Develop Bugs

[HOWTO] Froyo xxJPK (Odin), Root, Lagfix, Recovery 2e!

IMPORTANT NOTES, MUST READ FIRST
IF 3-BUTTON-COMBO DOES NOT WORK ON YOUR PHONE, FIX IT BEFORE FLASHING! FIX IS THERE: http://forum.xda-developers.com/showthread.php?t=785201
IF PHONE STUCKS AT ANIMATED "S", DO A FACTORY RESET/DATA WIPE FROM RECOVERY!
IF YOU HAVE FORCE CLOSES, DO A FACTORY RESET/DATA WIPE FROM RECOVERY!
DO NOT RESTORE APPDATA WITH TITANIUM BACKUP IF YOU UPGRADE FROM 2.1 TO JPK
MAKE A BACKUP OF YOUR /efs FOLDER!
- In some cases it's possible that this Firmware will change the Product Code of your Phone. So it's good to have a Backup. ;-)
------------------------------------------------------------------
HOWTO UPGRADE TO JPK USING ODIN:
Download:
Multiupload: http://www.multiupload.com/F6RZMQEW2H
Rapidshare: http://rapidshare.com/files/420862878/GT-I9000_XXJPK.rar
Depositfiles: http://depositfiles.com/de/files/txbu94s1s
Included:
Odin3 v1.3
Pit 512
- Download
- Extract
- Make sure Kies is not running
- Open Odin
- Enable Re-Partition Checkbox
- Choose "s1_odin_20100512.pit" as PIT (Download PIT-Files: http://www.multiupload.com/5YOPDTN7CZ)
- Choose "I9000XXJPK-REV03-PDA-low-CL584433.tar.md5" as PDA
- Choose "MODEM_I9000XXJPK.tar.md5" as PHONE
- Choose "GT-I9000-CSC-MULTI-OXAJPK.tar.md5" as CSC
- Start Phone in Download-Mode
- Connect Phone via USB
- Flash
- Goto Recovery and do Factory Reset / Data Wipe
- Reboot
Note:
It's recommended to use PIT 512 for Flashing. Flashing with PIT 803 will cause Problems.
If Odin hangs at
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
Pull the Battery, restart Phone in Download-Mode, restart Odin and try again.
------------------------------------------------------------------
HOWTO ROOT JPK FIRMWARE:
Note: Chainfire has created new CF-Root. http://forum.xda-developers.com/showthread.php?t=788108
Stock zImage: http://www.multiupload.com/ULQEGKORBE
Included:
Root
Superuser 2.3.6.1
Busybox 1.17.1
Recovery 2e
/system read-only
- Extract
- Look @ readme file
------------------------------------------------------------------
HOWTO UPGRADE TO BUSYBOX 1.17.1
Note: It's not needed to install Busybox 1.17.1 if you've used Roor-Package from this Post. It's always included.
- Make sure you´ve rootet the Phone
- Open Terminal Emulator
- Type: su [ENTER]
- Type: busybox mount -o remount,rw /system [ENTER]
- Close Terminal Emulator
- Download Busybox from Market
- Start the App
- Do not install
- Close the App
- Open Terminal Emulator again
- Type: su [ENTER]
- Type: cp /sdcard/busybox /system/xbin/busybox [ENTER]
- done
------------------------------------------------------------------
STOCK LOCKSCREEN FOR UNTOUCHED JPK
needs Recovery 2e
What does this Script do?
It changes Samsung Lockscreen to Stock Android 2.2 Lockscreen.
- Backup /system/framework/android.policy.odex to /system/framework/android.policy.odex.bak
- Copy new android.policy.odex to /system/framework/
Download:
Multiupload: http://www.multiupload.com/HMBNFQADEY
- Copy update.zip to internal SD
- Reboot into Recovery
- apply update.zip
- done
Howto go back to Samsung Lockscreen?
Stock Lockscreen Remover
Download: http://www.multiupload.com/0KP69HOTIK
------------------------------------------------------------------
HOWTO REFRESH BATTERY STATS:
http://forum.xda-developers.com/showthread.php?t=722862
------------------------------------------------------------------
HOWTO APPLY LAGFIX TO JPK:
Not really needed.
One Click Lagfix App: http://forum.xda-developers.com/showthread.php?t=784691
Note:
If Installation fails the reason could be because you flashed with PIT 803. Please Reflash JPK using PIT 512.
http://forum.xda-developers.com/showpost.php?p=8291642&postcount=162
------------------------------------------------------------------
USEFULL MODS:
Android Stock Lockscreen: http://forum.xda-developers.com/showthread.php?t=784992
Stop Media Scanning on Boot: http://forum.xda-developers.com/showthread.php?t=753294
Flightspit's Battery Icon Mod: http://forum.xda-developers.com/showthread.php?t=765419
Change System Fonts: http://forum.xda-developers.com/showthread.php?t=735148
------------------------------------------------------------------
HOWTO GET INTO RECOVERY:
- Turn off your Phone
- Hold VOLUME UP + HOME Buttons
- While holding VOLUME UP + HOME Buttons press POWER Button
- If Display goes active, release all Buttons otherwise Phone will do a Reboot-Loop
------------------------------------------------------------------
HOWTO GET INTO DOWNLOAD-MODE:
- Turn off your Phone
- Hold VOLUME DOWN + HOME Buttons
- While holding VOLUME DOWN + HOME Buttons press POWER Button until you reach Download-Mode
- Release all Buttons
------------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
------------------------------------------------------------------
Additional Infos:
Discussion: http://forum.xda-developers.com/showthread.php?t=790637
Changelog: http://forum.xda-developers.com/showthread.php?t=791236

Supportet Languages:
Bulgarian
Cestina
Dansk
Deutsch
English
Espanol
Francais
Hrvatski
Italiano
Latvian
Lithuanian
Magyar
Nederlands
Polski
Portugal
Romana
Slovencia
Slovenian
Suomi
Svenska
Türkce
Greek
Pyccknn
Cpnckn
Ykpaihcbka
Korean
Samsung Keyboard Languages:
US/UK English
Deutsch
Nederlands
Polski
Francais
Italiano
Portugal
Espanol
Türkce
Korean
Swype Languages:
US/UK English
Deutsch
Francais
Espanol
Italiano
Nederlands
Portugal
Polski
Turkce
Korean

Waiting for your information

Please symlink all busybox commands, it takes no space and makes all apps which need advanced shell commands work without problems..

can i flash via odin with SIM and memory card inserted or should i remove them before flash?

plichtousek said:
can i flash via odin with SIM and memory card inserted or should i remove them before flash?
Click to expand...
Click to collapse
You should remove them. I did it once (to JPH) with the sim by accident and it didn't affect it. But I wouldn't risk it!

khsbenny said:
You should remove them. I did it once (to JPH) with the sim by accident and it didn't affect it. But I wouldn't risk it!
Click to expand...
Click to collapse
why is it so? i just would like to know, because you don't have to remove them when you flashing with kies
i hate removing the back cover ... :-(

flash with odin
hi, i am on jph version (flashed it through kies) applied root and lagfix v2.
how do i proceed flashing jpk from jph?
do i unroot, unlagfix or or?
thanks,

Kernel broken... Wont install

Simply Flash. Doesn't matter if your phone is rootet, lagfixed or not.

What about Samsung keypad input languages? Not Swipe.

Aery said:
Download: http://www.multiupload.com/WWXX609T5V
NOT TESTET YET!
- Root
- Superuser 2.3.6.1
- Busybox
- Recovery 2e
- extract and copy update.zip to internal sd-card of your phone
- run odin with auto reboot UN-checked, loading the i9000_Kernel.tar as PDA
- put the phone into download mode and flash the i9000_Kernel.tar
- pull the battery. reboot into recovery mode and flash the update.zip you put in the root folder of your sdcard.
- pull the battery again, reboot into download mode again.
- run odin with auto reboot checked, loading the I9000XXJPK_KERNEL.tar as PDA
-
Click to expand...
Click to collapse
performed it, a the last step no progress, just hanging there!. "Kernel" word only.
had to re flash again!.

Aery said:
Simply Flash. Doesn't matter if your phone is rootet, lagfixed or not.
Click to expand...
Click to collapse
Your I9000XXJPK_KERNEL is broken, but GT-I9000PTRJP4_KERNEL can be used

7zip ****ed the archive. Had to do it under Linux.
Repacked und reuploaded.
Root works now!

