I lost my miniusb cable and charger
and artemis does not charge with starndard 5-pin miniUSB cable from qtek 9100
are they really different or what?
please help me..
xmarkom said:
I lost my miniusb cable and charger
and artemis does not charge with starndard 5-pin miniUSB cable from qtek 9100
are they really different or what?
please help me..
Click to expand...
Click to collapse
The Artemis will charge with a standard mini usb cable. I use the same cable for both my Artemis and my Wizard.
And my other half charges her XDA Graphite (which is not even an HTC device) with my charger and vice-versa.
Any 5 volt charger with a mini USB plug will do. And they should be 5V if they have a mini USB plug on!
mine do not charge with standard cable which charges wizard
and what is ExtUSB (i ve found somewhere that is cable for 9600 and artemis)
even there is converter extusb to miniusb ???
Working great for me
I tried with different USB cables with my Orbit phone. It is workling fine for me. Only the thing needed is to install Active Sync software on PC so that it will update the USB drivers on PC.
I even tried charging my Orbit with motorolla V3i phone electric charger and it charges but very slowly.
Is it possible using this kind of converter to connect simultaneously a mouse and a keyboard together to the phone ? (for example using a wireless set mouse/keyboard or a usb splitter).
Can the phone provide the power to work on both devices ?
Maybe if it was possible to charge the phone somehow using the same cable ?
http://forum.xda-developers.com/showthread.php?t=1098778
I want to connect the phone to a tv using hdmi cable (adaptor) and control the phone from distance using a wireless keyboard/mouse.
thanks
I would be interested in this too. I saw EVO 4G used as a desktop computer - http://forum.xda-developers.com/showthread.php?t=1038840 but he used bluetooth mouse and keyboard and the only thing connected to its micro usb port was hdmi cable. I would rather use some kind of usb hub in order to connect these 3 devices to the micro usb port in the phone and even charge it all at once. If anyone knows if it is possible please share your knowledge
BT
Yes, you are right about Bluetooth. I believe it's the best solution (but more expensive) because when connecting the hdmi adaptor no other ports remain for other usb devices. Also hmdi adaptor charges the phone (for example BizLink MHL to HDMI TV-Out Adapter)
thanks
You might be able to run both USB mouse & keyboard; try using a keyboard that has a USB port or two on it, then plug the mouse into the keyboard's USB. Power may be a problem; the SGS2's USB connector isn't going to provide anywhere near the 500 mA in the USB 2.0 spec.
Of course, if you're using the USB, you can't use the MHL/HDMI, and vice versa -- the connector modes are mutually exclusive. If you have to have HDMI output, you should be able to use a BT keyboard and/or mouse.
I recently purchased the USB OTG cable
http://www.ebay.in/itm/271089450380...X:IT&_trksid=p3984.m1439.l2649#ht_3211wt_1141
I got it for around 2 usd, it works great, I can connect my usb pen drive, wired mouse and my microsoft Arch mouse.
Title says it all, has anyone tried this?
From what I've read (and the other threads on this topic) - no it can't be done.
It can't be done my friend
I got it to work
psycho1200 said:
It can't be done my friend
Click to expand...
Click to collapse
I used the following and plugged into my TV usb port and had ethernet (verfied with WIFI shut off) and it was charging.
USB 2.0 Ethernet adapter - <amazon.com/gp/product/B003VSTDFG>
OTG with power - <amazon.com/gp/product/B00C452XFO/>
Yup, this now works great for me too! :good:
I bought the Ethernet adapter Nvidia Recommends (same as browncoatdave's)
http://www.amazon.com/Plugable-Gigabit-Ethernet-Chromebook-Specific/dp/B003VSTDFG
And just whatever Y cable could find that didn't look uber cheap.
http://smile.amazon.com/gp/product/B00CXAC1ZW/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
What I have plugged into the shield
jjprichards said:
Title says it all, has anyone tried this?
Click to expand...
Click to collapse
1) 3 Port USB Hub
2) Plugable USB 2.0 to 10/100/1000 Gigabit Ethernet LAN Wired Network Adapter
3) Micro USB Host OTG Cable with Micro USB Power
4) Smart Touch Mini USB TouchPad Keyboard
5) Full Size trackball mouse
6) Charging cord
I am charging the battery with ethernet, keyboard and mouse plugged in.
