Related
Hey Vjaayyyyyyyy The new rom has a gap in the bottom of the connection manager. Do you know of anyway to overcome this?
Mike
Getting the same problem
How annoying
Hmm, haven't looked into it yet. I've not touched the new ROM yet, but my Universal rom is so screwed due to the stuff I do to it, I think it's time for a refresh. what rom are you using?
On the Phone Dialer, all we needed to do was copy in two bitmaps to replace the originals. Send me over a copy of the manager, or otherwise point me to the rom, and I'll see if I can do similar. At least this one is more VGA compatible then the last few. Try resource hacking it to see if it corrects it.
BTW - Sctojen - I notice you've still got the vertically offset (ie incorrect) titlebar text. Have you tried changing the font or playing with your window metrics (try CETuner to play with this stuff). I'm using a font called VJNina, posted somewhere or other on the board.
V
Vijay the following is the test imate rom I am using. Everything else rendering wise is fine.
i-Mate JasJar (PU10) Rom 1.30.68 WWE
Radio 1.09.00
Protocol 42.42.P8
Vj.
Not to sure what you mean by the horizontal text. Am Guessing from what i could make out do you use VJninja as like a system font. If so i will do a search and give it a try.
Also i notice in your screen shot you have got a nice looking battery bar sitting at the top of your screen where did you get this from.
Unfortunatly the new imate test rom comes with battery icon below (couldn't really get a good screen shot as it was in charging mode but with yours i notice you get several little bars with the 1 in the new imate rom the icon has just 2 big bars full and half full yours looks a little bit mor accurate. i would like to find out how to remove the one on mine and give yours a try.
Many thanks for all your help mate.
Scott
scotjen1: the vertical offset of your caption - in your screenshot, "Start" is touching the top of the caption bar. In mine, it's in the middle where it should be. This can be fixed, someone asked me once how I did it, I can't remember, but basically I use VJNina as my system font and CETuner to fix my "metrics". Have a look in the VGA thread for details (I think). But that's just cosmetic.
Battery bar - no idea. I thought it was built in. I'm not running much 3rd party stuff on my universal, since I only use it for development. I don't think I ran the extended rom cabs, so again, I'm not sure. I'll have to upgrade to the new rom soon and start playing. I haven't had time to look into any of it yet Busy weekend coding...
V
vijay555 said:
Battery bar - no idea. I thought it was built in. I'm not running much 3rd party stuff on my universal, since I only use it for development. I don't think I ran the extended rom cabs, so again, I'm not sure. I'll have to upgrade to the new rom soon and start playing. I haven't had time to look into any of it yet Busy weekend coding...
V
Click to expand...
Click to collapse
I think your battery bar is from SmallMenu/Plus (I think you told me once that you used this?). You can turn it on/off in the SmallMenu settings. (well - it certainly looks like the smallmenu battery indicator!)
man, do I have egg on my face.
Riceburner is correct, that's the battery icon from SmallMenu. You know, I never noticed? I use smallmenu on my Magician, which is my day to day phone, but I disable the battery icon because I use my VJToggleToday/PhoneAlarm hack instead. My universal hasn't been modded much at all yet by me, so I must have just left the icon on and not noticed. It's useful though.
V
For those interested, here's a link to the Nina font,
http://www.vijay555.com/nina.zip
and VJNina, a cut down version 1/2 of the size, but removing certain rarely used (by me) international characters.
http://www.vijay555.com/vjnina.zip
V
VJ, i guess its got nothing to do with the font. I had the start caption at an offset when i used to use OZvga to make the reg changes. I guess ozvga messes with some unwanted reg setting screwing it up....
However, if you copy the corresponding dlls (with 96dpi), and change the LogicalPixels reg values, the caption is center alligned!
Cheers,
San
Does anyone have the problem I have with the new rom, the new battery icon up on top bar still says its plugged into power when you unplug it from the computer, if I reset it it fixes it. Does anyone know how to fix this.
dreamtheater39: I'm sure it's not just the font, no reason why it would be. But I monkey around with various metrics, scrollbar size etc, as soon as I change resolution. So it's one of those. Not sure which, I just always play with a few by default... seems to correct the problem itself.
