Develop Bugs

screen protector for galaxy tab

I just purchased one on amazon from ArmorSuit. Gotta be one of the best screen protectors out there. Way Way better then skinomi and the majority that is out there. 5/5 stars. Just my honest opinion. Want to help out those who are looking for something of quality. Go ahead and give it a try, you wont regret it.
amazon.com/gp/product/B0055851VA
Also want to say that their customer service is top notch. Love it.

Just got my Armor Suit and it is the best screen protector I've ever used. 5 stars.
Sent from my LG-P999 using XDA Premium App

Is invisible shield just not good anymore?

I think I'll try this Armorsuit...I just received the SGP screen protector....suck and overpriced..lucky I got it from Amazon...easy return service....

I got the Steinheil Ultra Crystal (SQ) and the fit (some air around the camera) and quality is really good (been using Steinheil screen protectors for years on my phones). I got my from Amazon.com and its kinda expensive but its like $21/year =).
This isn't the place I got my, but you can see all the different types.
http://cretouch.com/samsung-galaxy-c-210_238.html

couldn't find one here, hence bought a notebook screen protector and pruned it for perfect fit on my galaxy tab plus used the remnant for my phone.

I'm worried if I put an Invisibleshield screen protector on my GT 10.1 it will leave a permenant haze or film on the the screen when I decide to take it off. Can anyone offer any information? Thank you

I got this.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140566290274&ssPageName=STRK:MEWNX:IT
3x screen protectors for $10 shipped. They're matte. Fit almost perfect (1mm smaller than the actual glass to prevent lifting).

I dont see any reason for a screen protector other than wanting to have a matte screen to remove the glare.

5thElement said:
I dont see any reason for a screen protector other than wanting to have a matte screen to remove the glare.
Click to expand...
Click to collapse
Most of us actually prefer our screen (gorilla glass or not) scratch-free. Having a protector gives you ease of mind when rubbing a smudge or fingerprint off too.

Itaintrite said:
I got this.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140566290274&ssPageName=STRK:MEWNX:IT
3x screen protectors for $10 shipped. They're matte. Fit almost perfect (1mm smaller than the actual glass to prevent lifting).
Click to expand...
Click to collapse
I just installed that exact same one from the same seller. Fits perfectly, especially around the camera and ambient light sensor. It adds a little bit of a grainy texture to the display, but all anti-glare films I've used do that. Not sure if it's really got an anti-grease / oleophobic coating as mine has some decent fingerprints, but the matte surface hides it well.
Tip to line it up the first time: before you take off the backing, line it up how you want it. Scotch tape it 3x on one of the edges, preferrably the one with the pull-tab for the backing. Make a tape handle for the opposite end of the screen. When you're ready to install it, hold the tape handle and pull the backing off with the tab, then pull the handle tight as you lay down the protector.

Trust me, I went through at least 7 different screen protectors (I got the Asus, Acer, and Samsung) and this is by far the best one out there. Good luck.

sabor504 said:
Trust me, I went through at least 7 different screen protectors (I got the Asus, Acer, and Samsung) and this is by far the best one out there. Good luck.
Click to expand...
Click to collapse
How does it stack up against InvisibleShield and the other 3M Scratchguard types? I usually don't like the texture on those.

Don't know about the ones I've been hearing about in this thread, but I've got InvisibleShield on my Galaxy Tab 10.1 and I'm probably never taking it off. It works wonders and I have the same protector for my HTC Evo. Never need another screen protector once you go InvisibleShield.

I myself have been searching for a screen protector for my tab. I have the invisishield on my evo4g, and I find that it adds quite a bit of sticky friction to swiping, or any time you drag your finger across the screen. It's not so important on the phone as it would be on the tab, so here's my question:
What sp will offer some protection, but doesn't add much friction to the touch experience.
Appreciate the input!

nottechspecd said:
I myself have been searching for a screen protector for my tab. I have the invisishield on my evo4g, and I find that it adds quite a bit of sticky friction to swiping, or any time you drag your finger across the screen. It's not so important on the phone as it would be on the tab, so here's my question:
What sp will offer some protection, but doesn't add much friction to the touch experience.
Appreciate the input!
Click to expand...
Click to collapse
The one I mentioned above is smooth. The matte finish makes it feel more like high gloss paper than glass. I'm considering buying a clear protector from the same company though as the "sparkly" effect that the matte finish adds to the screen (esp. things that are solid green for some reason) is getting on my nerves.

