Related
I tried to root it a few weeks ago, but it didn't quite work, so i did a hard reset.
Everything works, except the phone won't boot with the SD card in it (it just keeps looping at the "MyTouch 3g Slide" screen. And the phone will not recognize any SD card. i've tried three. the original samsung 8gb, a kingston 2gb, and a 16gb one. all the cards work perfectly on my computer, one is used to run android on my HD2. so i KNOW it works. I've tried reformatting it also, and that didn't work (FAT32).
how can i fix this?
HotEspresso said:
I tried to root it a few weeks ago, but it didn't quite work, so i did a hard reset.
Everything works, except the phone won't boot with the SD card in it (it just keeps looping at the "MyTouch 3g Slide" screen. And the phone will not recognize any SD card. i've tried three. the original samsung 8gb, a kingston 2gb, and a 16gb one. all the cards work perfectly on my computer, one is used to run android on my HD2. so i KNOW it works. I've tried reformatting it also, and that didn't work (FAT32).
how can i fix this?
Click to expand...
Click to collapse
Can you get to the bootloader and recovery with the SD card in it? If you don't know how hold down the vol down button and power button, then use the volume rocker to go down to recovery and pres power again to select it. If you can't access the bootloader with an sd card in it I would suspect a hardware issue but I'm not sure. If you can get into recovery and flash clockworkmod recovery, then re-download and flash a ROM, such as cyanogenmod 6.1.0 or CR_mod or something. Just to rule out a ROM error.
Might want to try a full wipe again using recovery if you can get into it.
MusicMan374 said:
Can you get to the bootloader and recovery with the SD card in it? If you don't know how hold down the vol down button and power button, then use the volume rocker to go down to recovery and pres power again to select it. If you can't access the bootloader with an sd card in it I would suspect a hardware issue but I'm not sure. If you can get into recovery and flash clockworkmod recovery, then re-download and flash a ROM, such as cyanogenmod 6.1.0 or CR_mod or something. Just to rule out a ROM error.
Click to expand...
Click to collapse
in order to flash CM or clockworkmod recovery, i need to have my phone rooted, correct? what's the easiest way?
HotEspresso said:
in order to flash CM or clockworkmod recovery, i need to have my phone rooted, correct? what's the easiest way?
Click to expand...
Click to collapse
In the Dev section for our phone THIS method.
Also, check the slide rom bible for some other stuff you might need, like the stock rom.
Oh, I assumed you were rooted. When you power on with Vol Down, the first screen is hboot... isn't there a full wipe option there, therefore not requiring the OP to go into recovery?
Yeah, there is a wipe option in Hboot.
fermunky said:
Oh, I assumed you were rooted. When you power on with Vol Down, the first screen is hboot... isn't there a full wipe option there, therefore not requiring the OP to go into recovery?
Click to expand...
Click to collapse
nope. not yet, at least. i'm working on it now, but i keep running into problems. the latest one, is when i run the "adb push exploid /sqlite_stmt_journals" command in step 4, it just says "error: device not found". i'm pretty sure i've done everything right.
is there anyone willing to help walk me through this with an instant messenger or something? i can probably figure it out eventually, but help would be much appreciated.
also, when i plug the phone into the computer, the phone charges, but doesn't recognize the phone. windows (7) says it can't identify it. and when i unplug the phone, it resets.
HotEspresso said:
nope. not yet, at least. i'm working on it now, but i keep running into problems. the latest one, is when i run the "adb push exploid /sqlite_stmt_journals" command in step 4, it just says "error: device not found". i'm pretty sure i've done everything right.
is there anyone willing to help walk me through this with an instant messenger or something? i can probably figure it out eventually, but help would be much appreciated.
also, when i plug the phone into the computer, the phone charges, but doesn't recognize the phone. windows (7) says it can't identify it. and when i unplug the phone, it resets.
Click to expand...
Click to collapse
Yeah you have to download the drivers for the phone. Here's the link: http://www.htc.com/us/support/t-mobile-mytouch-3g-slide/downloads/
Download the sync update, it'll install the drivers necessary for adb to work
MusicMan374 said:
Yeah you have to download the drivers for the phone. Here's the link: http://www.htc.com/us/support/t-mobile-mytouch-3g-slide/downloads/
Download the sync update, it'll install the drivers necessary for adb to work
Click to expand...
