal solution - but i can't get it to work!!
I've copied over the file to the windows folder, then soft reset. Changed the registry entry for phoneLockEnable to 1 in HKLM/Software/HTC/Phone but still no joy!
All help would be greatly appreciated.
Regards
DF
hi, where you found out this software? it look's great, can you share the link to me? recall i saw some post like this, but just for diamond, i'm looking one for my hd, is there anyone have?
chanmama said:
hi, where you found out this software? it look's great, can you share the link to me? recall i saw some post like this, but just for diamond, i'm looking one for my hd, is there anyone have?
Click to expand...
Click to collapse
Sorry, i don't have the cab file, i just saw the screenshot and thought 'that's what i need'!!!
Hopefully some bright spark here can help us both (and others probably).
Regards
DF
Beside this transparent canvas, where can I get the orginal canvas?
I am using a offical ROM but I don't see this function!
I hate the way the screen goes completely black during a call, we can't use the light sensor to tell the phone that the call has finished and it is away from your ear (so screen comes back on a la iphone), and i keep doing things during a call with my ear!!
Click to expand...
Click to collapse
that's interesting, because my screen doesn't go blank during calls and it happens quite often that i accidently disconnect a call (i suppose because i hit a button with my ear).
so in search for i solution i found in Advanced config a tab Light sensor > Light sensor polling which i set enabled. the explanation says "uses light sensor to automatically turn screen off when the phone come near from your ear to answer a call". so this should set it like the i-phone does, right?
hence when i tested it, the screen still was on, even when i put my thumb onto the light-sensor.
is this because i don't have a stock rom (i use Duttys HD V1.9b XTREME) or is there something i can do about it.
it would be really nice to have the screen locked when i answer a call and to outomatically unlock it if i remove it from my head to use some function on the screen..
take55 said:
that's interesting, because my screen doesn't go blank during calls and it happens quite often that i accidently disconnect a call (i suppose because i hit a button with my ear).
so in search for i solution i found in Advanced config a tab Light sensor > Light sensor polling which i set enabled. the explanation says "uses light sensor to automatically turn screen off when the phone come near from your ear to answer a call". so this should set it like the i-phone does, right?
hence when i tested it, the screen still was on, even when i put my thumb onto the light-sensor.
is this because i don't have a stock rom (i use Duttys HD V1.9b XTREME) or is there something i can do about it.
it would be really nice to have the screen locked when i answer a call and to outomatically unlock it if i remove it from my head to use some function on the screen..
Click to expand...
Click to collapse
Hi take55,
Yes, i'm aware of the advanced config tweak (also in HD Tweak), and as you correctly state, the screen should/will go blank on call connection (i'm running kwbr's A Touch Of HD 3.3.4 and mine doesn't, even with tweak applied!!).
Unfortunately, when the call ends and you move the phone away from your ear, the screen still stays blank????? I've read somewhere on these forums that it never will work like the iphone (not sure why, as the light sensor should recognise that we've moved the phone away from our ears).
So that is why i'm trying to get this other method to work. What i have noticed is that with the bmp copied over to the windows folder or with a cab i found by A-Math installed, my dialler locks up after every call (as if the transparent phone lock is in place) but i can't actually see it. None of the screen works and i have to soft reset. Maybe something is stopping the bmp to show on the phone....who knows.
It also might be the fact that this was designed for the Diamond (found the cab on the Diamond forums).
Just hoping some genius here might now how to sort this.
I've attached the cab file i've found, give it a try and see if you have the same issue as me.
Regards
DF
chanmama said:
hi, where you found out this software? it look's great, can you share the link to me? recall i saw some post like this, but just for diamond, i'm looking one for my hd, is there anyone have?
Click to expand...
Click to collapse
Hi chanmama,
Found the cab file for you, see previous post.
Regards
DF
Datafanatic said:
What i have noticed is that with the bmp copied over to the windows folder or with a cab i found by A-Math installed, my dialler locks up after every call (as if the transparent phone lock is in place) but i can't actually see it. None of the screen works and i have to soft reset. Maybe something is stopping the bmp to show on the phone....who knows.
Click to expand...