There are reports that pit 803 gives some errors with the CSC, this ROM should use PIT 512

Aery said:
7zip ****ed the archive. Had to do it under Linux.
Repacked und reuploaded.
Root works now!
Click to expand...
Click to collapse
done, thanks.

Hi,
Ok, I was quite happy with JPH, but I guess I'll flash again before I spend more time configuring the JPH...
Only thing I miss is the tun.ko for the 2.6.32.9 [email protected] #1 kernel of the JPK. Same problem as I have currently with the JPH. I can build it myself but I miss the kernel source and .config. Until I get openvpn up and running I can't be fully functional with android. Changing the kernel temporarily to run update.zip worked fine and it's probably the safest way to get root. Thanks for providing the I9000XXJPK_KERNEL.tar so quick.

ahhh i missed you..shining S boot logo

<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Enter CS for MD5..
<ID:0/003> Check MD5.. Do not unplug the cable..
<ID:0/003> Please wait..
<ID:0/003> Checking MD5 finished Sucessfully..
<ID:0/003> MD5 hash value is invalid.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
What happened ? ??

bumblechord said:
What happened ? ??
Click to expand...
Click to collapse
Redownload it please.

roeddie v0.9.6 Vodafone Smart II Alcatel v860

Vodafone Smart II aka Alcatel v860
with Latest Update2 INTEGRATED
based on stock vodafone it​
1. How to make flash.
First unpack "alcatel-onetouch.7z" to ROOT of your MicroSD Card.
"must be in root eXactly like this "f:\alcatel-onetouch\backup\" (where f:\ is your letter of the MicroSD Card)
so for that just unzip, unrar the files "alcatel-onetouch.7z" to your MicroSD Card letter mine is f:\
2. Insert in your Vodafone Smart II aka Alcatel v860 smarthphone and be sure that you have the phones battery charged at 100% before continue.
3. make backup of your stock rom first just in case something is wrong
start up phone with VOLUME UP + POWER as soon as is vibrate just let go of POWER key and don't let go of VOLUME UP till TCT ALCATEL Recovery v1.0.0.0 appears
to navigate use VOLUME UP + VOLUME DOWN
to enter in subdirectory or to enter use HOME (HOUSE)
to go back from subdirectory use GO BACK ARROW
4. To make BACKUP of existing ROM go to
- backup and restore - backup
5. To RESTORE do
- wipe userdata/factory reset (confirm with YES -- delete all user data)
- wipe cache partition (confirm with YES -- Wipe Cache)
- advanced - Wipe Dalvik Cache (confirm with YES -- Wipe Dalvik Cache)
- backup and restore - Restore (select "apps")
Wait to complete restore operation and
- reboot system now
roeddie custom rom edition v0.9.6
Changelog: 10-September-2012​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
===============================================
Italiano
Espanol Francais
Deutsch​English (United States)
English (United Kingdom)
​===============================================​
With Applications version
Requires: microSD memory card inserted in the phone with a TOTAL of 1GB free space
0. Integrated the Latest OTA Update2 from Vodafone
(NO locked boot and no Missing Recovery, all are Here Functional)
1. Has Backup and Restore, Install Zip from sdcard
(all here nothing is lost You still have Recovery Menu in Power + VolumeUp)
2. Install now apps directly to sdcard
(thanks to Vodafone OTA Update2 for that)
3. Totally UNBRANDED from Vodafone Crap
4. ROOT access with Superuser
5. Link2SD for advanced USERS
6. 70 MB free space of internal memory
7. has best tweaked settings for CAMERA
(Video, Photo & Sound Quality, as much as this phone Hardware can offer)
Ex: vodafone: eddie:
video: encoding: 15 fps 25 fps (no more pauses, fluid recordings)
codec: m4v AVC H264 (Activated,better quality, on vodafone was Erased)
bitrate: 360000 1500000 (up to 1.5 mb/s of 640x480)
audio: codec: amrnb AAC (better quality)
bitrate: 12200128000 (128kbs)
samplerate: 8000 16000 (16KHz)
fotos: quality: 90% 100%
8. Added Volume Sound Boost by 20%
(now you can hear better and louder in the limit of the speaker)
9. IMPROVED speed up and performance with new settings
(Ex: speeded up wi-fi up/downs, speeded system rendering with gpu assisted acceleration,
faster scrolling, added rendering quality, decrese dialing delay...... )​
10. Total Commander with ROOT support (the best file manager ever)
11. BATTERY BOOSTER to balance and maximixe battery without loss in performance
12. Launcher replaced with tweaked more powerfull and less memory eater LaucherPro 13. Fixed WiFi, Bluetooth and 3G, no more errors when turning off, on
14. Fixed ALL APPLICATIONS INSTALLED IN THIS RELEASE !
(meaning that GooglePlay, Google+, Google Talk, Search, YouTube
and the rest of them are Indeed Working)
(tested All Applications till the green blood of Android, no more errors)
15. Customization and many, many, many others tweaks and hacks.....
(it's a looooong list)
16. Build in with Apps and Games.
Quick Info Update:
added: customizations (theme, icons......)
init.d tweaks (for advanced startup scripts and settings)
*now everyone can mod with personal scripts system/etc/init.d/*
*init.d will be used also after the boot will be unlocked*
updates: (updated Google Play Store to v3.8.16, Maps 6.11.1, Google+ 3.1.1.32879387
Facebook 1.9.9, Google Translate 2.5, Skype 2.9.0.315, Twitter 3.3.1
Yahoo! Messenger 1.8.1, Yahoo! Mail 1.4.5, QR Code 5.2.2 and others......)
added: Tapatalk 2.2.8 and others ......
PART 1: MD5: 98388102682ebd5849cbdab4e7b16808
www.mediafire.com/?j49zt6mvz6mbw9q
PART 2: MD5: 95e015d050536230524321e120f61564
www.mediafire.com/?3s3vsxhs5v8v85n
Custom Themes Packs
by roeddie​
How To Install:
0. Copy the zip file to ROOT of miscroSD card
"ex: f:\blue.pack.zip"​​1. Install from Recovery
with Install zip from SDcard.
2. Reboot and Enjoy......
only for this pack of languages
not tested on other languages
compatible with v0.9.6 and v0.9.1
by roeddie​===============================================
Italiano
EspanolFrancais
Deutsch​English (United States)
English (United Kingdom)
===============================================​
Default Themes Based From
v0.9.6
return to Default theme
Size: 4.77 mb
MD5: 14fc4fe6b527f8d7d7f82a4185e69807
Download: www.mediafire.com/?mdx6inop8kiyins
Ladies Edition v0.1​
​​​
​
Size: 10.80 mb
MD5: 548fd17d0f38271f46bb3d64257b18ff
Download: www.mediafire.com/?8b54cwfb2a8b1pb​
​
Green v0.1
Size: 9.1 mb
MD5: 358114cfea69b32eb7d47d99443b7cef
Download: www.mediafire.com/?qt5od0teb9taf61​
High Tech v0.1
Size: 8.2 mb
MD5: 541cd895b4fa85c5f721a7ead50abcf2
Download: www.mediafire.com/?88zx5i29ez8r9nn
​
======================================================================
These compilations are made by EDi and as usual it says
NO, NO, NO, NO ,NO ,NO,
NO Viruses, NO Mallware, NO Trojans, NO Rootkits, NO Spyware
or any other **** invented by sick mind(s) are NOT here.
This compilation is intended to HELP and Support The Real User, Novice, Advanced and PRO.......
And not to be harm by unknown.
tWEAKS + Speed + Settings + Compatibility + Stability + Compiled (by EDDIE)
====================================================================== ​
​​

Soft Buttons dont work now
I there i flashed roeddie with apps on my Irish Vodafone Smart 2 - everything working touchscreen etc and volume sswitch - however my soft buttons at bottom of screen Home/menu/back/search do nothing now when pressed. Can you tell me what img file controls these buttons is it : Boot.img or Bootloader.img or cache.img or custpack.img or data.img or modem.img or recovery.img or system.img thanks - obviously there must be something different between the Italian smart 2 and the Irish smart 2 phones / ROM

andy_from_ireland said:
I there i flashed roeddie with apps on my Irish Vodafone Smart 2 - everything working touchscreen etc and volume sswitch - however my soft buttons at bottom of screen Home/menu/back/search do nothing now when pressed. Can you tell me what img file controls these buttons is it : Boot.img or Bootloader.img or cache.img or custpack.img or data.img or modem.img or recovery.img or system.img thanks - obviously there must be something different between the Italian smart 2 and the Irish smart 2 phones / ROM
Click to expand...
Click to collapse
hi, I have a same problem. Flash back stock Italian rom not solve the problem. I think the original 01015 rom could solve it, but i can't find. Maybe the original recovery (with four options) will be enough too, but i can't flash it back. Send OK write OK, but nothing changes.

