Related
If the desire runs Android on internal memory then wouldnt that be a good base to build an android rom that would replace the WinMo Rom that we currently use? i'm not a big fan of having to run it from a memory card. I know i'll probably get flammed for this but i tried searching for this already and came up with nothing directly related.
Just because one phone does something doesn't mean another phone can do the same.
But to somewhat answer your question, I remember alooong while back that someone said that it would actually run alittle slower if it was internal instead from the sd card.
I also remember nrg once made a super bare bones rom for android that has absolutley nothing but basically the interface. No apps and stuff.
NAND flashing is already being tested. As of this morning it more or less has everything the haret version has... along with better volume control.
okctmaxxer said:
If the desire runs Android on internal memory then wouldnt that be a good base to build an android rom that would replace the WinMo Rom that we currently use? i'm not a big fan of having to run it from a memory card. I know i'll probably get flammed for this but i tried searching for this already and came up with nothing directly related.
Click to expand...
Click to collapse
does it bother you having to load it from sd? i mean, seeing how far along weve come with this, i would think it being on the sd card for the moment wouldnt really be too much of an imminent issue.
but i wouldnt be suprised if it happened in a few weeks o\r so heh
okctmaxxer said:
If the desire runs Android on internal memory then wouldnt that be a good base to build an android rom that would replace the WinMo Rom that we currently use? i'm not a big fan of having to run it from a memory card. I know i'll probably get flammed for this but i tried searching for this already and came up with nothing directly related.
Click to expand...
Click to collapse
I'm not allowed to post links lol but here
forumDOTppcgeeksDOTcom/showthread.php?t=131590
Ragster said:
I'm not allowed to post links lol but here
forumDOTppcgeeksDOTcom/showthread.php?t=131590
Click to expand...
Click to collapse
http://forum.ppcgeeks.com/showthread.php?t=131590
^^ There, clickable
Hello, I have an AT&T Tilt 2 and when I want to boot off xdandroid 2.2.1 I did the .cab file, soft reset, startup.txt, went into the program, update, boot. It types a bunch of codes, and stops at misc_register(): OK. And it stays there as long as I can see! It won't go any further, however, when I restart the phone, it boots normally in to WinMo. I'm running the stock shipped ROM. Does that have anything to do with it? I'm not getting any errors or anything, just stuck at that. And I know it's not me not waiting, because I've sat it down for 2 hours straight! Please help I really want Android on my Tilt 2.
P.S. I've tried RAR and CAB, also the Reference & Froyo!
Try a clean bundle. Format the card using the HP tool. Full format, FAT32.
Also, try this bundle. It's the newest of the new.
thephoneguru said:
Hello, I have an AT&T Tilt 2 and when I want to boot off xdandroid 2.2.1 I did the .cab file, soft reset, startup.txt, went into the program, update, boot. It types a bunch of codes, and stops at misc_register(): OK. And it stays there as long as I can see! It won't go any further, however, when I restart the phone, it boots normally in to WinMo. I'm running the stock shipped ROM. Does that have anything to do with it? I'm not getting any errors or anything, just stuck at that. And I know it's not me not waiting, because I've sat it down for 2 hours straight! Please help I really want Android on my Tilt 2.
P.S. I've tried RAR and CAB, also the Reference & Froyo!
Click to expand...
Click to collapse
Greetings,
I too have a Tilt 2. In the past I've had many problems with xdandroid and other android ports. I personally prefer to use the manual installation, that way I can control what and where things are placed. I'm currently running the the latest FRX04 release on my Tilt2. Here is how I got it working.
1..Download the RAR package.
2..Format your SD Card (not a quick format)
3..Copy the andboot directory to your SD Card
4..Replace the startup.txt with the one attached here.
5..In WinMo run Haret and let it do it's thing.
6..Once in Android test all your apps.
This worked for me, but until I switched to a newer SD Card I would have random reboots and hang ups.
Post any more complications you have I may be able to help you.
dcmedic said:
Greetings,
I too have a Tilt 2. In the past I've had many problems with xdandroid and other android ports. I personally prefer to use the manual installation, that way I can control what and where things are placed. I'm currently running the the latest FRX04 release on my Tilt2. Here is how I got it working.
1..Download the RAR package.
2..Format your SD Card (not a quick format)
3..Copy the andboot directory to your SD Card
4..Replace the startup.txt with the one attached here.
5..In WinMo run Haret and let it do it's thing.
6..Once in Android test all your apps.
This worked for me, but until I switched to a newer SD Card I would have random reboots and hang ups.
Post any more complications you have I may be able to help you.
Click to expand...
Click to collapse
ooooooh!
