Develop Bugs

New Asian Firmware ZUJP2

Another Asian firmware that runs nice. The build date 2010-09-08. Its branded with Taiwan Telecom Apps, just like ZUJP1.This firmware is that is read and write, this is the first september firmware i found that are. Try if you like
Download link:http://www.multiupload.com/FBLCZHQNYY
Its with root files (kernels, update.zip,PIT, Odin, firmware)

Nice to see some new FW, thanks

is it a froyo build??

racerboy3801 said:
is it a froyo build??
Click to expand...
Click to collapse
No.. seems its Eclair..

September firmware?! - that's good.

JPK has a 19th sept build date...

new_bember said:
No.. seems its Eclair..
Click to expand...
Click to collapse
No, its Froyo

new_bember said:
No.. seems its Eclair..
Click to expand...
Click to collapse
No. I saw the Froyo like rooting method inside (flashing back the original kernel etc.). This is a Froyo build.

Has anyone (else) tested it?
Honestly i am disapointed in voodoovkernel jm 8 plus lagfix plus OCLF 2 on top. Quadrant is skyrocketing, inside apps it eorks well, but everything else in beteeen takes much longer to load, lot of black screens inbeteeen apps. I am willing to try something new, or maybe i ll just get back to stock.
Sent from my GT-I9000 using Tapatalk

I suspect this is a branded or at least customised build off the release Froyo branch, which I suspect is the JPH / JP4 branch.
JPK is newer because it is a leak from the Froyo trunk.
My feeling is that what we're seeing now, and what will form the "official" releases, are optimised JPH /JP4 builds. They may be better / faster than JPK but as they're based on an earlier branch, their build dates won't be as new as JPK.

Rawat said:
JPK has a 19th sept build date...
Click to expand...
Click to collapse
ZUJP2 is 06 September build date which is older than JPK.

stuclark said:
I suspect this is a branded or at least customised build off the release Froyo branch, which I suspect is the JPH / JP4 branch.
JPK is newer because it is a leak from the Froyo trunk.
My feeling is that what we're seeing now, and what will form the "official" releases, are optimised JPH /JP4 builds. They may be better / faster than JPK but as they're based on an earlier branch, their build dates won't be as new as JPK.
Click to expand...
Click to collapse
If they're not recompiling anything (keeping the build date same) then what exactly are they optimizing? They can't even recompile the kernel without build dates changing.
I think all they do is test and custom apps/branding. For now everything is speculation and guesswork.
I think I will wait for official Froyo or flash it out of boredom.

man firmware release had really dried up lately

Why would they waste anymore time on Eclair builds if Froyo is a soon to be release.
We should be glad they have switched tactics to concentrate on Froyo which could mean a definate release by months end.
Question is, will it be released in all countries at the same time or specific countries first.

So, has anyone tried it?

just flashed..
first impressions good..
1. booted up in chinese language
2.contacts showing all alphabets in the side search
3. quite fast like dxjp1
4. comes pre installed with some bloatwareapps like hamiapps, hami... hami.. dont know what these are..
5. seems to me as being very close to an official build.

aswinm16 said:
just flashed..
first impressions good..
1. booted up in chinese language
2.contacts showing all alphabets in the side search
3. quite fast like dxjp1
4. comes pre installed with some bloatwareapps like hamiapps, hami... hami.. dont know what these are..
5. seems to me as being very close to an official build.
Click to expand...
Click to collapse
How is browser performance? Loading times, panning around etc.

its ok..not perfect..i went back to dxjp1..too much bloatware slowing up the phone..

anyone know if this uses hsupa?

This ROM seems to be de-odexed.
It starts in Chinese. You have to manually switch it to English.
Includes the Chinese keyboard.
If you don't want those carrier custom apps, just don't flash the CSC file. I didn't need to repartition (mine is the 803 pit) and it worked just flashing the PDA and MODEM sections.
TIP: When you are rooting, you don't have to "pull the battery out" after the first kernel flash. You can just press and hold the power button for around 20 seconds and the phone will shut down.

