Hi guys,
is it possible to change the color of the LEDs?
My intention: Normally the LED glows green, when I missed a call or something like that it glows orange and when the accu is nearly empty it glows dark red.
Often I see the green LED in the corner of my eye and think it's orange - although I know that it's not.
So: Is it possible to change the color of the normal alarm LED into dark red? I tried no2chem_nueLED but it doesn't show the dark red LED.. :-/
Thanks in advance!
sorry to hijack the thread but is there a way to stop the led flashing all the time? the led next to the internet explorer button is constantly flashing green
hey,
Yeah I've been trying to figure out if there's a way as well. The same thing happens to me all the time. Whenever I see the green light from the corner of my eye I think it's orange too .
Anyone willing to shed some light on this?
@HungryHippo
The green lights indicate that your phone is currently connected to the Phone Network... it doesn't flash when you're out of ranch.. I don't know how to turn it off other than putting your phone in Flight Mode..
Hi there...
I think this thread is in the wrong place but ill still help
Use a regestry editor to change the leds
Disable flashing service LEDs
[HKLM\Drivers\BuiltIn\AllLEDMgr]
By doing this It WILL dissable the phone from vibrating!
As for changing the LED's colour I dont know how to but I will have a look!
Use the wiki as it is your friend!
How do you get the thing to be ON? The Green light used to be on when on charge......sadly I haven't seen the light ON now for the last 2 weeks despite it being on charge and does charge too?
Do I need to use the same registry hack to get the light to come ON?
HELLLPPPPPPPP
SPV_M3100
PAYS 3.5 ROM
HungryHippo said:
sorry to hijack the thread but is there a way to stop the led flashing all the time? the led next to the internet explorer button is constantly flashing green
Click to expand...
Click to collapse
Weird ... the same thing happens to me, too! I thought it was my aging eyes ... though I KNOW I'm not color-blind. But yes, when seen with only peripheral vision, it often appears to be the amber color. Very strange perceptual event here.
u could try using the nueled software in the dev and hacking forum not sure if it works like it should tried it once but u can always try it
yeh, nueLED has your best options...here's the thread:
http://forum.xda-developers.com/showthread.php?t=371391
The reason your peripheral vision sees a different colour is that the LED isn't actually one LED - it's two. Probably red and yellow. This allows it to display
3 different colours, ie.
R = Red
Y = Yellow
R+Y = Green.
The R+Y is probably created by high-speed alternating between red and yellow. Your peripheral vision detects one colour only, probably because there are far less colour receptors at the side of your visual cortex than near the centre and they only register the one colour. As soon as you look directly at it, more rods/cones come into play and your brain then interprets what it's seeing as the blended colour, green.
The above isn't exactly correct, but it's close enough so you get the idea....
Amber
Hi!
I have another problem/request. Since I am not with my phone all the time I would like the Amber LED to flash if I have a missed call for indefinite time (until I check the calls) and not only for a limited period (and then changing back to green). It was already implemented in TNT6.0 SE ROM.
Is there only a question of some registry change (and which)?
antonof said:
Hi!
I have another problem/request. Since I am not with my phone all the time I would like the Amber LED to flash if I have a missed call for indefinite time (until I check the calls) and not only for a limited period (and then changing back to green). It was already implemented in TNT6.0 SE ROM.
Is there only a question of some registry change (and which)?
Click to expand...
Click to collapse
If you go to settings>sounds¬ifications>notifications>Phone:missed calls
You can change the Flash Light For value to NO LIMIT. Default is 15 mins.
Hope this helps
Dave
Sure it helps.
Thanks a lot.
douginoz said:
The above isn't exactly correct, but it's close enough so you get the idea....
Click to expand...
Click to collapse
Especially since yellow+blue=green.
hmm
yeah... nueLED doesn't work on my hermes. It doesn't give me the address of the red LED...
But the LED light does not light up AT ALL?
Has the LED blown?.....Didn't think thta was possible since its not a Bulb?
