Develop Bugs

[GUIDE] 2e recovery and Tegrak's kernel !!!BACKUP BEFORE PROCEED!!!

THERE WERE AT LEAST TWO REPORTS OF SYSTEM FAILURE AFTER THIS UPDATE, BOTH HAD LAGFIX ENABLED.
!!!BACKUP BEFORE PROCEED!!!
This guide is to help those who would like to test tegrak's kernel but have dowbts about losing ability to flash zip files from CWM. This will also help those who would like to have simple root solution, and 2e recovery on froyo.
a) If you want to have simple root solution, one click lagfix and 2e recovery. Tested with Doc's v9.1.4 but should work on any rom including stock
1. flash tegrak's kernel found here http://forum.xda-developers.com/showthread.php?t=920711 using Odin (all instructions in tegrak's thread)
2. install Tegrak lagfix app from the market and install root from the app's menu
3. download attached file
4. extract this file saving directory structure and copy it's system folder into /sdcard/tegrak/update/00/ (If this path doesnt exist, create those folders) so your path should look like /sdcard/tegrak/update/00/system/...
5. reboot your phone into tegrak's recovery (simply reboot your phone and press home button when you see tegrak's kernel introduction)
6. (before proceed with this step backup your system partition from the same tegraks recovery) choose update from sdcard and select 00 folder
7. Install Rom Manager from the market and flash CWM from it. Now you have tegrak's kernel and CWM to flash all types of zip files.
a) If you already rooted your phone
1. flash tegrak's kernel found here http://forum.xda-developers.com/showthread.php?t=920711 using Odin (all instructions in tegrak's thread)
2. install Tegrak lagfix app from the market
3. download attached file
4. extract this file saving directory structure and copy it's system folder into /sdcard/tegrak/update/00/ (If this path doesnt exist, create those folders) so your path should look like /sdcard/tegrak/update/00/system/...
5. reboot your phone into tegrak's recovery (simply reboot your phone and press home button when you see tegrak's kernel introduction)
6. (before proceed with this step backup your system partition from the same tegraks recovery) choose update from sdcard and select 00 folder
7. Install Rom Manager from the market and flash CWM from it. Now you have tegrak's kernel and CWM to flash all types of zip files.
All this process replaces your 3e recovery with 2e recovery image and as tegrak's kernel does not overrides original recovery image your CWM will be untouched by tegrak's kernel, and you will successfully have combination of two recoveries (CWM and Tegrak's) To access CWM you can chose "reboot in recovery" from the Rom Manager menu or from Tegrak lagfix menu, and to access tegrak's recovery, press home button when you see tegrak's kernel introductory window while booting up your phone.

Brack11, thanks for the guide, but you should be posting this over to the general subforum.
Sent from my GT-I9000 using XDA App

g00ndu said:
Brack11, thanks for the guide, but you should be posting this over to the general subforum.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I think it's too advanced and dangerous for novices that mostly visit general. Also both described things 2e recovery and tegrak's kernel are from the area of development, this is all about customizing rom. I dont agree that it should be in general.

Thanks a lot!!

I also fail with barebone rom with incorporated tegrak kernel in 3e recovery,**** m8 spend all day to fix it & get back to insanity rom
10ks m8 for your efort

hensk said:
I also fail with barebone rom with incorporated tegrak kernel in 3e recovery,**** m8 spend all day to fix it & get back to insanity rom
10ks m8 for your efort
Click to expand...
Click to collapse
As I understand this fix didn't work for you, could you share to others what and how has failed?
Sent from my GT-I9000

no, no mate, just did not know that there is
thread like this,with fix solution

hensk said:
no, no mate, just did not know that there is
thread like this,with fix solution
Click to expand...
Click to collapse
Glad to hear that this works for you, thanks are accepted
Sent from my GT-I9000

brack11 said:
Glad to hear that this works for you, thanks are accepted
Sent from my GT-I9000
Click to expand...
Click to collapse
Point to note, this may even be only me.
The CWM does not reside in the kernel. Rebooting through recovery will only bring back to 2e. I need to apply update.zip again, reboot through recovery to get CWM. This happens everytime when going to recovery.
Sent from my GT-I9000 using XDA App

g00ndu said:
Point to note, this may even be only me.
The CWM does not reside in the kernel. Rebooting through recovery will only bring back to 2e. I need to apply update.zip again, reboot through recovery to get CWM. This happens everytime when going to recovery.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
You are right, this has nothing to do with tegraks kernel or with recovery, I has this issue when I has rooted phone without custom kernel. It would always go to standard recovery and then I would have to apply update. I believe thoa is some special feature of the device.
Sent from my GT-I9000

brack11 said:
You are right, this has nothing to do with tegraks kernel or with recovery, I has this issue when I has rooted phone without custom kernel. It would always go to standard recovery and then I would have to apply update. I believe thoa is some special feature of the device.
Sent from my GT-I9000
Click to expand...
Click to collapse
Iirc, when I use Rom Manager the last time, it wasn't like that at all. Reboot let me goes directly to CWM. I only need to download it and apply it once.
Sent from my GT-I9000 using XDA App

