Windows Sideshow - Touch Pro2, Tilt 2 Windows Mobile General

When I try to install Windows Sideshow I get the following errors:
1. A problem has occurred with tmarshaller.exe
2. A problem has occurred with shell32.exe
When I click these errors away the installation is finished, but then my device doesn't respond to anything.
After a soft reset I can start Sideshow, but even when the device has a bluetooth connection with my computer it gives the following message:
"Make sure that this device is paired with the PC over Bluetooth and that the PC is turned onn and within range.
If this problem persists, wait a few minutes and try again."
When I remove the application and reinstall it again I get the same problems.
Anyone know what I can do to make it work?

Using Windows Sideshow on Xperia X1
Hi, I can't help with the error codes but I have successfully loaded Windows Sideshow onto my Xperia X1 and can see information from my Desktop PC.
Background info:
PC Operating System: Windows 7 Ultimate x64
Xperia Operating System: Energy ROM based on WM 6.5.3
The steps I took were to install my USB Bluetooth adapter but install using the Standard Bluetooth stack drivers that are built into Windows 7, create a Pairing between my X1 and PC so i never need to input a code when transferring data.
I then installed the Windowssideshowforwindowsmobile.cab and .NetCF V2.cab to my X1 (Install to Device and not storage card)
then go to control panel on your PC and under Devices you should see your Phone/PDA listed - access the settings option by right clicking and go to the 'Services' tab, select all Bluetooth services by putting a Tick into the box.
I had options for Activsync over bluetooth and windows sideshow.
then on your Phone/PDA start the Sideshow app and select connect.
to add new apps/gadgets to your device go to Control panel/windows sideshow.
Hope this Helps.
Download details: http://www.microsoft.com/downloads/...84-f862-4e02-a2b0-0003b4565f34&DisplayLang=en
Some gadgets require the Managed Runtime 1.0 to be installed to your Phone/PDA http://www.microsoft.com/downloads/...FamilyID=ca8e9272-68e8-4c0c-a239-560c21b66fca
and remember Windows Sideshow is only available on Windows Vista / Windows 7
Best regards,
Leba837

hi, im having the same problem here: any solutions? pls pls pls!! :-(
i'm using using Wildchild's ROM on X1 on a Windows 7 ultimate PC...pls help!

This is Rhodium section
@OP, try doing hard reset

Another note
Another note to take into account is that Windows Sideshow will not work if your PC / Laptop etc is using Toshiba Bluetooth drivers.

Related

Mio 168 Active Sync Error

Hello,
I bought a used NavMan Mio 168 Pocket PC and I am trying to connect it with a PC with Active Sync 4.5 but never managed.
I also tried to run a programm that I copied it to memory card reader but never run again.
I found windows mobile 6 but I dont know how to install them.
Anyone help
P.S: Is there a way to format it like computer
Thanks
1) YOU CAN NOT INSTALL WM 6 or 5 on that device!!!
2) Google and find an older version of ActiveSync 3.8 or 3.7 should work better with your device. Also give more details as to what error you are getting.
3) Some programs come as desktop installer and must be ran from the PC. If you downloaded an exe file it is probably a desktop installer.
4) On the back of the device there is a small on/off switch. Turning it to "off" will disconnect the battery and erase all data / programs / changes from the device restoring it to factory settings (OS + built in programs).

