Develop Bugs

GPRS Prblem

Rogers Canada MMS/SMS/GPRS Settings?
Hi sorry if I sound like a real newbie but I am. I have only used a Blackberry for the last 5 years and nothing else.
I currently have a Blackberry on Rogers in Canada, and will be getting my Dash tomorrow, I will unlock it with imei-check, what else do I need to do in order to have it work like my blackberry, I get my email from a couple pop accounts and my work outlook which does support owa web mail. right now I sync my calendar and contacts with desktop manager.
Is it worth installing BB Connect and just get my emails like on my blackberry or is it better it use the Dash email tools? when using the Dash can I change my reply to address depending on the email account I recieved the email in?
How do I find my rogers settings for MMS/SMS/GPRS??
Thanks for any help! This forum is awesome!
G

Rogers
You should be able to point your ActiveSync server to your OWA server at work. Generally that works just like your BBerry if you enable Push Email (under the comm manager on your dash).

Thanks I tried that, but it won't let me sync to the owa server for some reason, most likely my it guys have blocked it.
I installed BB Connect and it wirks for receiving but I can not send it is greyed out.

here are the settings:
Click Start/Settings/Connections/GPRS
click Menu, choose Add
Description: Rogers WAP
Connect to: wap network
Access point: goam.com
User name: wapuser1
Password: wap
Primary/Secondary DNS: 0.0.0.0 (leave unchanged)
Ip address: 172.025.015.041
When you finish click Done.
Then make another new connection:
Description: Rogers Internet
Connects to: the internet
Access point: internet.com (vpn.com - for those like me who pay extra $10/mth. for real IP address)
User name: wapuser1
Password: wap
Everything under leave blank
After you click Done create one more new connection:
Description: Rogers MMS
Connects to: WAP Network
Access point: media.com
username: media
password: mda01
Pri-dns: leave blank
sec-dns: leave blank
ip address: leave blank
When you finish click Done.
From the connections menu select "Proxy"
Menu/Add
Description: Rogers WAP Proxy
Connects from: The Internet
Connects to: WAP Network
Proxy (name: port): 208.200.067.150:9203
Type: WAP
User name/password leave empty
Click Done.
(Proxy connection is not mandatory - things will work without it too)
Then go to home screen, click Start/Settings/Connections click on Menu select Advanced
Internet connection:
Automatic
Work connection:
Automatic
Wap connection:
Automatic
Secure wap connection:
Automatic
(it may be already like this)
Then launch Messaging (press on that button with the letter)
Select any of the listed accounts, click Menu, choose Options, then select Account Options/MMS.
Put the checkmark on these items:
Retreive Immediately;
Save sent messages (your choice actually);
Allow delivery reports;
Allow read reports.
Set Number of attempts to 2
Put Photo resolution to: QVGA (320*240)
Then click right softbuton "menu" and select MMSC SETTINGS
Again right soft buton - Menu/New
Name: Rogers MMS
MMSC URL: http://mms.gprs.rogers.com/
WAP Gateway: 172.25.0.107
Port: 8080 (or 80 - both worked for me)
Connects via: WAP Network
Max. Sending Size: 250K
WAP Version 2.0
I got this from www.howardforums.com

Thanks very much!!

I've entered all the settings you've listed and have been able to send an MMS, but cannot receive. Any thoughts as to why? It appears that the device won't connect to retrieve any messages.

Cruisin1966 said:
I've entered all the settings you've listed and have been able to send an MMS, but cannot receive. Any thoughts as to why? It appears that the device won't connect to retrieve any messages.
Click to expand...
Click to collapse
It appears the problem was with my SIM card the whole time. I can't receive MMS on any phone, Rogers branded or not. Once I put my wife's SIM int he phone, the normal settings I've been trying worked perfectly the first time.

GPRS usage monitor that works?
Can someone tell of any GPRS usage monitor programs that work on the Excalibur?

Never mind.
I found out that Efficasoft makes a special version for the DASh and some other phones here:
http://www.efficasoft.com/gprsmonitor_w.html

efficasoft
smartphone gprs traffic monitor
ver. 3.51w

I'vwe noticed that even when not having anything coming in, the counter slowly creeps up.

Never mind.
I was reading it wrong. I've only used 1.74Kb.
The other figure was the projected month usage at the current rate.

did anyone managed to get the today plugin working in other homescreens?
when I put it in my homescreen it is always on the very left position on the screen.

