Hi all, for all the people like me who do not have the patience or knowledge do adventure themselves in the mitty thread.
This program already exists for X1, HD2, TP2 (for what I know) and I have tested it and it works.
After some search on this forum I have talked to agent_47, who was kind enough to make a task29 program for our HTC Diamonds (GSM version).
Agent_47 or me do not take any responsibility for ay damage done to your device. Use it at your own risk, and only after you have HSPL already installed on your device.
Do not know what a HSPL is, check here:
http://forum.xda-developers.com/showthread.php?t=415191
agent_47 said:
it will flash radio 1.09.25.23
replace the radio if u want to use other version
Click to expand...
Click to collapse
agent_47 said:
now we can mtty our "HTC Diamond" without having the need of MTTY and its drivers
INSTRUCTIONS:
- download and unzip
- run then ROMUpdateUtility.exe and wait for it to finish.....
- device will reboot but will neva go past the bootscreen coz there is no OS to boot
- take our batti and then flash a rom using mSD card or by taking device into bootloader and using customRUU to load ur favorite ROM
DOWNLOAD:
http://rs604.rapidshare.com/files/407049148/task29-diamond.7z
WHATS TASK29\MTTY
when u flash a rom, you are copying files onto the internal memory (like duh!) but if u repeatadly flash different roms, sometimes files from older version stays behind as when u flash a rom, you just copy and sometimes overwrite files without deleting the older ones. hence at times these older files may create bugs\instability. hardrest donot always fix it.so we use MTTY
but the thing is, mtty is and can be hard to use for new users. ... for me,, i was having the worst time installin the drivers needed to run mtty on win7 x64. so u i made this tool for me and for all
CREDIT:
all credit goes to doloop for coming up with the idea
Click to expand...
Click to collapse
and I would add to agent_47, as he adapted this tool for the HTC Diamond
Did anyone tried this?
What's the verdict?
mmm. interesting.
Thanks for the share and all your hard work but this is actually harder than mitty for me and i am a windows 7 user also
wapvirus said:
Thanks for the share and all your hard work but this is actually harder than mitty for me and i am a windows 7 user also
Click to expand...
Click to collapse
I do not understand how this is possible, I am using Vista and this is as easy as flashing a ROM with a computer. You just connect the device via USB to the Diamond, let active sync finish. Then you just need to run "ROMUpdateUtility.exe" and follow the instructions.
I have tested this, and I can confirm this is working for the European HTC Diamond (bought in Portugal).
This was not made by me, but I do think that more people will benefit with this program. Hopefully people will overcome the initial resistance to change.
Great idea!
I used to MTTY through VMWare Windows XP x86 within my host Windows 7 x64. It was a pain in the ass to get though but it always worked for me. This is a great time saver!
Regards to both of you Johev and agent_47!
Willing to test on my next flash.
Best regards,
Cina.
INSTRUCTIONS:
- take our batti and then flash a rom using mSD cardor by taking device into bootloader and using customRUU to load ur favorite ROM
Click to expand...
Click to collapse
What do you mean? take out battery?
Gonna try this with my next flash
Yeah, the sentence is a bit odd to me to
i asume it means take out battery but still..
i'm not gonna try it until i know it for sure!
--edit--
i couldn't help it and used it anyway..
i assumed "take our batti" means take out battery cuz it worked for me!
my diamond was clean (i guess) and i'm now enjoying a new rom!
Thanx guys!!
I would never post something that I did not test first.
I am glad that you liked it, and I really think it is much simpler then the mitty thread.
Good luck flashing.
rapidshare
first would like to give thanks for sharing this one but some people cannot use rapidshare links and unluckily I am those few
can you give alternative link like mediafire ????
character said:
first would like to give thanks for sharing this one but some people cannot use rapidshare links and unluckily I am those few
can you give alternative link like mediafire ????
Click to expand...
Click to collapse
http://www.mediafire.com/?jabdu2n968xa9uk here you are
I LOVE THIS TOOL
this isn't good for my ORD.. i'm flashing the hell out of my diamond now!
Getting a HD2 in about a month.. can't wait for it ;D
I tried it, but I only get the start screen with "Touch diamond", no bootloader.
But I´ve installed HARDSPL Olinex, because I already flashed other ROM´s.
How can I solve this problem?
What about battery? When I have to get it out, when I can put it in again...?
fibula
to get into bootloader you have to reset your device while holding the volume down button!
then you will get the tri-color screen,
connect your diamond to your pc and flash a rom with a RUU!
fibula said:
I tried it, but I only get the start screen with "Touch diamond", no bootloader.
But I´ve installed HARDSPL Olinex, because I already flashed other ROM´s.
How can I solve this problem?
What about battery? When I have to get it out, when I can put it in again...?
fibula
Click to expand...
Click to collapse
To get into bootloader with my diamond:
1) Turn Diamond off, take out battery for 5 seconds.
