(At&t's HTC Tilt 2 Unlocked, original ROM, win 6.5
)Guys, this is driving me nuts.
When I connect to the internet, via EDGE, both my browsers can't download data at all.
It's really weird.
I can send email on all of my accounts, use my facebook app, etc. It's just the browsers (IE and Opera) that are dead.
I have soft and hard reseted my device, and nothing changes.
When I'm WiFi, everything works Ok.
Any known issues about this?
Thanks,
Dan from Costa Rica
(as soon as I solve this, I'm planning on starting some serious mod of the phone... coming from an old HTC P4350, it's a huge step fwd).
perhaps, you have disabled the "proxy" - try enabling it.
My connection doesn't require a proxy... it's really weird, it was working OK a couple of days ago.
Shot it the dark, but look at Start -> Settings -> Connections -> Connections
Look at the Advanced tab and click on "Select Networks"
Make sure both drop-downs are set to use the correct connection. Not sure what it'll be called on yours, but on mine (T-Mobile) they are both set to "T-Mobile Data"
Also make sure your Wifi isn't on, but not connected to a network, when trying to browse. I find that if my wifi is on, but not connected, all browsers still try to use the wifi and fail.
Good luck,
notaliberal,
Thanks for the tip.
For some reason I had one of them set differently, BUT it's still dead.
Again, I'm pretty sure it's no the phone, since my emails work efforrlessly.
I'm pretty sure something happened with the config.
Damn, it's driving me crazy.
guys, Ok, this is driving me nuts.
I have discovered a couple of details that I think are important.
I have managed to make the BROWSERS work... but it's no a definite solution.
When I turn on the DATA CONNECTION, I was able to check emails, and use Facebook App with no problems at all.... but no browsers worked.
I found out that if i turn on my WiFi, but DO NOT connect to any network, now the browsers work perfectly. This gives me like 10-30 minutes of my browsers to work, but after that time I loose acces to data again.
I have to turn on the Wifi, and turn it off, to gain access again.
It's so confusing and weird, because I haven't read anything like this in the whole forum.
It seem that it's not a hardware thing, but a firmware or software issue... or am I missing something here?
Maybe this will help:
At&T Tilt 2 Original ROM
When turned on:
B 80
R 4.48.25.20
G 61.39tc.25.30h
D 1.59.67150
I had a similar problem and it turned out the carrier had put a bar on my internet usage, from long ago without my consent... Funny thing was, I could access the weather, update time and emails with no problem from my old Hermes but once I got the rhodium I couldn't.
Might be your carrier doing funny things....
Ultramag, and by any chance do you know what should I do to solve this? or what did you do?
The problem is that I don't know anyone with another Tilt2 to check if it's the phone or what.
Tonight I'll be checking with my old HTC P4350 to see if I have any trouble conneting.
Thanks.
Neu
Are you using a Tilt2 with stock AT&T Rom on a non-AT&T network? If so, maybe the best solution would be to install a custom rom. The old AT&T network connections might be getting in the way of your carrier settings. If you don't want to flash a custom ROM, go to settings, Connections, Advanced (tab), Select Network, and check that the programs are being directed to your carrier's connection. Also check on your browsers that they are set to connect to Internet, and not Work Network or anything else.
Jose, yes, I'm using AT&T ROM on a non AT&T network.
I did as you said, on the Advance tab set BOTH to connect to my carriers settings, and I still have the same problem.
I trid to do the second thing yu asked me to do, but I don't know where to find those settings on my browsers (IE and Opera).
If I have to install a costum ROM, I'd like to try first a ROM that's really basic... maybe an official HTC 6.5, to start. Any one like this that you could recommend?
Had to contact the carrier. Got stuffed around a lot. Luckily for me I knew someone who worked in a store, they got in contact with the faults department and 3 weeks later it got fixed.... Was a major pain in the arse though...
I just saw on the HTC page, that there is a ROM that is newer than the version I'm using.
Mine is from 09/25/2009 according to the Device Info, and HTC has a version from 02/05/2010
It's REALLY driving me nuts, so I hope this thing solves the issue.
Neuralgia said:
Jose, yes, I'm using AT&T ROM on a non AT&T network.
I did as you said, on the Advance tab set BOTH to connect to my carriers settings, and I still have the same problem.
I trid to do the second thing yu asked me to do, but I don't know where to find those settings on my browsers (IE and Opera).
If I have to install a costum ROM, I'd like to try first a ROM that's really basic... maybe an official HTC 6.5, to start. Any one like this that you could recommend?
Click to expand...
Click to collapse
A guy from India posted about a month or so with a similar problem, he had an unlocked T-mobile programed it with his carrier settings yet the browsers were not working, had to install a custom rom to solve it. I think some registry keys have the browsers going through different network settings. Have you tried using Skyfire, or Opera 10? Maybe a browser that didn't come with the phone will work.