I will try this startup for my tilt2!
I am having issues like screen landscaping wrong way sometimes etc.
I will report back. Perhaps we get them to pack your startup in the file under "Tilt 2 ATT GSM" or something!
What SD card did you end up getting?
Thanks!
Prodeje79 said:
ooooooh!
I will try this startup for my tilt2!
I am having issues like screen landscaping wrong way sometimes etc.
I will report back. Perhaps we get them to pack your startup in the file under "Tilt 2 ATT GSM" or something!
What SD card did you end up getting?
Thanks!
Click to expand...
Click to collapse
I already had multiple sd cards, Tiad brought it up to try and change my sd card in a conversation the other day, but I'm using a SanDisk 2GB. My SanDisk 4GB is about 4 years old and believe they do wear out. Older cards aren't good for what we need here, since they are basically or on board device storage.
As for the landscaping, sometimes if a hold the phone flat it will switch to landscape left or right, but I usually do not have a problem when I'm holding it in the orientation I'm needing.
That is the same startup file I have used through out 3 different builds. FRX03, FRX04, and FROYO X. I did have overclocking in there, but come to find out it didn't help, I feel that it probably was the cause of a few of my restarts.
I hope everything works out for you. Report back..
dcmedic said:
I already had multiple sd cards, Tiad brought it up to try and change my sd card in a conversation the other day, but I'm using a SanDisk 2GB. My SanDisk 4GB is about 4 years old and believe they do wear out. Older cards aren't good for what we need here, since they are basically or on board device storage.
As for the landscaping, sometimes if a hold the phone flat it will switch to landscape left or right, but I usually do not have a problem when I'm holding it in the orientation I'm needing.
That is the same startup file I have used through out 3 different builds. FRX03, FRX04, and FROYO X. I did have overclocking in there, but come to find out it didn't help, I feel that it probably was the cause of a few of my restarts.
I hope everything works out for you. Report back..
Click to expand...
Click to collapse
will do!
which exact package are you using now?
link appreciated if not already posted above.
Is it a good idea to delete the ts-calibration file as in XDAndroid2.2Froyo.012211 ?
Any other cleanup measures?
Prodeje79 said:
will do!
which exact package are you using now?
link appreciated if not already posted above.
Is it a good idea to delete the ts-calibration file as in XDAndroid2.2Froyo.012211 ?
Any other cleanup measures?
Click to expand...
Click to collapse
I'm using the same package as arrrrrgh posted in Post #2. I just left the touch screen calibration file that came with the package. No other clean up, other than full format to fat32 with your preferred utility.
dcmedic said:
I'm using the same package as arrrrrgh posted in Post #2. I just left the touch screen calibration file that came with the package. No other clean up, other than full format to fat32 with your preferred utility.
Click to expand...
Click to collapse
OK cool, I will give that load a shot tonight.
As of now I am using: XDANDROID.2.2.1.AOSP.FRX03.21.11.10.FULL_PACKAGE
My screen issues are gone now with those tweaks! thanks so much!!!
Although now this thing seems dog slow.
I took out my line "clock-7x00.a11=500" which I think is just stock anyway.
You do not use this command as you noted issues overclocking. Thus yours should be stock speed too right?
This thing is sloooooow now from earlier with my old 'incorrect' stock config in the RAR package.
I also have the weird typing issue in which I press c once (on the hard keyboard slideout), but cccc appears. I think if I type a word super slow, it works better.
So if i type cingular at a decent pace, it will type out 'ccccingularrr'
Any leads on that?
you may need to delete your data.img file and rebuild it with the new startup.txt. that way android is running at stock speed during the setup. shot in the dark.
Sent from my Tilt 2 using the XDA mobile application powered by Tapatalk
Prodeje79 said:
OK cool, I will give that load a shot tonight.
As of now I am using: XDANDROID.2.2.1.AOSP.FRX03.21.11.10.FULL_PACKAGE
My screen issues are gone now with those tweaks! thanks so much!!!
Although now this thing seems dog slow.
I took out my line "clock-7x00.a11=500" which I think is just stock anyway.
You do not use this command as you noted issues overclocking. Thus yours should be stock speed too right?
This thing is sloooooow now from earlier with my old 'incorrect' stock config in the RAR package.
I also have the weird typing issue in which I press c once (on the hard keyboard slideout), but cccc appears. I think if I type a word super slow, it works better.
So if i type cingular at a decent pace, it will type out 'ccccingularrr'
Any leads on that?
Click to expand...
Click to collapse
Holy crap dude... search. You've asked so many questions that have been answered previously, seriously.