I just use VJNina because I find it a neater font then Tahoma at those resolutions. It's a hangover from my SPV days.
V
seal said:
Does anyone have the problem I have with the new rom, the new battery icon up on top bar still says its plugged into power when you unplug it from the computer, if I reset it it fixes it. Does anyone know how to fix this.
Click to expand...
Click to collapse
I have this problem too. Only when using Real VGA though, so my guess is that it's a problem with a slightly incompatible 96 dpi .dll file? (Of course, I don't really know what I'm talking about here, so feel free to expose my ignorance, everybody! )
dreamtheater39 said:
VJ, i guess its got nothing to do with the font. I had the start caption at an offset when i used to use OZvga to make the reg changes. I guess ozvga messes with some unwanted reg setting screwing it up....
However, if you copy the corresponding dlls (with 96dpi), and change the LogicalPixels reg values, the caption is center alligned!
Click to expand...
Click to collapse
The issue is with the system font size. For some reason, if you try to increase the size of the system font on WM5 it leaves the font at the same size, but raises it up. By default OzVGA tries to increase the size of all of the fonts when you switch to VGA mode. If you want to continue to use OzVGA and you don't want to deal with this, just go into the settings and change the System Font size for VGA mode to 900.
Brett
Brett
Worked a treat
Thanks
scotjen1 said:
Getting the same problem
How annoying
Click to expand...
Click to collapse
Hi, i am also getting this problem, I ahve patched with other utilities. Except this one.
Any one please suggest the changes to be done. Cheers
Hello all,
You may have seen my earlier thread with the modified color clock digits for the HTC Home Plugin. Well, I just can't leave well enough alone! This started off as JUVS color version of the Kaiser Home Plugin. I took some of the icons from JUVS version and some from Schaps. Then I made the 'unselected' ones dark and lit up the selected one with a bright spotlight. I also changed the house colors a bit and turned it to face the other side. Just didn't seem right with a blue roof . I like it better now and I hope you do too, see screenshots attached.
To install:
First install JUVS Kaiser Home Plugin, color version, see the CAB file later in this thread. Then go in and make sure the plugin is unchecked in Settings, Today, Items. Make a backup of the HH_FW*.* and HH_HOME*.* files in your Windows folder for safe keeping. Then copy the contents of the ZIP file attached to the Windows folder on your device (not the zip itself, extract the contents) replacing the same-named files. Reselect the plugin and take it for a spin. Love it? Good! Hate it? Restore the original set of icons and associated files or reinstall.
By the way, the colored clock digits I made for the original HTC plugin work perfectly here too. Copy them over the same way if you like. You can find them in this thread: http://forum.xda-developers.com/showthread.php?t=314510
And, that reminds me, I figured out the bezel issue affecting some of the icons in the files I put out for the original HTC Home Plugin. For those who were bugged by that issue I am attaching a bezel fix ZIP file that will correct the issue and leave a nice transparent icon background in keeping with the them of that set of files. You could use this fix on this Kaiser version as well and it will remove the spotlight from the selected item without affecting the colors and brightness/darkness differentiating selected and unselected. You just have to see it to see if you like it.
Is this for Hermes or Kaiser? This is posted in the Hermes WM6 forum.
Yes!
This applies for both actually, but I'm using it on a HERMES, running the Kaiser HTC Home Plugin. See the 5 tabs instead of 3? If you want it, look for JUVS version in this thread: http://forum.xda-developers.com/showthread.php?t=316107
gmgonzal, great work again! Thanks!!!
i'm trying to copy over the files in vista but i can't seem to... do i need to do this via the phone?
nevermind, stupid vista won't let you extract from an explorer view of a zip file
so the spotlight for each tab seems to show the old black/white icon when it is selected... going to try to recopy the files again.
That's because...
absolutg said:
so the spotlight for each tab seems to show the old black/white icon when it is selected... going to try to recopy the files again.
Click to expand...