Regarding custom roms, I've only used Energy's since I flashed my Tilt2, and they've worked great for me. If you want a clean rom, I've heard Da_G has one, and he's pretty well respected here. Just in case you're not aware, before installing a custom rom you have to install HardSPL and do some reading. Check the sticky threads in the roms sections. And Tilt2 phones need a CAB before they can be HardSPLed, check this page http://tilt2.blownfuze.org/.
Guys, I just updated my ROM wit the AT&T one, and the problem is still there.
I guess I'll have to install a costum ROM.
I'll follow the instructions from here:
http://forum.xda-developers.com/showthread.php?t=550540
But they never mention any CAB before the HardSPL? :?
-*-*-*-*-
Last dumb question:
Since I'll be testing new ROMS, once I HardSPL the phone and try a new ROM, i f I don't like it, I just have to flash a new ROM on top of the old one right? no more HardSPL? (aka HardSPL must only be done once?)
My main concern is that at first, I want a ROM as close to the original, but without all the AT&T crap.
Obviously, now I want something that solves this stupid problem with my browser, and now that someone in India had the same issue, I now it's not a matter of hardware.
Thanks.
Neu from Costa Rica
PS: Myphonw came both with Opera and IE. Actually Opera gives me much more trouble that IE with this issue. Unfortunately, now Skyfire only works on certain countries, and Costa Rica is definitely NOT one of them
It's not hardware or a ROM issue. Most likely that it'll be fine with a custom ROM, but I only use official At&t ROMs.
I had the same issue, as I don't use At&t as my network, and I fixed it. My IE and Opera, and other built-in phone services work fine.
Neuralgia said:
Guys, I just updated my ROM wit the AT&T one, and the problem is still there.
I guess I'll have to install a costum ROM.
I'll follow the instructions from here:
http://forum.xda-developers.com/showthread.php?t=550540
But they never mention any CAB before the HardSPL? :?
-*-*-*-*-
Last dumb question:
Since I'll be testing new ROMS, once I HardSPL the phone and try a new ROM, i f I don't like it, I just have to flash a new ROM on top of the old one right? no more HardSPL? (aka HardSPL must only be done once?)
My main concern is that at first, I want a ROM as close to the original, but without all the AT&T crap.
Obviously, now I want something that solves this stupid problem with my browser, and now that someone in India had the same issue, I now it's not a matter of hardware.
Thanks.
Neu from Costa Rica
PS: Myphonw came both with Opera and IE. Actually Opera gives me much more trouble that IE with this issue. Unfortunately, now Skyfire only works on certain countries, and Costa Rica is definitely NOT one of them
Click to expand...
Click to collapse
The CAB before HardSPL is mentioned here: http://tilt2.blownfuze.org/
Some people have posted on Energy's thread saying they can't use HardSPL with a Tilt2, and they were told that a Cab is needed, I assume the one posted on that website. HardSPL is only needed once, after using it you can flash and reflash TP2 roms and radios as long as they are for GSM phones.
Using Task29 is recommended before flashing roms, some people claim that flashing a new rom might not clean everything from the previous one, which causes glitches. For safety purposes I've start doing that, but I've never had any trouble when Task29 was not available.
Regarding a rom close to AT&T stock, I can't help you with that, you'll have to look at the different ones available. Since AT&T just came with a new version it's likely that many chefs will use it as base, but how far they modify it will depend on each one.
Grahammm said:
It's not hardware or a ROM issue. Most likely that it'll be fine with a custom ROM, but I only use official At&t ROMs.
I had the same issue, as I don't use At&t as my network, and I fixed it. My IE and Opera, and other built-in phone services work fine.
Click to expand...
Click to collapse
Graham, the question is HOW to fox it without a custom ROM.
I finally figured it out.
It seems that it's a PROXY issue.
Looking more into xda forums, I found out that there is a small program under START>Tools> Proxy Manager where you can Disable Proxy Settings.
Unfortunately, that ONLY fixes Internet Explorer.
Reading some more, you can fix Opera by entering on the address bar "opera:config" (without the ") in the proxy settings, remove the HTTP proxy and HTTPS proxy (leave blank).
The only problem is that this settings are removed in Opera with a soft reset.
the only way to change Opera settings permanently is to edit \Windows\Opera\opera.ini and set the Use HTTP and Use HTTPS proxy settings to 0, then soft reset.
Thanks to user Moltenfire (original post http://forum.xda-developers.com/showpost.php?p=5120862&postcount=3)
Thanks for all the help guys... Thanks to you, now, after all this, I'm decided to give the Simplicity ROM a try
-*-*-*-*-*-
Edit: It seem that after Opera 9, which is the one that came with my Tilt2, the settigs changed through opera:config STAY even though you reset your device.