With that said, all the issues you describe are all related to the system_server bug. Just make a call to voicemail (or any call really) and it'll clear up. We're looking into the cause and a potential solution.
dcmedic said:
Greetings,
I too have a Tilt 2. In the past I've had many problems with xdandroid and other android ports. I personally prefer to use the manual installation, that way I can control what and where things are placed. I'm currently running the the latest FRX04 release on my Tilt2. Here is how I got it working.
1..Download the RAR package.
2..Format your SD Card (not a quick format)
3..Copy the andboot directory to your SD Card
4..Replace the startup.txt with the one attached here.
5..In WinMo run Haret and let it do it's thing.
6..Once in Android test all your apps.
This worked for me, but until I switched to a newer SD Card I would have random reboots and hang ups.
Post any more complications you have I may be able to help you.
Click to expand...
Click to collapse
Hello, thank you for the quick response. I did exactly what you said. And once I tap Haret it codes and stops at misc_register(): OK still... Any other suggestions? Thank you agian.
it probably doesn't matter, but is your phone all unlocked etc and able to be flashed with any winmo rom?
using olipro?
just trying to think of any differences with our phones.
Prodeje79 said:
it probably doesn't matter, but is your phone all unlocked etc and able to be flashed with any winmo rom?
using olipro?
just trying to think of any differences with our phones.
Click to expand...
Click to collapse
What is unlocked? Isn't that where T-Mobile would be able to use it?? If not, please explain. Sorry for my stupidness. lol
Is it like jailbreaking and/or rooting?
You do not need to do hardSPL unlocking to use Android from the SD card.
I would imagine with NAND builds you would... but since this all runs off the SD card, no need for HSPL.
Assuming you're using that build that was posted in post #2, it should work just fine - did you make any changes to it, or just extract it to the root of your SD and hit haret.exe...?
thephoneguru said:
What is unlocked? Isn't that where T-Mobile would be able to use it?? If not, please explain. Sorry for my stupidness. lol
Is it like jailbreaking and/or rooting?
Click to expand...
Click to collapse
well mainly just the hard SPL unlocking. Not the sim.
very easy.
see the stickies here: http://forum.xda-developers.com/forumdisplay.php?f=490
mainly:
Hard-SPL Unlocker for Rhodium (AT&T Tilt 2) Released and Updated! New FAQ added!
http://forum.xda-developers.com/showthread.php?t=550131
and flashing...
[Resources] Flashing your First GSM Rhodium Rom (For Noobs)
http://forum.xda-developers.com/showthread.php?t=550540
if you do this don't forget to task 29!
http://forum.xda-developers.com/showthread.php?t=649191
I use the energy rom GTX:
http://forum.xda-developers.com/showthread.php?t=562773
I just backed up all my contacts on my SD card with pimbackup and restored them to the new rom....
Again, to thephoneguru - you do not need to do that ^^.
Only if you want to install a custom WinMo ROM, or if you're flashing to full Android (which is not recommended at the moment!) do you need to do HSPL.
arrrghhh said:
You do not need to do hardSPL unlocking to use Android from the SD card.
I would imagine with NAND builds you would... but since this all runs off the SD card, no need for HSPL.
Assuming you're using that build that was posted in post #2, it should work just fine - did you make any changes to it, or just extract it to the root of your SD and hit haret.exe...?
Click to expand...
Click to collapse
I did not make any changes at all I just put the androot directory on the root of my sd, went to the file explorer and tapped haret.exe. Also, the sd card was just formatted (non quick format) to FAT32.
arrrghhh said:
Again, to thephoneguru - you do not need to do that ^^.
Only if you want to install a custom WinMo ROM, or if you're flashing to full Android (which is not recommended at the moment!) do you need to do HSPL.
Click to expand...
Click to collapse
well we get the picture!
its the only difference I can think of in our phones.
I say give it a shot, it is so simple!
Prodeje79 said:
well we get the picture!
its the only difference I can think of in our phones.
I say give it a shot, it is so simple!
Click to expand...
Click to collapse
How is it so simple? Can you explain the procedure? Thank you.
thephoneguru said:
How is it so simple? Can you explain the procedure? Thank you.
Click to expand...
Click to collapse
He posted a lot of links on how to do it... Post #15?
It won't have any effect on your issue tho. It'll only enable you to flash custom ROMs if you so choose to do so.
Let's focus on your issue. Can you tell me where it stops? Does it always stop at the same place? Have you tried different kernels? Any different builds? Have you tried the newest FRX04 build?
ROOTSide ROM
Base Flipside ROM with root/busybox/unknown sources enabled. Only thing different in this rom than rooting it yourself is you get to check/uncheck unknown sources. Yes, that means you can turn unknown sources ON and OFF! I have a clockworkmod recovery folder zipped up for distribution, but I want to post a full-fledged ROM zip file for the masses. PM me, and I will send you the ZIP file that I have right now.
