Related
MOD EDIT: REMOVED DOWNLOAD LINK UNTIL OP REPLACES MDJ'S KERNEL WHICH IS NOT IN COMPLIANCE WITH GPL
-= CMYLXGO's Topia HD(2) ROM =-
Build v.2.1.0n [Kernel: MDJ 10.4 OC]
THIS IS FOR T-MOBILE
This is a CWM build and will require Clockworkmod Recovery.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-= ALL T-MOBILE APPS WORK OUT OF THE BOX INCLUDING MMS =-
Whats Included:
ROM is not using squashfs
Deodex and Zipaligned
Approx 530MB Free on first boot on LEO1024
4 Custom TopiaHD Skins
Custom Ringtones and Alerts
Custom Boot Animation
File Explorer
gMail v2.3.2
Google Maps v5.0.0
Facebook v1.5.1
GPS Test - Used to get intial aGPS data for quick lock
drocap2
LED me know
XDA Forum App - Skinned by CMYLXGO
Updated Android Market App
Minor tweak to stock taskbar - To match all skins better
Skinned Keyboard - To match all skins better
What's Not Working:
Sharing from Camera App
720p recording
How to flash and get up and running with CWM & CMYLXGOroms
Do you have magldr v1.13 Installed? Skip this part if you do...
Download MAGLDR v1.13
Unrar DFT_LEO_MAGLDR113_DAF.rar
Power off phone. Pulling the battery does the trick
Power on phone while holding vol down button and wait for rainbow bootloader screen
Run ROMUpdateUtility.exe
Phone will reboot after flash
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=506873&d=1296659361
Have you previously installed CWM with a 425mb partition? If not or you don't know please complete thess set. If you already have, skip this part...
Downlaod from the first post CMYLXGOs.ClockworkMod.Recovery.Partition.Setup.02.04.2011.rar
Unrar CMYLXGOs.ClockworkMod.Recovery.Partition.Setup.02.04.2011.rar
Power up or reboot phone and hold down the red end/pwr key until MAGLDR Boot menu: appears
Scroll down to option 5. USB Flasher and hit the Green Send key
Plug phone into PC and run DAF.exe
Phone will reboot after flash
Click to expand...
Click to collapse
Flashing a CMYLXGO CWM ROM is now a very easy thing to do...
Download your favorite flavor of CMYLXGO ROM to your PC or directly to the SDCard on your phone
Reboot phone and hold down the Red/End/PWR button until the MAGLDR Boot menu appears
Scroll down to option 8. AD Recovery and hit Green/Send key
Phone will now boot into ClockworkMod Recovery Mode
Scroll down to 'install zip from sdcard' and hit Green/Send key
Scroll down to 'choose zip from sdcard' and hit Green/Send key
Scroll down to your favorite CMYLXGO ROM and hit Green/Send key
Scroll down to 'yes - install CMYLXGO...blah...blah...blach.zip' and hit Green/Send key
Sit back and wait approx 2-5min. Don't worry if the progress bar does not move
Once you get the rom flashing has completed message hit the back arrow key
Scroll down to 'reboot system now' and hit Green/Send key
All done! Let phone boot normally
Repeat these steps only for future CMYLXGO ROM flashing
Click to expand...
Click to collapse
-= MUST USE CMYLXGOs.ClockworkMod.Recovery.Partition.Setup.02.04.2011.RAR TO UPDATE KERNELS =-
Backup with CWM prior to updating kernel or you will lose all data.
Change Log...
v2.1.0n
-Moved to new base: CMYLXGO's Stock Desire HD(2) v2
-Updated kernel to MDJ's 10.4 OC
-Fix root issues. ROM is fully rooted now.
-Fixed browser crash with embeded flash sites
-Fixed audio only for streaming video sites
-Changed boot splash screen to match stock Desire HD boot animation
-Updated Market
-Updated FaceBook to v1.5.1
-Tweaked CWM install script
-Updated FlashPlayer to v.10.1.106.16
-Fixed Voice Search Force Close on first boot
-Rebuilt update-script from the ground up
-Data and Cache are now formated when flashing this ROM [SETTINGS WILL BE LOST]
-Added some CMYLXGO flare to CWM flashing script
-Tweaked taskbar Battery Icon
-Discontinued DFT builds. CWM FTW!
v1.4n
- patch su to v9.9.9
- Updated Kernel to MDJ's 10.2OC
- removed T-Mobile Visual Voicemail. When cooked in settings are lost on reboot.
- removed T-Mobile MyAccount
v1.3n
- Fixed root
- Fixed WiFi MAC Issue
- Updated kernel to MDJ's 10.1OC
v1.2n
- Fixed Voice Search
v1.1n
- Updated hosts file with current ad blocking list
- Removed GPS Test
- Added GPS Status & Test
- Downgrade Flash from 10.1.105.6 to 10.1.92.8 to resovle Browser Crashing
v1.0n
-Initial Release
-= CMYLXGO's Carrier Splash Screens =-
To install Splash Screen power up phone while holding the volume down button to put phone in boot loader moede. Run Leo_Splash.Screen.Updater.exe
Download Red Splash
Download Grey Splash
Download Blue Splash
-= Enable DROID Bootup Audio =-
http://forum.xda-developers.com/attachment.php?attachmentid=511579&d=1297111107
-= Disable DROID Bootup Audio =-
http://forum.xda-developers.com/attachment.php?attachmentid=511580&d=1297111107
Flash via ClockworkMod Recovery. This will not delete your data.
First!!!! Hahahahahahahahahaha
EDIT: Ok on a serious note, does this ROM allow you to reboot/shutdown with USB/charger connected and NOT get stuck with the orange LED? I've been having this problem with all NAND ROM's. The ROM looks great though, man. I'm really digging the GreenTopia theme Will test shortly!!
just wondering what is the max mms size and also does the wifi tether work...im using Desire Nand build 1.1n...everything works great on that build with no complaints...but i like this version better...looks cooler...thanks
third hahahahaha
I should have waited a day! haha. Oh well... Looks like I have to flash this when I get home tonight.
maff1989 said:
First!!!! Hahahahahahahahahaha
EDIT: Ok on a serious note, does this ROM allow you to reboot/shutdown with USB/charger connected and NOT get stuck with the orange LED? I've been having this problem with all NAND ROM's. The ROM looks great though, man. I'm really digging the GreenTopia theme Will test shortly!!
Click to expand...
Click to collapse
"First"
is there a prize or something?
matthew33 said:
"First"
is there a prize or something?
Click to expand...
Click to collapse
Nah, I just got a little carried away.
kawika64 said:
just wondering what is the max mms size and also does the wifi tether work...im using Desire Nand build 1.1n...everything works great on that build with no complaints...but i like this version better...looks cooler...thanks
Click to expand...
Click to collapse
This ROM uses the same base as my Stock Desire HD 1.2n build without squashing the file system. I have added more apps and of course my badass skins
-CMYLXGO
Hotfile.com download speed is VERY slow.. I'll try to get a few other mirrors up. This build looks like a keeper to me
maff1989 said:
Hotfile.com download speed is VERY slow.. I'll try to get a few other mirrors up. This build looks like a keeper to me
Click to expand...
Click to collapse
Please don't mirror...I get paid by hotfile for every download. It's not much...but every penny helps.
-CMYLXGO
Thank you so much I've been waiting for this. Finally, an unsquashed HD ROM without everything removed. Thank you. Gonna try it out..
Wow! Now we're talking. This is almost pure perfection My only thorn in the side is the @$%&* EU sized ROM in my phone. Any chance of version more suitable for the EU sized Leos? *blink, blink*
Edit: I just realized that this probably should've been posted in the 1.2 thread. Sorry
Sent from my HTC HD2 using XDA App
cmylxgo said:
-= CMYLXGO's TopiaHD ROM =-
Build v.1.0n [Kernel: gauner1986]
THIS IS FOR T-MOBILE AND WWE
http://hotfile.com/dl/94510056/ac09e5b/CMYLXGOs.Topia.HD.NAND.Edition.v1.0n.7z.html
This is a NAND build and will require MAGLDR.
-= ALL T-MOBILE APPS WORK OUT OF THE BOX INCLUDING MMS =-
Whats Included:
ROM is not using squashfs
Approx 530MB Free on first boot on LEO1024
4 Custom TopiaHD Skins
Custom Ringtones and Alerts
Custom Boot Animation
ES File Explorer v1.4.8.7
gMail v2.3.2
Google Maps v5.0.0
Facebook v1.5.0
GPS Test - Used to get intial aGPS data for quick lock
drocap2
XDA Forum App - Skinned by CMYLXGO
HTC Battery Widget - Blue Skin
Updated Android Market App
T-Mobile Visual Voicemail
T-Mobile MyAccount
Minor tweak to stock taskbar - To match all skins better
Skinned Keyboard - To match all skins better
What's Not Working:
WiFi MAC is fixed to 00:11:22:33:44:55
Bluetooth MAC is fixed to 50:C3:00:00:00:00
720p recording
1. Download MAGLDR 1.11
2. Download ROM from link above and extract
3. Install MAGLDR. Either put phone in bootloader mode or boot into Windows Mobile. Run ROMUpdateUtility.exe from MAGLDR folder.
4. Boot Phone and select in the menu "4. USB Flasher"
5. Run DAF.exe on your computer from my ROM download.
6. Once flashing is done the phone will reboot.
7. Phone should boot directly to Android in NAND.
Thanks to the DarkForceTeam for making this possible
Thanks to gauner1986 for the kernel
Thanks to sopL87 for packaging my TopiaHD Skins
Click to expand...
Click to collapse
I go out to the truck for a few minutes and come back in to see something this awesome on here.
You rule. Thanks for all you do.
Downloading now.
cmylxgo said:
Please don't mirror...I get paid by hotfile for every download. It's not much...but every penny helps.
-CMYLXGO
Click to expand...
Click to collapse
Ohh my apologies, sir. I haven't mirrored yet but thanks for the heads-up. Sooo for every person that downloads your file from Hotfile you get paid? or is it for every time you upload? Just curious.
is this build rooted properly or do i have to use other methods to root?
ridikolous said:
is this build rooted properly or do i have to use other methods to root?
Click to expand...
Click to collapse
Rooted proper!
How would your rate the peformance of this build? As I recall original NAND bluetopia ran pretty fast. Does this puppy fly? Homescreen/Webpage scrolling @ 60fps?
