Wireless Tethering after using 1.47.651.1 Root Method - EVO 4G Q&A, Help & Troubleshooting

I don't know if the latest root method for OTA 1.47.651.1 (---==={ROOT GUIDE}===--- | 1.47.651.1 ROOT method | has been tested for Wireless Tethering. I would imagine that it doesn't make a difference... root is root, and there isn't much of anything changing on the phone AFAIK...
I've searched the forums and can't seem to find an answer.... probably because this is so new...
When WiFi is off I try wireless tethering and get an error message: Unable to start tethering, please try again. I turn on WiFi and start wireless tethering I get the same error message and WiFi turns off. I've tried this with all of the various connection types: Charge Only, HTC Sync, Disk Drive, and Internet sharing. When I try to select internet sharing, I get the following message: "Error Code 67. Registrationg failure. Your PCS Vision username and/or password may be incorrect. Please try again."
I found This How-To-Guide, which references Toast's method...but I'm curious if there's a difference between that method and the one listed above for the latest OTA.
Thanks.
[EDIT]P.S. I can confirm that WiFi does work. I can connect to local WiFi networks when they are available.

Pezu23 said:
I don't know if the latest root method for OTA 1.47.651.1 (---==={ROOT GUIDE}===--- | 1.47.651.1 ROOT method | has been tested for Wireless Tethering. I would imagine that it doesn't make a difference... root is root, and there isn't much of anything changing on the phone AFAIK...
I've searched the forums and can't seem to find an answer.... probably because this is so new...
When WiFi is off I try wireless tethering and get an error message: Unable to start tethering, please try again. I turn on WiFi and start wireless tethering I get the same error message and WiFi turns off. I've tried this with all of the various connection types: Charge Only, HTC Sync, Disk Drive, and Internet sharing. When I try to select internet sharing, I get the following message: "Error Code 67. Registrationg failure. Your PCS Vision username and/or password may be incorrect. Please try again."
I found This How-To-Guide, which references Toast's method...but I'm curious if there's a difference between that method and the one listed above for the latest OTA.
Thanks.
Click to expand...
Click to collapse
Hi.. looks like you are trying to use the buid in stock (Sprint Hotspot) tethering app.. if this is the case it will not work.. you need to root your phone and once you load a rooted ROM (ex. Fresh 0.5.3 or any other one) use the wifi tether app already included in those ROMs.. sometimes you need to reinstall the wifi app . in that case uninstall the wifi tether app and go to this address on your phone and download the latest app for the Evo. http://code.google.com/p/android-wifi-tether/
hope this helps...
P.S. I attached the app from the address above to the post.. good luck

Ignore jade. He is shilling for fresh. Download the "Wireless Tether" app from the market. That will work.

efuse said:
Ignore jade. He is shilling for fresh. Download the "Wireless Tether" app from the market. That will work.
Click to expand...
Click to collapse
The one he attached is the one from google dev. Same one I use and it works great.

efuse said:
Ignore jade. He is shilling for fresh. Download the "Wireless Tether" app from the market. That will work.
Click to expand...
Click to collapse
I figured as much. I am not using the Sprint app. I've tried the first app listed in the android market, as well as one straight from Google that's 2.0.2. It's supposed to work for the Evo... I have the same problem with both apps.
Which connection type do I need to select on my phone?

efuse said:
Ignore jade. He is shilling for fresh. Download the "Wireless Tether" app from the market. That will work.
Click to expand...
Click to collapse
jejeje.. I did mention any other ROM as well ....
Guess the op can ignore me if he likes but what's the point of rooting if you are not going to check out various other ROMs..

if all the OP is needing is wireless teather then he should have just gone the unrevoked route.

jadehawk said:
Guess the op can ignore me if he likes but what's the point of rooting if you are not going to check out various other ROMs..
Click to expand...
Click to collapse
Not going to ignore you.... not completely. I just want tethering to work so I can test it and see if it's going to work for me. Then i'll mess with other ROMs. The stock Sprint one has too much crap in it... I hate nascar...