Click to collapse
still doesn't work. nothing shows up when i run "adb devices", and it says "error: device not found" when i run the adb push... command.
any ideas?
HotEspresso said:
still doesn't work. nothing shows up when i run "adb devices", and it says "error: device not found" when i run the adb push... command.
any ideas?
Click to expand...
Click to collapse
Do you have USB debugging enabled on your phone?
Sent from my T-Mobile myTouch 3G Slide
MusicMan374 said:
Do you have USB debugging enabled on your phone?
Sent from my T-Mobile myTouch 3G Slide
Click to expand...
Click to collapse
yes i do. i've done everything right.
if it helps, hboot does see my SD card. so i know it's not a hardware issue.
is there any way i can load the original stock firmware? i loaded ESPRIMG.zip and it worked, but didn't do anything.
It must be an issue on the computer side with your computer not recognizing your phone. I'm on my phone at the moment, with an almost dead battery (bad cm6.1 battery life) but when I get to a computer I'll look it up, there's something else you might have to install. Are you on xp vista or 7?
Sent from my T-Mobile myTouch 3G Slide
thanks. i've got windows 7. i can try using another computer. i'll post when i try that.
i called HTC and i'm still under warranty. but will they be able to see my root attempt and not repair it? i don't wanna be charged the $40 "triage fee"
HotEspresso said:
thanks. i've got windows 7. i can try using another computer. i'll post when i try that.
i called HTC and i'm still under warranty. but will they be able to see my root attempt and not repair it? i don't wanna be charged the $40 "triage fee"
Click to expand...
Click to collapse
Yes, they will see your root attempt and say you voided your warranty, but it's easy to unroot. Although I don't think your phone is the issue here, since you can still see your microsd card when you plug into your computer, right? Like if you mount USB storage, it works?
Also, try following the instructions in the link I'm about to paste, I used it and it worked fine for me: http://androidforums.com/t-mobile-mytouch-slide/90832-adb-drivers.html
MusicMan374 said:
Yes, they will see your root attempt and say you voided your warranty, but it's easy to unroot. Although I don't think your phone is the issue here, since you can still see your microsd card when you plug into your computer, right? Like if you mount USB storage, it works?
Also, try following the instructions in the link I'm about to paste, I used it and it worked fine for me: http://androidforums.com/t-mobile-mytouch-slide/90832-adb-drivers.html
Click to expand...
Click to collapse
not from the phone. but i can take the SD card out and put it into my computer.
i'll try the link now.
nope. i already had that driver. but i installed it again anyway. no luck. how can i restore to good enough condition so HTC will fix it?
HotEspresso said:
nope. i already had that driver. but i installed it again anyway. no luck. how can i restore to good enough condition so HTC will fix it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=746577 Flash that, it will flash the pure stock w/OTA update, without root or wifi tether, it's just pure stock. They don't think twice about it.
And if you cant mount usb storage on your phone and see it on your computer, then I think your phone does have an issue with the usb port. Either that or it's a rom issue? Could be something corrupted.
MusicMan374 said:
http://forum.xda-developers.com/showthread.php?t=746577 Flash that, it will flash the pure stock w/OTA update, without root or wifi tether, it's just pure stock. They don't think twice about it.
And if you cant mount usb storage on your phone and see it on your computer, then I think your phone does have an issue with the usb port. Either that or it's a rom issue? Could be something corrupted.
Click to expand...
Click to collapse
it MIGHT be a usb issue, but i doubt it. it can't be a rom issue, because i haven't rooted the phone.
when i hit apply update.zip in recovery, it just says "can't find /sdcard/update.zip". it's definitely there, in the root of the SD card.
any ideas?
EDIT: i just used hboot to load ESPRIMG.zip. i THINK that worked. but it still says firmware 2.1-update 1. will that be enough to clear it for HTC?
I messed it up ultimately. I wanted to repartition the external sd using "aparted", instead I formated and repartitioned the internal one.