Also, can fonts be changed by dumping new fonts to sdcard\fonts folder? I didnt like the curvy font style of original topia, and would like to know how I can change them.
maff1989 said:
Ohh my apologies, sir. I haven't mirrored yet but thanks for the heads-up. Sooo for every person that downloads your file from Hotfile you get paid? or is it for every time you upload? Just curious.
Click to expand...
Click to collapse
Something like 1 cent per download...but the more people download the higher my status goes...the higher the status the more I get paid. I think when I hit plat its like 3-5 cents per download.
Yesterday I made just over a buck
Earnings Table
100 - 2000MB File Size
Copper $4
Bronze $7
Silver $10
Gold $$12
Platinium $15
Note: All prices are for 1000 downloads.
[DISCONTENTED] [ROM ZIP]CMN v1.02V2/2.0 [RMNET/PPP] [THEMED/MORPH] [STABLE & FAST]
Clockwork Recovery Version of OCM's CMN CM6.1 1.02V2 & CMN CM6.2 2.0
Metamorph Theme by Montalbert
First of all Thanks to OCM7 for such a stable build. Goto his thread and click the Thanks Button
And thank you for your permission for me to modify your rom.
Original thread found here:
http://forum.xda-developers.com/showthread.php?t=893637
Thanks to RaiderX303 for his clockwork mod.
This rom Uses Clockwork Recovery mod here, You must have it installed!!
http://forum.xda-developers.com/showthread.php?t=898913
PLEASE USE 150MB PARTITION WITH CLOCKWORK TO HAVE 100MB EXTRA SPACE OVER DEFAULT CLOCKWORK SETUP
Thanks to Montalbert for his amazing metamorph theme!!
All theming information can be found in Post #2 and is looked after by himself, please use the thanks button in post #2!!
Version 1.02 V2 is the stable variant.
Version 2.0 is experimental at this stage.
Changes:
CMN 2.0 V1 [Experimental]
Included gingerbread keyboard
FM radio working
Mic gain issues, will be repaired in v2
220 DPI
WIPE RECOMMENDED
OCM7's Official Changes
Custom built CM6.2.0RC optimized for the HD2.
Added LED Notification settings.
Button backlight settings and RMNET/PPP configurations in CM Settings.
Added Wifi MAC address fix in kernel.
new LED driver.
CMN 1.02 V2 [Stable]
Included Gingerbread Keyboard
Updated ringtones - Featuring the 30,000hz Ringtone
Changed boot animation
FM Radio Working (Confirmed Working)
220 DPI instead of 200 (modify build.prop yourself to change back)
Smoked Genie Widget (Transparent news widget)
Wifi Fixed
Converted to Clockwork Mod
You should be able to update with No Wipe if coming from CMN 1.02V1 (Old)
Click to expand...
Click to collapse
CyanogenMod 6.1 Desire based.
No Theme in Initial Rom. Theme is a Metamorph see Post #2 for details.
Whats Working [V1.02V2]:
Everything is working
Very Fast
Low Battery drain
Whats Working [V2.0]:
Everything is working
Very Fast
Higher Battery drain
Bug - High Mic Volume in phone calls
Click to expand...
Click to collapse
Installing Method:
If you are coming from another Clockwork rom, make sure you Wipe your device from within clockwork before flashing.
If you do not have clockwork recovery Click Here
Apply update.zip
Reboot and Enjoy
Do not restore application + data in mybackup/titanium for root applications. .Apk only or reinstall from market!! You have been warned
Tips:
Use Spare Parts to speed up window animations
Uncheck computability mode in Spare parts to allow apps to run Full Screen
If you dont get sync after entering your Gmail details, Reboot - Then Settings -> Accounts and Sync.
To apply Theme
Download Theme in Post #2
Click Thanks for Montalbert's work in Post #2
Download Metamorph from the market
Place the Morph theme in Androidthemes folder on your sdcard
Open Metamorph
Give Root access
Click Start Checks, It will close metamorph
Restart Metamorph, Click Start Checks.
Select Unzip/Extract new
Choose CMMOD_HD2
Then Apply each apk 1 by 1, Flash framework-res last. or Use Apply all but BEWARE OF DRAGONS.
After reboot
Settings -> CM Settings -> User Interface -> Tweak Extras -> Select Theme
Choose CMMOD_HD2
A further reboot is required.
Click to expand...
Click to collapse
FAQ
[Q] My [insert something here] doesnt work!
[A] Search the thread, its most likely has been fixed
[Q] I get robovoice!
[A] delete or rename /system/etc/firmware/default.acdb
[Q] My apps arent showing fullscreen!
[A] Menu-> Spare Parts -> Uncheck Compatability Mode -> Reboot
[Q]
thunerclaps said:
I flashed it successfully, applied the theme, but for some reason the text in notification table is still set as black, while the background changed to black. Any ideas to change it to teal?
Click to expand...
Click to collapse
[A] Use CM Settings
Settings -> CM Settings -> User Interface -> Tweak Extras -> Select Theme
Choose CMMOD_HD2
A reboot is required.
Click to expand...
Click to collapse
DOWNLOAD CMN V1.02 V2 [STABLE]: CLICK HERE - MIRROR
DOWNLOAD CMN v2.0 [EXPERIMENTAL]: CLICK HERE
Disclaimer:
1) You use this on your own free will, I nor OCM7 will take any responsibility for this breaking your phone.
2) I am not a developer, I repackaged OCM's rom and made a few changes.
3) Do not complain to OCM7 that something is not working in my kang!
4) Enjoy.
Click to expand...
Click to collapse
Credits:
Montalbert
OCM7
Hastarin
Rajko
Cotulla
LeTama
Cyanogen
etc.
Click to expand...
Click to collapse
reserved for theme information
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is my new theme- I have been using it myself on my Nexus One for a month or so now. I grabbed some images from a theme by JaiThemes (if you appreciate my work please buy one of his cheap themes on the market) and edited them to how I liked them. Then I combined in some of my own images plus some xml edits.
It is CMMOD flavour. It is still WIP and isn't a complete theme yet- only the main
So here it is- a metamorph- please use metamorph by Stericson from the market- makes theming so much easier. I have found that applying each apk one at a time is more reliable, and increasing metamorph delay in settings makes the whole morphing process a hell of a lot easier. To get the clock, notification text etc the correct colour, after applying all parts of the metamorph you need to go into CM Settings, then User interface, then tweaks extras and select this theme form the dropdown menu
MEDIAFIRE LINK:
CMMOD_HD2_Theme
Experimental v2.0
CMMOD_HD2_v2.0.zip
I have also done a CMMOD ADW theme- works well on ADW EX as well of course- although I think Anderwebs has changed the name of the folders so adding folders on EX will give a stock folder at this stage. The thing is I hate using my home screen landscape so haven't done any landscape images properly- that is planned
CMMOD_ADW
If you prefer a clear GenieWidget then here it is- still CMMOD flavoured.
CMMOD_HD2_ClearGenie
If you use Better Keyboard or Smart Keyboard Pro I also have a theme on the market for that:
CMMOD_SmartKeyboardPro_Theme
TNX man, great job ,
wold you update post 1 and put screen shot??
Screen shots of theme will be in post two later today. Main rom is stock ocm cm6 with some fix's
Sent from my HTC HD2 using XDA App
ill try it out...will report
Does this build have 65ma drain when bluetooth is turned on, like other CM build?
Jesus! Another one...Guys take some sleep or something! You surely drink to much cofee!
Thanks for the build! I will try it and report!
Thank you, for all the effort.
What about multi language support?? if you include arabic with right alignment, you will be the first to do it among all the available Nands..
good job ,
I'm flashed -250MB System-of recovery,copied files to SD root, launched updte from zip from this thread... And now it stuck when booting from NAND - I can see only blue Android with HTC quietly brilliant logo.
What I'm doing wrong?
thanks for the build.
but cant test it, because its in a rebooting loop.
have flashed the 250MB partition table too.
JMS32 said:
I'm flashed -250MB System-of recovery,copied files to SD root, launched updte from zip from this thread... And now it stuck when booting from NAND - I can see only blue Android with HTC quietly brilliant logo.
What I'm doing wrong?
Click to expand...
Click to collapse
Retransfer rom to phone.
If in clockwork it says copying System and this completes in around 3 seconds you have done something wrong or the zip has not transfered to sdcard correctly.
If that does not help
Task 29
Magldr 1.11
Flash recovery via DAF
transfer recovery files to SDcard
transfer rom to sdcard
run Clockwork Rom
Flash rom.
For more information on clockwork issues goto
http://forum.xda-developers.com/showthread.php?t=898913
I flashed it successfully, applied the theme, but for some reason the text in notification table is still set as black, while the background changed to black. Any ideas to change it to teal?
thunerclaps said:
I flashed it successfully, applied the theme, but for some reason the text in notification table is still set as black, while the background changed to black. Any ideas to change it to teal?
Click to expand...
Click to collapse
Use CM Settings
Settings -> CM Settings -> User Interface -> Tweak Extras -> Select Theme
Choose CMMOD_HD2
A reboot is required.
all settings are in the metamorph
did you apply the CMTheme part of the metamorph? After doing that you nee dto go into CM settings, UI, then tweaks extras then select a theme (CMMOD_HD2) and install the xml file from there
it has all the colours etc inside this file.
OP and MontAlbert ... your suggestions worked. Thanks. This ROM kicks ass.
I just flashed this ROM
And the market does not work after applying theme through metamorph. Damn it this is the first acceptable looking CM6 I have found. Any help? I will report speed when I can get a file manager installed. Is it possible to change the kernel if it is slow?
Ok market is back up
Can someone tell me,how is the battery drain in idle with BT on.
Thank u in advance
Sent from my HTC HD2 using XDA App
Having issues obtaining root with set CPU? Any suggestions
Sent from my HTC HD2 using XDA App
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4.2.0 - Data2Ext
Yes, it's old
But have no major issues, it's stable, it's fast, lasts for months
--- PLEASE READ POST 2 FOR UPDATED FAQ. IF YOU HAVE QUESTIONS OR ISSUES, MOST PROBABLY YOU WILL FIND THE ANSWER THERE WITHOUT NEEDING TO POST A NEW MESSAGE ---
Click to expand...