I realized this because I didn't install Total Commander yet, did quite a lot of reseting, and Opera is working perfectly... so is IE!
PS: Just in case, in Opera9 the settings are called "HTTP server=" and "HTTPS server=" and must be left BLANK... in case you need to edit the opera.ini
Related
Back when I had the base Cingular WM5 rom on my phone I was able to talk on the phone and have my data connection going at the same time. Since upgrading to WM6, XDA Live .20 and Black 2.0 I have not been able to get that feature back. To make a call it has to disconnect me. Then once I get off the phone call the data connection connects again. I tried the Allways On option in HTweakC that came with the WM6 releases but that doesn't appear to be what I am looking for. Does anyone else notice this or have a fix?
My device maintains a data connection whilst I am on voice calls. I receive emails fine whilst talking. Its on Black 2.0
KanosWRX said:
Does anyone else notice this or have a fix?
Click to expand...
Click to collapse
yes.. try your phone and data in a 3G area... voice and data only works in 3G not edge......
I have tried it in a 3G area, right by my work I have 4 bars of 3G. But everytime I try to call or get a call it always closes the data connection.
try using bandswitch and manually fixing the phone to 3G only.. just to make sure its really on 3G and not secretly on Edge..
When I select the WCDMA Network I get the 3G Icon, when I select the GSM Network I get the E Icon. So I think it knows the difference between 3G and E just fine. I leave the "band" setting set to Auto.
BTW I am using radio rom 1.38.00.10 now, but even when I had the factory 1.16.00.00 I still had this problem with WM6. It only seemed to work with WM5. Another strange thing, in the phone app it says UMTS Cingular, just another sign it is actually using UMTS (3G).
Its just so annoying if I am online doing anything, slingbox, browsing the web, then when I want to make a call, it usually fails the first time while it disconnects then it goes through
Another odd thing probably just part of the new radio rom, when online and it starts to load data it switches to an H icon, I guess for HPDSA or whatever that abbreviation is.
Are you sure its really closing the data connection? Ignore the icons. Send yourself some emails and see if they arrive whilst on voicecall.
KanosWRX said:
When I select the WCDMA Network I get the 3G Icon, when I select the GSM Network I get the E Icon. So I think it knows the difference between 3G and E just fine. I leave the "band" setting set to Auto.
BTW I am using radio rom 1.38.00.10 now, but even when I had the factory 1.16.00.00 I still had this problem with WM6. It only seemed to work with WM5. Another strange thing, in the phone app it says UMTS Cingular, just another sign it is actually using UMTS (3G).
Click to expand...
Click to collapse
i was saying to do this as a test, just to make sure the phone wasnt doing something funny... just some basic troubleshooting to help find the problem...
kinda like if your car wont start.. there are different problems that could cause it, maybe its out of gas, maybe the fuel filter is clogged, maybe the battery is dead.. different things can cause similiar problems, its better to eliminate all possibilities
I tested it this morning, data and voice works fine at the same time. Called voicemail and then opened up IE and was able to load several pages while on the call.
Edit, where are you located? Is it possible there is a problem with the network there? Try downgrading back to the Cingular software and see if that works.
Shogunmark, I figured thats what you were getting at, and I tried all the options I could that would give me a connection to the network, but I still couldn't do data and telephone at the same time. Everytime I was connected online then went to place a data call it would have to disconnect me first. I tried doing a phone call then connecting online, but nothing would load.
I guess I could try going back to WM5, but I have hard spl 1.4 on so I gotta do a little rom editing of the cingular rom to get WM5 back I guess. didn't realize it was that complicated to go back to factory after installing hard spl.
Im surprised no one else has this issue. Its been like this for me pretty much as long as I have had WM6, so I doubt its the cingular network.
KanosWRX said:
Shogunmark, I figured thats what you were getting at, and I tried all the options I could that would give me a connection to the network, but I still couldn't do data and telephone at the same time. Everytime I was connected online then went to place a data call it would have to disconnect me first. I tried doing a phone call then connecting online, but nothing would load.
I guess I could try going back to WM5, but I have hard spl 1.4 on so I gotta do a little rom editing of the cingular rom to get WM5 back I guess. didn't realize it was that complicated to go back to factory after installing hard spl.
Im surprised no one else has this issue. Its been like this for me pretty much as long as I have had WM6, so I doubt its the cingular network.
Click to expand...
Click to collapse
not at all, just drop a WM5 NBH into a folder with CustomRUU and use autodetect. it'll flash quite happily
How would I take the HTC Cingular rom (found here, http://www.america.htc.com/support/8525/software-downloads.html) and get the WM5 NBH? Or will I have to use another WM5 version?