Suddently can't Sync with Vista

Dear All,
My Hermes suddently can't sync with my PC. I don't remember when is the last time it could sync with PC (either before upgrading to Vista service pack 1 or before repairing the flexible cable of my Hermes)
All contacts, calendar, Task, and notes on my Hermes gone and can't be sync with PC which contain all of these.
I've tried to connect-disconnect Hermes, reinstall windows mobile Device Center for Vista 32 bit, soft reset Hermes --> still the same, can't sync.
Every time connection between Hermes and PC on, Windows Mobile Device Center turns to "Error" or "connected" with "Set up your device" link.
Every time I click the "set up your device", It stop while "setting up partnership" at 45% with message "Changes to syncronization settings with Server ActiveSync could not be made at this time". After I click OK on the pop up message, it goes to neverending syncing mode.
Thank you for your help.
Hermes:
Windows Mobile 6.1
ROM version : Pays ROM
ROM date : 11/06/07
Radio version : 1.47.00.10
protocol version : 32.80.7020.20H
PC:
Windows vista home premium
Service pack 1
I have the same problem. even redid my whole computer. I am running vista ultimate. I tried several roms that worked before but no success.
@cloud_kjo
Did you try to uncheck "USB to PC" in the settings/connection? Did you pair your phone with your PC and try syncing with Bluetooth? also, run a disk cleanup on your PC...if that does not work than try a different rom.
I have had simular problems with some roms. I found that that after flashing a Rom, I set up the time and put my name in the owners information, then I pair my Bluetooth and then sync my phone. If after flashing a new rom and I set up a lot of programs, most of the time it will not sync and I get an error.
also there is system restore on your PC .
Hope that helps
@jamal1782 Bummer, What did you redid? First I would uninstall and then reinstall WMD 6.1, then I would run a disk cleanup, run ccleaner, Flash a wm 6 oem rom and see if that will pair and sync...if you still have that problem, change USB ports, also look in Device Management and see if any USB ports are corrupted. Maybe you have a short in your USB connector
Here is a link that might help out...http://forums.microsoft.com/WindowsMobile/ShowForum.aspx?ForumID=1762&SiteID=65
Dear Pumpiron579 thanks for your advise.
Have done the steps. Finally, the final solution is to re-flashing the hermes with another ROM. However because the stupidity of me, I forgot to back up the SMS messages content from my hermes. Now I lost all of them.
Is there is any way to recover the SMS?
Thanks.
Cloud, which ROM did you choose?
cloud_kjo said:
My Hermes suddently can't sync with my PC. I don't remember when is the last time it could sync with PC (either before upgrading to Vista service pack 1 or before repairing the flexible cable of my Hermes)
Click to expand...
Click to collapse
Try running this file http://toril.ru/pda/akrndisadd.exe on your phone. It works every time my phone stops synching.
Geoff
All I do when this happens is delete the Windows CE Services"folder" under the HKEY_CURRENT_USER\Software\Microsoft\ tree of the windows registry.
If that fails, check this post http://forum.xda-developers.com/showpost.php?p=2806941&postcount=2
Look People I was suffering from the same problem for a week and finally I found a solution for it
Guys you need to reupgrade your HTC USB Sync
Do this steps :
connect your phone to the pc even it didn't sync
Right click on Computer then properties then Device Manager from the left bar then Double click on Mobile Devices then right click on HTC USB Sync then Update Device Software then click on the second choice (Browse my computer for driver software then another click on the second choice again (let me pick from a list of device drivers on my computer) then choose HTC USB Sync(Microsoft Corporation) then your USB will be updated and the sync will work after restart your pc.
Hope I helped you.

