Usually I would not release a firmware for a customized variant, but in this case I made an exception because the firmware felt so damn fast (feels like JM9 ^2).
It might just be because of the epic hangover I have, but anyway...
Few facts about this version:
BETA release (not official, obviously)
Version: 2.1 Eclair
PDA version I9000TDOJJ1
PDA Build time: 2010.10.05 18:37:01 KST
PDA Changelog: Unknown
MODEM version I9000XXJM4
MODEM Build time: 2010.08.31 10:26:45 KST
MODEM Changelog: Unknown
This firmware is made for Telstra "customized" (the firmware itself is not branded) GT-I9000T phone. The main hardware is identical with GT-I9000, so the firmware will work just fine with a normal GT-I9000 (atleast have not notice any problems yet). Of course we will use a modem FW made for Europe
However the CSC files made for GT-I9000 do not work with this firmware directly. To be able to use the CSC files with this firmware, a fix needs to be applied:
USE CSCs FROM THIS ARCHIVE ONLY. OTHER ONES LISTED BELOW ARE FOR REFERENCE ONLY, THEY DO NOT WORK WITH THIS FIRMWARE.
They are all in single package to save time: GT-I9000(T)_FIXED_CSC.7z
Download and make your pick.
Use as a normal update.zip via recovery.
Clear cache afterwards (via recovery also).
DO NOT USE ODIN3
Extract the .7z archive and put the update.zip file to the root of your internal sd card.
Flash your phone with CODE and MODEM file ONLY.
After the flash there will be no CSC (does not matter). Reboot to recovery mode and select apply sdcard:update.zip (execute by pressing home key).
After that the CSC will be working fine.
The modem firmware has been updated from I9000XXJM3 used in my previous releases to I9000XXJM4 (final). This version should have some actual changes too (besides fixed typos in operator names).
All CSC versions are I9000???JM1 and unbranded, but CSC´s for specific operators (Vodafone for example) are included.
UI / Swype languages supported by DOJJ1:
UI: Bulgarian, Czech, Danish, Deutsch DACH, Dutch, English (Australia, Ireland, New Zealand, South Africa, UK, US), Estonian, Finnish, French, Greek, Hungarian, Icelandic, Irish, Italian, Kazakh, Latvian, Lithuanian, Macedonian, Norwegian, Polish, Portuguese, Russian, Slovakian, Slovenian, Spanish, Swedish, Turkish, Ukrainian
Swype: English (Australia, Ireland, New Zealand, South Africa, UK, US), Deutsch DACH, Dutch, French, Italian, Polish, Portuguese, Spanish, Turkish,
Usually Odin3 images are provided in a single integrated .tar package which contain all of the necessary files. This way the CSC cannot be selected separately.
That is why I splitted the release in three different parts (CODE, MODEM, CSC).
Since Odin3 has flashfile checksum support I also added md5 hash tail to the .tar files. This way is more secure because Odin will not allow flashing corrupted images. Flashing takes a bit longer thou because the checksums are checked in the beginning of the update process.
You need to download two files.
GT-I9000(T)-I9000TDOJJ1_I9000XXJM4_CODE-MODEM.7z
CSC_I9000?????? (CSC corresponding your PCODE)
I know this is not nearly all of the excisting variants, but repacking the softwares is quite a slow process for certain reasons. I have access to pretty much any Samsung firmware, so if you find a variant missing you can send me pm. I can have a look.
Download links:
GT-I9000(T)-I9000TDOJJ1_I9000XXJM4_CODE-MODEM
CSC_I9000DBTJM1 - Generic Germany (Unbranded, PCODE DBT)
CSC_I9000OXAJM1 - Generic Europe Multi-CSC (Unbranded, PCODE(s) CPW, DBT, ITV, KOR, XEF, XEO, XEU)
CSC_I9000OXEJM1 - Baltic, Kazakhstan, Russia, Ukraine Multi-CSC (Unbranded, PCODE(s) SEB, SEK, SER, SKZ)
CSC_I9000OXXJM4 - Europe - Africa Multi-CSC (Unbranded, PCODE(s) ATO, AUT, CNX, COA, COS, CRO, CYO, CYV, EUR, HAT, IRD, KOR, MET, MOT, MOZ, MSR, MTL, O2C, O2I, ONE, ORO, SEB, SIM, SMO, SUN, TMZ, TOP, TPH, TRA, TSR, TWO, VDH, VDI, VIM, VIP, VVT, XEH, XEO, XEZ, XFA, XFC, XFE, XFM
CSC_I9000BMCJH2 - Bell Canada (Branded, PCODE BMC)
CSC_I9000HUIHUI - Tre H3G Italy (Branded, PCODE HUI)
CSC_I9000OLBJG4 - Asian Multi-CSC (Unbranded, PCODE(s) CCM, DGI, GLB, MIS, MM1, SIN, SMA, STH, THL, UMB, XEV, XME, XSE, XSO, XSP, XTC, XTE, XXV)
CSC_I9000OPSJG1 - Optus Australia (Unbranded, PCODE OPS)
CSC_I9000XEEJM1 - Generic Nordic (Unbranded, PCODE XEE)
CSC_I9000TMNJM1 - TMN Portugal (Branded, PCODE TMN)
CSC_I9000TMNJM1-CLEAN-v2 - TMN Portugal (Custom, PCODE TMN)
CSC_I9000XECJM1 - Generic Spain (Unbranded, PCODE XEC)
CSC_I9000PANJM1 - Telenor Hungary (Branded, PCODE PAN)
CSC_I9000PRTJM2 - Play Poland (Branded, PCODE PRT)
CSC_I9000SWCJM1 - Swisscom Switzerland (Branded, PCODE SWC)
CSC_I9000TENJM2 - Telenor Norway (Unbranded, PCODE TEN)
CSC_I9000TIMJM2 - TIM Italy (Branded, PCODE TIM)
CSC_I9000TMHJM2 - T-Mobile Hungary (Unbranded, PCODE TMH)
CSC_I9000GVD2JM3 - Vodafone Deutschland (Branded, PCODE VD2)
CSC_I9000XEFJM2 - Country Specific France (Unbranded, PCODE XEF)
CSC_I9000XENJM1 - Country Specific Netherlands (Unbranded, PCODE XEN)
How to check which CSC (major) version you should use:
Open dialer and type: *2767*4387264636#
The second line will read: PCode:GT-I9000HK?xxx.
Make the last three characters match with the CSC product code.
Extract the downloaded .rar archives to the same folder.
The archives are contain .tar.md5 files. Do not open them with Winrar for example. They are compressed Odin images which do not need unpacking.
So how to proceed:
Put your phone to download mode (hold down: volume down, home key, power)
DO NOT plug in your phone yet, Odin / driver does not like it at this stage.
Start Odin3
Tick "Re-Partition", check that "Auto Reboot" and "F. Reset Time" have been ticked.
Click "PIT" button and select s1_odin_20100512.pit file.
Plug in the phone and wait until Odin finds it.
Click "Start" button... <Firmware update start...> <Get PIT for mapping...> appear. The phone will turn off and the screen indicates "Reset". Wait until Odin indicates "Pass".
Plug out your phone, remove the battery, put it back in and put phone to download mode again.
Click "Reset" button in Odin and untick "Re-Partition" box.
DO NOT select PIT file again.
Click "PDA" button and select "CODE_I9000TDOJJ1.tar.md5" file.
Click "MODEM" button and select "MODEM_I9000XXJM4.tar.md5" file.
Click "CSC" button and select the desired version "CSC_I9000???JM?.tar.md5".
Plug in the phone and wait until Odin finds it.
Click "Start" button and wait until phone reboots with the new software version.
When using *Multi CSC* you need to:
Turn on USB debugging and plug in the phone.
Open command prompt and type:
Code:
adb shell
am start -a android.intent.action.MAIN -n com.android.Preconfig/com.android.Preconfig.Preconfig
Then select the desired CSC version from the list and press "Install" (this happens on phone screen!).
The phone will reboot once the change is done.
**Read this if you are downgrading from I9000XXJPC rom**
Requirements: Rooted phone, "Root Explorer" (or similar), .nv_data.bak and .nv_data.bak.md5 files (PRIOR the date of I9000XXJPC release).
Because I9000XXJPC rom rewrites certain thing in the permanent memory area of the phone, certain things CAN occur when you downgrade the phone to <I9000XXJPC firmware. It is possible that there will not be any problems at all, but if there is read below.
Possible problems (I had them all due trying different thing to solve it):
IMEI "corruption".
nv_data.bin checksum does not pass the check and the phone / baseband generates a new blank one. Baseband test IMEI (000xxxxxxxxxxxx) will be displayed.
No service.
There is no service even a functional SIM card is inserted.
You cannot receive or make calls, receive or send sms, etc (obviously).
Freeze / lock-down.
The phone will not react to anything besides pressing power key.
You cannot unlock the display to enter PIN code.
Wrong PIN code.
The phone will not accept any PIN code on any SIM (even the correct one ).
Phone displays "wrong PIN code" message even the try counter (three strikes you know) does not change.
Product code changed to KOR.
= Blocked Kies updates (without a registry "hack")
Here is how to fix any or all of them:
Downgrade to I9000TDOJJ1 firmware with Odin (as usual).
