Android 2.1 with HTC SENSE ON WVGA/VGA DEVICES !!(vga needs some fixs)

Android 2.1 with HTC SENSE ON WVGA/VGA DEVICES !!(vga needs some fixs) - Touch HD Android Development

As noone tried to fix android 2.1 codename Espresso, I tried and it works !!
working: (sorry Babijoe, I'm too lazy to write the whole list so I copy/paste it )
* Touchscreen:
* Vibration:
* Capacitive Buttons and Navigation wheel
* Radio
* GPRS
* Microphone works
* Charging
* Market
* Sound
* Gsensor:
* ramzswap
* Android system wide Mic support. Eg: Voice dialer works. Note: You must make a phone call first or play sound before it works for programs. (phhusson)
* Wifi
* did I forget something ? Flashplayer 10.1 of course !! it works but not smooth enough to watch movies !
* Bluetooth : turn ON/OFF pairs and A2DP works! but blac touchpad is desactivated and sound have echo of helicopter ! ALL CREDITS TO PHHUSSON
Not Working:
* Camera/videorecord
* GPS
DOWNLOAD LINKS :
Glemsom zImage kernel autobuild:
http://glemsom.anapnea.net/android/htc-msm-android/
or
zImage modules dirty (a.k.a. without debugging) it seems much faster:
http://balsat.hopto.org/
Base package:
contains startup without overclock cmdline, conf, additionnal apps, initrd, rootfs_3g_pb
http://xda.duttonbiz.com/Base_package/base_package0704.tar.gz
startup config :
contains startups with overclock cmdline
chech 1st post attachment
UPDATE rootfs autobuilds has wifi fix for rhod thx to [ACL] and phhusson
http://xdandroid.southcape.org/rootfs/
Rippped package 14/03/2010
http://www.sendspace.com/file/40t0rr
Rosie package UPDATE 23/04/2010
http://xda.duttonbiz.com/package_hero_rosie_23042010/system2304.sqsh
EDIT: cab install for rhod users thx to Reefermattness
http://forum.xda-developers.com/showthread.php?t=627997
If you like my work please donate
GUIDE
iceman198 did a great step by step with screenshots on howto install this build u can check it here
http://forum.xda-developers.com/showpost.php?p=6132485&postcount=1537
First boot takes about 10 min to boot so be patient
the OS will be smooth after that
CREDITS
thx to all developers that did the whole work and give us the chance to use android as a main OS on non supported HTC devices especialy phhusson, enatefox, nprussell, dzo, zenulator, Paul, [ACL], Chamonix, Stinebd, Makkonen, MrPippy, cr2, Markinus, Babijoe and anyone else who contribute to get this so far
thx to chkms, davidebeatrice, elroy944, kstephens98, Reefermattness, DracoLX for helping me correcting bugs.
thx to iceman198 for hosting my releases
This is from XDA and for XDA so fell free to mod it, or ask for help.
As I'm not a developer I did what I could to have a daily usable OS, so be indulgent
DONATORS
psycho_terror
g3rm0
OLDER RELEASES :
Rosie package UPDATE 19/04/2010
http://xda.duttonbiz.com/package_hero_rosie_19042010/system1904.sqsh
UPDATE 13/04/2010
http://xda.duttonbiz.com/package_hero_rosie_13042010/system1304.sqsh
UPDATE 07/04/2010 fix of market and boot issues
http://xda.duttonbiz.com/package_hero_rosie_07042010/system0704.sqsh
UPDATE 05/04/2010 fix of 3G connexion
http://xda.duttonbiz.com/package_hero_rosie_05042010/system.sqsh
UPDATE 04/04/2010 fix of settings force close
http://xda.duttonbiz.com/package_hero_rosie_04042010/system.sqsh
UPDATE 30/03/2010 REV B fix of htc apps
http://xda.duttonbiz.com/package_hero_rosie_30032010/system300320101revb.sqsh
UPDATE 30/03/2010
http://www.sendspace.com/file/kid8cp
rosie package 29/03/2010 HTC SENSE SIZED
http://www.sendspace.com/file/qmkfbq
rosie package 28/03/2010
http://www.sendspace.com/file/c89tnf
older releases
http://www.4shared.com/dir/32335779/5c5ec6f1/sharing.html
cheers
Klinux

screenshots and youtube video running htc sense
I know you guys you prefer see with your own eyes !
here we go :
thx to whitefalcon for the screenshots
video of this ROM running on WVGA device:
http://www.youtube.com/watch?v=IXd5WC2y6lQ
thx to tomanlam for the video
video of this ROM running on VGA device:
http://www.youtube.com/watch?v=C3kBzSMkX5Y
thx to fastrat350 for the video

changelog
05.03.10 changelog:
- as many of you was confused to what file to use under which folder,
I packed all the neccessary files on one archive see link above
- WIFI supported now
- boot sound removed (I reboot so much so it get me realy ignoyed )
- some mod on system files to support BT in the future
- disable HW3D as the new zImages causes problem booting the system on blackstone
08.03.10 changelog:
-added package with rosie (HTC Sense)
-moded the boot animation
-updated rootfs this should correct other devices keymaps
-added files to support bluetooth on future releases
09.03.10 changelog:
-moded the boot animation it's centered now
-added files to enable bluetooth
-rosie package will be updated later
15.03.10 changelog:
- phhusson corrected the bug with rhod it was a conflict with wifi I added two rootfs one is latest git (rootfs.img) and the second is rootfs with calibration.
- system is more ripped.
- rosie package from htc eris thx to ACL for the link it seems faster than mine, I test it apart some rosie reboots and market everything is fine I will decide which one I will use by default after your feedback
- I added a new file named custom.tar.gz; this file contains the first boot optimization of time so if u can compare how many time it take with and without it will be cool (if u use it with existant data.img it will erase your customizations so be aware )
- don't use custom.tar.gz with rosie package the system will not boot !
-added some apps from xandroid package thx to babijoee
16.03.10 changelog:
- added sms fix from rootfs git all credits to phhusson
- added some mods to fix wifi problem on rootfs git (diam/raph/blac/topaz) rhod owners should wait
I uploded two rootfs: rootfs3Denabled and rootfs3Ddiasbled
- use 3Denabled on diam/raph
- use 3Ddisabled on blackstone
- on tapaz/rhod u can try both and give feedback, cause I don't know if 3D is supported or no
19.03.10 changelog:
- merged rootfs with all fixes
- add auto 3D enable/disable by device
- 3G should be fine for all providers
20.03.10 changelog:
- rootfs for all devices rootfs.img 3D desactivated roll back to the newer ril=phone driver
- rootfs_3G_pbs for those who have problem with their provider (VODAPHONE) with old ril
21.03.10 changelog:
- 1st try to fix britghness
28.03.10 changelog:
- fix for britghness
- new system.sqsh from HERO thread it's more stable and as responsive as on my HERO, I test it during 7h no force close at all !! thx to nprussell for this jewel !!
- market fixed
- google sync fixed
- 2G / 3G switch works thx to phh it force close the phone but works after
- teeter works partialy give it a try it's slugish but as responsive as winmo's one
- 3D gallery works partially but slow
- hexagon home tabs works by tape power button on the main home tab but undersized
29.03.10 changelog:
- 1st htc sense package with sized htc apps thx to [ACL] for the hint to use htc desire apk and thx to paul for the htc desire rom
- it's an alpha version so your feedback will help to fix it
30.03.10 changelog:
- fix for setting
30.03.10 changelog:
- fix of all htc apps FC
- settings could not accessed now
04.04.10 changelog:
- fix of settings Force close
05.04.10 changelog:
- fix of 3G connexion
07.04.10 changelog:
- fix of 3G connexion
- fix of market issue
- fix of loop on boot screen
-wifi still don't work for me test please and post feedback
13.04.10 changelog:
- use eris drivers to make the system smoother and more responsive
- my blac heat way less than before please confirm from youe side
19.04.10 changelog:
1\ ROOTFS
- update rootfs to enable wifi on rhodium thx to [ACL] for his work please test and post feedback
2\SYSTEM
- use eclair drivers to make the system smoother and more responsive
- update bootanimation thx to La3bna and enable boot sound
- add WifiTether to test please my blac's wifi is screwed
23.04.10 changelog:
- use nearly all desire framework this correct a little graphic bug on unlock pattern
- use aderno200 drivers (desire 3d drivers) the only improvement untill now is visible on teeter 1st load