[Q] "Camera Failed" after F/w update

Hello people,
I just updated my Wave 525(S5253) with KIES 2.0 to firmware S5253DDKC1/S5253ODDKA1.
But after updating I am unable to use my camera. It gives "Camera failed" error.
Any help? Is this firmware buggy? If so why did Samsung release it, that too on KIES??
Anyone else tried updating to this firmware?
Thanks

Even I had got same problem in my wave s8500, I had ddjh1 and i tried flashing malaysian bada 1.2 which was not a full FW and my camera was messed up. after flashing xxjid i still had the same problem, so i went to phone's internal menu(*#197328460#>video>camera firmware>Phone/CAM ver check... it was SESBDF21:SESBDF21....... this is mostly similar to wave 525
Then after Flashing it was SESBDG01:SESBDF21 then i selected phone to CAM write
and CAM was updated to SESBDG01... then my camera came back to normal...( i found this in Badadev forum)
First reboot ur phone once then Try selecting option Phone to CAM write in case there is differance of CAM FW.. DO AT YOUR OWN RISK!
If you have flashed FW unofficially try this, if through kies before doing above steps use ur warranty ......GO TO SERVICE CENTER!

Thanks jake for the quick reply. I tried the above steps, the menu layout was a little different, but yeah i found the right options...but it did not work..
As I had updated it via KIES.....so I am gonna use my warranty....

dj2tusk said:
Thanks jake for the quick reply. I tried the above steps, the menu layout was a little different, but yeah i found the right options...but it did not work..
As I had updated it via KIES.....so I am gonna use my warranty....
Click to expand...
Click to collapse
IS bug of the KC1 firmware... Flash KC2 with multiloader..(KC1 isn't official updato so Kies doesn't update the phone)
sorry for my bad english,
xmannox

xmannox said:
IS bug of the KC1 firmware... Flash KC2 with multiloader..(KC1 isn't official updato so Kies doesn't update the phone)
sorry for my bad english,
xmannox
Click to expand...
Click to collapse
Your english is ok.......but i updated to KC3, again with KIES, but still no camera...
Also there are lot of string errors in the main menu...like Orkut is replaced with "Mes Contenus" and Voice recorder with "360 My Web"...

[Q] Note 8 firmware upgrade issues

Hi. Dont jump on me for those questions but couldnt find anything here on xda nor google helped me.
So here it is.
Just bought my Note 8. GT-N5110. It has Android 4.1.2 and build version JZO54K.N5110XXBMD1. Not rooted
As I know 4.2.2 is available I wanted to update. But OTA says I am up to date.
I tried then Kies. I have all the drivers uptodate and Kies version uptodate as well. When I connect my Note it is recognized but it seems that Kies doesnt read everything what it should.
It doesnt show the firmware version at all.
When I am trying to check for firmware updates all I get is mssg:
GT-N5110 does not support initialising.
I also tried sammobile. But cuz I couldnt determine which version of Note 8 I have and didnt know which firmware to pick up and installed their apk.
It should check for me everything but I am getting only
Model GT-N5110
Product code. - nothing
PDA N5110XXBMD1
CSC N5110CCBMD1
Modem - nothing
After hitting GET LATEST receiving only mssg - No info foun for the provided firmware.
So my questions are:
- How can I determine is the firmware update available for my Note or not yet?
- How can I determine which version of Note do I have? I bought it on amazon.co.uk so I think it is European version but are there country specific version as well for WIFI only model?
- Which firmware should I download from sammobile to stay "legal" lets say. UK? Dont want to root at the moment.
Any help really appreciated.
cheers
mkiggy

mkiggy said:
Hi. Dont jump on me for those questions but couldnt find anything here on xda nor google helped me.
So here it is.
Just bought my Note 8. GT-N5110. It has Android 4.1.2 and build version JZO54K.N5110XXBMD1. Not rooted
Any help really appreciated.
cheers
mkiggy
Click to expand...
Click to collapse
Hi.
I have the same version. (Settings, System, About (or something like that at the bottom) and then in the buildnumber there is the version.
Mine is rooted so i can't do OTA and it doesn't find an update.
I guess since there isn't any 4.2.2 version on sammobile, there doesnt exist any yet for our build.
Greetings
Chris

Thanks for that.
Decided to root so wont worry anymore about OTA or KIES updates.
Cheers

Firmware
mkiggy said:
Thanks for that.
Decided to root so wont worry anymore about OTA or KIES updates.
Cheers
Click to expand...
Click to collapse
From this link you can get to know about the latest available firmware for your device Model & Product Code. See image 1.
And this link will give you info about all the firmware released for the same. See image 2.
Is the tablet you bought is a used one? Because if it is brand new, then the PDA should be N5110XXBMC9, which is the first release. Also missing Product code can mean something very wrong.