Here is the solution:
Flash this rom, with this commands and after reboot wait a few secunds then say: wolo-looo and evrything will work well:
fastboot-windows.exe flash bootloader bootloader.img
fastboot-windows.exe flash boot boot.img
fastboot-windows.exe flash system system.img
fastboot-windows.exe flash recovery recovery.img
fastboot-windows.exe flash custpack custpack.img
fastboot-windows.exe flash userdata data.img
fastboot-windows.exe reboot
UK http://www.mediafire.com/?9xqfq9ww7031xgx

i have that downloaded and on the sd card, i boot into the screen for the "TCT ALCATEL Recovery v1.0.0.0" and i can use the volcume buttons to change up and down the screen, but as i have flashed with a different rom the soft buttons down the bottom dont work so i cant flash this rom... any help on this is greatly appriciated

My low line keyboard is not working after upgrade...
Hello,
What I can do now to fix it? Pls help me...
Luc

add language
add czech language pls : D + CyanogenMod would be best : D

thnx, i will try after my warranty has expired. Also (am a noob whith adnroid roots) can my phone after rooting work whith others sim card exept vodafone?!

No Elis wont work whith other sim's (Duhet zbllokuar te kto qyqanet) :beer:
Sent from my U8160

????
port cyanogenmod of samsung galaxy ace s5530i? It has the same chipset + pixel resolution : Zmatený: : Smích:

Hi there, my old u8110 got pwned, and touch is dead now, so I got now this nice smartphone, Alcatel v860 (Vodafone Smart II)
I was going to flash this ROM, but not sure since I see some negative feedback about soft buttons.
Can anyone tell me something more about this ROM please? Is just to know if it is a nice idea to test it or not.
Some guy some posts above gave a solution, does it work?
And if I get the time I could start working on CyanogenMod since there are not active projects of it for this smartphone
EDIT: I've flashed the recovery, and it's going great at the moment, even the home button is working now.
Now I'm flashing the ROM, let's see how it goes, hope good, thanks for this Eddie, hope to see you soon back at XDA

Everything works, everything DD

MantisEngine said:
Everything works, everything DD
Click to expand...
Click to collapse
Cool! So you didn't get any problem with soft keys?
Did you already have the recovery?
I've got the stock rom with the stock alcatel recovery (I didn't update the firmware), so I don't need to get into fastboot to install, I just have to wipe and to restore roeddie's rom.. Is it right?
Ty

BenLz said:
Cool! So you didn't get any problem with soft keys?
Did you already have the recovery?
I've got the stock rom with the stock alcatel recovery (I didn't update the firmware), so I don't need to get into fastboot to install, I just have to wipe and to restore roeddie's rom.. Is it right?
Ty
Click to expand...
Click to collapse
Yeah, I've flashed first the recovery.
But the easiest way is to use fastboot and the tool given by roeddie here
Just enter into fastboot mode and use ROM v0.9.6 + Recovery/Backup/Restore to flash ROM/Recovery.
It's pretty easy, if u need any more help, just ask me

Well, I flashed the ROM through recovery yesterday.
Everything works, except for GPS fix... It just... doesn't fix the location! I tried the apps fasterfix, gpsfix, gps status, but these didn't solve the problem! With the stock rom I had a pretty fast fix.
Does your GPS work well? If yes, could you let me see your gps.conf content? Here's mine:
Code:
NTP_SERVER=it.pool.ntp.org
XTRA_SERVER_1=h t t p://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2=h t t p://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=h t t p://xtra3.gpsonextra.net/xtra.bin
SUPL_HOST=supl.google.com
SUPL_PORT=7276
I had to insert these spaces between h t t p because I still can't post outside links in this forum
Have you got some idea?
Thank you very much
PS: I live in Italy

BenLz said:
Well, I flashed the ROM through recovery yesterday.
Everything works, except for GPS fix... It just... doesn't fix the location! I tried the apps fasterfix, gpsfix, gps status, but these didn't solve the problem! With the stock rom I had a pretty fast fix.
Does your GPS work well? If yes, could you let me see your gps.conf content? Here's mine:
Code:
NTP_SERVER=it.pool.ntp.org
XTRA_SERVER_1=h t t p://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2=h t t p://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=h t t p://xtra3.gpsonextra.net/xtra.bin
SUPL_HOST=supl.google.com
SUPL_PORT=7276
I had to insert these spaces between h t t p because I still can't post outside links in this forum
Have you got some idea?
Thank you very much
PS: I live in Italy
Click to expand...
Click to collapse
With the GPS Fix do u mean the precision of the GPS on Maps? Because I get the same at stock and custom. It's accurate within 60 meters.

I mean the time that the gps takes to find my position, not the accuracy. It doesn't find it.... It just keep on searching forever, so I can't use any navigation app. That's why I asked you to post the content of your gps.conf, I think there's something wrong with mine.

Same Problems with gps-fix and activating bluetooth (roeddie_0.9.6)
[email protected] i use the same rom-image (0.96). when data-service and wlan is on, i m not able to activate bluetooth-service. the cell-phone tryś to do it, but it failed. only if i restart the phone, bt would be activated.
is there any fix for it?
best regards
kowalskie

kowalskie said:
[email protected] i use the same rom-image (0.96). when data-service and wlan is on, i m not able to activate bluetooth-service. the cell-phone tryś to do it, but it failed. only if i restart the phone, bt would be activated.
is there any fix for it?
best regards
kowalskie
Click to expand...
Click to collapse
Try using bluetooth whether WiFi or service data, both may cause a conflict with the bluetooth.
It may be a bug that u can solve by wiping with recovery.
If not, tell me what are u using BT for and I may give u a solution.
---------- Post added at 03:49 PM ---------- Previous post was at 03:48 PM ----------
BenLz said:
I mean the time that the gps takes to find my position, not the accuracy. It doesn't find it.... It just keep on searching forever, so I can't use any navigation app. That's why I asked you to post the content of your gps.conf, I think there's something wrong with mine.
Click to expand...
Click to collapse
Hmmm, for me it is working, try wiping all data and dalvik-cache thru recovery.
Anyway I will post to you my GPS config.
NTP_SERVER=europe.pool.ntp.org
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
SUPL_HOST=supl.vodafone.com
SUPL_PORT=7275

MantisEngine said:
Try using bluetooth whether WiFi or service data, both may cause a conflict with the bluetooth.
It may be a bug that u can solve by wiping with recovery.
If not, tell me what are u using BT for and I may give u a solution.
---------- Post added at 03:49 PM ---------- Previous post was at 03:48 PM ----------
Hmmm, for me it is working, try wiping all data and dalvik-cache thru recovery.
Anyway I will post to you my GPS config.
NTP_SERVER=europe.pool.ntp.org
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
SUPL_HOST=supl.vodafone.com
SUPL_PORT=7275
Click to expand...
Click to collapse
[email protected] I use bluetooth to connect to my motorola headset, my bt-freespeaker in my tomtom-navi und to send and receive data with my laptop or another cellphone. I think, i need a fix to correct the bt-mistake.
Cheers
kowalskie

[ROM][KERNEL][TWEAK]JellyPro for Galaxy Y Pro (GT-B5510)[2.3.6]