hey k_linux this is unholy from htc-linux, just wanted to let everyone know that this image is fast, i dont know if it will be as fast for you, i have my android at 700mhz, anyways if you want expreso 2.1 look no further.
btw: as you can see iv got a raph so it might work for other devices tooo

any ideas this goes well on diamond

Looks great!
Any idea if you can get wifi working?
Thanks!

sraaj said:
any ideas this goes well on diamond
Click to expand...
Click to collapse
it's so slow on diamond, but you can always try

brodos123 said:
Looks great!
Any idea if you can get wifi working?
Thanks!
Click to expand...
Click to collapse
it worked well when I first try it,
so I think it will be possible in near future

klinux said:
I know you guys you prefer see with your own eyes !
here we go :
Click to expand...
Click to collapse
Hi! thank you!
could you make a systemsqsh from the hero file system please?

Hi
I downloaded the 3 files.
-eclairhero.user.conf
-rootfs.img
-system.sqsh
As I understand I use a haret.exe and startup.txt file from another build?
But what modules/zimage do I use?
the conf file, is it suppose to be directly in root of sd card or in a conf folder?
Also do I use only one fat32 partition?
can I use swap and ext2?
Thanks!!

brodos123 said:
Hi
I downloaded the 3 files.
-eclairhero.user.conf
-rootfs.img
-system.sqsh
As I understand I use a haret.exe and startup.txt file from another build?
Click to expand...
Click to collapse
as haret and startup doesn't change I didn't add it so yes use those from eclair
brodos123 said:
But what modules/zimage do I use?
Click to expand...
Click to collapse
download the latest zImage from glemsom's website
brodos123 said:
the conf file, is it suppose to be directly in root of sd card or in a conf folder?
Click to expand...
Click to collapse
conf file should be on conf directory
brodos123 said:
Also do I use only one fat32 partition?
can I use swap and ext2?
Thanks!!
Click to expand...
Click to collapse
u can use fat32 or ext2 systemfile as the rootfs support both of them
hope this will help
cheers

klinux said:
as haret and startup doesn't change I didn't add it so yes use those from eclair
download the latest zImage from glemsom's website
conf file should be on conf directory
u can use fat32 or ext2 systemfile as the rootfs support both of them
hope this will help
cheers
Click to expand...
Click to collapse
Thanks klinux!!

So is this with proper scaling, like, native 840x400 reso?
I was thinking of trying to port the Desire's sense UI btw..

Powerbik said:
So is this with proper scaling, like, native 840x400 reso?
I was thinking of trying to port the Desire's sense UI btw..
Click to expand...
Click to collapse
I ripped all unscalled htc's apk so we have OS with correct resolution, by the way if you can port the Desire sense apk it's always welcome !

klinux said:
I ripped all unscalled htc's apk so we have OS with correct resolution, by the way if you can port the Desire sense apk it's always welcome !
Click to expand...
Click to collapse
Hah, I'm no expert, faaaar from. I want to give it a shot any of these days though.

maybe you should include to add a initrd.gz in the 1st post, wouldnt boot otherwise ("reboot in 7 seconds" and then freeze)
im looking at the boot animation as i write X=)

N!ghty said:
maybe you should include to add a initrd.gz in the 1st post, wouldnt boot otherwise ("reboot in 7 seconds" and then freeze)
im looking at the boot animation as i write X=)
Click to expand...
Click to collapse
ok, guys I will make complete package with all files, as I write now I'm fiwing wifi issues and BT!
stay tuned
cheers

klinux said:
ok, guys I will make complete package with all files, as I write now I'm fiwing wifi issues and BT!
stay tuned
cheers
Click to expand...
Click to collapse
I'm just downloading the components myself (as you described, and putting them all together.... should take me an hour or so).... I'll play with it, and if it's working, I'll make an installer cab and release it... with credits to you of course.
What's not entirely clear is, is this Blackstone only? Of late, my releases have been device agnostic (and the installer supplies the correct startup.txt file for any given device).
My Android skills are limited, so any help on which devices are supported would be great.
Also, nobody's ever gotten around to giving a GOOD description of the function of each component...
e.g.
zImage - linux kernel (the absolute 'hub' of the linux OS)
modules.xxx.xx - additional files required by kernel.
initrd.gz <--- unclear what this is
system.sqsh <--- what IS this actually storing.... is it Android or is it customisation or is it both??
rootfs.img <--- what's this?
conf\xxx.conf <---- this is also unclear
Now don't get me wrong, conf is clear that it's helping the OS know where certain partitions are, and how to behave in terms of pagefiles etc etc, but the naming convention isn't clear or why it changes name (why's it not android.conf?)
Any info on this would be superb since I'd like to add it to my FAQ.

Could only get as far as the Hero logo (displayed towards top left of screen)... heard the Hero startup sound and the anim, then the screen stays in a loop of the animation and startup sound.... left for 3 mins the same....
Have to do a new build of something else before I return to this (so will be half a day now)... but will definitely come back to this

it looks great, worthy of giving a try, thanks...