2) Put battery back inside, and press and hold the centre button (circle) and turn ON the device (hold both buttons) until you see a 3 colour screen
If step 2 does not work, try pressing holding volume down while turning the device on (hold the ON button too). Remember to take out the battery before you do this.
Hope this helps.
Hi!
Does this work by simply copying any ROM's nbh file (instead of radio*.nbg) to folder and executing ROMUpdateUtility.exe? Will it MTTY before flashing the ROM?
Currently I'm trying this method out. It is around at 50% of flashing progress.
I'll report back.
Cina.
thanks a ton dude.... magnificent work...
Now if there were only a way to do it directly from Internal Storage, without RUU...
It does not work the way I described. It hangs on HTC Diamond black boot screen and no red lines appears in lower right corner (no OS recognized).
So you have to flash 2 times. Radio flash is shorted for the first attempt and on the second turn you flash your ROM with CustomRUU.
There is a similiar tool like this with the method working with other devices I described above. FlashaholicRUU. Someone give it a try for Diamond. Next week I'll do it and report back.
Cheers,
Cina.
cina said:
It does not work the way I described. It hangs on HTC Diamond black boot screen and no red lines appears in lower right corner (no OS recognized).
So you have to flash 2 times. Radio flash is shorted for the first attempt and on the second turn you flash your ROM with CustomRUU.
There is a similiar tool like this with the method working with other devices I described above. FlashaholicRUU. Someone give it a try for Diamond. Next week I'll do it and report back.
Cheers,
Cina.
Click to expand...
Click to collapse
I remember to see that post on xda developers front page short time ago, but I was not sure if it would work for HTC Diamond.
A universal task29 that would format and flash the device in one single process.
Ironically it was developed a few weeks after I have found an alternative way to mitty that I posted here.
So far I did not hear that it was compatible with Diamond, so I will not risk it.
It's nice to have all these options, because when I searched for something like this a few months ago, I could only find the mitty threat that has more than 80 posts.
For me it was strange as newer devices with very similar hardware and software already had something like this, but Diamond users had to use mitty.
Well I am glad that you like it, and hopefully I helped someone that was not able or willing to do it manually.
Related
Hi Experts,
Would like to check whether anyone out there have ever encounter such problem?
I receive a rude shock this morning when I power on my 1 week old HTC HD which reads below:
"This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers.
To obtain a newer release or further information, please revisit the web site that you used to obtain your current beta release."
I've flashed it with Dutty's Rom v1.8 and many other software which I use to have on my previous PDA. I son't think its coming from the ROM but maybe the software i installed. I remember the last few ones was Resco Explorer, Resco Pro viewer, FTP CLient...etc.
I tried many ways but just cannot seem to get rid of this screen as it appears right after any reset. So I decided to hard reset the phone but after going thru the procedure of holding the Vol up/down and power button, it just reboot like after a soft reset...and YES, it went back to the same screen!
Another thing, I couldn't get the phone to sync with my PC too.
What when wrong and what other method can I try? Any kind soul's advice will be greatly appreciated.
Cheers and thanks in advance.
put your phone on bootloader mode(tricolour screen),then connect your usb cable,on your tricolour screen it should show you USB,when you see it on the screen(on your phone)then you can flashing rom.
Hope this help
chg1282002 said:
put your phone on bootloader mode(tricolour screen),then connect your usb cable,on your tricolour screen it should show you USB,when you see it on the screen(on your phone)then you can flashing rom.
Hope this help
Click to expand...
Click to collapse
Thanks for the advice, you are right. Its the Time Bomb for Dutty's ROM v1.8.
Just manage to get the new ROM and flash it. Have to re-install the bunch of softwares i did earlier as i didn't read carefully that there's a time bomb.
Thanks again for the advice.
Cheers
yes it's a problem with the OS version used unknown by the cooker. It has been corrected. It is mentioned the Dutty 1.8 thread. Since Dutty 1.9 is out seems good time for an upgrade.
you have to put the CAB file on your memory card,when you flashing the new rom,you have to install all software back your phone
Can you be a bit more specific
Hi
Can you please do a little step by step thing. I am having this problem. What do i do once i am in tricolour screen after USB is displayed at bottom of screen.
Thanks in advance
Hello everyone, I am really new to this forum having received the Dash 2 days ago. Looking to get it up to speed I flashed the 6.5 Energy Rom according to instructions. I think that was a very bad move, because now the cellphone is stuck on the Loading Energy Rom screen. I have searched the forum for answer and have already tried the following:
1- Entering bootloader and flashing original ROM. No luck because EVERY rom I have gotten, be it from here and T-Mobile, it says invalid vendor ID.
2-Tried to perform a hard reset. Did not work.
3-Flash the original ROM through the memory card. No avail.