JellyPro1.3 for Galaxy Y Pro B5510​
FEATURES :
Based on :
ROM stock Samsung XXLH3 (CSC OXALH4, Modem XXLH2) (Gingerbread)
ASAsoft kernel (https://github.com/asasoft/Kernel-B5510)
Functionality :
Init.d support
Support azerty or qwerty keyboard
Dark Jelly Bean themed (only phone.apk is not fully themedl)
New "recent app" shortcut
SMS stock apk replaced by Cyanomodgen's
Included : GO SMS PRO, Emoji plugin & Iphone theme, and ES file explorer
Rooted
CPU spy & No-frill CPU control integrated in setting apk
Extend battery life
Extended Power menu
New boot animation & deleted shutdown one
Sony xloud™
Status bar improved, slide to get away (available since the OTA 1.3)
RFS filesystem (samsung default)
Core tweaks :
Bacem_tweak : undervolt your battery up to 20 mV (you can change this in init.d/01bacem_tweak)
droidwall_modules
darky_zipalign : zipalign at every boot
KURO 1 and KURO 2 tweaks : many useful tweaks
Adrenaline engine : other optimizations
DOWNLOADS :
ROM stock (unzip) : http://www.mediafire.com/?lrqtxhk4bl9ytyn
Utilities (unzip) : http://www.mediafire.com/?51061xjq21c71xk
ROM JellyPro (do NOT unzip) : http://www.mediafire.com/?9rb34a481eg9gbq
ASASoft kernel : https://github.com/asasoft/Kernel-B5510
/!\ Please do not mirror and PM me before publishing on an other thread or forum /!\
After downloading and unzipping, you should have seven files :
Stock ROM :
Modem.tar
PDA.tar
CSC.tar
Cutom kernel :
Samsung-B5510-Kernel.tar
Utilities :
unlock.zip to unlock your phone if you want
CWM.zip to flash the ROM
And the custom ROM :
JellyProV1.3.zip
SETUP :
Preliminary : have ODIN (last version recommended), put unlock.zip , CWM.zip and JellyProV1.3.zip on your memory card, not in any folder
Step 1 : Connect your phone in download mode (power + home + vol down) and flash stock ROM with odin.
Get back another time to download mode, and flash the custom kernel.
Step 2 : Reboot your phone recovery mode (power + home + vol up) and select "wipe data (factory reset)", and confirm
Warning : this wil ERASE ALL your data
(you can just make a "wipe cache", but I don't advise that)
Then select "Apply update from sdcard", and select CWM.zip
You enter in the ClockWorkRecoveryMod
Select => "mount and storage", => "format /system", confirm
IMPORTANT : do NOT forget, then, to select "mount /system" and "mount /data", unless ROM won't install correctly (after that, they both say "unmount/system" and "unmount/data")
The hit return button and chose in the menu : "install zip from sdcard", then "choose zip from sdcard". Select JellyProV1.3.zip.
Be patient...
Reboot.
Recommendations :
Don't try to update, it's useless because the apk has been removed
Credits :
ImbaWind for adrenaline script
agmtpd for the task switcher
lokeshsaini94 for various mods
lidroid for the statut bar
And you, tester, to give me ideas and reports
If a moderator could move this thread, I'll be thankful... I cannot post in dev cause I'm still a n00b on this forum... and sorry if my english isn't very well, cause I'm french
TIP :
If your sim card doesn't work (and if you want to set your keyboard as qwerty and not azerty), try changing the CSC : type *#06# to get your IMEI number, and then type *#272*<your IMEI># ; select your own CSC code (for me XEF for example) but this will ERASE ALL YOUR DATA !!!
Observation :
This ROM is very close to the JellyBlast one I made a few month ago. That's intentional : I re-coded myself all the functionalities I wanted from the stock ROM. There is no code from creed anymore (you can check ), only mine and these from the credits.
If you spot a bug, or/and you know hows to solve it (especially theming ones), PM me

UPDATES :​
All Over The Air (OTA) updates must be flashed in CWM, after doing a "clean cache" (if not, a bootloop can occur) ; obviously, do not format /system... All previous updates must be flashed before applying the latest update (for example, you have to be in OTA1.3 in order to flash 2.1).
OTA 1.3 :
Excuse me for the names, but the OTA 1.3 is not included in JellyPro1.3. It only means I made 3 major changes in the original ROM, and 3 major changes in the first OTA.
Changelog :
Swipe to get away notification added
Buggy beats equalizer deleted
Superuser shortcut added in settings
Luminosity slider added in statut bar
Solved which made crash the statut bar in the setting app
Wake up on optical pad press
Emotes added
Download : https://www.mediafire.com/?8csndwxcga1n9yf
OTA 2.1 :
Changelog (sorry, not too much I'm afraid) :
Bug solved on SMS stock app
Bug solved on statut bar
ES File explorer updated
Only a few graphic issues solved
Loading annimation changed
Wake up on optical press debug for those who don't use french language
Download : http://www.mediafire.com/?i9mjmhmcvpvsuv7
OTA 3.1 :
Changelog :
ES File Explorer Updated
Go SMS Pro deleted, available in an app pack
Download : http://www.mediafire.com/?7a500yzaveao0g3

Themes, Add-Ons & Apps :
All those zips must be flashed in CWM after a wipe of the cache and a davlik-cache. Moreover, theses themes are only for the latest version of JellyPro : 3.1 (even if the name ends by 2.1, it only show the minimal update you have to get before flashing the theme).
Themes :
Center clock : http://www.mediafire.com/?xjddf11tbqs31f2
Clock back to right : http://www.mediafire.com/?3910lc09h98hook
Other battery icon with percentage : http://www.mediafire.com/?4vhkrbhagvu166m
Back to the original battery icon : http://www.mediafire.com/?6isqoq62ft2889d
Add-Ons :
App Pack : http://www.mediafire.com/?shbokqps98lb847
Install Pdroid, android assistant, cleaner master et LBE security (V5, the latest compatible with B5510) in system/app.
Uninstall : http://www.mediafire.com/?gzizhmeocrdxd7d
GO SMS Pack : http://www.mediafire.com/?zf591vur843f5hl
Install Go SMS Pro, emoji plugin, french language pack and iphone theme in a old version compatible with JellyPro.
Uninstall : http://www.mediafire.com/?ugeoiiztz7ok43r
Apps :
Here you can find old/moded app for the Galaxy Y Pro. If you've got one not listed, feel free to tell me !
Skype : https://app.box.com/s/bzuhyrzj3txb2aqyoo0g
Rescan media root : https://play.google.com/store/apps/...diascannerroot&rdid=com.addz.mediascannerroot
Deactivate the scan of media file on startup : you can win up to 30 seconds in boot.
/!\ Must be reactivate when updating !!!
AnTuTu Benchmark : http://www.mediafire.com/?l5rm8c55ubzhy3n

Screenshots :
Bootanimation & PIN lock sceen :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Launcher & Icons :
Music & Contacts :
Setting app :
Calls :
Extended Power Menu :
Easter egg :

NycoFR said:
reserved for screenshots
Click to expand...
Click to collapse
Could you post some pictures?

Yes I'm working on it

NycoFR said:
Functionality :
Support azerty or qwerty keyboard
Click to expand...
Click to collapse
Any idea how to change from azerty to qwerty? I changed the language to italian or english but that doesnt change the hardware keyboard layout

You have to select the CSC which goes with your country, defaul is XEF (fr, azerty keyboard), and you have to change it to those for your country with qwerty keyboard (look at the bottom of the first post, in TIPS )

latest google apps?
your rom works perfectly except the fact that I cannot use/update to the lastest google apps... any tip?

What do you mean by "Google apps" ? Have you got any error message ? I can use gmail, calendar, maps, etc without issues on mine. Have. You installed all the updates (1.3 and 2.1) ? But if you're talking about YouTube, I blocked the updates (by signing the app differently) because the latest update is veeerrrryyyyy slow, and the background player (small icon of the video) is pretty ridiculous on this small screen^^

Dialer Theming
@NycoFR Please change the Blue circle to full Green Circle!

Updated YouTube App for JellyPro
Latest Updated YouTube App for JellyPro

Pie Controls for JellyPro!
Pie Controls for GT-B5510
Orignal Thread:http://forum.xda-developers.com/showthread.php?t=1330150
Credits:noname81

What the heck are you doing ? I've already included some boost tweak, and I tried adrenaline which cause some battery leaks, the latest YouTube is just awful for a small screen, and I don't want to overload my rom with so much apps ! But thanks for th masterkey app, I was looking for it, I'll include it in my next OTA. For the circle, I'm trying but I'm out of time, sorry, I will be more available next year

Thread cleaned of off topic material.

Thanks a lot ! And I don't think that pie control is compatible with a landscape screen^^

NycoFR said:
What do you mean by "Google apps" ? Have you got any error message ? I can use gmail, calendar, maps, etc without issues on mine. Have. You installed all the updates (1.3 and 2.1) ? But if you're talking about YouTube, I blocked the updates (by signing the app differently) because the latest update is veeerrrryyyyy slow, and the background player (small icon of the video) is pretty ridiculous on this small screen^^
Click to expand...
Click to collapse
Well I am talking about Google Play Services. I don't seem to be able to install it (it either says it's incompatible or the it complains about the signature). hence I can't use google+ or hangouts.. any idea how to fix it?

zekusso said:
Well I am talking about Google Play Services. I don't seem to be able to install it (it either says it's incompatible or the it complains about the signature). hence I can't use google+ or hangouts.. any idea how to fix it?
Click to expand...
Click to collapse
Hello, I'm too looking on a howto install Play Services. My wife use it on stock rom with no problems specifically to use the Google+ Photos autoupload feature for photo backups.
With this rom it can't be installed and Google Photos does not work.
Everything else works like wonders

Launch es file explorer in root mode and delete /system/app/GoogleServiceFramework.apk (make a backup first !), then delete /data/dalvik-cache folder, and reboot (it will take a few minute to initialise all), or try replacing the play store apk...

