Multi 2.0 is an application that shows the Dual-Touch Technology and explain how it works!
[30,July 2010]explain more things about the Dual-Touch Technology.
downiel said:
... but when i press one of these two fingers a little bit stronger, the "Fake Point" is going crazy That does not appear when i am pressing with my nails, fortunately :d
Click to expand...
Click to collapse
Click to see this picture,it may tell you something about it.:
Also
It's Not exactly on the GamePad that "You can ONLY MOVE the SECOND finger you put with your First finger FIXED!"
Just do these step by step,if you wanna understand what I mean:
1.Run this app and turn to "Gamepad" page
2.Press the left-button with a finger of your left hand
3.Press a round-button with a finger of your right hand
-Now You can only move your right-hand finger.
4.Release your left-hand finger.
5.Do as the Step 2 again.
-Now You can only move your left-hand finger.
That's all.
[Explanation]
After Releasing your first finger.The Fake Point inside would go out of the screen.
So the app knows that you have release your first finger.
And it would treat the Second Point as a New First Point.
It means that you can set a New Second Point again and move it.without releasing all your fingers!
[27,July 2010]VGA & WQVGA versions Available Now!
Features:
Picture - You can drag the picture with one finger or stylus and zoom the picture with two fingers[Pinch to Zoom]
GamePad - An On-Screen GamePad that support up to two pressed buttons!
Fact - To show how this application works inside.
Just download and run it without installing..
It may work on all WinMo with resistive screens.
need .NET CF 3.5/3.7 which I think you all know it.
Notice:
My English may be too suck to be understood.
Touch the screen with two fingers one by one but not at the same time!(You can do it quickly even it seems to be done at a time)
To zoom the picture,a gab of about 2cm between two fingers is needed when you start touching the screen!
A Chinese version of sentence for who may understand its translation better than the English version:想要缩放图片,两只手指在按下的时候必须有大约2cm的间距!
You can ONLY MOVE the SECOND finger you put with your First finger FIXED![Not exactly on the GamePad]
How it works?
See the "Fact" part of the application.
And touch the screen with two fingers(one by one).
You'll get three points:
Fixed Point - It is got when you put your First finger.
Real Point - It is truely detected by the hardware when two fingers are put.
Fake Point - where your second finger put.As a matter of fact,the hardware doesn't know anything of it.The position is worked out by the application.
How to get the Position of the second Finger?
NOTICE that when two or more fingers are put on the screen,the hardware would just get the Point in the central of shape which is made up by fingers' Positions.
So.Two fingers's positions(points) make a line.And the hardware gets the "Real Point" in the middle of the line.
Reversely think.We've got the First finger's Position and the Mid Position.
The Second Finger's Position should be in the direction opposite the First finger through the Mid Position.
PS
-This is my first post here.
-I know some members here has been developing the Multi-Touch(Dual-Touch) technology.But I had the idea of creating multi-touch application last year.
-The picture on the application written "Mobile 2.0" but not "Multi 2.0".It's a website[mobile20.com.cn] in China that make evaluations of mobile.The Chinese version of this application was released there on June 7,2010
-Sorry for my poor English..
Pretty interesting app just tested it on my wvga phone
But what really caught my eye was the gamepad thing. Would love to see this in morphgear so we have dualtouch which would make many games more playable.
Maybe I dream to much but still would be great
Do you have future projects for resistive screens now?
iceeyes91 said:
Pretty interesting app just tested it on my wvga phone
But what really caught my eye was the gamepad thing. Would love to see this in morphgear so we have dualtouch which would make many games more playable.
Maybe I dream to much but still would be great
Click to expand...
Click to collapse
I'm willing to give the code to anyone who wants it.
(It's written in VB.NET)
But I really have to modify it.As the code is in a mess within some Chinese comments.
Maybe I'll write a 'GamePad'-only(or 'Picture'-only) program for developers.
zinconnu said:
Do you have future projects for resistive screens now?
Click to expand...
Click to collapse
Maybe I'll release a dual-touch drum that called "Drum It!"
__________
I should have clicked MULTI-QUOTE..
But now I can't delete this post.
TangoChen said:
Maybe I'll release a dual-touch drum that called "Drum It!"
Click to expand...