The phone cannot connect to active sync, so I can't install any cooked ROMS. I think the solution is installing the original ROM by the bootloader, but I cant seem to find a compatible one. My cell information is the following:
Bootloader screen info: ONBL 1.22.0000 SPL 1.22.0000 IU
EXCA 100 S/N SZ713FE05873.
Is there any way with that information someone can tell me which ROM to use? Or any other tip/hint/suggestion? Any help will be greatly appreciated!
I have the same Bootloader screen info: ONBL 1.22.0000 SPL 1.22.0000 IU value and i was able to restore my phone to working status with the following ROM
http://www.megaupload.com/?d=IJIVTIMF
Hope this help
10507
Thank you very much 10507! I'll download it now and see if it works.
Thanks for the file but it appears that it is for the SDA. It dit not work
luisro said:
Thanks for the file but it appears that it is for the SDA. It dit not work
Click to expand...
Click to collapse
That's odd, I was able to restore my Excalibur/Dash after flashing the corrupted EnergyRom.
Hope you will find a way to resolve your problem.
10507
But how did you do it? Flashing it through USB or through the memory card? The weird thing is that when I run the EXE the cellphone that appears in the picture of the program is an SDA. But well I will try it again and thank you for the help!
I used bootloader method and connected my phone through USB for flashing. Remember to remove your memory card when flashing.
well, I've been in your situation for almost 3 days now, and still no solution for it, maybe it's time to put it in the box and purchase a new one , all thanks to the broken EnergyROM ...
Ok guys. Don't give up. Believe it or not, a Dash is NOT easy to brick like some other devices. the steps are fairly clear but let me refresh:
- Go into bootloader by holding the camera button and powering on the phone
- Connect the USB cable, you will hear the ba-bing USB connect sound on your PC (if u don't thats why you're having issues flashing)
- Download and unpack a "factory sealed" signed ROM. I use this one: http://rapidshare.com/files/7886560...S_1.33.422.1_4.1.13.51_03.07.90_Ship.exe.html
- With USB connected and the phone in the multicolor bootloader, run RomUpdateUtility.exe, check the boxes, it next, bla bla bla.
- It will look for your device for 20 seconds. then hit "update" and next.
- It should then start flashing the Excalibur Brightpoint Factory ROM back onto your phone
- If you can't get this far or it fails, try a different PC or Flash from the SDcard
** NOTE: If flashing from USB, REMOVE the SD CARD! This is the biggest mistake of most people trying to flash from USB.
Good luck.
ookba said:
Ok guys. Don't give up. Believe it or not, a Dash is NOT easy to brick like some other devices. the steps are fairly clear but let me refresh:
- Go into bootloader by holding the camera button and powering on the phone
- Connect the USB cable, you will hear the ba-bing USB connect sound on your PC (if u don't thats why you're having issues flashing)
- Download and unpack a "factory sealed" signed ROM. I use this one: http://rapidshare.com/files/7886560...S_1.33.422.1_4.1.13.51_03.07.90_Ship.exe.html
- With USB connected and the phone in the multicolor bootloader, run RomUpdateUtility.exe, check the boxes, it next, bla bla bla.
- It will look for your device for 20 seconds. then hit "update" and next.
- It should then start flashing the Excalibur Brightpoint Factory ROM back onto your phone
- If you can't get this far or it fails, try a different PC or Flash from the SDcard
** NOTE: If flashing from USB, REMOVE the SD CARD! This is the biggest mistake of most people trying to flash from USB.
Good luck.
Click to expand...
Click to collapse
Thanks ookba for cheering us up. I'm having the same problem like many, many people in this forum hopeless seeing our dash not responding to every solution proposed in this forum and the only thing that we have right now is keep trying to flash and see if it works. I will try again in different PC and see what happens. I'll let all of you know if I finally resurrect my s621.
Thanks everyone for all the help! It's hard to find people that are so helpful on internet forums. I'm still in the same situation as gmaniac and alexalexoe but hopefully we can find something that will fix our problems
luisro said:
Thanks everyone for all the help! It's hard to find people that are so helpful on internet forums. I'm still in the same situation as gmaniac and alexalexoe but hopefully we can find something that will fix our problems
Click to expand...
Click to collapse
This problem is ridiculously weird to why some members are able to restore their phone to original factory condition, and others are not able. Therefore, I have search from trustworthy sites and from friends for difference made ROM. Hopefully, one of these ROMs with help out anyone...........