Related

CyanogenMod 6 Kaiser [RLS5.2] - RC2 based, odex:ed build [6.8.2010]

CyanogenMod 6 Kaiser [RLS5.2] - RC2 based, odex:ed build [6.8.2010]
This release is based on CyanogenMod 6 RC2, modified to be Kaiser & Polaris friendly (and hopefully Vogue too). Parts of other releases, mostly dzo's Fresh Froyo are also used.
What's new:
RLS5.1:
- Completely re-done release, based on CyanogenMod 6 RC2 FRF91
- System completely odex:ed (thanks kallt_kaffe for all your help with this)
- Google Apps FRF91 MDPI
- Wifi tethering - courtesy of urban69 and kallt_kaffe.
- Removed most of the "bonus" apps except Astro File Manager, due to /system size limit. To get YR Weather Widget, Brut Maps, Linpack or Nexusrevamped Live Walpaper dowload the AppPack.zip here, unzip the files to your SD card and install via Astro..
- Experimental libhtcgeneric-ril.so to enable 2G/3G switching (again all credits to kallt_kaffe) included. The enable/disable "2G mode only" switch in settings now works!!
For best performance enable compcache in Settings > CyanogenMod Settings > Performance. If you want to squeeze even more out of it disable dithering, also in Settings > CyanogenMod Settings > Performance.
Download RLS5.1: Mediafire, FileFactory or Megaupload!
Update RLS5.2
-New version of experimental libhtcgeneric-ril.so to enable 2G/3G switching (again all credits to kallt_kaffe) included
RLS5 and RLS5.1 can be updated to RLS5.2 via update attached below: rls5_rls5-2_update.zip.
What works:
Everything should be working as in other Froyo builds. But I may have missed someting - if so, please report!
- Phone: calls, SMS, standard stuff..
- Camera
- BT & BT audio
- Wifi
- Email
- MMS
- Exchange sync, Google sync
- Market
- GPS & Wireless (WiFi or Data) location
- JIT
- Compacache
- et cetera..
Installation:
Put the androidinstall.tar to /andboot folder and install to SD / NAND. SD users will find complete SD HaRET distro attached below, with zImage-froyo-26-07-10 (HaRET.zip). Edit default.txt according to your needs and wishes, but it should be o.k. for most Kaiser users (except panel and battery parameters - fix those). Polaris users should edit default-polaris.txt for Polaris. Vogue users need to use their standard default.txt.
I've tested RC5 on SD (ext2/ext2) install, so I really don't know how it will work on NAND.
If you have problems with Wifi connections, you can try other power levels using script made by kallt_kaffe:
Code:
$ sudo
# wifi_level.sh low|medium|high
To switch between Froyo | Eclair | Paid Market, use a script market.sh, made by kallt_kaffe:
Code:
$ su
# market.sh eclair|froyo|paid
There is a small DeskClock.apk issue in RLS5.X. To get back DeskClock.apk from RLS4, which is o.k. for our resolution, apply attached DeskClock_fix.zip.
Screenshots:
Check them out at CyanogenMod 6 screens page.
Credits go to:
- mssmision for porting CyanogenMod 6 for our devices and all the other work his done
- dzo for his kernels and Froyo releases - without you man there would be no Vogue/Kaiser Android community
- kallt_kaffe for many many contributions he made to Android Vogue/Kaiser community
- Incubus26Jc also for his fine builds and many contributions made to Android Vogue/Kaiser community
- Brut.all for his Maps mod
- DmK75 for the default.txt for Polaris and all the other contributions his done in testing and delivering fixes for this build. Thx man!
- Complete Vogue/Kaiser community
Thank you guys for your great work and sorry for stealing your ideas and soultions, but they're just to tempting not to be used and abused.
I'd be glad to get as much of your feedback as possible. Enjoy!
============================================================
History
RLS4:
- Fixed bootanimation to comply with 240x320 res, also slimmed down bootanimation.zip by 1 Mb
- Replaced all Google Apps with the FRF91-mdpi version
- Updated ADW Launcher to latest version 1.0.1-mdpi
- Removed LinPack
- Included updates from RLS3 in the main build
- Other smaller modifications and optimizations
RLS3:
- Replaced old Vending.apk with a new one from FRF91 source to fix constant FC'ing
- Replaced some other system resources with FRF91 source
- Updated ADW Launcher to latest version 1.0.1
- PNG'optimized and zippaligned all apk's - shaved ~ 10-15% off in average
- Optimized all OGG files - shaved 20-30% off in average (you shouldn't, but if you notice any drop in ringtones quality, please inform me)
- Included Brut Maps, Astro, NexusRevamped LiveWalpaper and LinPack in the release, on the account of newly freed space
- New kernel zImage-froyo-26-07-10 added to HaRET.zip
- Included Wifi tethering fixes made by kallt_kaffe (thx man, great work). No more post installations scripts needed to make it work.

Nice work! Sometime I will try this build.

Just about the best i've tried yet.
This is by far the most responsive version i've tried yet and i've spent about two days trying all the versions mentioned in the
"Android Build Index - Look here before asking" -I can't post the link-
I'm trying this on NAND. I can't get Wifi to work on my kaiser but i'm going to keep playing around with this one.
Love the speed.
Oh, what is the name of the female football picture/wallpaper?

Hi,
I will try it on my Pola.
This build is useful for using bluetooth speakerphone in car?

Chick wallpaper.
http://bit.ly/acABBj

wifi won't start. It just states "error"

@nemuro are you a Kaiser or Polaris user and did you apply my update?

Best yet!!
I'm not sure how, but Wifi is now working. It may have something to do with fixing permisions between a re-install. This version is quick and snappy. My favourite so far!!!

milanche said:
If you find any problems, please report..
Click to expand...
Click to collapse
Where i install update, i seen message "tar: short read"
Is error?

DmK75 said:
Where i install update, i seen message "tar: short read"
Is error?
Click to expand...
Click to collapse
No. It installed fine, don't worry! I get that error too, it has something to do with the way 7Zip I use makes tarballs, but it has no effect on install.

milanche said:
@nemuro are you a Kaiser or Polaris user and did you apply my update?
Click to expand...
Click to collapse
Yes, I applied the update. I am using kaiser, and haret + latest z-image. Is it the problem that I am using a wrong version of default.txt? Do you want me to post that file?

Gonna try it tonight...
Ive been using urban69's rom for 5 days and have enjoyed it although am having application fc's frequently and still dealing with the battery issues....I'll try this on Nand tonight and reply back....Thanks for all your work!!!
If it weren't for all of you dev's we'd be in tech limbo!!!

First of all...Im new to installing Android on Kaiser, so sorry for stupid q's and stuff...
Ive installed it on a danish Tytn II, it works, with some errors...
1. Wifi doesnt work(dont know why...just doesnt find any networks(and it seems to have no macaddress, at least thats what the infobox says, the same about bluetooth)
2. No marked...Weird i think
3. Battery stuck at 15%
4. i sometimes have problems answering calls...
Think that was it for now...Else its a great build...Thx a lot..
THink i will install another build for now...but will probably try it again...

milanche said:
No. It installed fine, don't worry! I get that error too, it has something to do with the way 7Zip I use makes tarballs, but it has no effect on install.
Click to expand...
Click to collapse
Thank for this build!
I install it on my Polaris and tested: Wifi, BT and GPS works.
Also i noticed full russian translate and working superuser app!
One issue in Market, it sometimes "stopped unexpectedly".

nemuro said:
Yes, I applied the update. I am using kaiser, and haret + latest z-image. Is it the problem that I am using a wrong version of default.txt? Do you want me to post that file?
Click to expand...
Click to collapse
Please try my latest release where all needed HaRET files are included. And don't forget to change panel type in default.txt to correspond your panel!

