Develop Bugs

Help me fix Orange VM Notifier on WM6 ROMS

Not sure if it affects everyone on Orange UK, but I know quite a few people no longer get the VM indicator when they have a VM waiting on Orange UK.
Instead you get an SMS that would normally turn on the VM indicator "[email protected]" (without the quotes), and another to turn it off when VM has been cleared.
I beleive the answer lies in
\HKCU\Software\Microsoft\SMS\Protocols
There is a clue in this thread: http://forum.xda-developers.com/showthread.php?t=219050
which states:
"Basically, the sms notification messages tell the phone to do things. For example the message to turn on the new SMS indicator is a blank text message with a subject of
Voice Mail
From
"Voice Mail System" . <[email protected]>
The SMS application should delete it afterward. After Talking to a smart guy from T-mobile Wireless Data group I also learned that this is a function of the Glenair voicemail system."
Can someone post the contents of that Hive from a standard Orange M3100 phone? I would guess we may need the app also?
On my phone (0320 WM6) there is no Protocols listed under \Software\Microsoft\SMS
Wotdyafink?

Doing a bit more research....
Could be in
[HKEY_LOCAL_MACHINE\Comm\Cellular\SMS\Protocols\<PROVIDER>]
"Name"="Microsoft <PROVIDER> SMS Protocol"
"DLL"= "<EXPORT_DLL_NAME>"
"ExportPrefix"="<PROVIDER>"
"Priority"=dword:<PRIORITY>
"AppName"="<APPLICATION_NAME>"
"Params"="<PARAMETERS>"
PLEASE can someone check what these are set to on a bog standard Orange PPC Phone?

I've dumped the entries and (hopefully) attached them to this post.

Are you saying the attached reg entries will fix the problem?

philg2000 said:
PLEASE can someone check what these are set to on a bog standard Orange PPC Phone?
Click to expand...
Click to collapse
Could just need a dump from any wm5 - the problem wasnt apparant on any roms proir to WM6. More likely to be something with smsproviders.dll....

I too have this problem since I upgraded to WM6 Black Edition 1.2
Any further ideas on how to rectify the problem?
Is it worth putting a call into Orange UK?
Thanks
Mark

Hmmm... All those reg entries are the same as those in the WM6 ROM.
So, yes, I guess it could be a problem with SMS_Providers.DLL.
Can someone post a WM5 version? I'll rename it, install it, and point the reg entries to it, so what happens...
I certainly wont be phoning Orange asking for help with a Cooked WM6 ROM !

darrellr said:
I've dumped the entries and (hopefully) attached them to this post.
Click to expand...
Click to collapse
Any chance you could pots entries in HKLM\Comm\Cellular\SMS\router ?
Or indeed the whole SMS hive?

@philg2000
Under SMS there is Protocols, Router, and Store but only Protocols has anything contained within it. The other two are completley empty.
Also attached is SMS_Providers.dll

Seen this?
I've posted this before but, may be something in here......
http://www.miousers.co.uk/viewtopic.php?t=144&highlight=dialmonitored

Hmmm... Oh well, I copied the WM5 version of SMS_Providers.dll to \windows as wm5_providers.dll.
CHanged all the references under HKLM\Comm\Cellular\SMS\Protocols
But I got no txt or notification at all. Just NOTHING :-(
So, changed entries back now....

One thing worth noting is that in the preconfig that's carried out when the device hard resets the following registry entries are created, note the comments;
<!--16. PLMN Names 17.9 RegistryKey for Orange UK USIM VMI workaround and 17.10 ONS display rule-->
<characteristic type="Registry">
<characteristic type="HKLM\SOFTWARE\OEM\PhoneSetting">
<parm name="ONSDisplayRule" datatype="integer" value="8"/>
<parm name="EnableUsimEF" datatype="integer" value="0"/>
</characteristic>
<characteristic type="HKLM\SOFTWARE\Microsoft\RIL\OperatorNames">
<parm name="65202" datatype="string" value="Orange BO"/>
<parm name="62402" datatype="string" value="Orange CAM"/>
<parm name="64602" datatype="string" value="Orange MG"/>
<parm name="61203" datatype="string" value="Orange CI"/>
</characteristic>
</characteristic>
Click to expand...
Click to collapse
"Orange UK USIM VMI workaround" - sounds interesting, however I've tried setting EnableUsimEF to 0, but still get the text messages with the symbols. I've just dumped the registry of a working vanilla Orange UK M3100 and will have a browse through to see if I can find anything.