Click to collapse
Good idea, that will be funny! But i prefer the gamepad.
Hey,Ge Men,Nice work!
TangoChen said:
I'm willing to give the code to anyone who wants it.
(It's written in VB.NET)
But I really have to modify it.As the code is in a mess within some Chinese comments.
Maybe I'll write a 'GamePad'-only(or 'Picture'-only) program for developers.
Click to expand...
Click to collapse
Wonderfull
Sadly I dunno anything about programming , so I can only support by testing/donating
Keep up the work, it would extend all my expection having dual touch on my phone
ghost_nup said:
Hey,Ge Men,Nice work!
Click to expand...
Click to collapse
Hi.a Chinese guy.
I just couldn't understand what is 'Ge Men'.
But after searching for it on Google.It returns'您是不是要找： 哥们 各门 格门'
lol.It means man in Chinese.
iceeyes91 said:
Wonderfull
Sadly I dunno anything about programming , so I can only support by testing/donating
Keep up the work, it would extend all my expection having dual touch on my phone
Click to expand...
Click to collapse
Thx!!But I haven't got a paypal account yet..It may takes one year till I'm 18 years old.
Great App! I have tested it on my Touch Pro (VGA Screen). In Gamepad mode I have only one round button but everything else worked good!
If both fingers are horizontal to the screen its pretty precise, if I have my fingers diagonal on the screen it differs much.
But: Thank you for your app, it shows that it is possible
Greets
The QVGA won't work on my kaiser .
The pinch zoom works though, Nice work!
The second finger on the screen is a bit off, from the fact tab, so that's why the gamepad doesn't work too well. It registers a press in another spot.
Which file do u use on VGA?
Multi2.0 QVGA.7z or Multi2.0 WVGA.7z ?
终于有中国的哥们发布强帖了~
终于有中国的哥们发布强帖了~
KobiP said:
Great App! I have tested it on my Touch Pro (VGA Screen). In Gamepad mode I have only one round button but everything else worked good!
Click to expand...
Click to collapse
AdamiX said:
Which file do u use on VGA?
Multi2.0 QVGA.7z or Multi2.0 WVGA.7z ?
Click to expand...
Click to collapse
Sorry for omitting the vga version!
And it's uploaded just now.
KobiP said:
If both fingers are horizontal to the screen its pretty precise, if I have my fingers diagonal on the screen it differs much.
But: Thank you for your app, it shows that it is possible
Greets
Click to expand...
Click to collapse
Ya I found the problem,too.
And I thought it was the screen/hardware's problem.
Maybe I'll add a feature for a future project to adjust the value.
Thanks for reminding me!
nemuro said:
The QVGA won't work on my kaiser .
The pinch zoom works though, Nice work!
The second finger on the screen is a bit off, from the fact tab, so that's why the gamepad doesn't work too well. It registers a press in another spot.
Click to expand...
Click to collapse
Oh.Thanks for reporting the problem!
This sounds great!
I hope you go on to make a gamepad to be used in emus, so that we can play the same games the HD2 does!
nice work.
Very good work! Gamepad works very well, resizing the image not as good, but that's also a great progress Maybe just my phone has this problem (Touch HD), but when i press one of these two fingers a little bit stronger, the "Fake Point" is going crazy That does not appear when i am pressing with my nails, fortunately :d
Sorry for my english and keep creating such a good applications! ;d
Any plans to work on a ..?
@TangoChen Any plans to work on a system–wide pinch to zoom solution? OndraSter has been workin' on one here, but has gone on holiday. Perhaps, you two should collaborate.
It would be great if you managed to replace the HD2's resources files and fool the entire system in thinking you actually have a capacitive screen.
The DLL (or any other kind of resource files, I didn't study this in detail, but for instance, just checking the "Pinch to zoom" menu in BSB Tweaks instantly crashes the HD ! ) could then be added in cooked ROMs and simulate the official "pinch to zoom" behavior...
thanks
that's great job
Related
I have never seen anyone ask this on any of the many posts I have read and I would like to know if their is a registry tweak or some other way to make the X button bigger? It is near impossible for large fingers to hit it and this would make it easier to use without having to get the stylus out.
I would agree with you on that one. Making one-hand use easier.
Hopefully someone has a solution...