Click to collapse
It has nothing to do with the BMPs but with the registry setting that the CAB also makes. It sets HKLM\Software\HTC\Phone\PhoneLockEnable to 1, in wich case you'll have to press the power button to unock (no need to soft reset). For the BMP to work the phone/dialer software will have to support it, otherwise it just locks the phone in the usual way: black screen, power button to unlock.
Datafanatic said:
Hi chanmama,
Found the cab file for you, see previous post.
Regards
DF
Click to expand...
Click to collapse
tks but your cab only for the canvas skin only, do not contain the original software (slidable canvas), anyway, tks for your help
I've also found this problem to be quite annoying during a phone call but have found some sort of way to deal with it.
Firstly my ROM isn't tweaked, its just the basic one already installed.
After a call is connected, the screen switches off. But if you need to access the screen again during a call, I just press the "Back Arrow" key, one of the four hard buttons on the bottom which brings the screen back up again.
If you press the phone button instead whilst the screen is off, the screen lights up again but it puts the call on hold.
This probably isn't the best way to deal with this, but it seems to work for me for the time being, hope this helps anyone else here.
rubbermonkey123 said:
I've also found this problem to be quite annoying during a phone call but have found some sort of way to deal with it.
Firstly my ROM isn't tweaked, its just the basic one already installed.
After a call is connected, the screen switches off. But if you need to access the screen again during a call, I just press the "Back Arrow" key, one of the four hard buttons on the bottom which brings the screen back up again.
If you press the phone button instead whilst the screen is off, the screen lights up again but it puts the call on hold.
This probably isn't the best way to deal with this, but it seems to work for me for the time being, hope this helps anyone else here.
Click to expand...
Click to collapse
Useful info - I found this particularly annoying yesterday during a ouple of calls.
Also discovered Gyrator tries to turn the phone screen and was laggy - which was even more annoying!
Everyone!!!
CHECK THIS OUT - http://forum.xda-developers.com/showthread.php?t=489034
Answer to all our prayers - a screen lock which uses the g-sensor and not the light sensor.
Now, when a call is connected, holding the phone to the ear blacks the screen, but when you bring the phone down (to use the keypad or something), THE SCREEN COMES BACK ON!!!!!!!
Tried and tested on kwbr's A Touch Of HD v3.3.4 (probably the best manila2 ROM out there!)
Regards
DF
I wanna make another post here cause in the last post this issue wasnt resolved and i wanna fresh thread here, please only post if you have the solution, thanks hope theres someOne who can get this issue resolved.
Do you use AutoKeylock ?
I had this problem when I started using 6.1 ROMs first.
In my case I had about 6 applications I always installed right off the bat after a new ROM flash. One of those was Maniac's AutoKeylock.
I timed the duration between answering a call and having the call go white one day, and it seemed to me to match precisely with the screen timeout settings I had in AutoKeylock.
I removed the application, and have never seen the problem happen again.
However, I do miss having AutoKeylock.
I realize that this could be totally coincidental, and thus I asked before whether others who had the problem also used AutoKeylock but never got a reply.
Perhaps you can reply as to whether you use it or not. And, if you do, whether removing the application resolves the issue for you.
If there is a correlation then we can alert Maniac to the issue, and he may be able to find a solution.
LiverpoolFCfan said:
I had this problem when I started using 6.1 ROMs first.
In my case I had about 6 applications I always installed right off the bat after a new ROM flash. One of those was Maniac's AutoKeylock.
I timed the duration between answering a call and having the call go white one day, and it seemed to me to match precisely with the screen timeout settings I had in AutoKeylock.
I removed the application, and have never seen the problem happen again.
However, I do miss having AutoKeylock.
I realize that this could be totally coincidental, and thus I asked before whether others who had the problem also used AutoKeylock but never got a reply.
Perhaps you can reply as to whether you use it or not. And, if you do, whether removing the application resolves the issue for you.
If there is a correlation then we can alert Maniac to the issue, and he may be able to find a solution.
Click to expand...
Click to collapse
You know if the reason you miss autokeylock is for the ability to set a time for the screen to turn off and the keypad to lock, smarttoolkit does that, with no problems.
HTCP4000PPC said:
I wanna make another post here cause in the last post this issue wasnt resolved and i wanna fresh thread here, please only post if you have the solution, thanks hope theres someOne who can get this issue resolved.