g00ndu said:
Iirc, when I use Rom Manager the last time, it wasn't like that at all. Reboot let me goes directly to CWM. I only need to download it and apply it once.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Well, the tegraks kernel doesn't really replaces kernel, and if the kernel is stock you get thesame behaviour as you should have with the stock kernel, as I say, I never had rommanager be as default recovery, always either through update.zip or custom kernel (which is not custom in tegraks case)
Sent from my GT-I9000

brack11 said:
Well, the tegraks kernel doesn't really replaces kernel, and if the kernel is stock you get thesame behaviour as you should have with the stock kernel, as I say, I never had rommanager be as default recovery, always either through update.zip or custom kernel (which is not custom in tegraks case)
Sent from my GT-I9000
Click to expand...
Click to collapse
I understand, back in the days before the speedmod, voodoo or even the oc kernels, i installed the ROM manager and had made CWM as the default recovery. Anyway, it is still okay, I guess. Btw, using tegrak's kernel, have you tried using update zips via cwm?
I have not tried it yet, since I find that updating via tegrak method works very well for me.

g00ndu said:
I understand, back in the days before the speedmod, voodoo or even the oc kernels, i installed the ROM manager and had made CWM as the default recovery. Anyway, it is still okay, I guess. Btw, using tegrak's kernel, have you tried using update zips via cwm?
I have not tried it yet, since I find that updating via tegrak method works very well for me.
Click to expand...
Click to collapse
Yes, I used a few times to flash different modems and r64 theme.

Unfortunately this did not work for me (XWJS5), got stuck on initial splash screen, luckily Dean-O's post http://forum.xda-developers.com/showpost.php?p=10562493&postcount=80 saved my ass.
I've been unable to get 2e recovery working on a bear-bones kernel since XXJPY.

fomofo said:
Unfortunately this did not work for me (XWJS5), got stuck on initial splash screen, luckily Dean-O's post http://forum.xda-developers.com/showpost.php?p=10562493&postcount=80 saved my ass.
I've been unable to get 2e recovery working on a bear-bones kernel since XXJPY.
Click to expand...
Click to collapse
Did you have lagfix enabled? As I can say from my own experience.now - this hack is DANGEROS if you have lagfix enabled. To say more any manipulations with recovery while on onenand fix - DANGEROUS AND LEAD TO LOOSING ALL PARTITIONS
Sent from my GT-I9000

brack11 said:
Did you have lagfix enabled?
Click to expand...
Click to collapse
No, I have used the "hack" recovery 2e method with success right up until JPY, but JS3, and now JS5 does not work.
It seems to me (just learning Android), that it doesn't have write permissions to the /sbin directory, which is what the recovery script needs.
Recovery 2e works with CF-root, but I already have root, and rather not overwrite the stock kernel.

Ok, yesterday I have thoroughly tested my workarounnd for installing rom. I hade Doc's 9.6 downloaded 9.8 reboot into recovery using rommanager option, wiped cach partition, wiped dalvik, wiped data, flashed 9.8, wiped data again, and flashed again, rebooted, restored titanium backups, flashed tegrak's kernel, flashed update for recovery 2e from within tegrak's kernel, then rebooted into 2e recovery, flashed new modem (JVE) and flashed theme r64, rebooted, everything works as it should no errors no hangs no loops.

Does this still work?

[TutoriAL] 9001 starters: root deox get KQ7 & all you want

well, I own the 9001 now for 4 days, had a lot of boot loops, recoveries and am finally satisfied - I want to show you an easy way to get there faster:
1) root (easy) http://forum.xda-developers.com/showthread.php?t=1253707
thanks to KeksKlip - (to get into recovery you need to shut off, press Volume up and Power until Samsung appears, then wait for the box and press menu)
2) recovery (not so easy) - you will be happy to have a backup, so this is really wise to install it. The recovery from RomManager does not work - you have to install this modded recovery.
http://forum.xda-developers.com/showthread.php?t=1331164 [Release]FeaMod Recovery 1.4 - based on CWM Recovery v. 5.5.0.4. thanks to manveru0
You have to flash only FeaMod v1.2 (you need not more than that) therefore you need odin and AriesVE - links at the bottom of this thread. (you need them also for the next step)
To get your Phone into downloading mode you have to shut it down and press power volume down and home at the same time. After 5 seconds you see a nice downloading picture.
After flashing sucessfully you can make your fist backup (chose backup to internal card -it is faster)
3) new ROM (easy when you succeed with the last step) http://forum.xda-developers.com/showthread.php?t=1533029 [ROM] I9001XXKQ7 [Android 2.3.6] thanks to mozgoder
Same procedure as before. You have to flash it by downloading mode.
Now you have a odexed KQ7 ROM (you need something like that for step 5) -and a nice lockscreen!
3a) root it (point 1 again) and install busybox installer from the market (I am not sure, if it is necessary, but you will need it later)
4) deodex your ROM (easy) - this step is required for installing additional themes etc. you can install it by recovery - that means, you have to copy the file to (internal) sdcard and choose this file by recovery: thanks to crybert http://forum.xda-developers.com/showpost.php?p=23321508&postcount=24
(or try this link http://www.mediafire.com/?mjabvv2loub3z35 )
wow, now you have a brilliant deodexed ROM! If everything went fine this far all apps and datas are still where they should be.
Make a backup!
5) now its getting vibrant - you can beginn modding your phone.
[TOOL] - Galaxy S Plus Configurator BETA 5 thanks to broodplank1337
http://forum.xda-developers.com/showthread.php?t=1466056
A great tool! Download it, start it, try it. It tells you what to do - so please read the text and do it that way - no error occured to me.
Start with kernel, then accelerator and so on. Make your choice.
There is also an option for boot loops - I did not try it, but have it in mind, in case of..
So, now you have your phone as you like it - good luck and have fun!