1.33.422.1 (Worldwide English, WM6)
http://rapidshare.com/files/7886560...S_1.33.422.1_4.1.13.51_03.07.90_Ship.exe.html
1.27.405.1 (Worldwide English, WM6)
http://rapidshare.com/files/100235639/HTC_S620_WWE_1.27.405.1.exe
1.22.531.6 (T-Mobile USA, WM6)
http://www.mediafire.com/download.php?z4vjgzxisrz
1.22.531.4 (T-Mobile USA, WM6)
http://www.mediafire.com/download.php?yygkw1d5xmc
1.11.531.1 (T-Mobile USA, WM5)
http://rapidshare.com/files/104641948/T-Mobile_DASH_WM5_V_1.11.531.1.exe.html
Excalibur_BRIGHTSTAR_PTB_1.30.514.2_4.1.13.47_ 02.98.90_Ship
http://www.mediafire.com/?9gbwdzd2omg
Thanks 105507 but no success at all, I even found 2 more factory roms in the web and also they don't work. I own an unbranded international version s621 manufactured by Brightstar corporation (I tried to flash Brightstar's stock rom but it didn't work) and I noticed this because in the warranty docs it says brigthstar corporation and originally the phone came with WM5.
not that this will help. but this is one of the reasons why people should be really installing the hardspl so if you have a bad flash, you dont have to install a stock rom. any rom whether be it cooked or not will work. but this hardspl must be done prior to installing ANY rom. the hard spl is done by jockyw2001. send him a pm to see if theres anyway to get that on the phone, even in its current state.
edit: here's the link to the hardspl: http://forum.xda-developers.com/showthread.php?t=329605
luisro said:
Hello everyone, I am really new to this forum having received the Dash 2 days ago. Looking to get it up to speed I flashed the 6.5 Energy Rom according to instructions. I think that was a very bad move, because now the cellphone is stuck on the Loading Energy Rom screen. I have searched the forum for answer and have already tried the following:
1- Entering bootloader and flashing original ROM. No luck because EVERY rom I have gotten, be it from here and T-Mobile, it says invalid vendor ID.
2-Tried to perform a hard reset. Did not work.
3-Flash the original ROM through the memory card. No avail.
The phone cannot connect to active sync, so I can't install any cooked ROMS. I think the solution is installing the original ROM by the bootloader, but I cant seem to find a compatible one. My cell information is the following:
Bootloader screen info: ONBL 1.22.0000 SPL 1.22.0000 IU
EXCA 100 S/N SZ713FE05873.
Is there any way with that information someone can tell me which ROM to use? Or any other tip/hint/suggestion? Any help will be greatly appreciated!
Click to expand...
Click to collapse
My phone is the same your phone but ONBL 1.33.0000 and SPL 1.33.0000
I'm trying to find the original rom of this line but not found. Please help me!
Have you done a reset? My friend fixed his by trying reset a few times. He reset it, walked away...., it took long time to see whether it booted over; if not, do it again...
By the way, he leave the sim card in; and, you need to remove your micro sd card.
On an official site it is possible download ROM for your phone. It is flashing from bootloder mode. It some times helped me, while I have not flashed hard SPL.
luisro said:
Thanks everyone for all the help! It's hard to find people that are so helpful on internet forums. I'm still in the same situation as gmaniac and alexalexoe but hopefully we can find something that will fix our problems
Click to expand...
Click to collapse
Hi my friend, I wish you lucky!!!
by the way, where country you're from, I have some Shipped Roms here for brazilian Excalibur (S621), maybe it could help, if the answer is yes, let me know to made this one come to you
http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard
Furious Girlfriend (oh My beloved Helloween died with my ROM's)
Boy oh Boy...
My ROM's are now in heaven
Girlfriend deleted they (I'm so sorry...)
But, pay attention in this thread
http://forum.xda-developers.com/showthread.php?t=381726
In there have a sort of shipped ROM's and maybe coud help you
Good luck my friends
A friend from XDA have some Shipped Rom's and will upload it for you, shortly he'll post something here
Hey there,
After lots of problems with my P3300 (see this thread), I've decided to flash it to see if that helps. I'm not too bothered about getting the GSM working again as I have another phone, but I'd like to be able to run all apps again.
So... I'd like some advice please.
What would be the best ROM for me to use if I just want to use the phone as a GPS device, portable wifi web browser and notepad?
Basically something pretty stripped down with as good battery life as possible.
Is there any advantage with going for WM6 over WM5?
Bear in mind I've never done this before and am currently reading up on all of it.
From what I've read so far I'll have to do the CID unlock first (currently have WM5 in french installed and would like an english ROM)? I think it may be unlocked already but am not sure. Is there a way to check? Do I risk anything if I run USPL even though the phone is already unlocked?
Thanks in advance for any advice!
You can check if your phone is CID unlocked if the SPL number which comes up while booting during the big white HTC screen says 1.11.0000. If it says anything other than that then it's not unlocked.
Best stripped rom for me is Sheen's clean base version 3. Check it out, it's on the first page of the thread.
alternatively, if u want fast and stripped, go for yues extraclean (see my signature)
greetz
ferfecir Clean
This is the best clean rom which is a modified version of Yues clean with 30mb free ram.
http://forum.xda-developers.com/showthread.php?t=531972&highlight=ferfecir
mta33 said:
This is the best clean rom which is a modified version of Yues clean with 30mb free ram.
http://forum.xda-developers.com/showthread.php?t=531972&highlight=ferfecir
Click to expand...