It is not a solution but ...
you can use one of the 2 "ok" hardware buttons the phone has.
The one in the left side is the one I use the most, and once you get use to the buttons and the jog wheel, will find they are very helpfull in the one hand operation of the PDA part of the device.
Hope it can help untill someone post or find a way to get what you are looking for...
regards
mablan
mablan said:
you can use one of the 2 "ok" hardware buttons the phone has.
The one in the left side is the one I use the most, and once you get use to the buttons and the jog wheel, will find they are very helpfull in the one hand operation of the PDA part of the device.
Hope it can help untill someone post or find a way to get what you are looking for...
regards
mablan
Click to expand...
Click to collapse
Great suggestion!!!
Respect K.I.S.S. rule!
(Keep It Simple and Stupid)
Thanks
I have to admit, I don't remember about using the buttons and should get use to having them and their functions. Thanks for the tip about the two ok buttons.
But ok button don´t close programs, only minimize...
I use SPB Pocket Plus 3.2. You can assign a hardware button acting as a close button.
ezmike said:
I have never seen anyone ask this on any of the many posts I have read and I would like to know if their is a registry tweak or some other way to make the X button bigger? It is near impossible for large fingers to hit it and this would make it easier to use without having to get the stylus out.
Click to expand...
Click to collapse
Try this app called 'Magic Button' (freeware) at the link below, you can map it to an application button, it only has a 71kb footprint and therefore it will not use much valuable space on your devices memory. I have not tried it on WM6 but see no reason why it should not work.
http://www.trancreative.com/mb.aspx
boz said:
Try this app called 'Magic Button' (freeware) at the link below, you can map it to an application button, it only has a 71kb footprint and therefore it will not use much valuable space on your devices memory. I have not tried it on WM6 but see no reason why it should not work.
http://www.trancreative.com/mb.aspx
Click to expand...
Click to collapse
yes indeed magic button rawks.
Magic Button made the X bigger!
Installed this app and it's great. Currently on WM5 at the moment so can't say if it's WM6 compatable or not until I change back to a 6 rom.
ezmike said:
Installed this app and it's great. Currently on WM5 at the moment so can't say if it's WM6 compatable or not until I change back to a 6 rom.
Click to expand...
Click to collapse
Glad it was what you wanted.
ezmike said:
I have never seen anyone ask this on any of the many posts I have read and I would like to know if their is a registry tweak or some other way to make the X button bigger? It is near impossible for large fingers to hit it and this would make it easier to use without having to get the stylus out.
Click to expand...
Click to collapse
Agreed. Tapping with my index finger never works, but I AM able to hit the X button if I use my thumb with the fingerprinty side of my thumb facing out and away at an angle of about 45 degrees from 12:00 position.
I just place my finger in that position and then press down; my fingernail hits the X button spot on.
Hey,
Have been messing around with the Advanced Config Tool for a bit (http://www.touchxperience.com/en/advanced-configuration-tool/downloads.html) and I saw an option for "Finger Pressure" now, its set at a "custom" level by default, but do you think that by altering that setting I might be able to make it so that I don't have to press hard on the screen to get a reaction, like (I'm sorry) the Iphone?
Thanks in advance,
Nils
Edit:
I'm very hesitant to try it on my diamond because, well, I'm too protective of it
was wondering about this too. anybody has any idea about this..?
It's true.
But the best thing to do when you want the screen to respond when you touch it with a feather :
Re-allign your screen in 'Settings'
And when alligning, just VERY GENTLY apply force to the stylus, just press a LITTLE BIT HARDER just enough to make the cross move to the next spot.
It calibrates pressure to, I do that always when aligning.
Riel said:
It's true.
But the best thing to do when you want the screen to respond when you touch it with a feather :
Re-allign your screen in 'Settings'
And when alligning, just VERY GENTLY apply force to the stylus, just press a LITTLE BIT HARDER just enough to make the cross move to the next spot.
It calibrates pressure to, I do that always when aligning.
Click to expand...
Click to collapse
is that only a feature the diamond has? or would that work on my herald too?
I really dont know
Ok guyzz:
Only Works for GSM Diamonds.
If you want a really sensitive screen do this:
In advanced config go to:
HTC Touch Flow:
Pressure Threshold set to: 1
Finger Pressure set to: 1
Forget about the gentle stylus push on alignment of screen.
