Related
Dear XDA members,
After using my hox for a few months, (i absolutely love it..) i noticed a weird glitch..
While using my hox through the day, its fine.. i have no problems at all.
but: when i charge it at night, and use it before i go to sleep.. the problems occur.
problem 1: overheating while charging, phone gives an warning with its led (red-green-red-green)
problem 2: this problem is more instant, shaking when scrolling..
its the last problem that i really hate about my phone, if it charges my touchscreen becomes "shaky".
if i open a web-browser and scroll without charger plugged in.. everything is fine.
but if only the metal housing of the usb plug is touching the chargerport of my phone it starts doing funny stuff..
if i keep my finger on the screen, (after scrolling.. when i just stopped moving my finger across the screen)
my screen scrolls up and down very quickly.. and wont stop doing this untill i let my finger go.
this results in an vibrating effect.. like the text is vibrating in my screen..
but when i unplug the charger.. this problem is gone!
then add the overheating problem, and my phone becomes pretty annoying while charging..
its burning my fingers (while charging it will get up to 50 degrees, just by using youtube..) and i cant read normally with one of my fingers
touching the screen, because it will vibrate.
does anyone else have this problem?
i have the HTC_E11 (western europe) and im running android 4.0.4 (stock, unrooted)
besides that, i did not unlock the bootloader.. its like it just came out of the box.
note: this only happens with ALL wall chargers.. from different brands.
(2 htc chargers.. one from my old wildfire S and my new charger AND an samsung galaxy tab charger AND archos tablet charger)
this does not happen when plugged in to an pc, so i think its an grounding problem?
same with browsers.. this happens with all apps and browsers that have the functionality to scroll.
Well about 1,5 years ago I had a spare Motorola charger which was only 0,5A out, but used it when some friends came over and use my charger.
Both my old HD2 and my gf's Desire S became fuzzy with the screen when its plugged. It was clearly mis-tapping where I tap my finger, by very huge margin.
It reminded me that. The charger was rubbish.
mostly trying to avoid using any mobile device while charging but I did play angry birds while charging my HOX a few times, don't remember such a heat.
My HD2 used to respond incorrectly to touch with the stock charger. My HOX doesn't do it however, But if I plug it in to my HD2 charger it sometimes goes a little crazy.
It's easy for electromagnetic interference from a transformer mess with the digitizer in the screen. This is true of any device with a capacitive touch screen.
As for the shaky screen, that would be caused by noisy power being generated by the transformer, rather than a nice clean sine wave. This is common when you overload an AC/DC converter power supply. Try using one that's rated for 1.5mA and see if it helps.
It's unlikely it will damage the device, but it will charge less efficiently and cause some crazy behavior while it's plugged in.
i tried it with my 5v(usb), 1.5A adapter that i got with my tablet..
same problem, but overheating of the accu gets a bit worse
my original adapter has 1A, how much ampere does your adapter have?
I usually charge with a 1.5mA charger. Having said that, a lot of chargers seem to just have a random number stamped on them. I have seen tiny little chargers that claim up to 5A and only actually supply 500mA or less, so they get very overloaded.
An easy way to tell is to see how hot the power adapter is getting. If its appropriately rated for the current draw of the phone, it should get a little warm while charging. If it's getting hot, it's not up to the job and should be replaced.
The charging current should be limited by the charge circuit in the phone, so the higher the rating on the power supply you plug in to to charge, the cleaner the sine wave should be and the less issues you should get. The phone may just get a little warmer when charging due to more current being available. Again, this should be limited by the phone though.
Sentinel196 said:
The charging current should be limited by the charge circuit in the phone, so the higher the rating on the power supply you plug in to to charge, the cleaner the sine wave should be and the less issues you should get.
Click to expand...
Click to collapse
The charger output is DC, I'm not sure what sine wave you're talking about.
Okay, gonna try and explain this as best I can, bear with me.
2.5 years ago or something I got a Gnex from Verizon, brand new. The phone would act like a ghost was using it, like someone was interacting with the touchscreen. It'd randomly call contacts, send texts (random letters/numbers), all kinds of weird stuff. Video of it on day 1 HERE doing this. Took it into Verizon, got a new replacement. Never had the problem again. 2 or so years go by, not a single problem, unlocked, flash, all that, never had the problem again.