Click to collapse
This is meant as a mod for the JUVS color version of the Kaiser Home Plugin. It brings the color icons that you are missing. You should install that first, then copy these icons over. I'm including the CAB file here in case others need it also...
do you know if this has the fixes included in the version posted on pg 6 of the original thread? thanks!
works well now. was wondering if you could do the spotlight with a transparent backgd instead of the gray? looks better with the default ATT them. thanks!
Here you go
absolutg said:
works well now. was wondering if you could do the spotlight with a transparent backgd instead of the gray? looks better with the default ATT them. thanks!
Click to expand...
Click to collapse
I guess I could , I wanted to do that next myself, it takes more effort to clean up the graphics for that. Check back...
This is great, thanks! Removing the bevel was part of the things I wnated to change about this plugin. What I would really love to be able to do now is completely remove the useless highlight that appears over the icons when they are selected - is this possible?
edit: just to be clear from the post above ... the highlight I mean is not contained in the images, I mean the OS highlight that appears over the images themselves when selected.
Also, for me personally, it would be great to be able to change the colour of the font used - if I change the colour of the clock images, then the font stay white which looks inconsistent to my fussy brain!
Thanks for any help with the highlight thing though.
good work, works well ! thank you!
I know what you mean
drblow said:
What I would really love to be able to do now is completely remove the useless OS highlight that appears over the images themselves when selected.
Click to expand...
Click to collapse
That highlight pi$$es me off too, what I always wanted to do was have the icons in greyscale and then make them bright color when selected, with no highlight around them. But that highlight seems to be built into the code. As far as the text color, Zoharbl said in my previous thread that you can change the text color for each Today screen item with a program called Today Agenda, but I haven't tried it to see if it works on the text on the top of the HTC Plugin. Here's a link if you want to try it:
http://forum.xda-developers.com/attachment.php?attachmentid=44083&d=1184589532
You're welcome
ratcom said:
good work, works well ! thank you!
Click to expand...
Click to collapse
Glad you liked it.
gmgonzal said:
That highlight pi$$es me off too, what I always wanted to do was have the icons in greyscale and then make them bright color when selected, with no highlight around them. But that highlight seems to be built into the code. As far as the text color, Zoharbl said in my previous thread that you can change the text color for each Today screen item with a program called Today Agenda, but I haven't tried it to see if it works on the text on the top of the HTC Plugin. Here's a link if you want to try it:
http://forum.xda-developers.com/attachment.php?attachmentid=44083&d=1184589532
Click to expand...
Click to collapse
Thanks for the reply. That's exactly what I want to see aswell! I'll try that app & let you know if it works.
interesting idea
Do you miss knowing which letters are on which numbers, like when dialing a number from a business? Like, "Call Now! 1-800-YES-YEAH" Here's the fix for Kavana/Ricky/HTC based ROMs.
This is a mod of Surreal Networks Alpha-Numeric Display patch (grey), without the T-Mobile Branding:
Now, with correct spelling. (Hey it was late!)
download BRANDING.GIF
place in the Windows folder
browse to it with resco explorer
rename to ms_mobile.gif, confirm
May require rebooting. You are welcome to modify this, make into a .cab or desktop installer.
UPDATE April 4: Newest version, no branding, simpler install, and works on both the in-call and dialer screens here! Or jump to page three for preview.
UPDATE April 18: One Point Zero release here: http://forum.xda-developers.com/showthread.php?p=2129954#post2129954
Thanks, that's great. Although, you spelled Excalibur wrong...
Thanks a ton! This is a great help!
Nice but I was wondering how the hell to get the panel AFTER you make a call to show the numbers on Kavana's 6.1. Like automated service tells you to put in your name or whatnot on the dialpad....
dialpad cab minus excalibur branding
attached is the same dialpad without the Excalibur branding.
install cab, reboot, enjoy.
thanks to Ben Hirashima for the cab
MountainDrew said:
Thanks, that's great. Although, you spelled Excalibur wrong...
Click to expand...
Click to collapse
Fixed!