OR.. you just flash broodplanks broodROM RC3 Rev2 (RC4 relesing tomorrow!).
then you got an awesome custom rom, rooted, deodexed and easy.
broodROM RC3 Rev2
imo best rom for i9001!

[GUIDE] Official Update [UCLJ3] ATT Update with Root!

***MOVING ICEPOP ROM TO SEPARATE THREAD***​Here is a good guide to updating your Captivate Glide to the OFFICIAL UCLJ3 update which includes all the fixes that were borked in the Leaked ICS release!​
First off I'd like to send credit where credit is due...
Dman3285 (cm10)
Thegreatergood (literom & kernel)
Aquethys (cwmr 6)
Kombatant (ICS tethering fix)
ItsMeBdon (root)
if I missed someone please let me know!
I quickly threw this together as a step by step guide to update your captivate glide with the oficial ICS released in October '2012
I'm new to modding and developing with android code. any help, suggestions and advice is always welcome.
Disclaimer: no member here in XDA developers will be responsible for a bricked device. I have tested this guide myself and has proved to work well. please proceed with caution. Read through the guide before hand!
I will soon jaz up this thread and with permission from the devs that provided the files, post them for downloading here!
Official ICS from ATT Guide
this process is done using a pc running windows os.
neededdin 3.07
Cwmr 6.0
Official ics update
EFS Pro 1.12.6
Samsung usb drivers
7zip
Superuser-3.2-RC3-arm-signed.zip
1.use cwmr to make a backup of your current android system.
2.use efs pro to make a backup of your efs folder. make sure you keep it in a save place like on your pc
3.copy your "clockworkmod" folder from your internal phone memory to your pc. that is your cwmr system backup
if your currently running Dman's cm10, make sure cwmr 6.0 is installed.
there is an option under mounts and storage to mount usb mass storage. connect the usb cable and copy your files!
4.while your usb is connected, copy all your pictures, music and other important files you want to save.
after the update it all may be lost!
5.if you're like me and have apps installed that were not from the market, you might want to use a app backup utility
save them and copy them to your pc for later use!
6.open the official ics update zip and extract the files to your desktop using 7zip.
7.open odin3 (right click and run as administrator)
8.Reboot your glide in download mode by holding the volume up and power together,
be sure when prompted to continue pres the appropriate button.
9.You should now see "Added!" in the message box of odin. click the "PDA" button and select the md5 file you extracted.
10.make sure you UN-CHECK all the boxes except for the pda! THIS IS A MUST!!
11.click start. there will be test displayed in message box! wait till you get a green box showing Pass! and in the message box
display "All threads completed (succeed 1 / failed 0)"
12.remove the usb cable and reboot the phone. you now have the official ics update installed stock with no root.
if for some reason you phone gets stuck on the att splash screen, reboot into recovery and do a factory reset!
13.you will now need to re-flash cwmr 6 using the same method starting with step 8. selecting the recovery file in pda.
14.now to root, boot into cwmr and flash Superuser-3.2-RC3-arm-signed.zip. reboot and you should have root!

New Flashable Rom is Born!!
here is a cwmr flashable zip of the new ICS release for testing
Things I have done....
Rooted with super su
Deodexed and zipalinged
removed some bloat ware (work in progress)
included some useful apps in /data/app
moved a few apps from /system/app to /data/app enabling them to be updated through Google
Flashing Instructions....
make nand backup of your current rom...
wipe data, cache
format /system.
flash zip.
upon reboot will be asked to fix root... choose yes.
what worked for me...
after reboot, let sit a few to stablize, then before running setup hold the power and reboot again.
run through setup.
to enable the included custom boot animation, flash Thegreatergood's kernel!
also his R4 release of 14 toggles works!
(a thanks goes out to him for his kernel and thr 14 toggles)
Beta 1 Change log
Removed some bloat
deodexed and zipaligned
Rooted
Custom Boot animation (when LiteKernel 1.0 flashed)
Added... (updateable apps "/data/app")
Apex launcher
Anycut shortcut creator
1 click Wifi Hotspot
ES File Manager
Facebook
Titanium Backup
Swipe Beta
Beta 2 change log
Now good enough to name Rom!!
Calling it Ice Pop Rom! named after Icecream Sandwich
Version 1.3
Removed more bloat
integrated...
Custom Boot animation
Dman's EPM
Crt off animation
Thegreatergood's quick toggles
LiteKernel v.1.1 with boot animation sound enabled
Added... (update-able apps "/data/app")
Music Junk
Fb Contact sync
qr droid
sms backup+
Boot animations
Rom customizer
Google Drive
Wifi file transfer
Dolphin browser for pc style browsing
Added.... (system apps "/system/app")
Cm10 File manager (WIP)
Beta 1 Release
Beta 2 Release
Credits and Thanks... If I have missed someone Slap me!! (message me)
Dman3285
TheGreaterGood
Aquethys