I have the zagg invisibleSHIELD maximum protection, is was a little skeptical at first but really like it now the i have had it on for a coupke weeks. There is more grip to the tablet now, but i can still slide my fingers over the screen with no issues. I will say this though, if you have never installed something like this take your time whrn installing it.
Sent from my GT-P7510 using XDA Premium App

Apologies if it has already been asked, i may have missed it.
I'd like to have a specific anti-glare screen protector, the glossy screen is not bad but still very reflective, a part from the usual fingerprints issue.
Any product that suits my needs?
Tia

Try the matte screen protector from SGP

kelvintwc said:
Try the matte screen protector from SGP
Click to expand...
Click to collapse
thanks man, appreciated.

Recommend a screen protector!

I need a screen protector for my Galaxy SII i9100 because I do not want to damage the screen. It should be a pack of 2-3 because I almost always mess up the first time.
It doesn't matter if it is glossy or matte, both are fine, but I am in the sun a lot so I should be able to still see the screen. Preferably something which gets rid of finger oils easily.
I live in USA, so Amazon or Ebay would be excellent.

I am using the Steinheil Ultra Series Screen Protector Films for my AT&T phone, the Ultra Crystal. It comes in a pack of 2. It was very easy to install, no bubble.
It keeps my screen scratch free and I still have the super nice clarity of the original Samsung AMOLED Plus screen.
They even have video to show you on how to do it on youtube or their website (sgpstore.com). There is no fingerprints issues with this Crystal version, you can just use their supplied Micro-fiber fabric and they go away.
You can buy them on Amazon for $13.99. The Ultra Optics which costs $2 more would be my other preference but it did not exist for my AT&T model.
Or you can try the Ultra Oleophobic which is oil resistant and is $13.99.

I use basic screen protector from ebay and work fine...

Phantomskinz - doesnt have the tacky/sticky feel (whilst offering same protection) of e.g zagg invisibleshield.
Google for discount code.
Sent from my GT-I9100 using Tapatalk

This is the best all around screen protector for the SGSII no doubt.
http://www.mobimega.com/sgp-steinheil-ultra-oleophobic-screen-protector-for-samsung-galaxy-s2.html

I would go with a 3M Estoc+ if budget allows.

Try the SGP Glas, although not fingerprint resistant, its a great screen protector which is made of real glass and is shatter-proof in case you drop it or hit it against something. The video on the website, the guy had to use a hammer and hit it twice to destroy it, but its not like you're gonna hit your phone with a hammer any day ^_^
http://www.sgpstore.com/cell-phone/...g-galaxy-s2-screen-protector-glas-series.html
ah, one more thing, when using this screen protector, you have to install the Ninphetamine kernel, due to the charging bug, where the screen is undervolted, the touches on the screen are not detected unless you install the kernel, which tweaks the voltage going through the screen, and the physical touches are being recognized. Other than this, it's a great screen protector + no worries of bubbling!

nicholaschum said:
Try the SGP Glas, although not fingerprint resistant, its a great screen protector which is made of real glass and is shatter-proof in case you drop it or hit it against something. The video on the website, the guy had to use a hammer and hit it twice to destroy it, but its not like you're gonna hit your phone with a hammer any day ^_^
http://www.sgpstore.com/cell-phone/...g-galaxy-s2-screen-protector-glas-series.html
Click to expand...
Click to collapse
It's not so much the glass being broken, more the glass being scratched. Which, despite being Gorilla Glass, is still quite easy to do (I have a tiny scratch on mine despite looking after it and never having it in my pocket with anything else for example).

Pagnell said:
It's not so much the glass being broken, more the glass being scratched. Which, despite being Gorilla Glass, is still quite easy to do (I have a tiny scratch on mine despite looking after it and never having it in my pocket with anything else for example).
Click to expand...
Click to collapse
This is exactly the reason as to why I wussed out on gorilla glass and installed a screen protector

I just got the SGP Ultra-Fine and I'm very satisfied with it.
Very easy to install, no fingerprint, no glare.

Get the cheapest top rated ones you can find on amazon. I was tempted to buy an expensive one, glad I didn't. I got 6 cheap ones for £3. First one went on perfectly, it's not even scratched up, but when it does, there are 5 more to easily replace it with. Not necessary to spend tons on these, you end up paying for the brand.

I'm happy with my SGP Ultra Optics protector. Since you're in the States shipping will be negligible as well. It's a dry install, I've even removed it, and put it back on to get the alignment perfect without issue.
I've tried two "wet install" protectors: Zagg (Invisible Shield) and Ishieldz, both were not even remotely worth the cost and it results in phone downtime to ensure that everything is dried out after the install. Of the two Ishieldz was the better.

Im surprised nobody mentioned InvisibleShield or iShieldz. I personally believe they provide superior protection (especially the InvisibleShield, check out the videos section of their website).
Both come with LIFETIME warranty.
EDIT: Oops, didnt read the post above me. But I've NEVER had any issue with applying InvisibleShield or iShieldz. I had an invisible shield on my X10 and was able to take keys the the screen without any damage at all and installation was a breeze. I currently have an iShieldz on my SGSII.
I prefer wet installs to dry as it is much easier to make sure everything is lined up straight before finalizing the process.