Remove SIM card from the phone (to be able to boot in first place) and start the phone.
Gain root access and install "Root Explorer" (or similar), ADB works too.
Open Root Explorer and go to the "EFS" folder in the root.
Check the date on .nv_data.bak and .nv_data.bak.md5 files.
If it is earlier than 08/26/2010 you´re clear, if it is later then you may stop reading.
Once the date has been checked, select files nv_data.bin and nv_data.bin.md5 simultaneously and delete (yes, delete) them. Reboot the phone.
Now your phone is in the same condition (atleast permanent memory wise) as it was prior I9000XXJPC update.
There is a safety feature I would call "a dead mans switch".
If the current nv_data files are deleted, the phone will make new nv_data files from the .bak (backup) files (if they excist). The new nv_data files will be signed automatically so they pass the checks (none of the errors listed above will occur). However if they do not excist, the phone will just write an empty / test file (= IMEI corrupted, no service, etc). Also if you just rename .bak files they will have wrong signatures and the same problems will occur.
There is no bootloaders included, so it is safe to flash for everyone.
Regards.
- Nottingham
Is browser doubletap zoom working properly?
vov! it's build date is 05.10... i just flashed jm9 but i'm going to try this too...
Very Fast? Does this translate into better benchmarks as well?
I suppose the GPS is fixed in this one, so How's the FM radio?still mono?
How much RAM? how much available?
Any new apps?
I'm interested in the benchmark to see if there is any improvement in the I/O...
Thanks
Duplicate post - sorry
JM9 ^2 ????
That certainly sounds like an exaggeration!
@Richthofen: Why are you perpetually drunk?
Heh.. Thanks for the firmware though! Will wait for a version for the I9000 itself with whatever changes this has!
Any weird "phone informations" change?
just installed this.
I'm getting frequent fcs specifically: com.google.process.gapps keeps popping up to apologise for crashing..
consequently i can't put my google credentials in
All Day On XDA said:
just installed this.
I'm getting frequent fcs specifically: com.google.process.gapps keeps popping up to apologise for crashing..
consequently i can't put my google credentials in
Click to expand...
Click to collapse
did you try fctory reset/wipe after flashing?
yes - am gonna try again now with a cache wipe too
- didnt work
are any of the csc links working?
where can i download these from?
Whoa!!!! Slow down buddy.....
Was about to flash JM9 tonight and here come another release.....
Keep the releases coming buddy.
Cheers....
When I flash CSC after all this, it reboots me to recovery and give some weird error with "get build prop".
Btw. root via update.zip not working, the same getprop error, flashing back to JM9.
BaalBehrit said:
When I flash CSC after all this, it reboots me to recovery and give some weird error with "get build prop".
Btw. root via update.zip not working, the same getprop error, flashing back to JM9.
Click to expand...
Click to collapse
Same error here, but still willing to test this firmware
Going to wipe everything and see if I can get past the boot splash animation where it is hanging on..
Thanks Richthofen, truly the BEST 2.1 rom. Blazing fast !
Here's update.zip for rooting thism firmware:
http://forum.xda-developers.com/showthread.php?p=8550966#post8550966
DocRambone said:
Thanks Richthofen, truly the BEST 2.1 rom. Blazing fast !
Click to expand...
Click to collapse
Could you please post some facts? is the I/O a lot better?
Can't get through csc installation...i installed update.zip,rebooted,shutdown,flashed csc,but i have cache\sec_csc (or something similar) error...and i get black screen using csc selection through adb (just the white box on top,no choices below),and using *#1234# i see modem verison only,other fields are blank.
Fact is,that everything is working fine so far (just configured gmail and entered market)...should i care or not?
JJ1? Does Samsung pull version numbers out of a hat? Seriously, what ever happened to just starting at version 1 and going up from there?
Related
Few facts about this version:
INTERNAL release (not official, obviously)
Version: 2.1 Eclair
PDA version I9000XWJM9
PDA Build time: 2010.09.06 15:53:48 KST
PDA Changelog: Unknown
MODEM version I9000XXJM4
MODEM Build time: 2010.08.31 10:26:45 KST
MODEM Changelog: Unknown
The modem firmware has been updated from I9000XXJM3 used in my previous releases to I9000XXJM4 (final). This version should have some actual changes too (besides fixed typos in operator names).
All CSC versions are I9000???JM1 and unbranded, but CSC´s for specific operators (Vodafone for example) are included.
UI / Swype languages supported by XWJM9:
UI: Czech, Danish, Deutsch DACH , Dutch, English, Estonian, Finnish, French, Greek, Hungarian, Icelandic, Irish, Italian, Kazakh, Latvian, Lithuanian, Norwegian, Polish, Portuguese, Russian, Slovakian, Spanish, Swedish, Turkish, Ukrainian
Swype: Croatian, Czech, Danish, Deutsch DACH ,Dutch, English, Finnish, French, Greek, Italian, Norwegian, Polish, Portuguese, Romanian, Russian, Spanish, Swedish
I have not modified the code in any way, although I have repacked the release to make CSC selection possible.
Usually Odin3 images are provided in a single integrated .tar package which contain all of the necessary files. This way the CSC cannot be selected separately.
That is why I splitted the release in three different parts (CODE, MODEM, CSC).
Since Odin3 has flashfile checksum support I also added md5 hash tail to the .tar files. This way is more secure because Odin will not allow flashing corrupted images. Flashing takes a bit longer thou because the checksums are checked in the beginning of the update process.
You need to download two files.
GT-I9000_I9000XWJM9_I9000XXJM4_CODE-MODEM.7z
CSC_I9000?????? (CSC of your selection)
I know this is not nearly all of the excisting variants, but repacking the softwares is quite a slow process for certain reasons. I have access to pretty much any Samsung firmware, so if you find a variant missing you can send me pm. I can have a look.
Download links:
GT-I9000_I9000XWJM9_I9000XXJM4_CODE-MODEM.7z
CSC_I9000DBTJM1 - Generic Germany (Unbranded, PCODE DBT)
CSC_I9000OXAJM1 - Generic Europe Multi-CSC (Unbranded, PCODE(s) CPW, DBT, ITV, KOR, XEF, XEO, XEU)
CSC_I9000OXEJM1 - Baltic, Kazakhstan, Russia, Ukraine Multi-CSC (Unbranded, PCODE(s) SEB, SEK, SER, SKZ)
CSC_I9000OXXJM4 - Europe - Africa Multi-CSC (Unbranded, PCODE(s) ATO, AUT, CNX, COA, COS, CRO, CYO, CYV, EUR, HAT, IRD, KOR, MET, MOT, MOZ, MSR, MTL, O2C, O2I, ONE, ORO, SEB, SIM, SMO, SUN, TMZ, TOP, TPH, TRA, TSR, TWO, VDH, VDI, VIM, VIP, VVT, XEH, XEO, XEZ, XFA, XFC, XFE, XFM
CSC_I9000BMCJH2 - Bell Canada (Branded, PCODE BMC)
CSC_I9000HUIHUI - Tre H3G Italy (Branded, PCODE HUI)
CSC_I9000OLBJG4 - Asian Multi-CSC (Unbranded, PCODE(s) CCM, DGI, GLB, MIS, MM1, SIN, SMA, STH, THL, UMB, XEV, XME, XSE, XSO, XSP, XTC, XTE, XXV)
CSC_I9000OPSJG1 - Optus Australia (Unbranded, PCODE OPS)
CSC_I9000XEEJM1 - Generic Nordic (Unbranded, PCODE XEE)
CSC_I9000TMNJM1 - TMN Portugal (Branded, PCODE TMN)
CSC_I9000TMNJM1-CLEAN-v2 - TMN Portugal (Custom, PCODE TMN)
CSC_I9000XECJM1 - Generic Spain (Unbranded, PCODE XEC)
CSC_I9000PANJM1 - Telenor Hungary (Branded, PCODE PAN)
CSC_I9000PRTJM2 - Play Poland (Branded, PCODE PRT)
CSC_I9000SWCJM1 - Swisscom Switzerland (Branded, PCODE SWC)
CSC_I9000TENJM2 - Telenor Norway (Unbranded, PCODE TEN)
CSC_I9000TIMJM2 - TIM Italy (Branded, PCODE TIM)
CSC_I9000TMHJM2 - T-Mobile Hungary (Unbranded, PCODE TMH)
CSC_I9000GVD2JM3 - Vodafone Deutschland (Branded, PCODE VD2)
CSC_I9000XEFJM2 - Country Specific France (Unbranded, PCODE XEF)
CSC_I9000XENJM1 - Country Specific Netherlands (Unbranded, PCODE XEN)
How to check which CSC (major) version you should use:
Open dialer and type: *2767*4387264636#
The second line will read: PCode:GT-I9000HK?xxx.
Make the last three characters match with the CSC product code.
Extract the downloaded .rar archives to the same folder.
The archives are contain .tar.md5 files. Do not open them with Winrar for example. They are compressed Odin images which do not need unpacking.
So how to proceed:
Put your phone to download mode (hold down: volume down, home key, power)
DO NOT plug in your phone yet, Odin / driver does not like it at this stage.