Hope all goes well let me know how it goes!
Greetings to all.
1? you sure?
wont that make it so we CANT touch the screen?
kidnamedAlbert said:
1? you sure?
wont that make it so we CANT touch the screen?
Click to expand...
Click to collapse
Im using those settings since I got the Diamond and it works great.
Give it a try its not a big deal. If you dont like it change it back to normal.
Advance config?
Sergio PC said:
Ok guyzz:
If you want a really sensitive screen do this:
In advanced config go to:
HTC Touch Flow:
Pressure Threshold set to: 1
Finger Pressure set to: 1
Forget about the gentle stylus push on alignment of screen.
Hope all goes well let me know how it goes!
Greetings to all.
Click to expand...
Click to collapse
Hi Sergio
I'd like to do what you've suggested, but I have no idea how to get to Advance config... Can you assist on how to launch it? thanks a lot
Sergio PC said:
Im using those settings since I got the Diamond and it works great.
Give it a try its not a big deal. If you dont like it change it back to normal.
Click to expand...
Click to collapse
dude its SUCH A BIG DEAL.
scrolling is so much smoother now
@CashewNuts, download advanced config here: http://www.touchxperience.com/en/advanced-configuration-tool/downloads.html
btw, the iphone senses your skin unlike our diamonds Hence why you cant use a stylus or pen or finger nail with the iphone
kidnamedAlbert said:
dude its SUCH A BIG DEAL.
scrolling is so much smoother now
@CashewNuts, download advanced config here: http://www.touchxperience.com/en/advanced-configuration-tool/downloads.html
Click to expand...
Click to collapse
I meant doing this tweak is no big deal
Glad it help you out.
Greetings
I tried this and couldn't feel a difference, that might be because I use Swift bl v7.5 which makes everything more sensitive to the touch anyway...
After i re-alligned the screen was the response a lot better then before. I use the Swift bl v7.0
Sergio PC said:
Ok guyzz:
If you want a really sensitive screen do this:
In advanced config go to:
HTC Touch Flow:
Pressure Threshold set to: 1
Finger Pressure set to: 1
Forget about the gentle stylus push on alignment of screen.
Hope all goes well let me know how it goes!
Greetings to all.
Click to expand...
Click to collapse
awesome, but how do I set it, I can only choose custom / default / very high etc. etc.
Hi Sergio
I'd like to do what you've suggested, but I have no idea how to get to Advance config... Can you assist on how to launch it? thanks a lot
Click to expand...
Click to collapse
What he ^ (Cashewnuts) said!!
Can anyone help with that?
Much obliged!
blackb1ade said:
What he ^ (Cashewnuts) said!!
Can anyone help with that?
Much obliged!
Click to expand...
Click to collapse
Seriously did you read the first post of this page...it quite clearly states in there the link for downloading the advanced config tool.
In case you cant read...heres the link:
http://www.touchxperience.com/en/ad...40-advanced-configuration-tool-downloads.html
Download the 3.2 cab then connect your phone and transfer the cab file to your phone and install it.
Thanks
Just to explain, I didn't realise that this was a seperate app. and therefore that was a link to it - was thinking it was something I simply needed to know how to access already onboard the Diamond.
itsallsubliminal said:
btw, the iphone senses your skin unlike our diamonds Hence why you cant use a stylus or pen or finger nail with the iphone
Click to expand...
Click to collapse
Let me rephrase that for you:
the diamond is not limited by having a capacitive touch screen like the iphone Hence why you cant use a stylus or pen or finger nail with the iphone
nilsk123 said:
awesome, but how do I set it, I can only choose custom / default / very high etc. etc.
Click to expand...
Click to collapse
choose custom and the dialogue comes up.
Yesterday when playing Warcraft 2 on my HTC Touch HD, I felt a need for a DPAD cuz in big maps the camera is hard to control.
So could someone make a DPAD which is compatible with WVGAFIX3 (Dpad must be shown in the black bottom area)
This could not only be good for this game but then it will open the ability to play FPS on out TOUCH HDs in VGA mode with WVGAFIX3!
cmon people!!!!!!!!
Would love it too..
This would be awesome
Vijay is working on it.