Click to expand...
Click to collapse
How often it happen?
With my phone running Kavanas I will get a white screen once after a reboot and then I press and button and it goes back to normal and wont do it again. I have gotten used to it.
For some reason I think it has to do with Tornado PowerControl, do you have that installed? I just cant figure it out exactly. Maybe we can find a solution.
We'll i believe this White screen has something to do with the backlight settings in power managment, i find if you leave screen on full and turn off the phone from turning off the screen, the white screen wont happen, this isnt so bad, cause if u want the screen to go off just hold down the disconnect phone button, not too bad cause when your not wanting to use the phone anymore the screen still goes off, also you can turn the backlight off in accessories which is the same as setting the screen to go off automatically in 5 seconds, white screen fixed moreless.
Same issue with Ricky's v24 and now with Rose 1.7
I also am experiencing this issue, but do not have installed neither Maniac's AutoKeylock nor Tornado PowerControl.
It happens sometimes during a call, sometimes not.
It happens when leaving the phone unlocked and timesout idle time. If hit the Home or back buttons, it shows the home screen again and next timeout does work fine.
I have beeing looking up and down for fixes but was unable to find one. Some say turning off "Run Lowlight" JOGGR setting, some say flash after a hard reset...
It seems that running lowlight (joggrinfo.exe -m -t) helps a bit. If the phone is fully bright and rests on the table, the screen goes white after timeout.
However, if run lowlight and let it alone, it turns off the screen normally.
Also when it goes white and hit back or home button, the screen goes mid-bright, and then turns off normally.
However, when unlocking, it goes full bright, and then the issue comes back.
In summary ...
Full Bright -> Times out to whitescreen.
Mid Bright -> Times out to lights off.
Unlock -> Goes full bright -> Times out to whitescreen.
White screen -> Hit Back/Home button goes mid-bright -> Times out to lights off.
It would be great if lowlight could be run when unlocking the device.
Does it work same way for you guys??
Regards.
This will stop White Screen from happening.
ok this is a way to avoid the white screen issue, (Click on Light Config) then open CeleTask and in CeleTask - Tools use Close Screen this will turn off your screen and allow the backlight from turning on when screen turns back on, also remember u need to set your power settings to (Backlight time out on battery 5 Seconds and Backlight on AC can be 1 minute which u never use) and Display time out Never..)
You can also use CeleTask to disable the screen when you make a call, just open CeleTesk when you hit call.
Topic should be changed as not a fix but work around "sortof":
Process of illimination:
My recomendation would be try a hard-reset, don't install any programs see if that fixes it now when installing programs don't bung them all on install 1 @ a time soft-reset give it while see if problem resumes, do this for all software then you may find the culprit?
This is not an issue faced by all so something has to be the culprit.
Bad Flash?
Software Install?
JOGGR?
Power Settings?
They are just examples.
I had this happen once but on WM6 and a hard-reset was what was needed and didn't pop up again........
HTCP4000PPC said:
ok this is a way to avoid the white screen issue, (Click on Light Config) then open CeleTask and in CeleTask - Tools use Close Screen this will turn off your screen and allow the backlight from turning on when screen turns back on, also remember u need to set your power settings to (Backlight time out on battery 5 Seconds and Backlight on AC can be 1 minute which u never use) and Display time out Never..)
You can also use CeleTask to disable the screen when you make a call, just open CeleTesk when you hit call.
Click to expand...
Click to collapse
These instructions have fixed my device... I got an Elf and I made it my primary phone, and now I´m experiencing new ROM´s in my S621. This problem happens in my device (the S621, of course), and I´m now using NRG remade by Ricky and Stylez, and this problem with the screen seems to be solved with this tip.
This problem does not happen when I use "Kavana remade by Ricky and Stylez" only with NRG and it´s Remake.
Regards
If this isnt helping try just disabling Timeout and set everything else ur way u want.
Any way to stop this.. I used the registry to stop it from waking up due to my magnetic case.. i have the notifications to make a noise and flash the led... i dont want it to come out of standby to tell me about an upcoming appt (the dismiss/snooze notice) cause i keep pocket running apps or pocket dialing my sense 2.5 front shortcuts!