My situation now: tab doesn't boot into system, doesn't show in adb, doesn't show in flashtool (offline or online), doesn't boot to recovery, doesn't boot to download and doesn't show in windows. There's only one sign of life: when I plug it into a usb cable which is attached to my PC I get the windows "connect sound". And I get the disconnect/connect sounds when turning it off while attached to PC.
I assume that I can throw away my tab. If you know better, don't be afraid to tell me!
android404 said:
I messed it up ultimately. I wanted to repartition the external sd using "aparted", instead I formated and repartitioned the internal one.
My situation now: tab doesn't boot into system, doesn't show in adb, doesn't show in flashtool (offline or online), doesn't boot to recovery, doesn't boot to download and doesn't show in windows. There's only one sign of life: when I plug it into a usb cable which is attached to my PC I get the windows "connect sound". And I get the disconnect/connect sounds when turning it off while attached to PC.
I assume that I can throw away my tab. If you know better, don't be afraid to tell me!
Click to expand...
Click to collapse
Ouch.
You've tried all the button combos?
You could try the warranty... If they can't get into it either, then it probably won't matter if your rooted or not.
android404 said:
I messed it up ultimately. I wanted to repartition the external sd using "aparted", instead I formated and repartitioned the internal one.
My situation now: tab doesn't boot into system, doesn't show in adb, doesn't show in flashtool (offline or online), doesn't boot to recovery, doesn't boot to download and doesn't show in windows. There's only one sign of life: when I plug it into a usb cable which is attached to my PC I get the windows "connect sound". And I get the disconnect/connect sounds when turning it off while attached to PC.
I assume that I can throw away my tab. If you know better, don't be afraid to tell me!
Click to expand...
Click to collapse
When you connect to computer do you see any devices in Device Manager?
You should still be able to get into download mode and use "upgrade recovery" in lg mobile tool.
id10terror said:
When you connect to computer do you see any devices in Device Manager?
Click to expand...
Click to collapse
Hi. Actually, it does appear here, as qhsusb_dload. That must be a good sign..?
android404 said:
Hi. Actually, it does appear here, as qhsusb_dload. That must be a good sign..?
Click to expand...
Click to collapse
Good sign, yes, but will probably be difficult to recover from, might be better off just doing a warranty replacement.
Another option is to use a current version of Ubuntu or similar linux distro to see if you can access partitions from there. I remember something similar on a buddy's HTC phone a couple years back and was able to get him back up and running, so might be a similar issue here.
id10terror said:
Good sign, yes, but will probably be difficult to recover from, might be better off just doing a warranty replacement.
Another option is to use a current version of Ubuntu or similar linux distro to see if you can access partitions from there. I remember something similar on a buddy's HTC phone a couple years back and was able to get him back up and running, so might be a similar issue here.
Click to expand...
Click to collapse
Ok. I installed a virtual ubuntu and after work tomorrow i'll follow this http://forum.xda-developers.com/showthread.php?t=2582142 thread to see if it shows me anything. If so I might need halp to find the proper images to push. I found some other potenitally helpful stuff when googling qhsusb_dload. I'll see what where it takes me tomorrow. A replacement is kind of hard to get here in Norway afer my experience.
Thanks for now!
android404 said:
Ok. I installed a virtual ubuntu and after work tomorrow i'll follow this http://forum.xda-developers.com/showthread.php?t=2582142 thread to see if it shows me anything. If so I might need halp to find the proper images to push. I found some other potenitally helpful stuff when googling qhsusb_dload. I'll see what where it takes me tomorrow. A replacement is kind of hard to get here in Norway afer my experience.
Thanks for now!
Click to expand...
Click to collapse
Good find! If that works out for you, maybe you can do a How To incase anyone encounters the same issue down the road.
Let me know if you need any partitions, although you should be able to grab most of them from any of my flashable zips. Just get them from the flash folder in the zip.
Good luck and godspeed! :fingers-crossed:
id10terror said:
Good find! If that works out for you, maybe you can do a How To incase anyone encounters the same issue down the road.
Let me know if you need any partitions, although you should be able to grab most of them from any of my flashable zips. Just get them from the flash folder in the zip.
Good luck and godspeed! :fingers-crossed:
Click to expand...
Click to collapse
I think that will not work.
qhsusb_bulk is different from qhsusb_dload.