Just chiming in to say I don't have this problem and I've used both those roms and still using WMXL 0.20 now and use data and calling all the time. I am using the same radio ROM as you now too and it still works ok.
What apps do you have installed? anything that would end the data connection for some reason? Maybe put a list of apps and customisations you've made since installing the WM6 rom you have?
You could also try it with a blank WM6 rom, manually add the data connection settings and try and see if that works? Just to eliminate 3rd party apps and thing's you've changed.
The only other similar thing i can think of is I do remember there was an issue where data would disconnect when changing between 3G and EDGE. I don't remember who had this problem or why but it could be related.
Let us know how it goes?
Maz
--------------
This would be great to add to the bug tracker website when I finish it.
http://maz.net.au/
KanosWRX said:
How would I take the HTC Cingular rom (found here, http://www.america.htc.com/support/8525/software-downloads.html) and get the WM5 NBH? Or will I have to use another WM5 version?
Click to expand...
Click to collapse
Use this guide to go back to the Cingular ROM.
http://www.mrvanx.myzen.co.uk/hermes_guide/Downgrade/index.html
Here are the apps I have
Resco File Explorer
Core Media Player
Slingbox
Don't run to many apps on my ppc as you can see. I mainly just use it to stream media from home (orb, slingbox), and internet connection sharing. I'll probably find some time tonight to revert back to WM5 and let you know what I find.
Well I just flashed back to the cingular rom, and guess what it's working again, can talk on the phone and be on the internet at the same time. So weird. well I guess I will try going back to Black 2.0 and see what happens.
Kanos,
Your problem is definitely not WM6. As in WM5, I can concurrently browse the internet during a voice call. As Mark said, there may be other issues specific to your case -- you'll have to methodically eliminate one-by-one... you'll have to decide if the process is really worth the time yourself.
FWIW:
Radio 1.34
HERMES 200 HT625 (in use since 7/4/2006)
Network: Manual (Taiwan UMTS)
Band: Auto/GSM(900+1800)+UMTS(2100)
Cheers
I believe it's not truly a problem with WM6, as people obviously have gotten it to work. I will definitely look into it more and keep you all updated on what I find. Right now I am still on WM5 but I will flash back to WM6, no apps installed, right after a fresh hard reset and see if it works or not for me.
I decided to try LVSW this time. Guess what it worked, I was able to both data and phone at the same time. Next test will be to install Black 2.0 again and see what happens.
My theory is this, I had XDALive .10 and maybe that version had this issue, then when I upgraded to .20 it carried over somehow and then carried over to black 2.0. Then once I went back to WM5 it reset everything. Don't ask me how, but obviously I have a lot more flashing to do to test this theory.
the imate site on wm5 proclaim this as a problem. when u r receiving data at a specific point in time u cannot receive a call.
the aust. telstra latest release says the upgrade fixes this.
to bypass going back to wm5 i just used the xda radio only upgrade to try and bypass. this was i believe only when receiving data and a call inwards simultaneously.
otherwise i have never had ur problem n likely a flash issue.
there is another i have noticed in recent releases is activesync now asks to allow data to be received when activesync this is a 4.5 change so perhaps looking for this setting may also help ur simultaneous data issue. just a guess but it might have been easy to not allow this when u upgraded to wmg which rwquired 4.5 to do this.
anyway goodluck with it.
Could I please be so greedy as to have a Orange-UK only thread?
I am been reading and searching in earnest to see what other peoples experiences are with the various Radio ROMs. It seems most people are happy with 1.38.00.10, although seems to be a few instances of people sticking with older versions because of battery life/drop outs/data freezes. But I am unable to establish what other people are experiencing in the UK on Orange's network.
I am well familiar with the Radio ROM 1.38 + WM6 - good or bad? thread, but not many people in there commenting on Orange UK.
If you are on Orange UK, please can you share you experiences here?
My own experience has been thus.
Before upgrading to WM6, was on stock M3100, which had Radio 1.06 I beleive. This worked flawlessy with push email (Exch 2003), and never had any problems at all with it. This was also the case when I upgraded to LVSW 20070315, leaving Radio Rom as was.
Then I upgraded to Black 2.0 last week, and did the Radio to 1.34 with it. I didnt notice any problems at first, or rather didnt take much notice of not getting email notifications whilst at work. But on Friday I realised the Data connections were freezing.
I have tried going to 1.38.00.10, to 1.35, back to 1.06, even 1.27. Have also tried going back to LVSW 20070315, and am now on LVSW 20070408
I have narrowed it all down to the "common" problem in swicthing between GSM and 3G. At home I seem to be between 3 transmitters, and swicthing is common. Hence the problems I was having Friday.
