I ran task 29, and after its done all my phone does is stay at the olds roms startup splash screen!!!! What do i do??? Is it bricked??? Why would someone tell me to do that if it was gonna break my devise??? can someone please help
alroco20 said:
I ran task 29, and after its done all my phone does is stay at the olds roms startup splash screen!!!! What do i do??? Is it bricked??? Why would someone tell me to do that if it was gonna break my devise??? can someone please help
Click to expand...
Click to collapse
lmfao relax. Hold your volume button down, hold the end key down(the button you hang up the phone with) then push the power button.
When your phone boot you should see a gray screen that say serial, plug your device into the computer and serial should change into usb. Then run the rom and there u go
BeEazy10 said:
lmfao relax. Hold your volume button down, hold the end key down(the button you hang up the phone with) then push the power button.
When your phone boot you should see a gray screen that say serial, plug your device into the computer and serial should change into usb. Then run the rom and there u go
Click to expand...
Click to collapse
Doesn't that trigger Ramdump mode (well, I don't know what that means, actually)?
All the OP needs is to go to Bootloader Mode to flash a ROM via USB. Bootloader is easily accessed by: Turn off phone, then press/hold Volume Down + Power button.
thanks guys, ive been using android, and never a minmo device, thanks everyone!!
sumflipnol said:
Doesn't that trigger Ramdump mode (well, I don't know what that means, actually)?
All the OP needs is to go to Bootloader Mode to flash a ROM via USB. Bootloader is easily accessed by: Turn off phone, then press/hold Volume Down + Power button.
Click to expand...
Click to collapse
Yes that mode what ever its called
If you read the sticky posting on Task29, you would see it tells you that this is normal behavious for Task29, and it also tells you how to get out of it
steviewevie said:
If you read the sticky posting on Task29, you would see it tells you that this is normal behavious for Task29, and it also tells you how to get out of it
Click to expand...
Click to collapse
Sortof. I just tried task29 for the first time a few days ago. I freaked out when I got in the same situation as him, but then read through the thread. There's the option of shutting the phone off, and pressing vol down + power key. I ended up doing vol down + power key + push reset with stylus at the startup screen. Simplest solution for me.
taking off the battery, istnt that simplest?
Amd here is the theme about this
raz1337 said:
Sortof. I just tried task29 for the first time a few days ago. I freaked out when I got in the same situation as him, but then read through the thread. There's the option of shutting the phone off, and pressing vol down + power key. I ended up doing vol down + power key + push reset with stylus at the startup screen. Simplest solution for me.
Click to expand...
Click to collapse
In the very first posting of the Task29 thread, it says :
When phone boots to "Touch Pro 2" screen (or whatever your splash screen happens to be), I hold down the volume down button while hitting the reset button.
Click to expand...
Click to collapse
IMO, the smartest thing to do is when Task29 is near 100% (I think it pauses at around 96%), hold down the Volume Down button. That way, when the phone (tries to) reboots, it goes straight to Bootloader.
thanks all you have been more than helpful, ive been using this site for a while (for my android device) but just recently made an account. All of you keep on getting it done!!!
Moved as not ROM Development.
BeEazy10 said:
lmfao relax. Hold your volume button down, hold the end key down(the button you hang up the phone with) then push the power button.
When your phone boot you should see a gray screen that say serial, plug your device into the computer and serial should change into usb. Then run the rom and there u go
Click to expand...
Click to collapse
Hey, I have a Touch Pro2 and I tried the key combination above and it didn't work for me. I did get it to work however using the send key (green button) instead of the end key....
I.e, held volume down button, held send key and pressed power key once... ;-)
Phone MUST be off before doing the key combo...
Related
hi all.
My LG optimus G F180S Korea version can't start, it get stuck at logo LG. I have already read about this error: "stuck at logo LG", the aswear is use hard reset, but I can not hard reset my phone by press Down volume and Power button
Can anyone help me solve problem?
thanks in advance!