Newer qualcomm SOC has some "rescue" modes to recover fom bad flash. If the internal flash/eMMC can´t be accessed the SOC "bootROM" activates the qhsusb_dload mode. To get the device to "live" again is needed to use a qualcomm program to flash a qhsusb_bulk "driver" to the internal eMMC to activate the mass storage device...
There is a Korean Note2 qhsusb_dload topic about this here on xda... http://forum.xda-developers.com/showthread.php?t=1914359
The problem is find the correct flasher binary to upload to the SOC, the right "driver" to flash and the correct partition layout of the internal flash/eMMC.
It´s better send to warranty replace...
android404 said:
Ok. I installed a virtual ubuntu and after work tomorrow i'll follow this http://forum.xda-developers.com/showthread.php?t=2582142 thread to see if it shows me anything. If so I might need halp to find the proper images to push. I found some other potenitally helpful stuff when googling qhsusb_dload. I'll see what where it takes me tomorrow. A replacement is kind of hard to get here in Norway afer my experience.
Thanks for now!
Click to expand...
Click to collapse
Hello,
i am having the same problem here, I flashed by mistake the wrong system files for V500 instead of VK810, when i was trying to flash twrp, any fix for the QHSUSB-BULK? or did you go through the warranty?
[Q] E980 bricked - Computer says "unknown device" - Only boots into Recovery and DL
My wife somehow managed to bork her Optimus G Pro. She was running rooted stock, and the phone ended up somehow booting to CWM. She said she "picked a few selections", and the phone won't get past CWM now.
I can't do the mobile flash tool because every time I connect the phone, it somes up as Unknown Device. This is after I updated the drivers on both computers. Tried various ports & USB cables, same thing. MY E980, by the way, shows up fine in Device Manager.
I've tried restoring a previous backup, but it still boots right back to recovery. For some reason, the phone doesn't recognize the external card, or I would have tried making a backup on the other phone with the bootloader included, but I have no way of getting it onto the broken phone, unless I can push it via adb somehow.
Anyway, I appreciate any help anyone can give
ixijimixi said:
My wife somehow managed to bork her Optimus G Pro. She was running rooted stock, and the phone ended up somehow booting to CWM. She said she "picked a few selections", and the phone won't get past CWM now.
I can't do the mobile flash tool because every time I connect the phone, it somes up as Unknown Device. This is after I updated the drivers on both computers. Tried various ports & USB cables, same thing. MY E980, by the way, shows up fine in Device Manager.
I've tried restoring a previous backup, but it still boots right back to recovery. For some reason, the phone doesn't recognize the external card, or I would have tried making a backup on the other phone with the bootloader included, but I have no way of getting it onto the broken phone, unless I can push it via adb somehow.
Anyway, I appreciate any help anyone can give
Click to expand...
Click to collapse
If the message you are referring to is one that pops up using a windows computer. I have seen it most of the times I have flashed back to stock. Unknown device, device can't be recognized, something not installed, etc. Carrying on with the restore method even so has also worked every time.
---------- Post added at 01:18 PM ---------- Previous post was at 01:13 PM ----------
Return to stock method: http://forum.xda-developers.com/showthread.php?t=2420219
abumy said:
If the message you are referring to is one that pops up using a windows computer. I have seen it most of the times I have flashed back to stock. Unknown device, device can't be recognized, something not installed, etc. Carrying on with the restore method even so has also worked every time.
---------- Post added at 01:18 PM ---------- Previous post was at 01:13 PM ----------
Return to stock method: http://forum.xda-developers.com/showthread.php?t=2420219
Click to expand...
Click to collapse
Yep, that's the message. I'm running Windows 7.
I'll give it a shot when I get home, but without the device showing up in the com port section of device manager, I can't change the phone over to port 41, right?
I have a TWRP backup from my other E980 that I included the Bootloader option in the backup. Is there any way to push that to the phone using ADB?
I don't know if OP has the same problem as mine. My phone just keep boot into CWM all the time. No matter which rom I flash.