The Excellent commmgrpro has helped here. Also Bandswitch.
Anyway, with Phone set to GSM only I have no problems. Odd thing is, driving to Sheffield and back yesterday (dont mention the football!!), with phoen set to Auto, I had no problems at all.
Yet at home, and at work, on auto the data connection freezes.
So.... Whats everyone else using on Orange?
i've been using rom 3.23.0.2 with radio 1.38.00.10 on a spv m3100. this device is been freezing like you described in your post, thing is, it's become unuseable since you have to reboot after the freeze and it happens almost continiously... driving me insane.
if anyone knows of a way how to get back wm5, i'd appreciate it!
freben
When I upgraded a while ago I was wondering the same thing. The only negatives re 1.38 at the time seemed to come from orange UK customers so I went for the 1.27 radio and it seems fine.
Have not yet stepped up further, and at the moment, see no reason to.
Especially as I can even get the H now and then. (If it aint broke...)
@Phil, I've "gone black" (v 2.0) with Radio 1.38.00.10 - only since Saturday, so it may be too early to tell. I've got a push email account with Mail2Web, which I don't tend to use that regularly - it's good for aggregating lots of mail stuff when I go away on business, but my data package ain't up to much (don't get me started ) so I only switch it on when required.
Since installing the new ROM/Radio/SPL, my M3100 seems to be much better than it was prior to the update. I've reinstalled all my apps (apart from PPCProfilesPRO - I'll do that tonight) and the phone seems really stable - no more random lockups when taking it off charge and only a couple of "slowdowns" when ending calls, or if Activesync'ing....can't really complain if I'm honest
I'll keep an eye on things - and maybe switch on the Exchange push email for a couple of days - and I'll post again if the situation changes.
Cheers,
Mark.
PS - Message for @freben; read MrVanx's guide on downgrading to WM5 - see THIS POST for details of how to find it.
MrVanx kindly provides a guide here: http://www.mrvanx.myzen.co.uk/hermes_guide/Downgrade/
Do please read very carefully before trying it
Yep...1.27 for me. No real radio problems to report.
Spent a couple of weeks with WMXL 2.0 and the last two weeks with Black 2.0. Both work fine with Orange with 3g (inc HSDPA) and voice. Direct push/web/pop email all fine.
One freeze this morning (first one in two weeks) but dont know if it was radio or os or an app?
Can;t compare with other radios but simply can say am happy with 1.27 (hence why I havent tried 1.38 etc)
Having no problems with set up in sig.
had the freezing with the stock set up.
Could/should we be more scientific here and use one of the many web2.0 survey sites to do a ROM/OS survey to find the right mix?
with a little effort we could then find the most reliable Radio ROM and view by Country/OS/carrier/etc.
just a suggestion..
Mark Crouch said:
but my data package ain't up to much (don't get me started ) so I only switch it on when required.
.
Click to expand...
Click to collapse
@Mark,
try Orange World Browsing, 8ukp for unlimited data access 24/7
Give O a call on 150 and then the billing option, 4
Orange World Browsing is what is what the O rep told me it was listed as. I think one of the key points is the cost, it’s 6.81 exc VAT or 8 inc VAT, that’s the way to check you have the right package.
And you need to be on a 35ukp per month tarif or more to get it.
apologies for off topic post!!
(I was told it was Orange World Unlimited)
unwired4 said:
(I was told it was Orange World Unlimited)
Click to expand...
Click to collapse
My bill confirms it as Orange World Browsing -although I too thought it was OWU.
Not sure if it is still so hard to get as it once was.
Sheep_Head - Well, I am definetely up for using a survey site - any recommendations?
I gave re-flashed my phone back to Black 2.0. Seems to be what most people are using here (IMHO). Have tried Radio 1.27, 1.38.00, and right back to 1.07.
With a totally clean device (i.e. straight after flashing), setting up the orangeinternet connection manually, the thing just wont connect to 3G. Only when I have Band set to GSM will it connect.
Jeez!
I am now in the process of going back to an Orange WM5 rom, to see if it makes any difference, (albeit the Romanian one, so will have to reset the internet connection).
Getting mildly frustrated now.
OK, I'm now back to Orange Radio version, and Orange WM5 -(Romanian!)
Entered Orange Internet settings. And have gained nothing. COnnects via GSM, but not via 3G.
Grrrrrr....
Spoke to Orange CS - no reported 3G problems in my area (well, what about me???).
What's the panel's opinion on sending a phone back to O with OliPro's bootloader on it? (well, and the Romanian Rom, but they prob wouldnt spot that).
I have insurance etc, so would get a replacement in advance....
philg2000 said:
OK, I'm now back to Orange Radio version, and Orange WM5 -(Romanian!)
Entered Orange Internet settings. And have gained nothing. COnnects via GSM, but not via 3G.