Pezu23
I do not know if this matters but are you using a rooted ROM ? I ask because the first time I ran thw wifi tether app it ask for super user access.. maybe you need a rooted ROM flashed on the phone before this app can work.. I have no reference point since I used the toast method to root my phone..
If you can follow toast method of rooting and unlocking the NAND.. you will still have a sprint base (rooted) ROM but this time you can delete the "Nascar app" and anything else you want..

The one in market is not the best one 2.05 pre 2 I think is the best it does infrastructure mode allowing almost any device to connect
Sent from my Evo on on the Now network from Sprint
oh and duck Apple

Dont feel bad Pezu im getting the same errors. No matter which wireless tether app I use, from the market or from code.google Sighhhhhhhhhhhhhhh All I want is wireless tether. LOL. I dont care about custom roms.

dukins said:
Dont feel bad Pezu im getting the same errors. No matter which wireless tether app I use, from the market or from code.google Sighhhhhhhhhhhhhhh All I want is wireless tether. LOL. I dont care about custom roms.
Click to expand...
Click to collapse
If you tried everything, i dont see why you would not take 5 more minutes to load a new rom with wifi already in it.

I had the market version of tether installed and it works fine, but I downloaded the attached APK file (in my evo) and when I tried to open it says:
Open file error
No application can be found to open this file.
Click to expand...
Click to collapse
How do I reset the APK association to make it install properly?

TeknoJnky said:
I had the market version of tether installed and it works fine, but I downloaded the attached APK file (in my evo) and when I tried to open it says:
How do I reset the APK association to make it install properly?
Click to expand...
Click to collapse
you need to install an app like appinstaller from the market to install apps store in the SDcard..

dukins said:
Dont feel bad Pezu im getting the same errors. No matter which wireless tether app I use, from the market or from code.google Sighhhhhhhhhhhhhhh All I want is wireless tether. LOL. I dont care about custom roms.
Click to expand...
Click to collapse
I have the same problem. I am on stock rooted with rooted OTA's...
I did get it working with Fresh, but I was having other problems with Fresh 0.5.3 like the camera would sporadically go out. I guess I may have to reload fresh (which I really liked, by the way)

I rooted using the link in your first post then installed the newest DC rom and now the newest baked rom. Neither allows me to wifi tether (though no errors) as I dont see a network being created. Any ideas? Did I root wrong or screw up my radios?
Thanks!

cool.. ill try that..

Maybe I'm confused...
When I run adb shell I can gain root access. However, it appears as though HTC Sense (or any other launcher) is not running as root..or at least the programs launched within Sense (i.e. astro file manager, wireless tether) are NOT running as root. I can only create dirs in /sdcard with Astro File Manager...Guess I gotta figure out how to wipe and restart.

Not to complicate your current line of thought, but I don't think normal file managers can create new files in system. only programs that request su will pop up in the su app. But the wireless tether should.
I am running basically stock with the tether and it works. But there is something to be said about trying to start over

Did you guys also loose 4g signal..And i hardly have any 3g bars to tether with...Before rooting after OTA everything worked perfect....Is 3g and 4g giving yall issues?

Related

WiFi Tether

I have tried stock and Damage roms, and still can't get wifi tether to work. Phone is fully rooted, with all the goods. I can use alternate wifi tether programs from the market, that do adhoc only, and they work. Is anyone else have this issue, or have any ideas?
Did you use wireless_tether_2_0_5-pre2.apk?
same problem here. am we the only ones? why?
anyway, go to the market, and download the one there, it works fine for me.
devin.slick said:
Did you use wireless_tether_2_0_5-pre2.apk?
Click to expand...
Click to collapse
I use that version with stock .6 ROM, works great.
Yeah, it works great and even appears as a regular access point. My problem has been getting intermittently disconnected and having to turn off/on tethering. Other than that, it works great.
same here ^^^ its been killing me cuz theres now warning of disconnect or anything but i love it!
Just make sure you guys get titanium backup and uninstall it. Then install it from the market place.
I had the same issue. I had to install the one from the market place, reboot, install the 2.0.5 version, reboot, start it and then it worked.
I haven't tried to replicate success this way as I don't want to risk breaking it again, but I've tried everyconceivable combination of getting it to work and this was the only way that did.
whats so different about 2.0.5???