Ok, time for me to get in on the act... I just discovered I had 6 bloody voice messages, so it's time to do some tweaking.

Olipro said:
Ok, time for me to get in on the act... I just discovered I had 6 bloody voice messages, so it's time to do some tweaking.
Click to expand...
Click to collapse
Excellent - look forward to the solution!

Me too, I found I had got 5 messages waiting... how frustrating...
Good luck...

ok, I've fixed it, it's the sms_providers.dll;
I nabbed a dll from an old WM5 AKU, signed it with the test developer certificate (gotta love that signing, NOT) and popped it on the phone.
rang myself and left a message and 'lo-and-behold it works.
signed DLL is provided... for the love of CHRIST please make sure you have the developer certificates from SCM on your PDA.

Perfect, thanks. you the man

Olipro said:
signed DLL is provided... for the love of CHRIST please make sure you have the developer certificates from SCM on your PDA.
Click to expand...
Click to collapse
OK - noob question, but the bit about developer certs....?

Olipro said:
signed DLL is provided... for the love of CHRIST please make sure you have the developer certificates from SCM on your PDA.
Click to expand...
Click to collapse
Nice one, thought so...... I'm at home without a sync cable so will have to try tommorow..
I presume the certs here can be used... http://forum.xda-developers.com/attachment.php?attachmentid=35814&d=1174572298

ibanyard said:
Nice one, thought so...... I'm at home without a sync cable so will have to try tommorow..
I presume the certs here can be used... http://forum.xda-developers.com/attachment.php?attachmentid=35814&d=1174572298
Click to expand...
Click to collapse
try them and find out

Voice Command 1.6 Announcing Incoming calls

I remember in the past that Microsoft Voice Command would announce who was phoning me when my contacts were phoning me. i.e "call from X on mobile phone" it would say. It does not do this anymore. I have fiddled with Settings/voice command and the phone option there and tried all combinations to no avail. If anyone knows a fix I would be greatful, as i do not like to remove phone from case and fiddle around, to know who is calling me. BTW I am running Duttys WM6 Rom, if that helps.
I would be greatful for any insight/assistance.
Regards,
Mohdwadea

MOHDWADEA said:
I remember in the past that Microsoft Voice Command would announce who was phoning me when my contacts were phoning me. i.e "call from X on mobile phone" it would say. It does not do this anymore. I have fiddled with Settings/voice command and the phone option there and tried all combinations to no avail. If anyone knows a fix I would be greatful, as i do not like to remove phone from case and fiddle around, to know who is calling me. BTW I am running Duttys WM6 Rom, if that helps.
I would be greatful for any insight/assistance.
Regards,
Mohdwadea
Click to expand...
Click to collapse
It doesn't work. We are all hoping M$ addresses this issue and provides a fix or new version which does as intended.

Thanks for that Info..
Thanks for letting me know. Saved me a lot of time trying to find a solution. As you say i will wait for a fix from Microsoft. It must be specific to the 1.6 version...as it was working at some stage..most likely when i had the 1.5 version.

MOHDWADEA said:
Thanks for letting me know. Saved me a lot of time trying to find a solution. As you say i will wait for a fix from Microsoft. It must be specific to the 1.6 version...as it was working at some stage..most likely when i had the 1.5 version.
Click to expand...
Click to collapse
You are correct. The closest you can come to a solution is the various fixes that will announce everything else thru your headset when you push the headset button. *sigh*

I have the opposite problem. i am using v1.5 and I would like the announcement of who's calling me to STOP. Even on vibrate/silence, the voice will say "such and such calling from mobile"... it's extremely annoying and i dont know how to stop it.

gr8hifi said:
I have the opposite problem. i am using v1.5 and I would like the announcement of who's calling me to STOP. Even on vibrate/silence, the voice will say "such and such calling from mobile"... it's extremely annoying and i dont know how to stop it.
Click to expand...
Click to collapse
so it is working with black 2.5? how??

I'm sorry i wasn't more clear. I am using the original WM5 ROM (what can I say, its a work phone!)...