About a month ago, I upgraded to a Moto X and passed this phone on to a family member. At the time was running the latest stable Cyanogenmod ROM, the last for JB. 10.2 maybe? Anyway, that's what ROM was on it, again, no problems. Factory reset the phone to wipe my stuff, left it rooted and unlocked. I gave them the phone, battery, extended battery, and a few cases as well, no charger cause I know they'd twist up and destroy the factory cable. Setting the phone up for them battery starts going low, used their charger. Cable had shorts and crap, scavenged around looking for good charger. Get phone set up for them, and I'm done, handed off.
A day later, they're complaining that the phone is going crazy, like a ghost is using it, and it's randomly calling people, sending texts, opening menus, not charging, etc. Sounds like EXACT same issue I had with my very first Gnex that I exchanged. Figured that was really strange, maybe it was the software. Factory reset to latest factory image 4.2.2, lock BL back up, completely bone stock. Re-setup phone and all that jazz. Phone's acting fine. Decided this time that'd I'd let them have the original stock charger, thinking maybe that'd help with the charging issues too. All seems well....
However, during the reset and all, and after re-setting up the phone, battery is low.... plug it in with a known good charger of mine, but not stock original, and all the sudden the phone's freaking out again. Turn screen off, turns itself back on. Dialing people, opening apps on its own, etc. Figure maybe this Gnex just won't take any charger except it's original. Pull battery, reboot, phone's fine, fine for 10+ minutes. Plug in OEM charger this time, wait a few seconds, unplug, phone goes crazy.
Also interesting, they brought another charger of theirs with a little red LED on, plug it into wall, red LED comes on. Interestingly, if the charger is unplugged from wall with red LED off and I plug it into the phone.... the red LED on the wall charger turns on... that's not right. So.... here's where I'm at now. If I pull battery, reboot, and never attach a charger, the phone acts perfectly fine. The instant I plug in ANY charger, it'll start going wacko and continue to until I pull battery and reboot. At first I thought this was a charger issue, but now... I'm thinking it's battery related. This little experiment of getting the phone to go crazy after plugging in a charger applies to both the OEM and extended battery, regardless of what charger I use.
When I owned the phone, I almost exclusively used the OEM charger, occasionally another charger I had that I know works fine. Gave Gnex to family member WITHOUT a charger, so they were forced to use who know what condition phone charger. I'm wondering if maybe some rogue jacked up phone charger with shorts in it and crap somehow killed the extended battery. Then, they switched to the OEM battery, and again, unknowingly killed that battery too with the same crap charger. So maybe buying a new battery would fix the issue and only using the OEM charger from now on or the other one that was mine that I know works? Or maybe the phone is just broken now? It just doesn't seem right that plugging a phone into the micro-USB should turn ON the red LED on the charger when it's not plugged into the wall, like the power is coming out of phone and going into the LED...
I just refuse to believe that on the exact same day and within hours of me upgrading to a Moto X and passing on my Gnex that had worked perfectly for 2 years in my possession somehow just happens to "break" or "go bad" on its own. Thought it was software glitch/bug in CM, no. Thought it was incompatible charger, no. Maybe the batteries are bad? Maybe the phone's circuitry got jacked up too? Just seems weird that, as far as I can tell, pulling the battery and rebooting fixes it for good until the battery dies. Within 30 seconds of connecting a charger, the phone goes bonkers.
Any ideas? Feel bad, family member probably thinks I dumped a bad phone on them!
Thanks!
What kind of sorcery was that? I honestly don't know what to say about this other than bad timing? I highly doubt a ghost is possessing the phone.
I know a ghost isn't possessing the phone, I just, that's how I best described it when it was going wacko by itself. Plus, interesting topic title, maybe get a few more people to read it and maybe offer some advice or info or something :laugh:
However, I do have a ghost in my house, or a spirit or something. I've seen him, sitting on my couch before. He died in a fire, smoke inhalation, no smoke alarms in the house. House was sold, completely rebuilt, and I am first to live in it since then. Crazy story for a different forum lol
From what I can see, it's just that the screen isn't working properly because of leaked currents from the battery or the charger... Just get the whole screen replaced (it's hard to only replace the glass layer) and should be fine.
Sent from Google Nexus 4 @ CM11
Leaking currents, had it happen to me before from a bad charger. I doubt it's the battery, try an outlet in a different house, they may have bad power.