What you get:
base install for the flipside (AT&T) with motoblur ready to set up. It is the exact same thing as doing a factory reset, but you get all the benefits of superuser with busybox and the addead feature of having unknown sources checkbox in the settings.
I will work towards a deoxed version this weekend as well.
No custom bootscreen (yet). No custom anything, really.
Almost There
I am currently in the middle of Deodexing the image. I have added in wifi tethering, and ensured it will have superuser and busybox pre-packaged. Next step is pushing this to my wife's phone and not having her get a pretty brick in return. If all goes well, I will be posting the image by morning light (CST).
Fingers Crossed!
Well
Things didn't go too well with my first build attempt. Appears to be a permission issue with the /system folder. I will sleep on it, and give it a second go in the morning. Sorry for the apparent "tease". If you want a faster build, I could use some other devs working with me.
Hey man, sounds like you're doing great! Keep it up...I already found a way to get the root with unknown sources checked, so i'm just gonna wait for the deoxed version! Hope it goes well as you try again.
Current Issues
unable to deodex the following:
/system/app/AABSync.odex
/system/app/blur-services.odex
Will try to load to phone without dodexing those two files. Hopefully all will go well.
Me too...good luck!!
jonsjava said:
unable to deodex the following:
/system/app/AABSync.odex
/system/app/blur-services.odex
Will try to load to phone without dodexing those two files. Hopefully all will go well.
Click to expand...
Click to collapse
Both of those files are att/moto bloat... just be rid of them
Sent from my MB508 using XDA App
Glad to see some work on this device, I love the form factor but it's obviously not very popular with devs...
Very interested to see this come around. I would like to streamline the wife's phone. Her battery life is a 1/3 of my rooted and flashed X10. Sadly though I am NOT a Dev nor even a cook.
I would have had something sooner, but I ran into issues not related to the ROM. Still working on it. Anybody have an idea for upgrading the CWM from the one we can currently use?
so I was curious, I was able to get to unlock mode with an sqlite thing and it worked just fine for me, but have you been able to knock out the bloat and stuff? cause it sounds like the makings of a custom rom lol
you know what the turtle said.. slowly but surely I will win this race
jonsjava said:
I would have had something sooner, but I ran into issues not related to the ROM. Still working on it. Anybody have an idea for upgrading the CWM from the one we can currently use?
Click to expand...
Click to collapse
Several ppl have said they have run into this problem...don't know what the deal is...
Is it possible to get CM7, or it's a problem with a locked kernel?
Ok, I just got a new phone for the Mrs., so I can break the flipside and unbreak it as much as I like.
Time for some real fearless development lol.
jonsjava said:
Ok, I just got a new phone for the Mrs., so I can break the flipside and unbreak it as much as I like.
Time for some real fearless development lol.
Click to expand...
Click to collapse
sounds good man, keep us posted on progress!!
So check this out...I messaged the guy at modmymobile and asked how things were going becuase I heard people were having problems getting an updated CMW and this is his response:
"been sittin on the updated cwm recovery binaries and been draggin my feet/takin a break the past week or 2. i'll throw something out soon, but cant commit to a timeframe, sorry."
Looks like things are on the up and up...stay patient everyone
GOOD JOB!!!,
We are waiting for the rom
Dukenukemx said:
Is it possible to get CM7, or it's a problem with a locked kernel?
Click to expand...
Click to collapse
I can't install CM7, it reboots and locks up, then I have to reinstall froyo. It never worked when I had eclair either.
CM7 for BRAVO (No modifications)!!
http://www.megaupload.com/?d=HKY4OVEI
Try it and post any issues or problem!!
Well all this is thanks to rdannar, I just take his lastest CM7 rom (CM7 V5) and changed everything back to stock, accelerometer and backlight buttons are working also.
No action snap is installed, to install Fast burst Camera (zoom and autofocus) go to this thread to download it: http://forum.xda-developers.com/showthread.php?t=1272161
I used 2nd init defy and remember to follow the next (always used) steps:
1) copy the rom to your sdcard
2) boot into 2nd init defy -> recovery -> stable recovery
3) wipe data/factory reset
4) wipe cache partition
5) advance -> wipe dalvik cache
6) install zip from sdcard -> choose zip from sdcard
7) reboot
To take photos use Fast Burst Camera.
Do not use Defy Baseband Switcher if your 3G is working!!
I'm liking it so far!