Well these are the settings provided by my service provider .. but i dont knw whr to appy this.....????
on my excalibur with wm5
Manual GPRS settings
Settings name Hutch_gprs
Home page http://www.hutchworld.co.in
Session Mode Permanent
Connection security Off
Data bearer GPRS
GPRS access point portalnmms
IP address 10.10.1.100
Authentification type Normal
Login type Automatic
User name <blank>
Password <blank>

just go to setting, connections, and there gprs, select new and follow instructions?

evow said:
just go to setting, connections, and there gprs, select new and follow instructions?
Click to expand...
Click to collapse
after doin this also the gprs is not workin.. is there anythin else i have to do ... to make it work.....

uncheck autodetect setting in ie?
is there an E or so mentioned above in the screen....?

evow said:
uncheck autodetect setting in ie?
is there an E or so mentioned above in the screen....?
Click to expand...
Click to collapse
Sometime it appears n sometime it disappears....
wht should i select wap/work/securewap/internet????

i have the same thing that it appears, and leaves again,
bo worry
Normally you should check internet connection?
my settings with connections:
name : TELENET
connect to : INTERNET
accesoint : internet.be
all the other fields are blank.
settings ie:
uncheck autodetect settings
slect network: the internet
save ; and im connected
i guess that ther must be something wrong with : portalnmms
maybe it is portalnmms.com/or other...

yea a E is on my screen.....
Manual GPRS settings
Settings name Hutch_gprs
Home page http://www.hutchworld.co.in
Session Mode Permanent
Connection security Off
Data bearer GPRS
GPRS access point portalnmms
IP address 10.10.1.100
Authentification type Normal
Login type Automatic
User name <blank>
Password <blank>
and they have mentioned the access point.. also...and selected the internet as my option but still its not workin .... doin a master reset will help in this case...........

A little help pretty please

I upgraded to the Rogers wm6 ROM which I grabbed from the rogers website the other day and all was very well until I realized I couldn't browse the web or send/receive MMS. I set everything accordingly to this link: LINK
When I click send/receive on MMS it says "Error Synchronizing" up top and in IE i get "ERROR: The remote party has ended this connection"
I have done everything in my power to fixing this and this is my last resort.
Thanks

just to clairify, are you trying to use this Rom on Tmobile? and if so, with or without T-Zones internet hack?

yes on tmobile and I dont need the net hack for i have the $20 data plan

the link you are following is for the proxy. Here is what I use (this will set up picture messaging too),
Code:
Go to Start > Settings > Connections > GPRS
Create these GPRS profiles:
T-Mobile MMS
Connects to: WAP network
Access point: wap.voicestream.com
T-Mobile Data
Connects to: The Internet
Access point: wap.voicestream.com
PictureMessaging
Connects to: The Internet
Access point: wap.voicestream.com
Delete any profile that is not one you just entered!
Now go to Start > Messaging
Scroll to MMS, while MMS is selected press Menu > Settings > Menu > MMSC Settings
Delete anything in here, then create new profile "PictureMessaging" with following:
Name: PictureMessaging
MMSC URL: http://216.155.174.84/servlets/mms
wap gateway: 216.155.165.50
port: 8080
connect via: wap network
max sending size: 300k
wap version: wap 2.0
Go to Start>Settings>Regional Settings and change the language and locale to US English and change the date and time format to your preference
Go to Start>Settings>GPRS Authentication and verify it is set to PAP

thanks for taking the time and writing that out but it's still not connecting.
i have everything (internet, work, wap connections) set to automatic.

with those setting mine works flawlessly. Wish I had a better answer for you.

so the internet started working.... i didnt even do anything. But MMS is still getting the same error.

MMS Will Work Using The Rogers ROM With The T-Mo MMS Settings
akagoffer said:
so the internet started working.... i didnt even do anything. But MMS is still getting the same error.
Click to expand...
Click to collapse
Go to this thread, Post #2 for the T-Mo MMS settings http://forum.xda-developers.com/showthread.php?t=338536............!

yeah that's where i ment to link in my first post... double checked the settings and it should be all good but i still get the error

Did You Do This
akagoffer said:
yeah that's where i ment to link in my first post... double checked the settings and it should be all good but i still get the error
Click to expand...
Click to collapse
Did you also do this when using the Rogers ROM! Go to Start> settings> Connections> Gprs> New> Description> Connects to:WAP Network> Accesspoint>wap.voicestream.com? User name: (blank)> Password: (blank) Authentication Type: (none)> PrimaryDNS: 0.0.0.0> Secondary DNS: 0.0.0.0> IP address: (blank)> Done .........!

yeah i did, awamzing thing though...today at work it started working. I guess it takes a few days for everthing to start communicating. Thanks for all the help everyone.

o2 mms settings?