BULL3TPR00F said:
Im surprised nobody mentioned InvisibleShield or iShieldz. I personally believe they provide superior protection (especially the InvisibleShield, check out the videos section of their website).
Both come with LIFETIME warranty.
EDIT: Oops, didnt read the post above me. But I've NEVER had any issue with applying InvisibleShield or iShieldz. I had an invisible shield on my X10 and was able to take keys the the screen without any damage at all and installation was a breeze. I currently have an iShieldz on my SGSII.
I prefer wet installs to dry as it is much easier to make sure everything is lined up straight before finalizing the process.
Click to expand...
Click to collapse
Invisibleshield has a tacky sticky feel to it, which is why i use PhantomSkinz which doesnt.
Sent from my GT-I9100 using Tapatalk

i would just buy a pack of 5 from ebay...cost a few dollars

I use SGP ultra optic. it's the best!

I have been using SGP GLAS for a week and love it. Since it's real glass, it feels like there is nothing there. In fact, it has a smoother feel than the touchscreen glass.
Installation instructions must be followed explicitly, but once installed, it's great.
It's pricy at 32USD$, but worth the investment in my view.

is there actually a difference between those cheap no-name ones you can buy for $1, and branded ishield/skinomi/whatever?

mudferret said:
I'm happy with my SGP Ultra Optics protector. Since you're in the States shipping will be negligible as well. It's a dry install, I've even removed it, and put it back on to get the alignment perfect without issue.
I've tried two "wet install" protectors: Zagg (Invisible Shield) and Ishieldz, both were not even remotely worth the cost and it results in phone downtime to ensure that everything is dried out after the install. Of the two Ishieldz was the better.
Click to expand...
Click to collapse
Just to add to this; when I ordered my SGP case it came with an Ultra Crystal protector, I also ordered the Ultra Optics protectors. Was time for a screen protector change so I installed the Ultra Crystal since it was all I had left. Not pleased at all, magnified finger prints, but more importantly touch sensitivity was awful. Of the two Ultra Optics is much, much better, it just doesn't look as crystal clear and shiny as the Ultra Crystal one.
Put on a Belkin protector today, sensitivity is back. It has a similar optical quality and finish to the Ultra Crystal, hopefully it doesn't show finger prints as easily. It's not as custom cut as the SGP protectors however; the hole for the home button is open at the bottom rather than surrounding the button.
EDIT:
Belkin = fingerprint hell. Touch sensitivity was markedly better, but finger print residue was WORSE than the Ultra Crystal; so bad that it was hard to view the screen. I just tore the bloody thing off.

Sgp oleophpbic. I use the ultra crystal and after. 3 months I have to search for marks and even then barely find them. However oil from my fingers is the biggest hassle. I would trade a few scratches for less oil. Sgp ultra capsule is the one to get case wise. Full protection, screenguard included, slim, and no, just no, cheap Amazon screen guards are not the same. At all. Not a bit. Used them and they are a waste of money.
Sent from my GT-I9100 using xda premium

Atrix screen protector

I've been considering getting a screen protector for a while now. The problem I have is my hands sweat very badly (gross I know) and then the touch screen on my phone goes crazy from the water on the screen. I have never had this problem with any phone I've had before now. I think it is because the Atrix touch screen is more sensitive than any other phone I've had. I was wondering if a screen protector would fix this problem and what some good brands were to try. Thanks
Sent from my MB860 using XDA App

You should always have a screen protector on any smart device you care about. One grain of sand in your pocket can ruin your screen (and your day). That said....
A screen protector will likely NOT fix your problem, as water (sweat) registers as a capacative touch. For a screen protector to "fix" the registration of sweat, it would have to also "fix" the registration of a desired capacitive touch (finger, stylus, or otherwise).
The only manner in which a screen protector could help is if you could find a very hydrophobic one (the repells and beads water), though you would still need to soak up that water with your shirt or a handkerchief or something. I'm not sure they even sell these. Google is your friend, here. Use keywords hydrophobic and/or water-repellent. Good luck, my friend, and let us know if you find anything interesting!
-omni

I tried few of a kind and decided to go with Otterbox Defender case which has a transparent front panel.
Refurbished case is about $20-25 and as good as a new one.
No need for screen protector. No mess with applying one...

What if I put on an average screen protector and then sprayed it with some form of water repellent?
Sent from my MB860 using XDA App

jadwv2210 said:
What if I put on an average screen protector and then sprayed it with some form of water repellent?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Water repellent spray wouldn't work because the screen protectors are vinyl or polyurethane and are not absorbent. Those hydrophobic sprays only work with an absorbent material like cloth or real leather.