(ignore me - just re-read the thread)

MOHDWADEA said:
I remember in the past that Microsoft Voice Command would announce who was phoning me when my contacts were phoning me. i.e "call from X on mobile phone" it would say. It does not do this anymore. I have fiddled with Settings/voice command and the phone option there and tried all combinations to no avail. If anyone knows a fix I would be greatful, as i do not like to remove phone from case and fiddle around, to know who is calling me. BTW I am running Duttys WM6 Rom, if that helps.
I would be greatful for any insight/assistance.
Regards,
Mohdwadea
Click to expand...
Click to collapse
my MSVC 1.6 announces the caller to me on the device. I think the only thing I had to do was change the default setting from announcing over bluetooth to use bluetooth if available. I still have all the same issues as everyone else with announcing over the headset but everything works fine from the device.

Zzan said:
my MSVC 1.6 announces the caller to me on the device. I think the only thing I had to do was change the default setting from announcing over bluetooth to use bluetooth if available. I still have all the same issues as everyone else with announcing over the headset but everything works fine from the device.
Click to expand...
Click to collapse
The problem with not have the call announced is for WM6 only. By you sig you are running WM5

MSVC 1.6 will install on WM6 and WM5, MSVC 1.5 installs on WM5 only.
The problem of NOT announcing callers is related to PDA phones running WM6 on a Samsung processor.
Both Microsoft and HTC are working on a fix, I guess HTC's WM6 official release will have the fix.

4MB PagePool, perhaps?
Just curious - has anyone thought that this problem may have something to do with the defaul Page Pool size of 4MB in most of these cooked ROM's we're using? I seem to remember some of the very first WM6 ROM's we started to play around with had Voice Command working "properly" with regard to incoming call announcement. I've not yet tried Black 3.xx which has a 6MB PagePool - jj made a comment about 4 not being "enough".
I'd love to have this feature back.
Incidentally, I'm not the n00b my profile indicates - I've been browsing and playing around on here since owning my Wallaby, but I can't seem to remember that old username. Oh well.

Cab Fix
ZaJules created a cab fix for this, and I have had to use it on every rom since Vanilla WM 6.0. Check my sig, that's a few releases ago.
Here's the link: http://forum.xda-developers.com/showthread.php?t=296762&page=2&highlight=zajules+bt+cab
Also check out the search criteria: BT Cab and you can also add fix and guess what? It will show you the love.

No, not the BT "fix"
No, I'm not interested in the BT fix - I've accepted the fact that we'll never have true BT headset integration with the Hermes and VC 1.6, but incoming calls are no longer announced through the speaker as they were previously. I've also ruled out the "4MB PagePool" theory as I believe the LVSW variant I'm using has a 6MB Page File size.

Bump....is there a fix?

Yes; sort of. Go through this:
http://forum.xda-developers.com/showthread.php?t=312344

Here's a cab for the fix for MS Voice Command 1.6 announcing incoming callers through the loudspeaker. It works fine on the latest "official" WM6 ROM.
http://rapidshare.com/files/44098658/MSVC_1.60_WM6_8525.CAB

@ NRGZ28,
Do you have Unknown callers announced? Also what about notifications?

simple said:
@ NRGZ28,
Do you have Unknown callers announced? Also what about notifications?
Click to expand...
Click to collapse
I'm sorry but I havent tested that out. For me, the fact that known callers are announced is the most important. I would imagine that if it doesnt, that means it's unknown caller... hehe

OK, did you obtain this version or did you build it from a collection of files?
I noticed the following changes to the file and registry structure:
Build 4622
<parm name="ProcessorType" value="2577" />
<parm name="OSVersionMin" value="5.0" />
<parm name="OSVersionMax" value="6.9" />
<parm name="BuildNumberMin" value="0" />
<parm name="BuildNumberMax" value="-536870912" />
<parm name="UnsupportedPlatforms" value="HPCPALM PC2JUPITERSMARTPHONE" />
<parm name="AppName" value="Microsoft Voice Command US PPC 1.60 for M2M" />
<parm name="InstallDir" value="%CE1%\Voice Command" translation="install" />
<parm name="NumDirs" value="6" />
<parm name="NumFiles" value="46" />
<parm name="NumRegKeys" value="170" />
<parm name="NumRegVals" value="328" />
<parm name="NumShortcuts" value="2" />
Build 17913
<parm name="OSVersionMin" value="5.0" />
<parm name="OSVersionMax" value="6.9" />
<parm name="BuildNumberMin" value="0" />
<parm name="BuildNumberMax" value="-536870912" />
<parm name="AppName" value="PMC VC1.60 US" />
<parm name="InstallDir" value="%CE1%\Voice Command" translation="install" />
<parm name="NumDirs" value="8" />
<parm name="NumFiles" value="51" />
<parm name="NumRegKeys" value="173" />
<parm name="NumRegVals" value="338" />
<parm name="NumShortcuts" value="3" />