Zalasta said:
First of all...Im new to installing Android on Kaiser, so sorry for stupid q's and stuff...
Ive installed it on a danish Tytn II, it works, with some errors...
1. Wifi doesnt work(dont know why...just doesnt find any networks(and it seems to have no macaddress, at least thats what the infobox says, the same about bluetooth)
2. No marked...Weird i think
3. Battery stuck at 15%
4. i sometimes have problems answering calls...
Think that was it for now...Else its a great build...Thx a lot..
THink i will install another build for now...but will probably try it again...
Click to expand...
Click to collapse
That's weird. I have Wifi and BT working. Please download the new full SD HaRET release from first post and see how this one works for you. It has all needed files included, including latest 15-7 kernel.

Added new complete androidinstall.tar release to first post!

doesn't work on nand, it's too fat to be installed in nand... the update fails with no space left on device as does the new androidinstall
i guess something needs to be took off to install in nand

milanche said:
If someone is kind enough to send me default.txt for Polaris, I'll be glad to include it!
Click to expand...
Click to collapse
Here default.txt for Polaris, i use it.

DmK75 said:
One issue in Market, it sometimes "stopped unexpectedly".
Click to expand...
Click to collapse
Yes, I have the same problem. Will look into it.
DmK75 said:
Here default.txt for Polaris, i use it.
Click to expand...
Click to collapse
Thank you very much! Will include it into next release.
succo said:
doesn't work on nand, it's too fat to be installed in nand... the update fails with no space left on device as does the new androidinstall
i guess something needs to be took off to install in nand
Click to expand...
Click to collapse
Ok, thanx. I'll look into it.

[FIXED: 3d support for wvga] - 3d working for Blackstone (fix from OliWe)

hi,
well, maybe the next GREATEST NEWS !!!!!
3d is working now. (all honor to OliWe)
the patch is included in latest rootfs - so the download is not needed any more ...
(in latest rootfs - there are 2 gralloc files (gralloc.msm7k.so + gralloc.msm7k_wvga.so)
and in latest rootfs it does mounting the wvga version over the normal gralloc lib -> done via *init* script.
ex: via:
mount --bind /sdcard/gralloc.msm7k_wvga.so /system/lib/hw/gralloc.msm7k.so
then the system use the patched version.
# # #
downloading is not needed any more ..
cu camel
Code:
OLD POSTING
but we must be sure if someone have problem - please help on testing ..
for testing ...
if someone wants to mount the rootfs and replace the [B]gralloc.msm7k.so[/B] file .. see attached file which must be replaced in the system.
it should be replaced in
/lib/froyo/hw
/lib/eclair/hw
system/lib/hw
(the file rights should be 777)
PLS: honor goes to OliWe - i'm only the slave

it is working i can see bootanimation android pissing on apple.good job people

Great work!
Boot animation is working!!

Is this working on other devices too? (Like Topaz, tp2 etc?)
I just downloaded the Rootfs.img from first post and Gallery is still laggy on my topaz.

lobfredd said:
Is this working on other devices too? (Like Topaz, tp2 etc?)
I just downloaded the Rootfs.img from first post and Gallery is still laggy on my topaz.
Click to expand...
Click to collapse
The fix will not work on Rhod/Topaz. It's made for Blackstone ,(probably Kovsky) and the vga devices.
@all: It would be nice, if you could test some 3D games. Please post your results

I'm getting the boot animation now so something is changed for sure. Considering games: anything in particular u can recommend for 3d testing purposes?
Thanks for the TouchScreen fix too - u're really advancing this project in regards to the Blackstone - great work

WOW !!!!
Boot animation working very nice ... thank you !!!!!

Now fix only the camera and the battery problem
Thank you for your hard work!!!

Great fix dude, bootanimation and gallery3D working fluent on froyo

Great Work OliWe!!
Great work OliWe without you we would not be at this stage in Android development.
Oh Camro, i cant seem to download the Rootfs file from Rapidshare. I't keeps failing when i download the file.
can you re-upload the link please, thanks!!

WM6_TG01 said:
Great work OliWe without you we would not be at this stage in Android development.
Oh Camro, i cant seem to download the Rootfs file from Rapidshare. I't keeps failing when i download the file.
can you re-upload the link please, thanks!!
Click to expand...
Click to collapse
donwload file is working for me . please retry - haven't changed anything ..

camro said:
donwload file is working for me . please retry - haven't changed anything ..
Click to expand...
Click to collapse
confirmed the download is working just did without any problems
now to get the android working

Works perfect!!
THANKS

Oliwe....
Working fine for me on Blackstone, congratulations, BUT...
what are the effects on other devices. I read your statement that the 3D fix is for blackstone only, but will this prevent other devices working? or is it just no 3D support for them?
I ask this, because the releases I package are generic releases for multiple devices and therefore I'd still like to use one rootfs for all devices.
Once again, great work, and another milestone for Froyo ports!

Thank you OliWe for this great fix!!!! I've just finished to run Neocore Benchmark on my blackstone (at stock clock...) and my result is 14.9 FPS...not so bad...anyway i will redo this bench after a little overcklock and i'll update my result!!!!
Edit: little overclock (614 MHz)..result=18.4!!!

camro said:
hi,
well, maybe the next GREATEST NEWS !!!!!
3d is working now. (all honor to OliWe)
but we must be sure if someone have problem - please help on testing ..
for testing ...
if someone wants to mount the rootfs and replace the gralloc.msm7k.so file .. see attached file which must be replaced in the system.
it should be replaced in
/lib/froyo/hw
/lib/eclair/hw
system/lib/hw
(the file rights should be 777)
or if you want to use the whole rootfs system.
link
PLS: honor goes to OliWe - i'm only the slave
Click to expand...
Click to collapse
Can not play Asphalt5, when run it, it close itself,I don't know if this is the 3D issue?
Thanks for the Great work.

TheBrilliantMistake said:
Oliwe....
Working fine for me on Blackstone, congratulations, BUT...
what are the effects on other devices. I read your statement that the 3D fix is for blackstone only, but will this prevent other devices working? or is it just no 3D support for them?
I ask this, because the releases I package are generic releases for multiple devices and therefore I'd still like to use one rootfs for all devices.
Once again, great work, and another milestone for Froyo ports!
Click to expand...
Click to collapse
Here is what we know:
- It will work for Blackstone / Kovsky
- It won't change anything on Rhod/Topaz (they have no 3D)
- It should work on Diam/Raph (in theory), but no one tested it yet
All in all, you should get some vga testers before releasing it

Oliwe you're the best!!!
Neo core benchmark 11.1 fps

Heavy Gunner - crashes on download screen (but at least it gets there, couldn't get to it before).
Crush the Castle - works now as opposed to before where it just quit. Laggy, but at least its working
Nova crashes on downloading packages.

Insaneboy said:
Heavy Gunner - crashes on download screen (but at least it gets there, couldn't get to it before).
Crush the Castle - works now as opposed to before where it just quit. Laggy, but at least its working
Nova crashes on downloading packages.
Click to expand...
Click to collapse
I can't find theese games in the Market...why??...anyway....done another benchmark..Quadrant standard=501 (blackstone clocked to 633MHz (unluckily this is the max freq i can reach whit stable OS)...