Click to collapse
BE ADVISED: THIS BUILD, CAUSE IT'S SIZE, WILL WORK ONLY WITH THIS METHOD OF DATA2EXT EXCEPT FOR 1024 LEO WHERE IT WORK WITHOUT IT: JUST DONT CREATE ANY EXT PARTITION ON YOUR SDCARD AND IT WILL NOT BE USED. IF YOU PUT AN EXT PARTITION WILL BE AUTOMATICALLY USED ON BOOT
========================= THEMED VERSIONS! =========================
ARE YOU LOOKING FOR THEMED VERSIONS??? GO ON POST 4 OR click here
Check Quadrand Score! Ext3 4k with my kernel
NO OC = 2236 ------- [email protected] 1.5 GHZ = 3041!!!
---------
Stock Version and Themed version RAFDROID REVOLUTION videos by kevinniven
This is a personal build made for my self, based on DESIRE HD. Is 99% stock, % battery indicator and some animations/icons. It's fully DEODEXED so you can theme it as you want. Also if it's a bit slower then ODEXED builds. I tried also to keep most of the apps, wallpapers and other stuff in it. But most important it uses to put all your DATA folder on EXT partition on your SD CARDso you dont have to worry about storage limite on LEO512
Credits:
-Cotulla and DFT for making all this possible, darkstone for his big help, the coding bits, the debug and the hours spent helping me
-andrewf403, mdeejay for the kernel, Rajko, crawling, ocm, Cass, cedesmith, domineus, imilka, rmk40 for the modded su app/bin
-dandiest for some parts of his init script that I changed to my needs.
Thanks to all people on #htc-linux and probably a lot of other people I'm forgetting and to the TMOUS version betatesters: tampaboy1984, hkmark24, Scabes24, rapaholic999, kicker1, fatappel
Thanks to Cmylxgo, Sergio76 and all other chefs that spent with me some times of nice chats and knowledge sharing
Thanks to 3.0 testers: kkeller, brunoavrocha, edan1979, tunkki
Thanks to the themers: kurniawan77, dandsta34, rapaholic999
and a last big thanks again to kurniawan77 for his amazing graphic, logos, texts and the theme support
============ FEATURES ============
Deodexed and Zipaligned, not sqashfsed
RMNET / PPP
Multilanguage
Rooted (SU app + SU binaries)
AdFree
AutoAPNs
5mpx camera with face recognition + 800*400 camcorder
HSDPA, GPS, Bluethoot, WiFi all working
% battery icon and status bar icons changed (use original framework-res.apk to go back to stock attached in 2nd post)
fonts changed (use original fonts to go back to stock attached in 2nd post)
Enhanced Shutdown Menu
WiFi unique MAC address or custom via config.txt
Working HTC-SENSE.COM, HTC-HUB, HTC-LIKES
Working HTC Headsets using my kernel
Working notification LEDs
Working Streaming Video
Working Flash Player, No more browser crash
Support config.txt to tweak boot options
Modified shutdown android process to cleanly unmount data partition and avoid data corruption.
Fast, Fast, FAST!
Removed to fit in the 400mb system partition(you can download from market or use update zip in post #2)
AdobeReader.apk
Facebook.apk
GoogleMaps.apk
Quickoffice.apk
SoundHound_freemium.apk
Street.apk
Talk.apk
Twitter.apk
VoiceCommander.apk
YouTube.apk
============ WHAT IS WORKING ============
Everything except stock HTC Reader (removed)
============ WHAT IS NOT WORKING ============
No photo sharing in camera app
If you choose to use a custom wifi mac, gps will not work.
============ CHANGELOG ============
Code:
[SIZE=2]4.2.0 - 07 AUG 11
I THINK THIS WILL MOSTLY BE THE LAST RELEASE OF THIS ROM
- Updated GPS libs (credits: tytung)
- Tweaked ril data (credits: jan-williem)
- Otpimized again all apks to improve speed
- Updated ad-free hosts
- Updated Market, Gmail, Flashplayer
- Fixed some typo in some part of codes
4.0.2 - 10 MAR 11
Reverted the weather fix. If you weather doesnt work apply the fix in post 2
4.0.1 - 9 MAR 11
Reverted to radio drivers from 3.2 for better data stability
Fixed a typo in init causing some issues with data and booting
Fixed some drivers dependencies
Fixed PPP: working again
Included WeatherSync fix
Reverted to camera app with working preview
Some fixes on some parts of the system to improve stability and speed.
Some other small fixes
4.0 - 6.MAR.11
New base TELUS 1.84.661.1
new kernel rafpigna 1.8 OC
updated gmail
updated market
updated flash player so you will have no more erros
modified camera app: disabled review to not show the "share" menu (credit cmylxgo)
updated busybox to 1.18 stable
added custom wifi possibility
added ppp possibility again using a separate radio lib to not "touch" the rmnet radio lib so battery drain will not be affected.
modified init and init.log to have better debug informations
zip align of all apps on boot to improve speed, ram, and battery drain
updated some driver and libs for better stability
updated all languages including Serbian and handwriting languages
MMS sizes 300kb, 600kb, 1024kb (default 300kb, choose size in the sms settings)
reduced freeze a bit when installing apps from the market
some other small fixes and tweaks I forgot
3.2 - 25.FEB.11
Some improvements and fixes to radio/audio driver,
this "should" fix phone freeze in some setups, also if I was not able to replicate the issues
Tweaked for more battery life on some sd cards usage
Updated hosts file with last one
3.1
New boot screen, thanks to [/SIZE]ddeathmetal
[SIZE=2]Added more languages
Tweaked again mmc read-ahead to improve sd-card speed
Automatic zipalign on boot for better ram usage
Reverted to old radio driver for less battery drain and improved data stability (no more PPP possible, only RMNET)
Now possible to use old light driver and disable button backligh directly in config.txt
Improved stability of data2ext
More info on init.log for debugging
Other small fixes and tweaks
3.0
Dropped the old 1.72 base and started from scratch new official RUU HTC 1.72 Desire HD Base
Correctly Deodexed framework and apps (took me 1 day of work)
Updated some drivers and a lot of libs
G-Sensor calibration fix
Included TMOUS MMS FIX: 300kb, 600kb, 1024kb mms size available in the sms settings. 300kb as default.
Included Video Streaming Fix by ownhere
Patched sql_lite libs
Reduced again lag/freeze when installing apps.
Reduced boot time. On the first boot you can unlock the screen after 30 seconds you see the lockscreen, without any lag
Re-added VR libraries
Updated AdsFree hosts file
Fixed HTC Hub / HTC likes :D
Fixed HTC Navigation ;)
Added boot config.txt to switch between ppp and rmnet
Sd_boost mode available
My own custom initrd with Improved Sd-EXT I/O performance and Improved SD-EXT read-ahead performance
Improved Nand read-ahead performance
Working HTC Headest with included kernel
Modified shutdown android system process to cleanly unmount data partition and avoid data corruption
Working notifications led
Button backlight on when screen on
A lot of other cleanups and tweaks that I cant remember.
Removed, to save space (you can download from market)
AdobeReader.apk
Facebook.apk
GoogleMaps.apk
Quickoffice.apk
Street.apk
Talk.apk
Twitter.apk
VoiceSearch.apk
YouTube.apk
2.3
Patched sql lib to improve I/O speed and disk usage (credits to nowhere)
Patched ext mount options to dramatically improve I/O speed when using EXT3/EXT4 for data
Patched htcleo.acdb for louder volume. You will still have robo audio on first call. Check FAQ to avoid it.
Added e2fs tools in bin
Small cleanups
2.2
Merged 512 and 1024 versions, changing the init to use internal nand storage if non EXT partition is found
AutoApns fixed for most of the countries.
Fixed charging while screen off
Fixed "system not responding" during boot -> this will give you robovoice audio at first call. To avoid it disable touch tones before first call or enable then disable speaker during the first call.
Improved boot speed
Improved app installation speed -> less lag!
Some cleanups
Latest kernel MDJ 10.3 OC for improved performance
2.1
Fixed SU (read bug reporting on post 3)
Changed from data.img support to Data to Ext4
Working USB Mass storage mode
Patched version for TMOUS users with MMS fix and no data2Ext
Latest MDJ Kernel 10.2 OC
2.0
New base Desire HD 1.72.405.3
RMNET
Rooted (su + Superuser APP)
Bootanimation changed
Bootsound changed (very very low, just a "beep")
Auto APN
AdsFree (updated)
New Advanced Power menu (credit to reef2009)
New initrd/data2sd system (credit to Takaaki.Takuno)
some minor tweaks & fixes
1.0 - Initial Release
Based on RUU 1.32.405.6
Removed HTC E-Reader
Removed SoundHound
Removed AmazonMP3
[/SIZE]
Click to expand...
Click to collapse
=== INSTALL INSTRUCTIONS (CWR) - NEW USERS WITHOUT CWR INSTALLED OR WITH CWR BUT USING ANOTHER ROM ===
This process will erase everything on your nand. So, if you are already using a previous rom, backup everything!
Suggested but not mandatory: Download PANASONIC SD FORMATTER and use it to format your card with SLOW ERASE
Prepare your SD Card with first partition primary FAT32. This is where you will put all your stuff like music, videos... so make it bigger as possible less the space for the EXT partition. Ext partition must be EXT3 or EXT4, primary, and must be the second partition of the SD card, just after the FAT32. The EXT partition will be seen from your phone as it's internal storage memory. Maximum 1gb EXT is suggested, bigger one can cause issues. Refer to this for an help to make the partitions http://forum.xda-developers.com/showthread.php?p=10654666#post10654666(only ext3) or use this for ext 4 http://forum.xda-developers.com/showthread.php?t=905089
After the partition are created, you need to flash MAGDLR 1.13 and the 400mb Recovery for MAGDLR that you can find here http://forum.xda-developers.com/showthread.php?t=898913 follow the instructions on the thread
Download the FULL RAFDROID PACKAGE and copy the entire zip (not extracted!) on the SD CARD root.
Put the SD CARD in your phone and power it on and go in the MAGDLR menu (hold the power key while powering up)
Select BOOT AD RECOVERY
Click on INSTALL ZIP FROM SD CARD and then CHOOSE ZIP FROM SD CARD
Select the FULL_RAFDROID_HD_EXT_*r*.zip that you downloaded before.