Click to collapse
Pagepool 4 MB
RAM 32 MB
ROM 69 MB
Thanks for the replies. My SPL says 1.12.0000 so I guess I need to do the CID unlock.
Ferfecir Build 20931 looks like the most promising from those.
Can anyone please point me to a good tutorial for flashing the ROM via activesync? I'd rather not have to format the memory card if I can avoid it and my soft reset button is broken. (I have serached but had no luck)
Thanks!
download uspl from here http://forum.xda-developers.com/showthread.php?t=311403
and any rom you want...
unpack the uspl
plug the cable in the device and establish a usb connection
run the "start_uspl.exe" be patient...after being prompted to click some "next buttons" follow the procedure...and i mean it...follow the procedure...that with 50% battery,no programs running on the pc,no unplugging the cable and so on...
and you will have the uspl flashed
go to boot loader...The bootloader is invoked by pressing down the Power and Voicedialer buttons simultaneously, and using the stylus at the same time to press the RESET button at the left side. Continue pressing the two buttons for a few seconds after pressing and releasing the reset button until the bootloader screen appears.
if uspl says 1.11.000 then you are good to go
now you can flash any rom (cooked for artemis) and any artemis radio (i recommend you the 3.34.90.) onto your artemis
simply download,extract,run the rom update utility (RUU) ,follow the procedure and watch the show...
if you ever get an error during flash or anywhere else in the rom update utility...refer to this page and troubleshoot your troubles http://wiki.xda-developers.com/index.php?pagename=RUU_Errors
if you get an error saying invalid file size or something like that (you will get it if you try eg this rom..http://forum.xda-developers.com/showthread.php?t=465291)
go to this thread http://forum.xda-developers.com/showthread.php?t=521406 download the file and flash it if it is an ordinary rom...just run the RUU
afterwards just check it in the bootloader if it says 1.11.cmon it is ok....and you will be able to flash virtually any rom cooked for artemis onto yours
i must be damn crazy to post this thing...because it is all there in the wiki and the forum stickies,believe it or not
Thank you very much for the detailed instructions.
Just two more questions!
My reset button is broken. Can I just turn the phone off and back on to check if I have 1.11.0000 instead of using the bootloader?
And the RUU is this one? http://code.google.com/p/htc-flasher/downloads/list (only file I have for the new Ferfecir ROM is a .nbh, is that all I need?)
Thanks again.
this is a very open-ended question.
Everyone on here will have their own favourite rom....if there was 1 definate fits-all "best" rom ...everyone would be using it..but there isnt and we are all using the rom that suits us best
some people want their phone to be more like an iPod and so the multimedia aspect is a priority along with decent graphics and animated menus
some people want the PDA functionality most so they want a really stripped-down fast rom that is reliable and handles email well
everyone wants to use it their own way....thats why this site exists.
The guys who make these ROMS are the guys who say "this is good, but i want it to be more like THIS."
Follow farukb's (excellent) instructions....unlock your device properly....if you get any problems, search for the answer before asking for help....chances are hundreds of people will have had the same problem and hundreds of people will have already given the answer...and then ....just look around the site. See which roms are available that fit YOUR needs, and flash it....if you dont like it, try another.
I'm trying 6.5 roms at the moment and love it....i've flashed it probably once a week with a new ROM each time a new version is released and have seen the OS evolve....right now i'd say PDhee's Mega 6.5 M2D rom is the best of the bunch providing you're not planning on installing LOTS of exra programs.
that's the beauty of these things, if you dont like the ROM, just try another. Sometimes the ROM won't work quite right (especially if flashing ROMs between different cooks) so just try flashing it again to make sure it resets everythin correctly. If it's still not right, try a different ROM.
farukb said:
i must be damn crazy to post this thing...because it is all there in the wiki and the forum stickies,believe it or not
Click to expand...
Click to collapse
yeah, unfortunately (and it seems to have increased over the last year or so) nost people on here are noobs who can't be bothered to read through some threads or use the search and we just get the same questions asked constantly.
I dont minds helping people....providing they've looked for the answer themselves first.
every time a new rom is released there will be people asking what error 260 or 270 means?, do they need to USPL? etc etc
it's easier to ask someone else to take time out of their day to aswer your question than just type "error 260" into the search box and find out for yourself. They dont consider that people are having to answer these questions 10 times a week, in their own time, for no thanks, just to have the same question asked the next day. Purely becuase they couldn't be bothered to see if anyone else has asked that question before.
sorry...rant over....i love you all
seebasso said:
Thank you very much for the detailed instructions.
Just two more questions!
My reset button is broken. Can I just turn the phone off and back on to check if I have 1.11.0000 instead of using the bootloader?
And the RUU is this one? http://code.google.com/p/htc-flasher/downloads/list (only file I have for the new Ferfecir ROM is a .nbh, is that all I need?)