My very first phone was a old Samsung that had a bright blue LED that flashed letting me know I had a new text message or voicemail or missed call etc. (You could see that thing flashing a mile away)
That is one feature I really miss because I often leave my phone sitting on my desk that Im not around very much and repeating notification tones are out of the question.
Is there a way to use the service LED's as notification lights?
I will PM you a link to get a good one... Just check your messages...
#2! said:
My very first phone was a old Samsung that had a bright blue LED that flashed letting me know I had a new text message or voicemail or missed call etc. (You could see that thing flashing a mile away)
That is one feature I really miss because I often leave my phone sitting on my desk that Im not around very much and repeating notification tones are out of the question.
Is there a way to use the service LED's as notification lights?
Click to expand...
Click to collapse
This is a fine program.
This program is cool. Thanks. Only problem is the flashing LED alert is too much like the phone service LED. Its stuck in my brain that slow flashing green light is meaningless. Any way to make it use the different colored LED's ??
#2! said:
This program is cool. Thanks. Only problem is the flashing LED alert is too much like the phone service LED. Its stuck in my brain that slow flashing green light is meaningless. Any way to make it use the different colored LED's ??
Click to expand...
Click to collapse
I know.. I'd like to see the low battery light and the bluetooth light flash alternating.
I think that is possible but I think you might have to edit some registry for that to occur...
what colors are all there? blue, green and orange? or are they multicolor led?
#2! said:
This program is cool. Thanks. Only problem is the flashing LED alert is too much like the phone service LED. Its stuck in my brain that slow flashing green light is meaningless. Any way to make it use the different colored LED's ??
Click to expand...
Click to collapse
You can stop flashing the green light.
Only when you have a message.
#2! said:
This program is cool. Thanks. Only problem is the flashing LED alert is too much like the phone service LED. Its stuck in my brain that slow flashing green light is meaningless. Any way to make it use the different colored LED's ??
Click to expand...
Click to collapse
I know that if you use a DontForget with PPC you get the choice of colour of LED "from reading there website" but not sure if possible on SP?
May be worth asking in general forum if anyone knows the reg settings needed?
This is not possible to manage LED (only blinking / off) on HTC s620.
jhwo99 said:
You can stop flashing the green light.
Only when you have a message.
Click to expand...
Click to collapse
That might work. Didn't think about that.
I still think it would be really cool if we could figure out how to get all the colors to flash or cycle through a patten.
I will try to look into it and see how it goes.
I noticed that Signal Reception Led is not blinking .
I can see it working sometime and sometimes not.
It is also same for bluetooth led. When I turn bluetooth on, blue led doesnt blink.
Is this hardware issue or software probkem? Can anyone help?
I dont think it has this function (the last device has this function if i'm not mistaken is htc tytn [hermes] ). Its only for notification like new sms, etc. like circle LED light on touch pro (raphael)
Light only flashes when it's told now. Doesn't flash for reception any more. For the record the TyTNII had it.
Mine flashes when I have a new text message or when GPS is on.
That really sucks...
I had a HTC Touch (elf) before, and it works nice to quickly see if bluetooth is on.
also when battery runs out (less < 5%) it blinks red, but not on this device...
could it be done by a hack? or is it just a dual color led?
thank man. I was worried that there is a problem with my device which I received 3days ago.
neforce said:
That really sucks...
I had a HTC Touch (elf) before, and it works nice to quickly see if bluetooth is on.
also when battery runs out (less < 5%) it blinks red, but not on this device...
could it be done by a hack? or is it just a dual color led?
Click to expand...
Click to collapse
There will be flashing amber light when remaining batt level is below 10%.
yeah, it goes blinking orange-like color. but it would be nice if it blinks red when it is nearly empty...
why does they always reject the good features....
I just switched from a Nexus 4 to a HTC One M8 GPe. On the Nexus 4 I used Light flow very much with many colors and blink patterns to be able to identify what was happening without turning on the screen. Now when I have installed Light flow on my M8 it's only possible to choose from 4 colors or something and no blink patterns.
Is this possible to fix?