Now, I am analyzing how to make a slicker package from Ben's example.
Yianaki said:
Nice but I was wondering how the hell to get the panel AFTER you make a call to show the numbers on Kavana's 6.1. Like automated service tells you to put in your name or whatnot on the dialpad....
Click to expand...
Click to collapse
Not sure. I will look into it. I suppose it could be added to the top of whatever image is in the "next" screen?
So it's only in one colour, and it might not match your blues, but I'll share the one I made for my phone if any of you like it.
I made one too
Windows standard colors
Here are original ones for each of the default colors and Segoe text. No Branding. Included one in grey, too!
Anyone else having a problem with the automatic alpha-num installers with a cooked ROM?
I like the one with T-mobile Branding. It makes the rom feel more official. (Extracted from the Surreal Networks CAB)
ygb said:
I like the one with T-mobile Branding. It makes the rom feel more official. (Extracted from the Surreal Networks CAB)
Click to expand...
Click to collapse
I am working on a complete suite of not T-Mobile Branding, trying to figure out the splash screens at the moment. I just cant dig the pink T; Ive tried! Been cruising the other forums for clues...
It seems that the Ben dialpad works on the in-call screen, but I cant simulate the behavior if i uninstall his cab and manually it the reg. What keys do others use to change background on the in-call screen? IT really needs some livening up anyway.
Profezza said:
It seems that the Ben dialpad works on the in-call screen, but I cant simulate the behavior if i uninstall his cab and manually it the reg. What keys do others use to change background on the in-call screen? IT really needs some livening up anyway.
Click to expand...
Click to collapse
Just one key...but it has to point to a file that exists. So if you've extracted the .gif file from the .cab / make sure you drop the .gif file in the windows directory and note what the .gif filename is as thats what you're going to put in the regitry entry...also make sure you soft-reset otherwise it won't change until then.
And as far as the in call screen is concerned ... look for a file in \windows directory named cprogback_land.png for your in-call screen
Here's the one that i use: It looks good with technology's another blue color scheme .......Just rename the extention from .jpeg to .png if you want to use it
nice tip! thanks!
pudgedaddy said:
...And as far as the in call screen is concerned ...
Click to expand...
Click to collapse
It appears that that file is hard-coded, so there is no way to mod the reg with the installer, but it looks like windows mobile's .cab-install system will back things up alright from a file replacement approach. So, a single installer for both is do-able.
Interestingly, the image I am overwriting is called Carrierlogo.gif, not cprogback_land.png. Are there two potential images retrieved for the call screen, one in the fore and one in the back? I wonder what I could do with that info...
Or, maybe it is named differently in different source roms with the same purpose. Will text that next.
boom, got it
So, I think i this is how the in-call graphics work:
It appears that the call screen does indeed call up two images (not including a contact thumb, if applicable) The background is hardwired as "cprogback_land.png". Also, instead of having the carrier text string at the top, it can have an image across the top, which is hardwired as "carrierlogo.gif". Nothing can be done, as far as I can tell, to change the pointers to other files, so overwrites are the only method of changing.
If the graphic is put inside the background image itself, it can be the full width of the screen, like any background, and likewise any height (up to 213) But the in-call screen is a bit busy.The top 24 pixels (after the window top) are reserved for the carrier branding text string (or image), followed by 2 blank rows of pixels and a horizontal rule at row 27. The next 88 pixels (the middle area is a call status area followed by another rule at row 116, and pressed digits fill the bottom area.
However, if the graphic (.gif only) is in the foreground, it can be any size and proportion, but if it is taller than 24 pixels, or wider than 311 pixels, it will be (UPDATED) scooted over four pixels and cropped to fit a box of those dimensions at the top. If it is smaller, it will be top-, then left-aligned. Either way, if it is there, it replaces the carrier text string, rather than having to be designed around it. One thing to keep in mind, if using this method is that it has to be 10 pixels narrower than the image that might be used on the dialer screen, or it will "shrink" when you switch screens, if you want them to "match".