Thanks again.
Click to expand...
Click to collapse
no
you need to use the reset button (stick the stylus in the reset hole) .
Reset is like turning your computer off and on again
Power button is like turning the monitor off....it doesnt stop programs running and it doesnt properly reboot the device.
Your only alternative is taking the batter out i think (just like pulling the plug out will also reboot your computer).
If you havent already run USPL, then you probably WILL need to do it.
i dont know the specific ROM you're talking about, but just an NBH file will NOT work. You need the EXE file to run it.
Just download any suitable ROM off this site and it will have the whole package....if you're downloading from another site you'll have to ak that other site for help
my reset button doesn't work. i took the phone apart to change the touchscreen and must have misaligned something when putting it back together. sticking the stylus in the hole doesn't do anything anymore. will take the battery out instead, thanks.
regarding the rom, it is one i downloaded from here: http://forum.xda-developers.com/showthread.php?t=531972&highlight=ferfecir
the rar file downloaded from 4share (http://www.4shared.com/file/112067347/72728603/ARTEIMG-Ferfecir_-_20931_en_gncel_hali.html) only contains the nbh, no exe.
and for the record, i've spent all afternoon/evening researching this, searching this forum and the wiki etc! i appreciate it's annoying answering the same noob questions over and over again but i thought my thread was specific enough to warrant it and am grateful for all the replies.
seebasso said:
regarding the rom, it is one i downloaded from here: http://forum.xda-developers.com/showthread.php?t=531972&highlight=ferfecir
the rar file downloaded from 4share (http://www.4shared.com/file/112067347/72728603/ARTEIMG-Ferfecir_-_20931_en_gncel_hali.html) only contains the nbh, no exe.
and for the record, i've spent all afternoon/evening researching this, searching this forum .....
Click to expand...
Click to collapse
...yeah, and if you read ferfercirs description fully, you will come past "sd-card-flashing" which is the way to flash the *.nbh -part of your rom in a way without needing an activesync connecton
greetz
i did read that bit
but as mentioned a couple of times in this thread already, my reset button is not operational so i cannot use bootloader (afaik). so i assumed there was another way.
but i guess i'll find a rom that comes an an exe and save myself some trouble
no need to keep searching,
u can simple take the provided *.nbh file that came without an exe, rename it to ruu_signed.nbh, exchange the existing RUU from a complete installer-routine and off u go, provided u have used uspl first
greetz
ok thank you once again, i'll try it tonight.
one final question! do i need to have a sim card inserted while running USPL or does it not matter?
It is recommended to remove both your SIM card and your MicroSD card during any type of flashing, whether it be USPL or ROM. Even my reset button is not working anymore, my phone got dropped in water and I had to give it for repairs. After motherboard change they assembled it slightly wrong I guess, and it doesn't work. But I can still get into bootloader by just pressing the Voice record and power buttons together for 10 seconds. Try that.
Secondly, I hate to be plugging myself here, but I have just cooked a clean 6.1 ROM myself, with the latest build of 6.1 that is 21054. you might want to check that out, it comes with the full package and not just the nbh
here it is - (http://forum.xda-developers.com/showthread.php?t=551728)
Again, sorry, but Im giving you an option thats all
thormdac said:
no need to keep searching,
u can simple take the provided *.nbh file that came without an exe, rename it to ruu_signed.nbh, exchange the existing RUU from a complete installer-routine and off u go, provided u have used uspl first
greetz
Click to expand...
Click to collapse
ok i need help again sorry! i tried this but i got an error after 5% saying the .nbh was an invalid size
i used the ROMUpdateUtility.exe from Arte_WM65_23009_M2D_Mega_beta1 ROM (i removed Arte_WM65_23009_Mega_b1.nbh from the folder and replaced it with Ferfecir's .nbh which I had renamed to ruu_signed.nbh)
What did I do wrong?
I ended up flashing with Arte_WM65_23009_Mega_b1.nbh and it worked great but that ROM is too much for me and I want Ferfecir's simpler one.
Thanks
You need to flash the newer USPL which allows nbh files of a smaller size to be flashed.
thanks! it worked. everything working perfectly and my gsm works again too. woohoo.
Please save sarcasm when responding. I have been reading and would onlt ask for help a last option.
My phone - HTC Pro 2 (I bought it from a authorized t-mobile store)
Need help with - ugrading it to 6.5 or any cooked version that will work
History - my phone is already unlocked as I had unlock kings do it. I tested it and I can put any sim it and it works fine.
Problem - every time I try and install a new rom on it I get one the follwing errors or issues: My usb connection stop when the install starts and the process times out, or I get a host of errors messeges from invild device to wrong version.
I need very simple instructions on what I need to do upgrade my os and then later migrate to some of the really roms I have seen on this site.
Please help.
Did you hardSPL? If not go here: HardSPL
Nothing
I DL'ed the fle and followed directions (auto option). Nothing happened.
bigdaddy67 said:
I DL'ed the fle and followed directions (auto option). Nothing happened.
