Hello everyone -
Newbie here at this stuff, and I was wondering if I can download the Universal ROM AKU3.5 and install it on my Verizon XV6700 phone?
Thanks.
P.S: Universal means it's for everyone? or is it another brand like HTC, Apache, etc.
vboyz103 said:
Hello everyone -
Newbie here at this stuff, and I was wondering if I can download the Universal ROM AKU3.5 and install it on my Verizon XV6700 phone?
Thanks.
P.S: Universal means it's for everyone? or is it another brand like HTC, Apache, etc.
Click to expand...
Click to collapse
Universal is a BRAND, just as Apache is a BRAND.
I suggest you read the Apache Wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Apache
Not much info on there right now, but it will get you started. Also, do a forum search for the Apache or the XV6700 to find out if other owners are successfully able to flash to a new ROM and the steps they took to do it.
Good Luck!!
Thanks for the reply, one question though, you mentioned about new ROM for XV6700 over Apache forum, and I'm assuming u mean the Sprint AKU2.2 ROM right? If so I already got it flashed in my Verizon XV6700 and working now. What i'm interested in is the AKU3.x ROM. Is it possible at this moment?
Thanks.
That's a question you'll need to answer yourself from reading the thread that has the ROM you want to flash to. Each ROM has it's own prerequisites for a successful upgrade, so I wouldn't even want to presume to know whether you can or can't.
Here's the link to Molski's AKU3.2 ROM.
http://forum.xda-developers.com/showthread.php?t=286988
However, it's in the Wizard upgrade section, so you might not be able to use it on your Apache. The only way to know for sure is to read the ENTIRE thread to see if you could use it on your device.
If so, FOLLOW THE DIRECTIONS EXACTLY!!
If it's a Verizon phone, it is not GSM based, therefore it is TOTALLY different from the Wizard, and most other HTC devices.
If you can't do it yourself, learn. If you can't learn, wait for someone else to do it, and find out from them.
Now go have fun!
Hello everyone.
I'm new to this and been reading around, playing with different stuff.
Just finish unlocking my Vogue and now looking for 2 or 3 roms to try.
1. Latest Stable Custom ROM (WM 6.1)
2. Latest Stable OEM Rom (for emergency)
I don't know whats the difference really, but I think I want to try the WM 6.1 Roms, but I been noticing there are so many of them in different forums. I don't know what to do, and it seems most of them are experimental and stuff.
I notice, doing all this process will cause people to go all over everything they done to their phone before (Tweaks im talking about)
Thanks in advance
try the Vogue Forums on PPC Geeks.
cortezzi said:
try the Vogue Forums on PPC Geeks.
Click to expand...
Click to collapse
Thanks
Theres nothing to be found here on Vogue ROMs ?
LycanNyc said:
Thanks
Theres nothing to be found here on Vogue ROMs ?
Click to expand...
Click to collapse
try here
http://forum.ppcgeeks.com/forumdisplay.php?f=59
are you blind, lol sorry, don't mean to flame there is alot out there
Dereks rom
http://forum.ppcgeeks.com/showthread.php?t=18553
mustan-tech rom
http://forum.ppcgeeks.com/showthread.php?t=22471
mrgeoff's rom
http://forum.ppcgeeks.com/showthread.php?t=19933
OMJ's rom
http://forum.ppcgeeks.com/showthread.php?t=17963
and my personall favorite ghettofreeryder's rom
http://forum.ppcgeeks.com/showthread.php?t=21289
vogue upgrade section at ppc geeks
http://forum.ppcgeeks.com/forumdisplay.php?f=59
Yes I found them all thanks
I recently bought a US3G DIAM110 and would like to flash a new rom to it as it seem a bit unstable currently. I have been reading the forums for hours and have the basic jist of how to do that, however what I cannot find is what would be the best rom for my device. The forum search isn't too much help either. Can some one point me in the right direction of a good rom (and/or radio) for me to put on my device?
Thanks,
Cory
try shaks 4.30 rom or nhathoas 1.3 with TF3D2
dont forget to hard spl
mobilkungen78 said:
try shaks 4.30 rom or nhathoas 1.3 with TF3D2
dont forget to hard spl
Click to expand...
Click to collapse
Although Skaks Rom is great....threads discussing which is the best ROM is not permitted on this forum. Please try the newest Roms yourself and judge them according to your standards.
us diamond
band27 said:
Although Skaks Rom is great....threads discussing which is the best ROM is not permitted on this forum. Please try the newest Roms yourself and judge them according to your standards.
Click to expand...
Click to collapse
this is correct......the thread will now be closed......
please note most roms here are for gsm phones.....and won't work on a us diamond.....if you flash the wrong one you can brick your phone.