And I Finally found a method to solve this problem, please look here:
http://forum.xda-developers.com/showpost.php?p=49370751&postcount=70
It salve my phone and I don't have to use the LG tools
@ixijimixi
laofan said:
I don't know if OP has the same problem as mine. My phone just keep boot into CWM all the time. No matter which rom I flash.
And I Finally found a method to solve this problem, please look here:
http://forum.xda-developers.com/showpost.php?p=49370751&postcount=70
It salve my phone and I don't have to use the LG tools
@ixijimixi
Click to expand...
Click to collapse
Reading that post, it sure seems like what I'm going through. I'll have to give it a shot tonight. Either way, thanks for the response. This thing has me pulling my hair out.
ixijimixi said:
Reading that post, it sure seems like what I'm going through. I'll have to give it a shot tonight. Either way, thanks for the response. This thing has me pulling my hair out.
Click to expand...
Click to collapse
before you boot into system, make sure you already have one system installed( I did once wipe system and fogot to install a rom..)
At least that post is working for me! Now I am using TWRP,
laofan said:
before you boot into system, make sure you already have one system installed( I did once wipe system and fogot to install a rom..)
At least that post is working for me! Now I am using TWRP,
Click to expand...
Click to collapse
No luck with that post. Followed every step on two different computers, but neither computer will recognize it (keep getting that "unknown device" error in windows).
I saw a post somewhere that someone had luck formatting their system drive in Recovery, but that seems a little bit drastic to me. I'll probably try uninstalling and reinstalling all the drivers again first. And more swearing. LOTS more swearing...
ixijimixi said:
No luck with that post. Followed every step on two different computers, but neither computer will recognize it (keep getting that "unknown device" error in windows).
I saw a post somewhere that someone had luck formatting their system drive in Recovery, but that seems a little bit drastic to me. I'll probably try uninstalling and reinstalling all the drivers again first. And more swearing. LOTS more swearing...
Click to expand...
Click to collapse
Did you install LG driver in those two computer?
That post has cover issues when device is not recognized. If that doesn't help, you need to go back to stock using files in the General section
I'm also having the same problem. Can I run those adb commands on a Ubuntu machine?
ixijimixi said:
No luck with that post. Followed every step on two different computers, but neither computer will recognize it (keep getting that "unknown device" error in windows).
I saw a post somewhere that someone had luck formatting their system drive in Recovery, but that seems a little bit drastic to me. I'll probably try uninstalling and reinstalling all the drivers again first. And more swearing. LOTS more swearing...
Click to expand...
Click to collapse
try this one, use the TWRP method. ( I got into recovery bootloop again today, my computer could not see my phone at all. And I accidently press continue on OTA... f**k, then phone run into recovery for 2 hours.)
This method help me out even when computer could not see your device.
http://forum.xda-developers.com/showthread.php?t=2451696
laofan said:
Did you install LG driver in those two computer?
That post has cover issues when device is not recognized. If that doesn't help, you need to go back to stock using files in the General section
Click to expand...
Click to collapse
Right, but if my computer isn't connecting to my phone (except to show it as an "Unknown Device"), and ADB isn't connecting, and none of the recoveries see the ext. SD card, how do I get the files across?
laofan said:
try this one, use the TWRP method. ( I got into recovery bootloop again today, my computer could not see my phone at all. And I accidently press continue on OTA... f**k, then phone run into recovery for 2 hours.)
This method help me out even when computer could not see your device.
http://forum.xda-developers.com/showthread.php?t=2451696
Click to expand...
Click to collapse
Holy crap...that idea with the TWRP terminal command got me up and booting! So glad that I kept TWRP on there!
For some reason, it's still not reading either the SD card or recognizing the device on USB, but at least this is progress, and at least I can run the thing.
*update* and now it seems to be reading the SD card. At least with that and wifi, I'll be able to move files to/from the phone. I'm going to try reinstallng drivers. With all the reinstalling, uninstalling, and swearing I've done lately, I think there's a good chance that'll work.
ixijimixi said:
Holy crap...that idea with the TWRP terminal command got me up and booting! So glad that I kept TWRP on there!
For some reason, it's still not reading either the SD card or recognizing the device on USB, but at least this is progress, and at least I can run the thing.