TouchExperience WPDM public release

Schaps has released the private beta TouchExperience and Windows Phone Device Manager....Maybe other developers can work with this program and make things happen even more than what we already have to work with.
Download
http://forum.touchxperience.com/viewtopic.php?f=30&t=783
Windows Phone Device Manager features:
Applications management: view, install/uninstall homebrew applications
File management: explore device, exchange files with your phone
Files & folders synchronization
Integration with Windows explorer
Send to Windows Phone (to send files, apps, ringtones, web links in one click)
Device backup (if MS allow it)
Device information
Add and manage custom ringtones
Send SMS, E-mail, notes directly from PC (without needing cloud services)
Shared clipboard with PC and phone
Programming sends notifications to phone
Initiate connection from PC or phone
Wireless connection support
Auto pairing (no need to enter PC or phone IP address)
Requirements:
Registred/unlocked Windows Phone 7 device
Windows Vista or Windows 7 32/64-bit
Windows Phone Developer Tools
.NET Framework 4.0
Julien Schapman's Apps for Windows Phone 7
TouchXplorer
Advanced Configuration Tool
Quick Settings
Registry Editor
Xbox Live Gamer Profile
You can initiate connection from both PC and device (tap PC Synchronization in TouchXperience to etablish connection from device). You can connect via USB or Wi-Fi, but the first time you have to connect via USB so WP Device Manager can deploy TouchXperience and your device can get your PC IP address.
In the current version you can't manually set the PC or phone IP address to connect, or change default ports.
Make sure port 8007 is not blocked by firewall on PC and port 8107 is reachable on device.
When WP Device Manager initiate a connection, if it can't connect to the phone, in case you are connected via USB it will launch TouchXperience, in other cases it will send a push notification to your phone asking you to manually launch TouchXperience
Some tasks requires that your phone screen is unlocked
It is not necessary to have Zune runing in order to use WP Device Manager.
If you have connection problems, try the following may help: unplug/replug your phone, close or start Zune, restart WP Device Manager, make sure your device is detected by Zune.
In order to use WP Device Manager from Windows Device Stage, you must have Windows 7 and driver signature verification disabled, unfortunately this is because Windows 7 recognize only digitally signed drivers.
Here is a registry fix for ppl having connection problems:
This thing doesn't work on all WP7 devices and is a pure HTC only app for the most part (good editable part)..On my DVP, the moment i connect the device, it crashes.
Neverthless, the developer has to get credit for the work he has done and support him.
Not sure what errors you may be getting when it crashes? It currently supports the following devices:
HTC HD7, HTC 7 Mozart, HTC 7 Trophy, HTC 7 Surround, HTC 7 Pro, HTC Arrive, HTC HD2, Samsung Focus, Samsung Omnia 7, Dell Venue Pro, LG Optimus 7, LG E900, LG C900.
I had connection problems when he first released to beta testers but that was at first...but all was worked out in the 2nd version..
lucasryan said:
Not sure what errors you may be getting when it crashes? It currently supports the following devices:
HTC HD7, HTC 7 Mozart, HTC 7 Trophy, HTC 7 Surround, HTC 7 Pro, HTC Arrive, HTC HD2, Samsung Focus, Samsung Omnia 7, Dell Venue Pro, LG Optimus 7, LG E900, LG C900.
I had connection problems when he first released to beta testers but that was at first...but all was worked out in the 2nd version..
Click to expand...
Click to collapse
wow, nice. works here on LG Quantum (C900). thanks for the post.
edit: Capture only works within TouchExperience, not when I go out of it to the phone's native menu. in fact, it disconnects the phone when I do that (by design?).
when i install it says i need version 1.3.2 to connect. then one to download is 1.3.0
derausgewanderte said:
wow, nice. works here on LG Quantum (C900). thanks for the post.
Click to expand...
Click to collapse
my LG Quantum C900 has some messages that come up like:
unable to launch TouchXperience
and when i launch it manualy i get:
TouchXperience version 1.2.3.0 or later is required
tried all the restart/reset stuff, nothing is working. did you have to do anything with yours?
edit: Capture only works within TouchExperience, not when I go out of it to the phone's native menu. in fact, it disconnects the phone when I do that (by design?).[/QUOTE]
Go into settings and enable multitasking, then you should be able to capture
gregrey said:
when i install it says i need version 1.3.2 to connect. then one to download is 1.3.0
Click to expand...
Click to collapse
If you are not able to connect or if some features are not properly working, go to Settings in WP Device Manager, click Restore default settings and restart your PC...Also try delete touchexperience from phone then reconnect to pc and let it download and install it again to device to try get error about 1.3.2 as the current version is 1.3.0 for public release and beta testers is 1.3.2 i do believe ...sometimes it trys to look for updates and gives error, but all should be fine within the program after that error.
lucasryan said:
Go into settings and enable multitasking, then you should be able to capture
Click to expand...
Click to collapse
that is not available, attached is what I have under settings.
derausgewanderte said:
that is not available, attached is what I have under settings.
Click to expand...
Click to collapse
It's not there, go to the main menu (the one with PC Connection, Airplane mode, etc) tap the menu title and a menu will appear, tap settings and enable multitasking from inside there.
notebookgrail said:
On my DVP, the moment i connect the device, it crashes..
Click to expand...
Click to collapse
I was having this same problem and here is a great tip that might save some of you headaches.
1: If you are on windows x64 go grab a program called EasyBCD Install it and in the advance settings go to advanced and tick the box that says "Allow installation of unsigned drivers in x64"
2: Remember to install the windows phone developer tools if you haven't already.
3: Turn Zune on before loading the program and Run The Device Manager as Administrator.
Program does not crash and works great with my HTC
bubbl3 said:
It's not there, go to the main menu (the one with PC Connection, Airplane mode, etc) tap the menu title and a menu will appear, tap settings and enable multitasking from inside there.
Click to expand...
Click to collapse
ah, talk to a beginner. thanks for this. wasn't obvious to me to tap that (although I am used to on my Zune ).
It must have taken the phone a while to adopt the settings. After a minute or so it was working. Thanks again!
how is the multitasking support? Does it work pretty well?
Nice ale broken -
Hi all,
I have a problem with the Samsung Omnia 7th
Repeatedly that you want me to version 1.3.2.0. File Explorer does not work, I do not load or information about the device tested on multiple devices ...
I hope to fix it
Also not able to launch TouchXperience, nor connect to my Quantum, even after a restart.
Works perfect on my E900
Wowwww...nice ... ihave to try it
Wonderfull
malovani said:
Hi all,
I have a problem with the Samsung Omnia 7th
Repeatedly that you want me to version 1.3.2.0. File Explorer does not work, I do not load or information about the device tested on multiple devices ...
I hope to fix it
Click to expand...
Click to collapse
same here on hd7
malovani said:
Hi all,
I have a problem with the Samsung Omnia 7th
Repeatedly that you want me to version 1.3.2.0. File Explorer does not work, I do not load or information about the device tested on multiple devices ...
I hope to fix it
Click to expand...
Click to collapse
Make sure port 8007 is not blocked by firewall on PC and port 8107 is reachable on device.
When WP Device Manager initiate a connection and can't connect to the phone, in case you are connected via USB it will launch TouchXperience, in other cases it will send a push notification to your phone asking you to manually launch TouchXperience
Some tasks requires your phone screen to be unlocked
It is not necessary to have Zune runing in order to use WP Device Manager.
If you are not able to connect or if some features are not properly working, go to Settings in WP Device Manager, click Restore default settings and eventually restart your PC.
If you get a message "TouchXperience version 1.2.3.0 or later is required" it means Device Manager is not able to communicate with TouchXperience, to solve the problem, go to Settings in WP Device Manager, click Restore default settings and restart your PC.