Select "Yes - Install........" and wait for installation then Go back with power button and select REBOOT SYSTEM NOW
First boot can take up to 20 minutes. If you are stuck on white screen with HTC logo just wait. If you hear boot sound more than one time, you had a bootlop and something has gone wrong. Maybe your partitions are not setted up properly. Delete everything, reformat your SD card and try again.
When you see the lockscreen, give at least 5 minutes to settle. Then do all your settings and then reboot again
Go in Settings -> Audio -> Disable "audible touch tones". This will avoid robo voice and phone freezes.
Read the FAQ on post #2
Enjoy.
Remember: if you want to avoid Data Corruption always choose SHUT OFF and not reboot!
TOO DIFFICULT?? HERE A VIDEO TUTORIAL!!! BY ACLERIGO!
=== INSTALL INSTRUCTIONS (CWR) - UPGRADING FROM A PREVIOUS RAFDROID VERSION WITH ALREADY CWR INSTALLED===
Since 4.0 is completely new base and a lot of bugs are fixed, I suggest to backup your apps with Titanium Backup or another backup app, format your ext3 partition and start fresh. If you prefer to keep your old data partition please understand that you could have bugs, instability, slowness, and some bugs that are fixed will remain not fixed for you.
It's your choiche, if you still want to keep your data partition, instructions below:
Make a NANDROID Backup
Make a NANDROID Backup... go on!
Make a NANDROID Backup... really!!!!
did you made the backup?
You need MAGDLR 1.13 and recovery 1.3. If you have previous version, you need to flash MAGDLR 1.13 and the 400mb Recovery for MAGDLR that you can find here http://forum.xda-developers.com/showthread.php?t=898913 follow the instructions on the thread. Old CWR is NOT compatible!!!
Download the RAFDROID_HD_EXT zip and save it to your SD card root
Enter in MAGDLR by powering up the phone and holding power botton until MAGLDR screen appears and Enter in CWR Recovery by selecting BOOT AD RECOVERY
Select INSTALL ZIP FROM SD CARD then CHOOSE ZIP FROM SD CARD
Select the RAFDROID_HD_EXT zip that you downloaded before.
Select "Yes - Install........" and wait for installation
Go back with power button and select REBOOT SYSTEM NOW
First boot can take up to 20 minutes. If you are stuck on white screen with HTC logo just wait. If you hear boot sound more than one time, you had a bootlop and something has gone wrong. Maybe your partitions are not setted up properly. Delete everything, reformat your SD card and try again.
When you see the lockscreen, give at least 5 minutes to settle then do all your settings and then reboot again
Go in Settings -> Audio -> Disable "audible touch tones". This will avoid robo voice and phone freezes.
Read the FAQs on post #2
Enjoy.
Remember: if you want to avoid Data Corruption always choose SHUT OFF and not reboot!
============ CONFIG.TXT ============
Used some ideas and code bits from Dandiest's init script.
You can create a config.txt file on the root of your sdcard to configure some things at boot.
Actually you can configure the following options
gps_zone=[your country]
check http://www.pool.ntp.org/zone/@ for country codes (example: it for italy, us for usa.. and so on...)
sd_boost
sd_boost=0 -> sd bost not active (default)
sd_boost=1 -> sd boost active
* SD Boost deactivate journal on your ext partition. This gives you more performance but if you not shut off your phone properly or you pull out the battery while running you can have data loss or data corruption. If you activate sd boost, then you want to go back to norma sd usage, just change the config.txt back to sd_boost=0 and journal will be recreated on next boot *
ppp_mode=[1 or 0]
1 to enable PPP
0 to enable RMNET.
Default is 0
RMNET is more stable and less battery hungry, but in some countries/carries PPP can work better.
old_light_driver=[1 or 0]
0 to use the new light driver (working notification leds, button backlight control)
1 to use the old light driver (no notifications leds, buttons will go off after 10 seconds)
default is 0
auto_btn_backlight=[1 or 0]
1 to have the buttons backlight going off/on with the screen
0 to have the buttons backlight going off after 10 seconds from when the last button is pressed
default is 1
this work only if old_light_driver=0
wifi_mac_change=[1 or 0]
1 tells the system that you will need to change the wifi mac address to a custom one
0 tells the system that you will use the wifi mac address based on device hardware
custom_wifi_mac=yy:yy:yy:yy:yy:yy
here you have to write the wifi mac address you want.
This is needed, and will work, only if you specify wifi_mac_change=1
If you not write any mac address here, the default 00:11:22:33:44:55 will be used
Just an example on how a file could look:
Code:
gps_zone=it
ppp_mode=0
old_light_driver=0
auto_btn_backlight=1
The init script will also create an init.log file on your sd card at every boot. This will help you and me with debugging if something not works fine. If you have issues please always post your init.log file when reporting your problem.
Click to expand...
Click to collapse
============ KERNEL ============
You can refer to my kernel thread for updates, changelog, and comments
http://forum.xda-developers.com/showthread.php?t=940823
Click to expand...
Click to collapse
DOWNLOADS
Click to expand...
Click to collapse
4.X is bigger then 2.X so you need at least a 390mb system partition. If you flashed the recovery with 360mb modded file, you have to reflash it again, or you will have issues at boot!!!
Remember: if you want to avoid Data Corruption always choose SHUT OFF and not reboot!
Full zip:
ALWAYS MAKE A CWR NANDROID BACKUP BEFORE FLASHING!
FRESH INSTALL RECCOMENDED (format ext3 partition or factory reset nand)
Please, if you respect my work, dont upload this file on any other mirror or host, always put the original link in any forum or web page where you are going to post it.
RAFDROID HD 4.2.0 CWR FULL zip -> DOWNLOAD HERE
MD5: FD92F05F19F93472758431A6E9693F17
SHA1: AC36D7F8A3930F4AE53514CE0FC363E8BC323F46
CRC32: 16E8C321
Update zip:
NO UPDATE ZIP FROM 4.0.2 TO 4.2.0 AVAILABLE. USE THE FULL ZIP, IT WILL NOT ERASE YOUR DATA OR SETTINGS.
OLD VERSIONS:
RAFDROID HD 4.0.2 EXT FULL http://www.multiupload.com/RP3B4LX68X
RAFDROID HD 4.0.2 EXT UPDATE FROM 4.0.1 http://www.multiupload.com/DCC78Q8CRK
RAFDROID HD 4.0.1 EXT FULL http://www.multiupload.com/PX886QUD3G
RAFDROID HD 4.0.1 EXT UPDATE FROM 4.0 http://www.multiupload.com/UR8MSZNZY1
RAFDROID HD 4.0 EXT FULL http://www.multiupload.com/8RK24UHUC1
RAFDROID HD 3.2 EXT FULL http://www.multiupload.com/I13LGA4CWA
RAFDROID HD 3.2 EXT UPGRADE FROM 3.1 http://www.multiupload.com/EI95P7SZVK
RAFDROID HD 3.1 DATA2EXT FULL -> http://www.multiupload.com/NGAZIAYWY2
RAFDROID HD 3.1 DATA2EXT UPGRADE FROM 3.0 -> http://www.multiupload.com/F2MS80I7BI
RAFDROID HD 3.0 DATA2EXT FULL/UPGRADE -> http://www.multiupload.com/YGWCQAV5BZ
DONATE:
Click to expand...
Click to collapse
I'm putting a lot of time in this, nights without sleeping, downloading, flashing, reflashing..So, if you like my work and appreciate it, and you want to buy me a coffe or a beer for chilling out, I will appreciate it you can do this here
otherwise a click on the "thanks" button is still a good idea
(if you have issues donating, you can try this link too: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=5QAZTXDRDKLS8
- BUGS REPORTED -
- Video recording makes videos and audio out of sync. This is a common issue of all Desire HD bulds. can't do nothing to fix
----------------------------------------------------------------------
TO DO LIST (next releases)
Add support for CWM zip file. DONE!
Add support for config.txt file to change gps location, dpi, and other stuff DONE!
Add PPP/RMNET choiche via config.txt DONE!
Test ext3 and ext2 to see if they have more speed. Test if ext4 journaled fs can be disabled TESTED! ext3 is faster. 4kb cluster suggested.
Add a full themed version DONE
UPDATES AND PATCHES
to be flashed via recovery
Click to expand...
Click to collapse
Instructions:
1. Download your update and copy it to your sd card folder. Dont use MAGDLR mass storage mode because will corrupt your files. Use an sd card reader on your pc or usb mass storage mode in recovery menu
1. Boot into MAGDLR and choose BOOT AD RECOVERY
2. Make a backup! It will save your life if something goes wrong and you want to roll back! You are aware now!
3. Click on INSTALL ZIP FROM SD CARD
4. Click on CHOOSE ZIP FROM SD CARD
5. Select the update zip that you downloaded before
6. Select "Yes - Install........" and wait for installation
7. Go back with power button and select REBOOT SYSTEM NOW
Stock Framework (notification bar icons) for 4.X version -> http://www.multiupload.com/R61RSZCZ8N
Rafdroid Framework (notification bar icons) for 4.X version -> http://www.multiupload.com/XR3QBDCK09
old acdb file (read the faq if you dont know what this is) -> http://www.multiupload.com/AHV0UIKHZF
Rafdroid 4.X removed apps for EXT users -> http://www.multiupload.com/MV9D2ITBZX
Rafdroid 4.X removed apps for who not use EXT partition -> http://www.multiupload.com/TP55AT18PL
Replacing fonts with standard Desire HD one http://www.multiupload.com/N4VR74W8PK
Replacing fonts with Rafdroid one http://www.multiupload.com/E9UKQBEE4P
If you have issues with flash videos on website, you need an older flash version. Check this post. Thanks to Jayedamina http://forum.xda-developers.com/showpost.php?p=10584806&postcount=280
If you have issues with weather not updating on 4.X , flash this -> http://www.multiupload.com/8YOYX0P5UE credit to CMYLXGO
Only for older version
Stock Framework, only for version 3.X -> http://www.multiupload.com/SI2VXOW3D0
RAFDROID Framework, only for version 3.X -> http://www.multiupload.com/ZC4P6KSKWL
Removed Apps for version 3.X for people using EXT partition -> http://www.multiupload.com/O6SYWQBDJG
Removed Apps for version 3.X for people NOT using ext partition -> http://www.multiupload.com/FVXAWDOQLR
[only for 2.2 or 2.3] Fix for SPB TV and other video straming apps (v2) http://www.multiupload.com/VB0MB5R6RL Credits goes to ownhere! -> http://forum.xda-developers.com/showthread.php?t=922595
[only for 2.2 or 2.3] Fix for Camcorder ForceClose on rapaholic999 theme http://www.multiupload.com/TTQOHSG155
Stock Framework, only for versions 2.0, 2.1, 2.2, 2.3 http://www.multiupload.com/ZV310PPYB4
RAFDROID Framework , only for versions 2.0, 2.1, 2.2, 2.3 http://www.multiupload.com/NO9L7W9JVD
FAQ - QUESTIONS and BUG FIXES
PLEASE READ
Click to expand...