Make sure your phone is turn off. If u not sure, press Power about 10s. After, Pressing Volume - and Power. Goodluck.
phamluong92 said:
Make sure your phone is turn off. If u not sure, press Power about 10s. After, Pressing Volume - and Power. Goodluck.
Click to expand...
Click to collapse
unluckily, I can not hard reset by pressing volume down and power
DO U have another method?
thanks!
for hard reset on stock cwm : turn phone off. press vol up + vol down + power.
I had the same problem. I even got worse and the phone wouldn't even turn on. So what worked for me is this:
I put the phone in download mode (Vol Up + Vol Down and then plug the usb)
After that I open LG Mobile Support tool. http://csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
Wait for the program to detect the phone then go to Options-> Upgrade Recovery. Wait for the process to finish.
After it finished the phone loaded normally and everything was intact. All my files and apps were untouched.
so reason, i'm delete file build.prop. my phone is hard brick. i press power + volume up it turn on logo htc and off. i press power + volume down. nothing happen and when i charge baterry. no charge. help me
Kent21 said:
so reason, i'm delete file build.prop. my phone is hard brick. i press power + volume up it turn on logo htc and off. i press power + volume down. nothing happen and when i charge baterry. no charge. help me
Click to expand...
Click to collapse
1. Unplug phone - VERY important
2. power on phone, doesn't matter if it is boot looping or whatever
3. hold vol up and power EXACTLY 10 seconds
4. let go of both
5. hold vol down and power till boot loader comes up.
You have no charge because you are running an old ver of twrp, get 2.7.1.0
an0ther said:
1. Unplug phone - VERY important
2. power on phone, doesn't matter if it is boot looping or whatever
3. hold vol up and power EXACTLY 10 seconds
4. let go of both
5. hold vol down and power till boot loader comes up.
You have no charge because you are running an old ver of twrp, get 2.7.1.0
Click to expand...
Click to collapse
hold vol up and power EXACTLY 10 seconds
tks for your help. i'm press 30s. my phone is rescure
Share how I fixed my HTC M8 with the same problem.
Hi,
I just want to share how I fixed my HTC M8 with the same issue. The method is the same but a bit different. I found the solution from googling the below link:
http://forum.xda-developers.com/htc...ter-download-mode-t2853100/page2#post62490577
The essential method is to keep holding down the power button and don't let it go while pressing on the volume up button to reset. At the very moment before the phone resets and shows the HTC logo white screen, switch from pressing the volume up button to the volume down button while holding down the power button. Or you can count 10 seconds and switch before the screen resets.
I hope this helps other people with the same issue.
an0ther said:
1. Unplug phone - VERY important
2. power on phone, doesn't matter if it is boot looping or whatever
3. hold vol up and power EXACTLY 10 seconds
4. let go of both
5. hold vol down and power till boot loader comes up.
You have no charge because you are running an old ver of twrp, get 2.7.1.0
Click to expand...
Click to collapse
Thanks, the pwr + vol-up 10 seconds before the phone hard resets, them pwr + vol-down got me back into hboot and recovery and then out of a build.prop issue.
I have no idea why this is a thing: Getting into the boot loader is usually easy. I can't imagine why when the system doesn't boot normally that the standard procedure to enter hboot changes.
regardless of retarded engineering on qualcom or htc's part, thank you an0ther.
I tried flashing ViperOneM8 1.8.0 (ViperOneM8 1.7.1 -> 1.8.0) which I guess was the wrong thing (I think that was an update, should have started with 1.7.1 first). Anyway... Now my M8 boots to some type of android base OS without a lot of things...
1) It's not possible to get to settings as there is no settings app in the app drawer.
2) There is no title bar/task bar at the top. The area that holds the time, and a few icons at the top is gone.
3) There is no background.
4) There is no way to get on the WiFi do to #1 and because of this I can not add my google account. That in turn means no google play store access.
But the BIGGEST thing of all... I CAN NOT BOOT TO FASTBOOT!!!
