I also wanna know if we can do this...
I just want the original australian (optus) CSC back... cause I flashed over it not knowing what it is. Well, at least my phone works fine, but I'm a bit scared that I could have problems in future.
shouldnt your csc be in your stock firmware?.. CSC_xxx.tar should be it unless its missing?
raspdeep said:
shouldnt your csc be in your stock firmware?.. CSC_xxx.tar should be it unless its missing?
Click to expand...
Click to collapse
Can't find our stock firmware for optus. This is our versions:
PDA: DTJF3
Phone: DTJF3
CSC: OPSJF1
I would like a backup too before flashing, any ideas how?
hernit said:
Can't find our stock firmware for optus. This is our versions:
PDA: DTJF3
Phone: DTJF3
CSC: OPSJF1
I would like a backup too before flashing, any ideas how?
Click to expand...
Click to collapse
I would also like to know how to do this.
Root + this perhaps?
Javalu said:
I would also like to know how to do this.
Root + perhaps?
Click to expand...
Click to collapse
up with this program not work
stefano_na said:
up with this program not work
Click to expand...
Click to collapse
check this out mate:
http://forum.xda-developers.com/showthread.php?t=726673&highlight=backup
edit: meh, false alarm but u can always have a look
It seems like pail found a way to do this ... He said that his next rom doesn't require a pre flash
Sent from my GT-I9000 using Tapatalk
Related
Hi
New Euro-FW on samfirmware.com P1000XWJMK:-
http://hotfile.com/dl/111457375/883e471/P1000XWJMK.rar.html
password samfirmware.com
File Size: 205MiB
PDA: XWJMK
Modem : XXJMA
CSC: PHNJM5
ro.build.version.release=2.2
ro.build.date=2011. 02. 22. (ȭ) 11:01:46 KST
boot.bin & Sbl.bin included >>>>>>>>>>>>>>>>>>>Locked bootloader
good news! any improvements?
What he means at the end there is DO NOT USE, IT HAS A LOCKED BOOTLOADER.
Instead, use the safer versions further down the thread.
Sent from my "way better than an iPad" tab.
btyork said:
What he means at the end there is DO NOT USE, IT HAS A LOCKED BOOTLOADER.
Sent from my "way better than an iPad" tab.
Click to expand...
Click to collapse
You can exclude them easily.
- Open P1000XWJMK-REV03-ALL-CL900323.tar.md5 using PowerArchiver but without extracting any
- select both boot.bin & Sbl.bin
- delete
- close file....
- Flash with Odin
btyork said:
What he means at the end there is DO NOT USE, IT HAS A LOCKED BOOTLOADER.
Sent from my "way better than an iPad" tab.
Click to expand...
Click to collapse
means that you have to read this tread first before you try flashing another firmware.....
btyork said:
What he means at the end there is DO NOT USE, IT HAS A LOCKED BOOTLOADER.
Sent from my "way better than an iPad" tab.
Click to expand...
Click to collapse
You could use it - just don't flash the bootloaders! Use Heimdall after extracting the bits you're interested in. Personally I'd avoid it and wait for a modaco-based version with working recovery .
I wait for Roto Version
thanks
hello,
Above all thank you for the rom
I followed your instruction but I get the message in odin
md5 not valid.....
you can flash it as it is and after patch it no problem
go strong. Overcome 1.4.0 is wiating for us with JMK Rom
triplex76 said:
you can flash it as it is and after patch it no problem
Click to expand...
Click to collapse
are you sure that patch still works?
DO NOT DO THAT. Playing with locked bootloaders is almost surest way to get bricked. Either flash with heimdal or wait for a version without bootloader.
overcome - excellent rom!
skdubg said:
go strong. Overcome 1.4.0 is wiating for us with JMK Rom
Click to expand...
Click to collapse
overcome - excellent rom!
wallah said:
hello,
Above all thank you for the rom
I followed your instruction but I get the message in odin
md5 not valid.....
Click to expand...
Click to collapse
Hi Wallah,
Just omit .md5 from the extension
thanks
Galaxyer said:
Hi Wallah,
Just omit .md5 from the extension
Click to expand...
Click to collapse
thank you Galaxyer
but I will be wise and wait for the update to Overcom
Thanks a lot !!!