[03-09-2010][CyanogenMod 5.0.8][VaniljEclair-Port FINAL V1.1][Neopeek]

The last days Froyo rubbed all my nerves. As promised earlier to a few members I decided to update CM5-builds. And here is the first Final release of my Eclair-builds:
VaniljEclair from kalt_kaffe (original thread from HTC Kaiser)
Changelog:
[*]V1.1 is a 1-file-download. The ZIP-Archive contains everything you need!
What's Included:
Latest LauncherPro
Compcache activated
Browser removed and replaced by Dolphin Browser HD
Performance tuning
[*]1-file-download due to FINAL release V1.1 -> read Install Instructions carefully!
To get the full performance out of all my builds you have to open all apps once and then restart your device 1-2x times
Known Bugs:
Camera is broken
If you wake up your device and the screen stays black -> just slide from left to right as you would do when unlocking the phone -> The display will wake up immediately.
Used sources for this Port:
kalt_kaffe's VaniljEclair ROM for HTC Kaiser
XDAndroid: rootfs + kernel (2.6.27)
Credits go to: Cyanogen + Cyanogen-Team, kalt_kaffe, XDAndroid-Project, Balsat and top everyone else whom I have forgot! You may consider a donation to all of 'em!
Download + Installation Instructions (read carefully):
Neopeek's VaniljEclair-Port CyanogenMod 5.0.8
RE-EDIT: This Text is copy&paste for all threads on all compatible devices! Everything works fine for my Diamond. I still have no other device then a Diamond. I am still a one-man-show regarding my Android-Ports. So don't blame me for anything that doesn't work for you on any other device...

thank you very much

Can you post some screens please....

Hi vatoloco,
I couldn't see anything run on my Blackstone,always show black screen.
Thanks for the good work

mike86_tsai said:
Hi vatoloco,
I couldn't see anything run on my Blackstone,always show black screen.
Thanks for the good work
Click to expand...
Click to collapse
me too,it`s always show black screen

try turning off 3d in startup...

vatoloco said:
try turning off 3d in startup...
Click to expand...
Click to collapse
How can i do it? where?

always black screen, what to do?

Finally, I can see the main screen, just follow the below setting
Originally Posted by NemanjaLO View Post
Got it WORKING without force close!!!
Before first boot edit your startup.txt and add this to "set cmdline" "hw3d.force=1" and keep TouchFlo running in WinMo. You also need to disable boot animation in tar.gz package: For this you need linux system, open your archive in linux and find init.eclair.rc file in init.cfg folder and disable this lines:
#service bootanim /system/bin/bootanimation
# user graphics
# group graphics
# disabled
# oneshot
But after boot , I could turn on the wifi,but couldn't get ip.
GPRS ok.
Bluetooth ok,but the voice have a lot of noise,microphone ok.
GPS ok.
speed is good.
Thanks for the good work

you dont have to do that anymore, hw3d is working, but gralloc from the "hw3d thread" has to be replaced to /lib/eclair/hw/ & /system/lib/hw/ and also for me wifi wont work if i use updated kernel. so i extract wlan.ko from the modules and place it to /system/lib/modules/ ...
overall the build seems stable.
# I get 16.5 fps on neocore benchmark. (pretty decent i believe)
#However i am facing issues with wifi not able to get dhcp address (have to set static)
# google talk and gmail app aint working (force close). need to probably replace the apps. (not sure)
thanks neopeek.

vatoloco said:
Camera is broken
Click to expand...
Click to collapse
Means: Not working or really broken???

First post updated with V1.1
Broken means not working!

For those who got this release working .
can you upload the files that you had to modify (startup,tar.gz...) , so it would be a more easier process for non-experienced users to download this release and run it by one button ..
thanks in advance .

Where's the problem, huh? Move to npkinstall-folder. rename diamond.txt to startup.txt there! Start install.exe! After installation move to startups-folder and copy startup.txt from diamond where haret.exe is and simply run haret.exe! That's all! Sometimes I ask myself if someone misses reading my instructions. I think renaming 1 txt-file and copying 1 txt-file should be simple enough!
That's 2 steps!

Neopeek,
For blacstone users, need to replace the gralloc file in your builds to get the hw3d working. which if not done gives black screen and 3d is not enabled.

Neopeek,
For blacstone users, need to replace the gralloc file in your builds to get the hw3d working. which if not done gives black screen and 3d is not enabled.
Click to expand...
Click to collapse
...but boots up for you w/o that gralloc? So kindly link me to that gralloc so I can implement it. But first if it boots up just let me know if everything else works or something Blackstone-specific still needs a fix. Damn it! I have no Blackstone. SO I need you to test and give me hints!

I'm going to format to ext2 partition to try
Many thanks for the chance to get android on my blackstone man

I already downloaded the v1.1,but when I run the installer, the system show it will formate my ext2 partition,and then say cann't open xxxx.tar.gz,when show reboot in 7 seconds.But nothing happen after 7 seconds.
When I reboot manually,I found all of the android I in my card was gone,it empty because the sdcard already be formate during the installer running.I try two times the result is the same.
Fix already,It's my problem, I don't know why between the ext2 and fat32, there is 7.8MB no use, so after I repartition my sdcard, now is ok to install the file.
After waiting over 20 minutes, still black screen.

Neopeek,
For blacstone users, need to replace the gralloc file in your builds to get the hw3d working. which if not done gives black screen and 3d is not enabled.
Click to expand...
Click to collapse
I think I have to include this for you to get it working for you. On the other side you may try to set "hw3d.force=0" in startup.txt. Thanx indeed for testing!

Yes, after replace the gralloc.msm7k.so that from hw3d thread, now it boot ok. after boot the wifi is also no problem to get ip.

[31 DEC] gauner1986's HD-FI 0.3 (Desire HD based) [KERNEL = my own :)]