Hi All,
I'm having trouble with the mms settings on my Desire...(3g works fine) I've put in the following settings that I found online somewhere but it doesn't work (won't send mms). I'm on o2 simplicity 20 tariff.
Name: o2 MMS Postpay
APN: wap.o2.co.uk
Proxy: (not set)
Port: (not set)
Username: o2wap
Password: password
Server: http://mmsc.mms.o2.co.uk:8002
MMSC: http://mmsc.mms.o2.co.uk:8002
MMS proxy: 193.113.200.195
MMS port: 8080
MMS protocol: WAP 2.0
MCC: 234
MNC:10
Authentician type: Not set
APN Type: not set
Does anyone on o2 have different settings that work? Or let me know what I'm doing wrong?...thanks!

Try these settings, they should hopefully work: http://forum.o2.co.uk/viewtopic.php?p=144262#144262

I am on the same tariff and my MMS works perfectly ..... apart from the resizing issue.
My details are the same as yours apart from :
Server : Not Set
and
APN Type : mms
I also have another APN called O2 MOBILE WEB with these settings :
APN : mobile.o2.co.uk
Proxy : Not Set
Port : Not Set
Username : O2web
Password : password
Server : Not Set
MMSC : Not Set
MMS proxy : Not Set
MMS port : Not Set
MMS Protocol : WAP 2.0
MCC : 234
MNC : 10
Authentication Type : Not Set
APN type : default
HTH

Thanks Mastoid!
Yep the that's the link I got my original settings from...
I'll try out the small changes hot-fuzz recommended too...checked my other APN setting and they were the same.
Don't know where I'm going wrong...I can receive them ok...just trying to send them takes forever and it never gets sent.
Just switching off the phone now...will see if it works and report back...
EDIT: (stupid) question...but do i need to have 3g on for mms to work? Never had to on my other (non-smart) phones but thought these might be different...

Yes, 3G/GPS/EDGE is needed, that's the cellular connection
Do you have 3G in your area?
SMS uses a small data channel on the GSM protocol. This data channel is used to transmit information about the network (like the name, signal, type, etc) and for example connect calls. It was also realised it could be used to send small messages, then SMS was born.
Now, MMS is entirely different. When you get an MMS what actually happens is that you get a special type of SMS that tells your phone that it needs to connect to a server to download a MMS message. Doing so means it opens a data connection through GPRS, EDGE, 3G, HDSPA, or whatever data connection channel is available.

Just to add to this. You dont need to have it ON, you just need to have it available.
I have Mobile Network turned off at home and 3G automatically turns on for the purpose of sending an MMS.

Thanks again for the helpful advice! Seems like I hav to manually turn on 3g for it to send. Will wait and see if the recipient responds...

...still no good, can't send mms settings are exactly as suggested above. Hopefully once o2 release the desire it might help...

found this over on the AV Forums, it's for htc magic but some guy replied that the settings also work with the desire.
Doug86 said:
Right after far too much messing around I have managed to get the settings to work!!!
This guide is based on a HTC Magic that has been unlocked and rooted and is now running a O2 SIM card.
You will need to set up 2 x APNs on the handset.
First one is for your mobile internet. Remember that if you do not have the unlimited web bolt on then this will start to get very expensive for you! You need to enter this information in. If there is nothing written for a paticular field then just leave it blank.
Mobile Web:
Name: o2
APN: mobile.o2.co.uk
Username: web
Password: web
MCC: 234
MNC: 10
MMS:
Name: MMS
APN: wap.o2.co.uk
Username: o2wap
Password: password
Server: http://mmsc.mms.o2.co.uk:8002
MMSC: http://mmsc.mms.o2.co.uk:8002
MMS Proxy: 193.113.200.195
MMS Port: 8080
MCC: 243
MNC: 10
Now once these two seperate APN's have been entered and you have made sure you saved them you should see a grey circle next to each one. Click on the MMS circle and it should now have a green light inside it.
Re-Boot the handset.
You should now have mobile internet and MMS capabilities
Just remember that these are the settings that worked for me on my HTC Magic unlocked and used with a O2 SIMplicity card with a unlimited web bolt on. Make sure you have a data package otherwise your phone bills will be massive! If in doubt check with O2 to make sure your not being charged for the data etc. I cannot be held responsible!
Click to expand...
Click to collapse
http://www.avforums.com/forums/htc-...using-o2-simplicity-sim-web-mms-settings.html
from this it looks like your MCC is wrong should 243 not 234.