Where's the fun in wise? I'm gonna try and flash and have a looksee at what's new.
ah do not push me, because I have not asked twice
I am impatient but not want to brick my tab
because I use the tab to phone
wallah said:
ah do not push me, because I have not asked twice
I am impatient but not want to brick my tab
because I use the tab to phone
Click to expand...
Click to collapse
If I get it flashed, and assuming no-one beats me to it, I'll put a "safe" version up
thanks dude
thanks a lot very nice on your part
Seems that only CSC is different from JMI.. Other parts are the same..
Kobo was removed and now there is music store from samsung. And strange program called "nrcnext"..
As I know, I8160ZS*** can't update to Jellybean.
And if I flash samsung official 4.1.2 (with baseband XX***), I will got "baseband unknown".
So I tried to flash CM10.2 by TeamCanjica, and replace /system/lib/tee files to my own.
After reboot, it works very good.
Baseband isn't unknown and IMEI isn't disappear.
But it still no signal.
I think it can be modified by developers.
Is it possible?
--------------
Sorry for my poor English.
No one knows how to fix it?
Or it is impossible?
No one knows how to fix it?
Or it is impossible?
joe820730 said:
No one knows how to fix it?
Or it is impossible?
Click to expand...
Click to collapse
try flash with i9070 4.1.2 TGY modem
yaulapman said:
try flash with i9070 4.1.2 TGY modem
Click to expand...
Click to collapse
do you have try it?
massun said:
do you have try it?
Click to expand...
Click to collapse
I haven't tried it but it seems possible cuz the S advance and the ACE2 uses the same chipset
Hello folks,
New to N7100, just got one out of the box with this info:
Product Code: MWD
PDA: N7100XXDMC3
CSC: N7100OJVDMC1
MODEM: N7100XXDLK7
Click to expand...
Click to collapse
sure it is still on 4.1.2
so according to sammobile, there is a 4.3 update for my product code since December.
OTA and Kies tells that I have the latest version installed.
im puuure stock...
(sure i know about odin....) but im wondering why it would not update normally?
am i missing something with this device?
thx in advance
Samer
EDIT: Oooops sorry Mod please move it to the right section...
Note 2 sure will satisfy you.
For now don't update yet , read about 4.3 and Knox, later decide if you want to update.
Sent from my GT-N7100 using xda app-developers app
samersh72 said:
Hello folks,
New to N7100, just got one out of the box with this info:
sure it is still on 4.1.2
so according to sammobile, there is a 4.3 update for my product code since December.
OTA and Kies tells that I have the latest version installed.
im puuure stock...
(sure i know about odin....) but im wondering why it would not update normally?
am i missing something with this device?
thx in advance
Samer
EDIT: Oooops sorry Mod please move it to the right section...
Click to expand...
Click to collapse
reboot on download mode and tell us what is written there.
or follow this guide and update with kies
note2nooby said:
Note 2 sure will satisfy you.
For now don't update yet , read about 4.3 and Knox, later decide if you want to update.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
no intentions to root...
cosmyndemeter said:
reboot on download mode and tell us what is written there.
or follow this guide and update with kies
Click to expand...
Click to collapse
everything is official
no traces for knox
samersh72 said:
everything is official
no traces for knox
Click to expand...
Click to collapse
try the given guide or do a factory reset and see if OTA works
cosmyndemeter said:
try the given guide or do a factory reset and see if OTA works
Click to expand...
Click to collapse
i will give it a try..
if it didnt work, my only way is with odin
is it safe to flash another 4.3 firmware than my product code (region) without facing imei/connectivity issues like sometimes happen with an s4?
thx
regards
samersh72 said:
i will give it a try..
if it didnt work, my only way is with odin
is it safe to flash another 4.3 firmware than my product code (region) without facing imei/connectivity issues like sometimes happen with an s4?
thx
regards
Click to expand...
Click to collapse
flash with odin a stock official firmware 4.3 (that you want) and is safe
Hello,
I have now a Samsung Galaxy Note 2 ( SHV-250S) model, I have rooted the phone because it was stuck on Samsung logo boot screen.
Now I have fixed that problem with the firmware of Note 2 and it is working.
But now is my problem that I can't use my sim card, it doesn't recognize my sim card ?
it can't find any network providers.
I hope you guys can help me.