Click to expand...
Click to collapse
When you read those 11 steps in the HSPL thread, where is it, where you say: nothing happends?
As it stands, you will only be able to install an official T-Mobile ROM if it is a T-Mobile-branded phone.
So installing HardSPL will let you flash whatever ROM you want, any of the official ones (including, say, HTC official 6.5), or one of the fine cooked ones from this forum.
If you are having trouble with HardSPL, you really need to post on that in the HardSPL sticky.
no matter what I do, the connection always times out. It seems my phone will not allow anything rom software to be installed. Where can I find enableapnew.cab? The rom software told me i needed that.
@bigdaddy67
This sounds like a USB issue, try this:
1. Power off your TP2
2. Press and HOLD the volume down button, press and HOLD power button until you see the multi-coloured screen (bootloader mode)
3. Connect your TP2 to your computer via USB
4. You should now see the letters USB at the bottom of the TP2 screen
5. If you DO, run hardSPL
If you DON'T, try a different USB cable and/or port on your computer.
If none of the above helps, take a screen shot of your bootloader screen and post it.
How to get a screenshot:
1. Go to http://www.mymobiler.com and download/install the software.
2. Open it and take a screen shot
3. Post it here.
We are here to help, but need some additional details!!!
Russ
bigdaddy67 said:
no matter what I do, the connection always times out. It seems my phone will not allow anything rom software to be installed. Where can I find enableapnew.cab? The rom software told me i needed that.
Click to expand...
Click to collapse
normally I would tell you to go search but you seem to be in a pickle so here...
Russ
bigdaddy67 said:
Please save sarcasm when responding. I have been reading and would onlt ask for help a last option.
My phone - HTC Pro 2 (I bought it from a authorized t-mobile store)
Need help with - ugrading it to 6.5 or any cooked version that will work
History - my phone is already unlocked as I had unlock kings do it. I tested it and I can put any sim it and it works fine.
Problem - every time I try and install a new rom on it I get one the follwing errors or issues: My usb connection stop when the install starts and the process times out, or I get a host of errors messeges from invild device to wrong version.
I need very simple instructions on what I need to do upgrade my os and then later migrate to some of the really roms I have seen on this site.
Please help.
Click to expand...
Click to collapse
Welcome to forums
Hope this guide help you:
http://forum.xda-developers.com/showthread.php?t=550540
And don´t forget to vote!
bigdaddy67 said:
no matter what I do, the connection always times out. It seems my phone will not allow anything rom software to be installed. Where can I find enableapnew.cab? The rom software told me i needed that.
Click to expand...
Click to collapse
Also, which OS are you running on your PC? If its Windows XP, make sure you download Active Sync and install/run it. If you run Vista / 7, make sure you run the Mobile Device Center.
moved you're thread out of rom dev section, best of luck sir.
Update -
My OS is win xp and copied and installed the cab on my device. then I re-powered hold down the volume and got that tri-color screen with the usb connected. Started the HardSP app and have been waiting for 15 minutes as nothing seems to be working.
Did I miss something?
Got error 262
Ok I finally got an 262 error. I am not what I missed. Dl'ed the cab re-powered holding down vol key started HardSp app.
Help.
Stil need help
I am at home and my pc is vista. Can someone pls help get over this hurdle?
Please Please Please
Hi,
experiencing a problem with my Xda O2 branded German Touch Diamond:
after switching on the WiFi the device rebooted itself and continued to reboot permanently until I remove the battery. Battery is full actually.
I flashed the original ROM successfully (previous one was a BliZZard custom ROM v5), but the device is still continues to reboot.
For warranty reasons I need to flash the original stock SPL back, but no success with this. I flashed it couple ot times and the flashing CustomRUU.exe showed success each time. But after prooving the SLP it still shows 1.93.Olinex.
I tried also any other HardSPLs like Olinex 1.37... again the same problem. 1.93.Olinex is showed on boot.
Any idea how to solve the flashing problem or maybe also any hint about the reboot problem?
I have important stuff on the 4 GB internal flash. How can I read the contets considering the above problem?
Any help highly apprechiated!
Cheers
same problemm
Same problem. Any help?
tekata said:
Hi,
experiencing a problem with my Xda O2 branded German Touch Diamond:
after switching on the WiFi the device rebooted itself and continued to reboot permanently until I remove the battery. Battery is full actually.
I flashed the original ROM successfully (previous one was a BliZZard custom ROM v5), but the device is still continues to reboot.
For warranty reasons I need to flash the original stock SPL back, but no success with this. I flashed it couple ot times and the flashing CustomRUU.exe showed success each time. But after prooving the SLP it still shows 1.93.Olinex.
I tried also any other HardSPLs like Olinex 1.37... again the same problem. 1.93.Olinex is showed on boot.