Or you could do it this way too haha
1. Cleared everything off my phone via CWMR to start completely fresh
(Follow the directions and download the files from here http://androidromupdate.com/2012/09/08/i927uclh2-ics-4-0-4-samsung-sgh-i927-captivate-glide-firmware-upgrade-official-kiesota-stock-rom/ --basically my instructions are the same as these. If you follow those instructions, continue to step 10 of my instructions to root your glide)
2. booted phone in download mode (up vol +pwr)
3. used Odin3 v3.07.exe to flash I927UCLH2_I927UCALH2_I927UCALH2_HOME.tar.md5
4. let the phone boot and activated my account and what not
5. went to settings>about phone, software update
6. and got the OTA AT&T push update to I927UCLJ
7. booted phone into download mode (pwr+vol up again)
8. used Odin3 v3.07.exe to flash CWRM through the recovery.tar.md5
9. restarted the phone
10. went into usb mass mode on the phone
11. put Superuser-3.2-RC3-arm-signed.zip into my external_sd folder (easiest folder for me to get to)
12. unplugged and turned off usb mass mode and turned off the phone and booted into CWRM (vol down+pwr) and flashed the superuser .zip file
13. rebooted phone
Now I have a rooted official ICS 4.0.4
14. I downloaded SuperSu and Root Explorer from the market and my sms+backup for my text messages to get restored
and everything is working smoothly!

next few goals....
1. include dman's EPM mod and Kombatant's tethering fix
2. remove bloat ware and include a different launcher
3. create a cwmr flashable rom!

dbrannon79 said:
next few goals....
1. include dman's EPM mod and Kombatant's tethering fix
2. remove bloat ware and include a different launcher
3. create a cwmr flashable rom!
Click to expand...
Click to collapse
Sounds amazing. Wish I could do you some good. But I don't know coding all that well other than CSS and a little HTML. No good for programming though. You should have the Navigation Bar, Apex Launcher, MagicLocker, SuperSu, and the bloatware removed all the while making it cwmr flashable. That would be amazing.

Hey does anyone know how to get the 14 toggles bar ? I had it in uclh2 with thegreatergoods build but can't find how to do it specific on our glide. I really miss those functions

yohan4ws said:
Hey does anyone know how to get the 14 toggles bar ? I had it in uclh2 with thegreatergoods build but can't find how to do it specific on our glide. I really miss those functions
Click to expand...
Click to collapse
Try at your own risk..
http://forum.xda-developers.com/showthread.php?t=1889272
not tested with UCLJ3

Working on a custom stock rom as we speak!

R4 14 toggle mod did not work on uclj3 .. installed via cwm6 after doing a nandroid backup but no notification bar appeared at all

yohan4ws said:
R4 14 toggle mod did not work on uclj3 .. installed via cwm6 after doing a nandroid backup but no notification bar appeared at all
Click to expand...
Click to collapse
It only works on deodexed roms! That's what I'm working on.
Sent from my SGH-I927 using Tapatalk 2

Ya I saw that as I read more, I moved my comments into that thread... If we get the smooth sailing theme, 14toggle mod, gps, camera all on UCLJ3 we're going to have a rock solid ICS on our i927's.
I'm reading up on deodex and I'll try it out later this afternoon. I found this guide here: http://forum.xda-developers.com/showthread.php?t=1600805

I would try deox...but I'd probably brick my phone -w-
hahaha

ok I finally have a possible working zip. flashing not to test before releasing!
I have had much trouble with the updater script in the zip!!
update! failed went to download mode. anyone good with the updater script? if so I'll post the zip

I just got busybox, lucky patcher, Rom Toolbox Pro, and Titanium Backup Pro...don't know what I can do with Rom Toolbox Pro though..but..I thought I saw something about something like that haha

dbrannon79 said:
ok I finally have a possible working zip. flashing not to test before releasing!
I have had much trouble with the updater script in the zip!!
update! failed went to download mode. anyone good with the updater script? if so I'll post the zip
Click to expand...
Click to collapse
Just use my updater script from my stock deodexd ROM. It'll work
Sent from my SGH-I927 using xda premium

dman3285 said:
Just use my updater script from my stock deodexd ROM. It'll work
Sent from my SGH-I927 using xda premium
Click to expand...
Click to collapse
I tried! It was able to flash but on re boot went to download mode! I'm using android kitchen .213. After building the zip and attempting to flash, I get a status 0 error!
Sent from my SGH-I927 using Tapatalk 2

I think there is a bug in the conversion from update-script to updater-script in the kitchen!
the only thing I have done to the rom so far is deodex, zipalign, root, install apex launcher and some other useful apps. also removed some useless bloat and a custom boot animation I think y'all might like
Ill post a link as soon as it uploads to google drive! it wont flash in cwmr 6 I get a status 0 error!