Sent from my Galaxy Nexus using Tapatalk
So this "leaking currents" problem, it's a problem with the battery? A problem with the phone, in particular, the screen? It definitely sounds like a rogue bad charger could have done this based on the feedback so far. The "damage" or whatever happened at their house. Just the other night, they brought the chargers and phone and stuff to my house, a different house, problem persisted. So I'm not thinking it's a dirty power issue or anything.
...and so you should have the screen replaced. I've had Motorola and HTC phones with issues responding to touches when charging, and replacing the screen largely eased the problem (although I still ended up getting a new charger because I don't want it to also damage the newly replaced screen).
Sent from Google Nexus 4 @ CM11
Op may also want to consider relocating... ghost home and ghost phone, that's too much!
LOL
Mike7143 said:
So this "leaking currents" problem, it's a problem with the battery? A problem with the phone, in particular, the screen? It definitely sounds like a rogue bad charger could have done this based on the feedback so far. The "damage" or whatever happened at their house. Just the other night, they brought the chargers and phone and stuff to my house, a different house, problem persisted. So I'm not thinking it's a dirty power issue or anything.
Click to expand...
Click to collapse
Could be the battery, could be the USB cables or chargers, could be the USB port on the device, could be the screen. The fact that it only happens when plugged in but with more than one charger and battery makes me suspect the USB port on the device. From my understanding you can buy a replacement. A temporary fix would be to use a charger that charges the battery outside of the phone.
Sent from my Galaxy Nexus using Tapatalk
No ghost... i think
I think its because the charger you use....
I had the same problem, but not with gnx... before gnx I used galaxy i5801...
when I put my mobile in charge, my mobile did some crazy things, like operating itself,...I figured out that the charger I used is not the one I shouldn't use.
every mobile has a charging limits, like voltage restriction..
little difference in voltage could make big difference.
so I changed the charger. problem solved for me.
other than charger.. there are some things can do this, I don't know about all.
I doubt it may caused by your digitizer...maybe is has too much sensitivity, caused by water, dust, pressure, etc....
digitizer and display are not the same.
I faced this one too ( galaxy i5801) before charging problem, but not with gnx.
A digitizer is the part of a touch screen that senses your touch and "digitizes" your gestures into impulses that the phone can understand as commands.
if it continues my last suggestion.... call the priest
Well, I borrowed an OEM standard and extended battery from a friend, neither fixed the problem. My friend did say that similar to my first Gnex, when he first got his, it did the same exact thing, but after a while it stopped and it hasn't done it ever since. I also narrowed it down, or, widened the issue, in that it's not just AC chargers, the exact same stuff happens with a brand new 12V car charger.
Dirty power on the fifth rail of a USB wire. Its either the charger not supplying enough power or a damaged cable.
Sent from my Galaxy Nexus using Tapatalk
My vote is on the screen, due to the digitiser. Replacing the touchscreen could help solve the problem. I was in your family's position when I got a used Motorola Cliq from a friend and the battery was all good, no leaks. Ghosts just started touching it everywhere like a crazed groupie when it went into my possession. No explanation as to why it happened and I didn't look into it that much but replacing the screen is the most likely solution.
Just got my M8 first time I turn it on it had half charged battery. I drained it to a point when I turned it on two times and than it went dead. I mean I could not turn it on. When I connected the charger no light came on and no response from phone. I leave it till toomorow and see if it will turn on.
I fear HTC is using the same chip for controling battery charge in M8 which if flawed by infamous HTC charging bug. If this is the case it is really start annoyng me and htc m8 will be my last HTC phone. I had so far Wildfire, Sensation ,Desire and all off them had a charging bug. Wildfire and Desire would not show the battery full even though battery voltage was at full charge. My luck? Or HTC has some poor quality components? My S2 still charges battery fine till today.
Ok. Anyone can check their M8 if you have charge bug if you battery is almost drained off power if it will turn on or stay dead?
If my won't wake up tommorow after all night at charging I'm gona exchange it on warranty and see another sample has the same charge bug.
Why HTC is not doing something with this CHARGE BUG on the newest devices? Puzzeles me.
I brought mine to 1%, cycled the power, then used it again till it died. Plugged it in, charging icon came on right away, charging light as well. Hope this answers your question, I didn't really read the whole post.
=)
Sent from my HTC One_M8 using xda
Visspui said:
I brought mine to 1%, cycled the power, then used it again till it died. Plugged it in, charging icon came on right away, charging light as well. Hope this answers your question, I didn't really read the whole post.
=)
Sent from my HTC One_M8 using xda
Click to expand...