*update* and now it seems to be reading the SD card. At least with that and wifi, I'll be able to move files to/from the phone. I'm going to try reinstallng drivers. With all the reinstalling, uninstalling, and swearing I've done lately, I think there's a good chance that'll work.
Click to expand...
Click to collapse
well You should owe me 8 thanks hit for saving your phone..:fingers-crossed: LOL
I would also recommend reinstall drivers, then reboot computer( it is important), and try different USB ports on your PC. my computer just won't recongize my phone on one port, but it does on the other. God knows why...
laofan said:
well You should owe me 8 thanks hit for saving your phone..:fingers-crossed: LOL
I would also recommend reinstall drivers, then reboot computer( it is important), and try different USB ports on your PC. my computer just won't recongize my phone on one port, but it does on the other. God knows why...
Click to expand...
Click to collapse
Heheheh, yeah, I was going to, but then I read your previous sig. Perfectly happy to ignore.
My google-fu failed me major league on this mess. I'm just hoping it's not a busted USB port on the phone.
ixijimixi said:
Heheheh, yeah, I was going to, but then I read your previous sig. Perfectly happy to ignore.
My google-fu failed me major league on this mess. I'm just hoping it's not a busted USB port on the phone.
Click to expand...
Click to collapse
Try different USB ports on PC. When my PC could not see my phone, I also panic and thinking that the USB port on the phone goes wrong.
Then I switch the port which my mouse is usually hook up. Bang! Windows is installing driver and few seconds Iater I was accessing the files on the phone.
Just give it a try.
My signature is just for fun...Emm, I should change it to " hit thanks twice if you like my post "..
laofan said:
Try different USB ports on PC. When my PC could not see my phone, I also panic and thinking that the USB port on the phone goes wrong.
Then I switch the port which my mouse is usually hook up. Bang! Windows is installing driver and few seconds Iater I was accessing the files on the phone.
Just give it a try..
Click to expand...
Click to collapse
Well, I'm out of ports to try on my work computer. I'll try on my home computer later on. It didn't read it last night...but then again, the phone wasn't booting last night either
My signature is just for fun...Emm, I should change it to " hit thanks twice if you like my post "..
Click to expand...
Click to collapse
"Hit the thanks button like a rat pressing a lever for a nugget of food, thanks"
I bricked my at&t htc one m9 while trying to a rom . It is s-on and the bootloader is unlocked . Now my computer fails to reconiges it , i download this RUU with no lucky RUU_HIMA_UL_L51_SENSE70_ATT_MR_Cingular_US_2.11.502.18 furtherst i get is to accept the linse. When i try to go into recovery from bootloader it shows a red triangle with a exclamation point . when i plug my fone up and enter this commands nothing happends .
adb devices............ Nothing shows up
adb get-state,,,,,,,, Nothing
Can some one please remote control my computer to help me out . RUU not working
Rename RUU to OPJAIMG.zip...and place it on your external sd card using a pc reader...
Then boot device into download mode and auto flash the rom....g
Thank you but my computer no longer reads my phone sd or even shows up . Recovery is no longer an option as it only shows a red triangle with a explation point in the middle . When i put adb devices nothing shows up or adb get-state show nothing at all . Only thing im able to do is sideload but when i try to it shows it not a signed software and abort update. I think i no longer have any rom just a build number shows up when i open up htc nero,
Send it to htc.
Sent from my HTC One M9 using Tapatalk
chemo713 said:
Thank you but my computer no longer reads my phone sd or even shows up . Recovery is no longer an option as it only shows a red triangle with a explation point in the middle . When i put adb devices nothing shows up or adb get-state show nothing at all . Only thing im able to do is sideload but when i try to it shows it not a signed software and abort update. I think i no longer have any rom just a build number shows up when i open up htc nero,
Click to expand...
Click to collapse
What I mean is....take sd card out of your phone and place the file to it using a PC card adapter.
Once the file has been loaded to the card and renamed to OPJAIMG.zip....then put it back into your powered off phone and boot into your bootloader.....and see if the file will flash....g
gregsarg said:
What I mean is....take sd card out of your phone and place the file to it using a PC card adapter.
Once the file has been loaded to the card and renamed to OPJAIMG.zip....then put it back into your powered off phone and boot into your bootloader.....and see if the file will flash....g
Click to expand...