How did you get the rom to deodex? I installed it using xultimate but keep getting errors in Email, exchange, mobile print, phone, systemui and a couple of others...
after copying all the deodex files back on the phone and rebooting I have no phone, no email, and heaps of errors :|
I booted up an ubuntu VM and have installed android kitchen hoping it will work ...
All this just because I want to have 14toggles heh .. next twill be the gay animation menu but thats a simple fix.

yohan4ws said:
How did you get the rom to deodex? I installed it using xultimate but keep getting errors in Email, exchange, mobile print, phone, systemui and a couple of others...
after copying all the deodex files back on the phone and rebooting I have no phone, no email, and heaps of errors :|
I booted up an ubuntu VM and have installed android kitchen hoping it will work ...
All this just because I want to have 14toggles heh .. next twill be the gay animation menu but thats a simple fix.
Click to expand...
Click to collapse
I was able to deodex by using dsixda's Android Kitchen. running a ubuntu 12.04 system! as soon as I can figure out how to get it to flash properly I'll look into the toggles!
I am by no means an experienced dev! this is the first rom I have done and its just a modified stock at that! Google and xda search has been my best friend in learning!!
I am uploading the zip as we speak, my internet upload speed is slow! but it's getting there. Hope someone can find the trouble in the script!

here's a guide I found that I have been following to get started with my rom!
http://s2tip.blogspot.com/2012/01/guide-noobs-guide-to-android-roming.html

[ROM][GalaxyTab P1010][WIFI] JBROM FINAL V1.0 - New Notifications and more

The GT-P1010 it's a forgotten device by Samsung, knowing that it has the capabilities to run some of the most updated versions of android we are still waiting for advanced developers to port it, In the mean time I bring you today a themed ROM just to resemble the look of android Jelly Bean. It was a pleasure to develop for this device and you end users. In the future there will be more updates based on your feedback and if I still own the device. Now you can grab and go with your tab it has everything you need.
IMPORTANT: Advanced knowledge of what your doing it's required, I'm not responsible for the mismanagement of your device, soft-brick or hard-brick. Still, I'm here to help you with whatever you need.
WHAT'S NEW?
The Android system it's pretty much the same, the ROM is based on Android Gingerbread 2.3.6 KPO latest update for UK.
The status bar has been resized and extracted what was not needed, the toggles has been resized as well to gain more notification area on portrait and more importantly in landscape mode, added transparency too.
Theme for Settings and Main Menu is now black
Added new icons to resemble Jelly Bean.
New pop dialogs, menus, bars, buttons, radios, checks and more
Colors for the status bar clock and icons.
Added new JB keyboard
Replaced stock launcher with a modded version of Nemus Launcher, faster and very customizable.
Added new wallpapers to the gallery.
Rooted + busybox
Lockscreen animation and time position
Roboto font
New Sounds and ringtones
MXPlayer with codec
Dolphin + JetPack for full website browsing
[*]Complete animated UI
WHAT DO I NEED?
STOCK ROM GB 2.3.6 2012 July P1010XXKPO P1010XEUKPO
http://www.hotfile.com/dl/163467092/cef6ba6/P1010XXKPO_P1010XEUKPO_XEU.zip.html (mirror later)
CWM RECOVERY v5.0.2.7 + ROOT (thanks to MadTeam and Motafoca) ROM WORKS ONLY WITH THIS NO OTHER AND STOCK KERNEL [email protected]#1
http://sourceforge.net/projects/jbromgtp1010bk2/files/madteam-cwm-p1010-kpi.tar/download
ODIN v1.61
http://sourceforge.net/projects/jbromgtp1010bk2/files/ODINv1.61.zip/download
JBROM FINAL V1.0 BK201EKY
http://sourceforge.net/projects/jbromgtp1010bk2/files/NANDROID_JBROM_FINAL_V1.0_BK201EKY.rar/download
USB DRIVERS (if you need)
http://hotfile.com/dl/133929348/9107244/SAMSUNG_USB_Driver_for_Mobile_Phones_v1_3_2300_0.zip.html
PROCEDURE: For Windows only, Win7/8 x86/x64
1. MAKE A NANDROID BACKUP!!!!!!!!!!!!
http://forum.xda-developers.com/showthread.php?t=1059485
2. Charge your battery up to 40%
3. DOWNLOAD MODE: Turn off you tab, press and hold volume DOWN and POWER, A yellow triangle will appear with an android working in it, you are now in download mode.
4. ODIN: With your tab in download mode, open Odin3+v1.61.exe and plug it to the computer usb port, ID:COM text fiel most turn yellow, if not, you probably have to reinstall your USB Drivers, once that is yellow click on the PDA button and select the file: P1010KPO_P1010XEUKPO_HOME.tar.md5 and hit START in the Control Panel. After a few minutes your tab will boot in Stock KPO GB 2.3.6 android, turn off your tab again.
5. CWM Recovery + ROOT: Turn your tab into download mode once again and plug it, hit RESET in ODIN Control Panel, now click on PDA once more and select the file: madteam-cwm-p1010-kpi.tar hit START. Your tab will reboot and load android now with the Recovery Manager installed and it's now rooted (root the device may void your guaranty).
6. JBROM FINAL V1.0 BK201EKY: Transfer your downloaded file: "NANDROID_JBROM_FINAL_V1.0_BK201EKY.rar" to the following path:
"/sdcard:/clockworkmod/backup" (if doesn't exist create folders all lowercase) paste and extract here. From the app drawer selecet CMW Manager, grant superuser, select Recovery mode and Reboot, you are now in CWM Recovery. Navigate using your Vol +/- and Power as selector to: "backup and restore" then: "- restore" now: "- NANDROID_JBROM_FINAL_V1.0_BK201EKY" and finally: "Yes - Restore" once finish choose: "reboot system now" and wait ETA 5mins. Enjoy the ROM :fingers-crossed:
THANKS TO:
Wizard_Polska
bayustev
moxtrom
rfb813
Pranix
anyone else please let me know
PLEASE SUPPORT ME BY DONATING:
​
I've been BK201EKY from EL SALVADOR