Click to collapse
My M8 has just died because it wont charge, happened just yesterday. I left it plugged in over night and still nothing. Its a holiday here at the moment so have to wait until Wednesday for HTC to open.
Possibly The same Problem, Possibly Not?
andy905 said:
My M8 has just died because it wont charge, happened just yesterday. I left it plugged in over night and still nothing. Its a holiday here at the moment so have to wait until Wednesday for HTC to open.
Click to expand...
Click to collapse
Hi.
I've been having loads of problems having unlocked, rooted, S-Off, SuperCID & installing the ARHD ROM on my M8 (International) but it was, in a fashion, working. I too am on holiday & whilst I now know why I was having the issues & have the solution to them, I didn't have time before I left to resolve them. So, I brought it away with me to use for basic currency conversion & translation tasks & it was, as I say, functional. Last night, I decided to play a game on it & it was being laggy but I put this down to the issues I've been having, so didn't worry. It kept being laggy, so I tried restarting it to see if that would help but once it had powered down, it took ages to reboot, so I tried using the power button to switch it on. Again, it took ages & I briefly fell asleep but when I woke up, it had booted back into ARHD, so I figured all was okay.
However, when I awoke this morning, the device would not switch on. I plugged it in to see if something had caused the battery to drain during the night but nothing happens; the charging light doesn't come on & it doesn't power up, no matter how long I leave it! It is, to all intents & purposes, behaving as though it is dead (bricked?) but I don't know why it should suddenly do this, which is why I was looking for answers & came across this thread.
If anyone has any bright ideas, I'd be more than grateful to hear them
Mine needed a replacement charging board and chip unfortunately but HTC Vietnam was pretty fast, only took 3 days so wasn't too painful.
I like how "Happened to three people" == "infamous."
Yes, this sounds like a very isolated bug/defect. Since it is not reported by very many, the best course of action is RMA. ?
My T-mobile HTC ONE M8 has done this as well, however I was after serveral hours of trying everything I could think of, connecting it to the computer and various chargers and trying to hold volume up and power and replugging it to charger, it finally started charging. This has happened 2 times in the last 2 weeks.
Now that it's charging I wonder if HTC will take it and replace the charging board or battery. I also worry that I have it rooted and s=off that they won't honor the warranty.
There is something similar to this going on with mine - Was charging (maybe quite slowly), battery very low, phone reset. Booted into charging screen, amber light flashing. After a while (and trying to boot a few times), no light, nothing. Charge current is 0.00A
Edit: I remember something like this with the old Desire - there was a trick to reset the charging circuit, which was maybe locked up and not getting a good po_reset, so never enabling any charge. Something along the lines of unplug, hold some buttons for some time, plug, profit... Does anyone remember this in detail?
I had the issue in this topic, and got it solved.
Here are forums where I have found similar case and solution.
https://www.noppanit.com/htc-one-wont-turn-on-after-battery-completely-drained/9h53
http://www.pocketables.com/2015/06/htc-one-m9-unresponsive-no-charge-light-wont-power-on.html
http://forum.xda-developers.com/showthread.php?t=2481211
I have a particular case. My phone is a HTC One M8, but I have protected it with a special case with a battery extension, home made. I have assembled myself the batteries, chargers and boosters. My booster has a small issue and does not enter safe mode when battery is low. It warns about low batt with a LED, but still tries to deliver 5V. The booster is connected to the phone via a flat cable, stolen from a wireless charger; those chargers have the smallest USB plus I could find ever, and, I found this plug only in these decvices.
When the main battery of the phone is empty, I switch the booster on, and recharge the phone with the backpack. I have to look at the LED; when it's red, I have to switch it off. Everynight, everything get charged on the same single plug. One plug to charge both batts.
The advantages of my solution are:
- phone can last 18h with heavy work (wifi, bluetooth, GPS, and screen on, continuously)
- heavy case to protect my phone, plus tampered glass
- one plug to charge everything
- the micro-micro USB plug is ALWAYS in the phone. This means, the female plug of phone can not get dirty, or filled with dust. I never unplug it, so it does not age. I never plug a classic USB cable directly in the phone, so, no chance to break it. I have broken 3 or 4 times the back charger plug; if I am in hurry, I can exceptionally charge the phone directly; next day home, I can fix it.