Just for clarity, the OP has a US 3G [GSM] Diamond, so he can use the ROMs found here. Just be sure to not flash anything labeled CDMA... it will not end well.
hello guys
i have the HTC Touch Diamond (p3700) from rogers, and i was wondering since the phone is locked to the rogers network, is it possible for me to install a custom rom on the phone?? or do i have to do the sim unlock to do that??
sorry, this might be a noob question but i need the question answered as i had the O2 Xda Mini S before my HTC which was unlocked and this is the first time i actually purchased a phone from rogers since i get all my phones from out canada
thanks for your help guys, really appreciate it
i have a rogers HTC diamond as well.. and its got the winmob 6.1 5.2.19965 build 1.2.3 Year 2008.. the HTC website doesnt let me download the feb 2009 firmware as the device is not suitable..
a few simple Noob questions please..
1 - its working in my country with other network sims, all of them but the phone strartup says rogers... is my cell unlocked or not?
2 - will Hard Spl remove everytrace of rogers from my phone? (i actually wana debrand it from rogers to plain standard retail version)..
3 - Will any firmare upgrade using hardspl method work on my cell?.. and what will happen to the orignal FW? will it be erased permanently, or will it still be stored in a secret storage, so that it can be retrieved later when i plan to sell it later and rest to factory defaults?
Again, as a newcomer and a noob at the Xda dev scene, i would apreciate any kind of help .
thanks in anticipation..
devillblood said:
hello guys
i have the HTC Touch Diamond (p3700) from rogers, and i was wondering since the phone is locked to the rogers network, is it possible for me to install a custom rom on the phone?? or do i have to do the sim unlock to do that??
sorry, this might be a noob question but i need the question answered as i had the O2 Xda Mini S before my HTC which was unlocked and this is the first time i actually purchased a phone from rogers since i get all my phones from out canada
thanks for your help guys, really appreciate it
Click to expand...
Click to collapse
Hi,
As far as I know, you should be able to install any ROM you want.
But make sure you have flashed Hard-SPL Olinex Unsigned,
just try the link in my sig and follow steps 6 - 11.
You still need an unlocker to make it possible using other networks though.
farhan_ds said:
i have a rogers HTC diamond as well.. and its got the winmob 6.1 5.2.19965 build 1.2.3 Year 2008.. the HTC website doesnt let me download the feb 2009 firmware as the device is not suitable..
a few simple Noob questions please..
1 - its working in my country with other network sims, all of them but the phone strartup says rogers... is my cell unlocked or not?
2 - will Hard Spl remove everytrace of rogers from my phone? (i actually wana debrand it from rogers to plain standard retail version)..
3 - Will any firmare upgrade using hardspl method work on my cell?.. and what will happen to the orignal FW? will it be erased permanently, or will it still be stored in a secret storage, so that it can be retrieved later when i plan to sell it later and rest to factory defaults?
Again, as a newcomer and a noob at the Xda dev scene, i would apreciate any kind of help .
thanks in anticipation..
Click to expand...
Click to collapse
1. Yes your phone is unlocked, but you are using a rogers customized ROM. Try a different ROM to remove it.
2. No, Hard-SPL will not remove it. You'll need to flash another ROM to do that.
3. Firstly, if you are flashing/upgrading a new firmware (we call it ROM) then all data will permanently removed.
There are some packs to revert your ROM back to stock, but I don't know if there are any Rogers ROM's available on the net.
I hope I have answered all your questions.
Good luck both!
[ElCondor] said:
Hi,
As far as I know, you should be able to install any ROM you want.
But make sure you have flashed Hard-SPL Olinex Unsigned,
just try the link in my sig and follow steps 6 - 11.
You still need an unlocker to make it possible using other networks though.
I hope I have answered all your questions.
Good luck both!
Click to expand...
Click to collapse
hey thanks a lot for the reply, finally someone replies, and this method will not brick my phone right?? since that is what scares me the most the fact that i mite end up bricking my phone
Thanks a lot Elcondor.. it solved half of my problems..
the only thing is,, i tried the 6.5 Prototype rom and rogers sill show up on the startup screen.. i flashed the splash screen, and still the lower 100pixels appear pink, out of no where..
and i simply wana DEBRAND the whole **** of rogers from it, so that i can upgrade the 2.0.0.00 rom version to the HTC official 2.0.43 version, but evertime i download from there, and try updating it, it says, Model ID not compatible..
is there a way to remove the entire rogers crap from it, and get it cleaned like a retail version?...
Thanks a lot sir..
devillblood said:
hey thanks a lot for the reply, finally someone replies, and this method will not brick my phone right?? since that is what scares me the most the fact that i mite end up bricking my phone
Click to expand...