Great phone but this really bothers me...
djr83 said:
I just switched from a Nexus 4 to a HTC One M8 GPe. On the Nexus 4 I used Light flow very much with many colors and blink patterns to be able to identify what was happening without turning on the screen. Now when I have installed Light flow on my M8 it's only possible to choose from 4 colors or something and no blink patterns.
Is this possible to fix?
Great phone but this really bothers me...
Click to expand...
Click to collapse
Someone can correct me if I'm wrong, but I believe that it is due to the limitations of the LED on the M8 vs the N4. It's a different type of LED so there isn't an ability to tinker with it as much.
I miss that from my N4 too, but ultimately as soon as I saw/see a notification light I check the phone anyway.
Ruxin said:
Someone can correct me if I'm wrong, but I believe that it is due to the limitations of the LED on the M8 vs the N4. It's a different type of LED so there isn't an ability to tinker with it as much.
I miss that from my N4 too, but ultimately as soon as I saw/see a notification light I check the phone anyway.
Click to expand...
Click to collapse
I suspected this but before I got the M8 I didn't even realize that it would have anything else than the best LED. But yeah, 90% of the times It's just a message of some kind so I guess I'll survive. Still annoying though...
djr83 said:
I just switched from a Nexus 4 to a HTC One M8 GPe. On the Nexus 4 I used Light flow very much with many colors and blink patterns to be able to identify what was happening without turning on the screen. Now when I have installed Light flow on my M8 it's only possible to choose from 4 colors or something and no blink patterns.
Is this possible to fix?
Great phone but this really bothers me...
Click to expand...
Click to collapse
Not only is it not possible to fix because of the limitation of the LED that the other poster mentioned, but I'd be shocked if Light Flow gives you any color other than green and if it works consistently.
I had messed around with it some a couple of weeks ago, and gave up. I guess it's possible the Light Flow developer has tweaked it since then, but the version I was using was pretty useless on the M8. I don't fault the Light Flow developer though. I blame HTC on this one.
Andyw2100 said:
Not only is it not possible to fix because of the limitation of the LED that the other poster mentioned, but I'd be shocked if Light Flow gives you any color other than green and if it works consistently.
I had messed around with it some a couple of weeks ago, and gave up. I guess it's possible the Light Flow developer has tweaked it since then, but the version I was using was pretty useless on the M8. I don't fault the Light Flow developer though. I blame HTC on this one.
Click to expand...
Click to collapse
I was able to get green and amber to work. Some colors would just pick green or amber, others just wouldn't do anything.
Andyw2100 said:
Not only is it not possible to fix because of the limitation of the LED that the other poster mentioned, but I'd be shocked if Light Flow gives you any color other than green and if it works consistently.
I had messed around with it some a couple of weeks ago, and gave up. I guess it's possible the Light Flow developer has tweaked it since then, but the version I was using was pretty useless on the M8. I don't fault the Light Flow developer though. I blame HTC on this one.
Click to expand...
Click to collapse
Yeah, it seems to work pretty bad. Are there any other ways to control the LED like Light flow? Does it work better if you just let all the apps control it themselves? I guess not?
I was able to get green and amber to work.
Green, deep orange, magenta and cyan works for me, but green and cyan shows as green/yellow on the LED and deep orange and magenta shows as orange.
Messed around with the LED settings in Textra after I disabled Light flow and suddenly it actually started to blink. Great improvement!
Is it possible to get it to blink in Light flow too?
Edit: Yes, enable color mixing.
djr83 said:
Green, deep orange, magenta and cyan works for me, but green and cyan shows as green/yellow on the LED and deep orange and magenta shows as orange.
Click to expand...
Click to collapse
This is excellent information! Thanks. I'm going to have to reinstall Lightflow and take another whack at it!
---------- Post added at 06:39 PM ---------- Previous post was at 06:38 PM ----------
djr83 said:
Messed around with the LED settings in Textra after I disabled Light flow and suddenly it actually started to blink. Great improvement!
Is it possible to get it to blink in Light flow too?