- Power the device off.
- Hold the volume down button (also tried the volume up button) + press power usually boots strait to fastboot mode.
I THINK it has something to do with the fact that by default in the settings I need to untick the fastboot option in the dev options.. Well I can't get to settings. Now what?
arvo.bowen said:
I tried flashing ViperOneM8 1.8.0 (ViperOneM8 1.7.1 -> 1.8.0) which I guess was the wrong thing (I think that was an update, should have started with 1.7.1 first). Anyway... Now my M8 boots to some type of android base OS without a lot of things...
1) It's not possible to get to settings as there is no settings app in the app drawer.
2) There is no title bar/task bar at the top. The area that holds the time, and a few icons at the top is gone.
3) There is no background.
4) There is no way to get on the WiFi do to #1 and because of this I can not add my google account. That in turn means no google play store access.
But the BIGGEST thing of all... I CAN NOT BOOT TO FASTBOOT!!!
- Power the device off.
- Hold the volume down button (also tried the volume up button) + press power usually boots strait to fastboot mode.
I THINK it has something to do with the fact that by default in the settings I need to untick the fastboot option in the dev options.. Well I can't get to settings. Now what?
Click to expand...
Click to collapse
Shut down phone.
Turn it on
Hold volume up+power button until it restarts
As soon as you get the black screen for restart release power button and hold volume down.
If your timing is right you will enter bootloader.
I tried it and it definitely works
Flash your nandroid or any rom you know was ok to begin with and you are up and running!!!
stathis95194 said:
Shut down phone.
Turn it on
Hold volume up+power button until it restarts
As soon as you get the black screen for restart release power button and hold volume down.
If your timing is right you will enter bootloader.
I tried it and it definitely works
Flash your nandroid or any rom you know was ok to begin with and you are up and running!!!
Click to expand...
Click to collapse
Tried that...
1) Powered off device.
2) Held power button for about 2 seconds until it came on then let go.
3) IMMEDIATELY I pressed and held down the power and volume up buttons.
4) The phone continues to boot up a little bit longer and gets to the verizon check (verizon splash screen) then shortly after goes black (as expected).
5) IMMEDIATELY let go of power button continuing to hold volume up button.
... .. .. .
6) I get the white screen that says HTC (powered by android)... NOT a bootloader screen as expected.
Update... When I try to click on the app drawer then top right click the little three dots, I try and "Manage Apps" ... ERROR "App isn't installed"...
:/
arvo.bowen said:
Update... When I try to click on the app drawer then top right click the little three dots, I try and "Manage Apps" ... ERROR "App isn't installed"...
:/
Click to expand...
Click to collapse
If you connect the phone to the computer, can you get fastboot or adb to recognize the phone?
If so, you can try adb reboot bootloader command or fastboot reboot bootloader comand
arvo.bowen said:
Tried that...
1) Powered off device.
2) Held power button for about 2 seconds until it came on then let go.
3) IMMEDIATELY I pressed and held down the power and volume up buttons.
4) The phone continues to boot up a little bit longer and gets to the verizon check (verizon splash screen) then shortly after goes black (as expected).
5) IMMEDIATELY let go of power button continuing to hold volume up button.
... .. .. .
6) I get the white screen that says HTC (powered by android)... NOT a bootloader screen as expected.
Click to expand...
Click to collapse
After 4 you release power button and press volume DOWN.
This will get you to the bootloader
stathis95194 said:
After 4 you release power button and press volume DOWN.
This will get you to the bootloader
Click to expand...
Click to collapse
Yea, I ended up doing the following...
1) While device is powered on, Press and hold Volume Up + Power until device reboots.
2) When it starts to reboot continue holding the Power button and change to the Volume Down.
That worked for me.
Hello, sorry for my english.
Since a few weeks I can't turn on the phone. When the D855 isn't charging it keeps in LG logo loop. If I plug it the charger it turns on but when I write my PIN Code its shutdowns and again I got the LG logo loop (with the phone charging). I have to remove the battery to try again but I can't use my phone...
