Develop Bugs

Unable to boot up after upgrade ROM to WM6

I follow instruction in http://forum.xda-developers.com/showthread.php?t=313486 but after hardreset.
My p800w is stuck in T-Mobile logo and version number. It can't continue booting up to windows mobile.
Question: How to flash ROM without ActiveSync?
How to recovery my Artemis?
Welcome any advice,
Thanks in advance.

Yea me to, mine is now a brick after that upgrade? No active sync connection possible and all I get now is the blue O2 start screen after the hard reset with the red writing and numbers in the top left hand corner..
Phone is an UK XDA Orbit
IPL 1.25.0001
SPL 1.11.0000
GSM 02.67.90
OS 3.4.0.0
HELP!!!!!!!

yeah, I had the same problem and have created a thread for it already. unfortunately I got no useful replies, and it seems that I am stuck waiting for an official o2 ROM so that I can recover my Orbit.

It seems there is a way to un brick our phones I just need to get my phone bootted into bootlader mode which no one seems to say how to do??
Can anyone help how I can boot my Orbit , like what combo of keys I need to press to boot it into bootloader mode then XP will see it at a driver level apparently Active Sync still won;t but I will be able to run some German ROM update with the ROM file replaced with the other ones and it may come back to life..
Help how can I boot my phoen in bootloader mode???

motomob said:
It seems there is a way to un brick our phones I just need to get my phone bootted into bootlader mode which no one seems to say how to do??
Can anyone help how I can boot my Orbit , like what combo of keys I need to press to boot it into bootloader mode then XP will see it at a driver level apparently Active Sync still won;t but I will be able to run some German ROM update with the ROM file replaced with the other ones and it may come back to life..
Help how can I boot my phoen in bootloader mode???
Click to expand...
Click to collapse
I read in here that you hold the voice button and soft reset.

Decaf said:
I read in here that you hold the voice button and soft reset.
Click to expand...
Click to collapse
Correct and use mtty
Already see in the forum ....

Thanks guys and apologies for the spelling..I ran the Artemis_USPL before I tried upgrading to WM6 and again have been able to run it after with my new brick now with the phone in bootloader mode but still when I try and run the german ROM update a) it will only work with the german file which freezes @ 3%? This seems to be a known problem reading around and b )when I replace it with the smaller ROM file, 54MB the german one is 66MB, I originally tried to use it doesn't read the ROM file or the update utility doesn't want to read it. I reckon I might be able to get it back if I can get one of the ROM update utilities to read a good ROm file and send it to the phone.
I can;t find this MTTY program to sniff the USB port and return the code of if the USPL util wokred as I think that could be key to all of this.
Can anyone post a quick how to here for
1) install MTTY from somewhere
2) what command to run agaist the phoen to see if the USPL util worked and what values I should be looking for
3) another WM6 ROM version (that the update utils can read) download location I can download from to try and send to the phone using the German update util
Not asking for much am I but I desperately need my phone back WM5 or 6 in the next day or so so really can't send it off.
Thanks

Error message I recive at the 3% stage when using the German ROM and english update util.

use the file attach and read that :
http://forum.xda-developers.com/showthread.php?t=285112

Thanks but I'm not that cleud up on what commands I'm meant to be sending. It works in Bootloader mode I ge a response from the phone by send it a command. But even if I get a response telling me what the CID status is its not much help as I think ti shoudl have tekane BEBEs ROM by now as I've got the german ROMUpdateUtility sending that 54,272KB file to the phone but it stops after 3%. What are my options?

motomob said:
But even if I get a response telling me what the CID status is its not much help as I think
Click to expand...
Click to collapse
That's right. On older models MTTY was quite useful, but not on the Artemis. You cannot use it to read the CID status anyway. If you are not sure about the status, run the USPL tool, just to make sure.

I've already re run the USPL ROMUpdateUtility and it completes 100% okay in bootloader mode. But after I hard reset and then try and flash the WM6 BEBE ROM or any ROM German etc back onto it it either fails with the error code I posted up earlier or gets to 3% and fails.
What are my options at this stage? Does anyone have a link to another ROM I can try like the original WM5 O2 ROM or any other WM6 ROm that might work. I'm willing to give them all a try as it's just a useless phone right now and I haven;t sent it off as 1) I need it before the weekend and 2) As I can flash some ROMs with the USPL and others have done this no problem I really feel there must be a solution as I can still falsh the phone.

