Hey everyone, this is my first post here so I'm not entirely sure this is the right place to pose this question. Earlier today, I made the decision to upgrade my Dash to WinMobile 6.1 using the resources here at this forum. The upgrade went nearly flawlessly with the excption that I need to copy the correct keyboard settings cab file still. However, I'm unable to do that because of Activesync.
I had 4.2 installed on my laptop and it never gave me any problems. Unfortunately, the phone displayed a message that I needed to upgrade to 4.5 in order to connect to the PC using Activesync. I downloaded the file from Microsoft's website and tried to run the install program. After clicking the "install" prompt, I get the following error message: "The System Cannot Open the Device or File Specified" Retry or Cancel. Retry gets me no where. I have spent at least 5 hours not trying to find a solution to this problem including a LOT of searching on Google, here, Microsoft's site and other places. NOTHING. I've seen a couple of references to this problem but no definitive solution to the problem.
A few things I have tried: Disable Firewall; uninstall Activesync 4.2 (curiously, after using the Add/Remove Program tool in the Control Paner, there was still an Activesync folder and dozens of files on my hard drive...I manually deleted as many of these as I could); Ran a file called "fixmapi.exe"; and I downloaded the upgrade file from multiple sources, all of which were suggestions I came across during the day.
I'm sooo frustrated because I can't update the keyboard map, I cant synchronize the hundreds of contacts and calendar items I have in Outlook, the phone feels completely useless to me at the moment and I cant believe that this is such an unusual problem (which is my conclusion based on such a complete lack of guidance on this issue).
anything anyone can offer will be HUGELY appreciated!
Hi, Need some help here....tired of the same whole mix-mash from htc (recycled phones) so going back to basics - htc s620 (wm6) + my just acquired used 4700. Intend to upgrade it to WM6.1, I've been using htc phones so I am used to rom flashing... or so i thought. I downloaded some of the wm6 and 6.1 roms only to find that dont come with an ruu built in. Not a problem I thought,just get a carrier and replace the nbf file. Unfortunately despite an extensive search on brighthand and here and yahoo searches galore i havent been able to find a suitable guide with the necessary utilities to carry out the flash. The "universal bootLoader" no longer seems to be around (404 errors) samething with other Ruu's (from ru websites etc) yet I can still see thru the long 220 - 251 pg threads that people are flashing with something. In the interest of new 4700 owners would it be possible to have a particular "How-to-flash" thread possibly as a sticky? If not at least can someone help me with a how-to guide and any link to the relevant ruu or bootLoader utility for the rom flash.
Thanx all appreciate it.
You can find all the neccessary information on this page; different ROM's, a bootloader, and instructions in PDF format..
Thanks a lot ridolfo. that has helped a great deal. Slight problem that you hopefully know a way around. After downloading the BootLoader.exe rar file, I tried to open it to proceed but it kept on coming up with an error... "windows cannot open the selected path file...you may not have the appropriate permissions to open them" I just cant get past that altough it has apparently opened and expanded showing a whole lot of other files but i cannot basically get past that stage to run the rom nbf file... Any ideas please?
Right sorted!
Very simple but unexpected solution especially since i hadn't seen the issue mentioned elsewhere.
Simply disconnected all connections to the internet especially wifi (for safety/protection etc) and then disabled zone alarm!
Everything went thru as normal,updated and now just waiting for boot-up.
thanx a lot Ridolfo!!!
Help!
I was messing around with the Ubuntu on Rhodium stuff that's posted in the Android sub-forum and I think something got corrupted/overwritten on my phone...
I extracted all the files on to a freshly formatted card and ran haret and everything worked file and I eventually got to the Ubuntu desktop. Then I did a soft reset to get back to WM and then the problems started.
I cannot run any unsigned apps whether they are installed on the storage card or internal memory. Whenever I try and run an app I get an error saying "The file blah cannot be opened either it is not signed with a trusted certificate...".
I cannot get back into Android or Ubuntu coz haret is unsigned too.
I cannot even install new apps! When I run the cab file, I get the usual "This program is from an unknown publisher..." and when I select yes for continue it immediately comes up with "Installation of blah was unsuccessful."
Time for a hard reset? I'd really prefer not to if anyone can suggest a better way of getting my phone back to how it was.
R.
Tried installing this?
As I said in my original post, I cannot install any CABs that come from "Unknown Publishers" too and it seems that TP2-AppUnlock is one of those.