So.. MAGLDR is finally out. I'd like to give away the stuff i've put my love in in the last few months while testing MAGLDR. Without neat release pictures (I'm bad at marketing, i'm the software guy, sorry..)
This is the latest version of Desire HD Sense FRG83D (very close to stock). Basically everything is working and I have been using it for a while now.
It's a little slower than most Desire ROMs (though you get neat benchmark scores; NOTE: Benchmark scores are usually lower than the ones from SD builds,
because NAND writes are slower), but that pays off feature wise in my opinion. See for yourself.
I have squashfsed the app and framework directory, which saves a lot of space. (Desire HD ROMs are very space hungry). Finally got it down to use only 230 MB + (6MB free in /system, because mkyaffs2image does strange stuff), which means you will have 184MB of storage space available for your user files (if you use the partitioning layout I supplied with the DFT flasher and depending on if you chose to use the EXTROM area/last 24 MB of NAND space in MAGLDR - if you have a TMOUS LEO you will of course have more).
Things i have removed (i can remember..):
Maps (it's an outdated version anyway - download a new version from Market)
eReader stuff + eBooks (takes 50 MB or so - WTF, not worth it)
Not sure if all languages are working, because I removed some of the language dependend stuff, except for German and English.. Has to be tested. <- should be working according to users.
Notes:
This ROM comes as ODEX-ROM, because that again saves a lot of space, which would otherwise be taken twice (once in davlik cache and once in /system/app / system/framework)
If you want SuperUser, install the superuser app from market. I'm not sure if i am allowed to just include it in my ROM. (0.2 has superuser app pre-installed)
My own kernel is included, based on the latest linux_on_wince_htc git. It has the SMARTASS and INTERACTIVE governor as well as an undervolt (925 mV) (no UV in 0.2 anymore).
Of course this ROM comes with RMNET enabled. My version of the libhtc_ril_wrapper allows you to choose between PPP and RMNET by file. If /system/ppp exists (create it with touch /system/ppp) then PPP will be used, otherwise RMNET. RMNET is working quite well, so i would suggest you use that.
If you want notifications working, install Led me know from market. I had battery drainage issues with it, so i removed it.
If you still experience problems with the Browser just closing, or crashing, install Flash player from Market
Due to the squashfsed app and framework directory you will NOT be able to write into /system/framework and /system/app. If you want to change sth there you need to extract my ROM and unpack squashed.sqsh, make your changes and put everything back. I won't explain it in detail here. Use google if you want to know more, or search the forum.
The MAC address of the WIFI interface can't be read correctly, nor changed at the moment. We need to wait for Cotulla to implement it in MAGLDR. <- MAC address can be changed temporarily. See here. Thanks to clio94 for posting this.
Known issues:
There is some issue with dexopt running for the apk's in /data/app on every boot atm, which i was not able to solve yet.. (You see a lot of Pruning dalvik file.... in logcat, making bootup slow, if you have a lot of apps installed)
Maybe someone else can help out on this?
On some languages you can't add cities to the weather widget/app. Switch to English if you want to do that as a workaround, you can switch back afterwards again.
htcsense.com features are not working currently - dunno what causes this; Maybe it's HTCs fault
If you think the ROM is slow.. Wait at least one hour after you installed and configured all your stuff before judging! ROM is syncing and configuring a lot of stuff after initial setup!
Download:
Version 0.3 -> Multiupload; BACK UP YOUR STUFF BEFORE FLASHING if you use a previous version to be sure!
Code:
Changelog in v 0.3:
- Squashfsed more directories - gives us a LOT of space.. System footprint now is 209 MB; you should have more userdata space available!
- Fixed issues with browser closing while loading flash vids - test it please
- Added HTC Location widget
- Added News reader widget
- Standard kernel included; optional overclock kernel (1113 Mhz) in the release package; if you want to use it, replace the zImage in /system with the zImage in release package
Version 0.2 -> Multiupload
Mirrors (thanks to fakker/noobhands):
http://box.noobhands.com/magldr/gauner1986hd-finand0.2.7z
http://box2.noobhands.com/magldr/gauner1986hd-finand0.2.7z
http://box3.noobhands.com/magldr/gauner1986hd-finand0.2.7z
http://box4.noobhands.com/magldr/gauner1986hd-finand0.2.7z
http://box5.noobhands.com/magldr/gauner1986hd-finand0.2.7z
http://box6.noobhands.com/magldr/gauner1986hd-finand0.2.7z
Click to expand...
Click to collapse
Code:
Changelog in v 0.2:
- Removed undervolting
- Superuser app now pre-installed; Any crashes or other problems with this should be fixed now!
- RMNET module now is no longer loaded if you chose to use PPP (to use PPP instead of RMNET create an empty file ppp in /system)
Version 0.1 -> Multiupload
Important:
To all those having trouble flashing the ROM with Cotulla's flasher
Please go to Cotulla's thread and ask for help there, this is not the place for this.
Instructions taken from Cotulla:
1. download MAGLDR 1.10
2. download NAND Android ROM
3. Install MAGLDR to your LEO (ROMUpdateUtility.exe)
4. Boot LEO and select in the menu "4. USB Flasher"
5. Run DAF.exe on your computer. Do all steps.
6. Wait while it's flashing.
7. After flashing device will make auto-reset.
8. It should boot directly to Android.
9. If any errors happens, please report in Cotulla's thread, which is here.
Click to expand...
Click to collapse
So finally i want to thank some people.. Without you that all would not have been possible.
* Cotulla: for his great MAGLDR and trusting me while testing it.
* mdeejay: for supplying me with userspace stuff.
* Markinus, LeTama, Rajko and all the other great devs from #htc-linux who contributed
* Everyone else I forgot
If you want to buy me a beer you can do so by clicking the link in my signature. I put a lot of time in all this.
And of course buy Cotulla a beer, without him we wouldn't have come so far in that little time!

You know I want a working Desire HD ROM, don't you, you little tease
Keep up the good work my man. I shall follow this thread with mighty salivation.

jesus...
i cant choose which to d/l first!!! =P
great work guys!!!

Can't wait! Thanks so much guys for your hard work.

Thanks, looking forward to this one
I just sent some beer your way, do you happen to know donation details for Cotulla/DFT?

Happy new years
So much thank you all for giving this gift to us!

I'll test it in minutes
gauner1986, HI-FI man how's unlock time on your build usually on desire hd builds it is 3 seconds... to much

drooling already.... more and more familiar names here...

could anyone explain this for me ??
"(if you use the partitioning layout I supplied with the DFT flasher and depending on if you chose to use the EXTROM area/last 24 MB of NAND space in MAGLDR)."
i found an option "UseLast24NAND" but what does that mean ?! ..ooouuuh Im so confused with all these unknown words

Whooohooo I'm excited for this!

can you upload before newyear

As an user of MDJ's Desire HD builds I can't wait for this

it' working great! thx gauner1986

six-one said:
it' working great! thx gauner1986
Click to expand...
Click to collapse
you already got this rom ?? I thought, download-link is not released yet.

six-one said:
it' working great! thx gauner1986
Click to expand...
Click to collapse
wow it's not upped and you know how it works

lol. No it's not out yet. ETA is 40 mins, i'm uploading. Had to fix a problem

gauner1986 said:
lol. No it's not out yet. ETA is 40 mins, i'm uploading. Had to fix a problem
Click to expand...
Click to collapse
Gauner,i am not sure if you did read my pm,but is the 'problem' also busybox problem ?
I cannot get root acces with titanium backup in cotulla's nand build because of missing busybox,which i cannot install.
Hope you maybey can help

Great build, everything looks awesome. Haven't tried busybox yet.
Thanks gauner

pkchips said:
Great build, everything looks awesome. Haven't tried busybox yet.
Thanks gauner
Click to expand...
Click to collapse
What the hell its not even out yet... its not even a build!! *walks away shaking head*

gauner1986 said:
lol. No it's not out yet. ETA is 40 mins, i'm uploading. Had to fix a problem
Click to expand...
Click to collapse
*lol* back
ich weiß was das heißt, wenn ein Programmierer sagt: Es dauert nur noch gahaaanz kurz... max. 40 min...