Is there any way future ones (at least once you get to "production" runs) could NOT include the old swype? Sort of a pain to remove it to install Swype beta...
great rom! at the moment after two days of use I have not found still no defect. (before I used the rom v2 of rdannar). thanks
This is sweet. Camera works fine, camera advanced lite also works like a charm.
https://market.android.com/details?id=com.mnapps.cameraadvancelite
Sent from my MB520 using xda premium
mikiemc73 said:
This is sweet. Camera works fine, camera advanced lite also works like a charm.
Click to expand...
Click to collapse
With auto-focus? What resolution?
mikiemc73 said:
This is sweet. Camera works fine, camera advanced lite also works like a charm.
https://market.android.com/details?id=com.mnapps.cameraadvancelite
Sent from my MB520 using xda premium
Click to expand...
Click to collapse
Im using it now in gingerblur and no success, can you tell us if we have to change something?
is there any way i can have live wallpapers back
edit: i cant get cam corder to work and advance camera lite jsut takes the picture but doesnt save it correctly it just makes it corrupt besides that the rom is awesome
mikiemc73 said:
This is sweet. Camera works fine, camera advanced lite also works like a charm.
https://market.android.com/details?id=com.mnapps.cameraadvancelite
Sent from my MB520 using xda premium
Click to expand...
Click to collapse
Camera adv lite did not save pictures when i tried it with this CM7. can anyone confirm?
snnyby said:
Camera adv lite did not save pictures when i tried it with this CM7. can anyone confirm?
Click to expand...
Click to collapse
I confirm its not working
I'm working on getting camera and camcorder working with the stock camera app. I'm using the CM7 v2 rom from rdannar but adjusting some of the files in the system/framework folder. Anyone else tried this?
http://forum.xda-developers.com/showthread.php?t=1326718 Link to thread I was using.
Junkyardjames87 said:
I'm working on getting camera and camcorder working with the stock camera app. I'm using the CM7 v2 rom from rdannar but adjusting some of the files in the system/framework folder. Anyone else tried this?
http://forum.xda-developers.com/showthread.php?t=1326718 Link to thread I was using.
Click to expand...
Click to collapse
Nice, I think everybody should help so we get camera working.
Thats the only issue we have to work with.
Defy developers do the rest!!
STUCK!
Ok I got the camera to preview and it clicks if i use the settings that match the stock Bravo but all it saves as a file is a black screen. Can somebody please give me the stock 2.2.1 sbf file decompiled and changed to a .zip or something.
For something at least I have fast burst camera up and working. Now that I think, I need to get source codes. All of the codes for 2.2.1 camera for bravo, and the codes that are in the gingerbread CM7 rom.
Junkyardjames87 said:
Ok I got the camera to preview and it clicks if i use the settings that match the stock Bravo but all it saves as a file is a black screen. Can somebody please give me the stock 2.2.1 sbf file decompiled and changed to a .zip or something.
For something at least I have fast burst camera up and working. Now that I think, I need to get source codes. All of the codes for 2.2.1 camera for bravo, and the codes that are in the gingerbread CM7 rom.
Click to expand...
Click to collapse
Let me tell you about the source code first:
http://sourceforge.net/projects/bravo.motorola/files/BRAVO ATT/
Get it there.
Once I deodexed a rom but I lost some of the apps to do it, I'll try to do it.
but BravoX RC2 rom's is deodexed:
http://forum.xda-developers.com/showthread.php?t=1065767
I think that could help you, thanks for being working on it.
Im always here
josuearisty said:
Let me tell you about the source code first:
http://sourceforge.net/projects/bravo.motorola/files/BRAVO ATT/
Get it there.
Once I deodexed a rom but I lost some of the apps to do it, I'll try to do it.
but BravoX RC2 rom's is deodexed:
http://forum.xda-developers.com/showthread.php?t=1065767
I think that could help you, thanks for being working on it.
Im always here
Click to expand...
Click to collapse
Thanks! But I'll have to unzip it and see what it all is. I'm not caring about deodexed files I just want something that I can look at on my computer just like the CM7 mods that are zipped and archived. Easier to look at for hours.
Umm, all it gave me was a file called external.tar. What do I do with it? took me two hours to download.
*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*
Ok this is what i'm looking for. Froyo 2.2.1 for the bravo, not in .sbf but in the way it would be if we were using it like the CM7 rom. Opened and in the order just like I can see it on my phone with Super Manager in File Explorer rooted mode. And need to know if some of us want CM7 WITH or WITHOUT BLUR.
I'll just see if I can make two versions. One with and one without so no fighting. But i will need testers.
Junkyardjames87 said:
Thanks! But I'll have to unzip it and see what it all is. I'm not caring about deodexed files I just want something that I can look at on my computer just like the CM7 mods that are zipped and archived. Easier to look at for hours.