If anything is unclear, or anyone has any details to add, or corrections to make, please let me know! Thanks
pudgedaddy said:
Just one key...but it has to point to a file that exists. So if you've extracted the .gif file from the .cab / make sure you drop the .gif file in the windows directory and note what the .gif filename is as thats what you're going to put in the regitry entry...also make sure you soft-reset otherwise it won't change until then.
And as far as the in call screen is concerned ... look for a file in \windows directory named cprogback_land.png for your in-call screen
Here's the one that i use: It looks good with technology's another blue color scheme .......Just rename the extention from .jpeg to .png if you want to use it
Click to expand...
Click to collapse
Thanks a lot pudgedaddy we definitely needed better visuals for the call in screen. Does anyone else have any other variations of screens like this laying around?
killswitch said:
...Does anyone else have any other variations of screens like this laying around?
Click to expand...
Click to collapse
One could be made by renaming any wallpaper that would work on the home screen.
I am working on a png one that blends seamlessly with a floating .gif dialpad right now. Must test it out tho'
Here is a trio of images to bring a consistent and mellow dialpad feature to BOTH the dial and incall screens.
Directions
With honor to the_ape for finding the registry key HKLM\Software\HTC\HTCMenus
This allows you to modify the menu size and skin the images of the HTCMenus, as found on the new V3 TF3D, like the one in all the latest ROM's with Topaz stuff in it. See the screen prints if you are unsure what I am talking about. You need these newer menus already installed, if you not not have them yet, these settings will not install them for you.
Remark 1: Oddly though it changes the menu size for all programs, except TF3D itself....[elim]
Remark 2: Problems with menu's drawn from the top (slow with floodfill error) are solved. So it should now work with Resco, wktask, SC3. The error may still appear if you are in landscape, the menu is drawn from top and has 6 or less items. To solve that too, also restore the included bitmap to the windows directory.
The bitmaps are hardly changed (I colored 6 very critically placed pixels), but I did re-encode as monocrome & 8-bit, so the first load of the first menu should be marginally faster.
For full skinning, read post 24. But if you just want to make the menus smaller, the attached registry file will allow to fit 11 in stead of 8 menu items on a screen by reducing the tile hight from 72 to 60. To restore to the original, import the HTCMenuNormal file.
The total allowable 'Navi' + 'Item' heigth is 696 in portrait and 376 in Landscape.
Original portrait values are 72+46 which at 8 items means (46+8*72+46)=668
Original landscape values are 72+46 which at 3 items means (46+3*72+46)=308
Not only too large, but non-optimal use of space, especially in Landscape.
I use portrait values 60+18 which at 11 items is (18+11*60+18)=696 Exact!
and landscape values 57+17 which at 6 items is (17+6*57+17)=376 Exact!
So I believe these values are ideal in efficiency, large enough to select and drag, but quite a bit more menu selections (double in landscape!!). The 'Navi' is too small for the finger, but you are supposed to drag the entire menu. And they do still visualise the fact there are more menu options. Below zip file holds now these values.
Or do it manually:
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\HTCMenus]
"ItemHL"="0,[B]79[/B],0,[B]6[/B]"
"ItemHW"="440,[B]60[/B],640,[B]57[/B]"
"ItemTile"="10,[B]60[/B],[B]152[/B],0,11,22,33,44,55,66,77,88,99,110,121,132,143,154,165"
"NaviHW"="440,[B]17[/B],640,[B]17[/B]"
"NaviTile"="10,[B]17[/B],[B]162[/B],200,211,222,233,244,255,266,277,288,299,310,321,332,343"
"NaviIcon"="20,[B]17[/B],[B]162[/B],354,375,396,417"
I was hoping also to find a registry setting to speed up the animation (sliding, appearing from bottom) but that I did not find yet.
Below files are registry files. You can import them using your favorite registry editor. Don't forget to also copy the bitmaps to the windows directory, To uninstall/reset, import the 'Normal' registry file, which is the values as I first found them on my Dutty's 1.8 EXTREME. The bitmaps you can leave (it does not matter) or delete (the old ROM version will re-appear)
NOTICE: Even newer TF3D (Dutty 2.2, but possibly also other recent ROMS) have slightly different settings. Co0kieMonster worked it all out nicely here, so best not use the outdated files in this thread anymore, unless if you have a really old version of Manilla.