Some help please!! I haven't find any post with that trouble, sorry if there are some solution in the forum
Thank you!!
ian6678 said:
Hello, sorry for my english.
Since a few weeks I can't turn on the phone. When the D855 isn't charging it keeps in LG logo loop. If I plug it the charger it turns on but when I write my PIN Code its shutdowns and again I got the LG logo loop (with the phone charging). I have to remove the battery to try again but I can't use my phone...
Some help please!! I haven't find any post with that trouble, sorry if there are some solution in the forum
Thank you!!
Click to expand...
Click to collapse
Try this:
1 Turn the power off.
2 Press and hold the Power/Lock key + Volume Down key on the back of the phone.
3 Release the Power/Lock Key only when the LG logo is displayed, then immediately press and hold the Power/Lock Key again.
4 Release all keys when the Factory hard reset screen is displayed.
5 Press the Power/Lock Key to continue or either of the Volume Keys to cancel.
6 Press the Power/Lock Key once more to confi rm or either of the Volume Keys to cancel.
copy2050 said:
Try this:
1 Turn the power off.
2 Press and hold the Power/Lock key + Volume Down key on the back of the phone.
3 Release the Power/Lock Key only when the LG logo is displayed, then immediately press and hold the Power/Lock Key again.
4 Release all keys when the Factory hard reset screen is displayed.
5 Press the Power/Lock Key to continue or either of the Volume Keys to cancel.
6 Press the Power/Lock Key once more to confi rm or either of the Volume Keys to cancel.
Click to expand...
Click to collapse
I tried that but doesn't work. It continues in LG logo loop. What could I do? My PC can't detect my phone too.
ian6678 said:
I tried that but doesn't work. It continues in LG logo loop. What could I do? My PC can't detect my phone too.
Click to expand...
Click to collapse
put the usb cable in your pc, not on the phone, then press and keep it the volume down pressed, and now connect your device without realease the volume down key, see if they go to emergency mode or download mode!
copy2050 said:
put the usb cable in your pc, not on the phone, then press and keep it the volume down pressed, and now connect your device without realease the volume down key, see if they go to emergency mode or download mode!
Click to expand...
Click to collapse
I did that you said (but keeping volume up pressed, with volume down it did nothing). It enters on download mode but it only keeps in this mode like 2 secs, if I keep volume up pressed it enters again and again, if I release the button it restarts to LG logo loop.
ian6678 said:
I did that you said (but keeping volume up pressed, with volume down it did nothing). It enters on download mode but it only keeps in this mode like 2 secs, if I keep volume up pressed it enters again and again, if I release the button it restarts to LG logo loop.
Click to expand...
Click to collapse
so, nothing you can do to solve the problem, if you are in guarantee time so the only thing you can do is sending the phone to LG Service Center to try fix the problem or maybe replace it!
I have TWRP installed, and have managed to run it a few times. Now I cannot start TWRP at all.
From off, if I switch on, the following happens:
1) Screen with Samsung Galaxy A70 - Secured by Knox
2) 0.5 seconds later another screen, "this phone's bootloader is unlocked and it software integrity. .." and "press power key to continue..."
3) 5 seconds later, same screen as (1)
4) 3 seconds later, red letters "this phone is not running Samsung's official software"
5) 3 seconds later blank screen with "samsung" and then booting to android.
In my experience I have to flash twrp every time I want to use it( I don't know the reason but I couldn't fix it ) , for booting twrp on the other hand I turn off the phone first, then I press power button+volume down until the "this phones bootloader..." screen appears, here is the tricky part, you have to quickly let go of these two buttons, press power button, let go of the power button (after the warning disappeared) and then press volume down button (and hold it) until twrp logo appears, this happens really fast so you may need to do it a few times to get used to it.
mobin22 said:
In my experience I have to flash twrp every time I want to use it( I don't know the reason but I couldn't fix it )
Click to expand...