Click to collapse
it says E:failed to map file
chemo713 said:
it says E:failed to map file
Click to expand...
Click to collapse
Ouch....
You may be sending that phone in for repair....g
chemo713 said:
I bricked my at&t htc one m9 while trying to a rom . It is s-on and the bootloader is unlocked . Now my computer fails to reconiges it , i download this RUU with no lucky RUU_HIMA_UL_L51_SENSE70_ATT_MR_Cingular_US_2.11.502.18 furtherst i get is to accept the linse. When i try to go into recovery from bootloader it shows a red triangle with a exclamation point . when i plug my fone up and enter this commands nothing happends .
adb devices............ Nothing shows up
adb get-state,,,,,,,, Nothing
Can some one please remote control my computer to help me out . RUU not working
Click to expand...
Click to collapse
What did you do?
does your computer reconiges your phone in bootloader mode?
chemo713 said:
it says E:failed to map file
Click to expand...
Click to collapse
if you are using a card above 32gb it won't work, has tyo be 32gb or smaller(SDHC). 64gb is SDXC.
also you need to boot it into download mode for the phone to pick up the file. if it picks it up you will see an option to press volume up to continue
Aldo101t said:
if you are using a card above 32gb it won't work, has tyo be 32gb or smaller(SDHC). 64gb is SDXC.
also you need to boot it into download mode for the phone to pick up the file. if it picks it up you will see an option to press volume up to continue
Click to expand...
Click to collapse
Not so sure of the entire truth in this. I'm using a 128gb card with no issues. The problem i have is my pc won't recognise it. Otherwise it works as it should.
Sent from my HTC One M9 using Tapatalk
shivadow said:
Not so sure of the entire truth in this. I'm using a 128gb card with no issues. The problem i have is my pc won't recognise it. Otherwise it works as it should.
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
remove the card from the phone and use an adapter and transfer the file to the card from your computer, if you think this is not true about the size of the card, then you can keep your phone in the state it's in now, up to you. I told you what Jesus told John, The Truth
when youre in recovery mode, just hold the power button and press volume up once. Should get you into recovery
Skickat från min iPad med Tapatalk
Arthas92 said:
What did you do?
does your computer reconiges your phone in bootloader mode?
Click to expand...
Click to collapse
yes but only show ruu version no htc sense or andriod version
Aldo101t said:
remove the card from the phone and use an adapter and transfer the file to the card from your computer, if you think this is not true about the size of the card, then you can keep your phone in the state it's in now, up to you. I told you what Jesus told John, The Truth
Click to expand...
Click to collapse
I already stated that my pc cannot see the 128gb card.
How far can you get with the device?. Bootloader? (vol+ & power once), download mode? (vol- & power once) , does it even try?.
Is there any change on your pc when you plug the device into a usb on the motherboard while the device is in either download mode or bootloader? Any noise etc?
Remove htc sync but keep its drivers installed.
Sent from my HTC One M9 using Tapatalk
shivadow said:
I already stated that my pc cannot see the 128gb card.
How far can you get with the device?. Bootloader? (vol+ & power once), download mode? (vol- & power once) , does it even try?.
Is there any change on your pc when you plug the device into a usb on the motherboard while the device is in either download mode or bootloader? Any noise etc?
Remove htc sync but keep its drivers installed.
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
You don't have a card reader on your computer?
As I said before if you even get the Ruu on the sd card a 128gb the phone will not pick it up when you boot to download mode, you need 32gb or smaller
your saying after you remove the card from your phone, your computer won't see it? If so then your card reader needs a driver update.
gregsarg said:
Rename RUU to OPJAIMG.zip...and place it on your external sd card using a pc reader...
Then boot device into download mode and auto flash the rom....g
Click to expand...
Click to collapse
will it work with a 128 sim card
chemo713 said:
will it work with a 128 sim card
Click to expand...
Click to collapse
Really.. He told you in the previous post that 128gb cards wont work. You can try it but a lot of people report that it isn't working on cards above 32gb.
Beamed in by telepathy.
gregsarg said:
Rename RUU to OPJAIMG.zip...and place it on your external sd card using a pc reader...