No Problem. But this is also after the kitkat update which added the charging while ethernet is plugged in.
solidsn said:
1) 3 Port USB Hub
2) Plugable USB 2.0 to 10/100/1000 Gigabit Ethernet LAN Wired Network Adapter
3) Micro USB Host OTG Cable with Micro USB Power
4) Smart Touch Mini USB TouchPad Keyboard
5) Full Size trackball mouse
6) Charging cord
I am charging the battery with ethernet, keyboard and mouse plugged in.
No Problem. But this is also after the kitkat update which added the charging while ethernet is plugged in.
Click to expand...
Click to collapse
trackball mouse, why? gives me flashbacks of the 90s...
solidsn said:
1) 3 Port USB Hub
2) Plugable USB 2.0 to 10/100/1000 Gigabit Ethernet LAN Wired Network Adapter
3) Micro USB Host OTG Cable with Micro USB Power
4) Smart Touch Mini USB TouchPad Keyboard
5) Full Size trackball mouse
6) Charging cord
I am charging the battery with ethernet, keyboard and mouse plugged in.
No Problem. But this is also after the kitkat update which added the charging while ethernet is plugged in.
Click to expand...
Click to collapse
Did you plug all the devices in a particular order? I noticed that if I plug in my charger AFTER I plug in the OTG cable into the shield, then it is not charging. But when I plug in the charger into the OTG cable and then plug it into shield, it is charging.
Is your hub powered? What exact model is it? I am asking because I have very similar setup to yours but the shield does not detect USB devices connected to the hub - it's this one: http: // esperanza . pl/esperanza-usb-2-0-hub-4-porty-ea116,182,437.html
I can connect one usb device directly to OTG cable and it works, but when I connect a hub, it no longer works.
There is a cheap way to do this if you have the soldering skills, and are willing to try it.
Get a cheap USB "Travel" hub.
Open it up, and replace the Upstream USB cable with an OTG cable (A scrap Micro-USB cable may or may not work. The connector must be Properly wired for OTG).
Remove the main power diode in the USB hub, and solder jumper the 2 pads where it was. A Multimeter in continuity mode can help you find the right component, but it takes some experience. There usually is not much in a cheap travel hub, so I can usually find them just by looking, but like I say, only try this if you have the experience, and you know what you are looking for.
Power the hub through it's 5V power jack (if it has one), or you can add a power only micro-USB socket. (Only connect the (+) and (-) power pins, do not connect the data lines. Connect it to any one of the Full size USB port's power pins. Observe polarity.)
Voila! You now have 4 Full size USB ports, it will charge your device, and provide power (Up to the rated power of the AC adapter) for your USB devices.
I did this years ago in the Nokia 770 days. It was one of the first consumer devices that supported USB OTG. Article still exists here:
http://www.linuxslate.org/N770DockingStation.html (Scroll down to the "Electronic Components" Section)
Would this work?
Would this: SODIAL(R) Micro USB Host OTG Cable with Micro USB Power plus this: Anker® Unibody 3-Port USB 3.0 and Ethernet Hub
Give me the ability to charge tablet, use Ethernet and additionally connect USB mouse and keyboard, and possibly charge Nvidia Game Controller?
Or would it just be a waste of time and money
So I recently bought a magnetic cable adopter, It has two parts an android micro usb head and the body where it can connect to the usb head with the use of magnet and the other side is a micro usb port the body also has a led indicator.
Given that my phone is usb otg capable, when I connect my usb to the micro usb port at the body of adopter my phone can't read it.
Is this a hardware problem where the magnetic adopter is not capable of reading other devices eg. Usb, mouse, keyboard etc. and only supports charging?
Or can I still use the usb otg features by using a 'usb otg cable Y'?
Or is there other way?
Sadly I can't try usb otg Y since I haven't bought any and want to make sure it will work before I buy.
Feel free to ask more information if it's not sufficient enough. Thanks!
OTG + Magnetic cable
Same problem but at least I know that OTG can (should?) work through a magnetic cable as I have another device on which it does.