I found something out guys...
I'm on JG1 but with the JFF CSC which apparantly fixes the swype bug.
All was working fine, however when I was typing a long sms (which turns into an mms after 3 pages 0_0 never knew that), the phone recommended to me to change the "input mode" to "automatic.
So I went into messaging > settings, and changed "input mode" to "automatic. Suddenly the swype bug was back...
Changed "input mode" back to "gsm alphabet" and all was working again.
So I have a suspicion that the swype bug is caused by "automatic" input mode, which is probably the default mode for JG1 CSC. On the other hand I suspect that the automatic input mode for JFF CSC is "gsm alphabet".
If my suspicions are correct.. then you can fix JG1 swype bug without firmware flash, by changing the input mode to "gsm alphabet".
Anyone try?
Genious,
Thank you!
I just updated to JG1 yesterday to install the Modaco rom. Swype not working was really annoying me!!
Related
hi i just got an o2 stealth but i cant seem to write a message without using the virtual keypad. And when i go to Input in settings and change the Input method to something other than keyboard then when i exit, the settings change back to keyboard. Any ideas?
Just try this Once
anGu$ said:
hi i just got an o2 stealth but i cant seem to write a message without using the virtual keypad. And when i go to Input in settings and change the Input method to something other than keyboard then when i exit, the settings change back to keyboard. Any ideas?
Click to expand...
Click to collapse
Hey i don't know much.... but try restarting your PDA.... the first thing you do after all programs are loaded... goto input settings and choose.... the input method you want... then goto the options available for it... and confirm those settings and click ok.... then again exit input settings clicking ok.....
then while entering text in any application... select your input method again if it does not appear as a default.... then probably you won't have to do the above stuff again and again untill and unless you re-boot your device.....
There is a small program called Sip Change....it may fix the problem....
Hi!
My TP2 is a TMobile 6.1 default ROM.
I am trying to run some foreign SW on the thing, but I am getting an error due to the locale and whatnot. The instructions were:
Groundwork:
Install Program (done)
Install Font (done)
Everytime work:
Run usemynls.cab if Korean is not in Regional Settings (mine was not, so I ran it)
Change to Korean in Regional Settings (I did)
*** TP2 told me to reset device for setting to take effect
Reset device by power off tap and then power on
Locale is back to English (I kind of expected this part)
Is there any way to force TP2 to accept itself as having changed locale without resetting? I think that is the only way I can run this app! Thank you!
Hi all!
I'm new to DHD but NOT to android as I have a HD2 running android since July 2010!
However i made a fatal idiot error when i was so existed to the extent where i updated the software directly when getting it and now i'm stuck with it. I have:
-2.3.3 android
-2.42.415.1 build
-12.54.50.25U_26.09.04.11_M2 baseband.
- and of course a stock ROM unrooted and locked!
Ok so here's the minor issues i'm having:
1- Although i have disabled (unticked) all prediction and spell correction in keyboard settings, it's still giving me a red line under wrong words (or so it thinks) and gives me the ability to add it to custom words although i dont want that.
Any help on that?! (i know i can install another keyboard but the stock one is the perfect for me)
2- Weather animation (after unlock) plays 1 on 20 times with sound effects and the remaining 19 times without any sound!
Any help on that too?!
4- The magnification window that is created when u scroll on a keyword while typing is shifted upwards!!!
Example: if i write : asdaksdj asd midnight lkj asdakjd akj daklsj dalkjsd
asd asdl kjas dlkajsd lakjd laksjd daytime laskjd laskjd laskj dlakjfggjwpio
qweoiusdfkj dfknsdlfisdfop
and if slide on "daytime" i can see the word "midnight" magnified while i can see the top of the cursor moving on the word "daytime"!!!
However also 1 on 20 times it works normally!!!
Any help?!
3- Finally one irritating issue is that i cannot set a security lock screen for this phone!
In fact, i "can" set a "pattern" or a "PIN" or a "Password" without any problem, however it does only work once after unlock!!! After that it will be disabled automatically. When i go to settings i can see like if there's no security locks!!!
Any help on that please?! (PS whatever the duration of autolock (i mean immediately, after 3min, etc....) is set, it's still the same)
Thanks guys!