Start Odin3
Tick "Re-Partition", check that "Auto Reboot" and "F. Reset Time" have been ticked.
Click "PIT" button and select s1_odin_20100512.pit file.
Plug in the phone and wait until Odin finds it.
Click "Start" button... <Firmware update start...> <Get PIT for mapping...> appear. The phone will turn off and the screen indicates "Reset". Wait until Odin indicates "Pass".
Plug out your phone, remove the battery, put it back in and put phone to download mode again.
Click "Reset" button in Odin and untick "Re-Partition" box.
DO NOT select PIT file again.
Click "PDA" button and select "CODE_I9000XWJM9.tar.md5" file.
Click "MODEM" button and select "MODEM_I9000XXJM4.tar.md5" file.
Click "CSC" button and select the desired version "CSC_I9000???JM?.tar.md5".
Plug in the phone and wait until Odin finds it.
Click "Start" button and wait until phone reboots with the new software version.
When using *Multi CSC* you need to:
Turn on USB debugging and plug in the phone.
Open command prompt and type:
Code:
adb shell
am start -a android.intent.action.MAIN -n com.android.Preconfig/com.android.Preconfig.Preconfig
Then select the desired CSC version from the list and press "Install" (this happens on phone screen!).
The phone will reboot once the change is done.
**Read this if you are downgrading from I9000XXJPC rom**
Requirements: Rooted phone, "Root Explorer" (or similar), .nv_data.bak and .nv_data.bak.md5 files (PRIOR the date of I9000XXJPC release).
Because I9000XXJPC rom rewrites certain thing in the permanent memory area of the phone, certain things CAN occur when you downgrade the phone to <I9000XXJPC firmware. It is possible that there will not be any problems at all, but if there is read below.
Possible problems (I had them all due trying different thing to solve it):
IMEI "corruption".
nv_data.bin checksum does not pass the check and the phone / baseband generates a new blank one. Baseband test IMEI (000xxxxxxxxxxxx) will be displayed.
No service.
There is no service even a functional SIM card is inserted.
You cannot receive or make calls, receive or send sms, etc (obviously).
Freeze / lock-down.
The phone will not react to anything besides pressing power key.
You cannot unlock the display to enter PIN code.
Wrong PIN code.
The phone will not accept any PIN code on any SIM (even the correct one ).
Phone displays "wrong PIN code" message even the try counter (three strikes you know) does not change.
Product code changed to KOR.
= Blocked Kies updates (without a registry "hack")
Here is how to fix any or all of them:
Downgrade to I9000XWJM9 firmware with Odin (as usual).
Remove SIM card from the phone (to be able to boot in first place) and start the phone.
Gain root access and install "Root Explorer" (or similar), ADB works too.
Open Root Explorer and go to the "EFS" folder in the root.
Check the date on .nv_data.bak and .nv_data.bak.md5 files.
If it is earlier than 08/26/2010 you´re clear, if it is later then you may stop reading.
Once the date has been checked, select files nv_data.bin and nv_data.bin.md5 simultaneously and delete (yes, delete) them. Reboot the phone.
Now your phone is in the same condition (atleast permanent memory wise) as it was prior I9000XXJPC update.
There is a safety feature I would call "a dead mans switch".
If the current nv_data files are deleted, the phone will make new nv_data files from the .bak (backup) files (if they excist). The new nv_data files will be signed automatically so they pass the checks (none of the errors listed above will occur). However if they do not excist, the phone will just write an empty / test file (= IMEI corrupted, no service, etc). Also if you just rename .bak files they will have wrong signatures and the same problems will occur.
There is no bootloaders included, so it is safe to flash for everyone.
Regards.
- Nottingham
AWESOME!
We missed you! Now waiting for custom roms based on this firmware
Thank you so much, Richthofen! Keep up your great work!
welcome back
Here we go again Thanks!
Thanks
Keep the good work going
For the netherlands you can use the "remake" I9000XENJM1 csc file.
You can find the thread here
http://forum.xda-developers.com/showthread.php?t=799077
Or the direct download link
http://www.mijnbestand.nl/Bestand-PFQY6O7XBRYM.tar
If I'm already running JM8, can I just flash the PDA in Odin?
If I can, will I lose all my data?
thanks Richthofen.
Thx for informing us
Anybody flashed this ?
wow, here we go again !!! lol... another eclair leak
Changelog ? someone have tried this?
thank you .. but how come no 2.2 leak from you??
If this has the slightest improvement over JM8 it will be awesome!
Richthofen
Click to expand...
Click to collapse
OXE *Multi CSC* (for Baltic, Kazakhstan, Russia, Ukraine)
Do You have more recent version than CSC_I9000OXEJM1.rar ???
Thanks in advance!
Thanks for this. Keep up the good work.
lownoise said:
Keep the good work going
For the netherlands you can use the "remake" I9000XENJM1 csc file.
You can find the thread here
http://forum.xda-developers.com/showthread.php?t=799077
Or the direct download link
http://www.mijnbestand.nl/Bestand-PFQY6O7XBRYM.tar
Click to expand...
Click to collapse
Thanks, just what I needed.
I have a French Galaxy S
Rooted, unlocked and now using in Malaysia.
Which CSC should I use?
Will I need to root / unlock again after the firmware upgrade?
Thanks as always!
Probably will download a bit later, when custom rom is ready (which will probably be soon).
Your the best =)
Awesome, can't wait to try even though is not 2.2. Thanks!
Thanks a mill!
Wonder if it's worthwhile updating to this from JM8... Build date differs about a week. Guess I'll just wait for some remarks and responses
got it now, feels kinda more smooth than jm8, maybe just cause of reboot
do you guys think i can run voodoo over jm9 too?
Few facts about this version:
OFFICIAL release
Version: 2.2 Froyo
PDA version I9000ZWJP6
PDA Build time: 2010.10.27 14:42:27 KST
PDA Changelog: Unknown
MODEM version I9000ZWJP6
MODEM Build time: 2010.10.26 17:11:11 KST
MODEM Platform: Infineon X-Gold 616 (Not for Asian variants!)
The rom is intended for Taiwanese markets, but it works with international GT-I9000 phones as the hardware is identical. Do not try to update a phone sold in mainland China (GT-I9008, GT-I9088, etc) as the baseband will probably be bricked (Philips Modem).
The rom can be used with any of the CSCs listed below.
Swype languages supported by ZWJP6:
Swype: English, Chinese, Korean
I have not modified the code in any way, although I have repacked the release to make CSC selection possible.
Usually Odin3 images are provided in a single integrated .tar package which contain all of the necessary files. This way the CSC cannot be selected separately.
That is why I splitted the release in three different parts (CODE, MODEM, CSC).
Since Odin3 has flashfile checksum support I also added md5 hash tail to the .tar files. This way is more secure because Odin will not allow flashing corrupted images. Flashing takes a bit longer thou because the checksums are checked in the beginning of the update process.
You need to download two files.
GT-I9000_I9000ZWJP6_I9000ZWJP6_CODE-MODEM_OSP-MID.exe
CSC_I9000?????? (CSC of your selection)
Note: The files are 7zip Self Extractors, double click to extract.
Download links:
GT-I9000_I9000ZWJP6_I9000ZWJP6_CODE-MODEM_OSP-MID
CSC_I9000NEEJP4 (Single CSC, Pcode "NEE")
CSC_I9000XEEJP4 (Single CSC, Pcode "XEE")
CSC_I9000XENJP2 (Single CSC, Pcode "XEN")
CSC_I9000OXAJPO (Multi CSC, Pcodes "CPW", "DBT", "KOR", "XEO", "XEU")
CSC_I9000OZSJPD (Multi CSC, Pcodes "BRI", "TGY")
CSC_I9000DBTJP3 (Single CSC, Pcode "DBT")
CSC_I9000ERAJP2 (Single CSC, Pcode "ERA")
CSC_I9000XEFJP3 (Single CSC, Pcode "XEF")
CSC_I9000TMNJP3 (Single CSC, Pcode "TMN")
CSC_I9000ITVJP3 (Single CSC, Pcode "ITV")
CSC_I9000GVODJP7 (Single CSC, Pcode "VOD")
CSC_I9000SERJP1 (Single CSC, Pcode "SER")
CSC_I9000OXXJP7 (Multi CSC, Pcodes "ATO", "AUT", "BSE", "CNX", "COA", "COS", "CRO", "CYO", "CYV", "EUR", "HAT", "IRD", "MET", "MOT", "MOZ", "MSR", "MTL", "O2C", "O2I", "ONE", "ORO", "ORS", "SEB", "SIM", "SMO", "SUN", "TMZ", "TOP", "TPH", "TRA", "TSR", "TWO", "VDH", "VDI", "VIM", "VIP", "VVT", "XEH", "XEO", "XEZ", "XFA", "XFC", "XFE", "XFM")
CSC_I9000O2UJP3 (Single CSC, Pcode "O2U")
CSC_I9000OJPJPF (Multi CSC, Pcodes "EGY", "JED", "KSA", "MAT", "MED", "MID", "MMC", "MWD", "PAK", "THR", "WAN", "XSG", "XSS")
CSC_I9000TWMJP6 (Single CSC, Pcode "TWM")
CSC_I9000OXFJP6 (Multi CSC, Pcodes "BHT", "CNX", "COA", "ERO", "HAT", "KOR", "MSR", "MTL", "ORO", "SIM", "SMO", "TMT", "TOP", "TRA", "TSR", "TWO", "VIM", "VIP", "VVT")
How to check which CSC (major) version you should use:
Open dialer and type: *2767*4387264636#
The second line will read: PCode:GT-I9000HK?xxx.