Umm, all it gave me was a file called external.tar. What do I do with it? took me two hours to download.
*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*
Ok this is what i'm looking for. Froyo 2.2.1 for the bravo, not in .sbf but in the way it would be if we were using it like the CM7 rom. Opened and in the order just like I can see it on my phone with Super Manager in File Explorer rooted mode. And need to know if some of us want CM7 WITH or WITHOUT BLUR.
I'll just see if I can make two versions. One with and one without so no fighting. But i will need testers.
Click to expand...
Click to collapse
But I think bravox rom is like that. What do you exactly mean?
------------------------------------------------------------------
About external.tar, I havent worked with that before, no codes for me by now, I have just changed files and zipped roms.
Im here to try, my two bravos are fine to test everything.
For me it doesnt matter about having blur or not, but I prefer GINGERBLUR , anyway we need a fully working gingerbread rom. (everthing will come after it)
What I need.
Ok. I need to have the regular 2.2.1 for the bravo in the exact same way as if we downloaded the CM7 rom that is 2.3.4. The regular 2.2.1 that I have now is just the .sbf file for use with RSD Light just in case I really screw up my phone. Just like windows restore............ Anywho i'm working on right now building the stock 2.2.1 bravo file system by using a stock factory bravo and copying all of the root files onto the SD card to put them on my computer. I'll be going through all of the crap and looking at the CM7 roms to find out what is diffrent. I need somebody who can zip the stuff so it can be loaded with 2ndint. This will then allow me to put this newish rom into beta. Or if someone can find or give me the program that zips everything for 2ndint to use. I will attach sometime what I pulled off of my Bravo for a better understanding of what I want.
Junkyardjames87 said:
Ok. I need to have the regular 2.2.1 for the bravo in the exact same way as if we downloaded the CM7 rom that is 2.3.4. The regular 2.2.1 that I have now is just the .sbf file for use with RSD Light just in case I really screw up my phone. Just like windows restore............ Anywho i'm working on right now building the stock 2.2.1 bravo file system by using a stock factory bravo and copying all of the root files onto the SD card to put them on my computer. I'll be going through all of the crap and looking at the CM7 roms to find out what is diffrent. I need somebody who can zip the stuff so it can be loaded with 2ndint. This will then allow me to put this newish rom into beta. Or if someone can find or give me the program that zips everything for 2ndint to use. I will attach sometime what I pulled off of my Bravo for a better understanding of what I want.
Click to expand...
Click to collapse
Ok, I understand now what you mean.
You want to zip the rom and sign it. It is not that?
If you want you can download Cygwin the kitchen its very easy to work with it, but if you want upload some files and let me know where to copy them.
I'll post in some hours where did I get the THE KITCHEN Cygwin, Im going out now!
josuearisty said:
Ok, I understand now what you mean.
You want to zip the rom and sign it. It is not that?
If you want you can download Cygwin the kitchen its very easy to work with it, but if you want upload some files and let me know where to copy them.
I'll post in some hours where did I get the THE KITCHEN Cygwin, Im going out now!
Click to expand...
Click to collapse
Ok i'll do a google search and see what I can do.
CRAP!
Well we'll all have to wait for a while until I get another Bravo. Something, well, someone, who will remain nameless (really not me) decided to wake up in the middle of the night and play with daddys phones on HIS table and CONNECTED to HIS computer. Well it got unplugged and found it's way to another play spot in the bathroom. Can anybody tell me the rest of the story??
Junkyardjames87 said:
Well we'll all have to wait for a while until I get another Bravo. Something, well, someone, who will remain nameless (really not me) decided to wake up in the middle of the night and play with daddys phones on HIS table and CONNECTED to HIS computer. Well it got unplugged and found it's way to another play spot in the bathroom. Can anybody tell me the rest of the story??
Click to expand...
Click to collapse
Oh man, I dont believe it
Now what will we do? Will you buy another one?
---------------------------------------------------------
I dont wanna laught, but was that your wife? did she find something about another woman in your phone?
Women are like that, once something like that happen to me!!
I just bought one! and love CM since the release of my first android phone, the Samsung Galaxy S2
There are only custom roms for the 8.4 and the 10.1 version.
There are no custom ROMs available for this device now, and i hate the slurpy/fancy samsung interface.
I am willing to pay for it, for the first nice and clean nightly CM 11 rom + CWM/TWRP recovery and working Gapps for this device.
This device is out for a while now and there are still no custom roms for.
So i hope there is somebody who can help, to get the custom roms madness for this device getting started.
I got you covered.