Grrrrrr....
Spoke to Orange CS - no reported 3G problems in my area (well, what about me???).
What's the panel's opinion on sending a phone back to O with OliPro's bootloader on it? (well, and the Romanian Rom, but they prob wouldnt spot that).
I have insurance etc, so would get a replacement in advance....
Click to expand...
Click to collapse
dude as a last ditch attempt can you try out flashing LVSWs latest ROM?? Make sure your settings are good and post the results?? (it wont take long)
Hey guys - mega useful thread.
I 'thought' I had solved all of my woes and was feeling bloody smug with myself as I thought I had managed to keep the stupid questions down to a minimum. After reading this obviously not .
I am running Black v2.0 (happily) and the rest of the handset is as per my sig block but I have removed spb pocketbooks and replaced it with shell. I thought it was all working correctly but I am suffering the same connectivity issues as yourself (gprs and not 3G).
Also - and I have read the threads but still not working (was going to try again after a re-re-re build I still have no VM notifications.
Anything I can help with or test let me know and I will do what I can.
Bezman.
wberesford said:
Also - and I have read the threads but still not working (was going to try again after a re-re-re build I still have no VM notifications.
Bezman.
Click to expand...
Click to collapse
I have just tested the voicemail fix again since my reinstall and the certificates cab plus installing the sms dll has always worked for me.
Are you having any specific issues with it?
CrazyC,
I am struggling with the whole copying over of the .dll file in the widows directory. Like I said I have done a search of the wiki on VM notifications etc and followed the directions. I have attempted using Activesync but keep getting a response saying that the destination is in use. I have tried directly on the handset (not expecting it to work) and it doesn't and finally I tried by using Total Commander. Still no joy. I will keep going with it though as I was thinking about building again from fresh anyways, and then attempting the vm notification from clean.
Gonna wait out for black v2.5 before I do that however.
Cheers for getting back to me though!
Bezman.
mrvanx said:
dude as a last ditch attempt can you try out flashing LVSWs latest ROM?? Make sure your settings are good and post the results?? (it wont take long)
Click to expand...
Click to collapse
Hmmm... I dont think that will achieve anything. I have had the latest LVSW ROM on there a while bad, with the same problem.
I'd really like to hear from anyone who has returned a flashed M3100 to Orange.
wberesford said:
CrazyC,
I am struggling with the whole copying over of the .dll file in the widows directory. Like I said I have done a search of the wiki on VM notifications etc and followed the directions.
Bezman.
Click to expand...
Click to collapse
The only way I have done this recently is using Resco File Explorer. You need to go into the Options menu to ensure you can see all files, then copy the sms_providers.dll into the \Windows directory. It warns you, but if you say yes it lets it happen. I have done this numerous times (have flashed my phone about 10 times recently!) without any problems!
wberesford said:
CrazyC,
I am struggling with the whole copying over of the .dll file in the widows directory. Like I said I have done a search of the wiki on VM notifications etc and followed the directions. I have attempted using Activesync but keep getting a response saying that the destination is in use. I have tried directly on the handset (not expecting it to work) and it doesn't and finally I tried by using Total Commander. Still no joy. I will keep going with it though as I was thinking about building again from fresh anyways, and then attempting the vm notification from clean.
Gonna wait out for black v2.5 before I do that however.
Cheers for getting back to me though!
Bezman.
Click to expand...
Click to collapse
First few times I did this, it just copied OK with the file explorer. Most recently tho it gave me the same error - so I went to the zip file on my ppc and told it to extract directly to the windows folder, said yes to overwrite and it did. Maybe worth a try. (install the certs first incase it makes a difference.)
SMS Providers CAB
To make my life easier I put the sms_providers.dll from WM5 into a CAB. To install make sure you've installed the sdk certificates (http://forum.xda-developers.com/attachment.php?attachmentid=35814&d=1174572298) first and then install this cab - a soft reset is requested at the end of installation and is required.
I've tested this on the latest LVSW ROM and it works perfectly, hopefully will overcome peoples issues with copying this file.
Hi,
Just upgraded my rom, and for some reason, when i go the the orangeworld site in pie, it only displays a text version. No graphics or anything.
Any ideas?
all these fantastic genius's here, and no ideas?
I have noticed this too, and it must be something to do with what PIE reports itself as for User Agent.
The sites work fine with Opera, but cant see if that reports as Mozilla for whatever.
We need someone with WM5 to look....
philg2000 said:
I have noticed this too, and it must be something to do with what PIE reports itself as for User Agent.
The sites work fine with Opera, but cant see if that reports as Mozilla for whatever.
We need someone with WM5 to look....
Click to expand...