Edit: Yes, enable color mixing.
Click to expand...
Click to collapse
I use Textra too, so will have to try this as well. Thank you!
Andyw2100 said:
This is excellent information! Thanks. I'm going to have to reinstall Lightflow and take another whack at it!
---------- Post added at 06:39 PM ---------- Previous post was at 06:38 PM ----------
I use Textra too, so will have to try this as well. Thank you!
Click to expand...
Click to collapse
Maybe I was unclear. To get it to flash in light flow you just need to enable mix and choose flash under the right color. This is not specific for Textra, but Textra can flash the Led by itself, without Light flow.
I've really tried getting it to work, but needed to put it in Direct Mode to get the LED with permanent light when lit, instead of flashing.
But in this mode the LED is dimmed even though the settings are set to 100% brightness in lightflow.
To get the LED 100% brightness I needed to remove Direct Mode and accept that permanent light instead didn't work, and live with flashing LED. Hence, not very different control than the standard setup i the Sense rom.
Any clues?
duckstardeluxe said:
I've really tried getting it to work, but needed to put it in Direct Mode to get the LED with permanent light when lit, instead of flashing.
But in this mode the LED is dimmed even though the settings are set to 100% brightness in lightflow.
To get the LED 100% brightness I needed to remove Direct Mode and accept that permanent light instead didn't work, and live with flashing LED. Hence, not very different control than the standard setup i the Sense rom.
Any clues?
Click to expand...
Click to collapse
Try direct mode, root mode and HTC alternative mode. All three at once.
With that Setting the led is always permanent on dimmed like 20% through mixer and also standard control.
Sendt fra min HTC One_M8 med Tapatalk
djr83 said:
Maybe I was unclear. To get it to flash in light flow you just need to enable mix and choose flash under the right color. This is not specific for Textra, but Textra can flash the Led by itself, without Light flow.
Click to expand...
Click to collapse
Yes, I had the LED flashing green from Textra, without Lightflow. But the Textra reminder options are so limited, I'd really prefer to use Lightflow if I can get it working properly.
duckstardeluxe said:
With that Setting the led is always permanent on dimmed like 20% through mixer and also standard control.
Sendt fra min HTC One_M8 med Tapatalk
Click to expand...
Click to collapse
Then I dont know. Works perfect for me. Really bright too. Have you turned off LED notification in screen settings?
I've been fooling around with this a lot since hearing the news that it was working.
I think I've got it working pretty well to my satisfaction now. As I was messing with settings, some of which I may have inadvertently checked (like the Samsung always on setting) I saw a number of interesting behaviors.
One was that at one point my basic notification was, instead of just the green LED flashing, a combination of alternating green and amber colors. (I'm not sure what I did, so don't ask me to reproduce it.)
At some other point I had the LED staying on even with the screen on.
There were other issues, though, when those things were happening. So I kept monkeying with the settings, and I think while neither of those things are happening now, for the most part Lightflow is working acceptably well. I actually would like it if the LED --could-- be on while the screen is on.
Also unless I am mistaken, after an alert, if the screen is turned on but the alert is not cleared, when the screen is turned off, the LED will not come back on. Is this what you two are experiencing as well? I'm pretty sure with my last phone if the alert was not cleared, the LED would continue to flash.
Thanks.
Andyw2100 said:
I've been fooling around with this a lot since hearing the news that it was working.
I think I've got it working pretty well to my satisfaction now. As I was messing with settings, some of which I may have inadvertently checked (like the Samsung always on setting) I saw a number of interesting behaviors.
One was that at one point my basic notification was, instead of just the green LED flashing, a combination of alternating green and amber colors. (I'm not sure what I did, so don't ask me to reproduce it.)
At some other point I had the LED staying on even with the screen on.
There were other issues, though, when those things were happening. So I kept monkeying with the settings, and I think while neither of those things are happening now, for the most part Lightflow is working acceptably well. I actually would like it if the LED --could-- be on while the screen is on.