About to give up on WM6

Between the buggy as hell Call History, the unfixed phantom alarms, the non-existent reminders, and crappy third-party program support (Orb, etc.), I have found myself on the brink of going back to WM5. Now before I throw in the towel, anyone know if an update is being released to address these issues. If not, anyone know where I can find the T-Mobile WM5 ROM?

the phantom alarms has a fix look it up i cant remember where i found it.... i havent had a problem with my call history so wat is wrong wit yours?...the reminders has a fix also right on this forum u have to edit ur profile xml... and if your other problem has to do with the rotated video theres a fix for that too just look and you will find...and the other third party stuff dont know i guess wait for an update...

freyes01 freyes01 is offline
Member
Join Date: Apr 2006
Location: Miami
Posts: 35
[United States] [U.S.A. - T-Mobile]
Default
getwsted at HF found a solution for the screen rotation issue:
Add the following Key "Rotation" under HKLM\System\GDI\
e.g. [HKLM\System\GDI\Rotation]
Then Add this dword.
"LandscapeMode"=0
It solved my problem with Orb and other Videos with WMP in full screen mode.
__________________
Thanks,
Freddy Reyes
http://www.freddyreyes.com
Click to expand...
Click to collapse
this works for the video streams

Originally Posted by RandyRants
Posted here:
Code:
<characteristic type="Reminder">
<parm name="Script" value="v0p" />
<parm name="InitVol" value="4" />
</characteristic>
Click to expand...
Click to collapse
the reminder fix add this to your normal profile xml

Wow, I guess I should feel lucky. I dont have any of those problems with my WM6 upgrade s620. I have loaded documents-to-go, ewallet, MunduIM, Opera, and Mapopolis and the only problem I have is running out of memory.

Call Recording, 2 way

Hello,
Looking on the internet, even on this forum, tells me that there are lots of solutions for this question. But... It seems to be all for the Kaiser. My question:
What is the best 2 way call recording software for the Rhodium, and which work?
Is there any way to record videocalls? Or is this just impossible?
3rd question, nothing to do with the one above:
I've tried to install the Xperia Panel interface on the rhodium. It works fast and responsice, but:
After installing the Media Xperience panel, and I tap on it, it stays on the media picture.
Choosing other panels needs soft reset.
After deleting of the Panel Interface, Manila 3D is *** up. Only Hard Reset works...
Is there any project to make it compatible without damaging TF 3D? So you can use the panels (Media XP for me) when needed, and close it again to use Manila again (or better, use them both).
Thanks for any response

Nobody? Or does the Kaiser software work?

ever tried this : http://forum.xda-developers.com/showthread.php?p=3965945#3 ?
fora auto voice recording (2-way) in call

WM-Sef said:
Nobody? Or does the Kaiser software work?
Click to expand...
Click to collapse
I don't have mine yet, but I seem to recall someone else posting that the built in app notes (I think that's what it's called) would record two way.

fortunz said:
I don't have mine yet, but I seem to recall someone else posting that the built in app notes would record two way.
Click to expand...
Click to collapse
that does not work my tp2. the availability of 2way recording is probably rom dependent. (i got a german t-mobile mda vario V)

Solution for you.
To enable 2 way recording just change:
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
"VocRecPath"=dword:00000002
and you'll be able to record with any software.
If you want to use WM6 native recording (WAW only, on \my documents\notes, manual activation: during a call hit "record" on call menu) create:
Code:
[HKEY_LOCAL_MACHINE\System\AudioRecording]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\Microsoft\Voice]
"EnableCallRecordMenuItem"=dword:00000001
"AllowInCallRecording"=dword:00000001
Don't forget to turn off (and on again ) the device after you modify/create the keys.
Tested both on my TP2.

wow! works great! how to auto enable "all call" rocording?

slelieveld said:
wow! works great! how to auto enable "all call" rocording?
Click to expand...
Click to collapse
I'm sure you'll need a program for that. This Audio Notes Touch seems the best to me. I've tried it, but to date I haven't had a phone that can record both sides
http://vitotechnology.com/mobile-audio-recorder.html

slelieveld said:
wow! works great! how to auto enable "all call" rocording?
Click to expand...
Click to collapse
I'm glad you like it.
To record all calls download resco audio recorder..Is the best I tried so far.
Allows you to record each call with different audio presets/codecs.
Digitaltigre said:
I've tried it, but to date I haven't had a phone that can record both sides
Click to expand...
Click to collapse
Did you try what I've suggested?