You can search a little bit in this forum to have more infos.
Now, we have all to wait.
thierryb said:
Vijay is working on it.
You can search a little bit in this forum to have more infos.
Now, we have all to wait.
Click to expand...
Click to collapse
Judging by the picture hes posted with his dpad-- hes working on a app which works in normal WVGA screen conditions at the bottom of screen.
But we need a dpad which is shown at the black bootom area of scree, when your screen resolution (with WVGAFIX3) is set to VGA(640X480)!!!!
look in the picture if you didnt understand:
the picture shows the black area and Warcraft 2 on THD
WE NEED DEVS!!!!!!
cmoon anyone, someone, please... :/
BUMP!!!!! cmooon ppl
i would love to see d-pad similar to this one from LG Arena look here:
http://www.gsmarena.com/showpic.php3?sImg=reviewsimg/lg-km900-arena-preview/sshots/gsmarena_040.jpg
it does look very neat.
A lot of us want, But no one is willing to create it...
cmoon!!!!
one hope i see its practically posiible .......
so it will be a reality soon
Just a hint: You could use something like G-Controller to use the G-Sensor as a DPAD... Tilting the HD could scroll around the map!
Don't know, if it would work well... but it's worth a try!
Is is possible to do multi-touch in HD?? Coz if it is possible, it would be excellent. Getting better than iphone OS
lunatic_silf said:
Is is possible to do multi-touch in HD?? Coz if it is possible, it would be excellent. Getting better than iphone OS
Click to expand...
Click to collapse
In short, no.
jake_tenfloors said:
In short, no.
Click to expand...
Click to collapse
Thats not correct because somewhere here on the forum I have seen a gameboy emulator software for the Touch HD with Multitouch support and all people says there that it works perfect!
If I´ve time I´ll look for a link to this thread later!
jake_tenfloors said:
In short, no.
Click to expand...
Click to collapse
There are some pseudo multi-touch apps out there that mimic the effect of multi-touch:
basically if you pressed both edges of the screen windows records a keypress somewhere in the middle
so if you had a four way d-pad arrangement with a couple of fire buttons you can 'sort of' emulate multi-touch by capturing a press that registers inbetween say the up and fire button.
see here:
http://forum.xda-developers.com/showthread.php?t=489147
i have even managed to reproduce this simple behaviour in a .net test app.
i also read an article where the hardware of the G1 (yes i know that not a touch HD) was multi-touch capable but the device driver for the screen was not and some clever chappy was attempting to write a driver that would give the point pressed and a radius allowing the 'pinch' style zoom gesture of the fruitPhone.
and if you google for that there are several other even more successful attempts at bringing multi-touch to the G1.
it seems that with that phone the initial limiting factor was actually the OS not supporting multi-touch
winMo also does not support multi-touch....
so this begs the question is the HD hardware capable with a little device driver / OS hacking ???????
anyone????
The game emulator only simulates multi-touch by averaging the point between your two touches. So touching the left side of the screen and the right side of the screen registers as touching in the middle of the screen.
This works for the game emulator (Morphgear is the one they've done this with) because you can make virtual game pads that have hidden buttons. So touching on the virtual up button and touching the virtual A button registers as touching in between them allowing you to have a hidden virtual button at that spot that does the up+jump action.
It's not real mutli-touch, but very well done and handy for that specific purpose.
edit: Beat me by seconds, purec0de
silf there is the search function anyway eh
I know that it is kinda possible, but you've all said "emulates" & "simulates". Thus it not true multi touch like the iphone.
Please remember this is the same guy asking if we can install OSX on the touch HD.
So far, the answer is a simple "no" (e.g.: ditto to jake_tenfloors)
Remember that the HD has a resistive screen whereas the iPhone has a capacitive screen.
There are rumours of companies developing drivers and software packages to get a true multi-touch for resistive screens, however, Windows Mobile 6 (including 6.1, 6.5) doesn't have support for multi-touch.
So unfortunately for us HD users (or Diamond or devices without hardware buttons), we'll have to make do without.
why would you want to install osx on the hd. would you not just buy an iphone or as so perfectly described in a previous post, fruitPhone.
purec0de said:
so this begs the question is the HD hardware capable with a little device driver / OS hacking ???????