Use car wax, something like the rain-x.

jamesc760 said:
Use car wax, something like the rain-x.
Click to expand...
Click to collapse
That's what I was talking about. It works on car windshields so it should work on a screen protector right?
Sent from my MB860 using XDA App

jadwv2210 said:
That's what I was talking about. It works on car windshields so it should work on a screen protector right?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
only one way to find out...!

I have to disagree with the statement that you have to have a screen protector, we have gorilla glass! I have never had a protector and my screen looks great! As for this situation, a protector that has a little rubberized feel might work well. I would read reviews on Amazon and buy the one that people complain the most about it sticking!
Sent from my MB860 using XDA App

FWIW, my wife has been w/o a screen protector since April and I've been with / without one on and off since June.
Still not a single scratch on either phone, however, without one the screen is too smooth, so I'm thinking of going back installing one.
Hope this helps...

I went without a screen protector for a few months. I took the phone outside and noticed TONS of very fine scratches. You could only see them in direct sunlight, but it bothered me enough that I got a screen protector shortly thereafter.

I was thinking to buy a Vikuiti ADQC27. Has anyone tried it?
Thanks

I have to second the rec for the Otterbox Defender case. Having the screen protector built in is pretty awesome and in my experience, it has withstood all kind of liquidy stuff on it and plenty of goopy stuff as well. Like those technical terms?
It hasn't hampered my touch screen through various roms with various sensitivities and my glowing review hasn't even hit all the protection benefits it gives.
Best part? I got mine for about $10 'used' on ebay and while the silicone part was a little loose, a quick email to Otterbox got me a free placement in the mail without any hassle.
I haven't used one myself, but if they make one for the Atrix and if it's what you are really looking for, Zagg stuff has made some of my friends really happy.

You should look into a Matte one where is almost smudge free
altho it looks slightly foggy and scratch easily, but its worth it
make sure u get like a few togehter on ebay so you have backup ones

I have to second the rec for the Otterbox Defender case. Having the screen protector built in is pretty awesome and in my experience, it has withstood all kind of liquidy stuff on it and plenty of goopy stuff as well. Like those technical terms?
It hasn't hampered my touch screen through various roms with various sensitivities and my glowing review hasn't even hit all the protection benefits it gives.
Best part? I got mine for about $10 'used' on ebay and while the silicone part was a little loose, a quick email to Otterbox got me a free placement in the mail without any hassle.
I haven't used one myself, but if they make one for the Atrix and if it's what you are really looking for, Zagg stuff has made some of my friends really happy.
Click to expand...
Click to collapse
I was looking for something less "bulky"
You should look into a Matte one where is almost smudge free
altho it looks slightly foggy and scratch easily, but its worth it
make sure u get like a few togehter on ebay so you have backup ones
Click to expand...
Click to collapse
Can you suggest any brand? Something like the GreatShield Ultra Anti-Glare (Matte)?

I have one on mine, steinheil (SGP), while the protector gets scratched its better than the screen getting scratched.
Can't really tell the SGP ultra crystal protector is on the screen either, other than the few scratches that are on the protector now. Comes with 2 in a package if you get them.
They have an oleophobic one that is suppose to be oil resistant, maybe that one might be ideal? The ultra fine is their matted one.
If you look at the product on their webpage the 'Select a Color' changes the type of protector they have (took me a min to find the different versions they had when I looked again).
Last while the corning glass is tough, with a vickers hardness of 622kgf/mm2 in the unstrengthened and 701 in the strengthened stuff is pretty impressive.
Spec sheet for the glass can be found from corning's site using a google search, made me curious to check it.
While pretty hard something as simple and common as sand can scratch it which has a vickers hardness of about 1000....
Keys, lighters and the like are unlikely to scratch it though as unless its hardened tool steel its hardness will likely be below 650, an edge on a tungsten ring could probably do the trick though.
Anyhow I keep one on my phone, though maybe not really necessary I'd rather have a scratched screen protector than see the glass get scratched.

I'd rather have a scratched screen protector than see the glass get scratched.
Click to expand...
Click to collapse
I am of the same mind.
Thanks for the opinion.

beaver6d9 said:
I haven't used one myself, but if they make one for the Atrix and if it's what you are really looking for, Zagg stuff has made some of my friends really happy.
Click to expand...
Click to collapse
Zagg and Skinomi are quite nice. I like the Skinomi on my tablet maybe even a bit better than the Zagg on the Atrix, but the difference is very minimal. I'd say the Skinomi may slide slightly better than the Zagg, but you're splitting hairs.