ANY HELP would be greatly appreciated!
mrwebsmith said:
Any way to stop this.. I used the registry to stop it from waking up due to my magnetic case.. i have the notifications to make a noise and flash the led... i dont want it to come out of standby to tell me about an upcoming appt (the dismiss/snooze notice) cause i keep pocket running apps or pocket dialing my sense 2.5 front shortcuts!
ANY HELP would be greatly appreciated!
Click to expand...
Click to collapse
Try this: Start > Settings > Sounds & Notifications > Notifications > Event: Reminders > uncheck "Display message on screen."
I hope that solves the problem!
thanks! i will try that and get back to you
UPDATE: damn... this doesnt work... for "reminders" in settings/notifications i only have flash light, play sound, and vibrate selected and the screen/phone wakes up/resumes and if it had been in my pocket or whatever i'd be calling people.. any other ideas?
mrwebsmith said:
thanks! i will try that and get back to you
UPDATE: damn... this doesnt work... for "reminders" in settings/notifications i only have flash light, play sound, and vibrate selected and the screen/phone wakes up/resumes and if it had been in my pocket or whatever i'd be calling people.. any other ideas?
Click to expand...
Click to collapse
Sorry about that. I just noticed myself right now that my phone woke up for a reminder.
Hmm... I don't know, but I think you should get a working screenlocker. I use TouchLockPro (now you can use your zoombar as an unlock bar). I set it up so that when the screen wakes, the phone instantly locks.
If you decide to use TouchLockPro, the settings are a little hard to understand (I followed the Settings instructions in the developer's website). If you need help with the settings, or if you want an example of my settings, feel free to PM me.
try this ..
warlock...thanks for that cab.. but it didnt work...at least not for calendar reminders.. i will test it on txt msgs as that would help as well
sumflipnol: thanks.. i guess i will have to look into screen locks.. its just annoying cause im fine with the "screen lock except for power button" behavior of winmo.. but if it could just stay asleep for the reminders (other than the sound/led/vibrate options) it'd be perfect
ill let you know if that locking program works out for me
hold down the end button
locks the screen wont but dial or open apps when the screen wakes up
cirrob said:
locks the screen wont but dial or open apps when the screen wakes up
Click to expand...
Click to collapse
I believe you're referring to the default Windows Mobile SmartLock (auto-lock). I have that on my phone, and it's not very reliable. My phone sometimes wakes up on my desk, and I notice that Sense2.5 is active (SmartLock obviously failed to auto-launch the WM screenlock). From my week-long experience with TouchLockPro, the screen locks immediately without that small lag, and it's very consistent.
There must be a way!
I'd like to ressurrect this thread to see if anyone has any further ideas.
I also prefer to just use the power-button method of putting my phone into standby rather than mess around with screen locks or anything.
I've disabled wake-up-on-SMS. But it still wakes up whenever there's a reminder for an appointment.
Surely there's a way to stop this behaviour!....
It's an open question, so far...
As many of you, I would like to disable the device wake up for reminders. Same as you, I just want the sound and / or light notification for them.
I've been searching WEB, all XDA forum and my phone registry but I haven't found anything useful for reminders, just for SMS.
The same issue has been posted in other places (for example, http://forum.xda-developers.com/showthread.php?t=615633) but there's no final answer yet.
Definitely, lock screen is not enough, because if the device wakes up and the screen turns on, it can keep on for a long time (caused by the screen being pressed because the phone movement inside the pocket) and battery drains very fast.
Anyone using TouchLockPro or PocketShield?
What are your impressions, pros/cons?
Thanks
Touch lock pro is really good but i removed it because some major features weren't working, maybe its just the ROM i used. But its great!
I was using s2u2, but kept having issues, probably has more to do that I don't use a stock rom, versus the program, but I switched to pocket shield and have no issues with it. I don't use all the features, just mainly the screen lock.
p51d007 said:
I was using s2u2, but kept having issues, probably has more to do that I don't use a stock rom, versus the program, but I switched to pocket shield and have no issues with it. I don't use all the features, just mainly the screen lock.
Click to expand...
Click to collapse
hmm good to know...I was about to ask about S2U2 too...it looks great...but I was reading the threads on it and it seams like issue after issue that people are talking about...maybe just the users/roms/or devices...idk
I downloaded the trial version of Pocket Shield...which you can use for 10 days before having to buy it.