Friendly regards,
Serdar
serdar-hd2 said:
Hello,
I have now a Samsung Galaxy Note 2 ( SHV-250S) model, I have rooted the phone because it was stuck on Samsung logo boot screen.
Now I have fixed that problem with the firmware of Note 2 and it is working.
But now is my problem that I can't use my sim card, it doesn't recognize my sim card ?
it can't find any network providers.
I hope you guys can help me.
Friendly regards,
Serdar
Click to expand...
Click to collapse
Are you 100% sure you flashed the right firmware?
Also is your IMEI safe?
Sent from my GT-N7100 using Tapatalk
ceomaverick said:
Are you 100% sure you flashed the right firmware?
Also is your IMEI safe?
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Here are the information that I found on the app "Phone INFO"
What can I do now ? , is this the wrong firmware ?
My IMEI : NULL/NULL
PDA Version : E250SKSUKNF7
Android Version: 4.4.2
Regards,
Serdar
serdar-hd2 said:
Here are the information that I found on the app "Phone INFO"
What can I do now ? , is this the wrong firmware ?
My IMEI : NULL/NULL
PDA Version : E250SKSUKNF7
Android Version: 4.4.2
Regards,
Serdar
Click to expand...
Click to collapse
Flashing correct firmware should not screw up with your IMEI. Find a 4.4.2 stock ROM for your mobile. It should be able to get ur IMEI. Kindly find a correct firmware.
Sent from my GT-N7100 using Tapatalk
ceomaverick said:
Flashing correct firmware should not screw up with your IMEI. Find a 4.4.2 stock ROM for your mobile. It should be able to get ur IMEI. Kindly find a correct firmware.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
I'm now trying flash a another firmware E250SKSUKNE6, I hope this wil solve my problem.
I have installed the new firmware but I have still the same problem. What can I do please help ?
I just went thru this problem
If you flash your stock kernel,modem and recovery via TWRP your sim card will work again.
i searched the forum high ond low and found all 3 zips, flashed them and im back on line. also dont forget to breathe as it cant get any worse
berniebling said:
I just went thru this problem
If you flash your stock kernel,modem and recovery via TWRP your sim card will work again.
i searched the forum high ond low and found all 3 zips, flashed them and im back on line. also dont forget to breathe as it cant get any worse
Click to expand...
Click to collapse
Can you give me the all 3 zips ?
serdar-hd2 said:
Can you give me the all 3 zips ?
Click to expand...
Click to collapse
I cant as they are too large to upload
but all thank go to Zen Arcade, here is a link to the files
http://forum.xda-developers.com/showthread.php?t=2484338
berniebling said:
I cant as they are too large to upload
but all thank go to Zen Arcade, here is a link to the files
http://forum.xda-developers.com/showthread.php?t=2484338
Click to expand...
Click to collapse
Which one I must take ? , there are so many links please help me.
I have the Note 2 E250S version.
Thanks.
serdar-hd2 said:
Which one I must take ? , there are so many links please help me.
I have the Note 2 E250S version.
Thanks.
Click to expand...
Click to collapse
Apologies,
i just saw your model number. for some reason i thought you had a bricked SGH I317
Dis regard all those files!!!!!!!!
You need to find those same exact files for YOUR MODEL DEVICE.
then you need to flash all those files to get your sim card working in your phone.
berniebling said:
Apologies,
i just saw your model number. for some reason i thought you had a bricked SGH I317
Dis regard all those files!!!!!!!!
You need to find those same exact files for YOUR MODEL DEVICE.
then you need to flash all those files to get your sim card working in your phone.
Click to expand...
Click to collapse
No problem anyway thanks for your help , anyone have a solution for me ?
Please help me guys..
Thanks.
serdar-hd2 said:
I have installed the new firmware but I have still the same problem. What can I do please help ?
Click to expand...
Click to collapse
I am sure you flashed this ROM
Model: SHV-E250S
PDA: E250SKSUKNF7
CSC: E250SSKTKNF7
MODEM: E250SKSUKNF4
http://www.sammobile.com/firmwares/3/?download=31755
Your options are limited but you can try out following ROMs:
Model: SHV-E250S
PDA: E250SKSUKNE6
CSC: E250SSKTKNE6
MODEM: E250SKSUKNE5
http://www.sammobile.com/firmwares/3/?download=30343
Model: SHV-E250S
PDA: E250SKSUENC3
CSC: E250SSKTENC3
MODEM: E250SKSUENC3
http://www.sammobile.com/firmwares/3/?download=27356
1.Download both 4.4 and 4.3 ROMs
2.Install Mobile Odin Pro
3.Flash only modem files through Mobile Odin
first E250SKSUKNE5 and E250SKSUENC3 if earlier fails.