I'll try this rom tonight...than i report back.(right now, my tab using kmicic)
Sent from my GT-S5300 using Tapatalk 2

well, i already try twice to flash.
1. try flash with madteam kpi from their site.(7,6mb). result : after flash jb rom is eternal bootloop.
2.i use madteam kpi from this site (3,9mb). result : stuck on odin half way when going to flash it.
any solution ? i'm back to stock first i think. and used nandroid backup to restore my previus rom.

bayustev said:
well, i already try twice to flash.
1. try flash with madteam kpi from their site.(7,6mb). result : after flash jb rom is eternal bootloop.
2.i use madteam kpi from this site (3,9mb). result : stuck on odin half way when going to flash it.
any solution ? i'm back to stock first i think. and used nandroid backup to restore my previus rom.
Click to expand...
Click to collapse
Did you follow the steps I replied on the General forum?
I would like to know if some else is having the same issue, anyway try this:
Go into Recovery mode, navigate to "mounts and storage" and format
/cache
/data
/system
/datadata
Now start the standard procedure again of installing STOCK KPO and after the ROM

I still stuck on samsung logo boot loop.
What i do is flash from begining (means froyo.had csc file ) than kpo firmware (only pda file)
After that i flash cf root.
In recovery mode i clean all. ( cache, dalvick, battery stat).
Then i flash jbrom rc1.2..wait until 4 mnts its start on samsung boot screen.... and stuck there in boot loop..
Maybe i should wait for other tester. And see the result.
send from p1010 kmicic rom tapatalk 2

bayustev said:
I still stuck on samsung logo boot loop.
What i do is flash from begining (means froyo.had csc file ) than kpo firmware (only pda file)
After that i flash cf root.
In recovery mode i clean all. ( cache, dalvick, battery stat).
Then i flash jbrom rc1.2..wait until 4 mnts its start on samsung boot screen.... and stuck there in boot loop..
Maybe i should wait for other tester. And see the result.
send from p1010 kmicic rom tapatalk 2
Click to expand...
Click to collapse
You tried to load it from FROYO? because rom is for gingerbread not froyo, I know Kmicic and David that's pretty much the best rom out there for p1010

BK201EKY said:
You tried to load it from FROYO? because rom is for gingerbread not froyo, I know Kmicic and David that's pretty much the best rom out there for p1010
Click to expand...
Click to collapse
no. of course not. it's just my procedure.flash from begining.
i flash your rom from fresh kpo..
and about kmicic.indeed a good rom..just one bug in kmicic rom. when usb debug is on, than connect to cable data to pc. always turn off again the usb conection. can't get connection to pc.
i think all rom are good because it's hard to make one.:good:
like your rom, i think is good one if i can get into.:fingers-crossed:
i just back to nandroid back up. that's all.
i wish there some dev can make cf-root from the last stock rom p1010 kpo.

bayustev said:
i wish there some dev can make cf-root from the last stock rom p1010 kpo.
Click to expand...
Click to collapse
New rom uploading, new framework and of course updater-script, I wish there were more testers like you, I thought there was a lot people wanting roms for this device, If there any ways you can spread the news, I won't get mad :good:

BK201EKY said:
New rom uploading, new framework and of course updater-script, I wish there were more testers like you, I thought there was a lot people wanting roms for this device, If there any ways you can spread the news, I won't get mad :good:
Click to expand...
Click to collapse
hey, copy my updater script from kmicic for P1010. I found errors and in my script are fixed

Well..mr wizard you help too? This is great..more hope for forgoten tabs then.love this
send from p1010 kmicic rom tapatalk 2

Wizard_Polska said:
hey, copy my updater script from kmicic for P1010. I found errors and in my script are fixed
Click to expand...
Click to collapse
Hey David how are ya? Thanks for coming by and give me some help and the chance to use your script, I'm doing some test over it right now and I can actually see a full script like CyanoMod, I wasn't really thinking on that yet considering that my script was basic for beta test and that it has always worker for me (only me I see :crying. Every advice you have for me will be very much welcome in this project knowing that your experience with this device is higher than mine. Thanks