How To tether the G2 internet (SUPER EASY)

So this morning, i was going through tons of tethering apps and i noticed alot of them do not work properly. Even when you rooted your G2. So i came across wireless tether and it was the only app that worked correctly.
this guide is NOOB FRIENDLY !!!!!! EVEN A CAVE MAN CAN DO IT ! LOL
Heres how you get it to work,
1) root your G2 . theres a one click root app called Visionary in the market. Download and install it. Before you run it, make sure USB DEBUGING IS ON !!!
2) Start the app up and press the button that say don't root on start up.
3) Once that button is pressed, the option will change to (Run on start up) and it will have a green light under it. Do not press the button again!!!! This will always root your phone every time the phone turns off and back on. It will run by itself.
4) Download/install Astro Manager
5)Download the attachment that is posted on this thread. Just below.
6) Once downloaded, Mount your phone to the computer and then copy and paste the file(which will be named app.apk) to your memory card. Now unmount your phone
7) Open up astro manager and install the file. Which should be named APP on the memory card.
8) Once installed start the app up and it will ask for super user permission. Just press allow and then you are tethering wirelessly !!!!
TETHER AWAY !!!!!!!!
download . sorry i forgot to post http://www.megaupload.com/?d=ZUWHM8O0
*************** NOW YOU ARE ALL DONE ***********************
Any questions, message me .
want to buy me a drink, make a donation.
flyboyzeya said:
So this morning, i was going through tons of tethering apps and i noticed alot of them do not work properly. Even when you rooted your G2. So i came across wireless tether and it was the only app that worked correctly.
this guide is NOOB FRIENDLY !!!!!! EVEN A CAVE MAN CAN DO IT ! LOL
Heres how you get it to work,
1) root your G2 . theres a one click root app called Visionary in the market. Download and install it. Before you run it, make sure USB DEBUGING IS ON !!!
2) Start the app up and press the button that say don't root on start up.
3) Once that button is pressed, the option will change to (Run on start up) and it will have a green light under it. Do not press the button again!!!! This will always root your phone every time the phone turns off and back on. It will run by itself.
4) Download/install Astro Manager
5)Download the attachment that is posted on this thread. Just below.
6) Once downloaded, Mount your phone to the computer and then copy and paste the file(which will be named app.apk) to your memory card. Now unmount your phone
7) Open up astro manager and install the file. Which should be named APP on the memory card.
8) Once installed start the app up and it will ask for super user permission. Just press allow and then you are tethering wirelessly !!!!
TETHER AWAY !!!!!!!!
*************** NOW YOU ARE ALL DONE ***********************
Any questions, message me .
want to buy me a drink, make a donation.
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=4G6QXU2PYC9WS
Click to expand...
Click to collapse
What apps did you have issues with?
Here is all I did
1. Downloaded and installed VISIONary from Market
2. Downloaded and installed Barnacle from Market
3. Launched Barnacle and hit start and allowed SU permission.
4. Was tethering with my iTouch in minutes.
In the end things can be odd on different phones of the same model so options are great.
barnacle didnt work for me. It wouldnt appear on my computer on psp or ipod. it wasnt working at all.
But this method worked for me so i advise people to give it a shot
flyboyzeya said:
5)Download the attachment that is posted on this thread. Just below.
Click to expand...
Click to collapse
I might just be retarded, but where is the link for the apk?
Markley02 said:
I might just be retarded, but where is the link for the apk?
Click to expand...
Click to collapse
I'm secondly retarded.
Where's the link?
xomikronx said:
I'm secondly retarded.
Where's the link?
Click to expand...