Can you upload a version without all the signed apks?? Thanks

[Custom ROM] LeTv x500 by BB72 Multi Language Based on [Stock ROM] X507 Indian

[Custom ROM] LeTv x500 by BB72 Multi Language 008S 5.5.0 Based on [Stock ROM] X507 Indian
This rom is based on the EUI 5.5 version x507 (Le1s model for the Indian market)
Features:
- Multilingual Framework
- Root-date with the latest version SuperSu track
- Option added in the settings Reboot
- Concealed button sleep and Power off the top right corner of the status bar
- Added notification and alarm sounds
- New Client Email
- Changed size photos contact incoming call / output
- Bootloader Unlocked (the Indian version has locked bootloader)
- Broadband 900 3G available
- Other
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Prerequisites:
I) Battery charge at least 80%
II) Driver adb properly installed on your PC
DOWNLOAD:https://mega.nz/#!M8oADZaQ!d-hq3uFKS3j-BW4cd1e2imKZ9BBhoZVaucRWcn97L8U
(right-click on the .exe file and run as administrator)
1.)First, since we have to flash a new rom we need a modified recovery
so we're going to download the TWRP recovery that will allow us later to flash the rom itself.
DOWNLOAD:https://mega.nz/#!gksDQITR!LJjsC3wpgMc3zlZfkxldVDLfgRQy_RLTBynE4N1mTLE
2.)Go to Settings>About phone and hit the build number 7 times to unlock developer options menu.
Enable USB DEBUG and connect the smartphone to the PC via USB cable.
3.) Click on the pc Install_LETV_x500_recovery_BB72_GS_2860.exe command
and follow the instructions in the command prompt.
4.) the smartphone will reboot into recovery TWRP powered By BB72
Installation:
- Installing from TWRP recovery
- Take a Nandroid backup of the ROM currently in use
- From TWRP recovery (wipe advanced -> cache / data / Dalvik / system)
- Install zip (select the zip of the ROM)
- Restart (watch the first boot is long)
- Access to Playstore and make app updates (when first starting the Playstore will be updated. We recommend an additional restart)
During install to recovery you will see a warning on the mounting of the system: normal
NOTE: If you have problems with notifications:
1. Lock the app with a swipe down from taskmanager so it looks a padlock
2. From Settings / Licence Policy / Management start make sure you have given the boot to boot to the app you want to receive notifications
3. From Settings / Battery / Intelligent energy saving DISABLE make sure the app you want to receive notifications
NOTE: If after doing all the steps to receive notifications WAPP, telegram, ETCC (eg block the app, set to start automatically at boot time, etc ...) you still have problems notifications, then try with a wipe "Internal storage "from TWRP. Such wipe erases all personal files (video, photos, music, documents etc ..) therefore you do a complete backup on PC
Download link:
https://mega.nz/#!ZZRnySBS!ScLwI-73s5DeqNP1xEm2rln6CNofRLechBYGNuMNop4
Another download link:
https://cloud.mail.ru/public/72qe/G4VnS3vxh
Original link (Translated into English):
https://translate.google.com/transl...basata-su-eui-507-versione-indiana-stock.html
Original link:
http://www.androidiani.com/forum/mo...basata-su-eui-507-versione-indiana-stock.html

Reserved

[Custom ROM] LeTv x500 by BB72 Multi Language 12S Based on [Indian Stock ROM X507]
This rom for x500 is based on the EUI 5.5 version x507 (model S Le1 marketed in India)
CHANGELOG:
- Aligned to the 12S version
- Fixed the ability to add new System Fonts (thanks @ Cuoco92 )
- Multi Language
- Rooted
- Launcher modded (Google search and swipe upwards to access the dialer)
- Tap the right side of the status bar to sleep, Tap long to shutdown / reboot
- UMTS Broadband 900 present
- Opera Browser functioning
- More....
NOTES:
- When you change the system Fonts, wait for it to return the message to restart your phone and only then proceed to restart
- The change of the font size from the app you use to change the font, does not work and therefore should not be used
- Access to remote controller generates the start of the locale which often remains in the background even when you exit the remote control, so I highly recommend you keep getting turned off the location (GPS) and activate it only when you need (this is a good idea to do always)
- When you set a password or PIN to unlock the account you are asked to login LeTV, just that outputs with the back button
INSTALLATION:
- Coming from ROM CHINA is required to wipe data / cache / Dalvik (if you want to also system: in this case you get a warning during installation but it is completely normal)
- Coming from INDIA ROM you can try to do an installation with only wipe cache / Dalvik but if you are having force close must proceed to perform installation with all wipes
DOWNLOAD:
https://mega.nz/#!5IB10JCD!V968MBc_KOAOaMpz0XlJziX6aRJao8l-_s2UIYhQ5VM
Size: 1.30Gb
INFO:
https://translate.googleusercontent.com/translate_c?depth=1&hl=en&rurl=translate.google.rs&sl=it&tl=en&u=http://www.androidiani.com/forum/modding-letv-x500/502059-rom-letv-x500-bb72-basata-su-eui-507-versione-indiana-stock.html&usg=ALkJrhh6brRTkCbM3AcZApVlXHSem35UiQ#post7395007
http://www.androidiani.com/forum/modding-letv-x500/502059-rom-letv-x500-bb72-basata-su-eui-507-versione-indiana-stock.html#post7395007
---------------------------------------------------------------------------------------------------------------------------------------------
DOLBY ATMOS:
thanks @worstenbrood from xda
03-dap_r6.5.zip
https://mega.nz/#%21sAZQhRIZ%219l0aEiw9dP7xWi0uHA0rGDKDEpn8zvKrmF6tYU5JKA0
Installing from recovery without wipes
--------------------------------------------------------------------------------------------------------------------------------------------
LAUNCHER MOD Drawer 4x4 (4 icons in dock):
https://mega.nz/#!MEIXAQ4Y!ht2767dIv1HChI1fCQQhDpN1lvaUQa3XgHnvm75TbyY
Installing from recovery without wipes
--------------------------------------------------------------------------------------------------------------------------------------------
Yahoo Weather Problem
Yahoo Weather comes preinstalled with
[Custom ROM] LeTv x500 by BB72 Multi Language 12S Based on [Indian Stock ROM X507]
(Yahoo Weather is default app into Indian Stock ROM X507)
If Yahoo Weather not working normally on your phone
and you have a problem with this app!
1.) With Root explorer or ES File Explorer(Tools-Root Explorer enabled)
go to
system/vendor/operator/app
and delete
yahoo_weather (folder)
2.) Reboot your phone
uninstall/delete
Yahoo Weather
3.) Install Yahoo Weather from Play Store
P.S.
Whether for lack of time (it is impossible to continue with two versions of rom)
but also because it makes no sense to continue with the Chinese version of the rom,
I will bring forward the development of the only Indian rom (at least that for the 12S and then we'll see)
https://translate.googleusercontent.com/translate_c?depth=2&hl=en&rurl=translate.google.com&sl=it&tl=en&u=http://www.androidiani.com/forum/modding-letv-x500/492828-modding-letv-x500-twrp-firmware-powered-bb72-208.html&usg=ALkJrhh52xXKKPnbrbMjrTI8B6asPBBe8A#post7437032

DOLBY ATMOS:
thanks @worstenbrood from xda
03-dap_r6.5.zip
https://mega.nz/#%21sAZQhRIZ%219l0aEiw9dP7xWi0uHA0rGDKDEpn8zvKrmF6tYU5JKA0
Installing from recovery without wipes
Update

Thanks for the great rom
Absolutely like this rom.
Keep up the greatwork:good:

LAUNCHER MOD Drawer 4x4 (4 icons in dock):
https://mega.nz/#!MEIXAQ4Y!ht2767dIv1HChI1fCQQhDpN1lvaUQa3XgHnvm75TbyY
Installing from recovery without wipes

My installation procedure :
1.) Frst in TWRP make backup of the existing system.
2.) Download and copy (S1_x500_ML_byBB72_GS_BASED_X507_5.5.012S_r2) to phone
3.) Switch off phone and go to TWRP
4.) Coming from ROM CHINA is required to wipe data / cache / Dalvik /system
(in this case you get a warning during installation but it is completely normal)
during installation procedure as like little paused then goes normally
Do not delete internal memory!!!
5.) Start install procedure
P.S.
After installing a new ROM
It is unusual and does not happen to everyone.
(If you notice that something is not working as it should.)
Reboot your phone.