Then boot device into download mode and auto flash the rom....g
Click to expand...
Click to collapse
chemo713 said:
will it work with a 128 sim card
Click to expand...
Click to collapse
That should be 0PJAIMG.zip (first character is ZERO, not the letter O).
Delete this post
I accidentally drowned my phone. It powers up to the point I need to give my password to unlock it. Unfortunately the touch screen is dead. I have ADB installed to my laptop but I don't know how to get access to my files. Any help is so welcome right now, I don't even have a replacement phone.
iPap said:
I accidentally drowned my phone. It powers up to the point I need to give my password to unlock it. Unfortunately the touch screen is dead. I have ADB installed to my laptop but I don't know how to get access to my files. Any help is so welcome right now, I don't even have a replacement phone.
Click to expand...
Click to collapse
You could try using your phone with computer mouse and OTG cable.
Xokoz said:
You could try using your phone with computer mouse and OTG cable.
Click to expand...
Click to collapse
Hmm, is there a software I have to use?
iPap said:
Hmm, is there a software I have to use?
Click to expand...
Click to collapse
Your screen works but it doesn't recognize touch, right? If so, you can just enable MTP on your phone with mouse and then connect it to your laptop and access the files from there.
And no, I don't think any mouse require software to work if used with OTG cable.
E: https://www.androidcentral.com/10-basic-terminal-commands-you-should-know
You can try adb push/pull method though. Haven't done it myself so I can't be much help with that.
Xokoz said:
Your screen works but it doesn't recognize touch, right? If so, you can just enable MTP on your phone with mouse and then connect it to your laptop and access the files from there.
And no, I don't think any mouse require software to work if used with OTG cable.
Click to expand...
Click to collapse
Well it used to work, not right now. It vibrates sometimes when I press the power button, so it's not 100% dead yet. So as soon as I connect it via OTG I will have the option to access it? Interesting...
iPap said:
Well it used to work, not right now. It vibrates sometimes when I press the power button, so it's not 100% dead yet. So as soon as I connect it via OTG I will have the option to access it? Interesting...
Click to expand...
Click to collapse
If your phone boots up and you can see your screen working normally except for the touch part, then yes. But if you don't have OTG cable or mouse now and you have to order them, you might want to try those adb commands in link I edited to my previous comment.
Xokoz said:
If your phone boots up and you can see your screen working normally except for the touch part, then yes. But if you don't have OTG cable or mouse now and you have to order them, you might want to try those adb commands in link I edited to my previous comment.
Click to expand...
Click to collapse
I'll try to use the ADB as I don't have an OTG cable. I'll try it now, thank you.
Edit: It won't communicate with the device with 'adb devices'. I guess I'm in trouble...
iPap said:
I'll try to use the ADB as I don't have an OTG cable. I'll try it now, thank you.
Edit: It won't communicate with the device with 'adb devices'. I guess I'm in trouble...
Click to expand...
Click to collapse
Have you installed TWRP?
Xokoz said:
Have you installed TWRP?
Click to expand...
Click to collapse
Yes, I try to boot into TWRP but no chance. I think it's dying.
iPap said:
Yes, I try to boot into TWRP but no chance. I think it's dying.
Click to expand...
Click to collapse
Oh, that is actually a bad sign. I was wondering if you had your phone decrypted by any chance so you could've just booted into TWRP and copied internal storage to your laptop from there.
Xokoz said:
Oh, that is actually a bad sign. I was wondering if you had your phone decrypted by any chance so you could've just booted into TWRP and copied internal storage to your laptop from there.
Click to expand...
Click to collapse
I'll just let it dry in rice for a couple of days and will try several stuff again. Ill get back as soon as I have news. Thanks mate.
I do not know how high your geek-level is, but I would recommend booting twrp, decrypt the data partiton with adb and pull the complete data partition to the PC:
1. Get a bootable twrp e.g. fastboot boot twrp-XX.img
2. adb shell twrp decrypt <Password>
3. adb pull /dev/block/dm-0 ./decrypted-data.img
(Credits go to stackoverflow)
If this does not work I would attach an USB Hub after booting into twrp and attach a mouse and a storage device to the hub. (And a keyboard)