I can make a stock custom rom which has all the samsung junk removed so the tablet can go faster.
I want a rooted aosp rom, like cyanogenmod or something.
Are you able to do that?
ExoRRSmits said:
I want a rooted aosp rom, like cyanogenmod or something.
Are you able to do that?
Click to expand...
Click to collapse
Unfortunately, I can't. (I have a 10.1 and I want the same thing). The thing is the processor is a exynos 5 or something like that and it is (as I have read and understood) quite hard to do. I've tried to learn about making it but trust me it is much more harder than it seems. Even my 10.1 doesn't have CM yet. Still if you like I can make a you a stock debloated rom so it will at least run faster than what you have now.
ik4evr2 said:
I got you covered.
I can make a stock custom rom which has all the samsung junk removed so the tablet can go faster.
Click to expand...
Click to collapse
I am very much interested in this thanks!
nickster1 said:
I am very much interested in this thanks!
Click to expand...
Click to collapse
No problem at all. It will take me a day or two.
ik4evr2 said:
No problem at all. It will take me a day or two.
Click to expand...
Click to collapse
Can you make deodex please? I already have the stock debloate, but would be nice to have deodexed rom.
ik4evr2 said:
Unfortunately, I can't. (I have a 10.1 and I want the same thing). The thing is the processor is a exynos 5 or something like that and it is (as I have read and understood) quite hard to do. I've tried to learn about making it but trust me it is much more harder than it seems. Even my 10.1 doesn't have CM yet. Still if you like I can make a you a stock debloated rom so it will at least run faster than what you have now.
Click to expand...
Click to collapse
Well for now it sounds ok to me.
Is it rooted as well?
How debloated is it? Is samsung touchwiz removed?
That's what i'm hating the most. The settings app with tabs, i like the whole settings menu in cm.
And how fast can it see the light?
If its very nice, i can donate something for your good and hard work.
There might be a debloated deodexed rom already here?: http://forum.xda-developers.com/showthread.php?t=2776206
Ludespeed said:
There might be a debloated deodexed rom already here?: http://forum.xda-developers.com/showthread.php?t=2776206
Click to expand...
Click to collapse
No, I tried it, and unfortunately it doesn't work for the 12.2 version. The internal, as well as the external sd card both are locked, meaning you can't even update any apps, or saving any data... you get an error message 110, from Play Store.
ik4evr2 said:
No problem at all. It will take me a day or two.
Click to expand...
Click to collapse
Any luck ?
ExoRRSmits said:
Any luck ?
Click to expand...
Click to collapse
+1!
What about an overclock kernel? I debloated my Galaxy tab 12.2 already but have yet to successfully overclock it. I've been looking everywhere for an improved kernel or something to improve the performance, debloating didn't help it that much so a kernel or custom rom would be the next bet. Anyone point me in the right direction?
In school atm, but had a few mins so I built this: https://drive.google.com/file/d/0B5kaDFDMK0TYci14Nm1EOFFnX2s/edit?usp=sharing
Can't reply to any question atm but will when I get home. Not sure if it will boot.
Download, advance wipe in TWRP (except internal/external storage) and see if it boots to CM. Then post what's working and what's not
Enjoy if it works!
Gotta go
Shaheer said:
In school atm, but had a few mins so I built this: https://drive.google.com/file/d/0B5kaDFDMK0TYci14Nm1EOFFnX2s/edit?usp=sharing
Can't reply to any question atm but will when I get home. Not sure if it will boot.
Download, advance wipe in TWRP (except internal/external storage) and see if it boots to CM. Then post what's working and what's not
Enjoy if it works!
Gotta go
Click to expand...
Click to collapse
Great initiative,
I tried making an install. Unfortunately everything halts at the cm welcome screen with the message "Unfortunately, the process com.android.phone has stopped", Maybe, I'm not too surprised since we're using a wifi-version. But, it actually boots up, so there are great expectations for a cm11 port, within short.
Thanks for all your efforts.
arcadia2uk said:
Great initiative,
I tried making an install. Unfortunately everything halts at the cm welcome screen with the message "Unfortunately, the process com.android.phone has stopped", Maybe, I'm not too surprised since we're using a wifi-version. But, it actually boots up, so there are great expectations for a cm11 port, within short.
Thanks for all your efforts.
Click to expand...
Click to collapse
Hey everyone,
So here is an update: (At school so don't have much time but...) This should fix the phone error. :good: However, I am pretty sure Wi-Fi isn't going to work ATM. Since i'm at school can't download things internet is tooo slow, so what someone can do if they want is to download a touchwiz rom for your device or just plain stock rom. Then, on the download go to /system/etc and there should be a folder called Wi-Fi. Copy that to system/etc in the CM rom. And then flash the CM Rom. If Wi-Fi works go ahead and upload the link and post it here.