Do that and report back. Press thumbs up if you find the suggestions helpful.
Also, there are great many videos on YouTube showing how to restore IMEI. Check them out if you haven't.
ceomaverick said:
I am sure you flashed this ROM
Model: SHV-E250S
PDA: E250SKSUKNF7
CSC: E250SSKTKNF7
MODEM: E250SKSUKNF4
http://www.sammobile.com/firmwares/3/?download=31755
Your options are limited but you can try out following ROMs:
Model: SHV-E250S
PDA: E250SKSUKNE6
CSC: E250SSKTKNE6
MODEM: E250SKSUKNE5
http://www.sammobile.com/firmwares/3/?download=30343
Model: SHV-E250S
PDA: E250SKSUENC3
CSC: E250SSKTENC3
MODEM: E250SKSUENC3
http://www.sammobile.com/firmwares/3/?download=27356
1.Download both 4.4 and 4.3 ROMs
2.Install Mobile Odin Pro
3.Flash only modem files through Mobile Odin
first E250SKSUKNE5 and E250SKSUENC3 if earlier fails.
Do that and report back. Press thumbs up if you find the suggestions helpful.
Also, there are great many videos on YouTube showing how to restore IMEI. Check them out if you haven't.
Click to expand...
Click to collapse
Hello thanks for this information , I downloaded Mobile Odin Pro but it doesn't support my phone.
regards,
Serdar
serdar-hd2 said:
No problem anyway thanks for your help , anyone have a solution for me ?
Please help me guys..
Thanks.
Click to expand...
Click to collapse
bro still you have E250s?
please reply me asap
Hello
Can I replace CSC files through ODIN
My tablet is sm-t837t and I want to take CSC files from SM-835
And replace them during installation
The tablet without ROOT
It's important for me to switch because the SM-385 has more languages I need
Thank you
Yossi
Yes indeed. You must for example flash from sammobile a possible csc-file for this device.
Autodakt said:
Yes indeed. You must for example flash from sammobile a possible csc-file for this device.
Click to expand...
Click to collapse
Hello
Thank you very much for your answer
Do you have experience with this and have done it before?
Thank you
yossiv69 said:
Hello
Thank you very much for your answer
Do you have experience with this and have done it before?
Thank you
Click to expand...
Click to collapse
Yes. I changed CSC on a Tab S4 LTE with 256 GB internal RAM. I flashed it with DBT-Firmware from sammobile and Odin. Now I use it rooted with Magisk and cts-fix with Android 10. I have read much here on XDA. But I´m no expert in this, I understand it in the moment I use it and then I forget the details. Also I changed years ago a Samsung S4 with Alexandres debloated Software.
Autodakt said:
Yes. I changed CSC on a Tab S4 LTE with 256 GB internal RAM. I flashed it with DBT-Firmware from sammobile and Odin. Now I use it rooted with Magisk and cts-fix with Android 10. I have read much here on XDA. But I´m no expert in this, I understand it in the moment I use it and then I forget the details. Also I changed years ago a Samsung S4 with Alexandres debloated Software.
Click to expand...
Click to collapse
Thank you very much
I thought it would be simple
And just need to replace one file instead of another
yossiv69 said:
Thank you very much
I thought it would be simple
And just need to replace one file instead of another
Click to expand...
Click to collapse
No, you can't,it is very dangerous.. (possibly brick)
You can flash CSC only for your model or some "compatible" CSC for your device.(maybe "CSC"from another country)
Download from playstore the " PHONE INFO ☆SAM☆" application, and look there all compatible CSC for your device etc...
daitalos said:
No, you can't,it is very dangerous.. (possibly brick)
You can flash CSC only for your model or some "compatible" CSC for your device.(maybe "CSC"from another country)
Download from playstore the " PHONE INFO ☆SAM☆" application, and look there all compatible CSC for your device etc...
Click to expand...
Click to collapse
thanks for your help