Anon87 said:
found this over on the AV Forums, it's for htc magic but some guy replied that the settings also work with the desire.
http://www.avforums.com/forums/htc-...using-o2-simplicity-sim-web-mms-settings.html
from this it looks like your MCC is wrong should 243 not 234.
Click to expand...
Click to collapse
I just found those settings on avforums thanks, tried resetting the MCC to 243 and clicked save...but the whole APN was removed/deleted so had to reset it back up using 234 as standard.
Just wanna make sure - is it 234 or 243 that I should be using?

Just wanted to say thanks for the settings!
Was trying to figure this out & found the info very useful
Bloody lack of o2 support lol

O2 setting for Desire
Hi I have a HTC Desire was locked to T-Mobile now unlocked, (but still has T-Mobile Root Rom)
I used to have an Iphone 3G for which I sold and now I have the Desire but I still use my Pay and go O2 SIM which I got for my Iphone, all the setting I had found didnt seem to work but after scouring the web I found a page which gave me most of the settings. I now have internet and MMS. The setting I used are as followed. (p.s. please restart phone once input) (p.p.s. I didnt need 2 separate APNs settings for internet and MMS text, if you input all into the 1 it should all work once restarted phone)
Go to settings then Wireless & Networks then scroll down till you find Mobile networks (set option for roaming, networks, APNs)
then Access Point Names, Push Menu and New APN.
Then input the following
I cant post any links and as the setting have web addresses in them i cant post this so have added it as an attachment

Sorry If these are a repeat of the settings posted before but these settings i got of O2 work perfectly with my phone now( MMS and Mobile Data)
Press the Back/Home key
Tap Settings
Tap Wireless controls
Tap Mobile network settings
Tap Access Point Names
Press the Menu key
Tap New
Tap Name then tap the text box and enter O2 Pay & Go then press the Back/Home key
Tap APN then tap the text box and enter payandgo.o2.co.uk then press the Back/Home key
Tap Username then tap the text box and enter payandgo then press the Back/Home key
Tap Password then tap the text box and enter password then press the Back/Home key
Tap Authentication then tap Normal
Skip past APN DNS 1 and APN DNS 2 as these are preset 0.0.0.0
Tap Proxy and enter 193.113.200.195 then press the Back/Home key
Tap Proxy port and enter 8080 then press the Back/Home key
Skip past Proxy user name and Proxy password
Tap Proxy type then tap HTTP
Tap Save
Tap O2 Pay & Go so a green dot appears next to it.
Press the Back/Home key four times to return to the standby screen.
PS: they may be in different order to your phones ROM
AND THESE ARE FOR THE HTC DESIRE

I had issues with mms/3g settings on o2 today - called up o2 and they said they had issues last night/today
this is now working ok from about 1pm for me
i'm using wap.o2.co.uk / proxy: 193.113.200.195:8080 and working ok
mobile.o2.co.uk worked for 3g but not for mms it seemed...
http://status.o2.co.uk/ <- saw that in another post - very useful

Please someone solve my mms problem!

Hi all, I am literally tearing my hair out over this! My Desire HD seems to refuse to receive picture messages, it says downloading then fails.
I am on Orange,have spoke to Orange and have input all the settings they told me to, I can send mms, but seems to have a serious problem receiving them.
Annoying thing is when I was on the phone to Orange they sent me an mms and it worked, come off the phone, my sister tries to mms me and download fails!
Please, has anyone else encountered this? Thanks

Hi & welcome to XDA
Before heading for a straight factory reset, have you been able to send any MMS messages? Is it just pictures you struggle to send & receive?
I am also on Orange, these are my MMS APN settings.
Orange UK MMS Settings
Code:
Name : Orange UK MMS
APN : orangemms
Proxy : 192.168.224.010
Port : 8080
Username : Orange
Password : Multimedia
Server : <Not Set>
MMSC : http://mms.orange.co.uk
MMS Proxy : 192.168.244.010
MMS Port : 8080
MCC : 234
MNC : 33
Authentication type : <Not Set>
APN type : mms
APN protocol : IPv4
Do yours match these?