AkiOrpheus said:
Is the tablet you bought is a used one? Because if it is brand new, then the PDA should be N5110XXBMC9, which is the first release. Also missing Product code can mean something very wrong.
Click to expand...
Click to collapse
it was brand new bought from amazon.
what you mean "very wrong" ?

[Q] About upgrading 4.1.2 Note

Hi all
i am a beginner here and i am trying to catch up
to the point
i bought a new note 8.0 lte version from Sweden , it came with 4.1.2 out of the box
after setting it up i searched for updates but they tablet keep telling me no updates i know there is 4.2.2 and even 4.4.2
my tablet info after dialing *#1234# is
PDA: N5120XXBME1
CSC: N5120OXXBME2
MODEM: N5120XXBMD9 and i found this version is for nordic countries with code Nee
after searching sammobile i found this version
PDA: N5120XXDNE4
CSC: N5120OXXDNE1
MODEM: N5120XXDNE4
also with product code NEE
so my questions
1- is it ok to flash this room on mine ?
2- i read that i can even flash any - note 8 .0 LTE kitkat room - if i keep my moden info from the original room
is that true ??
3-i read also due to bootloader version if i updated to 4.4 i cannt revert back to my 4.1 is that true?
even if i had the original room of 4.1.2 * i downloaded it from sammobile
thanks

Mahmoud_abdou said:
Hi all
i am a beginner here and i am trying to catch up
to the point
i bought a new note 8.0 lte version from Sweden , it came with 4.1.2 out of the box
after setting it up i searched for updates but they tablet keep telling me no updates i know there is 4.2.2 and even 4.4.2
my tablet info after dialing *#1234# is
PDA: N5120XXBME1
CSC: N5120OXXBME2
MODEM: N5120XXBMD9 and i found this version is for nordic countries with code Nee
after searching sammobile i found this version
PDA: N5120XXDNE4
CSC: N5120OXXDNE1
MODEM: N5120XXDNE4
also with product code NEE
so my questions
1- is it ok to flash this room on mine ?
2- i read that i can even flash any - note 8 .0 LTE kitkat room - if i keep my moden info from the original room
is that true ??
3-i read also due to bootloader version if i updated to 4.4 i cannt revert back to my 4.1 is that true?
even if i had the original room of 4.1.2 * i downloaded it from sammobile
thanks
Click to expand...
Click to collapse
Does it tell you that the tablet has been changed or that there are no updates? If it is the first one, its probably because its rooted. If it is the later one i dont really know what could cause it, might be a branded tablet or something. Never been without Root so i have never done OTA updates on the Note8
1. It should be completely OK to flash that ROM
2. I have flashed several ROMs and kept the modem files and it works fine, tho with the ROM you are about to use you can flash it all without any problem as it is made for nordic countries
3. I have read the same, I have not tried to go back from 4.4 so i can not say if it is possible or not. But i am sure there are loads of threads about reverting and the KitKat bootloader.
4. Welcome to a really sweet tablet, tho there are not many custom ROMS developed for it, but those that are, are working really well

Thanks my savor for the answer
about my no update thing , if i checked for updates i got
"The latest updates have already been installed "
it was a crazy offer from Elgiganten nearly 50% off price i got it for 1990 sek although due to web error on elgiganten site i managed to buy it Electroword
so this not branded ?
and about bootloader thing , as i read we cannt replace it back , we can flashi4.1 or 4.2 with odin but still the bootloader will be 4.4 and many have issues with this combo
i read that 4.4 cause some problem for some users like spen 2mm off etc so i like to have to the option to completely downgrade or at least i will update to 4.2
what do you think
by the way did the Nordic version got 4.2 update ? i cannt find it on sammobile
and again thank you very much