Any idea how to solve the flashing problem or maybe also any hint about the reboot problem?
I have important stuff on the 4 GB internal flash. How can I read the contets considering the above problem?
Any help highly apprechiated!
Cheers
Click to expand...
Click to collapse
Any chance to MTTY? Might help, just guessing...
Or try to flash a new radio ROM as the wifi hardware might be stuck in a state that is unknown to the drivers. Flashing a radio is supposed to reset hardware but I may be wrong.
Really guessing here but symptoms shows relation to radio hardware.
Cheers,
Cina.
sspl
You need to run sspl first before flashing to the stock SPL. I did had this same problem changing my HSPL before.
You can find the sspl on the olipro CID/Security/Sim Unlocker, I think.
Hello, my solution to this was conductive interconnect of metalic parts as you can see here
://i.ytimg.com/vi/UUnH8O-1jII/0.jpg
(of course with http on the beginning, i'm not allowed to post links)
on the left with aluminium tape (sorry for image quality, found it on web).
It also seems that the sim card reader has to be conductively connected with the above em shielding.
Hope it will help
it´s a battery problem ... get a different one and your phone should be fine
Dreamtheater2003 said:
You need to run sspl first before flashing to the stock SPL. I did had this same problem changing my HSPL before.
You can find the sspl on the olipro CID/Security/Sim Unlocker, I think.
Click to expand...
Click to collapse
Please correct me if I am wrong. But as far as I understood, it is only possible to SSPL the phone after running the system on it (e.g. inside windows mobile) and not from outside (e.g. USB connection or so). The problem is, that I cannot access win mobile at all! It is continuosly rebooting in an infinite loop. Not even able to see the windows mobile logo at start.
@cina
how do I MTTY the phone? any idea, link, tool? again: if I have to be "in the system" in order to check, whats wrong, then it will fail.
@edefux
Do you already had such a case? I am not sure, if buying a new battery is economical enough only in order to try, if it works. I admit, it could be the battery. But running the phone with the charger switched on, should show if its the battery or not. I tried with charger on, but obviously this didn't solve the problem. Or do you mean, that in the battery there is some sort of "short circuit", that's confusing the Diamond no matter if the charger is on or not?
@DiamondFlower
Thanks for the suggestion. I'll give it a try, when I tried everything else
This will be the final try before burrying the precious Diamond.
Cheerz
MTTY.
tekata said:
Please correct me if I am wrong. But as far as I understood, it is only possible to SSPL the phone after running the system on it (e.g. inside windows mobile) and not from outside (e.g. USB connection or so). The problem is, that I cannot access win mobile at all! It is continuosly rebooting in an infinite loop. Not even able to see the windows mobile logo at start.
@cina
how do I MTTY the phone? any idea, link, tool? again: if I have to be "in the system" in order to check, whats wrong, then it will fail.
...
Cheerz
Click to expand...
Click to collapse
See this post for MTTY. This is the second post on Diamond ROM thread pinned for easy access anyway. Please search before you post!
If you can enter bootloader mode with VolDown pressed while reboot you're off to go. You can plug in USB cable and you can flash SPL, Radio or any new ROM. I assumed this based on your first post:
tekata said:
I flashed the original ROM successfully (previous one was a BliZZard custom ROM v5), but the device is still continues to reboot.
Click to expand...
Click to collapse
Cheers,
Cina.
it is a battery problem i´m 99,9% sure of it - i had the same case ... it was driving me crazy ... different roms, radios, but the problem persisted - luckily at that time i was working at a cell phone provider and could try different hardware, which finally brought me to the solution to switch the battery.
edefux said:
it is a battery problem i´m 99,9% sure of it...
Click to expand...
Click to collapse
Maybe I'm a bit unlucky, but I've got the 0,1%. Took a new battery, this didn't solve the problem though.
i´m sorry it didn´t work for you ... !
it's ok! it didn't work - actually I could have thought about it wont work: beforehand I sent the item to the mobile operator guarantee team and they returned it back - no warranty of course (due to olinex bootloader which I wasn't able to remove) and stating: Fremdeinwirkung/ Totalschaden (total loss). And because I sent it without battery and they obviously checked it ... suppose with a fresh or "good" battery. And it still didn't work for them, so...
I'll try to open it and see if there is some short circuit around the metal shielding. Maybe I'm lucky then.
Anyway thanks guys about the hints and suggestions!
tekata said:
Please correct me if I am wrong. But as far as I understood, it is only possible to SSPL the phone after running the system on it (e.g. inside windows mobile) and not from outside (e.g. USB connection or so). The problem is, that I cannot access win mobile at all! It is continuosly rebooting in an infinite loop. Not even able to see the windows mobile logo at start.
Click to expand...
Click to collapse
I'm not sure if its called sspl but you can run it from boot loader and it will black out your phone. after that you need flash the new bootloader.
I'm thinking its not a bootloader problem though...