Click to collapse
I use PIE+ and tried all the user agents, but no change. Also noticed gprs/3g connection is real unstable! I'm in london, so definately a good coverage!
Erm....?
Any ideas?
What is the URL? Assume you have "show pictures" set etc ? I have black 3.1 on T mobile (well, virgin) and connection seems stable. This is on a m3100
Yeah I noticed this before too... I've only installed Black up to 3.0, so it the problem existed in at least version, maybe earlier.
http://wap.orange.co.uk for orange world. WEorks in opera fine. in PIE every other site i look at displays correctly, only orange so far is appearing as plain text.
As for the connection, i'm using the latest radio upgrade. to be honest, the connection was pants when i had the standard os installed, but then upgraded the radio, which improved it. But now i upgraded the os, the connection is worse than ever.
Also, Skype refuses to log in!
I'm pretty much ready to the sell piece of $h1t on ebay and get something else!!
So nobody able to help me?????
I don't use Orangeworld. Sorry. Have not had this issue. What apn are you using, the orangewap one or the orangeinternet one?
crazyC said:
I don't use Orangeworld. Sorry. Have not had this issue. What apn are you using, the orangewap one or the orangeinternet one?
Click to expand...
Click to collapse
orangeinternet
crazyC said:
I don't use Orangeworld. Sorry. Have not had this issue. What apn are you using, the orangewap one or the orangeinternet one?
Click to expand...
Click to collapse
I dont think its down to that in any case, coz it works fine with Opera.
yeah I know, just grasping at straws. I seem to remember that some of the orange sites only worked via the orangewap apn. never use them so dunno really.
Hi, sorry am unable to help as I have same on orangeworld, but would just recommend that before you sell, you try reverting the radio version to 1.38.0.10 or .01.
Makes it a whole different phone, no dropped signals, better battery.
gibster said:
Hi,
Just upgraded my rom, and for some reason, when i go the the orangeworld site in pie, it only displays a text version. No graphics or anything.
Any ideas?
Click to expand...
Click to collapse
Yeah, no problems - orangeworld works fine in PIE for me WITH graphics (after I fixed it of course!!)
First I would recommend the latest Orange Radio ROM which is 1.38.00.01 - works best for Orange UK (this is not necessary for my fix to work though.)
See my cab file which installs the Orange UK MMS and internet settings as well as fixing the voicemail icon issue and the orangeworld graphics issue
If anyone needs it, I suppose I could create a cab file containing just the fix for orangeworld on PIE
Ok, here is the cab to just fix the Orangeworld site on Orange UK - it also fixes the voicemail icon since this is kinda essential
This should work on all WM6 ROMs on Orange UK
ps. you DO NOT need this file if you are using the cab file in the post above
Thanks alot Rabdo!!! I'll try the radio downgrade when i get home!!! Orange now works a treat!!!
Thanks!!
Just a quick question. What was the problem? It almost looked like it didn't pick up the css or something, but the strange thing was the fact every other site i looked at was fine. Would be nice to know exactly what was up with it.
rabdo! my wife can have your babies if you like!
radio fix and settings cab have sorted me right out!
keep getting the "H" symbol. did a quick test and was close to 500kbs! not sure how reliable that is, but just browsing now is a dream, and no connection dropped!
thanks a lot!
gibster said:
Just a quick question. What was the problem? It almost looked like it didn't pick up the css or something, but the strange thing was the fact every other site i looked at was fine. Would be nice to know exactly what was up with it.
Click to expand...
Click to collapse
I have a similar problem on 3 UK in that none of the icons on Planet 3 show up - is this cab something generic that might fix my problem? My phone is working nice and smoothly and the moment so don't want to install it just in case.....
Hello there,
What I Have: Att 8525 Herm100
Rom: Att's Mobile 6
Everything is stock but the extended life battery
The problem I am having is when ever I try to activate my WiFi the phone doesn't do anything. I am not sure if there is a wifi card or not but that's want I want to know. I have tried everything from activating it in com manager to going into the settings and activating it manually and nothing happens it acts like I didn't even hit the button to activate it. Is there a wifi card in the phone or is it integrated on the motherboard in the phone. Note: I bought this phone off e-bay and the wifi never worked when I received the phone.
I am new here and if there is a post about this already I am sorry.
I hate it when that happens.
To begin, there were two ATT OEM WM6 roms relevant to the 8525 that I noticed deep in the bowels of XGA.
I chose the later file (higher revision numbers) I found it here:
http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
From comm manager when I click the tower button on within a second the spinning windoze icon shows something is happening. It then starts "sniffing" for my preset wifi connection (ATT supplied 2wire portal 802.11g).