Click to collapse
q) My phone sometimes freeze and I have to reboot.
a) Go in Settings -> Audio -> disable audible touch tones. this will solve the issue in most of the cases.
q) Can you provide a different link or a mirror different from hotfile?
a) I'm sorry but the answer is "no". I pay hotfile every month and the downloads give me the possibility to pay it. I dont do this for money, but I also dont want to waste my money
q) During/after boot a window appears with "System process not respoding". What I have to do?
a) This is caused from the new audio driver I used. The new audio driver has better phone stability and no robo voice. You have two choices: 1) Click on "wait" and all will be fine OR 2) download the "old_acdb_file.zip" and flash it via recovery. In this way you will not have the error anymore but you will start having robo voice on first call (you can avoid this disabling audible touch tones) and could happen that your phone freezes when receiving a call. It's your choiche. I preferred the "window error" one because for me is more important to have a working phone than an error window appearing at boot.
q) After I take a photo, I dotn see the "review"
a) This is caused from the new HTC Camera app I used that disables the review to not show the "sharing" menu that ForceCloses. If you cannot live with that until next update, you can use that one http://forum.xda-developers.com/showthread.php?t=981881
q) What is the difference between Data2Ext and App2SD?
a) App2SD simply move all your apps that you install in the Ext partition. Data2Ext instead "mounts" your data folder, including dalvik cache, on the ext partition. This is a little slower than App2SD but it's necessary for a Desire Hd full build. Infact, installing a full HD build will left you with only 5mb of free space in internal storage.
q) I have robo voice when I make a call
a) To avoid this, disable "audible touch tones" from the "settings -> audio" menu. You will have no-more robo voice also if you reboot.
a) During the robo-voice call, enable the speaker, then disable it. You will have no more robo-voice until next reboot.
q) I have very low audio during calls
a) During the call, enable the speaker, then disable it. You will have loud volume until next reboot.
q) after boot I see only a white screen with a green htc logo
a) just wait. It can take fro 5 up to 20 minutes depending on your sd card. There are no issue. The build booted fine, it's just copying all the files to SD. This will happen only on first installation.
q) During the boot I see an error windows "System not responding" what I have to do?
a) This could be caused by slow sd card. Just click on "wait" and all will works fine
q) I already have a ext partition that was running under another rom, how can I empty it so that I can cleany flash your rom?
a) Just use one of the tool you used to create the ext partition to format it or to delete and recreate it back.
q) I'm having high battery drain
a) Try reboot. Try disabling gps in location. As you can see from the screenshot I have 4mA with WIFI active! Also be careful. If during google account setup you choose to backup/restore all your data, the sync process will be dramatic heavy because it has to reinstall all your apps. It could need a couple of hours to settle. Also high battery drain could be caused by SD. try another one.
q) It's really laggy!!!!
a) as all Desire HD builds this is BIG! This needs at least 10-15 minutes after boot to be usable. Then try to use it for 5-6 hours.. and do a couple of reboots.. you will see that the speed will improve. After 24 hours of use and 4-5 rebots this will be really fast.
q) It lags when I'll install apps?
a) very few..
q) I have no GPS or the fix is really slow
a) Firs fixt can take up to 5 minutes. just wait.You can edit the config.txt gps_zone= to your country. See here for the right strings http://www.pool.ntp.org/zone/@ if this not solves, try use QuickGps from the market to download a-gps data.
q) I have low quadrant scores when using on full nand (no ext-partition) compared when used with SD!!!
a) yes, this is true. I made some tweaks to the full sd mount and use process that raise the quadrant i/o score. Anyway, also if quadrant is lower on full nand, you daily usage speed is the same or in some cases FASTER.
q) Can I unmount the SD while in use or connect the phone as mass storage to my pc while in use
a) Best not. Is unuseful. You can access your sd card connecting your phone to pc and using "mass storage" option.
q) It not boots
a) partition again and format again your sd card. follow the guide linked in the first post.
q) I have no data/3G/HSDPA
a) probably you have to set your apn manually. google it for tips on how to do and what settings are need for your carrier
q) How do I remove BOOTSOUND / How do I change bootanim
a) bootsound and bootanim are located in /system/customize/resource
Just delete android_audio.mp3 if you dont want sound
q) I have wake up lag
a) It's an issue that devs are trying to solve. It's not related to the build itself. In the Q&A Forum there is a thread about this problem. HERE, HERE,....
q) My screen stays off after call
a) Maybe this can help: http://forum.xda-developers.com/showthread.php?t=946012 ATM very few people have this issue, so I wonder is related to sd card.
q) My contacts pictures are low res after sync!
a) this is a google problem, read here http://code.google.com/p/android/issues/detail?id=4147
q) My Weather doesn't update
a) seems an issue of 1.84 builds. Try to flash this via CWR http://www.multiupload.com/8YOYX0P5UE credit to CMYLXGO
q) I have random reboots
a) Seems to be related to your phone, read here http://forum.xda-developers.com/showthread.php?t=941845 and here http://forum.xda-developers.com/showthread.php?t=898804
q) Can I disable the button light always on with screen on to the "previous" way that they go off after a while?
a) yes, changing config.txt Read the OP.
......................
More Screenshot's:
http://goo.gl/JdqB6
What's included:
- rEVOlution theme by manup456 and he_stheone64, all credits to them!! Ported and modded by me
- Semi transparent StatusBar, NotificationBar, NavBar, AppDrawer, Personalize
- 1% BatteryGauge
- Modded StatusBar Icons
- AppDrawer 5 Column layout
- Inverted Dialers
- PowerControlWidgets in NotificationBar
- Remapped Personalize to LaunchKey app (by appelflap) (bottomright softkey)
changelog rev3:
- Compatible only from RafDroid 4.0! and above
- RafDroid_rEVOlution on SteriodZ is now the default theme, look in the options list below for other or less options (SOON)
- Rebuilded from stock framework 1.84.661.1 including services.jar and framework.jar by me
- Remapped rosie for 1.84(personalize) to LaunchKey app (appelflap) by me
- Removed the text under icons on workspace (home). Nice clean look!
- Removed "Phone" text on navbar... Placed a better looking phone icon thanks to myn.
- Modified the lockscreen arc to look better on darker backgrounds, looks better too imo...
- Modified the lockscreen hint background
- Edited Dialer text to slightly darker green
- Modified Dialer pads
- PowerControl indicator colour hardcoded to green
- Nicer background for PowerControl widgets
- Included latest PowerControlSettings 1.1 app by JsChiSurf
- My own home made WheatherClock widget
- Hacked the flipclock to be disabled by me
- Wallpaper added (Don't worry, Megan still there...)
changelog rev2:
- png optimized and zipaligned for better memory handling
- rebuilded from stock framework 1.72.405.3
- new lockscreen and incall slider made by me
- replaced some panel pop up's made by me
- smooth charging animation on battery gauge
- added Flying transitions
- nice volume icons specially made for me by Madeli
- particles1 Bootanimation by Dysgenic
- edited statusbar_close to rafdroid hd2
- reverted some icons back to stock DHD, you wouldn't notice...
- Powerwidgets AND Recent apps on notification pulldown
- replaced powercontrol notification icons specially made by Madeli... she's awesome!! Power off icons were modded by me... hope she don't mind...
PowerControlWidgets
Hardcoded on default, widgets: toggleGPS|toggleWifi|toggleBluetooth|toggleSync|toggleFlashlight|toggleSound
I have hardcoded the powercontrolwidgets so after flash it is all done. U still can override these settings by applying the following:
- Customizable via a text file widget.txt (max.6) to change widgets.
Find included 'widget.txt' on root of SDcard. Modify to your likings but DON'T use spaces or delete the pipeline signs. Use Rootexplorer to copy this file to '/system/customize/'. Make sure permissions are set to 'read', at a minimum after copying! Then power off and on.
- available widgets:
toggleAirplane
toggleAutoRotate
toggleBluetooth
toggleBrightness
toggleFlashlight
toggleGPS
toggleLockScreen
toggleMobileData
toggleScreenTimeout
toggleSleepMode
toggleSound
toggleSync
toggleWifi
toggleWimax
Have in mind that u have to use the exact syntax!
Enable or disable PowerControlWidget
Hardcoded to have both PowerControl and RecentApps on default. U still can override these settings by applying the following:
- Find included 'notification_config.txt' on root of SDcard. Modify to your likings but DON'T use spaces or delete the pipeline signs. Use Rootexplorer to copy this file to '/system/customize/'. Make sure permissions are set to 'read', at a minimum after copying! Then power off and on.
- Available options:
Default = enablePowerControl|enableRecentApps
PowerControl only = enablePowerControl
RecentApps only = enableRecentApps
Remapped Personalize
Personalize softkey is remapped by default to LaunchKey app by appelflap. You can set it to launch an app, service or a nice launcher menu. Personally i have setted to Settings... More info here: http://forum.xda-developers.com/showthread.php?t=818499, or buy it on the market to get more options.
If you don't want it to be remapped, you can have a look in the options list below to apply. (SOON)
Install RafDroid_rEVOlution:
- Download .zip to sdcard
- Boot ClockWork Recovery
- Before installing the Theme...
- Backup Nand!!!
- Install .zip from sdcard
- Theme will install and wipe Dalvik-cache (next boot will take more time and will be sluggish)
- Reboot sytem, let it settle for a while
- Power off and on again
Download RafDroid_rEVOlution rev3:
Click Here
OptionsList
Click to expand...
Click to collapse
I can't please everyone but at least i can give some options to choose from...
Before applying these options, you must have the main theme(see above) running first!!! After that, you can choose whatever options you like, no matter which one...