Make the last three characters match with the CSC product code.
So how to proceed:
Put your phone to download mode (hold down: volume down, home key, power)
DO NOT plug in your phone yet, Odin / driver does not like it at this stage.
Start Odin3
Tick "Re-Partition", check that "Auto Reboot" and "F. Reset Time" have been ticked.
Click "PIT" button and select s1_odin_20100512.pit file.
Plug in the phone and wait until Odin finds it.
Click "Start" button... <Firmware update start...> <Get PIT for mapping...> appear. The phone will turn off and the screen indicates "Reset". Wait until Odin indicates "Pass".
Plug out your phone, remove the battery, put it back in and put phone to download mode again.
Click "Reset" button in Odin and untick "Re-Partition" box.
DO NOT select PIT file again.
Click "PDA" button and select "CODE_I9000ZWJP6.tar.md5" file.
Click "MODEM" button and select "MODEM_I9000ZWJP6.tar.md5" file.
Click "CSC" button and select the desired version "CSC_I9000???JP?.tar.md5".
Plug in the phone and wait until Odin finds it.
Click "Start" button and wait until phone reboots with the new software version.
When using a *Multi CSC* you need to select the CSC matching your product code (see above how to check). Open the dialer and type *#272*IMEI# (IMEI being... your 15 digit IMEI code )
Then select the desired CSC version from the list and press "Install".
The phone will reboot once the change is done.[/B]
The rom is a middle package as usual, so no bootloader included.
Regards.
- Nottingham
Thanks, i will test.
Your ADJP5 run nicely
DocRambone said:
Thanks, i will test.
Your ADJP5 run nicely
Click to expand...
Click to collapse
You might want to wait for 10 more minutes.
Richthofen said:
You might want to wait for 10 more minutes.
Click to expand...
Click to collapse
Ohooo, new rom on the way?. U a killer!
DocRambone said:
Ohooo, new rom on the way?. U a killer!
Click to expand...
Click to collapse
Lol i just flashed this one and it has some new stuff.Thank you
Few facts about this version:
OFFICIAL release
Version: 2.2 Froyo
PDA version I9000XFJP7
PDA Build time: 2010.10.27 09:38:44 KST
PDA Changelog: Unknown
MODEM version I9000XXJPP
MODEM Build time: 2010.10.26 16:19:10 KST
MODEM Platform: Infineon X-Gold 616
This rom is very similar if not identical with previously released official I9000XWJPA and I9000XXJPO roms. The main difference is the language support.
The rom can be used with any of the CSCs listed below.
Swype languages supported by XFJP7:
Swype: Bulgarian, Croatian, Danish, Dutch, English, Finnish, French, German, Korean, Norwegian, Romanian, Serbian, Slovenian, Swedish
I have not modified the code in any way, although I have repacked the release to make CSC selection possible.
Usually Odin3 images are provided in a single integrated .tar package which contain all of the necessary files. This way the CSC cannot be selected separately.
That is why I splitted the release in three different parts (CODE, MODEM, CSC).
Since Odin3 has flashfile checksum support I also added md5 hash tail to the .tar files. This way is more secure because Odin will not allow flashing corrupted images. Flashing takes a bit longer thou because the checksums are checked in the beginning of the update process.
You need to download two files.
GT-I9000_I9000XFJP7_I9000XXJPP_CODE-MODEM_OSP-MID.exe
CSC_I9000?????? (CSC of your selection)
Note: The files are 7zip Self Extractors, double click to extract.
Download links:
GT-I9000_I9000XFJP7_I9000XXJPP_CODE-MODEM_OSP-MID
CSC_I9000NEEJP4 (Single CSC, Pcode "NEE")
CSC_I9000XEEJP4 (Single CSC, Pcode "XEE")
CSC_I9000XENJP2 (Single CSC, Pcode "XEN")
CSC_I9000OXAJPO (Multi CSC, Pcodes "CPW", "DBT", "KOR", "XEO", "XEU")
CSC_I9000OZSJPD (Multi CSC, Pcodes "BRI", "TGY")
CSC_I9000DBTJP3 (Single CSC, Pcode "DBT")
CSC_I9000ERAJP2 (Single CSC, Pcode "ERA")
CSC_I9000XEFJP3 (Single CSC, Pcode "XEF")
CSC_I9000TMNJP3 (Single CSC, Pcode "TMN")
CSC_I9000ITVJP3 (Single CSC, Pcode "ITV")
CSC_I9000GVODJP7 (Single CSC, Pcode "VOD")
CSC_I9000SERJP1 (Single CSC, Pcode "SER")
CSC_I9000OXXJP7 (Multi CSC, Pcodes "ATO", "AUT", "BSE", "CNX", "COA", "COS", "CRO", "CYO", "CYV", "EUR", "HAT", "IRD", "MET", "MOT", "MOZ", "MSR", "MTL", "O2C", "O2I", "ONE", "ORO", "ORS", "SEB", "SIM", "SMO", "SUN", "TMZ", "TOP", "TPH", "TRA", "TSR", "TWO", "VDH", "VDI", "VIM", "VIP", "VVT", "XEH", "XEO", "XEZ", "XFA", "XFC", "XFE", "XFM")
CSC_I9000O2UJP3 (Single CSC, Pcode "O2U")
CSC_I9000OJPJPF (Multi CSC, Pcodes "EGY", "JED", "KSA", "MAT", "MED", "MID", "MMC", "MWD", "PAK", "THR", "WAN", "XSG", "XSS")
CSC_I9000TWMJP6 (Single CSC, Pcode "TWM")
CSC_I9000OXFJP6 (Multi CSC, Pcodes "BHT", "CNX", "COA", "ERO", "HAT", "KOR", "MSR", "MTL", "ORO", "SIM", "SMO", "TMT", "TOP", "TRA", "TSR", "TWO", "VIM", "VIP", "VVT")
How to check which CSC (major) version you should use:
Open dialer and type: *2767*4387264636#
The second line will read: PCode:GT-I9000HK?xxx.
Make the last three characters match with the CSC product code.
So how to proceed:
Put your phone to download mode (hold down: volume down, home key, power)
DO NOT plug in your phone yet, Odin / driver does not like it at this stage.
Start Odin3
Tick "Re-Partition", check that "Auto Reboot" and "F. Reset Time" have been ticked.
Click "PIT" button and select s1_odin_20100512.pit file.
Plug in the phone and wait until Odin finds it.
Click "Start" button... <Firmware update start...> <Get PIT for mapping...> appear. The phone will turn off and the screen indicates "Reset". Wait until Odin indicates "Pass".
Plug out your phone, remove the battery, put it back in and put phone to download mode again.
Click "Reset" button in Odin and untick "Re-Partition" box.
DO NOT select PIT file again.
Click "PDA" button and select "CODE_I9000XFJP7.tar.md5" file.
Click "MODEM" button and select "MODEM_I9000XXJPP.tar.md5" file.
Click "CSC" button and select the desired version "CSC_I9000???JP?.tar.md5".
Plug in the phone and wait until Odin finds it.
Click "Start" button and wait until phone reboots with the new software version.
When using a *Multi CSC* you need to select the CSC matching your product code (see above how to check). Open the dialer and type *#272*IMEI# (IMEI being... your 15 digit IMEI code )
Then select the desired CSC version from the list and press "Install".
The phone will reboot once the change is done.[/B]
The rom is a middle package as usual, so no bootloader included.
Regards.
- Nottingham
thanks!
10 chars.
Thanks dude
thx man !!!!
Hi Richthofen, can you provide CSC for Swisscom (SWC) ?
Thanks.
could you please also provide CSC for india ... INU.
Thank you Richthofen. Now I`m covered by warranty as it is the official ROM for my country
Thanks !!!
Hi!
I cannot seem to open the CSC_I9000XEEJP4 (Single CSC, Pcode "XEE")-file. 7z gives me an error about "unsupported compression method for CSC_I9000XEEJP4.tar"
Would appreciate it very much if a CSC for Globe Philippines could be uploaded.
Thanks!
razze76 said:
Hi!
I cannot seem to open the CSC_I9000XEEJP4 (Single CSC, Pcode "XEE")-file. 7z gives me an error about "unsupported compression method for CSC_I9000XEEJP4.tar"
Click to expand...
Click to collapse
try the latest 7z beta
Swype
No Portuguese Swype, no joy.
But thanks for firmware Richthofen.
Thanks, that did the trick.
I still get an error saying "there is no correct record at the end of archive", but at least I can access the file inside.
Is it possible to flash just the cache.rfs over an existing setup (including custom kernel with lagfix) to update the CSC, or will I just get myself into trouble this way.
And if so, is there an easy way to update to the correct CSC?
Fast download link:
All CSC and GT-I9000_I9000XFJP7_I9000XXJPP_CODE-MODEM_OSP-MID.rar.