[DEV][PLEASE_CONTINUE][Sense 4.1]Common Sense

Well, here we go...
This is not the way I wanted to post this thread, but fate was stronger than me
Guys, I spent last several months working on a stable Sense 4.1 base for our HD2. I succeeded in a lot of things. I got BT working. I got mic working in applications. I got this damn thing running smoother than my wife's Galaxy S3 (I'm not kidding)...
So, yesterday my HD2 died on me. For the second time. I can't afford to fix it anymore, I don't have neither time nor money for that. Mainly time... So, unfortunately, I have to stop the development right here.
Someone, please take it from here. It would be a real pity for me if this ROM died together with my HD2.
Guys, as you can see further in this thread, someone donated a fully working HD2 to me. Just like that. For free.
If you ask me, this is an act of an incredible generousity.
Thanks a million, Legion.X. I'm still to find a way to thank you.
Let the development continue!
Introducing Common Sense 4.1
link to ver. 0.2:
http://www.mediafire.com/download/75m6jwtcq28gg8u/CommonSense41_next.zip
please test and comment.
previous versions:
ver 0.1: https://mega.co.nz/#!WhpRzJQa!DOdybh...6N52mPTfNkXk1k
what works:
* full Sense 4.1. almost everything works. daily driver.
* silky smooth, as good as native. flies at 20-30FPS with live wallpaper, probably around 60FPS with still wallpaper
* fast and snappy.
* sound recording works. voice input works. BT works.
* full 3D Rosie
* live wallpapers, Sense lockscreens etc.
* EXT2 over YAFFS loop (works automatically out of the box)
* should be snappier than ver. 0.1
known problems:
* it does reboot randomly from time to time. I'm looking for ways to solve these... looks like we'll end up recompiling libs from source.
ANYONE WHO HAS EXPERIENCE AND/OR WORKING ENVIRONMENT TO RECOMPILE FILES FROM SOURCE, PLEASE PM ME. My goal is to take gralloc sources from CM9 and adapt them for sense. but I don't have linux and don't have the toolchain set up. I'd appreciate any help with this.
* probably won't work in full NAND on TMOUS. anyone who wishes to participate, please try to install on TMOUS without sd-ext and report what you get. logcats are most welcome!
* WiFi router doesn't work. Custom routers from Play Store should work.
* Video shooting works at 15FPS. Don't know if that can be fixed... for me 15FPS is fine anyway
next steps:
* hopefully fix some of the crashes
* fix terrible lags during initial configuration and in the setup wizard
* improve Rosie (I know how to make it even smoother )
* try crossbreeder
* install XPosed framework
* please suggest more things to improve!
installation:
* BACKUP!!!
* IMPORTANT: you need CWM 3.0.0.6.. Other recoveries may or may not work. voronkov_pavel reports that CWM touch recovery beta 8 does not work with this ROM.
* REMEMBER: for Data On Ext, keep your system partition small! philliped364 reports that 55MB works just fine
* install Common Sense from recovery
* reboot. the first boot will take a while (although it's waaaay faster than in other ROMs thanks to odexing). should boot in 2-3 minutes. if it doesn't boot within 10 minutes, please report
* wait for the lockscreen to appear. DON'T PULL THE RING YET!
* make some coffee. let your HD2 settle down for at least half an hour
* pull the ring to unlock. if the setup wizard does not appear immediately, don't touch the device for another half an hour. if the device reboots by itself, please report.
* complete the setup wizard. it will lag. please be patient. DON'T SIGN IN TO YOUR GOOGLE ACCOUNT YET! finish the wizard and let Sense load.
* wait for two minutes and reboot
* let it settle down for another half an hour. it will optimize the databases during that phase. don't try to work with the device. it will lag terribly.
* unlock, go to Settings -> developer's settings, scroll down, disable "force GPU rendering"
* reboot
* your device should be fully functional now. now go to Settings -> accounts and sign it to your google account, email and whatever you like
big thanks to Legion.X (for sending me his HD2 for free), philliped346 (for his immense help and making my ROM nativeSD), saurabhrendale (for his incredible animations), Mr Evil (for letting me kang sound files from his EvoHD2 ROM), ckpv5 (for letting me kang Sense files from his MyOneDx ROM), dorimanx (for his kernel), RobbieP, ya5, aazzam16661, Daekin and many, many others for helping me out.
Some technical details about the ROM:
Config: Data on Ext, DB on NAND, looped over EXT2.
System: mostly taken from other Sense 4.1 devices, proprietary files taken from several half-working Sense 4.x ROMs flying around here. Sound system taken from EvoHD2 ROM (yeah, CM9). Credits to Mr Evil for these files.
Kernel: Dorimanx 7.2 HWA (credits to Dori please)
Framework: stock Desire X ROM as a base, heavily modified to work with CM9 sound system, heavily optimized for smoothness.
Sense: mostly myONEdx RC4.0 FX+ ROM. Rosie modified by me. Some files taken from stock Desire X ROM.
A word about kanging:
my goal is to create a stable Sense 4.1 base for HD2. feel free to kang anything you find here. just please PLEASE give proper credits. don't forget the guys who gave me some of the files: Mr Evil (creator of the EvoHD2 ROM) and ckpv5 (creator of the MyOneDx ROM)
NOTE for DEVs:
I was stunned to discover that DISABLING HW acceleration makes scrolling silky-smooth in 99% of the applications. Exceptions are: Rosie, Browser and... uh... that's it, I think. So, I REVERSED the way framework enables HW acceleration. Here's how: if the application doesn't request HW acceleration, it doesn't get it by default. If it requests it (HWAcceleration=true in the manifest), it DOESN'T get it either. If hwAcceleration=false in manifest, it DOES get it. This way, I only had to modify Rosie and the Browser and set hwAcceleration=false for them to actually GET the acceleration. The other apps just denied the acceleration natively. Please be aware of this change
Enjoy.
Report bugs.
May the Force be with you