Click to collapse
No, it shouldn't brick your phone. In fact, Hard-SPL makes your device hardly brickable. Just try it, you will not be dissapointed. But, it's not my responsabillity if you brick you diamond, keep that in mind.
farhan_ds said:
Thanks a lot Elcondor.. it solved half of my problems..
the only thing is,, i tried the 6.5 Prototype rom and rogers sill show up on the startup screen.. i flashed the splash screen, and still the lower 100pixels appear pink, out of no where..
and i simply wana DEBRAND the whole **** of rogers from it, so that i can upgrade the 2.0.0.00 rom version to the HTC official 2.0.43 version, but evertime i download from there, and try updating it, it says, Model ID not compatible..
is there a way to remove the entire rogers crap from it, and get it cleaned like a retail version?...
Thanks a lot sir.
Click to expand...
Click to collapse
The splash screen is a harder part to do. You need Patchsplash to patch your splash screen. In that way, the splash screen should appear right. Note that the procedure to do that is pretty hard. Here are some more instructions if you didn't get it.
And about a Diamond stock ROM, take a look here. A 2.03.4 ROM including a new radio and the splash screen.
Good luck guys!
[ElCondor] said:
No, it shouldn't brick your phone. In fact, Hard-SPL makes your device hardly brickable. Just try it, you will not be dissapointed. But, it's not my responsabillity if you brick you diamond, keep that in mind.
Good luck guys!
Click to expand...
Click to collapse
thanks a lot man, well i guess if its doesn't brick the phone then my diamond shouldn't brick unless i do something stupid in the middle of the process, and one more question, since there A LOT of roms on this site, anyway suggestion on which one would b above all, in regards to features and most of all, which rom would make my diamonds performance faster then the stock rom
thanks man
devillblood said:
thanks a lot man, well i guess if its doesn't brick the phone then my diamond shouldn't brick unless i do something stupid in the middle of the process, and one more question, since there A LOT of roms on this site, anyway suggestion on which one would b above all, in regards to features and most of all, which rom would make my diamonds performance faster then the stock rom
thanks man
Click to expand...
Click to collapse
No prob my friend, xda-devs is to help each other.
To recommend a ROM is pretty hard, since there are very different kind of ROMs available.
Do you want a ROM with full Diamond2 experience, without WM 6.5(.x) try Gen. Y D2 R4.
Or, do you prefer a light WM6.5(.x) ROM, try BSB 6.5.1. It is pretty fast and light.
In a short time, I am going to release a 6.5.1 ROM (called Condor GT), with very nice graphics and still very fast.
Just give some a shot and you'll soon find out which ROM is the best.
BTW All the ROMS given in this thread are better that stock ROMs, just to be clear
Regards,
[ElCondor] said:
No prob my friend, xda-devs is to help each other.
To recommend a ROM is pretty hard, since there are very different kind of ROMs available.
Do you want a ROM with full Diamond2 experience, without WM 6.5(.x) try Gen. Y D2 R4.
Or, do you prefer a light WM6.5(.x) ROM, try BSB 6.5.1. It is pretty fast and light.
In a short time, I am going to release a 6.5.1 ROM (called Condor GT), with very nice graphics and still very fast.
Just give some a shot and you'll soon find out which ROM is the best.
BTW All the ROMS given in this thread are better that stock ROMs, just to be clear
Regards,
Click to expand...
Click to collapse
haha yes i know they are all better then the stock roms, but i was wondering if u could guide me, since there are a lot of roms, i am looking for one that has a nice interface, is fast, and wm 6.5 if possible would be awesome
thanks a lot for ur help
OK I'm a noob. I've just downloaded Gen.Y_D2_R5.3-WWE.7z for my HTC Touch Diamond P3700. (On Australia's 3G Network)
Now how do I go about installing it in my phone / flashing it? I've read a few posts but obviously it hasn't sunk in my brain. What do I need, is there additional software I need to complete the flashing. I've read a lot of stuff about cooking etc but have no clue.
Cheers, all help would be appreciated.
spideric said:
OK I'm a noob. I've just downloaded Gen.Y_D2_R5.3-WWE.7z for my HTC Touch Diamond P3700. (On Australia's 3G Network)
Now how do I go about installing it in my phone / flashing it? I've read a few posts but obviously it hasn't sunk in my brain. What do I need, is there additional software I need to complete the flashing. I've read a lot of stuff about cooking etc but have no clue.
Cheers, all help would be appreciated.
Click to expand...
Click to collapse
Well, you're gonna need your reading glasses, lol...this is a good point to start:
http://forum.xda-developers.com/showthread.php?t=416211
and this one is also very usefull:
http://forum.xda-developers.com/showthread.php?t=608668
Anywayz first of all your phone needs HardSPL to be able to flash other roms then the one that came with your device.
I'm sure you'll figure it out, cuz this noob did that too .
O and consider edtiting the subject of your topic cuz this has nothing to do with cooking (= creating a rom) but more with unlocking and flashing custom roms.
Good luck and have fun re inventing your Diamond!