Click to collapse
sorry i for got to post. Its there now
Downloaded and Installed the App to my phone. It looks like it's working but I haven't tried to connect a device to the tethered-created network.
EDIT: The tether application work fine. I'm using it atm to type this message.
Its just wireless tether
Sent from my T-Mobile G2 using XDA App
To be exact.
Its wifitether PRE-4
After you get root, just go into google. Type- wifi tether. Click first google link. Download wifi tether app. Open app, click center to tether. Press menu to go into settings. Thats it. Personally, i dont think this guy deserves donations because if you look at other threads, they tell you how or what apps you can use to wifi tether. I know this because thats how i learned
Sent from my T-Mobile G2 using XDA App
Barnacle didn't work for me either..It showed up on my laptop but wasn't able to surf...Wireless tether works fine..Make sure you get this version below because there are certain versions of wireless tether that don't work on the g2
Sorry messed up on the attachment...Here it is
Wireless Tether 2.0.1 doesn't work for me when I try wirelessly. It broadcasts successfully but I can't authenticate. It does not appear as ad-hoc and is not secure as it should be.
question; am i the only one getting a missing kernel issue?
Where did you get this "magic" app apk from? Usually citing your sources common courtesy. Also I'm not going to download an app and give it root privileges without a link to any documentation.
hawaiian.monzta said:
After you get root, just go into google. Type- wifi tether. Click first google link. Download wifi tether app. Open app, click center to tether. Press menu to go into settings. Thats it. Personally, i dont think this guy deserves donations because if you look at other threads, they tell you how or what apps you can use to wifi tether. I know this because thats how i learned
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
I definitely have root using Visionary, and downloaded the app for the first post, and it did not work. I can connect to it w my computer, but internet does not work. Which one of these apks did you download? The G2 Vision is not listed when you follow these instructions.
jkoenig00 said:
I definitely have root using Visionary, and downloaded the app for the first post, and it did not work. I can connect to it w my computer, but internet does not work. Which one of these apks did you download? The G2 Vision is not listed when you follow these instructions.
Click to expand...
Click to collapse
I usually just download the first apk. But i forgot one step. Open up app, Go into settings and click "access control" to enable it. Do NOT put a WEP encryption password. LEAVE YOUR CONNECTION OPEN!!! Heres why. When you connect your laptop to the wifi, your phone will get a notification saying (mac address blah blah) it will be red most likely. Click menu-then access control. The mac address of your said laptop or device is what the notification popped up. So go to access control and find your devices specific mac address and make sure the box next to it iz checked and you must click apply at the bottom. You just gave your laptop or device internet. If say your neighbor connects to your wifi, dont worry. The ONLY way they can get internet off you iz if you go to their mac address of their device, click the box, and then apply it as well. If you dont apply it, they dont get internet. So YOU control who uses your internet, not a password. Another reason why you dont want to set up a wep encryption iz because if you do, you wont be able to use wifi. Dont know why. Just happens. So try it for urself.
Need more help? Let me know
Sent from my T-Mobile G2 using XDA App
And wifi tether app is an infrastructure connection
Sent from my T-Mobile G2 using XDA App
sweet it works now! none of the posts mention any of this stuff, so i was just using WEP encryption. I would have never thought of this stuff lol. Anyways thanks a lot!
Tethered
Worked like charm, Thx.
T-Mobile G2 Virtuous.