I selected CSC_I9000OXXJP7 (EUR) for Greek language, but in the settings>locale it hasn't such an option for Greek!
What could be wrong???
giokou said:
I selected CSC_I9000OXXJP7 (EUR) for Greek language, but in the settings>locale it hasn't such an option for Greek!
What could be wrong???
Click to expand...
Click to collapse
CSC file is not for language in firmware, it is for APN network settings...
Regards
hello all,
which CSC file including Turkish language. i tried CSC_I9000OXXJP7 multi csc file but not included Turkish language. please help.
I was say: CSC file is NOT FOR LANGUAGE, it is for NETWORK APN SETTINGS.
Regards
Richthofen please tell people about CSC file.
And interest me, can I flash CSC CSC_I9000OXXJP7 , although i have GT-I9000HKDDBT Product Code (unbranded and unlocked) than in nature need have CSC_I9000DBTJP3
Regards
@Richthofen
wanted please ask
if you can do
CSC Canada BMC
New I9000UGJK3 Froyo
Greetings
And thank you very much
Download link: https://rapidshare.com/files/1630463345/S8530XPKG5_BIN.7z
Bada 2.0 beta firmware with socialhub premium activated for all regions available on the firmware.
This is Low debug mode no need modified.
After installing the rom, from the keyboard made this code:
*#5239870*# then select PreConfig then *#27236*# then press and select the code from your region.
XEF = FRANCE
SKT = KOREA
XEO = POLAND
XEU = UNITED KINGDOM
DBT = GERMANY
ITV = ITALY
Update : rename Rsrc2_S8530(Low).src2 > Rsrc2_S8530(Low).rc2
Not working missing FOTA file
Upload error Update : rename Rsrc2_S8530(Low).src2 > Rsrc2_S8530(Low).rc2
No need FOTA !! Sorry for error name file !!!
Ok thank you now working excellent
SM-A505U Android 9.0 Pie Firmware download: here
ro.product.manufacturer=samsung
ro.product.model=SM-A505U
ro.build.product=a50
Country: USA
Multi CSC : OYN
Xfinity Mobile (Comcast) SM-A505UZKNCCT
Firmware Update Info:
ro.build.PDA=A505USQU3ASL6
AP_A505USQU3ASL6_CL17605006_QB28207756_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505USQU3ASL6_CL17605006_QB28207756_REV00_user_low_ship.tar.md5
CP_A505USQU3ASL6_CP14753468_CL17605006_QB28207756_REV00_user_low_ship.tar.md5
CSC_OMC_OYN_A505UOYN3ASL6_CL17605006_QB28207756_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OYN_A505UOYN3ASL6_CL17605006_QB28207756_REV00_user_low_ship.tar.md5
USERDATA_CCT_A505USQU3ASL6_CL17605006_QB28207756_REV00_user_low_ship.tar.md5
ro.build.PDA=A505USQS3ASL4
AP_A505USQS3ASL4_CL16561534_QB27874851_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505USQS3ASL4_CL16561534_QB27874851_REV00_user_low_ship.tar.md5
CP_A505USQS3ASL4_CP14622435_CL16561534_QB27874851_REV00_user_low_ship.tar.md5
CSC_OMC_OYN_A505UOYN3ASL4_CL16561534_QB27874851_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OYN_A505UOYN3ASL4_CL16561534_QB27874851_REV00_user_low_ship.tar.md5
USERDATA_CCT_A505USQS3ASL4_CL16561534_QB27874851_REV00_user_low_ship.tar.md5
ro.build.PDA=A505USQS3ASK1
AP_A505USQS3ASK1_CL16561534_QB27058434_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505USQS3ASK1_CL16561534_QB27058434_REV00_user_low_ship.tar.md5
CP_A505USQS3ASK1_CP14273875_CL16561534_QB27058434_REV00_user_low_ship.tar.md5
CSC_OMC_OYN_A505UOYN3ASK1_CL16561534_QB27058434_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OYN_A505UOYN3ASK1_CL16561534_QB27058434_REV00_user_low_ship.tar.md5
USERDATA_CCT_A505USQS3ASK1_CL16561534_QB27058434_REV00_user_low_ship.tar.md5
ro.build.PDA=A505USQS2ASI5
AP_A505USQS2ASI5_CL16561534_QB26117931_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505USQS2ASI5_CL16561534_QB26117931_REV00_user_low_ship.tar.md5
CP_A505USQS2ASI5_CP13892942_CL16561534_QB26117931_REV00_user_low_ship.tar.md5
CSC_OMC_OYN_A505UOYN2ASI5_CL16561534_QB26117931_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OYN_A505UOYN2ASI5_CL16561534_QB26117931_REV00_user_low_ship.tar.md5
USERDATA_CCT_A505USQS2ASI5_CL16561534_QB26117931_REV00_user_low_ship.tar.md5
Sprint SM-A505UZKNSPR
Firmware Update Info:
ro.build.PDA=A505USQU3ASL5
AP_A505USQU3ASL5_CL17605006_QB28117037_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505USQU3ASL5_CL17605006_QB28117037_REV00_user_low_ship.tar.md5
CP_A505USQU3ASL5_CP14719995_CL17605006_QB28117037_REV00_user_low_ship.tar.md5
CSC_OMC_OYN_A505UOYN3ASL5_CL17605006_QB28117037_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OYN_A505UOYN3ASL5_CL17605006_QB28117037_REV00_user_low_ship.tar.md5
USERDATA_SPR_A505USQU3ASL5_CL17605006_QB28117037_REV00_user_low_ship.tar.md5
ro.build.PDA=A505USQU3ASL2
AP_A505USQU3ASL2_CL17353924_QB27718365_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505USQU3ASL2_CL17353924_QB27718365_REV00_user_low_ship.tar.md5
CP_A505USQU3ASL2_CP14552238_CL17353924_QB27718365_REV00_user_low_ship.tar.md5
CSC_OMC_OYN_A505UOYN3ASL2_CL17353924_QB27718365_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OYN_A505UOYN3ASL2_CL17353924_QB27718365_REV00_user_low_ship.tar.md5
USERDATA_SPR_A505USQU3ASL2_CL17353924_QB27718365_REV00_user_low_ship.tar.md5
ro.build.PDA=A505USQS3ASK2
AP_A505USQS3ASK2_CL16561534_QB27058453_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505USQS3ASK2_CL16561534_QB27058453_REV00_user_low_ship.tar.md5
CP_A505USQS3ASK2_CP14266322_CL16561534_QB27058453_REV00_user_low_ship.tar.md5
CSC_OMC_OYN_A505UOYN3ASK2_CL16561534_QB27058453_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OYN_A505UOYN3ASK2_CL16561534_QB27058453_REV00_user_low_ship.tar.md5
USERDATA_SPR_A505USQS3ASK2_CL16561534_QB27058453_REV00_user_low_ship.tar.md5
ro.build.PDA=A505USQU2ASI6
USERDATA_SPR_A505USQU2ASI6_CL16561534_QB26268733_REV00_user_low_ship.tar.md5
CP_A505USQU2ASI6_CP13960305_CL16561534_QB26268733_REV00_user_low_ship.tar.md5
CSC_OMC_OYN_A505UOYN2ASI6_CL16561534_QB26268733_REV00_user_low_ship.tar.md5
AP_A505USQU2ASI6_CL16561534_QB26268733_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505USQU2ASI6_CL16561534_QB26268733_REV00_user_low_ship.tar.md5
ro.build.PDA=A505USQU1ASF2
AP_A505USQU1ASF2_CL16022886_QB24114167_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505USQU1ASF2_CL16022886_QB24114167_REV00_user_low_ship.tar.md5
CP_A505USQU1ASF2_CP12912450_CL16022886_QB24114167_REV00_user_low_ship.tar.md5
CSC_OMC_OYN_A505UOYN1ASF2_CL16022886_QB24114167_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OYN_A505UOYN1ASF2_CL16022886_QB24114167_REV00_user_low_ship.tar.md5
USERDATA_SPR_A505USQU1ASF2_CL16022886_QB24114167_REV00_user_low_ship.tar.md5
US Cellular SM-A505UZKNUSC
Firmware Update Info:
ro.build.PDA=A505USQU3ASL5
AP_A505USQU3ASL5_CL17605006_QB28117037_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505USQU3ASL5_CL17605006_QB28117037_REV00_user_low_ship.tar.md5