BK201EKY said:
Hey David how are ya? Thanks for coming by and give me some help and the chance to use your script, I'm doing some test over it right now and I can actually see a full script like CyanoMod, I wasn't really thinking on that yet considering that my script was basic for beta test and that it has always worker for me (only me I see :crying. Every advice you have for me will be very much welcome in this project knowing that your experience with this device is higher than mine. Thanks
Click to expand...
Click to collapse
hey no problem, this isn't competition so you are free to copy. If you want you could copy files, edit etc.etc. from my rom.
if you want help write to me. I know how to change text under quick icons etc.

Any news mr ?
Sent from my GT-S5300 using Tapatalk 2

bayustev said:
Any news mr ?
Sent from my GT-S5300 using Tapatalk 2
Click to expand...
Click to collapse
I made some progress with new script, but colors on the screen are messed up and feels like theres is no HW acceleration, it's 2 am here gotta sleep now, hopefuly tomorrow I'll uploading, this project wont die, one way or another we'll make it work. nite

Good night sir. Nice dream.
Sent from my GT-S5300 using Tapatalk 2

I'm working right now on a way to install the rom as a nandroid backup (temporary)

Check new upload try to install please
Sent from my GT-P1010 using xda app-developers app

it works in my tablet, really nice JB look.
in a some apps (playstore for instance), a lot of fonts in black apear on black background and white in white background.
superuser doesn't work, it ask you for permission but it fails to give them (voltage control fails at boot, DPI cannot be changed, etc...), usb development didn't work either.

Great thanks for testing! You sure you installed CWM + root that I provided? Have you try updating SU from market. Titles in Playstore may appear white but they will get black when it propertly updates in a few minutes.
Sent from my GT-P1010 using xda app-developers app

i downloaded CWM from somewhere else, the file you uploaded in the first post is only 3.X MB, and cannot be flashed with odin.
I looked for the file somewhere else and the file size is about 7.4 MB.

[FIXED]·[CWM]·[Odex and Deodexed]·Lidroid 14 toggles for the latest stock rom·

LIDROID 14 TOGGLES FOR THE LATEST STOCK ROM​
Disclaimer:
I will not be held responsible if you brick your ROM, nor will I held responsible if your phone is permanently dead for reasons of your own stupidity. Even though my small contributions to XDA-Developers are harmless, they may turn evil and attack your phone. Crying, pain, beatings and even death may be caused by this. I may be able to correct what you have done to your phone but successful recovery or data recovery is not guaranteed. SO PLEASE DO A NANDROID BACKUP
REQUIREMENTS
- Latest stock ROM (The one before latest works too)
- Knowledge of flashing ZIPs (tutorial below)
- A Nandroid backup (I cannot stress how important this is)
- Root access (May work without)
- ClockWorkMod​
COMPATIBILITY
Totoro:
- GT-S5360
- GT-S6102​
FEATURES
- Rearrange the toggles
- Ability to disable unwanted toggles
- The brightness and sound toggles can be customized
- All the toggles have indicators
- The reboot icon can boot into recovery, download mode or just do a normal reboot.​
KNOWN BUGS
- Flashlight toggle will take some time to turn on then it will just turn off (I recommend you disable this.)
- 'Reboot into download mode' doesn't work on S5830i, it just does a normal reboot​.
CREDITS
Lidroid - @ THIS THREAD- For source
lohanbarth - For flashlight fix on Ace-i now on Galaxy Y!​
INSTRUCTIONS
1) Download the correct ZIP for your rom at the bottom on this thread. (Odexed or deodexed)
2) Put the zip file on your phones SD card
3) Reboot into recovery and then flash ClockWorkMod if needed.
4) Select: 'Choose zip from SD' then install the zip file you downloaded into your SD card.
5) Wipe cache partition and wipe Dalvik cache.
6) Reboot and enjoy!​
TROUBLESHOOTING
It installs but doesn't do anything! --> Download and install the deodex ZIP file and navigate to /system/app and manually delete SystemUI.odex using 'Root Browser' or a similar application.
When I connect my phone to my PC 'USB Connected' Doesn't show up! --> Make sure you follow ALL the steps and redo Step 5. Report back here with the results.
​
All files are at the bottom of this thread.
Screenshots also at the bottom of this thread.​

Reserve. XD So you work for SGY Also Nice!

Cool
Let Us Hunt Those Who Have Fallen into Darkness

.::Fear::. said:
Cool
Let Us Hunt Those Who Have Fallen into Darkness
Click to expand...
Click to collapse
Does it work for you? Bug free? If so can I have the details of your ROM please?