Thanks for trying,
R.
there is a setting somewhere for this. i saw it the other day while setting up a new rom.pretty sure
same problem
I have encountered the exact same issue...except that for me it occurred after booting back into WM after trying out the latest android build. Anyone have a solution?
dicko99 said:
Help!
I was messing around with the Ubuntu on Rhodium stuff that's posted in the Android sub-forum and I think something got corrupted/overwritten on my phone...
I extracted all the files on to a freshly formatted card and ran haret and everything worked file and I eventually got to the Ubuntu desktop. Then I did a soft reset to get back to WM and then the problems started.
I cannot run any unsigned apps whether they are installed on the storage card or internal memory. Whenever I try and run an app I get an error saying "The file blah cannot be opened either it is not signed with a trusted certificate...".
I cannot get back into Android or Ubuntu coz haret is unsigned too.
I cannot even install new apps! When I run the cab file, I get the usual "This program is from an unknown publisher..." and when I select yes for continue it immediately comes up with "Installation of blah was unsuccessful."
Time for a hard reset? I'd really prefer not to if anyone can suggest a better way of getting my phone back to how it was.
R.
Click to expand...
Click to collapse
Just found this thread that is supposed to fix the problem: http://forum.xda-developers.com/showthread.php?t=404170
I've already hard-reset my phone so I can't test it...
I too had the same problem but with the HTC hd2. I was trying out a 2.2 rom n the camera wasn't working so I turned off the phone, when I tried going to back android haret wouldn't run .if anybody has a fix to this please let me know.
Hi there,
Have you tried the "Security configuration Manager" mentioned in the thread linked to above?
I can't test it coz I haven't broken my phone again since the initial issue but for future reference I'd like to know if it cures the problem.
Hope this helps,
Richard
Yes i've tried security configuration manager but it still wouldn't work. Does doing the hard rest work? Thanks for the help
Yes, hard reset works.
I've used it on two occasions to fix this problem.
Regards,
Richard
after using config manager i cannot sync with outlook
i am still having the issue with certificates after runnig android and rebooting HD2
any help?
i am in mexico HTC HD2 unlocked if i make a hard reset i am going to loose unlocked feature right?
Hi. I just recently purchased an HTC Touch Pro2 from T-Mobile running WinMo 6.5. That being said, I have not been able to open any cab files on the device to install some software. Basically I'll transfer the cab to the device and attempt to open it. I get one of three messages depending on the app I guess. the most basic is "Installation was unsuccessful" to "Installation was unsuccessful. The program or setting...not digitally signed...trusted certificate" (this was from MobileFTPClient). Installing Opera Mini 5 gives a simple: "Installation of mini5wm.cab was unsuccessful".
Ok, so being a software developer for 10 years I've been looking into some registry values and can't seem to find what I need to get anything to install. If I download from the Windows Marketplace that's all good, but nothing else.
What do I need to do to be able to install cab flils directly? Honestly if I can't get this to work this phone is going back. I moved from an iPhone to this phone specifically so I can install apps and monkey around with the device, but so far I'm done before I started.
Thanks for any info you can give me.
its in one of your phone/device settings to let u download and install apps or cabs not digitally signed. thats all, i believe. just find it and check it off. or look for advanced config cab if u can find it and install that. it has an option in there also to let u download/install whatever..
mullethunter said:
Hi. I just recently purchased an HTC Touch Pro2 from T-Mobile running WinMo 6.5. That being said, I have not been able to open any cab files on the device to install some software. Basically I'll transfer the cab to the device and attempt to open it. I get one of three messages depending on the app I guess. the most basic is "Installation was unsuccessful" to "Installation was unsuccessful. The program or setting...not digitally signed...trusted certificate" (this was from MobileFTPClient). Installing Opera Mini 5 gives a simple: "Installation of mini5wm.cab was unsuccessful".
Ok, so being a software developer for 10 years I've been looking into some registry values and can't seem to find what I need to get anything to install. If I download from the Windows Marketplace that's all good, but nothing else.
What do I need to do to be able to install cab flils directly? Honestly if I can't get this to work this phone is going back. I moved from an iPhone to this phone specifically so I can install apps and monkey around with the device, but so far I'm done before I started.
Thanks for any info you can give me.
Click to expand...
Click to collapse
The cab I have attached may help you...it's some SDK certificates that will allow installation of certain unsigned apps, but I don't know if this is what the ones you're running are requiring and missing. It won't harm anything to try this one, and you can easily uninstall it if it doesn't do the trick
Thanks guys. Sirphunkee - that cab actually installed, but I'm having the same problem. Another forum has suggested that I take the device back to T-Mobile, but it just seems like there's a setting that's not right in the OS. Demandarin - I've looked for various security permissions in the UI with no luck. I've mucked around with some Policy values in the registry per some threads on this forum, but still nothing.