CP_A505USQU3ASL5_CP14719995_CL17605006_QB28117037_REV00_user_low_ship.tar.md5
CSC_OMC_OYN_A505UOYN3ASL5_CL17605006_QB28117037_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OYN_A505UOYN3ASL5_CL17605006_QB28117037_REV00_user_low_ship.tar.md5
USERDATA_USC_A505USQU3ASL5_CL17605006_QB28117037_REV00_user_low_ship.tar.md5
ro.build.PDA=A505USQU2ASJ2
AP_A505USQU2ASJ2_CL16561534_QB26597627_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505USQU2ASJ2_CL16561534_QB26597627_REV00_user_low_ship.tar.md5
CP_A505USQU2ASJ2_CP14094925_CL16561534_QB26597627_REV00_user_low_ship.tar.md5
CSC_OMC_OYN_A505UOYN2ASJ2_CL16561534_QB26597627_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OYN_A505UOYN2ASJ2_CL16561534_QB26597627_REV00_user_low_ship.tar.md5
USERDATA_USC_A505USQU2ASJ2_CL16561534_QB26597627_REV00_user_low_ship.tar.md5
ro.build.PDA=A505USQS2ASI3
AP_A505USQS2ASI3_CL16269638_QB25941445_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505USQS2ASI3_CL16269638_QB25941445_REV00_user_low_ship.tar.md5
CP_A505USQS2ASI3_CP13808054_CL16269638_QB25941445_REV00_user_low_ship.tar.md5
CSC_OMC_OYN_A505UOYN2ASI3_CL16269638_QB25941445_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OYN_A505UOYN2ASI3_CL16269638_QB25941445_REV00_user_low_ship.tar.md5
USERDATA_USC_A505USQS2ASI3_CL16269638_QB25941445_REV00_user_low_ship.tar.md5
Verizon Wireless SM-A505UZKNVZW
Firmware Update Info:
ro.build.PDA=A505USQU3ASL6
AP_A505USQU3ASL6_CL17605006_QB28207756_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505USQU3ASL6_CL17605006_QB28207756_REV00_user_low_ship.tar.md5
CP_A505USQU3ASL6_CP14753468_CL17605006_QB28207756_REV00_user_low_ship.tar.md5
CSC_OMC_OYN_A505UOYN3ASL6_CL17605006_QB28207756_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OYN_A505UOYN3ASL6_CL17605006_QB28207756_REV00_user_low_ship.tar.md5
USERDATA_VZW_A505USQU3ASL6_CL17605006_QB28207756_REV00_user_low_ship.tar.md5
ro.build.PDA=A505USQS3ASL4
AP_A505USQS3ASL4_CL16561534_QB27874851_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505USQS3ASL4_CL16561534_QB27874851_REV00_user_low_ship.tar.md5
CP_A505USQS3ASL4_CP14622435_CL16561534_QB27874851_REV00_user_low_ship.tar.md5
CSC_OMC_OYN_A505UOYN3ASL4_CL16561534_QB27874851_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OYN_A505UOYN3ASL4_CL16561534_QB27874851_REV00_user_low_ship.tar.md5
USERDATA_VZW_A505USQS3ASL4_CL16561534_QB27874851_REV00_user_low_ship.tar.md5
ro.build.PDA=A505USQU3ASL6
AP_A505USQU3ASL6_CL17605006_QB28207756_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505USQU3ASL6_CL17605006_QB28207756_REV00_user_low_ship.tar.md5
CP_A505USQU3ASL6_CP14753468_CL17605006_QB28207756_REV00_user_low_ship.tar.md5
CSC_OMC_OYN_A505UOYN3ASL6_CL17605006_QB28207756_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OYN_A505UOYN3ASL6_CL17605006_QB28207756_REV00_user_low_ship.tar.md5
USERDATA_VZW_A505USQU3ASL6_CL17605006_QB28207756_REV00_user_low_ship.tar.md5
ro.build.PDA=A505USQS3ASL4
AP_A505USQS3ASL4_CL16561534_QB27874851_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505USQS3ASL4_CL16561534_QB27874851_REV00_user_low_ship.tar.md5
CP_A505USQS3ASL4_CP14622435_CL16561534_QB27874851_REV00_user_low_ship.tar.md5
CSC_OMC_OYN_A505UOYN3ASL4_CL16561534_QB27874851_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OYN_A505UOYN3ASL4_CL16561534_QB27874851_REV00_user_low_ship.tar.md5
USERDATA_VZW_A505USQS3ASL4_CL16561534_QB27874851_REV00_user_low_ship.tar.md5
ro.build.PDA=A505USQU3ASL6
AP_A505USQU3ASL6_CL17605006_QB28207756_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505USQU3ASL6_CL17605006_QB28207756_REV00_user_low_ship.tar.md5
CP_A505USQU3ASL6_CP14753468_CL17605006_QB28207756_REV00_user_low_ship.tar.md5
CSC_OMC_OYN_A505UOYN3ASL6_CL17605006_QB28207756_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OYN_A505UOYN3ASL6_CL17605006_QB28207756_REV00_user_low_ship.tar.md5
USERDATA_VZW_A505USQU3ASL6_CL17605006_QB28207756_REV00_user_low_ship.tar.md5
ro.build.PDA=A505USQS3ASK1
AP_A505USQS3ASK1_CL16561534_QB27058434_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505USQS3ASK1_CL16561534_QB27058434_REV00_user_low_ship.tar.md5
CP_A505USQS3ASK1_CP14273875_CL16561534_QB27058434_REV00_user_low_ship.tar.md5
CSC_OMC_OYN_A505UOYN3ASK1_CL16561534_QB27058434_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OYN_A505UOYN3ASK1_CL16561534_QB27058434_REV00_user_low_ship.tar.md5
USERDATA_VZW_A505USQS3ASK1_CL16561534_QB27058434_REV00_user_low_ship.tar.md5
ro.build.PDA=A505USQS2ASI5
AP_A505USQS2ASI5_CL16561534_QB26117931_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505USQS2ASI5_CL16561534_QB26117931_REV00_user_low_ship.tar.md5
CP_A505USQS2ASI5_CP13892942_CL16561534_QB26117931_REV00_user_low_ship.tar.md5
CSC_OMC_OYN_A505UOYN2ASI5_CL16561534_QB26117931_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OYN_A505UOYN2ASI5_CL16561534_QB26117931_REV00_user_low_ship.tar.md5
USERDATA_VZW_A505USQS2ASI5_CL16561534_QB26117931_REV00_user_low_ship.tar.md5
ro.build.PDA=A505USQU2ASH2
AP_A505USQU2ASH2_CL16561534_QB25260405_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505USQU2ASH2_CL16561534_QB25260405_REV00_user_low_ship.tar.md5
CP_A505USQU2ASH2_CP13520131_CL16561534_QB25260405_REV00_user_low_ship.tar.md5
CSC_OMC_OYN_A505UOYN2ASH2_CL16561534_QB25260405_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OYN_A505UOYN2ASH2_CL16561534_QB25260405_REV00_user_low_ship.tar.md5
USERDATA_VZW_A505USQU2ASH2_CL16561534_QB25260405_REV00_user_low_ship.tar.md5
ro.build.PDA=A505USQU1ASEL
AP_A505USQU1ASEL_CL15991926_QB23984032_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505USQU1ASEL_CL15991926_QB23984032_REV00_user_low_ship.tar.md5
CP_A505USQU1ASEL_CP12845390_CL15991926_QB23984032_REV00_user_low_ship.tar.md5
CSC_OMC_OYN_A505UOYN1ASEL_CL15991926_QB23984032_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OYN_A505UOYN1ASEL_CL15991926_QB23984032_REV00_user_low_ship.tar.md5
USERDATA_VZW_A505USQU1ASEL_CL15991926_QB23984032_REV00_user_low_ship.tar.md5
Other SIM Card : Download any PDA version but just flash AP, BL, HOME_CSC md5 file without CP Modem and Userdata file.
SM-A505U1 Unlocked Android 9.0 Pie Firmware download: here
ro.product.manufacturer=samsung
ro.product.model=SM-A505U1
ro.build.product=a50
Country: USA
Multi CSC : OYM
Unlocked SM-A505UZKNXAA
SIM Card support any US service providers such as AT&T, C Spire, US Cellular, Xfinity Mobile, Cricket, Nextel,Cingular, Sprint, T-Mobile, Verizon, MetroPCS, Tracfone, StraightTalk, Boost Mobile, Aio, H20 Wireless, Virgin Mobile, Simple Mobile, Family Mobile, Viaero.