What can I say RTFM... I did it all right and I didn't have a brick, I missed out one small detail... loading on the ROM with the extended ROM. All now running and it does seem a little faster than WM5.
Thank you to all those that tried to help out. To the others that are still having probs.. Don't try and run the update in the middle of a busy day in the office whilst trying to manage 100 other things meaning you are probably missing out a line like me...
One question though how do I get back my O2 power and storage meters on the today screen back as I liked them and the WiFi seems to have a bug where when it is enabled and you click on the WiFi symbol up the top it only allows you to switch it on, when it is already on.. so you have to open up the COMM manager to switch it off.

So how did you fix it exactly? I have read this thread thoroughly and can't find out what you did!

ERROR[206] occurs while trying to update ROM to WM6
While tring to update ROM to WM6 on O2 XDA Orbit i encounter ERROR[206].
I wanted to attach the screen shot but dont know how to do that, but anyway what i am doing is i attached my pda to my pc via activesync using supplied usb cord. Everything goes well till i reach a screen where it says "You are now ready to update your ROM image...." and once i click next a progress bar apperas and my pda shuts and activesync exit's automatically and my pda tries to restart with RBG band and some text:RUU, IPL 1.25.0001, SPL 1.25.0000 and USB. And thats it after few seconds or a min i get the ERROR[206] and my pda hangs.
I dont know why Activesysn shutsdown ???
Just an additional in i want to tell that without installing activesync i am not able to connect/pair my pda with my pc. So do i need to install the drivers and then try or it doen't matter cause once i install Active sync i can connect the device.
Please help me with this....
Thanks

unable to load bootloader!!!!!!!!!!!!
HELP!!!!!!!!
I have HTC3300, tried to update rom, now its bricked. I tried to start bootloader by pressing the voicebutton and softreset but loads in t-mobile screen and hangs, im unable to start the bootloader.
Is this end of story or are there any other options to get the bootloader to start????
please help

Bootloader
I had a problem with my phone loaded touch flow 4 and cid unlocking, everything was fine then after a while it froze at boot up.
I look put the battery and did a hard reset, put it into bootloadeder mode, reflashed with a t-mobile rom does not need to be cid unlocked to do that.
Once origonal rom was working, cid unlock again, flashed back to touchflow 4.0 - sorted

Where did you got an tmobile rom from can you tell me. Mine is also freezing on booting almost once every day or so after I've upgraded to 4.0

Dutty's ROM locked my phone?

So...I've been using an older version of Dutty's ROM, but I haven't updated in a few weeks.
Tonight, out of nowhere, my phone will now only show a screen saying:
"This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers.
To obtain a newer release or further information, please revisit the web site that you used to obtain your current beta release."
Strange...
I tried downloading the most recent version of Dutty's rom and loading it, but the computer says "Cannot connect to your PDA phone..."
What's going on here!?
I have tried resetting the phone via the reset button (under the stylus), and I have tried restarting the phone via soft/hard reset, but nothing works!
Everytime my phone turns on, it goes immediately to this white page saying the "This concludes the beta test of this software release..."
How can I make my Diamond work again?!?
Please help!

i am having the same problem tonight too
i did a hard rest.. didnt fix it.. plus i lost all the stuff i had on there.. but it's ok
i heard u need to reflash it or something but i donno the full detail.. hope someone here can help us... thanks
step by step instruction would be great

I think you must put your diamond in "bootloader mode". and you will reflash your phone with a new rom, or another rom...
Booloader mode (usb) = Volume down + reset
In the screen (down) = serial, and if you connect with usb you can see "usb" and now you can reflash!

how can i reflash? i'm VERY new with this smartphone stuff my first smartphone so i donno a lot of stuff..
does it need HSPL 1.24? cause if it does i cant seem to run DiamondCustomRUU after my phone went black screen

i will try the "bootloader" mode, but i hope it works! i will post results a.s.a.p.!

Same for me on Dutty 2.3, but did hard reset and let phone set up. Do NOT change the date, I left mine as September, and phone will continue to set up and start. Now what I need to know is if I flash with latest rom will that allow me to set current date?

bigbro168 said:
how can i reflash? i'm VERY new with this smartphone stuff my first smartphone so i donno a lot of stuff..
does it need HSPL 1.24? cause if it does i cant seem to run DiamondCustomRUU after my phone went black screen
Click to expand...
Click to collapse
You put "volume down" and, in same time, you put "reset" (you hold these 3 seconds) => and you enter in bootloader, then you connect your diamond to USB and launch installation...
i think you don't need a HSPL if you want flash with the same rom... but you may use another HSPL for another rom...