I agree with BeakHill. SGP is great except they scratch easier than Zagg. The Ultra crystal is so clear that they don't even have a cut out for the front camera. The Ultra fine is their matte model and it is good and smooth, the crystal is nicer IMO..
The problem with SGP is they spoil you to the other brands, and they are more expensive.

ive always put a total body skin on my phone in addition to a case
http://www.bestskinsever.com/motorola-atrix-4g-skin

Screen Protectors

any tips or tricks to putting the screen protectors on without getting bubbles or dust and lint sticking to adhesive side of protector?

If and when you place your screen protector and notice a finger print or lint, you can repair it. I use clear packing tape, cutting two strips about 1/2" wide. Place one on the top near (but not over) the area you are working with. This is used to lift the protector so you can get under it to where the problem is. Then slip the second strip under the protector, facing up or down depending if the problem it on the protector or the glass. I do it one way then the other for good measure. Once the tape is in place, lower the protector, press on the area, raise the protector, remove the piece of tape under the protector, then lower the protector to see if the blemish is gone.
Repeat where needed. Remove the piece of tape on the top by holding the protector beside the tape, and pulling the tape off the top.
This will remove fingerprints underneath the protector whether it is on the protector or the glass. It will also remove dust, fibers, etc.
It is entirely possible to place the screen protector where it is straight and without anything caught underneath, but I have used this method many times.
If you would like to see the process, search Youtube for "removing lint from under screen protectors".

I'm lazy -- I took mine to BestBuy and had them do it. It cost around $12, but they did the job right. I always seem to screw up when putting them on myself.

there is no need to "protect" the screen
http://www.youtube.com/watch?v=ivxlsNLi-9s
only good if protector is fingerprint resistant

danij3l said:
there is no need to "protect" the screen
http://www.youtube.com/watch?v=ivxlsNLi-9s
only good if protector is fingerprint resistant
Click to expand...
Click to collapse
I agree, it makes no sense to use a screen protector on something that has Gorilla Glass like the KF does, other than fingerprints or possibly a privacy screen protector.

I purchased the Skinomi from Amazon. It did not really help with fingerprints like I had planned, nor did it look very good on the screen - contrary to the Skinomi I have on my iPhone 4...

My fire got a light scratch on it in about a week. Never dropped, lived in its case, babied.
Get a screen protector.
(I am anal and hate even the smallest defect. It was indeed a small scratch only noticeable in certain light, but was a scratch.)

brett10 said:
I agree, it makes no sense to use a screen protector on something that has Gorilla Glass like the KF does, other than fingerprints or possibly a privacy screen protector.
Click to expand...
Click to collapse
I disagree. I have Gorilla Glass on my Samsung Epic 4g which survived the same type of 'demonstrations' showed in that video. Not wanting to impact the beauty of the screen (touted as one of its primary features when the phone came out), I left mine unprotected. However, after less than a year of use, there are still a significant number of scratches on it, and even one 'chunk' missing that is visible from all angles.
Came here to see if anyone recommended a specific brand over another. While the anti-glare screens sound nice, I have also read that it impacts viewing in a negative way - sounds like something I don't want for a device designed for reading. Therefore I figured I'd stick with a clear protector, but was looking for reviews.

I've always loved and used the SGP Steinheil Ultra Crystal.
[I'll add link later]
The anti-fingerprint ones they sell are junk. They really muck up the screen. But the ultra-crystals are great and provide another layer of protection. I haven't installed mine on my Fire yet, but I will once I get around to it.
Though Gorilla Glass is amazing stuff, it is not scratch-proof. I'll continue using screen protectors regardless of what type of glass.

Interesting. I have a 2 year old Incredible with a perfect screen and never used a screen protector. I must be the most careful person on earth.

.46caliber said:
The anti-fingerprint ones they sell are junk. They really muck up the screen.
Click to expand...
Click to collapse
Agree and disagree. While it does hinder the quality a tiny tiny bit, I personally love the feel of the matte surface while reading a book. That, combined with anti-glare, make the clear protectors utterly useless to me. If I'm reading / watching anything, I certainly don't want to have to tilt the device to get rid of glare to see the screen clearly.
I bought the Acase matte screen protectors and absolutely recommend them to anyone. 3 pack for $12.99 shipped on Amazon. (Girlfriend loves them too)

I have an XO Skin on my Nexus and love the look of it. You really can barely tell its there and it helps a ton with the finger prints. They make one for the Fire as well: http://xoskins.com/amazon-kindle-fire-screen-protector
Be aware that this is a wet applied protector. I find the best way to apply them is the steam up the bathroom really well for a few minutes, then turn the water off for a few minutes to let any dust in the room settle. Then do a really good wipe down of the screen with a non lint towel and blow it completely clean with compressed air.
When applying the protector, use a lot of the application liquid, on the protector and your fingers.