Need wifi tether app with infrastructure mode

Ok, so my new Kindle Fire cannot see ad-hoc networks. So, using Wireless Tether I get no signal on the Fire from the E4GT.
I'm reading that I need a tether app that supports infrastructure mode or to change the device profile in Wireless Tether to an LG Optimus. I don't see the option for this.
Anyone?
http://code.google.com/p/android-wifi-tether/
Go here and download the latest beta version of the WiFi Tether apk and install it. This is the version you need to be able to switch the profile of WiFi Tether to the LG Optimus.
webran61 said:
http://code.google.com/p/android-wifi-tether/
Go here and download the latest beta version of the WiFi Tether apk and install it. This is the version you need to be able to switch the profile of WiFi Tether to the LG Optimus.
Click to expand...
Click to collapse
Ok, done and installed, however I'm getting errors each time I start the tethering...
I managed to start it once without errors, but neither a black berry nor the Kindle could see it.
I uninstalled my old Wireless Tether app.
This may be a dumb question, but does the beta app need special permissions? Or does it need to be placed somewhere specifically on the sd card?
I don't think so.
I do believe you have to make sure that the SSID you create is all-lowercase and contains no special characters, and also that "Routing Fix" is enabled in the settings along with everything else.
I don't really know though, so I'm sorry I can't be more helpful.
You are rooted correct? Do you have a custom rom installed?
maw230 said:
Ok, so my new Kindle Fire cannot see ad-hoc networks. So, using Wireless Tether I get no signal on the Fire from the E4GT.
I'm reading that I need a tether app that supports infrastructure mode or to change the device profile in Wireless Tether to an LG Optimus. I don't see the option for this.
Anyone?
Click to expand...
Click to collapse
You may need the native Hotspot hack. If I use the Wifi Tether apk, my Nexus doesn't see it but the Hotspot hack works perfect
Sent from my Nexus S 4G using xda premium
Thanks for the tips everyone. I had to install busybox and use the Ad-hoc Switcher app - ZTO or something - and it was finally able to work!
So maw230,
What exactly did you do?
I attempted to do the same as your last post described, however ZT-180 Adhoc Switcher by HAL9000 (the program I believe you are referencing) is unable to locate the required files in their expected locations.
I already installed BusyBox (By Stericson) and had it install busybox 1.19.3 and my E4GT was rooted using ODIN.
I am going to continue searching, perhaps I can get the HotSpot Hack up and running and report back here. In the meantime, if you could verify what apps exactly allowed you to pull this off- myself and many others would be much obliged!
Thanks
I had no issues with the hotspot hack compared to countless headaches with the other tether apps.
Sent from my SPH-D710 using XDA App
br0ken_shad0w said:
I had no issues with the hotspot hack compared to countless headaches with the other tether apps.
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
Do you think you can assist me.
I've been trying to do the hotspot hack. I've rooted successfully using qbking77 video.
Next I downloaded the ek02 hotspot odexed version to root of my sd card. Using the stock recovery console, I choose to install from sd card. When I select the hotspot hack file, it just display the green android with a triangle and exclamation point and does nothing else. Then I thought maybe I have to unzip it first, but that wasn't it since it didn't see any files at all. Would like to remain stock as much as possible.
I have the latest firmware from sprint by the way if that makes any difference, ek02.
Relax427 said:
So maw230,
What exactly did you do?
I attempted to do the same as your last post described, however ZT-180 Adhoc Switcher by HAL9000 (the program I believe you are referencing) is unable to locate the required files in their expected locations.
I already installed BusyBox (By Stericson) and had it install busybox 1.19.3 and my E4GT was rooted using ODIN.
I am going to continue searching, perhaps I can get the HotSpot Hack up and running and report back here. In the meantime, if you could verify what apps exactly allowed you to pull this off- myself and many others would be much obliged!
Thanks
Click to expand...
Click to collapse
All you need to do is install a ROM that has the Hotspot hack. IMO PhantomHacker's Blazer ROM is one of the best out there and the hotspot hack comes pre-installed, so all you need to do is use the Sprint Hotspot app once the ROM is installed.
I spent way too much time trying tether apps and using the Adhoc switcher when all I need to do was open the Sprint Hotspot app!
Good luck.

I think I lost root. How do I check and fix?