This night, I was using my phone, and switched the backpack on. I could not plug my wall charger, because it's home made, has an issue, and makes the virtual keyboard erratic. I fell asleep with the phone in my hand, and the backpack went red ... for 4 hours. During 4 hours, it was trying to deliver 5V, and failed at so. Since my battery was delivering an unstable +5V, the phone was trying to charge, was staying on, but could not properly charge. In the end, all batteries got flat.
This morning, when I woke up, I plugged the stuff; only the back-batt started charging. Phone itself refused to charge; screen was black, and charging LED stayed off. So, I fell in what we call the "phone refuses to charge".
But, because of my set-up, I can *NOT* be in the dirty or broken plug case. Just impossible. And because of context, I just knew I had a flatt battery. This is technically called "deep discharged". And it contributes to aging of batt. Like overcharging, this heavily affects the total capacity.
I knew I could fix the issue by opening the phone, and putting a LiPo charger directly on the batt lines. I have loads of standalone chargers. I had a standalone wall charger for my previous HTC Sensation. But with the M8, we can not just open the case, and take the batt out. It's much more complicated. So, I have been Googling for more than half an hour. 95% results were about "remove dust of plug" and "bring it to the shop to change your plug". Some people also mention "a bug in the charger chipset".
I have plugged the phone on a classic USB charger, but via an USB meter monitor:
dx.com/p/382581 (dispite description, the device can accept up to 13V on input - this detail is critical when you use real QC2 chargers able to deliver 9 and 12V, like this one:
http://www.amazon.fr/Chargeur-secte...&qid=1451509059&sr=8-4&keywords=aukey+charger
http://www.amazon.fr/batterie-exter...&qid=1451509059&sr=8-5&keywords=aukey+charger
)
The USB meter was indicating 5V 0.03 A (or 9V 0.01 A, depending on source). So, the phone was using a bit of energy, but clearly not charging. I have left it 4h. Just in case, can not harm.
Then, I pressed together power, and volume up. The phone started to boot after 55 or 65s. About one minute; but clearly way longer than 42 or 47s found on forums. It started directly to some rescue mode, then, started to boot normally, without doing anything. Just released buttons during the first white screen. After booting, I have a normal phone. Did not need to perform any action. During boot, the phone had 2% batt, and was charging normaly. But, the charger LED remained off; I waited 5mn, untill I got 4%, unplugged the charger, replugged, and then got the orange LED.
Remember that your M8 can accept up to 9V on input. QC2 Chargers are really faster: with 9V 1.5A, you can charge your M8 from 0% to 100% in 95mn, even if you are intensively using it (gaming, wifi, GPS). Next gen phone will accept 12V. Even if manufacturers ignore that. HTC buys chips, and don't fully read specs. Aukey chargers are more powerfull and better reliable than official HTC ones.
Remember that many "slow charging" issues are in fact due to bad cable: charger is good, phone is good, but cable in between has high gauge copper, too thin wires, and produces voltage drop between plugs. HTC phones require 4.4V at the plug.
Remember that M8 and most modern phones (same for Samsung) are now MHL (wrongly called OTG): they are true USB hosts; you can plug any device on your phone; just buy an MHL (OTG) cable for 4 euros, and then a USB hub, and then any device: mouse, keyboard, USB monitor, ethernet dongle, SATA adapter, CF-uSD adapter ... and for 12 euros you have HDMI converters. Modern smartphones are real computers. Use them.
I wanted to share this in case anyone ever experiences the same problem. I had my Note 4 since it was released in October and didn't have any issues until roughly a week ago. All of a sudden, the phone would not fast charge. Whenever connected to the fast charging adapter, it would detect it and charge, but it would not give the fast charge notification and would charge extremely slowly (8 hours to get a full charge from near empty). In addition, my PCs would no longer be able to access it and the phone would not give the MTP option menu when connected. I tried multiple cables, outlets, fast chargers, and batteries in addition to toggling the fast charge setting, wiping the cache, and performing a factory reset - but nothing helped. I finally called verizon and they sent me a new note 4 and everything was working again.....
Three days passed and the same exact issue occurred again on the replacement phone. This makes me believe that the Samsung charger I have has somehow deteriorated and is now breaking the usb connectivity on the phone. I contacted samsung and am getting a replacement for the charger and will have to get ANOTHER replacement phone from verizon (after they finish processing my first replacement).
So if anyone has a similar issue, I would suggest getting a new charger in addition to the phone replacement so you don't have to go through the entire process again. I could be wrong that the charger caused this, but I can't think of anything else besides the recent lollipop upgrade - but everything was working for several days on lollipop for both phones.