Yahoo Weather Problem
Yahoo Weather comes preinstalled with
[Custom ROM] LeTv x500 by BB72 Multi Language 12S Based on [Indian Stock ROM X507]
(Yahoo Weather is default app into Indian Stock ROM X507)
If Yahoo Weather not working normally on your phone
and you have a problem with this app!
1.) With Root explorer or ES File Explorer(Tools-Root Explorer enabled)
go to
system/vendor/operator/app
and delete
yahoo_weather (folder)
2.) Reboot your phone
uninstall/delete
Yahoo Weather
3.) Install Yahoo Weather from Play Store

hi @laikexpert
first of all thanks for your work.
I've noticed two things so far, using this ROM:
-when recording videos there's a strange noise, like a radio... don't know
-I'm not able to see notification for services in push mode, whatsapp works flawlessly, but gmail, for example, doesn't.
any help? thanks again mate

-Viber
-gmail
etc.
works flawlessly on my phone
-------------------------------------------------------
System settings/Display/LED Notification light
(all options enabled)
System settings/Battery/Smart battery for apps
(Disable auto-cleaning)

laikexpert said:
-Viber
-gmail
etc.
works flawlessly on my phone
-------------------------------------------------------
System settings/Display/LED Notification light
(all options enabled)
System settings/Battery/Smart battery for apps
(Disable auto-cleaning)
Click to expand...
Click to collapse
don't know...
now push notifications work....
but the rear camera does not work anymore....
It doesn't recognize rear camera... even with other apps (wa,open camera) it allows just the front camera.... what happened? do I have to flash it again?
checking with device specs app it doesn't see it, just the front facing one

fefferico said:
don't know...
now push notifications work....
but the rear camera does not work anymore....
It doesn't recognize rear camera... even with other apps (wa,open camera) it allows just the front camera.... what happened? do I have to flash it again?
checking with device specs app it doesn't see it, just the front facing one
Click to expand...
Click to collapse
Did you flash it with clean install? (data, cache, Dalvik wipe)

Yeah mate...but even with the aosp version it says that there's no rear camera. Tonight once home I'll try to flash the version that came with the device itself.. But it seems to me a hw fault.. Even with no falls, just 4days

laikexpert said:
-Viber
-gmail
etc.
works flawlessly on my phone
-------------------------------------------------------
System settings/Display/LED Notification light
(all options enabled)
System settings/Battery/Smart battery for apps
(Disable auto-cleaning)
Click to expand...
Click to collapse
mega is not working for me .Please post any other links

Kanth's
BB72 012S
DOWNLOAD:
https://mega.nz/#!5IB10JCD!V968MBc_KOAOaMpz0XlJziX6aRJao8l-_s2UIYhQ5VM
Size: 1.30Gb
I tested the link is operating normally!

[DEV][Discontinued] WAS-Lxx [EU] Toolkit [0.0.0.5] All-in-One

INFO
I sold my P10 Lite, based on Huawei's decision to no longer provide bootloader unlock codes.
For a generic version of this project (ADB-Overlay) have a look at this thread.
The latest build of this project is still available.
---
Hello together,
here is a toolkit for the P10 Lite, it's designed to work primary with root (THE MOST TIME) so be careful what u are doing, specially if u are using the "Explorer". (Deleting the wrong file/folder on root lvl, could bring u in bad trouble!)
-
To all who used already my P9 Lite toolkit, there is currently not all available which u know from the old version, but i'll extend this toolkit in the next days. So, no worries about missing functions, they'll appear in some of the next builds.
-
About the usage,
- For a basic UI-Help just press F1
- If ur device is not detected u can switch off the "Device check" on the "Disclaimer" view (If u own a P10 which is not detected pls share a screenshot of the "adb devices -l" (l = lowercase L) command)
- U can also switch the (su -c) usage off (in the explorer view), BUT! after u performed any action which requires root, the trigger will be automatically switched on. (There is no other option, because my dll know only, use root or don't do so... There is no use root part-wise)
But anyways, i'm NOT responsible for any damage to your device!
Little preview of what u get
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tested Devices
Huawei P10 Lite [WAS-LX1A] [SINGLE-SIM]
Requirements
Platform: x86/x64 (Windows)
Frameworks: min. .NET 4
(Installed ADB/Fastboot driver)
Download
Mirror: See attachments
Mirror #1: GoogleDrive
XDA:DevDB Information
WAS-Lxx [EU] Toolkit, Tool/Utility for the Huawei P10 Lite
Contributors
k1ll3r8e
Version Information
Status: Stable
Current Stable Version: 0.0.0.5
Stable Release Date: 2018-08-01
Created 2018-03-30
Last Updated 2018-08-15

How-To
[Q:01] My device is not recognized by the toolkit?
1. Make sure NO adb-server is running!
2. U need to start ur device in android with enabled USB-Debugging (see the screenshot)
(Only in adb mode my toolkit can detect ur device)
3. Make sure that u granted adb access on ur device
(A popup will appear on the device and asks u to grant access.)
Try also to restart the toolkit after u granted access on ur device.
U can also check the device state by opening a cmd/terminal prompt and typing:
Code:
cd path\to\the\toolkit\adb
adb devices -l
check if ur device is listed as follows:
XXXXXXXXXXXXXXX device product:WAS-Lxx model:WAS-Lxx device:XXXXXXX
If ur device can't boot into Android or still didn't get detected, well, just deactivate the "Device Check" on the "Disclaimer" tab. And follow the description.
[Q:02] What does the Lxx Cxxx Bxxx mean?
The Lxx is the device model, the Cxxx is the region/operator identifier and the Bxxx is the build number.
Here is a short list about the regions/operators
ID (Cxxx) = Region/Operator | custom.bin (content)
----------------------------------------------------------------------------------------------------------------------------------------------------
C02 = Vodafone
C10 = Russia
C21 = Telefonica / O2
C40 = Czech Republic Telefonica / O2
C55 = Italia TIM
C66 = VIPmobile | vip/rs
C86 = Spain Yoigo
C109 = Amena/Orange
C112 = Latin America
C113 = Wind/Italy | wind/it
C121 = Türkei
C123 = Switzerland
C150 = T-Com | dt/de
C151 = India
C185 = North-Africa/Middle-East | hw/meafnaf
C209 = Asia (Pacific)
C212 = Iusacell/Nextel
C249 = Serbia Telekom
C432 = Nordic-European | hw/eu
C470 = Asia (Pacific)
C605 = Colombia
C637 = Spain
C636 = Asia-Pacific | hw/spcseas
C675 = India
C706 = New Zealand
C900 = GLOBAL
More comming soon...
Big THX for some of those "identifier" goes to:
@lost3
@baduncle
[Q:03] I want share my custom.bin & oeminfo, what i need to do?
U can get the files via the "Dual-/Single-SIM -> Export" or u can do the following steps (root required).
Open an terminal/cmd prompt and navigate to ur adb installation or the toolkit directory (path/to/the/toolkit/adb) and type the following commands.
Code:
adb shell
su
cat /data/custom.bin > /storage/emulated/0/custom.bin.bak
dd if=/dev/block/platform/hi_mci.0/by-name/oeminfo of=/storage/emulated/0/oeminfo.img.bak
exit
exit
adb pull /storage/emulated/0/custom.bin.bak custom.bin.bak
adb pull /storage/emulated/0/oeminfo.img.bak oeminfo.img.bak
Now u have 2 files, the custom.bin.bak and the oeminfo.img.bak just zip them and upload them to GoogleDrive or DropBox, etc. and share the link in this thread.
[Q:04] How can i manually boot into a specific mode?
Bootloader:
[device] = Turn the device off - Connect it to the PC - Press and hold: [Vol-]
[adb] = adb reboot bootloader
[fastboot] = fastboot reboot bootloader
E-Recovery:
[device] = Turn the device off - Connect it to the PC - Press and hold: [Vol+]
[adb] = N/A
[fastboot] = N/A
Recovery:
[device] = Turn the device off - Disconnect it from the PC - Press and hold: [Vol+ Power]
[adb] = adb reboot recovery
[fastboot] = N/A
Normal Boot:
[device] = Power button / Power button menu
[adb] = adb reboot
[fastboot] = fastboot reboot
Update Mode:
[device] = Turn the device off - Disconnect it from the PC - Press and hold [Vol+ Vol- Power]
[adb] = N/A
[fastboot] = N/A
[Q:05] Does the Dual-Sim upgrade survive an OTA?
Yes, the Dual-Sim modification will stay until u flash another oeminfo.
[Q:06] I upgraded to Dual-SIM and there is only one IMEI shown?
That's absolute normal... Because, u had a single-sim device before, so the device hold only one IMEI and the 2cd sim will use the same IMEI as the 1st sim or as shown the "0000000000000000".