SM-A505U1 Firmware Update Info:
ro.build.PDA=A505U1UES4ATA1
AP_A505U1UES4ATA1_CL16619022_QB28759508_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505U1UES4ATA1_CL16619022_QB28759508_REV00_user_low_ship.tar.md5
CP_A505U1UES4ATA1_CP14945572_CL16619022_QB28759508_REV00_user_low_ship.tar.md5
CSC_OMC_OYM_A505U1OYM4ATA1_CL16619022_QB28759508_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OYM_A505U1OYM4ATA1_CL16619022_QB28759508_REV00_user_low_ship.tar.md5
ro.build.PDA=A505U1UES3ASL1
AP_A505U1UES3ASL1_CL16619022_QB28033081_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505U1UES3ASL1_CL16619022_QB28033081_REV00_user_low_ship.tar.md5
CP_A505U1UES3ASL1_CP14687119_CL16619022_QB28033081_REV00_user_low_ship.tar.md5
CSC_OMC_OYM_A505U1OYM3ASL1_CL16619022_QB28033081_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OYM_A505U1OYM3ASL1_CL16619022_QB28033081_REV00_user_low_ship.tar.md5
ro.build.PDA=A505U1UES3ASK1
AP_A505U1UES3ASK1_CL16619022_QB27346290_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505U1UES3ASK1_CL16619022_QB27346290_REV00_user_low_ship.tar.md5
CP_A505U1UES3ASK1_CP14408453_CL16619022_QB27346290_REV00_user_low_ship.tar.md5
CSC_OMC_OYM_A505U1OYM3ASK1_CL16619022_QB27346290_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OYM_A505U1OYM3ASK1_CL16619022_QB27346290_REV00_user_low_ship.tar.md5
ro.build.PDA=A505U1UES3ASJ3
AP_A505U1UES3ASJ3_CL16619022_QB26750267_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505U1UES3ASJ3_CL16619022_QB26750267_REV00_user_low_ship.tar.md5
CP_A505U1UES3ASJ3_CP14171116_CL16619022_QB26750267_REV00_user_low_ship.tar.md5
CSC_OMC_OYM_A505U1OYM3ASJ3_CL16619022_QB26750267_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OYM_A505U1OYM3ASJ3_CL16619022_QB26750267_REV00_user_low_ship.tar.md5
ro.build.PDA=A505U1UES2ASI5
AP_A505U1UES2ASI5_CL16619022_QB26218376_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505U1UES2ASI5_CL16619022_QB26218376_REV00_user_low_ship.tar.md5
CP_A505U1UES2ASI5_CP13936899_CL16619022_QB26218376_REV00_user_low_ship.tar.md5
CSC_OMC_OYM_A505U1OYM2ASI5_CL16619022_QB26218376_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OYM_A505U1OYM2ASI5_CL16619022_QB26218376_REV00_user_low_ship.tar.md5
ro.build.PDA=A505U1UEU2ASH6
AP_A505U1UEU2ASH6_CL16619022_QB25442981_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505U1UEU2ASH6_CL16619022_QB25442981_REV00_user_low_ship.tar.md5
CP_A505U1UEU2ASH6_CP13600867_CL16619022_QB25442981_REV00_user_low_ship.tar.md5
CSC_OMC_OYM_A505U1OYM2ASH6_CL16619022_QB25442981_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OYM_A505U1OYM2ASH6_CL16619022_QB25442981_REV00_user_low_ship.tar.md5
SM-A505F/DS Android 9.0 Pie Firmware download: here
ro.product.manufacturer=samsung
ro.product.model=SM-A505F
ro.build.product=a50
ro.product.name=a50dd
ro.product.device=a50
ro.hardware.chipname=exynos9610
Multi CSC code: OLM (Southeast asia) -> Build number / ro.build.version.incremental=A505FDDU1ASC8
Multi CSC code: (India, Neval, SriLanka) -> Build number / ro.build.version.incremental=A505FODM1ASB7
Multi CSC code: OJM (Arabic, Africa, Middle East) -> Build number / ro.build.version.incremental=A505FDDU1ASC8
SM-A505FN/DS Android 9.0 Pie Firmware download: here
Multi CSC code: OXM
Country:
Austria (ATO), Belgium (BSE), Belgium (PRO), Bosnia and Herzegovina (ERO), Bulgaria (BGL), Bulgaria Vivacom (VVT), Caucasus Countries (CAU), Croatia TELE2 (TWO), Cyprus (CYO), Czech Republic (XEZ), Czech Republic (ETL), France (XEF), Germany (DBT), Greece (EUR), Hungary (OAW), Hungary (XEH ), Hungary Telenor (PAN), Italy (ITV), Kazakhstan (SKZ), Korea (KOR), Luxembourg (LUX), Netherlands (PHN), North Eastern Europe (NEE), Poland (XEO), Portugal (TPH), Romania (ROM), Russian (SER), Serbia (SEE), Serbia (TSR), Serbia Telenor (MSR), Slovakia (ORS), Slovakia (XSK), Slovakia (ORX), Slovenia (SIO), South East Europe (SEE), Spain (PHE), Switzerland (AUT), Ukraine (RTL), Ukraine (SEK), United Kingdom (BTU), United Kingdom (XEU), United Kingdom Carphone Warehouse (CPW), Uzbekistan (CAC).
ro.product.manufacturer=samsung
ro.product.model=SM-A505FN
ro.build.product=a50
ro.product.name=a50xx
ro.product.device=a50
ro.hardware.chipname=exynos9610
ro.build.PDA=A505FNXXU1ASBG
SM-A505FM/DS Android 9.0 Pie Firmware download: here
Multi CSC code: OXM
Country:
Austria (ATO), Belgium (BSE), Belgium (PRO), Bosnia and Herzegovina (ERO), Bulgaria (BGL), Bulgaria Vivacom (VVT), Caucasus Countries (CAU), Croatia TELE2 (TWO), Cyprus (CYO), Czech Republic (XEZ), Czech Republic (ETL), France (XEF), Germany (DBT), Greece (EUR), Hungary (OAW), Hungary (XEH ), Hungary Telenor (PAN), Italy (ITV), Kazakhstan (SKZ), Korea (KOR), Luxembourg (LUX), Netherlands (PHN), North Eastern Europe (NEE), Poland (XEO), Portugal (TPH), Romania (ROM), Russian (SER), Serbia (SEE), Serbia (TSR), Serbia Telenor (MSR), Slovakia (ORS), Slovakia (XSK), Slovakia (ORX), Slovenia (SIO), South East Europe (SEE), Spain (PHE), Switzerland (AUT), Ukraine (RTL), Ukraine (SEK), United Kingdom (BTU), United Kingdom (XEU), United Kingdom Carphone Warehouse (CPW), Uzbekistan (CAC).
ro.product.manufacturer=samsung
ro.product.model=SM-A505FM
ro.build.product=a50
ro.product.name=a50ser
ro.product.device=a50
ro.hardware.chipname=exynos9610
ro.build.PDA=A505FMPUU1ASBD
SM-A505GN/DS Android 9.0 Pie Firmware download: here
Multi CSC code: OLO
Country:
New Zealand, Papua New Guinea, Fiji, Taiwan, Philippines, Hong Kong SAR China, Australia, Singapore
ro.product.manufacturer=samsung
ro.product.model=SM-A505GN
ro.build.version.sdk=28
ro.build.product=a50
ro.product.name=a50xtc
ro.product.device=a50
ro.hardware.chipname=exynos9610
ro.build.PDA=A505GNDXU1ASBA
SM-A505GT/DS Android 9.0 Pie Firmware download: here
Multi CSC code: OWO
Country:
Belize, Costa Rica, Guatemala, El Salvador, Honduras, Nicaragua, Panama, Saint-Martin, Mexico, South America, Chile, Colombia, Ecuador, Argentina, Bolivia, Brazil, French Guiana, Peru, Suriname, Guyana, Paraguay, Uruguay, Caribbean countries, Cuba, Venezuela, Dominican Republic, Haiti, Guadeloupe, Puerto Rico, Martinique, Saint-Barthélemy
ro.product.manufacturer=samsung
ro.hardware.chipname=exynos9610
ro.product.model=SM-A505GT
ro.build.product=a50
ro.product.name=a50dtvvj
ro.product.device=a50
ro.hardware.chipname=exynos9610
ro.build.PDA=A505GTUBU1ASBD
SM-A505W Canadian Android 9.0 Pie Firmware download: here
Multi CSC code: OYV
Country: Canada
Carrier:
All Mobile Operator / Unlocked (XAC), Bell Mobile (BMC), Bell-Internet (PCM), chatr (CHR), EastLink (ESK), Fido Mobile (FMC), Globalive Wind Mobile (GLW), Koodo Mobile (KDO), Public Mobile (PMB), Rogers (RWC), SaskTel (BWA), Telus (TLS), Unlocked (SPC), Videotron (VTR), Virgin Mobile (VMC), Belarus Xplore Mobile (MTB), Tanzania Bell Mobility (SOL).
ro.product.manufacturer=samsung
ro.product.model=SM-A505W
ro.build.version.sdk=28
ro.build.product=a50
ro.product.name=a50cs
ro.product.device=a50
ro.hardware.chipname=exynos9610
ro.build.PDA=A505WVLU2ASJ1
SM-A505W_A50_CAN_SINGLE.pit
AP_A505WVLU2ASJ1_CL17020609_QB26442625_REV00_user_low_ship_meta_OS9.tar.md5
BL_A505WVLU2ASJ1_CL17020609_QB26442625_REV00_user_low_ship.tar.md5
CP_A505WVLU2ASJ1_CP14033405_CL17020609_QB26442625_REV00_user_low_ship.tar.md5
CSC_OMC_OYV_A505WOYV2ASJ1_CL17020609_QB26442625_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OYV_A505WOYV2ASJ1_CL17020609_QB26442625_REV00_user_low_ship.tar.md5
Unbricking / 5 Flash File Samsung Galaxy A50 / Full Repair Firmware :
Prepare USB Cable data & Windows OS 32/64bit PC
Video tutorial: https://www.youtube.com/watch?v=wKaJtCeBoCk
On The PC, download & UnpackFull repair firmware: here
On The PC. download & Install Samsung USB Driver : here
On The PC, download & Install Latest version of Samsung Flashing Tool: Odin3 v3.13.1
Turn off your Samsung, then switch it on again to download mode "Press simultaneously VOL UP+DOWN & HOME button"
Open ODIN.exe
On ODIN FLASH, Apply the file to the appropriate places, e.g.