Now, if yours does not show the spinning windoze working icon when you turn on wifi? There obviously is a problem. This could be software, or hardware related (duh). If there is no error message related to "wifi is not an option, unavailable, or screwed" then my first guess is there is something missing or damaged in the ROM update that was applied to your device. As far as I know all 8525 (herm100) were shipped with wm5. It had been mentioned in the volumes of xda that the first AT&T WM6 rom was a little buggy. Try the later released AT&T WM6 update.
It was a run file so no muss no fuss. Sync the phone run the update from the pc, three minutes later the phone is flashed to ATT WM6 professional.
You could take it to a ATT shop? But, I think that without a doubt they would hand it back and say you need a new phone with a 20 year contract and 3g data plan even Obama would blush at.
Try the hard reset. take a picture of the startup screens so you have the numbers and see if the wifi startup is working after the reset. If not then compare the numbers to the above mentioned roms. If the indications are you have the first issue of WM6 from ATT try flashing the second release. If that still fails then your device could indeed have a hardware problem.
The wifi is indeed built into the system and if that chip on the board is not working it could be a overly expensive problem. Possibly a shop has a working board they would swap out cheap? Otherwise, it is a fun phone you can keep notes on, run gps software if you have a bluetooth gps receiver and software like tomtom.
To be honest the wifi on my 8525 has been convenient when around the house to check the local weather radar when I hear a thunder outside, or browse headlines from the porcelain room or even leave messenger turned on incase a gamer friend is looking for someone to get shot up in a game.
I have used the live search voice thing to amaze the neighbors once. But, the limited range of wifi is a real drawback to how truly wonderful that addition could be.
HELP Please! Wi-Fi not working!!!
Hi to XDA all users !!!
MY Hermes - HTC TyTN [Herm200]
I bought HTC Hermes myself year ago.
there was flashed a WM5.0, I've just downloaded from here HARD SPL & WM6,1 (Custom) Flashed.
Wi-Fi will works on WM5.0.
Well here I am at 6.1 flashed and now is not working Wi-Fi. When i pressed Power ON - loading long and nothing happens.
Other methods are also tried on Commanager and Settings - but did not help.
What do I need to do my dear.
HELP!
Thank you for your attention!
Hi Nurk.
Since the wifi worked on wm5 but failed after the 6.1 flash. I would guess the problem is in the 6.1 components. You might start with contacting the kitchen rom you employed for WM6.1 thread and see if this has happened to others. Next step would be to check the radio rom version. I did see on xda an assortment of Radio roms.
If your not totally in love with the current rom you have flashed? Try another 6.1 or even a 6.5 and see whats poppin.
and what you have in HKLM\Software\HTC\CommManager\WLAN\DeviceName?
utak3r said:
and what you have in HKLM\Software\HTC\CommManager\WLAN\DeviceName?
Click to expand...
Click to collapse
I have get this from registry:
HKLM\Software\HTC\CommManager\WLAN\DeviceName - {98C5250D-C29A-4985-AE5F-AFE5367E5006}\TIACXWLN1
I currently have a blackberry, and the most annoying thing about it is that internet connection is controlled by the app rather than by OS. That is, an app has to be programmed to use WIFI, or mobile internet, or both. Rarely are there apps that have been created to use both, its one or the other. I use one AIM app when I'm on wifi, and another AIM app when i'm mobile. I want to be able to control what I use via the OS like it SHOULD be done. For example, my laptop doesnt care if I connect via wifi or ethernet, as long as XP sees internet, all my software can connect. Is this the same for Windows Mobile?
Also, there are some TP2s on craigslist that say its been flashed with custom ROM with hardspl. Is there a way to revert back to stock? Also is it possible that the seller messed up the flashing, in which case, can I somehow make sure its done properly by reflashing hardspl fresh?
Thanks in advance
Welcome to Windows Mobile!
It doesnt matter what connection you have the browser will automatically pick up on it and connect to the internet using that connection. If you are on wifi it will use wifi and if you are on edge,3g,gprs it will use those. Now if you change connection types while the browser is up you might have to reload the app for it to pick up the new connection but no programming needed.
Secondly you can flash the hard SPL in the ROMs section to have a good SPL and then you can find the version of the device you have's stock ROM. I've already downloaded and reflashed the T-Mobile USA stock ROM after flashing my device to 6.5 and not liking it.
Have a deep read here so you can understand better all the process
http://forum.xda-developers.com/showthread.php?t=550540
Good luck and enjoy!
thanks for the info. I'll will give that a read. And read over the wiki again, I just skimmed through it the first time.
Also just wanna say, why the heck did tmobile have to butcher the TP2, I liked the original look MUCH better.
ace.app said:
Also just wanna say, why the heck did tmobile have to butcher the TP2, I liked the original look MUCH better.
Click to expand...
Click to collapse
Yes, all carriers thought their themes look better. Anyway, we can always put in our themes.