Mahmoud_abdou said:
Thanks my savor for the answer
about my no update thing , if i checked for updates i got
"The latest updates have already been installed "
it was a crazy offer from Elgiganten nearly 50% off price i got it for 1990 sek although due to web error on elgiganten site i managed to buy it Electroword
so this not branded ?
and about bootloader thing , as i read we cannt replace it back , we can flashi4.1 or 4.2 with odin but still the bootloader will be 4.4 and many have issues with this combo
i read that 4.4 cause some problem for some users like spen 2mm off etc so i like to have to the option to completely downgrade or at least i will update to 4.2
what do you think
by the way did the Nordic version got 4.2 update ? i cannt find it on sammobile
and again thank you very much
Click to expand...
Click to collapse
I dont think we got 4.2 at all, i used Civatos ROM during 4.2 and now i use rooted stock and i have no problems at all actually. S Note might be a little bit more sluggish to write in than before but nothing major anyways.
I have also read about the 2mm off center Spen, i had that in 4.1, and then it was more or less than 2mm depending on where on the screen i pointed.
I it were up to me, i would upgrade, but if you want to be able to revert back to 4.1 that would be a problem. Maybe try a custom ROM first? But that would mean breaking warranty and if something happens you will have all the hassle of returning it to stock with no trace of custom ROMs I have done this three times so i know how frustrating it is,
The problem i had then with my Note8 was that the Spen would not register on a 2-3cm wide strio on the upper part of the screen. I think this was because i used a magnetic case (non OEM). and the two times following it was the service station that messed things up so that i had to revoke the purchase and get a new Note8 So i would suggest that if you want to protect your Note you should get a good backcover and then buy a tempered glass screenprotector from ebay. I work at a wire rod mill and i have the note with me everywhere and it doesnt have a scratch on it (plus it fits in the breastpocket of my flameproof jacket). I do not work directly in the production line but i am at the factory floor more than half my workday
A little sidetrack from the ROM-talk but i thought i should give my 2 cents on the Note, now i have to sleep... even tho we get a "free hour" I dont want to be a wreck in the morning

Thanks again and again
and i think i will try a custom first as you suggested , i read that i can have 4.4 room based on 4.1 bootloader
so i can check 4.4
and thanks about the case and protector advice , my main use for the tablet is in home so fro now i got a samsung book cover for it it is not the powerful protection but i liked that it is thin .
i was afraid of magnetic cases -non oem - as they have strong magnet so i bought the oem
have a nice dreams and for me it is custom room searching time

Mahmoud_abdou said:
Hi all
i am a beginner here and i am trying to catch up
to the point
i bought a new note 8.0 lte version from Sweden , it came with 4.1.2 out of the box
after setting it up i searched for updates but they tablet keep telling me no updates i know there is 4.2.2 and even 4.4.2
my tablet info after dialing *#1234# is
PDA: N5120XXBME1
CSC: N5120OXXBME2
MODEM: N5120XXBMD9 and i found this version is for nordic countries with code Nee
after searching sammobile i found this version
PDA: N5120XXDNE4
CSC: N5120OXXDNE1
MODEM: N5120XXDNE4
also with product code NEE
so my questions
1- is it ok to flash this room on mine ?
2- i read that i can even flash any - note 8 .0 LTE kitkat room - if i keep my moden info from the original room
is that true ??
3-i read also due to bootloader version if i updated to 4.4 i cannt revert back to my 4.1 is that true?
even if i had the original room of 4.1.2 * i downloaded it from sammobile
thanks
Click to expand...
Click to collapse
If you want official 4.4.2 install Samsung KIES (download), and plugin a cable between PC and tablet, then install the update through Samsung Kies,

Can anyone help I want to flash SM-G988B older official rom to go back to UI 2.1

As title suggests I'm not happy at all with UI 2.5 which has destroyed my battery and SoT and lost some other features I really liked for my SM-G988B S20 Ultra Exynos model .
Can anyone help with the latest official f/w for UI 2.1 built number code to download it and flash it from Sammobile?
Thanks in advance for any help

orbitech said:
As title suggests I'm not happy at all with UI 2.5 which has destroyed my battery and SoT and lost some other features I really liked for my SM-G988B S20 Ultra Exynos model .
Can anyone help with the latest official f/w for UI 2.1 built number code to download it and flash it from Sammobile?
Thanks in advance for any help
Click to expand...
Click to collapse
Only if u search for original rom on sammobile and flash through odin. Good luck