PIT file -> A50_SWA_OPEN.pit
AP / PDA File -> AP_A505FDDU1ASC7_CL15640918_QB22849775_REV00_user_low_ship_meta_OS9.tar.md5
BL File -> BL_A505FDDU1ASC7_CL15640918_QB22849775_REV00_user_low_ship.tar.md5CP_A505FXXU1ASC4_CP12202815_CL15640918_QB22711698_REV00_user_low_ship.tar.md5
CSC -> CSC_OMC_OJM_A505FOJM1ASC9_CL15720306_QB22955183_REV00_user_low_ship.tar.md5
USER DATA -> HOME_CSC_OMC_OJM_A505FOJM1ASC9_CL15720306_QB22955183_REV00_user_low_ship.tar.md5
Connect the USB cable and Click START on Odin
Wait until the installation process is complete, Done.:good:
After Flashing or Factory data Reset you need re-enter Google Account, if Forgot Gmail you can bypass FRP Google Account Verifications without PC on this tutorial , or you can flash Combination file or Any Custom rom for your Galaxy A50 such as Cyanogen Mod, LineagoOS, etc. But need Unlocking OEM bootloader, rooting & twrp installed on your device.
Useful for MOD and Porting
SM-A505F Stock kernel boot.img "Unpacked from .lz4 to .img"
SM-A505F Stock recovery.img "Unpacked from .lz4 to .img"
SM-A505F System.zip "Unpacked from System.img", like System/app/.....apk , System/bin/... , System/etc/... , System/lib/...
All file -> download here
SM-A505FM Stock kernel boot.img "Unpacked from .lz4 to .img"
SM-A505FM Stock recovery.img "Unpacked from .lz4 to .img"
All file -> download here
SM-A505FN Stock kernel boot.img "Unpacked from .lz4 to .img"
SM-A505FN Stock recovery.img "Unpacked from .lz4 to .img"
All file -> download here
SM-A505FM Stock kernel boot.img "Unpacked from .lz4 to .img"
SM-A505FM Stock recovery.img "Unpacked from .lz4 to .img"
All file -> download here
SM-A505GN Stock kernel boot.img "Unpacked from .lz4 to .img"
SM-A505GN Stock recovery.img "Unpacked from .lz4 to .img"
All file -> download here
SM-A505GT Stock kernel boot.img "Unpacked from .lz4 to .img"
SM-A505GT Stock recovery.img "Unpacked from .lz4 to .img"
All file -> download here
Notes:
If your secure download is ENABLED, please flash 5 Firmware file above to repair
vickbuitenzorg said:
Firmware info:
ro.product.manufacturer=samsung
ro.hardware.chipname=exynos9610
ro.product.model=SM-A505F
ro.build.product=a50
ro.product.name=a50dd
ro.product.device=a50
Stock rom Global Region code:
OLM (Southeast asia) -> Build number / ro.build.version.incremental=A505FDDU1ASC8
ODM (India, Neval, SriLanka) -> Build number / ro.build.version.incremental=A505FODM1ASB7
OJM (Arabic, Africa, Middle East) -> Build number / ro.build.version.incremental=A505FDDU1ASC8
Unbricking / 5 Flash File Samsung Galaxy A50 SM-A5005F/DS / Full Repair Firmware :
Prepare USB Cable data & Windows OS 32/64bit PC
Video tutorial:
On The PC, download & UnpackFull repair firmware: here
On The PC. download & Install Samsung USB Driver : here
On The PC, download & Install Latest version of Samsung Flashing Tool: Odin3 v3.13.1
Turn off your Samsung, then switch it on again to download mode "Press simultaneously VOL UP+DOWN & HOME button"
Open ODIN.exe
On ODIN FLASH, Apply the file to the appropriate places, e.g.
PIT file -> A50_SWA_OPEN.pit
AP / PDA File -> AP_A505FDDU1ASC7_CL15640918_QB22849775_REV00_user_low_ship_meta_OS9.tar.md5
BL File -> BL_A505FDDU1ASC7_CL15640918_QB22849775_REV00_user_low_ship.tar.md5CP_A505FXXU1ASC4_CP12202815_CL15640918_QB22711698_REV00_user_low_ship.tar.md5
CSC -> CSC_OMC_OJM_A505FOJM1ASC9_CL15720306_QB22955183_REV00_user_low_ship.tar.md5
USER DATA -> HOME_CSC_OMC_OJM_A505FOJM1ASC9_CL15720306_QB22955183_REV00_user_low_ship.tar.md5
Connect the USB cable and Click START on Odin
Wait until the installation process is complete, Done.:good:
Useful for MOD and Porting
Link -> Download
Stock kernel boot.img "Unpacked from .lz4 to .img"
Stock recovery.img "Unpacked from .lz4 to .img"
System.zip "Unpacked from System.img", like System/app/.....apk , System/bin/... , System/etc/... , System/lib/...
Notes: If your secure download is ENABLED, please flash 5 Firmware file above to repair.
Build.prop / characteristics
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=PPR1.180610.011
ro.build.display.id=PPR1.180610.011.A505FDDU1ASC8
ro.build.version.incremental=A505FDDU1ASC8
ro.build.version.sdk=28
ro.build.version.preview_sdk=0
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=9
ro.build.version.security_patch=2019-03-01
ro.build.version.base_os=
ro.build.version.security_index=1
ro.build.version.min_supported_target_sdk=17
ro.build.date=Wed Mar 27 11:59:48 KST 2019
ro.build.date.utc=1553655588
ro.build.type=user
ro.build.user=dpi
ro.build.host=21HH1D24
ro.build.tags=release-keys
ro.build.flavor=a50dd-user
ro.build.system_root_image=true
ro.product.model=SM-A505F
ro.product.brand=samsung
# ro.build.product is obsolete; use ro.product.device
ro.build.product=a50
ro.product.name=a50dd
ro.product.device=a50
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.manufacturer=samsung
ro.product.locale=en-GB
ro.wifi.channels=
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=a50dd-user 9 PPR1.180610.011 A505FDDU1ASC8 release-keys
ro.build.fingerprint=samsung/a50dd/a50:9/PPR1.180610.011/A505FDDU1ASC8:user/release-keys
ro.build.characteristics=phone
# Samsung Specific Properties
ro.build.PDA=A505FDDU1ASC8
ro.build.official.release=true
ro.build.2ndbrand=false
ro.config.rm_preload_enabled=1
ro.build.changelist=15640918
ro.product_ship=true
ro.hardware.chipname=exynos9610
# end build properties
#
# from device/samsung/a50/system.prop
#
#
# system.prop for universal9610
#
ro.arch=exynos9610
ro.kernel.qemu=0
ro.kernel.qemu.gles=2
persist.demo.hdmirotationlock=false
#Enable S.LSI USB settings
dev.usbsetting.embedded=on
#RILD debug level setting
ro.debug_level=0x494d
#for DTV FullSeg SD Recording..
oneseg.extSdCard.path=/storage/extSdCard
#Cmc properties
ro.cmc.device_type=pd
ro.cmc.version=2.0
#Enable csc for vendor image
ro.vendor.cscsupported=1
#Netflix custom property for A50 OTA only
ro.netflix.bsp_rev=A505-17358-1
persist.radio.multisim.config=dsds
import /mnt/vendor/efs/factory.prop
ro.multisim.simslotcount=2
ro.vendor.multisim.simslotcount=2
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.treble.enabled=true
ro.build.version.sem=2801
ro.build.version.sep=100100
ro.build.selinux=1
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm64.variant=generic
dalvik.vm.isa.arm64.features=default
dalvik.vm.isa.arm.variant=cortex-a15
dalvik.vm.isa.arm.features=default
ro.config.knox=v30
ro.config.tima=1
ro.config.timaversion=3.0
ro.config.timaversion_info=Knox3.2_S.R.R
ro.config.iccc_version=3.0
ro.proca.version=2.0
ro.config.dmverity=A
ro.kernel.qemu=0
iwc.arg1=0
iwc.arg2=0
iwc.arg3=0
net.bt.name=Android
dalvik.vm.stack-trace-dir=/data/anr
ro.expect.recovery_id=0xfdbb9357cd7b654cc18d8e44e1e27322bb5c87b8000000000000000000000000
Click to expand...
Click to collapse
Helpful.
Just a noob question..
Can I flash the A505FD firmware to my A505GN device?
Thanks!
yukimoto16 said:
Just a noob question..
Can I flash the A505FD firmware to my A505GN device?
Thanks!
Click to expand...
Click to collapse
I have flashed the a505gn on an a505g works as far as i can tell. I'd say if you can get your hands on the a505gn firmware you have now, theres a good chance you can always odin back to a505gn.
Hi. I have flashed my a505f to a505fn. All good, but I dont update my firmaware with wifi. It writes error. And nfc disappeared. What should I do?
Just learned that my new A50 is a non-NFC variety, A505F when I was setting up Google Pay. I feel like an idiot. Now, does that mean that the hardware is not there? Or can I flash A505FN and NFC will work (assuming it has the hardware)? Thanks all!
Any custom ROM for Galaxy A505W Carrier: XAC Canada?? I have already wiped everything and formated data with TWRP so reply fast!!! Name and version with link will be appreciated!!! Thanks in advance!!!