What options do i have
- Steriods: This will give u the PowerControl in notificationbar, PowerControlSettings app and Personalize softkey (bottom right) remapped to LaunchKey app - rEVOlution: Simply NO Steriods... just plain and natural
- Text/ NoText: Visibility of the text under the icons on your workspace (home)
- 4/ 5 column: App drawer (All Apps) layout
HowTo Install:
- Download .zip to sdcard
- Boot ClockWork Recovery
- Before installing the Theme...
- Backup Nand!!!
- Install .zip from sdcard
- Option will install, make some modifications and wipe Dalvik-cache (next boot will take more time and will be sluggish)
- Reboot system, let it settle for a while
- Power off and on again
Downloads
Steriods_NoText_4column
Steriods_NoText_5column
Steriods_Text_4column
Steriods_Text_5column
rEVOlution_NoText_4column
rEVOlution_NoText_5column
rEVOlution_Text_4column
rEVOlution_Text_5column
And if you really don't like it.....
Revert to RafDroid
YouTube
Click to expand...
Click to collapse
Video's made by kevinniven
Video made by aclerigo
Credits
Click to expand...
Click to collapse
All Credits goes to he_stheone64, he made this possible. manup456, the real rEVOlutionER. Appelflap for his great LaunchKey app.
rafpigna for the greatest DHD build.
JsChiSurf... YOU r the MAN!
rapaholic999... keep up the good work my friend, too bad someone stolen your HD2.
Madeli... nice work lady, u have no idea how happy u made me, luv ya!
To the donaters and downloaders... you know who u r
My girlfriend and kids.... for having so much patience...
And XDA.... Thanks!
You may donate me but at least push the thanks button, it's a hell of a work, and it's not only swapping .png's.....
Rafdroid HD Xtreme
by By dansta34
http://forum.xda-developers.com/showpost.php?p=11170313&postcount=2002
thanks rafpigna
tonight will be a busy night
thanks for ur build
Are there in this build laggs when i install or uninstall an app ???
seavers11 said:
Are there in this build laggs when i install or uninstall an app ???
Click to expand...
Click to collapse
Aw Come On!
RTFM would you ... It's all stated in the FAQ, should you just bother to give it a read!
The threat will quickly closter if people keep asking questions already answered, and even faster when people starts getting cross about it, so I'll just shut up now.
waiting for your release..
now lets wait for the link to update and test it before saying anything... there is no easy way in life...
when release this man????
good job and thanks rafpigna !
i'll try this rom and i also like your Fonts !
10 PEOPLE REACHED. NO MORE BETA TESTER NEEDED. THANKS
TESTERS NEEDED
Before uploading the TMOUS version I needs to check that it works fine at least for the no "data2sd" thing. Unfortunately having a 512LEO I cannot test my self.
So please, anyone has a 1024 LEO and want to be a betatester send me a PM. I will send the link to the first 10 people. You will have to flash it and let me know if it works.
Be advised: since this is a beta test request, could happen also that you have to reflash back a supposed working version after a couple of hours.. so I need people that will not give up after a one not working flash.
I will write in this threa again when 10 people are reached and no more requests accepted.
All the testers will be thanked in the OP.
Hi I have a ext4 partitio that was running under revolution 2.3, how can I empty it so that I can flash a clean flash of your rom?
Thanks
nickytheshaft said:
Hi I have a ext4 partitio that was running under revolution 2.3, how can I empty it so that I can flash a clean flash of your rom?
Thanks
Click to expand...
Click to collapse
Just use one of the tool to create the ext partition to format it or to delete and recreate it back.
ok thanks, I thaught it was possible from the phone...
beta tester
rafpigna said:
TESTERS NEEDED
Before uploading the TMOUS version I needs to check that it works fine at least for the no "data2sd" thing. Unfortunately having a 512LEO I cannot test my self.
So please, anyone has a 1024 LEO and want to be a betatester send me a PM. I will send the link to the first 10 people. You will have to flash it and let me know if it works.
Be advised: since this is a beta test request, could happen also that you have to reflash back a supposed working version after a couple of hours.. so I need people that will not give up after a one not working flash.
I will write in this threa again when 10 people are reached and no more requests accepted.
All the testers will be thanked in the OP.
Click to expand...
Click to collapse
im willing to give it a shot im advanced user
Could I move some app to rom from ext4? How to do that?
rafpigna said:
TESTERS NEEDED
Before uploading the TMOUS version I needs to check that it works fine at least for the no "data2sd" thing. Unfortunately having a 512LEO I cannot test my self.
So please, anyone has a 1024 LEO and want to be a betatester send me a PM. I will send the link to the first 10 people. You will have to flash it and let me know if it works.
Be advised: since this is a beta test request, could happen also that you have to reflash back a supposed working version after a couple of hours.. so I need people that will not give up after a one not working flash.
I will write in this threa again when 10 people are reached and no more requests accepted.
All the testers will be thanked in the OP.
Click to expand...
Click to collapse
I will be your tester.
AngelDeath Presents: TMOUS & EU Kingdom Sense Rom V1.5 FINAL!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Based on Kingdom WWE 0.81.651.0 Kernel: TyTung R10 with patches from everywhere.
Thanks and Credits to the following Chefs/Creators/Dev's: DungPhp, Derek, Imilka, Cmylxgo, The RCMix Team, Capychimp, i00, TyTung, Virtuous, SeoThanks to the following Testers: JHR5474, TheGeorgiaSwagger, Kameirus.Thanks to Carl1961 for helping with the Logo.
The ROM has been a long and Painstaking process of trying to stablize it ever since it came out, and after countless hours, sleepless night, endless testing, forever flashing, constantly patching, and alot of cursing, here is my version of "Kingdom".
What Works:
Just About Everything!
What Doesnt work:
CamCorder (Use a 3rd Party)
Anything Else, You'll Let me know.
Whats Been Removed:
Any app that can be downloaded from Market
All Sample JPGs to save room.
What has glitches but works: (Explained Later Below)
Bluetooth
Whats been Added:
TyTung GPS Lib 1.8 (NEW)
My GPS File North America & Europe.
WIFI scan has been increased to 4min scan intervals to save battery.
Suggestions:
NONE
Glitches Explained
Bluetooth Pairing: To get Bluetooth to work, go into Bluetooth, turn on bluetooth, put headset or device into pairing mode. Then Tap Scan for Devices, then tap Discoverable (Making the HD2 discoverable) the device will be found and paired and working. If you disconnect a paired bluetooth or turn off bluetooth, to re-connect, turn bluetooth on, then tap discoverable, then tap the device you want to re-connect to. Its a PITA but it works!
CWR Partition Needed EU: NEW CWR 01.July.2011
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 8M
system ya 216M (Recommended 220)
cache ya 8M (Recommended 16)
userdata ya|asize|hr allsize
CWR Partition Needed TMOUS
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 8M
system ya 400M
cache ya 8M (Recommended 16)
userdata ya|asize|hr allsize
Works for me.
How to prepare your Phone for this rom if you are coming from another rom using the same CWR Layout (If you Flash a new CWR Partition you can skip this step):
In CWR go to Mount & Storage, and Manually format each section:
Format Boot, Cache, Data, System, then go to advanced and then wipe dalvik cache. once you do that, then you can flash the rom. I have made it that it formats boot, data, and system before flashing, but its an extra precaution, especially for EU users.
EXTRA NOTATION:
As I said in the FAQ, you can try different partition sizes, but any problems that occur I can not be responsible for. Do understand that we all have a limit of what we can use on our rom.
So seeing that so many people are having this stuck at gogogo problem, I have attached here the CWR zip for EU & TMOUS. The problem is not the Rom but your BOOT Partition Layout.
Just to be safe here are the instructions, "Just in Case":
Boot into Magdlr, make sure your phone is not connected by USB, then choose USB Flasher when it says waiting USB, plug your phone in, WAIT for it to say Waiting USB...USB, then flash the CWR I provided, these settings will and do work, when the phone reboots, then choose option 8 to go to recovery, and flash the rom, and right after flash the 1.3 update.
As a habit, you should after the flash of the rom go into the advanced option before rebooting, and choose error report, so that a recovery.log of the boot process is saved to your sdcard, and then you should pull this log into your computer. This log shows you the whole flashing process and can save you endless time and headaches of why your phone is not booting.
98% of the time the failure to boot is due to running out of room on the device because of the wrong partition layout. 1% of the time it is due to a wrong boot layout. 1% of the time its due to bad blocks on the phone that cant be writtten to which reduces your partition size.
I cannot guarantee that HD2 toolkit formats the partition layout correctly, or anything other program, this is what I use and it has not failed me yet, if you choose to use a different way of laying out your partition, then please do not blame the rom.
Thank you.
FAQ & Things
FAQ's
Q: Will you be putting out a CLK rom?
A: No, if you want to use clk its rather simple, extract the initrd.gz and zimage from the rom and place it in the fastboot folder. Flash the rom as normal, and then enter fastboot and type this command: fastboot -c "" -b 0x11800000 flash:raw boot zImage initrd.gz
Reboot, and enjoy!
Q: Does the TMOUS use an SD-EXT?
A: No, the whole rom fits on the phone, (yes you read this right), and you still have about 45mb of free space in the system folder.
Q: What about apps? Thats not enough room to put apps in!
A: All apps are scripted to install in the "DATA" folder, since you have nearly 400mb of free space, I think that is more then enough. Not to mention you still do have an SDCard.
Q: What about us EU users?
A: EU users will still have to use an SD-EXT. I didnt want to play with this much, since I dont have an EU HD2, but I am looking to see if I can lessen how much of the EXT is used. (Possibly moving framework and some rom apps into the phone). Still undecided.
Q: Are you planning to update this rom?
A: As of 1.5's release No. Due to the fact that a> All bugs should be squashed, b> There isnt anything new to add, c> and the biggest reason; Both my HD2's are biting the dust and can no longer continue flashing roms.
Q: Can I use a different Partition layout?
A: Sure, but if it doesnt work, then dont blame me.
Q: How stable is this ROM?
A: As stable as its going to get currently, there are too many missing parameters in this rom and until they are sorted out it will still have glitches and hiccups.
Q: I don't know how to flash this rom, can you help?
A: Sure. Read the sticky in this forum and learn the basics.
Q: This Rom is garbage, it doesnt work, and you call yourself a Chef?
A: No, Refer to the Answer above regarding me being a Programming Idiot.
Q: I like this rom do you have plans to do any others in the future?
A: No Comment.
Q: Can I donate to you for all you have already done?