OK - so i just started in Bootloader mode as suggested...
after that, i plugged it in to my computer vis USB.
then, i opened the most recent rom updater (supplied by dutty...see the thread in this forum).
it is currently updating, and everythign is looking good.
so, why do you have an experation on your rom's dutty??? what's up with that?!?

thanks fabe
but let say i want to flash the SwithBL Rom.. it's not the one i used b4.. do i still need HSPL? if yes how do i install so i dont get the black screen and it actually works?

theorie said:
OK - so i just started in Bootloader mode as suggested...
after that, i plugged it in to my computer vis USB.
then, i opened the most recent rom updater (supplied by dutty...see the thread in this forum).
it is currently updating, and everythign is looking good.
so, why do you have an experation on your rom's dutty??? what's up with that?!?
Click to expand...
Click to collapse
can u send me the pw for dutty's ROM? i cant seem to unzip it.. just wondering did u use HSPL?

bigbro168 said:
can u send me the pw for dutty's ROM? i cant seem to unzip it.. just wondering did u use HSPL?
Click to expand...
Click to collapse
i just downloaded & installed: V2.9_5_2_20275_RTM_Full_MSVC
http://rapidshare.com/files/162091111/Ruu_Signed_duttys_diamond__V2.9_5_2_20275_RTM_Full_MSVC.zip
the password is: Duttys V2.9 RTM Finale
i have HSPL installed.

bigbro168 said:
can u send me the pw for dutty's ROM? i cant seem to unzip it.. just wondering did u use HSPL?
Click to expand...
Click to collapse
careful you might get banned. see dutty's thread.

We have a thread for dutty's ROM. Please discuss there!

HardSPL... 0%?!

Hiya XDA
I've been trying all evening to get any HardSPL onto my Diamond without success, everytime I try I get to 0% and after a few minutes "error [260] connection" and the phone keeps its' black screen until I soft-reset it.
Can anyone help me get a hardspl onto my phone? I would really like to try WM6.5. I've read many SPL-guides already, so you don't have to point me to them
(even that on modmydiamond.info)
Thanks in advance!

esset said:
Hiya XDA
I've been trying all evening to get any HardSPL onto my Diamond without success, everytime I try I get to 0% and after a few minutes "error [260] connection" and the phone keeps its' black screen until I soft-reset it.
Can anyone help me get a hardspl onto my phone? I would really like to try WM6.5. I've read many SPL-guides already, so you don't have to point me to them
(even that on modmydiamond.info)
Thanks in advance!
Click to expand...
Click to collapse
Here's the Tutorial and here's the Troubleshooter. They're both stickies. Please search and read before posting.

Thanks for the quick response, but as I said. I've read all stickies and guides, and it's still stuck at 0%.

esset said:
Thanks for the quick response, but as I said. I've read all stickies and guides, and it's still stuck at 0%.
Click to expand...
Click to collapse
Did you let your device sync with Activesync/Windows Mobile Device Center?
Try recreating the sync pairing.
Try uninstalling the device from PC's Device Manager and reinstalling it and then try recreating the sync partnership.
Try another USB port.

Yes, yes, yes and yes. I even tried doing it on my laptop.
Edit: I even tried flashing down to 1.93 with HTCs official stuff, no success there either

esset said:
Yes, yes, yes and yes. I even tried doing it on my laptop.
Edit: I even tried flashing down to 1.93 with HTCs official stuff, no success there either
Click to expand...
Click to collapse
Another USB cable?
Try manually entering bootloader and connect to PC. The label should say USB not Serial and try from there.

esset,
May I ask what branding/model of the Diamond you own?
I own a pure AT&T model just purchased a week or two ago. And, so far I've also had almost zero luck flashing it. I'm moving from an AT&T Tilt which I've flashed so many times, the USB port is starting to wear down. I've also got a lot of experience with many small computing devices with all types of weird programming and flashing routines, so I'm not a newbie. But the AT&T Fuze just seems to be locked in a way that has yet to be covered by the good XDA folks here. Heck, I can't even dump the shipped ROM off the device to send it here for checking out by the developers. All I've been able to do is flash an odd 1.90 HardSPL that seems to have locked the phone even tighter than before. YUCK!
If you're in this same scenario, I'd suggest patience. Eventually someone with enough knowledge of these devices will be able to help out. It is frustrating though, after flashing the other phone so many times with so many different configurations to be held back on the new one.