Changelog
2018-08-01 - 0.0.0.5
* Added a Remote-Desktop
* Added a "partition selector" (recovery [Nougat], recovery_ramdisk [Oreo])
* Added a rooting option for Oreo
* Fixed a few bugs
* Realigned a few container
2018-04-21 - 0.0.0.4
* Added on the Device-Info view the BusyBox check
* Added the Phone control
* Added the Root menu (just waiting for permissions to include a zip)
* Added some features to the Explorer "View" menu (e.g. Sync with Treeview, Layout, Sort)
* Added a Display-Trigger to the "Power-Button" menu
2018-04-10 - 0.0.0.3
* Fixed a crash which appeared during device connection on the Explorer view
* Switched the whole window stuff to my new GlassWindow
* Added a AlphaChannelSlider (left beside the [--] button) for those which don't like transparent windows
* Added a Device-Info view
2018-04-01 - 0.0.0.2
* Fixed the icon bug (Big Icons, List)
* Re-positioned the "View" menu and made 2 of them, one for each view
* Refactored the "Button" layout, that they match now with the rest of the dark theme
* Added a fallback color "#2C2C2C" for those who got maybe the error message that the Glass-Effect couldn't be applied
* Added the "Shell-Tools" menu
* Added the 1st tweak (Pro-Mode)

Bug-Tracker
*FIXED in 0.0.0.2
- Noticed already the missing icons in the "Explorer" (Big Icons + List)
(Bug is already solved and will be fixed in the next version)
Known-Issues
- The "Explorer" "Big Icons" looking a bit ugly, that's because the p/invokes won't give me the "Extra Large" icons... I still work on it, so maybe it's fixed in the next version.
--
Drag 'n' Drop on any Explorer view, from outside the Application won't work until u run everything as Admin... That's a Windows UAC restriction and based on the fact, that we need the right's to create/delete/modify files/folders under Win8++ on the system HDD. (Like ADB pull for export of the oeminfo and custom.bin)
Missing Tweaks from the P9 Lite Toolkit
- As the screenshot shows, i managed to activate the "Double-Tap" menu, but that's all... The Double-Tap it self doesn't work... So there will be no "tweak" for this. - (Additional Info: The Double-Tap works^^ But ONLY on the lock-screen... And ONLY to turn the screen off... What a joke...)
- USB-OTG, is not available because, so far i know, u need a special kernel for it. (Which i can't provide, atm)
- AppTwin, because it should be enabled on any P10 Lite by default
Little - Update (1+2+3+4)
- I added a screenshot of the upcoming release, with integrated "Phone" control. (Currently only Call/Dial works)
- Added another screeny, now (Call/Dial/Add) is possible. Add, needs still interaction on the device side, like which "provider" (Device, Google, etc.) u want to choose. Dial, will insert the number in the default dialer, or it gets captured by any USSD protection. Call, will immediately start a call to the provided number.
- Just tested to send USSD-Codes like "*#06#", but it seems that u really have to type them... Even sending "*#06" and manually type the "#" doesn't work... U have to delete and re-type the whole USSD-Code...
- Added the final look of the "Phone". (At least, Add, Call, Dial, Hang-Up) is now possible.
For those which also use XAML, here are the control-button-geometries i created:
Menu-Button
Code:
<Path Fill="{Binding Foreground, RelativeSource={RelativeSource AncestorType={x:Type Button}}}">
<Path.Data>
<GeometryGroup>
<EllipseGeometry Center="2,2" RadiusX="1.5" RadiusY="1.5"/>
<EllipseGeometry Center="7,2" RadiusX="1.5" RadiusY="1.5"/>
<EllipseGeometry Center="12,2" RadiusX="1.5" RadiusY="1.5"/>
<EllipseGeometry Center="2,6" RadiusX="1.5" RadiusY="1.5"/>
<EllipseGeometry Center="7,6" RadiusX="1.5" RadiusY="1.5"/>
<EllipseGeometry Center="12,6" RadiusX="1.5" RadiusY="1.5"/>
<EllipseGeometry Center="2,10" RadiusX="1.5" RadiusY="1.5"/>
<EllipseGeometry Center="7,10" RadiusX="1.5" RadiusY="1.5"/>
<EllipseGeometry Center="12,10" RadiusX="1.5" RadiusY="1.5"/>
<EllipseGeometry Center="7,14" RadiusX="1.5" RadiusY="1.5"/>
</GeometryGroup>
</Path.Data>
</Path>
Call-Button
Code:
<Path Data="M 1.25,5.55 A 8.5,8.5 0 1 1 0.75,7 Z M 5,9 8,13 13,5" Stroke="{Binding Foreground, RelativeSource={RelativeSource AncestorType={x:Type Button}}}" StrokeThickness="1"/>
Hang-Up-Button
Code:
<Path Data="M 1.25,5.55 A 8.5,8.5 0 1 1 0.75,7 Z M 5,13 13,5 M 5,5 13,13" Stroke="{Binding Foreground, RelativeSource={RelativeSource AncestorType={x:Type Button}}}" StrokeThickness="1"/>
Dial-Button
Code:
<Path Stroke="{Binding Foreground, RelativeSource={RelativeSource AncestorType={x:Type Button}}}" StrokeThickness="1">
<Path.Data>
<GeometryGroup>
<EllipseGeometry Center="9,9" RadiusX="8.5" RadiusY="8.5"/>
<EllipseGeometry Center="6,5" RadiusX="0.5" RadiusY="0.5"/>
<EllipseGeometry Center="9,5" RadiusX="0.5" RadiusY="0.5"/>
<EllipseGeometry Center="12,5" RadiusX="0.5" RadiusY="0.5"/>
<EllipseGeometry Center="6,8" RadiusX="0.5" RadiusY="0.5"/>
<EllipseGeometry Center="9,8" RadiusX="0.5" RadiusY="0.5"/>
<EllipseGeometry Center="12,8" RadiusX="0.5" RadiusY="0.5"/>
<EllipseGeometry Center="6,11" RadiusX="0.5" RadiusY="0.5"/>
<EllipseGeometry Center="9,11" RadiusX="0.5" RadiusY="0.5"/>
<EllipseGeometry Center="12,11" RadiusX="0.5" RadiusY="0.5"/>
<EllipseGeometry Center="9,14" RadiusX="0.5" RadiusY="0.5"/>
</GeometryGroup>
</Path.Data>
</Path>
Delete-Button
Code:
<Path Data="M 0,7.7 5,2 16,3 16,12 5,13 Z M 8,5 13,10 M 8,10 13,5" Stroke="{Binding Foreground, RelativeSource={RelativeSource AncestorType={x:Type Button}}}" StrokeThickness="1"/>

WAS-LX1AC432B204dual
oeminfo

WAS-LX1AC432B206dual
oeminfo

I tested it on my WAS-LX1 C10 DS/ It works.