Hi,
Thank you for the welcome, my settings did not match yours,they were the same as what is shown here
Photo Messaging setup
Thank you.
Please follow the instructions below to complete setup.
Setting up the Device
On the device, tap the Menu icon (or Applications > Menu)
Select Settings > Wireless & networks (or Wireless Controls) > Mobile networks > Access Point Names.
Press the Menu key and tap New APN.
Select Name, enter Orange MMS and tap OK.
Select APN, enter orangemms and tap OK.
Enter the user name and password listed below. If no value is listed, leave the field blank.
User name: Orange
Password: Multimedia
Select MMSC, enter h ttp://mms.orange.co.uk and tap OK.
Select MMS proxy, enter 192.168.224.10 and tap OK.
Select MMS port, enter 8080 and tap OK.
If available, select Authentication type then select PAP
Select APN type, enter mms and tap OK.
Press the Menu key and select Save
I have just changed them to yours and still no joy :-(
Yes it is just mms I have a problem with, everything else is fine!
And as said I can send them, but not receive!

Two things I can think of...
1. Is Mobile network enabled all time (there is an option in the Mobile network setting page for that)
2. Sometimes for some stupid reason if you are connected to WiFi, the 3g connection will be turned off in Android (to save battery). Try turning off WiFi and see if downloading MMS is successful.

+1. Picture messaging only works with a 3g connection, not wifi.
Sent from my Motorola Startac running Atari 2600 software!

naailalzuhir said:
Two things I can think of...
1. Is Mobile network enabled all time (there is an option in the Mobile network setting page for that)
Sorry, where is this in the menu as I can't find it :-s
2. Sometimes for some stupid reason if you are connected to WiFi, the 3g connection will be turned off in Android (to save battery). Try turning off WiFi and see if downloading MMS is successful.
Click to expand...
Click to collapse
Wifi is not connected!

Anyone? Could anyone kindly post their internet settings AND mms settings, thanks

Anyone? Pretty Please?

APN settings for Tesco Mobile

Hi, I'm in Ireland, my Tesco Mobile sim card won't register automatically on the network for data. Would any of the UK or Irish lads have the APN settings for the Swift on Tesco Mobile.
The phone model or brand is not on their website yet for self registration.

younger06 said:
Hi, I'm in Ireland, my Tesco Mobile sim card won't register automatically on the network for data. Would any of the UK or Irish lads have the APN settings for the Swift on Tesco Mobile.
The phone model or brand is not on their website yet for self registration.
Click to expand...
Click to collapse
You can expand the Android section below the input boxes, and get the details to manually set up the APN? (Just skip 1 & 2)
Can't post the link to Tescos APN settings, as I don't have enough posts, so just Google "tesco mobile apn settings ireland", it's the first post

Cheers, I tried that, it didn't work. I must have done it wrong, I'll try again tonight when she gets home from work.
Thanks for the help.
Sent from my XT1053 using Tapatalk

younger06 said:
Cheers, I tried that, it didn't work. I must have done it wrong, I'll try again tonight when she gets home from work.
Thanks for the help.
Sent from my XT1053 using Tapatalk
Click to expand...
Click to collapse
Direct from Tesco Mobile website:
From your Android Phone, select the Settings icon . In the settings menu scroll down until you see Mobile networks.
You should now see an option called Access Point Names.
Tesco Mobile recommend you reset to default all listed APN’s, you can do this through the top right section of the Access Point Names dialog box, in the below example click on the MORE button.
When complete you should have 2 NEW APN’s added similar to the picture below. This reset allows you to successfully browse the internet and send MMS messages. If you are still experiencing issues, please follow the details below.
Within the Access Point Names menu edit the settings for Tesco Mobile Internet, this can be done by clicking on the icon you will need to verify all settings match the one’s listed below.
Name: Tesco Mobile Internet
APN: tescomobile.liffeytelecom.com
MCC: 272
MNC: 11
APN Type: default
Within the Access Point Names menu edit the settings for Tesco MMS, this can be done by clicking on the icon you will need to verify all settings match the one’s listed below.
Name: Tesco MMS
APN: tescomobile.liffeytelecom.com
MMSC: http://mmc1/servlets/mms
MMS Proxy: 10.1.11.19
MMS Port: 8080
MCC: 272
MNC: 11
APN TYPE: MMS
APN Protocol: IPv4
When you have entered all of these settings please reboot the phone to allow the settings to take effect.