DamnTarget said:
LIDROID 14 TOGGLES FOR THE LATEST STOCK ROM​
Disclaimer:
I will not be held responsible if you brick your ROM, nor will I held responsible if your phone is permanently dead for reasons of your own stupidity. Even though my small contributions to XDA-Developers are harmless, they may turn evil and attack your phone. Crying, pain, beatings and even death may be caused by this. I may be able to correct what you have done to your phone but successful recovery or data recovery is not guaranteed. SO PLEASE DO A NANDROID BACKUP
THIS IS NOT GUARANTEED TO WORK, I DO NOT OWN A GALAXY Y. SO READ THE DISCLAIMER
REQUIREMENTS
- Latest stock ROM (The one before latest works too)
- Knowledge of flashing ZIPs (tutorial below)
- A Nandroid backup (I cannot stress how important this is)
- Root access (May work without)
- ClockWorkMod​
COMPATIBILITY
Totoro:
- GT-S5360
- GT-S6102​
FEATURES
- Rearrange the toggles
- Ability to disable unwanted toggles
- The brightness and sound toggles can be customized
- All the toggles have indicators
- The reboot icon can boot into recovery, download mode or just do a normal reboot.​
KNOWN BUGS
- Flashlight toggle will take some time to turn on then it will just turn off (I recommend you disable this.)
- 'Reboot into download mode' doesn't work on S5830i, it just does a normal reboot​.
CREDITS
Lidroid - @ THIS THREAD- For source
lohanbarth​
INSTRUCTIONS
1) Download the correct ZIP for your rom at the bottom on this thread. (Odexed or deodexed)
2) Put the zip file on your phones SD card
3) Reboot into recovery and then flash ClockWorkMod if needed.
4) Select: 'Choose zip from SD' then install the zip file you downloaded into your SD card.
5) Wipe cache partition and wipe Dalvik cache.
6) Reboot and enjoy!​
TROUBLESHOOTING
It installs but doesn't do anything! --> Download and install the deodex ZIP file and navigate to /system/app and manually delete SystemUI.odex using 'Root Browser' or a similar application.
When I connect my phone to my PC 'USB Connected' Doesn't show up! --> Make sure you follow ALL the steps and redo Step 5. Report back here with the results.
​
All files are at the bottom of this thread.
Screenshots also at the bottom of this thread.​
Click to expand...
Click to collapse
I have latest stock rom DDMD1, Which version should i flash ( odex or deodex), here is two introstruction and trouble shooting, both method should do or only instruction part...plz help coz i'm new, post some ss plz.

imElectronica said:
I have latest stock rom DDMD1, Which version should i flash ( odex or deodex), here is two introstruction and trouble shooting, both method should do or only instruction part...plz help coz i'm new, post some ss plz.
Click to expand...
Click to collapse
If you have flashed DDMD1 via ODIN,flash the odex file.

Anyone use this, is it works or not.......Devs post some SS plz..

imElectronica said:
I have latest stock rom DDMD1, Which version should i flash ( odex or deodex), here is two introstruction and trouble shooting, both method should do or only instruction part...plz help coz i'm new, post some ss plz.
Click to expand...
Click to collapse
You follow the instructions. Use the troubleshooting section if you encounter any problems.

DamnTarget said:
You follow the instructions. Use the troubleshooting section if you encounter any problems.
Click to expand...
Click to collapse
In the trouble shooting section there is saying "Install the deodex zip" means install through CWM recovery....?

imElectronica said:
In the trouble shooting section there is saying "Install the deodex zip" means install through CWM recovery....?
Click to expand...
Click to collapse
Yes. I posted screenshots on how it looks like on Ace-i because I do not own a Galaxy Y.

DamnTarget said:
Yes. I posted screenshots on how it looks like on Ace-i because I do not own a Galaxy Y.
Click to expand...
Click to collapse
After Installing the "Lidroid_Totoro_DamnTarget_ODEX.zip", n follow the procedure u've written I found My status bar is gone and got a message like this (in the thumbnail)....thanks god I've nandroid backup.

imElectronica said:
After Installing the "Lidroid_Totoro_DamnTarget_ODEX.zip", n follow the procedure u've written I found My status bar is gone and got a message like this (in the thumbnail)....thanks god I've nandroid backup.
Click to expand...
Click to collapse
Thanks for the feedback, this is a test and I though it wouldn't work. I'll see what I can do about it.

DamnTarget said:
Thanks for the feedback, this is a test and I though it wouldn't work. I'll see what I can do about it.
Click to expand...
Click to collapse
then the ss are fake.....

imElectronica said:
then the ss are fake.....
Click to expand...
Click to collapse
The screenshots are from Ace-i.

DamnTarget said:
The screenshots are from Ace-i.
Click to expand...
Click to collapse
Plz mode it correctly coz i need it badly with my stock rom.

imElectronica said:
Plz mode it correctly coz i need it badly with my stock rom.
Click to expand...
Click to collapse
I'm working on it.

DamnTarget said:
I'm working on it.
Click to expand...
Click to collapse
Mode it soon.....

Does it work with DXLF1 stock rom?

Nope, it doesn't work at all. I'm too busy to start yet, but I'll try ASAP.
Sent from my GT-S5830i using Tapatalk 2

I installed in stock odex DDMD1 .. all good. but Flashlight not working.. i need it badly.. plz Fix it ..Urgent...
Sent from my GT-S5360 using xda app-developers app