LinoX said:
To enable 2 way recording just change:
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
"VocRecPath"=dword:00000002
and you'll be able to record with any software.
Click to expand...
Click to collapse
You emphasize to change the VocRecPath DWord in the WaveDev key.
But I don't have a VocRecPath DWord.
Does that mean I have to create the DWord?
(Better safe than sorry )

ronh said:
I have created the keys.
Now during a call I can choose record en stop recording.
But I can't find any file back in \documents ?? (help)
Click to expand...
Click to collapse
sorry..I didn't say that calls are recorded like "notes"
look into notes subfolder (i've modified the post)

LinoX said:
sorry..I didn't say that calls are recorded like "notes"
look into notes subfolder (i've modified the post)
Click to expand...
Click to collapse
Sorry, crosspost with my editing: I found that already
But thanx for the reply.
Can you answer my editted question, please?

I emphasized it because I wanted to emphasize that some keys/values are to be created others should be already there (rom dependent).
I don't know why you don't have that value..(compare your rom version with the one on my signature and let us know)
Try creating it, soft reset and see what happen
You should be lucky and everything should work.
You should not damage your phone if you create it
However keep us informed

Creating the DWORD works like a charm.... thanks for the tweak!

When it says dword:00000002, does that mean changing the "Value data" to "2"? Also, do I set the base to binary, decimal, or hexidecimal?
Thanks.

How to access the reg keys in Pro 2
Sorry for asking a dumb question but how in the world one can access the reg edit in TM-TP2?
LinoX said:
To enable 2 way recording just change:
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
"VocRecPath"=dword:00000002
and you'll be able to record with any software.
If you want to use WM6 native recording (WAW only, on \my documents\notes, manual activation: during a call hit "record" on call menu) create:
Code:
[HKEY_LOCAL_MACHINE\System\AudioRecording]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\Microsoft\Voice]
"EnableCallRecordMenuItem"=dword:00000001
"AllowInCallRecording"=dword:00000001
Don't forget to turn off (and on again ) the device after you modify/create the keys.
Tested both on my TP2.
Click to expand...
Click to collapse

this works for me.
make sure u change the save path or u will foud your phones memory
all credit to the creator !!!

This worked for me too. Great!

LinoX said:
To enable 2 way recording just change:
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
"VocRecPath"=dword:00000002
and you'll be able to record with any software.
If you want to use WM6 native recording (WAW only, on \my documents\notes, manual activation: during a call hit "record" on call menu) create:
Code:
[HKEY_LOCAL_MACHINE\System\AudioRecording]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\Microsoft\Voice]
"EnableCallRecordMenuItem"=dword:00000001
"AllowInCallRecording"=dword:00000001
Don't forget to turn off (and on again ) the device after you modify/create the keys.
Tested both on my TP2.
Click to expand...
Click to collapse
I did that and it works perfect !
But, is there a way to change the default recording path "\my documents\notes" to something else ? Like puting it in the storage card...

lepaske said:
I did that and it works perfect !
But, is there a way to change the default recording path "\my documents\notes" to something else ? Like puting it in the storage card...
Click to expand...
Click to collapse
I'd like to know this too.

[Q] FingerKB registry key moved in Mango?

Hi folks,
I found a way to add extra "alternate" keys to the WP7 keyboard. For example, when you press-and-hold on . you get the ability to intead insert ! or ? or -. Now, those are all very nice, but the , key has no such expansion, and there's no easy way to get to the ; ' " keys... so I added them as expansions on the , key.
The problem is, this doesn't work on Mango. I can still apply the changes (using ProvXML) but it seems that the registry key I need to set has moved. Since registry browsing doesn't work anymore, I don't know where that key went.
If somebody can look at a Mango registry dump or something and find out, that would be fantastic. I think the addition of user-switchable keyboard layouts is probably the source of the issue, but I'm not sure. The original provXML (works in NoDo), with path highlighted, is
<characteristic type="HKLM\Software\Microsoft\FingerKB\AlternateMappings">
<parm name="," value=";'"()" datatype="multiplestring" />
</characteristic>

Nobody? I really loved having this tweak on NoDo but without registry browsing I can't tell where it went. If somebody has some way to dump the relevant section of the registry from a Mango phone, that would be much appreciated!