tnyynt said:
Try manually entering bootloader and connect to PC. The label should say USB not Serial and try from there.
Click to expand...
Click to collapse
You might find this odd. The down-volume + back arrow key combo doesn't seem to work with some of the new versions of the Diamond. I've tried on two of them, and neither respond to this key combo at startup.
Many times entering the bootloader is not a problem though. The routine does cause the phone to go there. And, I can get it there by other means. Just not via the boot up sequence. This tells me there is something very different about these models....

I tried starting and flashing directly from the bootloader (showing USB), and the phone got to show a percentage field (the one when you are flashing) but same here, is constantly at 0% until the flashing utility times out and tells me to reboot my phone and guides me through steps if it has been semi-bricked (bootloader is the volume down + softreset, right?)
I bought my phone in the first shipment to Sweden, it's not locked to any company, bought it without subscription
Else I just flashed it up to latest ROM from htc.com (still no success with HardSPL ) to 2.03.413.2 SVE (02/06/09)
Radio: 1.09.25.23
Version: 52.51.25.26H
ninjaedit: (In the four-colored bootloader thing it says DIAM100 64M SPL-2.03.0000 MicroP-Diam (LED) v11)
Tell me if you need any other info :]

Here's another indication that the new phones are different. I've copied a DIAMIMG.nbh file to both a flash card inside the phone, and to it's internal memory. (sorry, but the thread on that location is confusing on what memory. I assume like most phones of the past that it's supposed to be the flash card, but "internal memory" is not a flash card.) But, the loader screen always responds with "no image file" when it's called up. So, is there a different name expected now?

put manual hardspl into your device, and click to it from your device..

zerocool81 said:
put manual hardspl into your device, and click to it from your device..
Click to expand...
Click to collapse
Tried that with every Hard-SPL linked to from this thread: http://forum.xda-developers.com/showthread.php?t=415191
Didn't work
Something's changed.

zerocool81 said:
put manual hardspl into your device, and click to it from your device..
Click to expand...
Click to collapse
Hi uhm, was that answer aimed for me or to scottwilkins?
If it was for me, is it possible to flash the mobile directly from the memory-card (or internal flash card)? Else if you mean the "manual make-the-screen-black-and-go-to-bootloader" my screen just goes blank, as when you do it with the RUU, and just stops there. Also seems like it looses the connection via USB doing so too. And flashing through the bootloader directly (volume down at softreset) shows the progressbar on the phone, but steadily at 0% (when trying to flash).

search and download
a) SDA_ApplicationUnlock.exe (Desktopprogram)
b) EnterBootloader.exe (ATTENTION: it must be that for diamond, normaly find by flashing-tools)
connect with active sync and copy EnterBootloader.exe to pda-root.
start SDA_ApplicationUnlock.exe on desktop and follow all but reset (DONT RESET)
start EnterBootloader.exe on pda
if bootloader-Mode and USB-Label than start flashing
wait for response

scottwilkins said:
Tried that with every Hard-SPL linked to from this thread: http://forum.xda-developers.com/showthread.php?t=415191
Didn't work
Something's changed.
Click to expand...
Click to collapse
try this.. put this file into internal storage and lounch this from ppc
http://rapidshare.com/files/207721836/SSPL-Manual.rar

okokur said:
search and download
a) SDA_ApplicationUnlock.exe (Desktopprogram)
b) EnterBootloader.exe (ATTENTION: it must be that for diamond, normaly find by flashing-tools)
connect with active sync and copy EnterBootloader.exe to pda-root.
start SDA_ApplicationUnlock.exe on desktop and follow all but reset (DONT RESET)
start EnterBootloader.exe on pda
if bootloader-Mode and USB-Label than start flashing
wait for response
Click to expand...
Click to collapse
I tried what you suggested, I successfully unlocked the phone (and did Not reboot it). Ran the bootloader; and the screen just went black, as usually, and nothing more happens

zerocool81 said:
try this.. put this file into internal storage and lounch this from ppc
http://rapidshare.com/files/207721836/SSPL-Manual.rar
Click to expand...
Click to collapse
That program makes the Fuze screen just turn black and do nothing. Cool, huh
Seems that the newer stock ROMS might be blocking something... hmmmm....