I just installed a Skinomi protector. Still waiting for it to dry and all, but as far as I can see I removed pretty much all of the bubbles. It was around 9 bucks shipped, came well packaged with clear instructions and a lifetime warranty. As long as it the picture quality isn't disturbed, I think it's going to be a winner.
I do want to try one of those matte protectors now though...

After dealing with cheap screen protectors I ordered a couple different well reviewed protectors.
I got the armorsuit militaryshield.
It installed great, but had to apply it wet (which i don't like) and let sit for 12 hours.
It turned out very nice, you really couldn't tell it was there besides very minor screen distortion. I really didn't like how it felt, a little sticky.
I had to rma that kindle and couldn't save the shield.
So I got a greatshield ezseal
If you're looking for a protector this is the one to get.
Best protector Ive ever used.
Its basically just like the moshi ivisor for ipad.
It doesn't stick to the screen, the adhesive is on the outer edges and it basically lies on the screen -so no bubbles. you can even take it off and wash it.

I tried the Acase matte screen protectors on Amazon and they looked awful. They mute the color palette and give everything a fuzzy look. Tried the Acase clear screen protectors instead and they worked out fine. Can't see the fingerprints and the screen still looks good.

yeah matte will make it a bit fuzzy/greasy looking
the ezshield is matte

Got this:
http://www.amazon.com/gp/product/B000ALDUFG/ref=oh_o00_s00_i00_details
BoxWave Amazon Kindle Fire ClearTouch Anti-Glare Screen Protector
I really like how it fits, it really make the display look better.
Don't really care about scratches, but the reflections on the KF can be pretty annoying outside.
It's not really anti-Fingerprint but it's way more easy to clean.
It's also reusable.

I thk a screen protector is ideal if your banging it around or throwing stuff of it but other than theres no reason to really.
ive only had i protector on 1 one the phones ive had, all the rest of the stuff I dont have any SP on them.
I have never had any prob with the screen getting scratched.
---------- Post added at 02:20 PM ---------- Previous post was at 02:18 PM ----------
If I could find something that would let me see the screen in the sun now that would be worth it. LOL

Is it making the screen use better outside then? And what about the use inside?
Sent from my MIUI.us Sensation 4G using XDA App

I'd definitely speak against screen protectors; I purchased a highly rated myGear one with my Fire and noticed that though fingerprints didn't seem to appear as easily, they were almost impossible to wipe off completely. It also noticeably detracts from what is such a good screen.

Screen Protector Discussion Thread

Hi everyone. I searched the forums for screen protectors, and what I found was a whole lot of threads on various screen protectors out there, but nothing centralizing these discussions. So I thought I'd create this thread.
1. What type of screen protector do you use?
2. How has it held up?
3. Have you gone without a screen protector?
4. If so, do you have any scratches?
5. What's the most you have paid for one?
6. What's the cheapest you have paid for one?
7. Any Rants? Any Raves?
8. Any you would recommend?
9. Any you would want to try?
10. Any tips to putting certain ones on?
Let's help each other out by sharing our knowledge on screen protectors for the HTC One.

Top screen protectors according to you guys.
1. Mime Feather Glass Screen Protector - $27.95 http://mimeusa.com/product/htc-one-feather-glass-tempered-glass-screen-protector/
2. Zagg Clear HD Screen - $19.99 http://www.zagg.com/invisibleshield/htc-one-cases-screen-protectors-covers-skins-shields
3. Verizon 3 Pack Anti-scratch Protectors - $12.99 http://www.verizonwireless.com/acce...-protectors-3-pack-w-screen-wipe-for-htc-one/
Installation videos
1. Android Authority demonstrating how to install wet and dry screen protectors such as the Zagg and ScreenWear http://youtu.be/sf0a-c7WH8U
2. Danny Winget demonstrating how to install a glass screen protector such as the Spigen Glass http://youtu.be/F4_wtcmWVv4
Reviews via Amazon
1. Zagg HD http://www.amazon.com/ZAGG-HDHTCM7S...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
2. Zagg Original http://www.amazon.com/ZAGG-HTCM7S-i...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
3. Mime Ghost Glass http://www.amazon.com/MIME-Tempered...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
4. AmFilm http://www.amazon.com/Protector-Inv...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
5. Tech Armor http://www.amazon.com/Tech-Armor-De...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
6. Skinomi http://www.amazon.com/Skinomi-TechS...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
Drop Test
1. Zagg Shield drop test http://youtu.be/NxcUMZ4bTCM
2. Tempered Glass drop test http://youtu.be/33T1Qun7jsQ