Click to expand...
Click to collapse
Simply: No.
dlaponin said:
why would you want to install osx on the hd. would you not just buy an iphone or as so perfectly described in a previous post, fruitPhone.
Click to expand...
Click to collapse
Coz iphone has terrible hardware specification compare to HD.....
lunatic_silf said:
Is is possible to do multi-touch in HD?? Coz if it is possible, it would be excellent. Getting better than iphone OS
Click to expand...
Click to collapse
No, however I made proof of concept software which emulates some multitouch features on any single touch screen. You can zoom in/out by pinching as well as rotate objects. It can also recognize whether you are touching with just one finger or two. So for example you can pan picture around with one finger and skip to next picture if you drag it with two fingers. This is not hw specific and works on ANY single touch device, including touchpad on your laptop and various touch screen computers.
mcano said:
No, however I made proof of concept software which emulates some multitouch features on any single touch screen. You can zoom in/out by pinching as well as rotate objects. It can also recognize whether you are touching with just one finger or two. So for example you can pan picture around with one finger and skip to next picture if you drag it with two fingers. This is not hw specific and works on ANY single touch device, including touchpad on your laptop and various touch screen computers.
Click to expand...
Click to collapse
any chance of posting this for us to play with??
+1 I too would like to have such a thing, even if its only for album.
hi mate i agree with purec0de...is there a chance of posting this simply because it sounds like a very nice piece of software and we would be very grateful if you choose to share it.
thx in advance if u plan to post
I too wrote a limited multitouch (MT) demo but the problem was how to map it into existing programs... there are no standard event handlers for MT in current WiMo... this changes with WiMo 7.0 next year. Bottom line you can write a custom application that does a pretty good job of acting like its MT but it is a stand-alone application (read: does not integrate with HTC Album etc)
Please post this multitouch Demos... it would be realy nice to test it
this one is on android but single touch device:
http://www.youtube.com/watch?v=e7jgOibdIfM
htc hero multi touch:
http://www.youtube.com/watch?v=3AgEjBIt1d8&NR=1&feature=fvwp
and im sure this dell is not multy touch:
http://www.youtube.com/watch?v=icOMJuuWePY
PLZ IF you find me a program or hack or browser that working on this trick on my Xperia x1
the trick is based on this : http://www.youtube.com/watch?v=y2HD3fUEKO8
after a big research i found the perfect program that can do the trick Iswish - http://www.youtube.com/watch?v=0vPt7Mdm6vk
it have the ability of pinch to zoom
the problem is that i cant fond the download any of the versions...
plz find it!!!
He moves only one finger, so it's possible with some cleaver programming
3D-GRAF said:
He moves only one finger, so it's possible with some cleaver programming
Click to expand...
Click to collapse
i know that why i ask for any one to make a smart program!!!i think that program save the 1st touch then go to the second and x2 the middle kinda complicated
BUT SHOULD WORK
To my knowledge, some apps actually already use this technique. When you press two points on a screen, it takes the coordinates exactly in the middle and "presses" that. It doesn't work with a screen full of buttons though, as there might be another button where the "dummy" press occurs.
Angelusz said:
To my knowledge, some apps actually already use this technique. When you press two points on a screen, it takes the coordinates exactly in the middle and "presses" that. It doesn't work with a screen full of buttons though, as there might be another button where the "dummy" press occurs.
Click to expand...
Click to collapse
which apps plzz tell me
i think if some one can make a program that save the 1st touch then the others will be the zoomand if the 1st spot is far from the middle and getin closer so its zoom out
HMMMM
dxdiadora said:
which apps plzz tell me
i think if some one can make a program that save the 1st touch then the others will be the zoomand if the 1st spot is far from the middle and getin closer so its zoom out
Click to expand...
Click to collapse
Well....we know that Opera doesnt...and IE and Skyfire and so on....
Seems like those would be the only relavent apps right?
i mean for me the multitouch would be the most usefull in web browsing...not so much in any other programs...
acidbath5546 said:
Well....we know that Opera doesnt...and IE and Skyfire and so on....
Seems like those would be the only relavent apps right?
i mean for me the multitouch would be the most usefull in web browsing...not so much in any other programs...
Click to expand...