I've had a few apps tell me that I'm not rooted and my wifi tether no longer works (laptop doesnt even see the network. Tried changing and using another tehtering app and it saw it but only gave me limited connection. No internet.) but when I put SU into terminal emulator it returns #.Can someone please tell me how to check to make sure my root is still fully entact and functioning.
Try opening the superuser app.
Thanks for the fast response man. I really appreciate it.
I did and it didnt do anything so I cleared the permissions for it aaaaaaand think i made it worse. in super user I scrolled down to the wifi tether app and clicked it and hit the trash icon withouth thinking it through. IS there a way to manually add allowed apps. I also noticed SU never prompts me to allow apps anymore. Really holding up my ingress progress. lol
2low2rl said:
Thanks for the fast response man. I really appreciate it.
I did and it didnt do anything so I cleared the permissions for it aaaaaaand think i made it worse. in super user I scrolled down to the wifi tether app and clicked it and hit the trash icon withouth thinking it through. IS there a way to manually add allowed apps. I also noticed SU never prompts me to allow apps anymore. Really holding up my ingress progress. lol
Click to expand...
Click to collapse
Just run any app that needs root and it will prompt you again. You cake also download root checker from play store.
Sent from my SGH-T999 using Tapatalk 2
Thank you too eles. I actually just did that and it told me I dont not have proper root access. But Terminal emulator does show # when prompted. Can either of you tell me how what may have caused this and how to fix it. I did just get the 4.1.1 update from T-mo so Im thinking maybe that.
Reflash superuser with your recovery.
Aerowinder said:
Reflash superuser with your recovery.
Click to expand...
Click to collapse
Yes do this or Odin the prerooted one. The update broke it.
Sent from my SGH-T999 using Tapatalk 2
Thanks again aero. I reflashed it and Root checker still says im not. I also tried to run fix permissions and it says an error too.I also tried to do a back up and it hangs on "done freeing up space". What would be your next step to diagnosing/fixing this. and Thanks again you guys I've been freaking out a little. lol
Just re-root.
Then reflash your favorite ROM.
How did you root in the first place?
Sent from my SGH-T999 using xda premium
Is it really that simple? Won't there be some issues because I have a somewhat partial root already? I honestly don't rememeber my original method. I did it back in september and havent messed with it since. I never even ran any roms I'm still bone stock. Is there a method you would suggest? or possibly a link to it?
Yes, it really is that simple.
If root still isn't working, follow instructions in my signature. The su zip is also going to wipe out any previous superuser/supersu that is present on your phone.
Alternatively, if you already have CWM on your phone, you can use this http://db.tt/okfh9vzU to update it without tripping your counter.
Thanks to your guys' help I was able to reroot using the tool kit. Now my issue is that I did this to fix my wifi tethering issue and its not. What app would you guys suggest for tethering? I dont have it on a part of myplan but I know theres ways around it. Wifi tether and barnacle didnt work (wasnt seen by laptop or other s3) and fox fi was identified, let me connect but said it was limited, then eventually went to fully connected but still wouldnt load pages or anything. If I can get one of you guys to help me solve this by suggesting an app or something I'll get out of your hair.
Do I need to load a custom rom to tether maybe? Thanks again guys.
2low2rl said:
Thanks to your guys' help I was able to reroot using the tool kit. Now my issue is that I did this to fix my wifi tethering issue and its not. What app would you guys suggest for tethering? I dont have it on a part of myplan but I know theres ways around it. Wifi tether and barnacle didnt work (wasnt seen by laptop or other s3) and fox fi was identified, let me connect but said it was limited, then eventually went to fully connected but still wouldnt load pages or anything. If I can get one of you guys to help me solve this by suggesting an app or something I'll get out of your hair.
Do I need to load a custom rom to tether maybe? Thanks again guys.
Click to expand...
Click to collapse
Just ddownload, and install WifiTether-TrevE_Mod_Latest.apk
it'll work if you make the changes here:
Profile :generic ics/jb wlan0
Enable "send netd max client cmd"