Perfect
Thank you !

rom issue
Dear Developer!
I suffering with a strange problem, i also opened a question thread about:
https://forum.xda-developers.com/p10-lite/help/please-help-fix-issue-t3805333
I'm not tried your toolkit yet, but i guess it maybe could help me... First: I would like to ask you what do you think about my issue(?). Probably you are much more technical than me, if you were able to create a toolkit for p10 lite... Should i try to fix my phone with your toolkit or can you suggest me any method? Do you have any idea what I could do?
Thanks you in advance!
Greets, NSX

nsx82 said:
Dear Developer!
I suffering with a strange problem, i also opened a question thread about:
https://forum.xda-developers.com/p10-lite/help/please-help-fix-issue-t3805333
I'm not tried your toolkit yet, but i guess it maybe could help me... First: I would like to ask you what do you think about my issue(?). Probably you are much more technical than me, if you were able to create a toolkit for p10 lite... Should i try to fix my phone with your toolkit or can you suggest me any method? Do you have any idea what I could do?
Thanks you in advance!
Greets, NSX
Click to expand...
Click to collapse
Use only stock ROMs for now, cuz there's no daily driver Customs for P10 Lite yet. Stock Oreo is really good. You can use HwOTA to flash stock ROMs.

nsx82 said:
Dear Developer!
I suffering with a strange problem, i also opened a question thread about:
https://forum.xda-developers.com/p10-lite/help/please-help-fix-issue-t3805333
I'm not tried your toolkit yet, but i guess it maybe could help me... First: I would like to ask you what do you think about my issue(?). Probably you are much more technical than me, if you were able to create a toolkit for p10 lite... Should i try to fix my phone with your toolkit or can you suggest me any method? Do you have any idea what I could do?
Thanks you in advance!
Greets, NSX
Click to expand...
Click to collapse
Heyho,
the "NRD-testkeys" are normally an issue with the "cust" partition. That means that ur oeminfo doesn't match with ur "cust" version. Let me explain... If u switch from SS to DS u change the device model (ID - Lx1 -> L21) this causes some problems on the "cust", because there is only one folder existent. The folder matching to the device u had before the switch. So all settings like "phone/umts" etc. are now invalid and can't be found under this model (ID). Because the folder simply doesn't exists.
How to fix it?!
U have to install/flash a complete stock rom via dload. - Get u FOR EXAMPLE an oeminfo like "L21AC432B183" and the rom "L21AC432B183", now u have to flash the oeminfo and straight after it, via dload, the FW upgrade.
-
During the flash of the "L21AC432B183" the system will check that u have "now" a L21 and will align the "cust" to that device.
Hope i could help u to understand how things work
Regards,
Sebastian

k1ll3r8e said:
Heyho,
the "NRD-testkeys" are normally an issue with the "cust" partition. That means that ur oeminfo doesn't match with ur "cust" version. Let me explain... If u switch from SS to DS u change the device model (ID - Lx1 -> L21) this causes some problems on the "cust", because there is only one folder existent. The folder matching to the device u had before the switch. So all settings like "phone/umts" etc. are now invalid and can't be found under this model (ID). Because the folder simply doesn't exists.
How to fix it?!
U have to install/flash a complete stock rom via dload. - Get u FOR EXAMPLE an oeminfo like "L21AC432B183" and the rom "L21AC432B183", now u have to flash the oeminfo and straight after it, via dload, the FW upgrade.
-
During the flash of the "L21AC432B183" the system will check that u have "now" a L21 and will align the "cust" to that device.
Hope i could help u to understand how things work
Regards,
Sebastian
Click to expand...
Click to collapse
Thank you very much for your help. im going to try all of this on next weekend, because workdays i have to use my phone.
greets, NSX
---------- Post added at 12:18 PM ---------- Previous post was at 11:59 AM ----------
k1ll3r8e said:
If u switch from SS to DS u change the device model (ID - Lx1 -> L21) this causes some problems on the "cust", because there is only one folder existent.
Click to expand...
Click to collapse
just a quick question: lx1 is single sim and l21 for dual sim?
Because i had a dual sim model but my sw version was lx1
did i misunderstood something?
btw, i having a very strange problem with the phone, out of the box. seems like a sw render problem. for example in nova launcher i have strange animation distortion and diatorted masking. i was hoping it will be fixed too with changing the rom but this problem still exist.. do you thing it can be because of some wrong factory software inatallation?
thanks, NSX

nsx82 said:
Thank you very much for your help. im going to try all of this on next weekend, because workdays i have to use my phone.
greets, NSX
---
just a quick question: lx1 is single sim and l21 for dual sim?
Because i had a dual sim model but my sw version was lx1
did i misunderstood something?
btw, i having a very strange problem with the phone, out of the box. seems like a sw render problem. for example in nova launcher i have strange animation distortion and diatorted masking. i was hoping it will be fixed too with changing the rom but this problem still exist.. do you thing it can be because of some wrong factory software inatallation?
thanks, NSX
Click to expand...
Click to collapse
Heyho,
np
-
Yes, the "Lx1" are always the SS and the "L[1-9]1" are the DS variants. - Btw. u can't see the "real ID" under "Settings -> Info" to see the "real ID" u have to look in the "current" oeminfo.
-
I wrote a tool for this kind of tweaking/exploring, have a look at it, u can get it here
EDIT:
About the issue with the display/animations, it could also be a problem with the HW... I have seen a few forum posts about "factory delivered" broken chips etc.... Maybe there is something else wrong, if it was really from the 1st day u got it.
Regards,
Sebastian

Little Update
Heyho together
-
Here is a little preview of the upcoming update.
* Added a Remote-Desktop (touch, swipe and keyboard are working so far)
* Improved the speed
* Fixed a few minor bugs
Release should be in 2-3 days
Version 0.0.0.5 is online!
Regards,
Sebastian

k1ll3r8e said:
[Q:03] I want share my custom.bin & oeminfo, what i need to do?
U can get the files via the "Dual-/Single-SIM -> Export" or u can do the following steps (root required).
Open an terminal/cmd prompt and navigate to ur adb installation or the toolkit directory (path/to/the/toolkit/adb) and type the following commands.
Code:
adb shell
su
cat /data/custom.bin > /storage/emulated/0/custom.bin.bak
dd if=/dev/block/platform/hi_mci.0/by-name/oeminfo of=/storage/emulated/0/oeminfo.img.bak
exit
exit
adb pull /storage/emulated/0/custom.bin.bak custom.bin.bak
adb pull /storage/emulated/0/oeminfo.img.bak oeminfo.img.bak
Now u have 2 files, the custom.bin.bak and the oeminfo.img.bak just zip them and upload them to GoogleDrive or DropBox, etc. and share the link in this thread.
Click to expand...
Click to collapse
I guess your Q&A kind of answers my question, though I want to be absolutely sure:
Sharing your oeminfo (and/or custom.bin) file(s) with others, does not give away any personal/unique info. I checked my oeminfo with a HexEditor and it seems to include my Firmware upgrade history (at least the last two updates), IMSI (only SIM/Network Operator - unless I overlooked something), and those hmac/&token values. With these infos nobody should be able to "do bad stuff" - am I right?
Please correct me if I'm wrong. Thanks in advance for any input, cheers!

callmeWhiskers said:
I guess your Q&A kind of answers my question, though I want to be absolutely sure:
Sharing your oeminfo (and/or custom.bin) file(s) with others, does not give away any personal/unique info. I checked my oeminfo with a HexEditor and it seems to include my Firmware upgrade history (at least the last two updates), IMSI (only SIM/Network Operator - unless I overlooked something), and those hmac/&token values. With these infos nobody should be able to "do bad stuff" - am I right?
Please correct me if I'm wrong. Thanks in advance for any input, cheers!
Click to expand...
Click to collapse
Heyho,
if you would have used my OEMInfo Tools, you would have seen that those values are no secret.
-
For example, the FW builds are needed to determine the current OS and if needed, the fallback/restore versions. Also the HMAC is needed for the OTA (the HMAC is used in conjunction with your IMEI, so the HMAC alone, is worth nothing). There is also a "Tamper-State" when and how often you unlocked/rooted your device.
But so far i saw, there are no "personal" data, like the IMEI or the SIM-Card Number. Maybe they are stored as one of those checksums (md5/sha1).
Regards,
Sebastian

k1ll3r8e said:
if you would have used my OEMInfo Tools, you would have seen that those values are no secret.
-
For example, the FW builds are needed to determine the current OS and if needed, the fallback/restore versions. Also the HMAC is needed for the OTA (the HMAC is used in conjunction with your IMEI, so the HMAC alone, is worth nothing). There is also a "Tamper-State" when and how often you unlocked/rooted your device.
But so far i saw, there are no "personal" data, like the IMEI or the SIM-Card Number. Maybe they are stored as one of those checksums (md5/sha1).
Click to expand...
Click to collapse
Thank you very much for clarifying and shedding some light on this, Sebastian!
From what I've read, reconstructing (files) from checksums doesn't (really/easily) work - though in theory (if enough additional parameters are given, and IMEI/IMSI are kind of short strings) it could be reverse engineered - unless I interpreted my research findings wrong :victory:
I assume it's safe though
Liebe Grüße nach Delmenhorst!

Hi world(first post since android(previous windows mobile member of xda)),
I have P10 lite for almost a year(not rooted for warranty issues).
I wanted to perform a stock firmware backup before I endulge in rooting/custom ROM.
Is that possible with TWRP(with or without rooting), and are there any how-to's?
Sorry for being such a newbie, just like to upgrade to 8.0 and revert back to stock in case of a problem or warranty issues.
Thank you.

Recovery