This is a cool idea, as those menus took up the whole screen sometimes. Got any screen-shotties?
Good tips. Thank you very much.
Helps if you could give some instruction on how to use the files.
I tried changing the reg vaules (all the "item" values). It does change it smaller, but causes havoc in my Resco File explorer. When pressing the favourite button, the device freezes with no drop down menu displayed at all. I then press the menu at the bottom right, and the entire screen went hair wired for a while.
thanks for sharing!!!!!!!!!!!!!!!!!!!!!!!!!!!!!111
eaglesteve said:
Good tips. Thank you very much.
Helps if you could give some instruction on how to use the files.
Click to expand...
Click to collapse
There just registry files. Just import them. 'Normal' to go back to original, 'Small' to use my 10-menuline settings.
If you have .fred task manager (fdcTaskMgr) you may first have to associate .reg files so you can import. On Dutty's 1.8, this is already done. I think your resco also has a registry editor and can also import.
Or you just manually read the registry files and edit using your Resco registry editor
eaglesteve said:
I tried changing the reg vaules (all the "item" values). It does change it smaller, but causes havoc in my Resco File explorer. When pressing the favourite button, the device freezes with no drop down menu displayed at all. I then press the menu at the bottom right, and the entire screen went hair wired for a while.
Click to expand...
Click to collapse
Odd. Are the menus OK in other programs? You should soft-reset between changes. Can you revert to 'normal' by importing that file and is the problem gone again?
There is a problem with the selection (see screenshot #1). I test a little bit and when I let ItemHL on the values "0,73,0,0" it works better (see #2).
I attach the changed registry file.
Update: The problem is now that this doesn't work in manila?! All other menus are smaller but in manila the entries are normal (#3).
Elim said:
There is a problem with the selection (see screenshot #1). I test a little bit and when I let ItemHL on the values "0,73,0,0" it works better (see #2).
Click to expand...
Click to collapse
I had that once too, but it went away with the next reset. So I still have the ItemHL set to 58, but the select bar looks OK. So though I do not understand ItemHL, I think it may not be the cause of what you saw.
Edit: You are correct, the ItemHL needs to stay at 73, that value probably is not related to the 72 of ItemHW
Elim said:
Update: The problem is now that this doesn't work in manila?! All other menus are smaller but in manila the entries are normal (#3).
Click to expand...
Click to collapse
Hey, you are right. (I only use Manilla when I show of the phone, and use classic today normally) Maybe manilla uses hardcoded settings? Or some other registry settings?
cybermaus said:
Odd. Are the menus OK in other programs? You should soft-reset between changes. Can you revert to 'normal' by importing that file and is the problem gone again?
Click to expand...
Click to collapse
The problem of hair wired display is observed in Resco file explorer when you click on the favourite (Star) icon at the top right side. The device is momentarily frozen but return back with a blinking blackist menu.
If I import in the normal registry item, this problem is gone.
Okay - I LIKE the HTC menus on touchflo apps and would like to have this style menu in ALL programs (much like in Duttys rom) such as mail, calendar etc.. How can I make this happen?
But, it works only in Manila or also in all others programs (like Resco Explorer, ecc...)?
Thanks.
Kal-El said:
But, it works only in Manila or also in all others programs (like Resco Explorer, ecc...)?
Click to expand...
Click to collapse
It only works in other Applications. In Manila it doesn't change anything (for me). But that's okay because only in other applications the menus are to big.
cybermaus said:
I had that once too, but it went away with the next reset.
Click to expand...
Click to collapse
Two resets?
Update: No, doesn't change.
cybermaus said:
Hey, you are right.
Click to expand...
Click to collapse
At least it's not my mistake...
eaglesteve said:
The problem of hair wired display is observed in Resco file explorer when you click on the favourite (Star) icon at the top right side. The device is momentarily frozen but return back with a blinking blackist menu.