Tether Help

Hi guys I really need some help here. Last night I set out to simply find a way to tether wifi from my GS3 for free. From my understanding that required me to root + download tether app with root admin rights. Apparently it appears to be more in depth than that  unless I’m missing something simple. I’ll just start by giving you my specs and tell you what I’ve done so far. Sorry for the long post.
Sprint
Galaxy S3
SPH-L710
JellyBean 4.3
Hardware L710.14
Stock kernel and rom
Followed the steps in this link to root it. It pretty much walks me through using Odin to root the phone. Looks like it also installs SuperSU for superuser access. I like the fact that it’s not too invasive, which is great because I simply want wifi tethering and am not looking for a custom kernel or rom. http://honai-android.blogspot.com/20...-sph-l710.html
Supersu
When I start the phone it says “Unfortunately SuperSU has stopped”
Downloaded the apk, ran it, launched ok, asked me to disable knox and said yes, rebooted phone, got same msg that supersu stopped, runs fine after install apk but fails after every reboot. Maybe knox is screwing with it?
No supersu update on the play store
Regardless I installed root checker and says the device has root access…
I downloaded a bunch of tethering apps I thought had root access but none actually enabled tethering.
Foxfi
When I use CDMA only (used this for troubleshooting purposes) Launch Foxfi, activate wifi hotspot, “unable to connect to data network, turning off hotspot. Your plan may not have hotspot service”’
When I use LTE/CDMA the popup message is you are not subscribed to the Hotspot service. Do you want to see subscription options?”
When I cancel out of that popup it says FoxFI hotspot ready and has the wifi icon on the notification bar but can’t find the wifi network on devices
Also it never requests superuser
1 click wifi tethering free
Launch, click enable, the notification bar says hotspot connected but then I get the same error “unable to connect to data network, turning off hotspot. Your plan may not have hotspot service”, still can’t see the network on other devices
When I use LTE/CDMA the popup message is you are not subscribed to the Hotspot service. Do you want to see subscription options?”
Also it never requests superuser
Wifi Tether TrevE Mod v3.3
Launch, opens fine, asks for superuser access, click button to enable tethering, get an error in the app that says “tethering started with errors! Please check ‘show log’”
Clicking show log gives me an error of “Unable to open log file. File does not exist.”
It still shows a message “Tethering is currently running…” under the “ongoing apps” section but still can’t find wifi network on other devices
Jtether
Launch, “says turning Wifi AP on” requests superuser access, eventually gets to the same message that says “unable to connect to data network, turning off hotspot. Your plan may not have hotspot service”
When I use LTE/CDMA the popup message is you are not subscribed to the Hotspot service. Do you want to see subscription options?”
Oddly when I launch Jtether with FoxFI on I can see the FoxFI network for literally 1 second, but not long enough to connect. This only happens when I use CDMA only. When I use LTE/CDMA it never shows up at all.
.
I’ve uncovered a lot of issues but I don’t know where to start troubleshooting. Do I start with SuperSU errors or can they be omitted? Do I start with FoxFI error troubleshooting? Maybe start with finding out why TrevE’s tether mod has errors but log file can’t be found? Maybe the root method I used wasn’t ‘deep’ enough? If so what method should I use? I thought this would be way easier but hours and hours later, here I am with no wifi tethering. I hope you guys can help.
Thnx in advance!
Use the odexed mk3 file from here. (You will need a custom recovery to install. )
http://forum.xda-developers.com/showthread.php?t=2224083
Sent from my iPhone using Tapatalk
dcharleyultra said:
Use the odexed mk3 file from here. (You will need a custom recovery to install. )
http://forum.xda-developers.com/showthread.php?t=2224083
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Thanks for the quick reply! What exactly is this file? Is it a new kernel? Or does it simply edit the configurations relating to tethering? Also can I go back to 100% stock after flashing it?
Also will this prevent me from being able to update the OS via Samsung push updates?
evo20110 said:
Thanks for the quick reply! What exactly is this file? Is it a new kernel? Or does it simply edit the configurations relating to tethering? Also can I go back to 100% stock after flashing it?
Click to expand...
Click to collapse
It is not new firmware. It's just a modified services.jar file. Since it's a hack, you will not be 100% stock after installing it. (You can get back to it by restoring the stock files (.jar and .odex files).
Sent from my iPhone using Tapatalk
dcharleyultra said:
It is not new firmware. It's just a modified services.jar file. Since it's a hack, you will not be 100% stock after installing it. (You can get back to it by restoring the stock files (.jar and .odex files).
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Awesome. Ok I installed CWM and I'm about to download the MK3 Odex file. Shouldn't be too hard to figure out how to "flash" it within the app. Wish me luck!
evo20110 said:
Awesome. Ok I installed CWM and I'm about to download the MK3 Odex file. Shouldn't be too hard to figure out how to "flash" it within the app. Wish me luck!
Click to expand...
Click to collapse
How did it go?
Sent from my iPhone using Tapatalk
dcharleyultra said:
How did it go?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Worked like a CHARM! Thanks so much for the help! You have no idea

Categories

Resources