Also unless I am mistaken, after an alert, if the screen is turned on but the alert is not cleared, when the screen is turned off, the LED will not come back on. Is this what you two are experiencing as well? I'm pretty sure with my last phone if the alert was not cleared, the LED would continue to flash.
Thanks.
Click to expand...
Click to collapse
When the LED is alternating between two colors (or more on other phones) it's probably two (or more) notifications and you've got the settings to loop through them all. Standard setting is to do this when you have the charger plugged in IIRC.
The LED is working with the screen on for me and I think it always has on the M8. On my Nexus 4 it turns off when I turn on the screen and the LED turns on again if I don't clear it and turn off the screen. Great if you don't want to read the message right now and still don't want to miss it later. Since the LED is always working wether or not the screen is on, this is not a problem on the M8.
But if it's possible to alternate with both colors on the same notification, that would be a great way to get a third "color". Could you check if it is like I said or if it really is dual color?
EDIT:
I got it to work! In mixer you can set one color to solid and one to flash to get both. So there are actually a difference on green + amber and amber + green. This will give us a total of 6 options: green, flashing green, orange, flashing orange, orange + flashing green, green + flashing orange.
EDIT2:
The non-flashing color isn't very strong, so I'm not sure how useful this really is.
http://youtu.be/CIRPbcZqV0U
djr83 said:
When the LED is alternating between two colors (or more on other phones) it's probably two (or more) notifications and you've got the settings to loop through them all. Standard setting is to do this when you have the charger plugged in IIRC.
The LED is working with the screen on for me and I think it always has on the M8. On my Nexus 4 it turns off when I turn on the screen and the LED turns on again if I don't clear it and turn off the screen. Great if you don't want to read the message right now and still don't want to miss it later. Since the LED is always working wether or not the screen is on, this is not a problem on the M8.
But if it's possible to alternate with both colors on the same notification, that would be a great way to get a third "color". Could you check if it is like I said or if it really is dual color?
EDIT:
I got it to work! In mixer you can set one color to solid and one to flash to get both. So there are actually a difference on green + amber and amber + green. This will give us a total of 6 options: green, flashing green, orange, flashing orange, orange + flashing green, green + flashing orange.
EDIT2:
The non-flashing color isn't very strong, so I'm not sure how useful this really is.
http://youtu.be/CIRPbcZqV0U
Click to expand...
Click to collapse
It was definitely not really two notifications, though it is somehow possible that Lightflow was acting as if it were. The alternating was definitely like the alternating LED colors that I used to see on my last device when it was alternating between notifications.
I can't reproduce it because I don't know what crazy combination of settings I had at the time. The Samsung always on setting was probably involved. It's even possible I had incorrect checked the Samsung root mode. I was really trying lots of things, and not sure of what I was doing.
Right now, as you suggested, I have Direct Mode, Root Mode, and HTC Alternative driect mode all checked.
I have all LED notifications turned off in Settings/Display and Gestures/Notification Light.
I have Textra set to not notify me in any way, and am using LighFlow for notifications and repeat notifications.
I have not tested things much, so I really don't know how well it is working, but it basically seems to be, though I definitely do not have the LED staying lit with the phone on, or after I turn it on and then back off.
I wonder if some of the differences we are seeing could be due to versions of the phone, rooting procedures, etc. My phone is the Verizon version, and I used Weaksauce to gain root access. Could this make a difference?
Again, many thanks!
It is not possible to fix because of the limitation of the LED.
I was just wondering if anyone here has had luck with lightflow in getting notifications to work.
Currently I can either enable the notification light, and all it does is blink green (despite no notifications), or turn it off. Testing with lightflow resulted in, what seems like, no changes. I know there might not be a large range of colours, but it would be nice to control the notification LED.
It didn't work with any app available, I can't not understand why...maybe the led is not capable of showing more than two or three colors?
The number of colours isn't really an issue. For example, the Nexus S blinked the Home, Menu and back buttons. As long as it can be controlled it would be nice, but it doesn't seem to be able to do it.
I've been aware that I see the notification light even if there are no notifications