A: Sure if you feel so inclined, its that green button under my thanks meter to the left, but if you dont, the thanks button will do.
Q: Can I download this ROM from my Phone?
A: Only if you are using mobile firefox or opera, the default browser will not work on the phone, it does not handle FTP links.
Q: I have these glitches on the screen, or some people call white noise every so often. How do I get rid of them, or do you have any plans to fix it?
A: Please See this Post: Graphic Glitches or White Noise
Q: I want to have your child!
A: Sorry I have 6 kids, the factory is closed.
All ROM Links & Add-Ons
Links to TMOUS & EU ROMS + Build Updates:
TMOUS & EU ROMS HERE
Mirrors: Thanks to Omnimann!
Links to EU & TMOUS
Add-Ons: (Attached to post removed Apk's)
Twitter
Tip Widget
Trends Widget
Flickr
ProTips
Stock
Voice Dialer
Voice Search
EReader
Wireless Tethering If needed. [20.06.2011]
Wired Tethering if Needed [23.06.2011]
Change Log V1.5 list of fixes/enhancements: RELEASED
Mail Widget 3rd Selection does show Email. (Fixed)
New OOBE Video (Thanks to Capychimp for permission for use) (Release 1.5)
3D Sense ability if wanted (Removed, too much resource used)
Ram Optimization
New market app
New Msg App
New Contact App
cLK compatible
Stock Advanced Power Menu V3 (Thanks to Dansta34!) (Found a Problem, Removed due to re-sizing Bug)
Car Panel REMOVED (Part of locations)
TYTUNG'S AGPS SUPPORT v1.8
World Clock Bug (Fixed V1.5)
Added/Enabled New boot animation screen.
Added/Enabled Bootup Audio
DOWNLOAD THE ROSIE FIX.ZIP TO CORRECT CONTACT WIDGET RE-SIZING FOR 1.5
CHANGELOG:
NEW EU ROM: V1.4.2.
EU Install Instructions: Install Rom 1.4, then Use Update Build Pack to Update to 1.4.2.
Icon Bug Fixed.
Updater for 1.4.2 Fixed. (Thanks to dansta34 for letting my look at his update script to fix mine.
APP to SD Fixed.
NEW TMOUS ROM: V1.4.2 (EU Users Working on finishing.)
TMOUS Install Instructions: Install Rom 1.4, then Use Update Build Pack to Update to 1.4.2.
Fixed Missing ICON issue.
NEW EU & TMOUS ROMS: V1.4.1 (TEMP REMOVED DUE TO ICON BUG)
Included all V1.4 Build Updates fixes into rom.
Fixed MMS Issue for T-Mobile Users, both EU & US (Thanks bigcnlb)
Build Update Pack to V1.4 (New Screenshots Posted on OP)
New Msg Widget
New Album
New Camera (Better Pictures)
New Contacts
New FM Radio
New Streamplayer
New MSG App (Now has Secure Box!)
Stock Notification Pull Down now has Recent Apps Window
Added Google Talk
Lockscreen Now has a BLACK Ring instead of Silver. (Thanx JHR5474 For pointing it out)
Add New Skins:
BlueSky Skin
Burgundy Skin
Build Update Pack to V1.3 (Removed due to Update with 1.4)
Removed Jaglicic Fix (Not needed anymore)
New EGL's added
Music Fixed
Weather Fixed
Weather Wallpaper Fixed
Gallery(HTC Album) Fixed
Maps Added and Fixed
Kingdom V1.2
Added Jaglicic Fix to Build Prop.
Kingdom V1.1 Initial Release
Build Updates:
Build updates are CWR Flashable, unless otherwise stated.
Download Rom 1.2, Flash it, then Right after Flash The Update pack. There will be no 1.3 Full Rom released.
Please use the Thanks Button, and leave the posts for Questions, Comments, Suggestions, and such.
Donators: (Thank you, it is humbly appreciated)
Pronor
Mihaelzeuch
Marcel van Egmond
so thats where you been
wow nice ! where download link ?
ah nice,
will try asap. :=))
been waiting on this...I KNOW IT WILL BE GREAT THANKS!!!!
Looks very nice!
I will test it later.
chapyy said:
wow nice ! where download link ?
Click to expand...
Click to collapse
look at post #4 ;=)
Link is down.
wow nice will try now
moises93 said:
Link is down.
Click to expand...
Click to collapse
downloading at 30 %
dirtytwo said:
downloading at 30 %
Click to expand...
Click to collapse
How do you manage to download ? I get a site where i have to login..........but i don't have a username or/and password.
Mazzie
downloading now
will give it a whirl when i get home loater today
and Thanks
mazzie66 said:
How do you manage to download ? I get a site where i have to login..........but i don't have a username or/and password.
Mazzie
Click to expand...
Click to collapse
Download is slow. Maybe you have to try later. No username or password.
Download slow 3 hours remaining
dirtytwo said:
Download is slow. Maybe you have to try later. No username or password.
Click to expand...
Click to collapse
Thanks, it was my Opera browser that couldn't manage the download ! FF is now doing the job.......slowly hahaha
Mazzie
Remember I am hosting the files on my own server, I have a limit of 5mb upstream, so please be patient.
And make sure to read the FAQ's I have just updated them with a post from Jaglicic If you still have FC's:
You can try this :
Download Android Terminal Emulator from the market and launch it
Type in su then hit enter. (Accept when SU asks if you want to allow root)
Type in echo ro.HOME_APP_ADJ=1 >> /data/local.prop then hit enter.
restart phone.
After a few ours testing I didn't have any Sense FC and no rosie restarts.
I am hoping that this is the way to keep rosie in memory.
God luck...
If it works please confirm here.
@Angeldeath
I dont know why you did implement your gps.conf (even though it was a lot of work for you) as tytung clearly said that his (which he had written by himself which means he knows about his own code) and everyone else's gps lib is not going to fetch any data of the gps.conf
so why even putting it in there? (or was it just because it can't hurt to put it in there?)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XYLON-EV is a Beta ROM and was first WIFI working 4.2.2 ROM, also my first ROM
Built from the source code of the by merging Evervolvs base , Xylon frameworks/settings and uses tytung r1 kernel for JB.
If you like my work, Kindly hit thanks meter button on the bottom left below my name.
If you want to donate, you can donate to the guys below in Credits for their hardwork.
Credits: My special thanks goes to
Evervolv Team for their legacy base to support qsd8k devices
Xylon Team for their frameworks and settings that make this rom so customizable
tytung, marc1706, Sportsstar89, Securecrt, Xylograph, ph03n!x, datagr, Rick_1995,
texasice, marco.palumbi, datagr, Robbie-P, eng.stk, zeppelinrox, zexmunze, zain0300 for all HD2 kernels, libs, mods, corrections
And all those individual/teams who I might have missed.
I customized this rom for my needs and sharing with you.
Still tons of stuff not tested so expect more bugs, crashes, reboot than the ones that I have already posted.
Must say the roms animation are very smooth. thank to 4.2.2
This is an unofficial ROM so do not post any queries or question about this rom in Evervolv's or Xylon's thread
Whats working:
• Phone
• Audio
• SMS
• Data: 3G/HSDPA
• GPS/AGPS
• USB Mass Storage
• Notification lights
• Wi-Fi
• Bluetooth (Not fully tested)
• 720p Video Playback Can be enable but break camcorder See Here
Not Working:
• HWA (I don’t know if it works or no. Don’t know how to check)
• Camera (preview is bad sometimes, but closing and restarting camera app fixs it for now)
• Camecorder (laggy bad preview)
• Panorama
• 720p Video Playback
• WiFi Tethering
• Native USB Tethering
• Cannot set APN manually, force closes ( confirmed bug reported by users )
Video of Xylon features on Nexus 4, most ( not all) feature are present.
Feature include Xylon-EV
• Flip to mute incoming ring > Phone>Settings
• Swap volume buttons when rotated to 90 or 180 degree > Display settings
• Volume Key control cursor > Language and Input
• Statusbar brightness slider > System>General UI
• Choose notification background > System>General UI
• CRT Screen off animation mode > System>General UI
• Recent RAM bar > System>General UI
• Nav Bar customization > System>Navigation Bar
• Nav Bar Transparency > System>Navigation Bar
• Hidden Navbar > System>Navigation Bar
• NavRIng customization > System> Navigation Ring
• Status Bar transparency and customization > System>Statusbar
• Quick toggles customization > System>Quick Toggle
• Pie control customization > System>Pie
• Dark Toggle> Settings
• Expanded Desktop > System>Power
PLEASE TAKE YOUR TIME TO READ THE 4th POST WHILE YOU DOWNLOAD THE ROM TO GET IT WORKING, TO GET THIS ROM WORKING SMOOTHLY
This is XylonEV download whose look, settings were moded by me
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
DOWNLOAD XYLON-EV V2
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
BOTH ROM ARE ASSIGNED SEPERATE FOLDER SO THEY WONT OVERWRITE DATA IN DATA2EXT MODE or OVERWRITE SYSTEM?DATA IN NATIVESD MODE
The is the Original Xylon ROM (This is actually how official Xylon should look, lot of setting available including HYBRID mode, but some might not work. Test version only)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
DOWNLOAD TEST VERSION XYLON V1
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
System partition 350MB (+ 20MB for bad blocks. Our HD2 is very old. But would strongly suggest 390MB if you are data2ext. Why? Read note1 in installation instruction on post4)[/FONT]
• 720p Video Playback Can be enable but break camcorder See Here
• For haret users NativeSD can try copying THIS file in sdcard\NativeSD folder and sdcard\NativeSD\XYLON_EV folder. Credits: Datagr
IF YOU LIKED THE ROM PLEASE HIT THANK BUTTON BELOW
Logs
- Added CM battery icons (Xylon update)
- Scrollable toggles ( Xylon update )
- Inverted Mode, Dark Xylon ( Xylon update )
- Better Version of Swap Volume ( Xylon Update )
- Gps fix ( Xylon fix )
- CM file manager (Dark theme)
- Various small fixes by Xylon
- No 720p, but I could enable it but breaks Camcorders so left it. Will fix in the next version
- Tytungs R2 kernel.