thelonewolf_pav said:
Well, here we go...
This is not the way I wanted to post this thread, but fate was stronger than me
Guys, I spent last several months working on a stable Sense 4.1 base for our HD2. I succeeded in a lot of things. I got BT working. I got mic working in applications. I got this damn thing running smoother than my wife's Galaxy S3 (I'm not kidding)...
So, yesterday my HD2 died on me. For the second time. I can't afford to fix it anymore, I don't have neither time nor money for that. Mainly time... So, unfortunately, I have to stop the development right here.
Someone, please take it from here. It would be a real pity for me if this ROM died together with my HD2.
Here's the link. Enjoy.
http://d-h.st/7MZ
Disclaimer:
Frankly, I don't even know if it boots the way it is now. I was in the middle of something when this happened. Most probably, it will just work though.
Technical details:
Config: Data on Ext, DB on NAND, looped over EXT2. Yeah, it's returded fast.
System: mostly taken from other Sense 4.1 devices, proprietary files taken from several half-working Sense 4.x ROMs flying around here. Sound system taken from EvoHD2 ROM (yeah, CM9). Credits to Mr Evil for these files.
Kernel: Dorimanx 7.2 HWA (credits to Dori please)
Framework: stock Desire X ROM as a base, heavily modified to work with CM9 sound system, heavily optimized for smoothness.
NOTE for DEVs:
I was stunned to discover that DISABLING HW acceleration makes scrolling silky-smooth in 99% of the applications. Exceptions are: Rosie, Browser and... uh... that's it, I think. So, I REVERSED the way framework enables HW acceleration. Here's how: if the application doesn't request HW acceleration, it doesn't get it by default. If it requests it (HWAcceleration=true in the manifest), it DOESN'T get it either. If hwAcceleration=false in manifest, it DOES get it. This way, I only had to modify Rosie and the Browser and set hwAcceleration=false for them to actually GET the acceleration. The other apps just denied the acceleration natively. Please be aware of this change
Sense: stock Desire X ROM. I've got permission to use MyOne ROM (see Desire X forum), it has full 3D effects enabled and runs smooth as silk on HD2 (it's pretty damn smooth even with live wallpapers!)
What should work:
Everything. I know that WiFi router doesn't work, but that's it, more or less. Video shooting works at 15FPS. Sound recording works. Voice input works. BT works.
Known problems:
It does crash from time to time. Needs more work on system files. I was planning to recompile gralloc from CM9 to use it here, but didn't have the privilege to finish that.
For EXT2 loop to work, one needs to add creation of an empty data.img file in /Data/Data folder. Make it as big as possible. Format it for Ext2. The rest will be done by init.rc
............. Well, that's it. I'll be watching this thread. Don't ask me to develop anything though, I can't do anything without a working HD2. Sorry guys and good luck to anyone who will take it from here.
Bye
Click to expand...
Click to collapse
I will continue your hard work with Daekin
I've been working on Desire X Sense 4.1 port so, this will fix BT for us(build prop)
Thanks

Cant Install
Hello,i tried installing this rom but i couldnt..i get E:error in sdcard/commonsense41..zip(status6) any ideas?

blackphoenix50 said:
Hello,i tried installing this rom but i couldnt..i get E:error in sdcard/commonsense41..zip(status6) any ideas?
Click to expand...
Click to collapse
I cannot check for an obvious reason, but my gut feeling tells me that you downloaded a corrupted file. Try to open it with winzip. if it opens, extract the files and pack them back.
or just download again....

thelonewolf_pav said:
I cannot check for an obvious reason, but my gut feeling tells me that you downloaded a corrupted file. Try to open it with winzip. if it opens, extract the files and pack them back.
or just download again....
Click to expand...
Click to collapse
I did all these but still cant install.....tried also with twrp it gave me an error about updater binary...i searched at google and i think that the problem is the updater-script file...could someone plz check it cz i dont have the knowledge for that....

blackphoenix50 said:
I did all these but still cant install.....tried also with twrp it gave me an error about updater binary...i searched at google and i think that the problem is the updater-script file...could someone plz check it cz i dont have the knowledge for that....
Click to expand...
Click to collapse
There are a few double brackets in there. Mike_1996 noticed a few in this thread http://forum.xda-developers.com/showthread.php?t=2694879 thanks Mike. I spotted a couple more.
https://dl.dropboxusercontent.com/u/24033707/updater-script
Not tried this yet but looking forward to it, sad news about phone though, thanks.

updater-script modified http://www.mediafire.com/download/q8wt2wlh8aaokf8/updater-script.zip
modified with notepad++
now boot fine but take a long time !
i have installed with 5/40/5 partition clk 1.5 and ext4 2100 mb.
wifi don't work for me
bluetooth also
and comcorder
http://www.mediafire.com/download/zu1sz8u4qz7vwdr/commonsense4.1.zip

an image !

philipped346 said:
updater-script modified http://www.mediafire.com/download/q8wt2wlh8aaokf8/updater-script.zip
modified with notepad++
now boot fine but take a long time !
i have installed with 5/40/5 partition clk 1.5 and ext4 2100 mb.
wifi don't work for me
bluetooth also
and comcorder
http://www.mediafire.com/download/zu1sz8u4qz7vwdr/commonsense4.1.zip
Click to expand...
Click to collapse
does the recent apps appear when you long press the home button?cz i think its an essential feature...

I would just remove menu button and assign that to recent apps. that is the modern way. (not Samsung dinosasur way )

For system crash could be kernel fault... I remember when I tested dorimanx kernel each release was never really 100% stable independently from clock frequencies.

II test this rom of dungphp with tytung kernel (thank to all) and this is the same with sense 4.1 .
wifi/3g , camera , bluetooth , sound work .
camcorder don't work and google play work with uptades but can't instal news applications.(fixed instal apk
)
it's a very smooth rom and if someone can fix this problems .
View attachment 2656090
View attachment 2656091
this the link of one s ics2ville:removed
I have installed system on nand with dataonext (initrd intégrated) 5/370/5 :silly:
I have updated Google play in new installation and now it's OK.
new link http://www.mediafire.com/download/c8ds4r7g7qd7n5e/one_s_ics.zip

zenida said:
For system crash could be kernel fault... I remember when I tested dorimanx kernel each release was never really 100% stable independently from clock frequencies.
Click to expand...
Click to collapse
Dorimanx's kernel haven't given me one single problem with this ROM.
I used it as my daily driver until my HD2 died...

zenida said:
I have installed system on nand with dataonext (initrd intégrated) 5/370/5 :silly:
I have updated Google play in new installation and now it's OK.
new link http://www.mediafire.com/download/c8ds4r7g7qd7n5e/one_s_ics.zip
Click to expand...
Click to collapse
if you're using my ROM (I couldn't figure this out from your post), and use my initrd, then you have to make your system partition as SMALL as possible. Most of system files are relocated to EXT4.
For camcorder to work, copy it from any CM9 ROM.
Sense camcorder tries to record at 30FPS, which doesn't work with this version of stagefright. CM9 camcorder records at 15FPS and works flawlessly

thelonewolf_pav said:
if you're using my ROM (I couldn't figure this out from your post), and use my initrd, then you have to make your system partition as SMALL as possible. Most of system files are relocated to EXT4.
For camcorder to work, copy it from any CM9 ROM.
Sense camcorder tries to record at 30FPS, which doesn't work with this version of stagefright. CM9 camcorder records at 15FPS and works flawlessly
Click to expand...
Click to collapse
your rom is very smooth but i can't have wifi/3g working , it's a problem

philipped346 said:
your rom is very smooth but i can't have wifi/3g working , it's a problem
Click to expand...
Click to collapse
this is really strange. I had wifi and 3g working without any problems. I use both of them daily...
are you using magldr or clk?
what's your system size?
did you look at the logcat?

I use clk 1.5 and système size 5/40/5 .
Sent from my Nexus 5 using XDA Premium 4 mobile app

philipped346 said:
I use clk 1.5 and système size 5/40/5 .
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
interesting.
can you use ADB? if yes, try to:
cd /data
chmod -R 777 data
chmod -R 777 system
let me know if that changes anything

I test tomorow now i watch football .
Sent from my Nexus 5 using XDA Premium 4 mobile app

Develop Bugs

welcome