Well, crap!
I just figure out where my whole problem is...
The Fuze (my phone) = The Raphael
NOT the Diamond.
I just scrolled down the forum list, saw a phone that looked like mine and went there. DOH!
I feel like a total dumb-ass.
If I'd scrolled just a bit farther down the XDA forum, then I'd seen the Raphael phone.
Holy Cow! Go ahead, say it, I deserve it...
Thanks for all the help otherwise. It was a learning experience for me....

esset said:
I tried what you suggested, I successfully unlocked the phone (and did Not reboot it). Ran the bootloader; and the screen just went black, as usually, and nothing more happens
Click to expand...
Click to collapse
hi,
i think, you have the wrong bootloader.
i find this and try it by me self. this brings your fone definitly to bootloader.
than you can start manualy the hard spl by normal description way.
http://rapidshare.com/files/208123046/EnterBootloader.exe.html

okokur said:
hi,
i think, you have the wrong bootloader.
i find this and try it by me self. this brings your fone definitly to bootloader.
than you can start manualy the hard spl by normal description way.
http://rapidshare.com/files/208123046/EnterBootloader.exe.html
Click to expand...
Click to collapse
Thanks, but that file takes me into the bootloader, and when I start flashing the percentage is still at 0% until the software times out. Same as before, just the usual "going-into-the-bootloader".

HTC Diamond bricked?

i have flashed my diamond with the official htc rom
im on 1.40 olinex, now i can only access boot mode.
sometimes if i leave the phone without a battery for like 2 hours, when i turn it on i see the "touch diamond" logo, if i leave the battery for a whole day i see the windows mobile loading screen, but then suddenly the phone turns off
plz if you have any idea about this problem help me

If you can acces bootloader, then your diamond isn't bricked.
Try the unsigned version of olinex' hard-SPL and flash the ROM again.
Good luck!

hey ElCondor, im on 1.40 olinex, i cant flash it because it is protected
how can i flash the unsigned 1.40 olinex one?

Here is a link to the unsigned hard-spl.
Make sure you download "Unsigned-Hard-SPL-Diamond-OliNex.zip".
Follow the instructions:
1) Download, extract to an empty folder.
2) Run RomUpdateUtility.exe, Have Phone Synced with PC (go into bootloader, connect your cable, then the word "serial" in bootloader will change into "USB".
3) follow steps, check device for prompts after PC shows loading bar. it should go to black screen now.
4) SPL flashes, device automatically reboots, job done.
5) to confirm you got it installed, go into bootloader mode (volume down + reset, i.e. press volume down button and reset then keep holding the volume down key until you see tricolour screen) and verify the screen shows 1.40.OliNex.
note: you will not see the SPL version during normal boot, that is the OS version, not SPL!
Installing this will hard-reset your device.
Best Regards,
ElCondor

when i flashed the unsigned 1.40 olinex, the device rebooted
windows mobile is preparing your phone for first use
htc logo
phone went off :S
will try flashing rom again

flashed ROM again, now it wont boot up no htc diamond logo no nothing
i can access boot mode (1.40 olinex unsigned now i guess)
is there no way i can boot the rom? what seems to be my problem?

mzaouar said:
flashed ROM again, now it wont boot up no htc diamond logo no nothing
i can access boot mode (1.40 olinex unsigned now i guess)
is there no way i can boot the rom? what seems to be my problem?
Click to expand...
Click to collapse
Hi
If you can access the bootloader then your device is not bricked. Therefore download a rom of your choice then connect to the usb when on the bootloader then use a Diamond custom RUU (normally come with the rom) follow the steps. After rom updated make a hard reset. I hope it will run ok.
Looks your symtons are showing like your rom corrupted.
Good luck

i am flashing this ROM
RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
the newest one i downloaded from htc. com is giving me rom update error
would you recommend a good rom for my phone?

after flashing and reflashing and hard resetting with the ROM showed above
still cant boot in ROM mode, only in boot mode
el condor sabes, anything ???
should i flash with a new rom, and if yes with which?
(diam100 olinex 1.40 unsigned)