Zagg HTC One High Def Screen Protector - Amazon
I think Zagg makes the best screen protectors, I have used them on both the HTC Droid Incredible and the HTC One. The Zagg screen protectors are not the cheapest option for screen protectors especially if you go for the ultra clear model but I think the cost is worth it, especially since zagg offers warranty replacements, you only pay for shipping. With the warranty replacements, registering your product on the Zagg website is quick and easy, there are no serial numbers you need to have or anything, you only need to tell them what device you got it for and which model screen protector you got.
Another benefit of the zagg shields is the lifetime of the screen protector, in my experience the screen protectors lasted almost 2 years for my Droid Incredible before I replaced it, the screen protector started to come off around the edges of my phone. While the screen protectors do age, I would much prefer the aged screen protector opposed to any damage to my screen. In my entire life of my Droid Incredible, bought in April 2010 and still used as an e-reader by my girlfriend today, there is not one scratch on the screen thanks to the Zagg shield.
While I have not personally tried the Verizon 3 pack of screen protectors, I have had friends use them and they were disappointed with the quality of them, the biggest issue was having the screen protector stay on.
Zagg screen protectors have done such a great job in my opinion I have not wanted or even thought of trying another brand.
As for tips to putting the Zagg brand on, make sure you wash your hands before you do anything, clean the screen so their is no oil, fingerprints, dust or anything else on the phone, make sure the spray gets on both the screen protector and the screen but do not soak either, just enough spray to cover the phone and protector. I found it best when applying the screen protector to start at the top of the screen in one of the corners and work your way to the opposite top corner then work your way down, make sure to use the applying tool they put in the packaging, be sure to use a good amount of force when use the tool but be careful not to apply too much pressure and crack the screen.
If you do not want to try putting the screen protector on yourself, you can go to the Cell Phone employees at Best Buy and have them put the screen protector on. You do not need to purchase the protector from Best Buy, but they charge you a fee to do it. The major benefit of this is that if they screw up and ruin your protector they will replace it.

I tried the Verizon 3-pack when initially purchasing the one. While they are decent, I knew I wanted something a little more rugged.
I did some research and ended up settling on the Mime USA Feather lite tempered glass screen protector. It's super thin and flexes nicely when unboxed, so it's highly unlikely to actually shatter like other tempered glass protectors. It's extremely scratch resistent. I tested car keys, nails, and knives on the screen protector after applying it to the phone and absolutely no marks showed up. It fits perfectly to the parameters of the screen and is hardly noticable after application. I would highly recommend this product. I ordered it from the Mime USA website for about $28, they even threw in a code for free shipping!
Sent from my HTC6500LVW using xda app-developers app

I usually don't use screen protectors and whenever I put on a case, I take it off an hour later. I've had the phone for like 9 months now and the screen is fine. There are tiny little scratches but you can't notice them unless you try really hard to, they don't affect the clarity of the screen in any way. I just don't like using screen protectors because they attract finger prints and smudges so easily even when I try a more expensinve screen protector. Honestly the screen will be fine for a long time. Yes there will be extremely tiny scratches but you won't care because they're almost non-existant. But one thing to keep in mind though, is that sand is crazy harsh on the screens, so I'm extra careful when I go to the beach with my phone. That's when I suggest putting on a case and a screen protector. Because even if a tiny bit of sand getes in your pocket, it might cause a little damage. Right now my phone is brand new since I got it replaced because of a camera issue, and I just can't get myself to stick with putting on a case or screen protector, I had a screen protector on it but I took it off 2 weeks later because I miss the naked screen.

Spitfire91726 said:
I did some research and ended up settling on the Mime USA Feather lite tempered glass screen protector. It's super thin and flexes nicely when unboxed, so it's highly unlikely to actually shatter like other tempered glass protectors. It's extremely scratch resistent.
Click to expand...
Click to collapse
Reviews go with what you said. I think when I buy my next screen protector when my zagg wears down, I'm going to try one of these.

i'm using an invisible shield screen protector. Went on pretty easy, there were no bubbles, and it's pretty thick. I've only had it on for a week, so I can't say much about durability, but it's pretty good as far as a screen protector goes. I'm still very partial to those matte finish screen protectors, so i'll probably be picking up one of those in the future.

BygSii said:
Reviews go with what you said. I think when I buy my next screen protector when my zagg wears down, I'm going to try one of these.
Click to expand...
Click to collapse
Got a MIME Feather myself about a month ago or so now, and I must say that it's the best choice I've ever made as far as screen protection. I'd had a Spigen and some other tempered glass brand, but they were both just too thick and noticeable on the screen. The Feather is perfect because it's hard to even tell it's on there, plus it has the Oleophobic coating to prevent smudges and fingerprints. Seriously, don't even waste your money on another screen protector. You can't beat the MIME Feather.

tyler.durden said:
Got a MIME Feather myself about a month ago or so now, and I must say that it's the best choice I've ever made as far as screen protection. I'd had a Spigen and some other tempered glass brand, but they were both just too thick and noticeable on the screen. The Feather is perfect because it's hard to even tell it's on there, plus it has the Oleophobic coating to prevent smudges and fingerprints. Seriously, don't even waste your money on another screen protector. You can't beat the MIME Feather.
Click to expand...
Click to collapse
+1 what he said, minus the experience with Spigen. The MIME Feather is the first glass screen protector I've tried, and I don't think I'll ever use anything else. It's superb and well worth the premium price. With that on the screen and a Ballistic Shell Gel case on the rest of the phone, I don't worry about it too much.