Noticed some issues...probably things that just I would notice ...
(1) It enables the ability to select Repeat...under settings>Sounds&Notifications>Notifications>Reminders [I thought this was great...since this feature disappeared after WM 2003]
(2) in the same area...under Voicemail, Missed Call, and Text Messages you can now enable "flash light"...although these options are no available for New MMS...or ...New E-mail...or Reminders
(3) When Reminders go off...the light flashes anyways...until you dismiss or snooze... [I thought this was annoying cause I usually associate LEDS with missed e-mail, text, voicemail, not reminders...]
(4) You have some boost alarm options....where you can choose snooze options....this is basically an alarm to tell you have unchecked e-mail, text, voicemail, reminders etc... BUT the SNOOZE options don't actually work...this seams to never stop...just keeps going and going...even after the reminders and all missed calls are answered :x Edit:OK, so apparently...when this alarm goes off on the lock screen...you click on the item on the lock screen, then slide the screen...where the snooze options are revealed! yaay! ...but no dismiss button :X Ok, figured this out. For Boost alarm options you have a time setting for when you want it to work, plus you can check what you want it to work for, mine kept going off because I had it checked to go off as long as there was something on "today & tomorrow's Agenda" haha oops
(5) After a call...the screen locks...even if this feature is turned off on pocketshield...
(6) strange thing...i think is a feature of pocket shield...that we can't control...the phone screen turns off when you hold the phone up to your ear...even if the feature..."protect screen during call" is off....sortof like the iphone proximity sensor...not sure if our phone already did this...but I don't remember it doing this...before....
...if anyone knows that this is a normal feature...and how to turn it off...that would be great...
(7) For some dumb reason...the TouchFlo3D Slide to Unlock Screen is gone again....and it has defaulted back to the old WM Unlock...if I hold End key down....yaay! (sarcasm) ...this happened strangly the other day too...without this program...and I had to hard reset to get it back :x
(8) No clue why...but after a call...the phone decided to vibrate without stopping...until I pulled out the battery....when i turned it back on ...it went back to vibrating...but stopped after it finished booting...no clue why this happened...but it only took place once...wasn't a reoccurring problem
maybe this is all happening because it isn't the full version...idk...I thought it would be full...just minus access to the skins and it would just disable in 10 days...but idk...
This is all on my stock Rom too....which is nuts
Another annoyance...when you hit the power button...it turns of any media player you had running...so you can't turn the screen of and play music at the same time...unless plugged into external power.
I found that I can turn the screen off...and keep the media player running if I push the PocketSheild Lock button...this gives you the option to turn the screen off...or go to the lock screen...which will turn the screen off too and keep the media player running.
Major annoyance...should just be able to hit the power button and have the screen turn off and lock...with the media player still playing...what if I want to save battery by turning my screen off while listening to music...or put the phone in my pocket with headphones...
StrangeShadow said:
hmm good to know...I was about to ask about S2U2 too...it looks great...but I was reading the threads on it and it seams like issue after issue that people are talking about...maybe just the users/roms/or devices...idk
Click to expand...
Click to collapse
Yeah, I don't fault S2U2, it's a good program. I hear from a lot of people that use it and like it, but I was having issues. It's funny to show iPhone drones the S2U2 lock screen with the battery showing (the default iPhone screen?), and they say "hey, when did you get an iPhone" swipe it unlocked, and they say you can't have iphone on a windows phone LOL....priceless.
p51d007 said:
Yeah, I don't fault S2U2, it's a good program. I hear from a lot of people that use it and like it, but I was having issues. It's funny to show iPhone drones the S2U2 lock screen with the battery showing (the default iPhone screen?), and they say "hey, when did you get an iPhone" swipe it unlocked, and they say you can't have iphone on a windows phone LOL....priceless.
Click to expand...
Click to collapse
at least people don't mistake your phone with a nokia,
it's driving me crazy
I used TouchLockPro for a long while. Generally, I like it. I locks well and the unlock with light feature is great.
Recently, the unlock with light feature was added to PhoneAlarm. I use and like PhoneAlarm, so I just updated and now have a single program with my alarm profiles and screeen locking plus a slide to unlock. Handy.