Anyone please?!
red dots are bug(or maybe htc didnt want to disable that) , also all htc gingerbread update have bugs, that's the reason i rooted my phone, because factory reset didnt help me.
i didnt have problem with weather.
try factory reset, and if that does not solve the problem, root is your friend.
before you done factory, remove battery for few seconds, and see if you still have problems.
I think you try doing 'Factory data reset'
Factory data reset will lose all data on your phone memory but not the data on SD card. So make sure you back up SMS, Contacts and calendar entries etc..
Then go to 'Settings > SD & phone storage > Factory data reset
then follow the instructions.
Hope this will help,
Good luck!
the question is
How in the hell you couldn't downgrade ...to get ROOT
Hi,
I'm facing serious problem with freeze and reboot frequently :crying:
My Gemini PDA is Japanese keyboard layout and 4G+WiFi type.
I tried to do following action for checking what root cause is.
- I removed microSD card and SIM card
- I rebooted by manual and connect to WiFi network.
But nothing was changed.
I also tried a soft reset from "backup and reset" -> "data reset" in Android OS settings but nothing was improved.
Does anyone have similar or same problem like me?
One more thing:
Planet Computer support suggested me full factory reset.
But I could not find how to do it. I tried it by pressing both ESC(power) button and side button simultaneously
but there is no available command like full reset.
Any suggestion or information is welcome!
Best regards
Akira
additional info.
I tried to find when freeze problem happens as following.
1) Input method conflict
1st time, I installed Google Japanese language input and activate both Google's and Gemini keyboard input. This may make conflicts and freeze problem was happened.
I disabled Gemini keyboard input and leave Google's input as active.
It looked reducing the error rate but not fixed yet.
2) Evernote app
When evernote app syncs with cloud 1st time, freeze problem happened. This happens only once.
3) Playing movie file from google photo app
Some times happens.
4) initial setting up
So I did reset of my data and apps on Android OS.
But reboot problem might be getting worse.
Inputting my google account like "[email protected]" but frozen and reboot happened before inputting "@" character.
I tried to find root cause by removing SIM card but the problem happened again.
I asked my Japanese Gemini users if they are facing similar problem but no one faced the problem.
reflashing image but nothing changed
Hi,
I got suggestion from Planet Computer's support team that flashing image might fix the problem.
I tried it but nothing was improved.
I already sent the result to team. I hope they will pick my pda up then replace it.
---
By the way, it does not need install flash tool driver if you use Windows10.
Just launching Flash tool works without installation of the driver.
I have been facing issue with Autofill with Google in Android P beta 2. It stops working and clicking on Passwords under Settings -> System -> Language & input - > Advanced - > Select Gear next to Autofill service - > Clicking Passwords gives error "Something went wrong". Anybody faced the same issue? I tried factory reset and all kernels out there...and happens on all of them and stock as well... I have attached logs...I am not sure how to decode the logs..so if someone can look at logs for issue, would be grateful....
Have you attempted to upgrade to DP3 & see if the issue persists? I just walked through your steps & was able to change my autofill service w/o issues.
EvilDobe said:
Have you attempted to upgrade to DP3 & see if the issue persists? I just walked through your steps & was able to change my autofill service w/o issues.
Click to expand...
Click to collapse
I am on DP3 only, clean install..it's kind of intermittent..works sometimes and sometimes not
ram4ufriends said:
I am on DP3 only, clean install..it's kind of intermittent..works sometimes and sometimes not
Click to expand...
Click to collapse
May I ask why you keep going in there to change it? I went in there the one time to set it to LastPass & never had a reason to go back until now.
EvilDobe said:
May I ask why you keep going in there to change it? I went in there the one time to set it to LastPass & never had a reason to go back until now.
Click to expand...
Click to collapse
I am not changing it...I using Google Autofill instead of LastPass...sometimes forms doesn't give Autofill option, so I go to Passwords in Autofill options and it gives error
I am getting the same error. I only went in to auto fill settings because I noticed that auto fill in apps stopped working after I installed DP3. Getting the same "something went wrong" message when I attempt to select Passwords. I am able to select every other option, such as Addresses and Credit Cards, without issue.