I searched the archive I think the latest with UI 2.1 was the G988BXXS4ATGB/G988BOXM4ATGB with security patch 2020-08-01.. Can anyone confirm?

orbitech said:
I searched the archive I think the latest with UI 2.1 was the G988BXXS4ATGB/G988BOXM4ATGB with security patch 2020-08-01.. Can anyone confirm?
Click to expand...
Click to collapse
You can't downgrade bootloader (bl). It's a mission impossible.
So I think that it won't work.

Please let me know if you are able to downgrade to one ui 2.1

blixer said:
You can't downgrade bootloader (bl). It's a mission impossible.
So I think that it won't work.
Click to expand...
Click to collapse
That firmware is bootloader v4 and I don't think there is any v5 yet is there? So it should work fine

blixer said:
You can't downgrade bootloader (bl). It's a mission impossible.
So I think that it won't work.
Click to expand...
Click to collapse
Sohag0910 said:
Please let me know if you are able to downgrade to one ui 2.1
Click to expand...
Click to collapse
*Detection* said:
That firmware is bootloader v4 and I don't think there is any v5 yet is there? So it should work fine
Click to expand...
Click to collapse
It is v4 and it worked just fine without triggering the knox.. Did a smart switch & samsung account backup before I downgrade at the version I mentioned (latest before UI 2.5 that is) and everything works just fine. I already feel the difference in battery life.. /sigh
Will probably stay here until UI 3.0 if I don't see any other important feature added. Only some camera features I'll miss but battery is the most important thing and I'm not willing to sacrifice an hour or two of SoT for UI 2.5
Thanks all for your help

orbitech said:
It is v4 and it worked just fine without triggering the knox.. Did a smart switch & samsung account backup before I downgrade at the version I mentioned (latest before UI 2.5 that is) and everything works just fine. I already feel the difference in battery life.. /sigh
Will probably stay here until UI 3.0 if I don't see any other important feature added. Only some camera features I'll miss but battery is the most important thing and I'm not willing to sacrifice an hour or two of SoT for UI 2.5
Thanks all for your help
Click to expand...
Click to collapse
How on earth you downgraded from UI 2.5 to UI 2.1. Did you flash without unlocking boot loader or without. i have been trying for so many times in Odin and have been stuck on vbmeta.img in the log. many said its impossible
right now i am at
Version One UI 2.5
2020-08-20 update
10
PDA G980FXXU4BTH5
CSC G980FOXM4BTH5
I need to revert back to
Version UI 2.1
2020-07-22 update
10
PDA G980FXXU3ATG4
CSC G980FOXM3ATG4
i am on indian s20 exynos. which firmware exactly you used to revert back,please help me out, which build i must use. i go into download mode in phone connect to pc, start odin load all the files and start but it gets stuck at vbmeta.img. on turning on the phone nothing is changed

CtrlU said:
How on earth you downgraded from UI 2.5 to UI 2.1. Did you flash without unlocking boot loader or without. i have been trying for so many times in Odin and have been stuck on vbmeta.img in the log. many said its impossible
right now i am at
Version One UI 2.5
2020-08-20 update
10
PDA G980FXXU4BTH5
CSC G980FOXM4BTH5
I need to revert back to
Version UI 2.1
2020-07-22 update
10
PDA G980FXXU3ATG4
CSC G980FOXM3ATG4
i am on indian s20 exynos. which firmware exactly you used to revert back,please help me out, which build i must use. i go into download mode in phone connect to pc, start odin load all the files and start but it gets stuck at vbmeta.img. on turning on the phone nothing is changed
Click to expand...
Click to collapse
I used G988BXXS4ATGB/G988BOXM4ATGB (EUR for GR) with security patch 2020-08-01 as I previously mentioned and it didn't stuck at anything.. Passed w/o triggering the knox of course and works like a charm.
Already feel the difference in battery life as I mentioned. Used the standard flash procedure I changed nothing