I'll keep trying, and thanks.
So...weird; Opera Mini and Weather Bug (well known apps) wouldn't install, but an SMS notification disable cab installed (from the xda site) as did Evernote (evernote.com). I have no clue what the deal is, but it's getting beyond stupid that I can't install just any cab file.
mullethunter said:
So...weird; Opera Mini and Weather Bug (well known apps) wouldn't install, but an SMS notification disable cab installed (from the xda site) as did Evernote (evernote.com). I have no clue what the deal is, but it's getting beyond stupid that I can't install just any cab file.
Click to expand...
Click to collapse
Have you already installed .Net 3.5? It's a framework that many other programs use (and need) to install, and it's not on the TP2 by default...it's the only other think I could think of that would keep you from installing stuff. Cab is attached, if you don't have it already.
Got it. I installed the Device Security Manager PowerToy and was able to change the configuration there. Opera Mini 5 just installed.
Never would have thought the phone would come that locked down, but so far so good. Thanks for all of the ideas.
mullethunter said:
Got it. I installed the Device Security Manager PowerToy and was able to change the configuration there. Opera Mini 5 just installed.
Never would have thought the phone would come that locked down, but so far so good. Thanks for all of the ideas.
Click to expand...
Click to collapse
Well yeah what's weird is that I never had to use that to get any of those apps installed
On CodePlex I have published my app for tracking working time.
It is based on the SenseUI SDK.
SenseTimeTracker
For furter feature development either this thread can be used or the discussions in CodePlex.
After getting some feedback according to installation problems, I figured out, that the deployed .cab file does not contain the SQL Server Compact 3.5.
This has to be installed manually until I do not provide a msi-setup.
Explanation on how to install the .NET Compact Framwork 3.5 and/or the SQL Server Compact 3.5 has been added on the CodePlex page.
Version history:
Version 1.3
* Length checking of input fields
* Bug fixed with reports when first time card has date in january
* Issue with localization fixed
* Category edit form localized
* Creating new category did throw an excexption
* Default category is hidden in category list
Version 1.2
* cab file now creates a shortcut
* new version detection added
Version 1.1
* Initial release after UI redesign
Installation Procedure
Hi, Could you explain the Installation procedure, other than download and install is there any other additional requirement to get this program up and running?
Thanks
Download the cab file, copy to your mobile device and run it from there.
This shall install SenseTimeTracker on you mobile device.
Let me know if it doesn't, since it is my first publishing. I only installed it on my device or the emulator.
Test
OK! I downloaded you app, installed and found the following problem, btw I am on a Blackstone using G10 Dusk Ultimate 2 v 8.31
1) There is no icon present for your apps in the programs menu.
I went to programs found the your app and try starting it from there, I got the following error
Ok, SQL server was not deployed. I will try to fix this and provide an update.
On my devices there has been SQLCE installed, so I didn't recognize it.
Thanks for the hint.
wesch00 said:
Ok, SQL server was not deployed. I will try to fix this and provide an update.
On my devices there has been SQLCE installed, so I didn't recognize it.
Thanks for the hint.
Click to expand...
Click to collapse
No problem was glad to help, I was looking for a program like that for sometime now , I will test again when you update
You have to install the SQL Server Compact manually, sorry.
See my explanation in CodePlex.
zjxpot said:
OK! I downloaded you app, installed and found the following problem, btw I am on a Blackstone using G10 Dusk Ultimate 2 v 8.31
1) There is no icon present for your apps in the programs menu.
I went to programs found the your app and try starting it from there, I got the following error
Click to expand...
Click to collapse
wesch00 said:
You have to install the SQL Server Compact manually, sorry.
See my explanation in CodePlex.
Click to expand...
Click to collapse
Hi I downloaded and follow your instructions regarding the installation process and got the top half of the error I posted above when I tried starting the apps also no icon was installed in programs menu I tried it on G10 Ultimate 2 v8.40 release today
The icon issue I couldn't check yesterday, will do that asap. Did a lot of research how to deploy SQL Server Compact.
But could you run the app?
wesch00 said:
The icon issue I couldn't check yesterday, will do that asap. Did a lot of research how to deploy SQL Server Compact.
But could you run the app?
Click to expand...
Click to collapse
No, its not running, when I try runnunig it I get the same error box but only the top half of the message the bottom half is gone.