Click to collapse
For me its important too so plzz any one hack it or get at least 1 app that uses this trick it'll be the most useful app
ALL MULTI TOUCH APPS ARE WELCOME!!!
Jees. Calm down.
Yeah, you're getting a bit hyped there. Perhaps its time for you to get another phone?
Anyway, there was a GBA emulator around which used that, since you wouldn't be able to press both movement and something else at the same time. I have no idea where it is though - was months ago I saw it.
jea got this GBA prog but never played on touchscreen, opera with multitouch would be very fine, but the display of the xperia x1 is to small for that aktion by using fingers... thats my point of view, but i thougt that the hardkeyboard is to small to type, too. and i was wrong
so it would be a nice gag to get opera browser with multitouch function..
Angelusz said:
Yeah, you're getting a bit hyped there. Perhaps its time for you to get another phone?
Anyway, there was a GBA emulator around which used that, since you wouldn't be able to press both movement and something else at the same time. I have no idea where it is though - was months ago I saw it.
Click to expand...
Click to collapse
can u plz tell me the name of that GBA emulator (i have meeboy emulator only gameboy color not advence)
NOTHIng metter just plzz share it or its name plzzz i soo need to have it
dxdiadora said:
can u plz tell me the name of that GBA emulator (i have meeboy emulator only gameboy color not advence)
NOTHIng metter just plzz share it or its name plzzz i soo need to have it
Click to expand...
Click to collapse
No. Instead I'm going to ask you to read my post again: please read my post again.
how did you find it >>>> in that way find it again plzzzz i can google it for you and u tell me ok?windows mobile gba
Hi!
Please be careful not to make people crazy about a resistive touchscreen, to become a real multitouch with a piece of software.
A resitive touchscreen like on the Xperia is not like the capacitive ones.
There is simply a physical limit.
Please get yourself a little background about these technologies.
When you press two points on a screen, it takes the coordinates exactly in the middle and "presses" that.
Click to expand...
Click to collapse
Angelusz is absolutely right. Nothing more nothing less!
With a resisitive touchscreen, you can sample only one "touch" at one moment in time.
It doesn't work with a screen full of buttons though, as there might be another button where the "dummy" press occurs.
Click to expand...
Click to collapse
I won't doubt that some tricky programmers may use the effect, to get something like a multitouch feeling, but the real UI will never behave like it does e.g. on an iphone.
Please slow down dxdiadora
Regards,
scholbert
scholbert said:
Hi!
Please be careful not to make people crazy about a resistive touchscreen, to become a real multitouch with a piece of software.
A resitive touchscreen like on the Xperia is not like the capacitive ones.
There is simply a physical limit.
Please get yourself a little background about these technologies.
Angelusz is absolutely right. Nothing more nothing less!
With a resisitive touchscreen, you can sample only one "touch" at one moment in time.
I won't doubt that some tricky programmers may use the effect, to get something like a multitouch feeling, but the real UI will never behave like it does e.g. on an iphone.
Please slow down dxdiadora
Regards,
scholbert
Click to expand...
Click to collapse
thnx for the information about multitouch but can u plz think about my idea :
to make a prog that:
1.take your first touch save it while you still thouching it you touch somewhere els and "it presses the middle of them " then if you move your finger then the middle moves and the prog will chek if it is closer to the 1st point that he saved so it zoom in the first point you pressed
i know that it cant be like iphone but plzz can u try this trick?? ill be so pleased
thnxxx for helping anyway
As far as I know. and I am really sure about this.. You cant use Multi touch on the x1. like. never unless you changed the touch panel on the phone it self or something like that.
[EDIT]
You know what?? I've decided to shut up. it's a shame really that op is making such a big deal out of this crap. multitouch on resistive? ok.
now cool down a bit, otherwise You may jizz in Your pants...
problem with your idea is that, it doesnt see the first finger placement, the sensors are in the corners , so it doesn't tell where you press, but the dead center of pressure, and it counts that as one press, not two separate finger positions. That being said, there is no possible way for it to save the first press, because the first press doesn't actually exist
iswish
can some1 find the software any cab of this iswish please
i realy want the pinch to zoom !!!!!
Check this http://forum.xda-developers.com/showthread.php?t=593290
And oh how close to home
SEARCH!!
booya