Perhaps try a custom rom?
I found when flashing to an official rom from a different provider (my phones telstra and was flashing 3) I had issues with the rom booting and had to follow a post on here somewhere to get it working, however When I had this problem I could still flash any custom rom with no issues.
Unless its for warrenty purposes then its probably not worth flashing the "original" perhaps flash A.Z.T.O.R. = Alpha Zero Tweaked Official Roms which are close to the original but with benifits of being modded for faster speed etc.
Anyways Im no pro but I know what you are going through and I am trying to find the link to the fix to your problem as I also had the problem. But recommend trying a custom rom to confirm the problem is the same as mine.
For the record now I do not use official roms anymore, with WM6.5 running well for the most part on the diamond its a great step backwards when you revisited 6.1

flashed to SwiftBL-WWE-Diamond-v7.5-Full-16MbPP
still same problem can only go to boot mode
i am feeling there is no solution to my problem ?
is the phone bricked? :S

If you haven't done yet, flash the hard-spl I posted. Just do it, re-instal the hard-spl! Then, flash another ROM, maybe (as said before) your rom is corrupted.
The problem here is, that you first installed the unsigned hard-spl, and then flashed a corrupt rom. In that way, the hard-spl can be damaged too, so flash the hard-spl again and flash another rom should work.
Good luck!

I did :S but to no avail, I will do it again fingers crossed :S !
update: weird, everytime after i flash the hardspl unsigned, it boots up, i can see the "touch diamond" logo
windows mobile booted.. preparing your device..
update 2: windows mobile booted, installing everything
omgomg it looks it might work this time, fingers still crossed !!
el condor !! haha fingers crossed
update 3 :S : windows mobile installed properly, phone rebooted, went again and opened it, then i heard a sound from the speaker and the phone turned off :S
it must work what could the problem be now? last step !

Okay try a hard-reset, maybe that works.
If not, then flash hard-spl again, then hard-reset, then flash another ROM. Then hard reset. Then try again if it boots.
Is your battery enough charged? That could also be a reason.

did not work, wont even boot up
when i said if i leave battery out and such, I thought it might be hardware/heat related
http://www.htcwiki.com/thread/2069847/HTC+Diamond+-+Severe+Crashing+Problem,+maybe+heat+related
could this be it? will i have to send my phone for repairs?
because maybe when WinMo was loaded, the phone started to heat up and it shut down
so basically my solution is not a software fix??

If none of the tips worked, and you have the same problems as described in the site you linked, then you probably have to send it back.
One thing you could do: Try if the other hard-spls (1.37 and 1.93 unsigned) are working for you.
I'm sorry for you, maybe someone more skilled than me (like cmonex or olipro) knows how to solve your problem.

it's alright :S i thank you for all the help you have offered !
( it is customizing right now) but i expect it to reboot anytime now

worked, 5 minutes into winmo it restarts

mzaouar said:
worked, 5 minutes into winmo it restarts
Click to expand...
Click to collapse
oh,does it worked?how can you get it work?Please tell me....my diamond could only get in the bootloader yet....

mzaouar said:
worked, 5 minutes into winmo it restarts
Click to expand...
Click to collapse
OK good to hear that, if you have any more questions in future, just ask!
Glad to be of some help
msvb007 said:
oh,does it worked?how can you get it work?Please tell me....my diamond could only get in the bootloader yet....
Click to expand...
Click to collapse
Ive sent you a pm, there's no need to use this thread for your questions because the problem in this thread is solved.
So take a look at your pm!

Help! Sprint TP2 Not Loading After Attempted ROM Update

Hello,
I am using a Sprint TP2 and just tried changing my ROM from Stock to Energy Leo ROM.
I installed the Hard SPL Unlocker and it seemed to work fine. I then went to flash the new ROM and it seemed to load fine, but upon restarting, it locked on the "Touch Pro2" startup screen.
I am thinking that I probably installed the GSM version of the new ROM, so I will need to install the CDMA version.
I am able to get to the bootloader screen and when I go to directly change the ROM from the GSM version to the CDMA version, the RUU seems to be working, appears to be able to access my phone, and starts the install.
My phone switches to the progress bar screen BUT both my PC and my phone stay at 0% until my PC displays an error message (#262).
What do I do to either re-install the Sprint Stock ROM or get my phone to change to the CDMA version of the ROM??
HELP!!!!
Thanks so much.

Why can't you get the device into bootloader mode?
I read a post about someone else that did the same thing, flash gsm rom to cdma device, and he put his device into bootloader and flashed the cdma rom and everything was back to normal.
I have to try a couple times to get to bootloader mode because its hard to hold down the power button, vol down and press the stylus reset, sometimes i get a friend to help and works out fine.