That makes no sense since allways an explanation of the exception is displayed.
If you installed the SQL Server Compact, can you try to delete the whole SenseTimeTracker folder in the program as well as in the documents directory (if there is one) and reinstall the cab again.
I checked this yesterday on a clean emulator and it worked. So without any further hints I cannot guess the problem.
Are you familar with developing smart device aps. Then I can send you the project for visual studio and you can try to deploy it from within VS. That shall work. Let me know.
I suggest to contact me via pm, I will help you to fix your problem.
wesch00 said:
That makes no sense since allways an explanation of the exception is displayed.
If you installed the SQL Server Compact, can you try to delete the whole SenseTimeTracker folder in the program as well as in the documents directory (if there is one) and reinstall the cab again.
I checked this yesterday on a clean emulator and it worked. So without any further hints I cannot guess the problem.
Are you familar with developing smart device aps. Then I can send you the project for visual studio and you can try to deploy it from within VS. That shall work. Let me know.
I suggest to contact me via pm, I will help you to fix your problem.
Click to expand...
Click to collapse
Hi, I flashed an orginal HD rom, installed net, sql and then your apps went to programs and started timetracker and it worked, I reflashed a cooked rom did the installation and it also worked I tried entering some information I got some error that require me to restart timetracker one of the error is attached, I will flash G10 rom again as this is my rom of choice and I will let you know how that went
I must say thanks for what I have seen so far if I get it working on G10 rom I will do some more in dept testing.
Thanks again for sharing
Ok, I see, it has nothing to do with your ROM.
I think there is a bug with the categories which only occurs on an empty/fresh database. On my tests I've had everytome a filled one, since I implemented category support later on.
I had some minutes to try it on a fresh installtion. Unfortunatly I cannot reproduce this bug. Can you plz provide more info, what in which order you entered for getting this error. I first created a user which is mandatory. Then created a client, then a project for that client and then a task for that project. Now entering a timecard did work, since the default category ("unknown") was used. The error you've got is a key violation between task and category. This should not occour, but I need to know in what order you entered the data.
wesch00 said:
Ok, I see, it has nothing to do with your ROM.
I think there is a bug with the categories which only occurs on an empty/fresh database. On my tests I've had everytome a filled one, since I implemented category support later on.
I had some minutes to try it on a fresh installtion. Unfortunatly I cannot reproduce this bug. Can you plz provide more info, what in which order you entered for getting this error. I first created a user which is mandatory. Then created a client, then a project for that client and then a task for that project. Now entering a timecard did work, since the default category ("unknown") was used. The error you've got is a key violation between task and category. This should not occour, but I need to know in what order you entered the data.
Click to expand...
Click to collapse
Sorry for not replying sooner, I was trying some other roms but no luck getting this app to work on those other roms that I flash, for me its only working on stock and Energy GTX I am presently downloading a 6.5 rom to test all others has been 6.5.x.
I have been able to reproduce the error again and again, try this
Go to category select new and create a new category everything should be ok, create another one and it should crash, also I am unable to edit the category "unknown"
More Crashes
Hi, I did some more test and I got more errors I have attach one picture, let me try to explain
1) If I try to copy the TimCard it crashes
2) TaskName is to long it crahes
I got a couple more crashes but I forgot where in the apps they occour however it seems that is not handling user input error well maybe a dialog box should appear and tell the user that the TaskName is to long or something like that I also think you should try and test if all but most of the option like copy, remove, edit, maybe it my rom related but you could still check just to be sure.
Thx again for the responses.
Couls get it allready run with the other ROMs? I have no opinion about these ROMs. I do not use any special functiuons, it is only .Net-code. The only explanation I have would be that there are problems with drawing. Bit this is done by the SenseUI framework which I cannot modify or debug.
Now to the issues.
The Category issue I could allready fix for me, will update it soon. Dont use categores for the mean while, use only "Unknow". You can change it later when it works. The "Unknow" category should not be editable, I will hide it in the next release.
The issue with the task names beeing too long is a bit more difficult to fix, I'll try to find a solution (need a common one since this will be happen with all inputs).
For the issue with copying a time card, I need a screendum of the error. I use copying of time cards allmost every day and never had problems. So it should be some special in your entries. If I have the error output, I hope to have an idea.
wesch00 said:
Thx again for the responses.
Couls get it allready run with the other ROMs? I have no opinion about these ROMs. I do not use any special functiuons, it is only .Net-code. The only explanation I have would be that there are problems with drawing. Bit this is done by the SenseUI framework which I cannot modify or debug.