- Installer has option EngStk animations or stock animation. Thanks zexmunze. View EngSTK animations here
xxxxxxxxxxxxxxxxxxxxxxxxxxx
DOWNLOAD V1
xxxxxxxxxxxxxxxxxxxxxxxxxxx
System partition 340MB (+ 20MB for bad blocks. Our HD2 is very old. But would strongly suggest 390MB if you are data2ext. Why? Read note1 in installation instruction on post3)
1. For some who have trouble booting NativeSD can try copying THIS file in sdcard\NativeSD folder and sdcard\NativeSD\XYLON_EV folder. Credits: Datagr
2. Solution for touchscreen pinch2zoom is HERE Credits: zexmunze
3. Solution for hardware key light disable is HERE Credits: zain0300
4. Solution for call echo on the other end (microphony)is HERE Credits: zexmunze
5. Some more build.prop mods that will make ROM better try THIS Credits: zexmunze
6. Greenesh photo in lowlight with flash fix is HERE
IMPORTANT!! Please take 2 minutes to read this
• After completing installation of ROM at the end of the aroma installer, the script will ask if you want to reboot. Once you click finish it might cause an error. Don’t worry about this as the ROM has installed successfully.
• On my class 10 card, the ROM take around 5mins to boot. So if you are on slower card or nand, first boot and setting up will be painfully long. Please have patience.
• After signing in google and completing setup wizard, you might get blank screen. Wait for 10 sec and hit the hardware home button on your device. The launcher will show. If you get an “not responding” for setup wizard please click “Wait” . Do not click OK.
• Developer option is not enabled by default. Please go to Settings>About Phone and tap on Build number 10 time. Dev options will be enable. Now go to Developers option in Settings and enable “Force GPU rendering”
• By default the Governor is On Demand. For better battery life and smoothness choose SmartassV2. Don't change default CPU frequencies. Keep it 245-998Mhz as to avoid bugs caused by changing frequencies. Dont forget to tick/check "set on boot" after changing governor.
• Lock screen clock widget is slightly towards the right. You need to remove the widget and add again to get it in center (Don’t know if it’s a bug or feature but other ROMs have this too)
• On 240 dpi the lock screen widget, the date gets clipped if we enable Nav bar. So stick to default DPI is 200 and you are good to go. (200 is my preference since NexusHD2 ICS coz everthing seems so cramped on 240 and you have to scroll everytime for anything).
• If your are using Dual pane mode or tablet combined nav/status bar stick to 160 dpi or else everthing will got out of place.
IF YOU HAVE A PROBLEM AND YOU WANT TO POST IT ON THIS THREAD, PLZ GIVE US AT LEAST THIS MINIMUM DETAILS
1) Tmous1024 or EU448
2) MAGLDR or CLK
3) What recovery? CWM, 4ext etc etc
4) Installation Nand, Data2Ext, NativeSD
5) Using Swap or Odex
6) System partition.
For example you can write " TMOUS,CLK,4ext,Data2ext, No swap, no odex, Sys=340MB. I have a problem *********"
Thank you for you time
Installation instruction
There are many different bootloaders/recoveries/method to install in HD2, but If you still new to HD2 and you are starting from scratch the fastest would be this.
1) Download HD2 toolkit and install HSPL, MAGLDR. Download and instructions here
2) Download 4ext recovery from here and follow this instruction bellow:
Just a brief understanding. During installation of rom has 3 options for setup. 1. NAND(Full, Custom ) 2. DataOnExt 3. NativeSD
In brief
1. NAND. Installing everything(System and data) on phone(Nand). Further you will have option full install or custom install
2. DataOnEXT. Installing all system files on phone(NAND) and Installing all data files on sdcard(EXT4 partition)
3. NativeSD. Installing everything(System and Data) on sdcard (EXT4)
Lets start with DataOnExt
I have attached a file for 4ext recovery from "Native sd" thread which makes partitioning of sdcard with ext4 very simpler.
Installing recovery
1. Download and extract the attached file in folder example lets call this folder "D:\4ext".
2. Boot in MAGLDR (By holding power off key during start)
3. Choose "USB flasher" Connect your Hd2 to computer using usb cable.
4. Run the DAF.exe from the folder that you have downloaded/extracted example "D:\4ext" click next > next> "(it will show error "readfile missing" no problem. just continue)
This will install 4ext recovery and reboot the phone
Partitioning SD card with ext4
5. Boot into 4ext recovery from MAGLDR (by choosing ADrecovery) you will see menu from 4ext which is quite similar to CWM recovery.
6. Go to "advance" > "partition SD card" > "Remove all partition and start from scratch"
Select the size of for 1st partition (Choose greater than 1024MB) (This will be the size of data partition)
Select the size of for 2nd partition (Choose "Skip")
Select the size of for swap partition (If you using Swap choose the size of swap partition or if not "Skip") then it will start formating and ask you what format do you want to format sdext.
Choose for format "EXT4" and Let it complete formating
Installing ROM
7. Now copy my ROM zipfile into the sdcard (You can do this from the recovery itseft by choosing "toggle usb storage" in the main menu and connecting hd2 to pc using a cable. after finish copying the file safely remove device from PC and slect unmount from HD2 )
8. In recovery main menu choose "install from sdcard"
9. Choose "NAND with DataOnEXT" and then choose full Install or custom.choose whatever you wish. continue with setup. ROM will install
10. Reboot and enjoy.
Note 1 Default system partition size selected for DATAonEXT is 390M(Why 390MB? since data is mounted on sdcard, why not use whole Nand as system).
if you want to adjust, change the value in flash.cfg in the 4ext folder before proceeding step 2
Note 2 the above setup is for DATAonEXT. If you decide to install NAND minimum install change to "system ya 370M" in flash.cfg and then continue step 2, 3, 4, 7, 8. (Skip step 5, 6) Step 9 choose NAND and custom
Note 3 . If you decide to install NAND full install change to "system ya 370M" in flash.cfg and then continue step 2, 3, 4, 7, 8. (Skip step 5, 6) Step 9 Choose NAND and full
Note 4 . If you decide to install NativeSD do steps 1 to 8. step 9 choose NativeSD. Install ROM. after installation reboot to MAGLDR.
In the main menu of MAGLDR choose 10.services > 1. bootsettings > 3. AD SD dir > select folder "NativeSD" (browse using Volume keys)
Go back to main menu
choose 10.services > 1. bootsettings > 1. Boot Source > 1. Android from SD
You know I Have Xylon running on my phone on nativeSD..
But mine is mere a port.
Congratulations for your build dude..!!
Feedback coming soon
Really nice to see one more dev.
Thanks button(s) pressed.
It's a shame that I JUST installed Tytung's new JB yesterday, should have waited one more day!
Marvlesz said:
Really nice to see one more dev.
Thanks button(s) pressed.
It's a shame that I JUST installed Tytung's new JB yesterday, should have waited one more day!
Click to expand...
Click to collapse
I'm not a dev. Dont even know C++ or Java... But I do read a lot of Github, so I get some basic idea and succeeded luckily...
Dont replace Tytungs ROM.. Remember this is beta dont know what more bugs are present.... Just flash on NativeSD and try it out before you replace and regret...... Just a safe guard comment....
flashing now
will give a full review later today as i have a couple appointments to go to
up and running native sd wifi on
will test it...
Wifi working,connected send/receive data
BT working,send/receive file
Graphic is little laggy,great start main futures working
Amazing...
Bluetooth is on (will try to connect a device)
Wifi is on (will try to connect a device)
Very nice ROM so far
Awesome
Zejsters said:
Bluetooth is on (will try to connect a device)
Wifi is on (will try to connect a device)
Very nice ROM so far
Awesome
Click to expand...
Click to collapse
Waiting more comments from you. if its stable enough I'll flash it for daily use test.
And OP how you managed to fix wifi ?
I used NativeSD method (MAGLDR), but it got stuck at HTC logo screen. Waiting for 20 mins but nothing happened. Please help me, what should I do now? Thanks
I'm on clk dataonext, data works fine, wifi can see my box but I have no IP adress only macadress, cannot connect here
Qtadb is not working : exec '/system/bin/sh' failed: No such file or directory 2 2) -
i´m on magldr and native sd,
wifi=ok, data=ok, it´s very very smoothly, download from play store=ok, switched wifi on/off=ok
bluetooth=not tested
thanx very much
gps=ok (tested with gps status)
this is the rom i was waiting for, almost as smooth as GB and everything including WIFI is working. Faster than any 4.1.2 rom on my class 2 sd card. If one has better SD Card he should definitely give it a shot.
Re: [18 March 2013] [ROM] [JB] [WIFI] XYLON-EV V1
Can someone test GPS please?
Sent from my PIXELDROID HD2 using xda premium
@macs18max: I don't know what happened with initrd.gz (NativeSD). It can't work with my phone. However, I used your initrd.gz (NAND) + HypoTurtle patch -> works perfectly. Your rom is the first 4.2 rom within working wifi. Thanks for your hard work :good:
datagr said:
Can someone test GPS please?
Sent from my PIXELDROID HD2 using xda premium
Click to expand...
Click to collapse
GPS works with Google map.
datagr said:
Can someone test GPS please?
Sent from my PIXELDROID HD2 using xda premium
Click to expand...
Click to collapse
gps=ok (tested with gps status)
quantan said:
@macs18max: I don't know what happened with initrd.gz (NativeSD). It can't work with my phone. However, I used your initrd.gz (NAND) + HypoTurtle patch -> works perfectly. Your rom is the first 4.2 rom within working wifi. Thanks for your hard work :good:
GPS works with Google map.
Click to expand...
Click to collapse
Hey... Anyone else have an issue with NativeSD... I think it's my installer and the way I'm zipping it... For me I took one whole day to get the installer working right.... I tried more than 15times and finally got it working... For the same system files, and same procedure, sometimes I had superuser problem, sometimes SytemUI force closes... I'm using gzip in Ubuntu. I also tried 7zip (store mode) in windows but it failed....
Any idea's Zesjters? you r a pro in this...
macs18max said:
Hey... Anyone else have an issue with NativeSD... I think it's my installer and the way I'm zipping it... For me I took one whole day to get the installer working right.... I tried more than 15times and finally got it working... For the same system files, and same procedure, sometimes I had superuser problem, sometimes SytemUI force closes... I'm using gzip in Ubuntu. I also tried 7zip (store mode) in windows but it failed....
Any idea's Zesjters? you r a pro in this...
Click to expand...
Click to collapse
Installed your zip using 4ext recovery on MAGLDR and had no problem with NativeSD install everything is working as it is suppose to