Click to collapse
Yes, same here, the only time I have managed to run TWRP on this phone, is right after a flash.
mobin22 said:
and then press power down button
Click to expand...
Click to collapse
Do you mean volume down?
Zilliman said:
Yes, same here, the only time I have managed to run TWRP on this phone, is right after a flash.
Do you mean volume down?
Click to expand...
Click to collapse
Power off the device, plug into a pc, wait for it to start charge, hold vol up and power till it turns on. Wala boots to twrp. If you have magisk installed,you can use the reboot option within magisk.
mobin22 said:
In my experience I have to flash twrp every time I want to use it( I don't know the reason but I couldn't fix it ) , for booting twrp on the other hand I turn off the phone first, then I press power button+volume down until the "this phones bootloader..." screen appears, here is the tricky part, you have to quickly let go of these two buttons, press power button, let go of the power button (after the warning disappeared) and then press volume down button (and hold it) until twrp logo appears, this happens really fast so you may need to do it a few times to get used to it.
Click to expand...
Click to collapse
Samsung changed how to enter recovery on Android 11. Power off device, plug into pc, wait for it to charge, then hold vol up and power till it turns on. Alternatively, if you have magisk installed, use the reboot options within magisk.
I did that. Thanks!
But it has gone to:
Android Recovery
Samsung /a70qxx/a70q
11/RP1A.200720.012./A705FNXXUB5DVB3
user/release-keys
Use volume up/down and power.
Reboot system now
Reboot to bootloader
Apply update from ADB
Apply update from SD card
Wipe date/factory reset
...
...
...
Where is TWRP? It seems it's gone.
Zilliman said:
I did that. Thanks!
But it has gone to:
Android Recovery
Samsung /a70qxx/a70q
11/RP1A.200720.012./A705FNXXUB5DVB3
user/release-keys
Use volume up/down and power.
Reboot system now
Reboot to bootloader
Apply update from ADB
Apply update from SD card
Wipe date/factory reset
...
...
...
Where is TWRP? It seems it's gone.
Click to expand...
Click to collapse
That's because you're not installing it properly go back to my guide and follow it exactly and stop listening to these other people. I've been modding this device since it first came out with Android 9, I know every inch of this device. You're getting confused by what other people are telling you
MarvinMod said:
5- Press and hold vol down and power till the screen turns blank then immediately press and hold vol up. The device will reboot then land you in the twrp splash screen
Click to expand...
Click to collapse
It fails here, on this step. After successful flash of recovery.tar, power + vol down to reboot, cable still connected, nothing you can do now can bring TWRP up. The phone boots into Android.
EDIT: I think I have now got it. I will update in a few mins.
Zilliman said:
It fails here, on this step. After successful flash of recovery.tar, power + vol down to reboot, cable still connected, nothing you can do now can bring TWRP up. The phone boots into Android.
EDIT: I think I have now got it. I will update in a few mins.
Click to expand...
Click to collapse
After successful flash of recovery.tar, power and vol down to reboot, as soon as the phone screen goes blank, immediately release all keys and press and hold vol up. Must be as soon as screen goes blank. The device will then reboot twice and land you in twrp splash screen. You must hit vol down and power after successful flash then when screen blanks, vol up. If you miss this step, twrp will not hold and revert back to stock recovery.
Here is the notes I made today:
****************************************************************
INSTALL + START TWRP
phone is off
press up + dn
insert cable
go into download (press up)
ODIN 3.14 + AP:tar(vbmeta.img+twrp.img), auto reboot off, press upload
when it succeeds, press dn + pwr until it reboots
then quickly up + pwr until it starts (no need to hold down)
this starts in TWRP
from powered off
press pwr button
goes into twrp or android(system) -- depending on what was used last time
if we used reboot->system last time it will now **Always** go into system!
to go back into twrp:
switch off
power cable until charge
pwr + up until it starts
****************************************************************
The above means that you CANNOT go back to TWRP unless you have a cable and a PC near by.