If anyone has ideas on how to fix this, please let me know. I can't return the second phone until the first one is processed so no fast charging or PC connection until then. Thanks
Having exactly the same issues. Let me know if you work it out.
maliciousintent said:
Having exactly the same issues. Let me know if you work it out.
Click to expand...
Click to collapse
Same Issues and I have three fast chargers so it is not the charger it is the phone or the 5.0 update.
Mine was not really even charging unless I turned the phone off. I called Verizon and they are sending me a replacement phone overnight. It would not connect to the computer either. I hope this is not a result of fast charging, if so they are gonna get a lot of phone calls
I also have another fast charger which wasn't working... I was thinking that my main charger was breaking the phones USB connectivity and fast charging, but if others are having the same problem then I am wondering if it is something related to the lollipop update. I am replacing the main charger and should have another replacement note 4 come Friday. If it happens again, then I think it points to the lollipop update since both phones had this issues days after lollipop was installed.
I'll let you guys know the outcome
Had the same issue. Used a different wire. Solved the problem. Any Micro USB that can transfer data, can use fast charge. If it's a "power only" cable, or if the data pins/wires are messed up, no fast charge.
graydiggy said:
Had the same issue. Used a different wire. Solved the problem. Any Micro USB that can transfer data, can use fast charge. If it's a "power only" cable, or if the data pins/wires are messed up, no fast charge.
Click to expand...
Click to collapse
Well the problem was that all the cables were working and then stopped. When I got the replacement phone they worked and then a few days later the same thing happened again. So something was causing the connection to break completely. I am hoping that the cause was the charger which I am replacing.
Word of advice: if it stops charging normally In ANY way. THROW AWAY THE CHARGER. I made the same mistake and my Note 4 literally lit on fire melting the lower 1/2 inch of my phone and completely melting the charger. It was so hot by the time I was able to yank the cord out both the phone and charger were melted and destroyed and I ended up with three fingers with minor burns. I am lucky it did not happen when I was sleeping with my infant nearby. I now charge my phone only in the day and on a granite counter in case of fire again.
It stopped fast charging. Then I used the charger again and got a message saying "Transferring power to high powered device" then wham 2" flames
Verizon kept claiming it couldnt happen and thought I used a aftermarket charger until I brought the phone and charger to a corporate store and they prompytly replaced both the phone and charger under factory warranty.
I have three samsung original fast chargers and none of them worked plus the fact that the phone could not be connected to any computer I have makes me think it was the phone. I got the new phone today so I guess time will tell. I just can't see three chargers and cables going bad all at the same time. I also did not take the 5.0 update on the new phone.
my replacement phone stopped fast charging and computer will not recognize it now. I used a different cable that was plugged into the fast charge module from Samsung. I guess that is what caused it. They are sending another phone but for C sake if a cable is the reason this happens surely there should be a fix without replacing the phone time after time.
I finally received the new phone from Verizon and I replaced all the cables I was using to make sure this doesn't happen again. Hopefully the charger was the culprit and the problem is over and done with. Hope no one else encounters this as it really was a pain to deal with.
I got my third phone Monday and so far so good. I had a car charger from Verizon plugged into an extender that had 4 plugs in it. When I unplugged my GPS from it I noticed it was very hot. The Verizon Charger was also hot even though nothing was plugged into it. This may have been what caused my issue. It could have overheated. I replaced it with a different brand and tested to make sure it stayed cool when anything was plugged in and have used it all week without issues. The only other thing could have been the USB cable I used the evening before the second phone stopped fast charging so I do not use it either. So if you use a car charger extender check to see if it gets hot when anything is plugged in. BUT, it is scary knowing something like this can kill the USB on this phone.
I have an external Hard-drive that would constantly disconnect and reconnect with the slightest movement of the cord connected to the computer. It even caused my H/D to get corrupted twice requiring re-formatting. But all I had to do to fix it was to squeeze the big connector on the cord a little and tighten it up. Just a thought.
It's been a week since I received my third phone and everything is working perfectly. I can only assume the charger was breaking it and I'm glad the issue is behind me.
So for anyone experiencing this, I suggest contacting Samsung to replace the charger before going to your cell provider to replace the phone
I'm having the same exact problem. My 2nd replacement phone is now doing the same thing as the first one. I have too many scenarios now though and I'm confused as to which it is. I have two Adaptive chargers.. Batteries, phone, or chargers...