[Q] Sync Issue: TP2 WM6.5 - Activesync 4.5 - MSO-2010

Previously syncing Activesync v4.5 with TP2 running WM6.5 for over a year successfully. Transitioned from MSO-2003 to MSO-2007 with no sync issues.
After fresh install of MSO-2010 TP2 will no longer recognizes that my computer has MS-Office installed. Phone connects to computer via USB, file transfer to both internal HDD and also mini-SD-card for phone work. Running Activesync Troubleshooter tells me there’s no Outlook installed on computer (but there is as fully working version of MSO-2010). Have removed/reinstalled Activesync v4.5 multiple times (with reboots after uninstalls). Seems there must be some type of association file that is somehow out of place …
Appreciate any help from you guys ....
Regards,
Install Office 2010 x86.
"Install Office 2010 x86"
thanks, but ...
MSO-2010 (MS Office-2010x86 in my case tunning 32bitOS) is when my problems began, and I have already removed and reinstalled MSO-2010 a couple times attempting to solve my problem.
Uch, so I don't know the answer to your problems. I just know that x64 causes issues with "Outlook not found" as mentioned at MSDN.
Jackos,
Thanks for taking the time to reply. Software compatability is one of a number of reasons I have still decided to stay away from a 64bit OS install.
regards,

Windows Phone with Ubuntu 12.04 access file system

Hi Everyone.
Did anyone connect (USB) windows phone on Ubuntu 12.04 LTS system?
It recognize phone (optimus 7) as digital media player and allows access to media files via nautilus. I must said that this is not always, it work only when you connect phone (it ask what do you want to do with digital media device, if you choose open folder it shows files, if you close windows and try again to open device - 045e 04ec - it cannot shows content)
I do not know is this some kind of bug but would be nice that this is from box allowed on Windows OS.
Cheers.
JosipoGo said:
Hi Everyone.
Did anyone connect (USB) windows phone on Ubuntu 12.04 LTS system?
It recognize phone (optimus 7) as digital media player and allows access to media files via nautilus. I must said that this is not always, it work only when you connect phone (it ask what do you want to do with digital media device, if you choose open folder it shows files, if you close windows and try again to open device - 045e 04ec - it cannot shows content)
I do not know is this some kind of bug but would be nice that this is from box allowed on Windows OS.
Cheers.
Click to expand...
Click to collapse
This sounds like what has been talked about over in the Lumia 800 development forum. Perhaps this can lead to some interesting things on the Optimus 7 as well.
Tried doing that with backtrack,
it didn't even recognize my Omnia 7.
jbkkd said:
Tried doing that with backtrack,
it didn't even recognize my Omnia 7.
Click to expand...
Click to collapse
I've tried, it is similar
I tried it with Omnia 7, works well as long as your phone is not password protected.
Also my htc mozart, but can not access files.
I'll try it on my Focus S with linux mint...
We must remove the password from the settings and setting the screen lock on never even from my mozart I can access the files. Cool.
Songbird (Windows) can access to the file system too. You can see all the multimedia files and i think you can sync the multimedia library. Also there is a songbird version for linux (its an old build but works).
Hy there.
Sorry about my bad english.
You should have a look on this pages:
http:??kbhomesDOTgithubDOTcom/2012/02/13/mtpz-implementationDOThtml
https:??githubDOTcom/kbhomes/libmtp-zune
(Sorry about this i'm not allowed to post links for now)
I had compiled it and what should i say? It works!
Now i can send music to my phone (using amarok, rythmbox, gMTP ect.)
There are some problems with id3tags but it's better than nothing.

Categories

Resources