Download: https://drive.google.com/file/d/0B5kaDFDMK0TYRmNGUVUxVDloeWc/edit?usp=sharing
Shaheer said:
Hey everyone,
So here is an update: (At school so don't have much time but...) This should fix the phone error. :good: However, I am pretty sure Wi-Fi isn't going to work ATM. Since i'm at school can't download things internet is tooo slow, so what someone can do if they want is to download a touchwiz rom for your device or just plain stock rom. Then, on the download go to /system/etc and there should be a folder called Wi-Fi. Copy that to system/etc in the CM rom. And then flash the CM Rom. If Wi-Fi works go ahead and upload the link and post it here.
Download: https://drive.google.com/file/d/0B5kaDFDMK0TYRmNGUVUxVDloeWc/edit?usp=sharing
Click to expand...
Click to collapse
Just as you suspected the wifi didn't work initially. However, I followed your instructions for the update, and there it was. Here's the link to the updated cm11-4.4.4 w. wifi Currently, there seems to be no access to the internal SD card, as well as the external.
I also have difficulties in finding a compatible gapps, any ideas? Could it be due to the SD card issue? It starts up, but playstore crashes at first search.
arcadia2uk said:
Just as you suspected the wifi didn't work initially. However, I followed your instructions for the update, and there it was. Here's the link to the updated cm11-4.4.4 w. wifi Currently, there seems to be no access to the internal SD card, as well as the external.
I also have difficulties in finding a compatible gapps, any ideas? Could it be due to the SD card issue? It starts up, but playstore crashes at first search.
Click to expand...
Click to collapse
Will post an answer in a while. Leaving school in a min so I was just checking the thread. :fingers-crossed:
After homework and all that i'll upload the updated file when I get a chance to work on it.
Shaheer said:
Will post an answer in a while. Leaving school in a min so I was just checking the thread. :fingers-crossed:
After homework and all that i'll upload the updated file when I get a chance to work on it.
Click to expand...
Click to collapse
Great start Shaheer, apparently I'm running into a lot of the same problems that you initially ran into building the T-520 port.
Could I suggest that you start a thread in the development section for this ROM? I believe that I'm one of the few people having noticed your work, and that's only due to your message. Then we can get a few more people to chip in for heavy testing, at least the initial runs.
It would be good if the gapps along with the SDcard and PC-mount issues could have priority. Once they're up you can at least flash back and forth from the same ROM, without passing through an intermediary stock ROM. Notably, as each flash takes close to 30 min, if not more...However, I can believe they are all the result of the fact that the ROM can't detect the internal SDcard; no card = no mount, no card = no play store download.
On the good side, it seems like the GPS is working, and the bluetooth discovers surrounding devices and besides the mentioned SDcard issue, I have not seen much missing at least mot that can be tested at this point. There's no camera, but that seems to be something most AOSP ROM's for the Samsung tablets are struggling with currently.
Anyway, thanks again, I really appreciate your efforts.
arcadia2uk said:
Great start Shaheer, apparently I'm running into a lot of the same problems that you initially ran into building the T-520 port.
Could I suggest that you start a thread in the development section for this ROM? I believe that I'm one of the few people having noticed your work, and that's only due to your message. Then we can get a few more people to chip in for heavy testing, at least the initial runs.
It would be good if the gapps along with the SDcard and PC-mount issues could have priority. Once they're up you can at least flash back and forth from the same ROM, without passing through an intermediary stock ROM. Notably, as each flash takes close to 30 min, if not more...However, I can believe they are all the result of the fact that the ROM can't detect the internal SDcard; no card = no mount, no card = no play store download.
On the good side, it seems like the GPS is working, and the bluetooth discovers surrounding devices and besides the mentioned SDcard issue, I have not seen much missing at least mot that can be tested at this point. There's no camera, but that seems to be something most AOSP ROM's for the Samsung tablets are struggling with currently.
Anyway, thanks again, I really appreciate your efforts.
Click to expand...
Click to collapse
Hey!,
So I was really busy yesterday evening writing a 3 page essay and doing other homework so I didn't get anytime to work on the rom. My thoughts too were to start a new thread in the dev section for this.
I haven't gotten too far with the T520 port either as i'm still learning CM development. (I'm more used to touchwiz ) I have some time right now so give me a bit and i'll try to get a thread started and update the rom to get SD Card working.
EDIT: Actually, I can't proceed till someone can make sure that Google Play downloads app properly. If it doesn't then I need to work on that before anything or it's going to cause major issues.