Now to the issues.
The Category issue I could allready fix for me, will update it soon. Dont use categores for the mean while, use only "Unknow". You can change it later when it works. The "Unknow" category should not be editable, I will hide it in the next release.
The issue with the task names beeing too long is a bit more difficult to fix, I'll try to find a solution (need a common one since this will be happen with all inputs).
For the issue with copying a time card, I need a screendum of the error. I use copying of time cards allmost every day and never had problems. So it should be some special in your entries. If I have the error output, I hope to have an idea.
Click to expand...
Click to collapse
Hi, I have flashed back to my rom of choice as I need it for work, I also used an apps name Pocket Time, I was hoping to get your working as your is mor mordern and has more options, anyway I will be able to test your program again this weekend and I its working for me I will change my rom and start using your apps I like it.
I have attach the detail section or the Task Name error for you to look at also I have attach the error and the error detail section of G10 rom maybe from those pictures you can figrue why it dosent start
The last five is from G10
Thanks
Thx for the dumps.
As I allready wrote, the problem with the length of the description is a common problem. I did know, that it wasn't checked. I will release a new version today (1.3) which supports those checks.
The other problem has something to do with the serialisation/deserialisation of the user settings. These are stored in an XML-file in the application directory. And it seems, that the existing date time format has problems.
Is the language of your G10 ROM a different than the default ROM? I assume, you have created the XML the first time with on ROM and now trying to read it with another on. And the DateTime format of both are different and cannot be parsed.
Try to delete the xml-file in the app directory and start the app again with the G10 ROM. Let me know, if this solved the problem. May be I can then find a solution therefor. If you delete the xml-File, you will be asked for selecting a user. Select you previous eneterd user. If you navigate away from the user panel, you will be asked for the password you entered previously.
If you not allready entered sensitive data, you can send my the database (sdf-file) and the xml-file. Then I can try to debug it. I've had a lokk into the xml-file and saw there are only two time fields where the time is entered as 8:00:00 and 17:00:00. If this format is not valid on your ROM due to another culture, then this may cause the error you posted. What is the usual time format on your country?
Then I have a question according this ROM. The error occurs in Deserialize while reading a DateTime value. I have a try-parse in the deserializing section. So no exception should be thrown by the app. If there is an error in the XML file, defaults are used. I did try this on my device and ti worked that way. So I really do not know, why the exception is thrown. Ist there any special in your ROM handling exceptions?
wesch00 said:
Thx for the dumps.
As I allready wrote, the problem with the length of the description is a common problem. I did know, that it wasn't checked. I will release a new version today (1.3) which supports those checks.
The other problem has something to do with the serialisation/deserialisation of the user settings. These are stored in an XML-file in the application directory. And it seems, that the existing date time format has problems.
Is the language of your G10 ROM a different than the default ROM? I assume, you have created the XML the first time with on ROM and now trying to read it with another on. And the DateTime format of both are different and cannot be parsed.
Try to delete the xml-file in the app directory and start the app again with the G10 ROM. Let me know, if this solved the problem. May be I can then find a solution therefor. If you delete the xml-File, you will be asked for selecting a user. Select you previous eneterd user. If you navigate away from the user panel, you will be asked for the password you entered previously.
If you not allready entered sensitive data, you can send my the database (sdf-file) and the xml-file. Then I can try to debug it. I've had a lokk into the xml-file and saw there are only two time fields where the time is entered as 8:00:00 and 17:00:00. If this format is not valid on your ROM due to another culture, then this may cause the error you posted. What is the usual time format on your country?
Then I have a question according this ROM. The error occurs in Deserialize while reading a DateTime value. I have a try-parse in the deserializing section. So no exception should be thrown by the app. If there is an error in the XML file, defaults are used. I did try this on my device and ti worked that way. So I really do not know, why the exception is thrown. Ist there any special in your ROM handling exceptions?
Click to expand...
Click to collapse
Hi, I am using the original G10 WWE Ultimate 2 v8.31 rom out of the box in fact all the ROM I have tried this app on has been out of the box, will try flashing and trying your app again this weekend.
Are you using your app on an original stock rom or a cooked rom?
I'm using the app on the updated but original HTC ROM. But it did also work on the nonupdated.
The description of you exception shows me, that the problem has something to do with the localized date time format. What localizaion do you use. And I think you've got it allready running with another ROM. What localization do you have there?
What I totally do not understand, in my opinion there should not be thrown an exception, since serialization is done within a try/catch block. If there is an deserialization error, it should be catched and defaults should be used, which I have testet.