I got a EBay $6.99, Chinese made, 0.4mm thick tempered glass screen protector a few weeks ago.
Went on really well, no bubbles and sticking down along all edges and corners. Has the beveled edges on the glass so no sharp edges.
Far better than ANY plastic one i have used on any phone. Touchscreen works well with it on.
Actually hard to notice now its on unless you run your finger from the speaker onto the screen , so the REALLY thin ones must be pretty close to invisible.
I polish up the screen every 2-3 days. Does get prints on it, so maybe the expensive ones have a better oleophobic coating??
For the price, most excellent.

astmacca said:
I got a EBay $6.99, Chinese made, 0.4mm thick tempered glass screen protector a few weeks ago.
Went on really well, no bubbles and sticking down along all edges and corners. Has the beveled edges on the glass so no sharp edges.
Far better than ANY plastic one i have used on any phone. Touchscreen works well with it on.
Actually hard to notice now its on unless you run your finger from the speaker onto the screen , so the REALLY thin ones must be pretty close to invisible.
I polish up the screen every 2-3 days. Does get prints on it, so maybe the expensive ones have a better oleophobic coating??
For the price, most excellent.
Click to expand...
Click to collapse
so it's basically putting another layer of glass on top of your screen? Like putting a slide cover on a microscope slide? I wonder if that'll make screen touching a little imprecise (or any more than having a screen protector.

xzyragon said:
so it's basically putting another layer of glass on top of your screen? Like putting a slide cover on a microscope slide? I wonder if that'll make screen touching a little imprecise (or any more than having a screen protector.
Click to expand...
Click to collapse
Its definitely putting another layer of glass on the screen. You have to be careful and get it in the right position 1st time as they dont move around once stuck down. Removing them without breaking is, i suspect, very difficult. The "tape hinge" method of application works pretty well.
I have found the touch sensitivity on mine to be great. Certainly there is no difference to the "usability" of the phone, and the smoothness an feel is as good as the original screen.
I did read one review where the buttons on screen wouldn't work with a glass screen protector, but that has certainly NOT been my experience. From what i have read the thickness of these has come down from around 0.6mm in early incarnations to something like 0.15mm and being flexible in some brands.
I got a 0.4mm one. No scratches as yet. Its supposed to be very hard (9H??). I had no issues with fitting my case on after installing the screen protector.. Its a cheap silicone and hardback model that provides good corner protection. Hopefully the screen protector will help if it falls on its face sometime.

What about Just Like Glass?
Has anyone tried it?

Didnt know protectors like the Mime feather existed. Will have to try it out.

Xeternall said:
Didnt know protectors like the Mime feather existed. Will have to try it out.
Click to expand...
Click to collapse
Just bought my first one a month ago (MIME Ghost), best screen protector I have ever used. It's definitely scratch resistant and feels like the original screen. Not sure how it will hold up to drops, but that's not something I am willing to test.

Had a friend buy some Write Guard screen protectors for his HTC One. I installed one on his HTC One. Screen protector was all ready getting all kinds of scratches in it. No Bueno.

I used the XtremeGuard screen protector for a very long time on my HTC One, but recently I decided I wanted a matte finish screen protector, so I switched to Tech Armor Anti-Glare. Feels much nicer to me and gets a lot less fingerprints and smudges.

I was using the protector that came with the UG case. After reading this thread, I picked up a MIME. Very impressed. It goes on dry, was easy to remove and reposition and left absolutly no bubles (these drive me CRAZY). It has somewhat finger print resistant and I did not heave to deal with wetting the protector, then waiting 24 hours to see if all the bubles went away. Best screen protector I have purchased and believe me, I have tried at least 20 different types over the years.
I have had no issues with the touch sensitivity. You can't even notice it's on unless you look really closely at the top edge.

Using the screen protector that came with my otterbox comuter and it is quite terrible.
The screen protector has been on since April and it is already deteriorating. The spots where I'd swype, type show heavy signs of use. With a faint finger swipe over the screen you can actually feel the difference.
Other than that, the actual performance isn't the worst. Glare and all in the sun is bad, indoors though I don't have any issues.
Will look into MIME.
Cheers,