I'm able to get the device into Bootloader mode but it doesn't do anything when I use the RUU (my phone is attached to my PC via usb), it stays at 0% and then comes up with an error. I'm going to try to see if I can load the new ROM from my micro SD card.... let's hope it works...
UPDATE:
I put the new ROM nbh file onto my micro sd card and put it into my phone and entered bootloader, it flashed a quick screen that said "Loading" and then "No image file found!" and then returned to the bootloader screen. What can I do???
More info:
My bootloader screen reads:
RHOD400 32M SS_BC
SPL-0.63.0000
MicroP(LED) 0x0A
MicroP(Key) 0x04
TURBO HW/TURBO SW
TP MFG DATA
468,512 751,806
768,180 206,210
194,825 Calibrated

Hello, just wondering if anyone was able to help me. This thread has had many views but no suggestions. Anything is GREATLY APPRECIATED!!
Thank so much!

When you flashed via microSD, did you name the ROM file rhodimg.nbh? It has to be named rhodimg.nbh in order to be detected by the SPL.

Yes, I did make sure that the file was titled that. I'm beginning to think that my phone isn't correctly unlocked, so if that's the case, is there any way of applying Hard-SPL via a Micro SD card?

Did the same mistake, and was also having problems to fix, in my case what was wrong was the card was formated FAT instead of FAT32, after reformat/recopied the CORRECT version of LEO and renamed to RHODIMG.nbh/ Volume Down + Power it worked perfectly!
Hope it helps!

SO CLOSE!! I re-formatted my Micro SD card to FAT-32 and re-inserted the card and loaded my phone into Bootloader and it stayed on the white "Loading" screen with blue letters!!!! GRR!!!! Any ideas? Where can I find a ".nbh" file for the Hard-SPL? Maybe I didn't unlock it correctly??

andrewkariana said:
Yes, I did make sure that the file was titled that. I'm beginning to think that my phone isn't correctly unlocked, so if that's the case, is there any way of applying Hard-SPL via a Micro SD card?
Click to expand...
Click to collapse
Yeah, looking at your bootloader readout that you posted in the third post, I now see that you don't appear to have HardSPL on your device. As far as I know, there's no way to apply HardSPL without being able to boot into Windows Mobile, since HardSPL needs a SSPL to flash it. It seems you should flash back the stock ROM, but unfortunately the stock ROM doesn't seem to exist as an official, signed download. I'm not sure what else you can do to unlock with HardSPL, other than wait for the Sprint 6.5 ROM update (expected by end of Q1 2010).

DaveTheTytnIIGuy said:
Yeah, looking at your bootloader readout that you posted in the third post, I now see that you don't appear to have HardSPL on your device. As far as I know, there's no way to apply HardSPL without being able to boot into Windows Mobile, since HardSPL needs a SSPL to flash it. It seems you should flash back the stock ROM, but unfortunately the stock ROM doesn't seem to exist as an official, signed download. I'm not sure what else you can do to unlock with HardSPL, other than wait for the Sprint 6.5 ROM update (expected by end of Q1 2010).
Click to expand...
Click to collapse
So am I not able to use the stock ROM that I found from a thread (on an outside forum :-/ )??
ISSUE RESOLVED!!!! Thank you, everyone!! This is such an amazing forum!!!! (I ended up just loading the stock rom file that I found. DUH! So much easier than I thought it was going to be)

andrewkariana said:
So am I not able to use the stock ROM that I found from a thread (on an outside forum :-/ )??
Click to expand...
Click to collapse
If it says something like "rebuilt", "reconstructed", or anything that indicates that it was dumped off the phone and rebuilt, then no. See, you need a signed ROM, and dumping a stock ROM off a device and rebuilding it breaks the signature on the ROM, so a stock SPL won't flash it.

vol dn pwr on
all you have to do is hold volume dwn then power on.
fone_fanatic said:
Why can't you get the device into bootloader mode?
I read a post about someone else that did the same thing, flash gsm rom to cdma device, and he put his device into bootloader and flashed the cdma rom and everything was back to normal.
I have to try a couple times to get to bootloader mode because its hard to hold down the power button, vol down and press the stylus reset, sometimes i get a friend to help and works out fine.
Click to expand...
Click to collapse

Same Mistake..
Thank you guys for all your help, I also flashed a GSM rom to my CDMA phone I was scared I had bricked it.. Nobie here but it worked like a charm