If I import in the normal registry item, this problem is gone.
Click to expand...
Click to collapse
Well, I'll see if I can get a copy of Resco and try if I can confirm. But if it is like you say, I am not sure if there is anything we can do about it. There is no programming or anything, just the menu size. If Resco is allergic to that, we may simply have to accept that.
Kal-El said:
But, it works only in Manila or also in all others programs (like Resco Explorer, ecc...)?
Thanks.
Click to expand...
Click to collapse
This *does not install* any large menu program. You must already have the large menus installed, they come with the new TF3D. And you probably do not have that, otherwise you would not have asked. If you do not have them yet, these settings will not do anything for you.
But yes, once you have HTC Menus installed, they work in *all* programs that use the template Windows Mobile menu system. (I suspect HTC replaces the template menu driver or something)
PS: do not mistake "HTC Menu" with "LargeStartMenu", also by HTC. The latter has been around for a while, even as cab, but the menu replacement is rather new, and not extracted (yet)
Cheers for taking it further, I'd had a play with the size values (not long enough), and not got what I wanted.
You have to remember the defaults are probably set for the pro2 with a smaller physical screen, hence the big'nes on the HD.
Font's are dependent on the font family you use I've found.
Looks like the small font mess up wktask too, rending it impossible to terminate/close task, or go to the action menu. Restoring it to normal font cures the problem.
Great!
thanks for sharing!
HTC Menu CAB installation?
cybermaus said:
This *does not install* any large menu program. You must already have the large menus installed, they come with the new TF3D. And you probably do not have that, otherwise you would not have asked. If you do not have them yet, these settings will not do anything for you.
But yes, once you have HTC Menus installed, they work in *all* programs that use the template Windows Mobile menu system. (I suspect HTC replaces the template menu driver or something)
PS: do not mistake "HTC Menu" with "LargeStartMenu", also by HTC. The latter has been around for a while, even as cab, but the menu replacement is rather new, and not extracted (yet)
Click to expand...
Click to collapse
Ok, I understood thanks.
It is possible to obtain the CAB for this application?
I Use Finger Menu, but does not satisfy me to 100%, I prefer an application developed directly from HTC...
Still thanks.
Kal-El said:
Ok, I understood thanks.
It is possible to obtain the CAB for this application?
Click to expand...
Click to collapse
I do not think anyone extracted it into a cab yet.
And I never done anything like that. It probably means finding out all the interdependencies between files, extracting said files, extracting the service settings, and building a cab. Interesting, I am willing to try when I have the time, but don't hold your breath, it may take a while.....
Really it is a very big work!
Fortunately I am a patient person...
Hi Guys, not even sure if this is possible, but can the WiMo scroll bars be skinned? I'm referring to the arrows and the bar itself.
I notice that the 6.5 scroll bars and arrows are different to 6.1, but is this "controllable" and can we change it ourself? If it is possible, what files would I need to change?
already tried such a way and there is no easy path about it. meaning there is no software or whateverware that allows you to do such thing. the only option available today is the one of changing system colors (you know like in normal pc's window background etc) and it does not even work well. I guess that a small proggie that behaves like fingermenu would do the trick...
crashDebug said:
already tried such a way and there is no easy path about it. meaning there is no software or whateverware that allows you to do such thing. the only option available today is the one of changing system colors (you know like in normal pc's window background etc) and it does not even work well. I guess that a small proggie that behaves like fingermenu would do the trick...
Click to expand...
Click to collapse
yeah, I didn't think there would be a software program to do it, was wondering if there's any .dll to embed the images or reg key to change it... Similar to how programs like KiteOS can change the scroll bars on desktop Windows to look like the Aqua theme bars...
Then again, given that TouchFLO is supposed to be usable instead of the scroll bar, I could just set the width to zero in registry and be done with them...
tried aswell but unfortunately this is not the best option... you will actually needed those sucky things sometime (for dropdown menus mainly, if the amount of choices is more lines than displayable, scrolling to the end is a difficult task...)