As soon as I replaced the charger, I didn't have this issue again. I suggest sending your chargers back to Samsung (or whatever other brand you have) because one of them is breaking the phones
Sent from my Nexus 6 using Tapatalk
I would place my bet on a bad cable. With the higher voltages that fast charge uses going through the danger of arching and sparking is increased especially if there's a poor connection would fry or weld melt metal inside the connector. This could damage the USB port in the phone and cause the phone's USB port to have a bad connection. This bad USB port in the phone could fry the other cables as well leaving you wondering why everything went bad all at once
My phone will fast charge on my two vehicle chargers (at 1.5 amps and 2.1 amps), but refuses to change any faster than 500 mA on two separate fast charger bricks. The same bricks work fine for fast charging other phones, so it's my phone, not the charging hardware. I'm using the same cable(s) for all instances, which leads me to believe that something is wrong with how the phone interprets the "smart charging" signal on the bricks, or that the phone is sending the wrong charging signal.
I can still connect to a computer just fine, so my issue may be different.
Does anyone else have the issue with bricks but not with chargers without "smart charging" capabilities?
I've had this problem on stock 5.1.1, Jasmine rom 6.0.1, and now CM13. I full wiped everything when reinstalling, so either it's hardware, or an issue propigated through many roms. I've tried a few different kernels too, just to see if that was the problem.
I'm changing the battery tomorrow to check that possibility. Maybe I'll bend the contact a slight bit and see what happens (phone catches on fire)...
Hi guys
I have the same problem as you ,so what I have to do to solve this issue without replace the phone,
I have rooted 5.1.1 stock rom, If i flash full stock rom 5.1.1 does this help or what?
zediiiii said:
My phone will fast charge on my two vehicle chargers (at 1.5 amps and 2.1 amps), but refuses to change any faster than 500 mA on two separate fast charger bricks. The same bricks work fine for fast charging other phones, so it's my phone, not the charging hardware. I'm using the same cable(s) for all instances, which leads me to believe that something is wrong with how the phone interprets the "smart charging" signal on the bricks, or that the phone is sending the wrong charging signal.
I can still connect to a computer just fine, so my issue may be different.
Does anyone else have the issue with bricks but not with chargers without "smart charging" capabilities?
I've had this problem on stock 5.1.1, Jasmine rom 6.0.1, and now CM13. I full wiped everything when reinstalling, so either it's hardware, or an issue propigated through many roms. I've tried a few different kernels too, just to see if that was the problem.
I'm changing the battery tomorrow to check that possibility. Maybe I'll bend the contact a slight bit and see what happens (phone catches on fire)...
Click to expand...
Click to collapse
Turns out one out of the three new cables I bought didn't work, and my OEM cable didn't work for fast charging. Swapping for a good cable fixed the issue.
My Samsung A70 doesn't want to charge at the moment. The last time the charge worked was the previous day. Sometimes it happens to me that my phone suddenly does not charge, in these cases I took it to show it to a phone repair in the city, but when the technician tried to get it to charge it worked, but when I tried it at home no. I also went to the technician again, this time he tried to load it and at first it didn't work, after other attempts he started to load and after trying mine it worked again. I don't think it's the charger that creates problems but the phone, since I tried to charge it with various chargers. What I was also told by the technician is that I have a fast battery charger that my phone can't stand since this charger should be for the Samsung S10, S20 etc... The model is EP-TA800 and searching on google I found that charges at 25W, and still looking at google it says my phone supports 25W. Now I don't understand where the problem is it doesn't want to load again so I try to wait a bit to see if it loads again later. I also noticed one thing, that when I turned it off and then put it on charge (it gave me no sign that it was charging) and then on again, I found that the battery had increased. Could it be that it loads without showing me? Or could it be that my current charger is harming the phone? If you have had similar experiences let me know if there is a solution
It's a common issue on those phones (and on other Samsung devices, I've experienced it too), and to be honest I'm not sure if a repair is even worth it. One common "fix" is to press on the back of the phone, above samsung logo. It usually works, but it's not ideal.
I had random charging issues as well. Had the port changed and still did it. Sat in the drawer for a year and i finally took it somewhere else. They said it was the ribbon that connects the charging port to the board. If that makes any sense. They had one from a junk phone and didnt even charge me for it. Works perfect.